Guide_3DS/_pages/ru_RU/finalizing-setup.txt

---
title: "Завершение установки"
---

{% include toc title="Содержание" %}

### Обязательно к прочтению

The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND. In this case, we are using Luma3DS by [LumaTeam](https://github.com/LumaTeam/) to patch the device, allowing it to run homebrew software.

On this page, we will make critical system file backups and install the following homebrew programs:

+  **FBI** *(installs CIA formatted applications)*
+  **Anemone3DS** *(установка пользовательских тем)*
+  **Checkpoint** *(создание и восстановление резервных копий сохранений 3DS и DS игр)*
+  **Universal-Updater** *(a homebrew app store for downloading homebrew from the 3DS over Wi-Fi)*
+  **GodMode9** *(многофункциональная утилита для работы с NAND и картриджами)*
+  **Homebrew Launcher Loader** *(запуск Homebrew Launcher)*

It is not recommended to skip downloading any of these applications, as many of them will be used later on this page. At the end of this page, your SD card will be cleaned up by removing unnecessary installation files.
{: .notice--warning}

### Compatibility Notes

If your **New 3DS** was on version 2.1.0 before following this guide, you should [restore your NAND backup](godmode9-usage#restoring-a-nand-backup) before continuing. This likely doesn't apply to you unless you were following this guide in 2017.
{: .notice--warning}

If your previous CFW setup was EmuNAND-based and you wish to move the contents of your EmuNAND/RedNAND to SysNAND, follow [Move EmuNAND](move-emunand) before following this page. If you don't know what an EmuNAND is, this doesn't apply to you.
{: .notice--info}

### Что понадобится

* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) (the `.cia` file)
* The v3.7.4 release of [Checkpoint](https://github.com/BernardoGiordano/Checkpoint/releases/tag/v3.7.4) (the `.cia` file)
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (the `.cia` file)
* The latest release of [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (the `.cia` file)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (**both** the `.cia` and `.3dsx` files)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (the GodMode9 `.zip` file)

### Инструкция

#### Часть I - Подготовительные работы

In this section, you will copy the files necessary to follow the rest of the instructions on this page.

1. Выключите консоль
1. Вставьте SD-карту в компьютер
1. Создайте папку `cias` в корне SD-карты, если таковой нет
1. Copy all of the CIA files (`Anemone3DS.cia`, `Checkpoint.cia`, `FBI.cia`, `Homebrew_Launcher.cia`, and `Universal-Updater.cia`) to the `/cias/` folder on your SD card
1. Создайте папку `3ds` в корне SD-карты, если таковой нет
    + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the device automatically generates
1. Скопируйте `FBI.3dsx` в папку `/3ds/` на SD-карте
1. Создайте папку `payloads` внутри папки `luma` на SD-карте, если таковой нет
1. Скопируйте `GodMode9.firm` из `.zip-архива` GodMode9 в папку `/luma/payloads/` на SD-карте
1. Скопируйте папку `gm9` из `.zip-архива` GodMode9 в корень SD-карты
1. Вставьте SD-карту обратно в консоль
1. Включите консоль

The screenshots below indicate the minimum SD card layout that is required to follow this page. You may have extra files or folders on your SD card, depending on your previous setup or the method that you followed.

![]({{ "/images/screenshots/finalizing-root-layout.png" | absolute_url }})
{: .notice--info}

![]({{ "/images/screenshots/godmode9-location.png" | absolute_url }})
{: .notice--info}



#### Часть II - Обновление системы

In this section, you will update your system to the latest version, which is safe to do with custom firmware.

{% include_relative include/sysupdate.txt cfw="true" %}

#### Часть III - Homebrew Launcher

In this section, you will temporarily replace Download Play with Homebrew Launcher (which we need to launch FBI). Download Play will automatically go back to normal once you reboot your device.

{% include_relative include/launch-hbl-dlp.txt %}

#### Section IV - RTC and DSP Setup

In this section, you will sync your 3DS internal clock with the actual time and dump the sound firmware (which is necesssary for some homebrew software to use sound properly).

1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina
1. Выберите "Miscellaneous options"
1. Select "Dump DSP firmware"
1. Нажмите (B), чтобы продолжить
1. Select "Nullify user time offset"
1. Нажмите (B), чтобы продолжить
1. Нажмите (B) для возврата в главное меню Rosalina
1. Нажмите (B) для выхода из главного меню Rosalina

#### Section V - Installing CIAs

In this section, you will install several useful homebrew applications to HOME Menu.

