Guide_3DS/_pages/zh_CN/move-emunand.txt
2018-11-18 19:16:14 -05:00

159 lines
No EOL
6.6 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---
title: "Move EmuNAND"
---
本节是附加章节将你的EmuNAND的数据迁移到新的SysNAND自制系统中然后删除EmuNAND分区。 注意EmuNAND和RedNAND是[同一概念](http://3dbrew.org/wiki/NAND_Redirection)的两种略微不同的实现。
{: .notice--info}
Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only displayed if there is more than one payload detected. If there is only one payload detected, holding (Start) on boot will directly launch GodMode9.
{: .notice--info}
**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}
#### 你需要
* 已有的EmuNAND
* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* 最新版的 [FBI](https://github.com/Steveice10/FBI/releases/latest)
#### 操作指南
##### 第一部分 - 准备工作
1. Power off your device
1. Insert your SD card into your computer
1. Copy `GodMode9.firm` (or `GodMode9.bin` for arm9loaderhax users) from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Reinsert your SD card into your device
##### Section II - Backup SysNAND DSiWare Saves
If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}
1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9out"
+ This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu
##### Section III - Backup GBA VC Saves
If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}
Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}
1. Hold (R) and press (Start) at the same time to power off your device
1. Insert your SD card into your computer
1. Create a folder named `files9` on the root of your SD card if it does not already exist
1. Create a folder in `/files9/` for each GBA VC game that you want to backup the save for
1. Reinsert your SD card into your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
+ Launch the GBA VC game on SysNAND
+ Exit the GBA VC game
+ Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+ Launch GodMode9 by pressing (A)
+ Navigate to `[S:] SYSNAND VIRTUAL`
+ Press (Y) on `gbavc.sav` to copy it
+ Press (B) to return to the main menu
+ Navigate to `[0:] SDCARD` -> `files9`
+ Navigate to the folder you created for this GBA VC game
+ Press (Y) to paste `gbavc.sav`
+ Press (Start) to reboot your device
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
##### Section IV - Copy EmuNAND to SysNAND
1. Navigate to `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+ This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
+ This process will take some time
1. Once it has completed, press (A) to continue
1. Press (B) to return to the main menu
##### Section V - Restore DSiWare Saves
If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}
1. Navigate to `[0:] SDCARD` -> `gm9out`
1. Press (Y) on the `00030004` folder to copy it
1. Press (B) twice to return to the main menu
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Select "Overwrite file(s)"
+ This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu
##### Section VI - Restore GBA VC Saves
If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}
1. Hold (R) and press (Start) at the same time to power off your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
+ Launch the GBA VC game on SysNAND
+ Exit the GBA VC game
+ Boot your device while holding (Start) to launch the Luma3DS chainloader menu
+ Launch GodMode9 by pressing (A)
+ Navigate to `[0:] SDCARD` -> `files9`
+ Navigate to the folder you created for this GBA VC game
+ Press (Y) on `gbavc.sav` to copy it
+ Press (B) to return to the main menu
+ Navigate to `[S:] SYSNAND VIRTUAL`
+ Press (Y) to paste `gbavc.sav`
+ Press (A) to confirm
+ Press (Start) to reboot your device
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
##### Section VII - Backup SysNAND
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Backup NAND"
1. Press (A) to continue
1. 格式化完成后,同时按(R)键和(B)键弹出你的SD卡
1. 将你的 SD 卡插入到您的计算机
1. Copy `nand.bin` from the `/gm9out/` folder on your SD card to a safe location on your computer
+ If you previously used SafeCTRTransfer and have a NAND backup named `<serialnumber>_nand.bin`, replace it with this one (rename `nand.bin` to match `<serialnumber>_nand.bin`)
+ Make backups in multiple locations (such as online file storage)
+ 备份文件可以在将来出现错误时将你的机器救砖
1. Delete `nand.bin` from the `/gm9out/` folder on your SD card after copying it
1. **备份你SD卡上的所有文件到你的计算机上。SD卡上的所有文件在接下来将被删除**
##### Section VIII - Format SD card
1. Reinsert your SD card into your device
1. Press (Home) to bring up the action menu
1. Select "More..."
1. 选择”SD format menu”
1. 按(A)键确定
1. 选择”No EmuNAND”
1. 选择”Auto”
1. Press (A) to accept the label `GM9SD`
+ Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. Hold (R) and press (B) at the same time to eject your SD card
1. 将你的 SD 卡插入到您的计算机
1. Copy all your files back to your SD card
+ Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Reinsert your SD card into your device
1. 按(A)键重新加载你的SD卡
1. Press (Start) to save and reboot
1. 如果出现黑屏,参见这个[问题排查](troubleshooting#ts_sys_down)
___
Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}