Guide_3DS/_pages/fi_FI/installing-boot9strap-(2xrsa).txt
2018-11-18 19:16:28 -05:00

57 lines
No EOL
3 KiB
Text

---
title: "Installing boot9strap (2xrsa)"
---
#### What you need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
#### Instructions
##### Section I - Prep Work
1. Power off your device
1. Insert your SD card into your computer
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. Copy _the contents of_ `starter.zip` to the root of your SD card
1. Create a folder named `boot9strap` on the root of your SD card
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Reinsert your SD card into your device
1. Power on your device
##### Section II - Launching SafeB9SInstaller
1. Launch the browser and go to the following URL on your device
+ `http://2xrsa.3ds.guide`
+ If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
+ Jos saat virheen "This service is not available in your region", käytä järjestelmäasetuksia (System Settings) asettaaksesi konsolisi maan samaksi kuin CTRTransferilla asentamasi NAND-alue
+ Huomaa, että jos unohdit poistaa lapsilukon käytöstä ennen CTRTransferia tai jos et muuten vain pääse verkkoasetuksiin, konsolisi yhdistää automaattisesti mihin tahansa salasanattomaan verkkoon, jonka nimi on `attwifi`
+ Jos saat jonkin toisen virheen, [seuraa tätä vianmääritysohjetta](troubleshooting#ts_browser)
1. If the exploit was successful, you will have booted into SafeB9SInstaller
##### Section III - Installing boot9strap
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
##### Section IV - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
1. Paina (START)-painiketta tallentaaksesi ja käynnistääksesi uudelleen
+ If you get an error, just continue the next page
___
Note that *New 3DS* users who ended up on 2.1.0 after a CTRTransfer *must* [restore their NAND backup](godmode9-usage#nand_restore) between "Section II - Configuring Luma3DS" and "Section III - Updating the System" of [Finalizing Setup](finalizing-setup).
{: .notice--danger}
Continue to [Finalizing Setup](finalizing-setup)
{: .notice--primary}