Guide_3DS/_pages/de_DE/installing-boot9strap-(fredtool-inject).txt

---
title: "Installing boot9strap (Fredtool-Inject)"
---

{% include toc title="Inhalt" %}

{% capture technical_info %}
<summary><em>Technische Details (optional)</em></summary>

This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application.

This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed [here](https://www.3dbrew.org/wiki/3DS_System_Flaws).

{% endcapture %}
<details>{{ technical_info | markdownify }}</details>
{: .notice--info}

You should only be able to get to this page if you are running version 11.17.0. If you are on any firmware other than 11.17.0 or 11.16.0, STOP as these instructions WILL LEAD TO A BRICK on other firmwares!!
{: .notice--warning}

### Was du brauchst

* Your `movable.sed` file from completing [Seedminer](seedminer-(alternate))
* Your DSiWare backup from completing [Dumping eShop DSiWare](dumping-eshop-dsiware)
* The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest) (`Frogminer_save.zip`)
* **11.16.0 or 11.17.0 users**: The v6.1.1 release of [b9sTool](https://github.com/zoogie/b9sTool/releases/download/v6.1.1/release_6.1.1.zip)
    * Make **absolutely sure** that you are one of these firmwares, as being on other firmwares may lead to a BRICK
* Die neueste Version von [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (die Luma3DS `.zip` Datei)

#### Abschnitt I - CFW Check

{% include_relative include/cfw-check-fredtool.txt %}

#### Abschnitt II - Vorbereitungen

In this section, you will copy the files necessary to temporarily replace DS Connection Settings with Flipnote Studio, which is used to launch the boot9strap (custom firmware) installer.

1. Stecke deine SD-Karte in deinen Computer
1. Öffne die [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) Webseite auf deinem Computer
1. Bei dem "Username" Feld, gib irgendeinen normalen Namen (keine Leerzeichen oder Sonderzeichen) an
1. Under the "DSiBin" field, upload your DSiWare backup file (e.g. 42383841.bin) from the root of your SD card using the first "Browse..." option
1. Wähle beim "MovableSed" Feld deine `movable.sed` Datei mit der "Browse..." Option aus
1. Under the "InjectionTarget" field, set the injection target to `DSinternet` (NOT memorypit)
1. Drücke auf "Build"
    + Warte ein paar Sekunden, bis der Erstellungsprozess abgeschlossen ist
1. Gib im Abschnitt Build-Verlauf links den Benutzernamen in das "suchen" Feld ein
1. Klicke das erste Suchergebnis
    + Dieses Ergebnis sollte das neuste sein
1. Drücke auf den "output_(name).zip" Link
1. Navigiere zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte
    + `<ID0>` is the 32-letter folder name that you copied in [Seedminer](seedminer)
    + `<ID1>` is a 32-letter folder inside of the `<ID0>`
1. Delete `F00D43D5.bin` from your Nintendo DSiWare folder
1. Copy the `42383841.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
    ![]({{ "/images/screenshots/bb3/dsiware-location-4.png" | absolute_url }}){: .notice--info}
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
    + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
1. Copy `boot.nds` (B9STool) from the release `.zip` to the root of your SD card
1. Kopiere den `private` Ordner von der Frogminer_save `.zip` in das Stammverzeichnis deiner SD-Karte
1. Reinsert your SD card into your console
1. Power on your console

    ![]({{ "/images/screenshots/fredtool/fredtool-root-layout.png" | absolute_url }})
    {: .notice--info}


#### Section III - Overwriting DS Connection Settings

In this section, you will copy the hacked DS Connection Settings DSiWare to internal memory, which will temporarily replace it with Flipnote Studio.

1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Select the "Haxxxxxxxxx!" title
    + If you are unable to select the "Haxxxxxxxxx" title, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
1. Select "Copy", then select "OK"

#### Section IV - Flipnote Exploit

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

Falls du eine visuelle Anleitung für diesen Abschnitt brauchst, findest du diese [hier] (https://zoogie.github.io/web/flipnote_directions/).
{: .notice--info}

1. Return to main menu of the System Settings
1. Navigate to `Internet Settings` -> `Nintendo DS Connections`, then select "OK" ([image](/images/screenshots/fredtool/dsconnection.png))
1. If the exploit was successful, your console will have loaded the JPN version of Flipnote Studio
    + If your console does not load the JPN version of Flipnote Studio, [follow this troubleshooting guide](troubleshooting#installing-boot9strap-fredtool-inject)
{% include_relative include/exploit-flipnote.txt %}

#### Section V - Installing boot9strap

{% include_relative include/install-boot9strap-b9stool.txt %}

#### Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your console
{% include_relative include/configure-luma3ds.txt %}

{% include_relative include/luma3ds-installed-note.txt %}

#### Section VII - Restoring DS Connection Settings

In this section, you will restore DS Connection Settings to the way it was before it was temporarily replaced with Flipnote Studio in an earlier section.

1. Navigiere zu `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` auf deiner SD-Karte
1. Copy the `42383841.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder, replacing the existing one
1. Reinsert your SD card into your console
1. Power on your console
1. Launch System Settings on your console
1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` ([image](/images/screenshots/bb3/dsiware-management.png))
1. Select the "Nintendo DSi™" title
1. Select "Copy", then select "OK"

___

### Fortfahren mit [Setup fertigstellen](finalizing-setup)
{: .notice--primary}