Guide_3DS/_pages/he_IL/finalizing-setup.txt

---
title: "סיום התהליך"
---

{% include toc title="תוכן העניינים" %}

### קריאה דרושה

The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the device, allowing it to run homebrew software.

On this page, we will make critical system file backups and install the following homebrew programs:

+  **FBI** *(installs CIA formatted applications)*
+  **Anemone3DS** *(מתקין ערכות נושא מותאמות אישית)*
+  **Checkpoint** *(מגבה ומשחזר שמירות למשחקי 3DS וDS)*
+  **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
+ **GodMode9** *(כלי רב שימושי אשר מסוגל לבצע פונקציות הקשורות ל-NAND ולקלטות משחק)*
+  **Homebrew Launcher Loader** *(מפעיל את הHomebrew Launcher)*

It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files.
{: .notice--warning}

### Compatibility Notes

If your **New 3DS** was on version 2.1.0 before following this guide, you should [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before continuing. This likely doesn't apply to you unless you were following this guide in 2017.
{: .notice--warning}

If your previous CFW setup was EmuNAND-based and you wish to move the contents of your EmuNAND/RedNAND to SysNAND, follow [Move EmuNAND](move-emunand) before following this page. If you don't know what an EmuNAND is, this doesn't apply to you.
{: .notice--info}

### What You Need

* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
* The v3.7.4 release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)

### הנחיות

#### חלק I - הכנות

In this section, you will copy the files necessary to follow the rest of the instructions on this page.

1. תכבו את המכשיר
1. תכניסו את ה-SD שלכם למחשב
1. צרו תיקייה בשם `cias` בתיקיית האם של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו
1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card
1. Create a folder named `3ds` on the root of your SD card if it does not already exist
    + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates
1. תעתיקו את 'FBI.3dsx' לתיקיה '/ 3ds /' על כרטיס הזכרון
1. צרו תיקייה בשם `payloads` בתיקיית `luma` של כרטיס ה- SD שלכם אם לא קיימת תיקייה כזו
1. העתיקו את `GodMode9.firm` מהזיפ של GodMode9 אל תיקיית /luma/payloads/ ב- SD שלכם
1. תעתיקו את התיקייה `gm9` מתוך ה`.zip` של GodMode9 ל-SD שלכם
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
1. תפעילו את המכשיר

The screenshots below indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.

![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}

![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
{: .notice--info}



#### חלק II - עדכון המערכת

In this section, you will update your system to the latest version, which is safe to do with custom firmware.

1. עדכנו את המכשיר שלכם על ידי לחיצה על System Sttings, לאחר מכן "Other Settings", לכו ימינה עד הסוף ואז לחצו על "System Update"
  + עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
  + The updater may display a message saying "Your system is up to date" instead of updating. This is normal if you are already up to date; continue with the next section
  + If this gives you an error, set both your DNS settings and Proxy settings to "auto"
  + If this still gives you an error, [follow this troubleshooting guide](troubleshooting#finalizing-setup)

#### Section III - Homebrew Launcher

In this section, you will temporarily replace Download Play with Homebrew Launcher (which we need to launch FBI). Download Play will automatically go back to normal once you reboot your device.

1. Launch the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
1. Wait until you see the `Nintendo 3DS` and `Nintendo DS` buttons
1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
1. תבחרו ב "Miscellaneous options"
1. תבחרו ב "Switch the hb. title to the current app."
1. תלחצו (B) כדי להמשיך
1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina
1. תלחצו (B) כדי לצאת מהתפריט של Rosalina
1. תלחצו על (Home), ואז תסגרו את Download Play
1. תפעילו את Download Play
1. המכשיר שלכם אמור לטעון את הHomebrew Launcher
  + If your device is stuck on the loading splash screen, you are missing `boot.3dsx` from the root of your SD card

#### Section IV - RTC and DSP Setup

In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly).

1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
1. תבחרו ב "Miscellaneous options"
1. Select "Dump DSP firmware"
1. תלחצו (B) כדי להמשיך
1. Select "Nullify user time offset"
1. תלחצו (B) כדי להמשיך
1. תלחצו (B) כדי לחזור לתפריט הראשי של Rosalina
1. תלחצו (B) כדי לצאת מהתפריט של Rosalina

#### Section V - Installing CIAs

In this section, you will install several useful homebrew applications to HOME Menu.

