Guide_3DS/_pages/es_ES/installing-boot9strap-(hbl-usm).txt

---
title: "Installing boot9strap (HBL-USM)"
---

{% include toc title="Tabla de contenidos" %}

### Lectura requerida

Para pode aprovechar el exploit del firmware SAFE_MODE de nuestro sistema, necesitamos inyectar un perfil de WiFi con el exploit.

As we already have Homebrew access, we can use slotTool to do this.

Una vez que el perfil de WiFi ha sido inyectado, usaremos SAFE_MODE, que consiste en una función de recuperación presente en todas las consolas, para activar el perfil de WiFi con el exploit.

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--danger}

### Qué necesitas

* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
  * You may already have this from a prior section of the guide

#### Sección I - Preparativos

1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
1. Launch slotTool from the list of homebrew
  + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
  + You will see some on-screen text and then your system will shut down
1. Remove your SD card from your console and connect it to your computer
1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de `boot9strap` a la carpeta `/boot9strap/` en tu tarjeta SD
1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
1. Put your SD card back into your console

#### Section II - unSAFE_MODE

1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
  + Mantén pulsados los botones hasta que la consola encienda en modo seguro
  + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
1. Presiona "OK" para aceptar la actualización
  + No hay actualización. Esto es parte del exploit
1. Presiona sobre "Acepto" para aceptar los términos y condiciones
1. The update will eventually fail, with the error code `003-1099`. Este comportamiento es el esperado
1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", selecciona "Aceptar"
1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados`
  + Esto es una [representación visual](https://uwuu.ca/images/safemode_highlighted.png)
1. Si el exploit ha funcionado, la consola habrá iniciado SafeB9SInstaller

#### Sección III - Instalar boot9strap

1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
  + If the top screen is blank, power off your device and re-do Section III
1. Once it is complete, press (A) to reboot your device
1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
  + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Presiona (Start) para guardar y reiniciar

At this point, your console will boot to Luma3DS by default.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will install useful homebrew applications to complete your setup.

#### Section IV - Restoring WiFi Configuration Profiles

1. Inicia la aplicación de Modo Descarga
1. Espera hasta que veas los dos botones
  + Do not press either of the buttons
1. Presiona (Left Shoulder) + (Abajo) + (Select) a la vez para abrir el menú de Rosalina
1. Selecciona "Miscellaneous options"
1. Selecciona "Switch the hb. title to the current app."
1. Presiona (B) para continuar
1. Presiona (B) para regresar al menú principal de Rosalina
1. Presiona (B) para salir del menú de Rosalina
1. Presiona (Home), luego cierra la aplicación de Modo Descarga
1. Relaunch the Download Play application
1. Tu consola debería cargar el Homebrew Launcher
1. Launch slotTool from the list of homebrew
1. Select "RESTORE original wifi slots 1,2,3"
1. Your device will then reboot

___

### Continúa en [Finalizar instalación](finalizing-setup)
{: .notice--primary}