2017-05-21 22:39:40 +02:00
---
2017-05-23 20:02:51 +02:00
title: "Installing boot9strap (Homebrew Launcher)"
2017-05-21 22:39:40 +02:00
---
2017-07-20 06:10:29 +02:00
Dacă v-ați modat deja 3DS-ul înainte și aveți o configurare cu CFW bazat pe EmuNAND, acest ghid acoperă exclusiv SysNAND-ul și ar trebui să urmați toate instrucțiunile din SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection).
2017-05-21 22:39:40 +02:00
{: .notice--info}
2017-05-23 21:00:46 +02:00
#### Instrucțiuni
2017-05-21 22:39:40 +02:00
2017-06-26 20:11:58 +02:00
##### Section I - Launching SafeB9SInstaller
2017-05-21 22:39:40 +02:00
1. Launch udsploit from the list of homebrew
+ You may have to scroll down to see this option
1. Once it has completed, press (Start) to exit udsploit
+ This may take several tries
+ Dacă se blochează, închideți consola forțat ținând apăsat butonul de Power și încercați din nou
1. Launch safehax from the list of homebrew
+ You may have to scroll down to see this option
2017-05-22 22:18:58 +02:00
+ If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
+ If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
2017-05-21 22:39:40 +02:00
+ Dacă se blochează, închideți consola forțat ținând apăsat butonul de Power și încercați din nou
1. If the exploit was successful, you will have booted into SafeB9SInstaller
2017-07-19 21:10:16 +02:00
##### Secțiunea II - Instalând boot9strap
2017-05-21 22:39:40 +02:00
1. Wait for all safety checks to complete
1. When prompted, input the key combo given to install boot9strap
1. Once it has completed, press (A) to reboot your device
2017-05-30 19:27:28 +02:00
2017-07-19 21:10:16 +02:00
##### Secțiunea III - Configurând Luma3DS
2017-05-30 19:27:28 +02:00
1. Your device should have rebooted into the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. Use the (A) button and the D-Pad to turn on the following:
+ **"Show NAND or user string in System Settings"**
2017-07-19 21:10:16 +02:00
1. Apăsați (Start) pentru a salva și reporni
2017-06-06 23:24:28 +02:00
+ If you get an error, just continue the next page
2017-05-21 22:39:40 +02:00
___
2017-07-19 21:10:16 +02:00
Continuați la [Finalizarea instalării](finalizing-setup)
2017-05-21 22:39:40 +02:00
{: .notice--primary}