83 lines
No EOL
3.6 KiB
Text
83 lines
No EOL
3.6 KiB
Text
---
|
|
title: "Installing boot9strap (ntrboot)"
|
|
---
|
|
|
|
#### 준비물
|
|
|
|
* A magnet that triggers the sleep mode of your device (if using a folding style device)
|
|
* Your ntrboot flashed flashcart
|
|
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `devkit` file, not the `ntr` file)*
|
|
* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
|
|
* 홈브류 [스타터 킷](http://smealum.github.io/ninjhax2/starter.zip)
|
|
|
|
#### 진행 방법
|
|
|
|
##### 섹션 I - 준비 작업
|
|
|
|
1. 기기를 종료해 주세요.
|
|
1. SD 카드를 컴퓨터에 삽입해 주세요.
|
|
1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
|
|
1. Copy _the contents of_ `starter.zip` to the root of your SD card
|
|
1. Create a folder named `boot9strap` on the root of your SD card
|
|
1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
|
|
|
|
|
|
{: .notice--info}
|
|
|
|
1. SD 카드를 기기에 다시 삽입해 주세요.
|
|
1. 기기를 시작해 주세요.
|
|
|
|
##### Section II - ntrboot
|
|
|
|
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
|
|
+ This step is not needed on non-folding style devices (such as the old 2DS)
|
|
1. 기기를 종료해 주세요.
|
|
1. Insert your flashcart into your device
|
|
1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
|
|
+ It may take a few attempts to get this to work because the positioning is awkward
|
|
1. If the exploit was successful, you will have booted into SafeB9SInstaller
|
|
|
|
##### Section III - Installing boot9strap
|
|
|
|
1. Wait for all safety checks to complete
|
|
1. When prompted, input the key combo given to install boot9strap
|
|
1. Once it has completed, force your device to power off by holding down the power button
|
|
+ Your device will only boot to the SafeB9SInstaller screen until the next section is completed
|
|
|
|
##### Section IV - Configuring Luma3DS
|
|
|
|
1. SD 카드를 컴퓨터에 삽입해 주세요.
|
|
1. Delete `boot.firm` from the root of your SD card
|
|
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
|
|
1. SD 카드를 기기에 다시 삽입해 주세요.
|
|
1. 기기를 시작해 주세요.
|
|
1. Your device should have booted into the Luma3DS configuration menu
|
|
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
|
|
1. Use the (A) button and the D-Pad to turn on the following:
|
|
+ **"Show NAND or user string in System Settings"**
|
|
1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요.
|
|
+ If you get an error, just continue the next page
|
|
|
|
___
|
|
|
|
Continue to [Finalizing Setup](finalizing-setup)
|
|
{: .notice--primary}
|
|
|
|
___
|
|
|
|
##### Section V - Removing ntrboot
|
|
|
|
This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
|
|
{: .notice--info}
|
|
|
|
Do not follow this section until you have completed the rest of the instructions on this page.
|
|
{: .notice--warning}
|
|
|
|
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
|
|
1. Select "ntrboot_flasher"
|
|
1. Select "Restore Flash"
|
|
1. Press (Y) to proceed
|
|
1. 완료될 때까지 기다려 주세요.
|
|
1. (B)를 눌러 메인 메뉴로 돌아가 주세요.
|
|
1. Select "EXIT" to power off **the source 3DS** |