Guide_3DS/_pages/zh_TW/get-started.txt

---
title: "新手入門"
---

{% include toc title="條目內容" %}

Before starting this guide, we will see if custom firmware is already installed and check the current system version of your device.

#### 第一節 — 檢查自製韌體

1. 關閉您的主機
1. 按住「Select」鍵
1. 在開機時按住「Select」鍵
1. If you do not see an unusual menu (e.g. "Luma3DS Configuration"), you may proceed to the next section

If you see an unusual menu, STOP - you already have custom firmware! Continue from [here](checking-for-cfw#what-to-do-next).
{: .notice--warning}

#### 第二節 — 檢查系統版本

1. 開啟系統設定
1. Your system version will be displayed on the bottom right of the top screen (e.g. "Ver. 11.15.0-47U")

#### 第三節 — 選擇改機方式

Use the version table below to select a method. A few things to note:
  + The version table below is *inclusive*. 比方說，『從 11.4 到 11.14.0』，包括著11.4.0版、11.14.0版、以及任何中間的版本。
  + Software versions do not work the same as decimals. Versions 11.10.0 and above are newer than 11.3.0, and are therefore not compatible with Soundhax.
  + The number and letter after the system version are not important.
  + No matter the method you follow, the end result is the same (boot9strap+Luma3DS custom firmware setup on the latest firmware).

<table>
  <colgroup>
    <col span="1" style="width: 20%;">
    <col span="1" style="width: 40%;">
  </colgroup>
  <thead>
    <tr>
      <th style="text-align: center">系統版本</th>
      <th style="text-align: center">步驟</th>
    </tr>
  </thead>
  <tbody>
    <tr>
      <td style="text-align: center; font-weight: bold;">11.15.0 (最新版本)</td>
      <td style="text-align: center; font-weight: bold;"><a href="seedminer">Seedminer</a></td>
    </tr>
	  <tr>
      <td style="text-align: center; font-weight: bold;">11.4.0 至 11.14.0</td>
      <td style="text-align: center; font-weight: bold;">透過系統設定將您的 3DS 更新至最新版本</td>
    </tr>
    <tr>
      <td style="text-align: center; font-weight: bold;">1.0.0 to 11.3.0</td>
      <td style="text-align: center; font-weight: bold;"><a href="installing-boot9strap-(soundhax)">安裝boot9strap (透過 Soundhax)</a></td>
    </tr>
  </tbody>
</table>

---
#### 替代方式

可以的話，建議先試試以上的方式再來試以下方案。

Otherwise, methods that work on all versions are available, but require additional hardware:

1. [安裝 boot9strap (透過 kartdlphax)](installing-boot9strap-(kartdlphax)) - 需要一台已改機過的 3DS 以及馬力歐賽車 7 (Mario Kart 7)
1. [ntrboot](ntrboot) - 需備有相容的 DS 燒錄卡
1. [安裝 boot9strap (透過硬改)](installing-boot9strap-(hardmod)) - 需要焊接