Guide_3DS/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt

---
title: "Installation de boot9strap (kartdlphax)"
---

{% include toc title="Table des matières" %}

### Lecture requise

kartdlphax est un exploit pour le mode Téléchargement de Mario Kart 7. It can be used with unSAFE_MODE to install custom firmware on target devices.

Pour suivre ces instructions, vous aurez besoin de ceci :

- Une seconde 3DS avec un firmware custom (la **3DS source**) qui est la même région que la 3DS que vous essayez de modifier (la **3DS cible**)
- Une copie physique ou numérique de Mario Kart 7 qui est de la même région que les deux consoles
- Une carte SD pour les deux consoles

If the (Right/Left Shoulder), (D-Pad Up), or (A) buttons on the **target 3DS** do not work, you will not be able to follow these instructions. For further assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
{: .notice--warning}
	
## Ce dont vous avez besoin

Sur la **3DS source** (la 3DS avec un firmware custom) :

* The latest release of [kartdlphax](https://github.com/mariohackandglitch/kartdlphax/releases/latest) (`plugin.3gx`)
* The latest release of [Luma3DS 3GX Loader Edition](https://github.com/Nanquitas/Luma3DS/releases/latest) (`boot.firm`)

Sur la **3DS cible** (la 3DS que vous essayez de modifier):

* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
* The latest release of [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest) (the RELEASE `.zip` file)

#### Section I - Prep Work (source 3DS)

1. Insert the SD card of your **source 3DS** in your computer
1. Copy Luma 3GX Loader Edition's `boot.firm` to the root of the **source 3DS**'s SD card, replacing any existing file
  + La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
1. Copy kartdlphax's `plugin.3gx` to the following directory on the **source 3DS**'s SD card, depending on the **region of your copy of Mario Kart 7**:
  - USA: `luma/plugins/0004000000030800`
  - EUR: `luma/plugins/0004000000030700`
  - JPN: `luma/plugins/0004000000030600`
  - Create the `plugins` and `00040000...` folders if they do not already exist
1. Eject the SD card and put it in the **source 3DS**

#### Section II - Prep Work (target 3DS)

1. Insert the SD card of your **target 3DS** in your computer
1. Copy `boot.firm` and `boot.3dsx` from the standard Luma3DS `.zip` to the root of your SD card
1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD
1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
1. Create a folder called `3ds` on the root of your SD card
1. Copy the `slotTool` folder from the unSAFE_MODE `.zip` to the `3ds` folder on your SD card
1. Eject the SD card and put it in the **target 3DS**

#### Section III - kartdlphax

1. Power on the **source 3DS**
  - If you are prompted to set up Luma3DS, just press START to save the configuration
1. Once in the HOME Menu, press (Left Shoulder) + (Down D-Pad) + (Select) to bring up the Rosalina menu
1. Select "Enable plugin loader"
1. Appuyez sur (B) pour quitter le menu Rosalina
1. Launch Mario Kart 7
  - Ensure that wireless connectivity is enabled
1. Navigate to `Local Multiplayer`. A menu should pop up
  - If the screen freezes, hold the power button for fifteen seconds to force power off your device, then try again
  - If you have launched kartdlphax previously, the last selected settings will be loaded. If they are correct, select `Use settings` and skip the next 3 steps. If they are incorrect, select `Change settings` and proceed.
1. Select your **target 3DS** device type (Old 3DS family or New 3DS family)
1. Select the exploit type `3DS ROP xPloit Injector`
1. A confirmation menu will show up. If the settings shown on the top screen are correct, select `Use settings`
  - If the settings are not correct, press `Change settings` and modify them accordingly
1. Select `Create Group`
  - If the source 3DS freezes at this point and you are using a cartridge, try [installing the cartridge to the system](dumping-titles-and-game-cartridges#installing-a-game-cartridge-directly-to-the-system)
1. Power on the **target 3DS**
  - Ensure that wireless connectivity is enabled
1. On the **target 3DS**, open the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}), then select "Nintendo 3DS"
1. Join the group created by the **source 3DS**
1. Select "Start" on the **source 3DS** once it has detected the **target 3DS**
1. Once multiplayer has loaded, navigate to `Grand Prix` -> `50cc` -> (any driver) -> `Mushroom Cup` -> `OK`
1. Wait a while (a percentage should be displayed on the **source 3DS**)
1. If the exploit was successful, the **target 3DS** will have booted into the 3DS ROP xPloit Injector
  - If the exploit was not successful, power off the **source 3DS** and **target 3DS** and start again from the beginning of `Section III - kartdlphax`
1. Press (X) to inject unSAFE_MODE
1. If the injection was successful, the screen will turn green and the **target 3DS** will automatically power off
  + If the screen turns red, power off the target 3DS and start again from the beginning of `Section III - kartdlphax`. If this doesn't work, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp))

You will **not** need to use your **source 3DS** to complete any further steps on this guide. Any further steps should only be completed on the **target 3DS**.
{: .notice--info}

#### Section IV - unSAFE_MODE

1. With your device still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your device
  + Maintenez les boutons enfoncés jusqu'à ce que la console démarre en mode sans échec
  + If you're unable to get into Safe Mode after multiple attempts, one of your buttons may be failing or broken. If this is the case, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
1. Appuyez sur "OK" pour accepter la mise à jour
  + Aucune mise à jour nécessaire. Ceci fait partie de l'exploit
1. Appuyez sur « J'accepte » pour accepter les termes et conditions
1. The update will eventually fail, with the error code `003-1099`. Ne vous inquiétez pas, c'est normal
1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer"
1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés`
  + This is a [visual representation](/images/safemode_highlighted.png)
1. Si l'exploit a réussi, votre console devrait avoir démarré sur SafeB9SInstaller

#### Section V - Installing boot9strap

1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
  + If the top screen is blank, power off your device and re-do Section IV
1. Once it is complete, press (A) to reboot your device
1. Votre console va redémarrer dans la configuration de Luma3DS
  + If your device shuts down when you try to power it on, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
1. Appuyez sur (Start) pour enregistrer les modifications et redémarrer

At this point, your console will boot to Luma3DS by default.
  + Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
  + On the next page, you will install useful homebrew applications to complete your setup.

#### Section VI - Restoring WiFi Configuration Profiles

1. Lancez l’application Mode téléchargement
1. Attendez jusqu'à ce que vous voyiez les deux boutons
  + Do not press either of the buttons
1. Appuyez simultanément sur (L) + (Bas sur la croix directionnelle) + (Select) pour ouvrir le menu Rosalina
1. Sélectionnez "Miscellaneous options"
1. Sélectionnez "Switch the hb. title to the current app."
1. Appuyez sur (B) pour continuer
1. Appuyez sur (B) pour revenir au menu principal de Rosalina
1. Appuyez sur (B) pour quitter le menu Rosalina
1. Appuyez sur (Home), puis fermez Mode téléchargement
1. Relaunch the Download Play application
1. Votre console devrait maintenant charger le Homebrew Launcher
1. Launch slotTool from the list of homebrew
1. Select "RESTORE original wifi slots 1,2,3"
1. Your device will then reboot

___

### Continuer vers [Finalisation de l'installation](finalizing-setup)
{: .notice--primary}