57 lines
No EOL
3.1 KiB
Text
57 lines
No EOL
3.1 KiB
Text
---
|
|
title: "Installing boot9strap (2xrsa)"
|
|
---
|
|
|
|
#### 준비물
|
|
|
|
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
|
* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
|
|
* 홈브류 [스타터 킷](http://smealum.github.io/ninjhax2/starter.zip)
|
|
|
|
#### 진행 방법
|
|
|
|
##### 섹션 I - 준비 작업
|
|
|
|
1. 기기를 종료해 주세요.
|
|
1. SD 카드를 컴퓨터에 삽입해 주세요.
|
|
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
|
1. Copy _the contents of_ `starter.zip` to the root of your SD card
|
|
1. Create a folder named `boot9strap` on the root of your SD card
|
|
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
|
1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
|
|
1. SD 카드를 기기에 다시 삽입해 주세요.
|
|
1. Power on your device
|
|
|
|
##### Section II - Launching SafeB9SInstaller
|
|
|
|
1. Launch the browser and go to the following URL on your device
|
|
+ `http://2xrsa.3ds.guide`
|
|
+ If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
|
|
+ "서비스 불가능 지역입니다. (This service is not available in your region)" 오류가 뜬다면 본체 설정에서 기기의 국적을 2.1.0 CTRTransfer에서 설치한 NAND의 지역에 맞게 바꿔 주세요.
|
|
+ CTRTransfer 작섭 중 청소년 보호 기능을 끄는 것을 깜박했거나 다른 이유로 무선 통신 설정에 접속할 수 없다면, 기기가 `attwifi`라는 이름의 네트워크에 비밀번호 없이 자동으로 접속할 것이라는 것을 명심해 주세요.
|
|
+ 다른 오류가 뜨면 이 [문제 해결 가이드](troubleshooting#ts_browser)를 참고해 주세요.
|
|
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
|
|
|
##### Section III - Installing boot9strap
|
|
|
|
1. Wait for all safety checks to complete
|
|
1. When prompted, input the key combo given to install boot9strap
|
|
1. Once it has completed, press (A) to reboot your device
|
|
|
|
##### Section IV - Configuring Luma3DS
|
|
|
|
1. Your device should have rebooted into the Luma3DS configuration menu
|
|
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
|
|
1. Use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요.
|
|
+ If you get an error, just continue the next page
|
|
|
|
___
|
|
|
|
Note that *New 3DS* users who ended up on 2.1.0 after a CTRTransfer *must* [restore their NAND backup](godmode9-usage#nand_restore) between "Section II - Configuring Luma3DS" and "Section III - Updating the System" of [Finalizing Setup](finalizing-setup).
|
|
{: .notice--danger}
|
|
|
|
Continue to [Finalizing Setup](finalizing-setup)
|
|
{: .notice--primary} |