774e84f465
Apparently, this is the correct way to do markdown indents. This should allow portability of markdown files, should we ever move elsewhere.
14 lines
No EOL
1.4 KiB
Text
14 lines
No EOL
1.4 KiB
Text
In this section, you will enter Safe Mode (a feature available on all 3DS family consoles) and navigate to a menu where unSAFE_MODE will be triggered, which will launch you into the boot9strap (custom firmware) installer.
|
|
|
|
1. With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
|
|
+ Keep holding the buttons until the console boots into Safe Mode (a "system update" menu)
|
|
1. Press "OK" to accept the update
|
|
+ There is no update. This is part of the exploit
|
|
1. Press "I accept" to accept the terms and conditions
|
|
1. The update will eventually fail, with the error code `003-1099`. This is intended behaviour
|
|
1. When asked "Would you like to configure Internet settings?", select "Yes"
|
|
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup` ([image](/images/screenshots/usm/safemode_highlighted.png))
|
|
1. If the exploit was successful, your console will have booted into SafeB9SInstaller
|
|
+ If your console instead freezes on a white screen, hold the POWER button until it turns off, then retry this section
|
|
+ If your console instead freezes on a red screen, you are missing `usm.bin` from the root of your SD card
|
|
+ If you get a different error, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-usm) |