1. תפעילו את FBI מרשימת הhomebrew שלכם
1. נווטו אל `SD` ושם אל `cias`
1. לחצו על "\<current directory>"
1. תבחרו את האופציה "Install and delete all CIAs", ולאחר מכן לחצו על (A) לאישור
1. תלחצו על (Home), ואז תסגרו את Download Play

#### חלק VI - Luma3DS על ה- CTRNAND

In this section, you will use a script to copy some of Luma3DS's files to internal memory so that they can be accessed, even without an SD card inserted.

1. תכבו את המכשיר
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
  + If you do not boot into GodMode9, ensure that `GodMode9.firm` is in `/luma/payloads/` and that `payloads` is correctly spelled
1. אם תתבקשו לעשות גיבוי של קבצים חיוניים, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך אחרי שזה סיים
1. אם אתם מתבקשים לתקן את זמן ותאריך הRTC, תלחצו (A) כדי לעשות זאת, ואז תלחצו (A) כדי להמשיך
1. תלחצו על (Home) כדי להראות את תפריט הפעולה
1. תבחרו "Scripts..."
1. Select "GM9Megascript"
1. Select "Scripts from Plailect's Guide"
1. Select "Setup Luma3DS to CTRNAND"
1. כשתתבקשו, תלחצו (A) כדי להמשיך
1. לחצו (A) כדי לפתוח גישת כתיבת lvl1 לSysNAND, ואז תלחצו על המקשים בסדר הנכון
1. תלחצו (A) כדי להמשיך

#### Section VII - Cleanup SD Card

In this section, you will use a script to remove some unnecessary files from your SD card.

1. Select "Cleanup SD Card"
1. כשתתבקשו, תלחצו (A) כדי להמשיך
1. תלחצו (A) כדי להמשיך
1. תלחצו (B) כדי לחזור לתפריט הראשי

#### Section VIII - Backup Essential Files

In this section, you will make backups of files that can be used to recover from software bricks or to recover data.

1. Select "Backup Options"
1. Select "SysNAND Backup"
1. תלחצו (A) כדי לאשר
  + זה ייקח קצת זמן
  + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
1. תלחצו (A) כדי להמשיך
1. תלחצו (B) כדי לחזור לתפריט הראשי
1. Select "Exit"
1. תלחצו (A) כדי לנעול הרשאות כתיבה אם תתבקשו
1. Navigate to `[S:] SYSNAND VIRTUAL`
1. Press (A) on `essential.exefs` to select it
1. Select "Copy to 0:/gm9/out"
  + If you see "Destination already exists", press (A) on "Overwrite file(s)"
1. תלחצו (A) כדי להמשיך
1. תלחצו על (Home) כדי להראות את תפריט הפעולה
1. Select "Poweroff system" to power off your device
1. תכניסו את ה-SD שלכם למחשב
1. Copy `<date>_<serialnumber>_sysnand_##.bin`, `<date>_<serialnumber>_sysnand_##.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
  + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
  + These backups will save you from a brick and/or help you recover files from the NAND image if anything goes wrong in the future
1. Delete `<date>_<serialnumber>_sysnand_##.bin` and `<date>_<serialnumber>_sysnand_##.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
  + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. If you have it, copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
1. תפעילו את המכשיר

___

You're done! Custom firmware is now fully configured on your device.
{: .notice--success}

Hello! We're looking for feedback on the overall experience of following our guide. If you'd like to help out, check out the survey [here](https://forms.gle/vZNoc4QLCz5MEXCK7) (only available in English). Thanks!
{: .notice--info}

### Information and Notes

{% capture notice-6 %}
Here are some key combos that you should know:

- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}

<div class="notice--info">{{ notice-6 | markdownify }}</div>

See [here](https://3ds.eiphax.tech/tips.html) for some suggestions on things to do with custom firmware.
{: .notice--info}

For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) and [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges) pages.
{: .notice--info}