Guide_Wii/_pages/no_NO/move-emunand.txt

---
title: "Move EmuNAND"
---

This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
{: .notice--info}

Merk at på noen versjoner av Luma3DS vil chainloader menyen kun vises hvis det er flere enn en payload oppdaget. If there is only one payload detected, holding (Start) on boot will directly launch GodMode9.
{: .notice--info}

**Du MÅ allerede ha installert Luma3DS og boot9strap eller arm9loaderhax for å bruke dette.**
{: .notice--danger}

#### Det du trenger

* En eksisterende EmuNAND
* Siste utgave av [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* Siste utgave av [FBI](https://github.com/Steveice10/FBI/releases/latest)

#### Instruksjoner

##### Seksjon I - Forarbeid

1. Slå av enheten
1. Sett inn SD-kortet i datamaskinen din
1. Kopier `GodMode9.firm` (eller `GodMode9.bin` for arm9loaderhax brukere) fra GodMode9 `.zip` til `/luma/payloads/` på SD-kortet ditt
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
1. Sett inn SD-kortet i konsollen igjen

##### Section II - Backup SysNAND DSiWare Saves

If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}

1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
1. Start GodMode9 ved å trykke (A)
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. Navigér til `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out"
  + This process may take some time if you have many DSiWare games
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen

##### Section III - Backup GBA VC Saves

If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}

Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Sett inn SD-kortet i datamaskinen din
1. Opprett en mappe kalt `files9` på roten av SD-kortet hvis den ikke allerede er der
1. Create a folder in `/files9/` for each GBA VC game that you want to backup the save for 
1. Sett inn SD-kortet i konsollen igjen
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Start GodMode9 ved å trykke (A)
  + Navigér til `[S:] SYSNAND VIRTUAL`
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigér til `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) to paste `gbavc.sav`
  + Press (Start) to reboot your device
1. Start på nytt mens og hold (Start) under oppstart for å starte Luma3DS chainloader menyen
1. Start GodMode9 ved å trykke (A)

##### Section IV - Copy EmuNAND to SysNAND

1. Navigér til `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
  + This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
  + Denne prosessen vil ta litt tid
1. Once it has completed, press (A) to continue
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) to return to the main menu

##### Section V - Restore DSiWare Saves

If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}

1. Navigate to `[0:] SDCARD` -> `gm9` -> `out`
1. Press (Y) on the `00030004` folder to copy it
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen
1. Navigér til `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Velg "Copy path(s)"
1. Trykk (A) for å låse opp SysNAND (lvl1) skriving, deretter trykk in den gitte tastekombinasjonen
1. Velg "Overwrite file(s)"
  + This process may take some time if you have many DSiWare games
1. Press (B) to decline relocking write permissions if prompted
1. Trykk (B) to ganger for å gå tilbake til hovedmenyen

##### Section VI - Restore GBA VC Saves

If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Start GodMode9 ved å trykke (A)
  + Navigér til `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigér til `[S:] SYSNAND VIRTUAL`
  + Press (Y) to paste `gbavc.sav`
  + Press (A) to confirm
  + Press (Start) to reboot your device
1. Start på nytt mens og hold (Start) under oppstart for å starte Luma3DS chainloader menyen
1. Start GodMode9 ved å trykke (A)

##### Section VII - Backup SysNAND

1. Press (Home) to bring up the action menu
1. Velg "More..."
1. Select "Scripts"
1. Select "Backup SysNAND"
1. Trykk (A) for å bekrefte
  + Denne prosessen vil ta litt tid
1. Trykk (A) for å fortsette
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
  + Make backups in multiple locations (such as online file storage)
  + Denne sikkerhetskopien vil spare deg fra en brick hvis noe går galt i fremtiden
1. Delete `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card after copying it
1. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet**

##### Section VIII - Format SD card

1. Sett inn SD-kortet i konsollen igjen
1. Press (Home) to bring up the action menu
1. Velg "More..."
1. Velg "SD format menu"
1. Trykk (A) for å bekrefte
1. Velg "No EmuNAND"
1. Velg "Auto"
1. Press (A) to accept the label `GM9SD`
  + Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy all your files back to your SD card
  + Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Sett inn SD-kortet i konsollen igjen
1. Trykk (A) for å montere SD-kortet på nytt
1. Trykk (Start) for å lagre og starte på nytt
1. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down)

___

Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}