Guide_3DS/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt

---
title: "Installing boot9strap (HBL-USM)"
---

{% include toc title="條目內容" %}

### 必讀事項

為了破解系統的 SAFE_MODE 韌體，我們需先注入一個已被破解的 WiFi 設定檔至主機中。

As we already have Homebrew access, we can use slotTool to do this.

一旦 WiFi 設定檔被注入，我們將會使用到 SAFE_MODE 來繼續此教學。 SAVE_MODE 是一個所有的 3DS 主機都存在的修復功能，我們之後將用它來啟動已修改後的 WiFi 設定檔。

If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--danger}

### 必備項目

* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
  * You may already have this from a prior section of the guide

#### 第一節 — 準備工作

1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
1. Launch slotTool from the list of homebrew
  + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
  + You will see some on-screen text and then your system will shut down
1. Remove your SD card from your console and connect it to your computer
1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap`
1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中
1. 將 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.bin` 複製到 SD 卡的根目錄
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
1. Put your SD card back into your console

#### Section II - unSAFE_MODE

1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
  + 持續按住按鈕直到主機重啟至安全模式中
  + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
1. 按下『OK』以允許更新
  + 此步驟將不會進行任何更新， 這只是觸發漏洞的一部分。
1. 按下「I accept(我同意/同意します)」鍵以接受聲明條款
1. The update will eventually fail, with the error code `003-1099`. 這也是觸發漏洞的一部分
1. 當系統提示您『你想要配置網路設置嗎? (Would you like to configure Internet settings?)』時，點選『Yes』
1. 在接下來出現的選單中，移動至 `連接點 1(Connection 1)` -> `更改設定(Change Settings)` -> `下一頁 (右箭頭)` -> `代理設置(Proxy Settings)` -> `詳細設置(Detailed Setup)`
  + 如[本圖中所示](https://uwuu.ca/images/safemode_highlighted.png)
1. 如果一切成功的話，您將自動進入 SafeB9SInstaller

#### 第三節 — 安裝 boot9strap

1. 出現提示時，輸入上方螢幕所顯示的按鍵組合以安裝 boot9strap
  + If the top screen is blank, power off your device and re-do Section III
1. 過程結束後，按下『A』重啟主機
1. 您的主機將會重啟至 Luma3DS 設定選單中
  + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. 按『Start』鍵以存檔並重新啟動系統

At this point, your console will boot to Luma3DS by default.
  + Luma3DS 不會特別在 HOME 主選單中新增任何特別的東西。 如果你的主機已經啟動到了 HOME 主選單，這代表自製韌體已經在運行了。
  + On the next page, you will install useful homebrew applications to complete your setup.

#### Section IV - Restoring WiFi Configuration Profiles

1. 啟動『下載通信 (Download Play)』程式
1. 等到你看到兩個按鍵
  + Do not press either of the buttons
1. 同時按下『L』+『下』+『Select』鍵以啟動 Rosalina 選單
1. 選擇『Miscellaneous options』
1. 選擇『Switch the hb. title to the current app.』
1. 按『B』繼續
1. 按『B』回到 Rosalina 主選單
1. 按『B』退出 Rosalina 選單
1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式
1. Relaunch the Download Play application
1. 您的主機應該就會啟動 Homebrew Launcher 了
1. Launch slotTool from the list of homebrew
1. Select "RESTORE original wifi slots 1,2,3"
1. Your device will then reboot

___

### 繼續至[完成安裝](finalizing-setup)
{: .notice--primary}