Guide_3DS/_pages/en_PT/installing-boot9strap-(ntrboot).txt
2018-11-18 19:16:40 -05:00

86 lines
No EOL
3.5 KiB
Text

---
title: "Installing boot9strap (ntrboot)"
---
#### What ye need
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* Th' latest release 'o [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* Th' latest release 'o [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not th' `devkit` file, not th' `ntr` file)*
* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
* Th' Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
#### Instructions
##### Section I - Set th' sails (prep work)
1. Power off your device
1. Insert ye SD card into ye computer
1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
1. Copy _th' contents 'o_ `starter.zip` to th' root 'o ye SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
![]({{ base_path }}/images/screenshots/boot9strap-ntrboot-file-layout.png)
{: .notice--info}
1. Reinsert ye SD card into ye device
1. Power on your device
##### Section II - ntrboot
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
+ This step is not needed on the old 2DS (which has a sleep mode switch)
1. Power off your device
1. Insert your flashcart into your device
1. Place the magnet on your device to trigger the sleep sensor
+ On old 2DS, you should instead enable the sleep mode switch
1. Hold (Power) + (Start) + (Select) + (X) for several seconds, then release the buttons
+ It may take a few attempts to get this to work because the positioning is awkward
1. If the exploit was successful, you will have booted into SafeB9SInstaller
##### Section III - Installing boot9strap
1. Wait fer all safety checks to be completed
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, force your device to power off by holding down the power button
+ Your device will only boot to the SafeB9SInstaller screen until the next section is completed
##### Section IV - Configuring Luma3DS
1. Insert ye SD card into ye computer
1. Delete `boot.firm` from the root of your SD card
1. Copy `boot.firm` from th' Luma3DS `.7z` to th' root 'o ye SD card
1. Reinsert ye SD card into ye device
1. Power on your device
1. Your device should have booted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Press (Start) to save 'n reboot
+ If ye be gettin' an error, jus' continue to th' next page
___
Continue to [Finalizin' Setup](finalizing-setup)
{: .notice--primary}
___
##### Section V - Removing ntrboot
This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
{: .notice--info}
Do not follow this section until you have completed the rest of the instructions on this page.
{: .notice--warning}
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
1. Select "ntrboot_flasher"
1. Select "Restore Flash"
1. Press (Y) to proceed
1. Wait 'til th' process be completed
1. Press (B) to return to the main menu
1. Select "EXIT" to power off **the source 3DS**