57 lines
No EOL
3.1 KiB
Text
57 lines
No EOL
3.1 KiB
Text
---
|
|
title: "Installing boot9strap (2xrsa)"
|
|
---
|
|
|
|
#### Was du brauchst
|
|
|
|
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
|
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
|
|
* Das Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
|
|
|
|
#### Anleitung
|
|
|
|
##### Abschnitt I - Vorbereitung
|
|
|
|
1. Schalte deinen 3DS aus
|
|
1. Stecke deine SD-Karte in deinen Computer
|
|
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
|
1. Kopiere _die Inhalte_ des `starter` Ordners in `starter.zip` auf das Stammverzeichnis von deiner SD-Karte
|
|
1. Create a folder named `boot9strap` on the root of your SD card
|
|
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
|
1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
|
|
1. Stecke deine SD-Karte nun wieder in deinen 3DS
|
|
1. Schalte deine Konsole an
|
|
|
|
##### Section II - Launching SafeB9SInstaller
|
|
|
|
1. Launch the browser and go to the following URL on your device
|
|
+ `http://2xrsa.3ds.guide`
|
|
+ If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
|
|
+ Wenn du die Fehlermeldung "This service is not available in your region" bekommst, benutze die Systemeinstellungen, um die Region deines Gerätes zu der Region deines NANDs zu ändern, den du mit dem 2.1.0 ctrtransfer installiert hast
|
|
+ Solltest vergessen haben, die Kindersicherung vor CTRTransfering zu deaktivieren oder anderweitig nicht auf drahtlose Einstellungen zugreifen zu können, beachte, dass sich dein Gerät mit einem beliebigen Netzwerk mit dem Namen "attwifi" ohne Passwort verbindet
|
|
+ Wenn du weitere Fehler bekommst, [folge dieser Anleitung zur Fehlerbehebung](troubleshooting#ts_browser)
|
|
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
|
|
|
##### Section III - Installing boot9strap
|
|
|
|
1. Wait for all safety checks to complete
|
|
1. When prompted, input the key combo given to install boot9strap
|
|
1. Once it has completed, press (A) to reboot your device
|
|
|
|
##### Section IV - Configuring Luma3DS
|
|
|
|
1. Your device should have rebooted into the Luma3DS configuration menu
|
|
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
|
|
1. Use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. Drücke (Start) zum Speichern und neustarten
|
|
+ If you get an error, just continue the next page
|
|
|
|
___
|
|
|
|
Note that *New 3DS* users who ended up on 2.1.0 after a CTRTransfer *must* [restore their NAND backup](godmode9-usage#nand_restore) between "Section II - Configuring Luma3DS" and "Section III - Updating the System" of [Finalizing Setup](finalizing-setup).
|
|
{: .notice--danger}
|
|
|
|
Gehe weiter zu [Setup fertigstellen](finalizing-setup)
|
|
{: .notice--primary} |