N-archive/Guide_3DS
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Guide_3DS/_pages/no_NO/Installing-arm9loaderhax.txt
Plailect 887c749dd8
merge l10n
2018-11-18 19:15:24 -05:00

241 lines
No EOL
17 KiB
Text
Raw Blame History

---
title: "Installing arm9loaderhax" #
lang: en
permalink: /installing-arm9loaderhax.html
---
The final Step of this guide is to install arm9loaderhax and setup Luma3DS to run just milliseconds into the boot. Dette blir oppnådd ved å bruke SafeA9LHInstaller fra [AuroraWright](https://github.com/AuroraWright/).
{: .notice}
Dette vil installere [AuroraWright's gren](https://github.com/AuroraWright/arm9loaderhax) av arm9loaderhax.
{: .notice--info}
Vi kommer også til å sette opp muligheten til å starte payloads fra arm9loaderhax, noe som gir oss muligheten til å unbricke SysNAND fra situasjoner som normalt ville bricke oss ved å gjenopprette fra en sikkerhetskopi.
{: .notice--info}
**Du kan ikke bruke en annen konsolls OTP det vil GARANTERT føre til en bricket enhet.**
{: .notice--danger}
#### Oversikt over trinnene
I denne seksjonen, vil vi gå gjennom prosessen som alle de andre trinnene har ledet opp til: å faktisk installere arm9loaderhax.
This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install.
Filen `arm9loaderhax.bin` er det som startes av arm9loaderhax, etter at den er ferdig med å laste NAND, og kan være enhver gyldig arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot.
In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space.
Once arm9loaderhax is installed and Luma3DS is setup with the correct options, we then restore our previous backup.
During this process, we also setup programs such as the following:
+ **FBI** *(installs CIA formatted games and applications)*
+ **Luma3DS Updater** *(updates our CFW installation easily)*
+ **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)*
#### Det du trenger
* [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* [`fbi-2.4.2-injectable.zip`](magnet:?xt=urn:btih:f978b4cf5eda72823240b9c649f3fd2940a9f525&dn=fbi-2.4.2-injectable.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* The latest fork of [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *(the `.7z` file)*
* Siste utgave av [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(`.7z`-filen)*
* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
* Siste utgave av [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
* Siste utgave av [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest)
* Siste utgave av [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest)
* Siste utgave av [DspDump](https://github.com/Cruel/DspDump/releases/latest)
* Siste utgave av [FBI](https://github.com/Steveice10/FBI/releases/latest)
* Siste utgave av [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
#### Instruksjoner
##### Seksjon I - Forarbeid
{% capture notice-5 %}
**Ensure you are using an SD card that is not corrupted!**
**If you use a corrupted SD card without fixing it, you may BRICK!**
**Hvis du tror SD-kortet kan være korrupt, kan du sjekke etter feil med, [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), eller [F3X (Mac)](f3x-(mac))!**
{% endcapture %}
<div class="notice--danger">{{ notice-5 | markdownify }}</div>
1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system**
2. Opprett en mappe kalt `cias` på roten av SD-kortet hvis den ikke allerede er der
3. **Slett `a9lh` mappen fra roten av SD-kortet hvis den eksisterer**
+ **If you accidentally install arm9loaderhax using another device's `otp.bin`, you will BRICK!**
4. Slett `3ds` mappen fra roten av SD-kortet
5. **Kopier _innholdet av_ `starter` mappen i `starter.zip` til roten av SD-kortet**
+ Dette gjelder også den nye `3ds` mappen som erstatter den du nettop slettet
6. Kopier _innholdet av_ SafeA9LHInstaller `.7z` til roten av SD-kortet
7. **Kopier `a9lh` mappen fra data_input `.zip` til roten av SD-kortet**
8. **Kopier _innholdet av_ arm9loaderhax `.7z` til `a9lh` mappen på SD-kortet**
9. Kopier `hblauncher_loader.cia` fra hblauncher_loader `.zip` til `/cias/` mappen på SD-kortet
10. Kopier `lumaupdater.cia` fra Luma3DS Updater `.zip` til `/cias/` mappen på SD-kortet
11. Kopier `FBI.cia` fra FBI `.zip` til `/cias/` mappen på SD-kortet
12. **Kopier `arm9loaderhax.bin` fra Luma3DS `.7z` til roten av SD-kortet, og erstatt eksisterende filer**
13. Opprett en mappe med navn `luma` på roten av SD-kortet
14. Opprett en mappe med navnet `payloads` i `luma` mappen på SD-kortet
15. Kopier `Hourglass9.bin` fra Hourglass9 `.zip` til `/luma/payloads/` mappen på SD-kortet og endre navnet fra `Hourglass9.bin` til `start_Hourglass9.bin`
16. Kopier `GodMode9.bin` fra GodMode9 `.zip` til `/luma/payloads/` mappen på SD-kortet og endre navnet fra `GodMode9.bin` til`up_GodMode9.bin`
17. Kopier `aeskeydb.bin` til `/files9/` mappen på SD-kortet
18. Kopier `DspDump.3dsx` til `/3ds/` mappen på SD-kortet
19. Kopier _innholdet av_ `fbi-2.4.2-injectable.zip` til `/files9/` mappen på SD-kortet
##### Seksjon I - Installere arm9loaderhax
1. Sett inn SD-kortet i konsollen
2. Do the steps for installing arm9loaderhax on your device:
+ Konsollen skal være på 2.1.0
+ Go to `http://2xrsa.3ds.guide` on your 3DS
+ If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer
+ If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser)
+ If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen)
+ Hvis wifi er slått av, koble fra laderen og fjern batteriet i noen sekunder for å aktivere wifi
+ Press (Select) to Full Install
+ The installer will now install arm9loaderhax on your device (this is very fast)
+ Shut down your console by pressing any button
+ Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS
##### Section III - Configuring Luma3DS
1. Hold (Select) on boot to enter the Luma3DS menu
+ Make sure to start holding the button before pressing power
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh)
+ If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh)
2. Bruk (A)-knappen og piltastene for å aktivere følgende:
+ **"Autoboot SysNAND"**
+ **"Use SysNAND FIRM if booting with R"**
+ **"Show NAND or user string in System Settings"**
3. If you are using a **New 3DS**, you should *also* enable the following:
+ **"New 3DS CPU" til "Clock+L2(x)"**
+ This will increase the framerate of many games, but may cause instability in others
+ If some games do not work properly, disable this option and try again
4. Press (Start) to save and reboot
+ If you get a black screen, just continue to the next section
+ If you get a "Failed to mount CTRNAND" error, just continue to the next section
##### Section IV - Restoring the System
If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section.
