Guide_3DS/_pages/tr_TR/installing-boot9strap-(safeb9sinstaller).txt

---
title: "Installing boot9strap (SafeB9SInstaller)"
---

{% include toc title = "İçindekiler"%}

### Instructions

#### Section I - Launching SafeB9SInstaller

1. Launch udsploit from the list of homebrew
1. Once you see `patching kernel... done`, press (Start) to exit udsploit
  + This may take several tries
  + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
1. Launch safehax from the list of homebrew
  + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
  + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
  + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin
1. If the exploit was successful, you will have booted into SafeB9SInstaller

#### Bölüm II - boot9strap kurulumu

1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it is complete, press (A) to reboot your device

#### Bölüm III - Luma3DS'in yapılandırılması

1. Your device should have rebooted into the Luma3DS configuration menu
  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#boot-related-issues-on-modded-devices)
1. Use the (A) button and the D-Pad to turn on the following:
  + **"Show NAND or user string in System Settings"**
1. Kaydedip yeniden başlatmak için (Start) basın
  + If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default as long as the SD card is inserted.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.

___

### [Kurulumu Tamamlamak](finalizing-setup) için devam edin
{: .notice--primary}