83 lines
4.2 KiB
Text
83 lines
4.2 KiB
Text
---
|
|
title: "Installing boot9strap (HBL-USM)"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
### Required Reading
|
|
|
|
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
|
|
|
|
As we already have Homebrew access, we can use slotTool to do this.
|
|
|
|
This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
|
|
|
|
If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
|
|
|
|
Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
|
|
|
|
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
|
|
|
|
If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
|
|
{: .notice--danger}
|
|
|
|
### What You Need
|
|
|
|
* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
|
|
* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
|
|
|
|
#### Section I - Prep Work
|
|
|
|
1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
|
|
1. Launch slotTool from the list of homebrew
|
|
+ If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
|
|
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
|
|
+ You will see some on-screen text and then your system will shut down
|
|
1. Remove your SD card from your console and connect it to your computer
|
|
1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
|
|
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
|
|
1. Put your SD card back into your console
|
|
|
|
#### Section II - unSAFE_MODE
|
|
|
|
1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
|
|
+ Keep holding the buttons until the console boots into Safe Mode
|
|
1. Press "OK" to accept the update
|
|
+ There is no update. This is part of the exploit
|
|
1. Press "I accept" to accept the terms and conditions
|
|
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
|
|
1. When asked "Would you like to configure Internet settings?", select "Yes"
|
|
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
|
|
+ Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
|
|
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
|
|
|
|
#### Section III - Configuring Luma3DS
|
|
|
|
1. Your device should automatically show the Luma Configuration menu
|
|
1. Use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. Press (Start) to save and reboot
|
|
+ Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
|
|
|
|
#### Section IV - Restoring WiFi Configuration Profiles
|
|
|
|
1. Launch the Download Play application
|
|
1. Wait until you see the two buttons
|
|
+ Do not press either of the buttons
|
|
1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
|
|
1. Select "Miscellaneous options"
|
|
1. Select "Switch the hb. title to the current app."
|
|
1. Press (B) to continue
|
|
1. Press (B) to return to the Rosalina main menu
|
|
1. Press (B) to exit the Rosalina menu
|
|
1. Press (Home), then close Download Play
|
|
1. Relaunch the Download Play application
|
|
1. Your device should load the Homebrew Launcher
|
|
1. Launch slotTool from the list of homebrew
|
|
1. Select "RESTORE original wifi slots 1,2,3"
|
|
1. Your device will then reboot
|
|
|
|
___
|
|
|
|
### Continue to [Finalizing Setup](finalizing-setup)
|
|
{: .notice--primary}
|