1. Выберите FBI в списке homebrew
1. Перейдите в `SD` -> `cias`
1. Выберите "\<current directory>"
1. Выберите "Install and delete all CIAs", нажмите (A) для подтверждения
1. Нажмите (Home), затем закройте приложение Загружаемая игра

#### Часть VI - CTRNAND Luma3DS

In this section, you will use a script to copy some of Luma3DS's files to internal memory so that they can be accessed, even without an SD card inserted.

1. Выключите консоль
1. Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
  + If you do not boot into GodMode9, ensure that `GodMode9.firm` is in `/luma/payloads/` and that `payloads` is correctly spelled
1. Если вам предложат создать бэкап важных файлов, нажмите кнопку (A) чтобы сделать это, затем нажмите (A) чтобы продолжить после завершения
1. Если вам предложат выставить RTC дату и время, нажмите кнопку (A) чтобы сделать это, настройте дату и время, затем нажмите (A) чтобы продолжить
1. Нажмите кнопку (Home) для вызова меню
1. Выберите "Scripts..."
1. Выберите "GM9Megascript"
1. Выберите "Scripts from Plailect's Guide"
1. Выберите "Setup Luma3DS to CTRNAND"
1. При появлении запроса, нажмите (A) для продолжения
1. Нажмите (A), чтобы разрешить запись в SysNAND (lvl1) и введите указанную комбинацию кнопок
1. Нажмите (A), чтобы продолжить

#### Часть VII - Очистка SD-карты

In this section, you will use a script to remove some unnecessary files from your SD card.

1. Выберите "Cleanup SD Card"
1. При появлении запроса, нажмите (A) для продолжения
1. Нажмите (A), чтобы продолжить
1. Нажмите (B) для возврата в главное меню

#### Часть VIII - Бэкап важных файлов

In this section, you will make backups of files that can be used to recover from software bricks or to recover data.

1. Выберите "Backup Options"
1. Выберите "SysNAND Backup"
1. Нажмите (A) для подтверждения
  + Этот процесс займет некоторое время
  + If you get an error, look for your issue in the [troubleshooting guide](troubleshooting#finalizing-setup)
1. Нажмите (A), чтобы продолжить
1. Нажмите (B) для возврата в главное меню
1. Выберите "Exit"
1. Нажмите (A) чтобы восстановить запрет на запись, если появится запрос
1. Navigate to `[S:] SYSNAND VIRTUAL`
1. Press (A) on `essential.exefs` to select it
1. Выберите "Copy to 0:/gm9/out"
  + If you see "Destination already exists", press (A) on "Overwrite file(s)"
1. Нажмите (A), чтобы продолжить
1. Нажмите кнопку (Home) для вызова меню
1. Выберите "Poweroff system" чтобы выключить консоль
1. Вставьте SD-карту в компьютер
1. Copy `<date>_<serialnumber>_sysnand_##.bin`, `<date>_<serialnumber>_sysnand_##.bin.sha`, and `essential.exefs` from the `/gm9/out/` folder on your SD card to a safe location on your computer
  + Copy these backups to multiple locations (such as online file storage, an external hard drive, etc.)
  + Эти бэкапы позволят восстановить консоль и/или извлечь файлы из образа NAND, если что-то пойдёт не так
1. Delete `<date>_<serialnumber>_sysnand_##.bin` and `<date>_<serialnumber>_sysnand_##.bin.sha` from the `/gm9/out/` folder on your SD card after copying it
  + The other backup files are negligible in size and may be kept on your SD card for ease of access
1. If you have it, copy the `/luma/backups/` folder on your SD card to a safe location on your computer
1. Вставьте SD-карту обратно в консоль
1. Включите консоль

___

You're done! Custom firmware is now fully configured on your device.
{: .notice--success}

Hello! We're looking for feedback on the overall experience of following our guide. If you'd like to help out, check out the survey [here](https://forms.gle/vZNoc4QLCz5MEXCK7) (only available in English). Thanks!
{: .notice--info}

### Information and Notes

{% capture notice-6 %}
Here are some key combos that you should know:

- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}

<div class="notice--info">{{ notice-6 | markdownify }}</div>

See [here](https://3ds.eiphax.tech/tips.html) for some suggestions on things to do with custom firmware.
{: .notice--info}

For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) and [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges) pages.
{: .notice--info}