{: .notice--info}
1. Åpne Hourglass9 fra arm9loaderhax ved å holde (Start) under oppstart
2. Gå til "SysNAND Backup/Restore"
3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin`
4. Press (Start) to reboot
+ If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
5. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) og endre navnet til `firmware.bin`
+ Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
+ Kopier `firmware.bin` og `cetk` til `/luma/` mappen på SD-kortet
+ Delete both of these files after updating your 3DS
2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+ Updates while using A9LH + Luma (what you have) are safe, stop asking about it
+ The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
+ If this gives you an error, set your DNS settings to "auto"
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
##### Section V - Injecting FBI
1. Åpne Hourglass9 fra arm9loaderhax ved å holde (Start) under oppstart
2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
3. Press (B), then select the "Health&Safety Inject" option
4. Select the FBI injectable `.app` for your region
5. Press (A) and confirm to inject
6. Press (Start) to reboot
7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi)
##### Section VI - Finalizing setup
1. Open Health and Safety (which is now FBI)
2. Velg "SD"
3. Velg "cias"
4. Navigate to `FBI.cia` and press (A) to install
5. Navigate to `hblauncher_loader.cia` and press (A) to install
6. Navigate to `lumaupdater.cia` and press (A) to install
7. Return to the SD directory with (B)
8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
9. Return to the FBI main menu with (B)
10. Velg "CTR NAND"
11. Velg "\<current directory>"
12. Select the "Paste" option, then press (A) to confirm
13. Exit with the home button
14. Launch the Homebrew Launcher from the home menu
15. Velg "DSP Dump"
16. Press (Start) when prompted to exit
17. Reboot while holding (Start) to launch Hourglass9
18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
20. Press (Select) on the main menu to eject your SD card
21. Press (Start) to reboot with the SD card removed
+ Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation
22. Bruk (A)-knappen og piltastene for å aktivere følgende:
+ **"Show NAND or user string in System Settings"**
23. If you are using a **New 3DS**, you should *also* enable the following:
+ **"New 3DS CPU" til "Clock+L2(x)"**
+ This will increase the framerate of many games, but may cause instability in others
+ If some games do not work properly, disable this option and try again
24. Reinsert your SD card, then press (Start) to save and reboot!
___
If DSi / DS functionality has broken (such as DS carts or DSiWare no longer working), [follow this troubleshooting guide](troubleshooting#twl_broken)
{: .notice--warning}
{% capture notice-10 %}
You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use whatever version you placed in CTR NAND.
{% endcapture %}
<div class="notice--info">{{ notice-10 | markdownify }}</div>
{% capture notice-6 %}
You will now boot a Custom Firmware based SysNAND by default.
You can now hold (Select) on boot to launch the Luma3DS configuration menu.
You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool.
{% endcapture %}
<div class="notice--info">{{ notice-6 | markdownify }}</div>
Du kan oppdatere arm9loaderhaxinstallasjonen i fremtiden ved å følge instruksjonene på [oppdatering av A9LH](updating-a9lh) siden.
{: .notice--info}
To use [NTR CFW](https://github.com/44670/BootNTR/), get `ntr.bin` from the appropriate `.zip` on [this](https://github.com/44670/BootNTR/releases) page and copy it to the root of your SD card, then install `BootNTR.cia` from [this](https://github.com/astronautlevel2/BootNTR/releases/latest) page.
{: .notice--info}
Keep your `NANDmin.bin` file, it can be restored by Hourglass9 to save you from a brick in the future.
{: .notice--info}
You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
{: .notice--info}
{% capture notice-7 %}
**You can remove any extra files and folders from the root of the SD card that are *not* in the following list:**
+ 3ds
+ files9
+ hblauncherloader
+ luma
+ Nintendo 3DS
+ arm9loaderhax.bin
+ boot.3dsx
{% endcapture %}
<div class="notice--info">{{ notice-7 | markdownify }}</div>
For information on changing your device to another region, check out the [Region Changing](region-changing) page.
{: .notice--success}
For information on keeping your A9LH installation up to date, check out the [Updating A9LH](updating-a9lh) page.
{: .notice--success}
For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
{: .notice--success}
Reference in a new issue View git blame Copy permalink