128 lines
7.8 KiB
Text
128 lines
7.8 KiB
Text
---
|
|
title: "Updating to boot9strap" #
|
|
lang: en
|
|
permalink: /updating-to-boot9strap.html
|
|
---
|
|
|
|
This page is for existing arm9loaderhax users to update their devices to boot9strap.
|
|
{: .notice--info}
|
|
|
|
All future releases of Luma3DS will only be made in the `.firm` format, which will only be compatible with boot9strap and sighax. This means that to continue receiving the latest updates of Luma3DS, you should use this page to update your installation.
|
|
{: .notice--info}
|
|
|
|
If you have a PIN set on Luma, you must temporarily turn it off to do these steps. You can re-enable the PIN after the update.
|
|
{: .notice--info}
|
|
|
|
To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
|
|
{: .notice--info}
|
|
|
|
#### What you need
|
|
|
|
Note that the following required file named `secret_sector.bin` is the same one that was found in the various `data_input.zip` file versions. If you already have that file on your disk somewhere, you can use that one instead of downloading the one below.
|
|
{: .notice--info}
|
|
|
|
Note that `secret_sector.bin` is needed to revert the arm9loaderhax exploit, which is why it is not needed for the installation of boot9strap on a stock console.
|
|
{: .notice--info}
|
|
|
|
* <i class="fa fa-magnet" aria-hidden="true" title="This is a magnet link. Use a torrent client to download the file."></i> - [`secret_sector.bin`](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce)
|
|
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
|
|
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest)
|
|
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
|
|
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
|
|
|
|
#### Instructions
|
|
|
|
##### Section I - Prep Work
|
|
|
|
1. Power off your device
|
|
1. Insert your SD card into your computer
|
|
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
|
1. Create a folder named `cias` on the root of your SD card if it does not already exist
|
|
1. Copy `lumaupdater-v2.0.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card
|
|
1. Create a folder named `boot9strap` on the root of your SD card
|
|
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
|
|
1. Delete any existing `.bin` payloads in the `/luma/payloads/` folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions
|
|
1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the `/luma/payloads/` folder on your SD card
|
|
1. Rename `SafeB9SInstaller.bin` in the `/luma/payloads/` folder on your SD card to `start_SafeB9SInstaller.bin`
|
|
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
|
1. Copy `secret_sector.bin` to the `/boot9strap/` folder on your SD card
|
|
|
|
|
|
{: .notice--info}
|
|
|
|
1. Reinsert your SD card into your device
|
|
|
|
##### Section II - Installing boot9strap
|
|
|
|
1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
|
|
+ Some versions of Luma3DS will just directly start whichever payload begins with `start_`
|
|
+ If your version does this, just proceed with the instructions
|
|
1. Launch SafeB9SInstaller by pressing (A) on it
|
|
1. Wait for all safety checks to complete
|
|
1. When prompted, input the key combo given to install boot9strap
|
|
1. Once it has completed, your device will reboot automatically
|
|
+ If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
|
|
|
##### Section III - Configuring Luma3DS
|
|
|
|
This section is only needed if you are prompted with the Luma3DS configuration menu after the reboot.
|
|
{: .notice--info}
|
|
|
|
1. In the Luma3DS configuration menu, use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. Press (Start) to save and reboot
|
|
|
|
##### Section IV - CTRNAND Luma3DS
|
|
|
|
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
|
|
1. Launch GodMode9 by pressing (A)
|
|
1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
|
|
1. Press (X) on `start_SafeB9SInstaller.bin` to delete it
|
|
1. Press (A) to confirm
|
|
1. Press (B) to return to `[0:] SDCARD`
|
|
1. Press (Y) on `boot.firm` to copy it
|
|
1. Press (B) to return to the main menu
|
|
1. Navigate to `[1:] SYSNAND CTRNAND`
|
|
1. Press (Y) to paste a copy of `boot.firm`
|
|
1. Select "Copy path(s)"
|
|
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
|
|
1. Press (X) on `arm9loaderhax.bin` to delete it
|
|
+ If you do not have this file, just proceed with the instructions
|
|
1. Press (A) to confirm
|
|
1. Press (B) to return to the main menu
|
|
1. Hold (R) and press (B) at the same time to eject your SD card
|
|
1. Remove your SD card from your device
|
|
1. Press (Start) to reboot your device with your SD card removed
|
|
+ Booting your device at least once with your SD card removed will allow you to configure the CTRNAND based Luma3DS installation
|
|
1. Use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. Reinsert your SD card into your device
|
|
1. Press (Start) to save and reboot
|
|
|
|
##### Section V - Installing Luma3DS Updater
|
|
|
|
1. Launch FBI
|
|
1. Navigate to `SD` -> `cias`
|
|
1. Select `lumaupdater-v2.0.cia`
|
|
1. Select the "Install CIA" option, then press (A) to confirm
|
|
1. Press (Home) to exit FBI
|
|
|
|
___
|
|
|
|
You can now remove any arm9loaderhax related files from your SD card, such as `arm9loaderhax.bin` on the root of your SD card and the `files9` folder on your SD card.
|
|
{: .notice--info}
|
|
|
|
Note that `firm0firm1.bak` and `sector0x96.bak` in the `/boot9strap/` folder on your SD card are only needed in the event of a failed boot9strap install. Once you have installed successfully, you can delete these two files.
|
|
{: .notice--info}
|
|
|
|
This fork of Luma3DS Updater allows for boot9strap compatibility by downloading and extracting the latest Luma3DS `boot.firm` for you.
|
|
{: .notice--info}
|
|
|
|
{% capture notice-6 %}
|
|
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
|
|
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
|
|
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
|
|
{% endcapture %}
|
|
|
|
<div class="notice--info">{{ notice-6 | markdownify }}</div>
|