a4cc9fb709
remove luma config step remove boot9/boot11 backup from gm9 section (now performed by luma) small uniformity fixes
37 lines
No EOL
1.8 KiB
Text
37 lines
No EOL
1.8 KiB
Text
---
|
|
title: "Installing boot9strap (SafeB9SInstaller)"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
### Instructions
|
|
|
|
#### Section I - Launching SafeB9SInstaller
|
|
|
|
1. Launch udsploit from the list of homebrew
|
|
1. Once you see `patching kernel... done`, press (Start) to exit udsploit
|
|
+ This may take several tries
|
|
+ If it freezes, just force the console to power off by holding the power button, then try again
|
|
1. Launch safehax from the list of homebrew
|
|
+ If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
|
|
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
|
|
+ If it freezes, just force the console to power off by holding the power button, then try again
|
|
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
|
|
|
#### Section II - Installing boot9strap
|
|
|
|
1. When prompted, input the key combo given on the top screen to install boot9strap
|
|
1. Once it is complete, press (A) to reboot your device
|
|
1. Your device should have rebooted into the Luma3DS configuration menu
|
|
+ If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
|
|
1. Press (Start) to save and reboot
|
|
+ If you get an error, just continue to the next page
|
|
|
|
At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
|
|
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
|
|
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
|
|
|
|
___
|
|
|
|
### Continue to [Finalizing Setup](finalizing-setup)
|
|
{: .notice--primary} |