Guide_3DS/_pages/ko_KR/installing-boot9strap-(usm).txt

---
title: "Installing boot9strap (USM)"
---

{% include toc title="목차" %}

### Required Reading

In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.

We can do this using an existing exploit, BannerBomb3.

To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to inject the exploited WiFi profile to your connections list.

Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.

이 설명서는 미주, 유럽, 일본, 그리고 한국 지역 기기들 (시스템 버전 다음 글짜가 U, E, J, 아니면 K 인 경우) 와 호환됩니다.

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}

### 준비물

* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)

#### 섹션 I - 준비 작업

1. If your device is powered on, power off your device
1. Open [unSAFE_MODE-bb3 tool](https://3ds.nhnarwhal.com/3dstools/unsafemode.php) on your computer
1. "Choose File"를 선택하여 `movable.sed`를 업로드 해 주세요
1. Click "Download unSAFE_MODE-bb3 archive"
  + This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip archive (`unSAFE_MODE-bb3.zip`)
1. SD 카드를 컴퓨터에 삽입해 주세요
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
  + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
1. Copy `usm.bin` from `unSAFE_MODE-bb3.zip` to the root of your SD card
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
  + The `<ID0>` will be the same one that you used in [Seedminer](seedminer)
  + The `<ID1>` is a 32 character long folder inside of the `<ID0>`
  + If `Nintendo DSiWare` does not exist, create it inside of the `<ID1>`
1. 만약 다른 DSiWare 백업 파일 (`<8자리-id>.bin`)이 존재 한다면, PC로 옮겨 주세요
  + 이러하여 비어 있는 `Nintendo DSiWare` 폴더가 있을 겁니다. Moving the files to your PC ensures you don't delete any intentional backups
1. Copy the `F00D43D5.bin` file from `unSAFE_MODE-bb3.zip` to the `Nintendo DSiWare` folder

#### Section II - BannerBomb3

1. SD 카드를 기기에 다시 삽입해 주세요.
1. 기기를 시작해 주세요.
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
1. SD 카드 섹션을 열어 주세요
  + Your bottom screen should flash Red and then the system will reboot to home menu a few seconds later. This means the exploit profile was successfully copied
  + If the bottom screen does not flash Red, the exploit profile was not copied and you will not be able to complete the next section. Ensure that your files are properly placed, then try again
1. 기기를 종료해 주세요

#### Section III - unSAFE_MODE

1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
  + Keep holding the buttons until the device boots into Safe Mode
1. Press "OK" to accept the update
  + There is no update. This is part of the exploit
1. Press "I accept" to accept the terms and conditions
1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
  + This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration

#### Section IV - Configuring Luma3DS

1. Your device should have rebooted into the Luma3DS configuration menu
  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
  + **"Show NAND or user string in System Settings"**
1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요

At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
  + Luma3DS does not look any different from the normal HOME menu. If your console has booted into the HOME menu, it is running custom firmware.
  + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.

#### Section V - Restoring WiFi Configuration Profiles

1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
1. SD 카드 섹션을 열어 주세요
  + Your bottom screen should flash Green and then the system will reboot to home menu a few seconds later. This means your WiFi configuration profiles were successfully restored
1. 기기를 종료해 주세요
1. SD 카드를 컴퓨터에 삽입해 주세요
1. Navigate to `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` on your SD card
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder

___

### [마무리 단계] (finalizing-setup) 로 계속합니다
{: .notice--primary}