Guide_Wii/_pages/pl_PL/move-emunand.txt

---
title: "Move EmuNAND"
---

This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Zauważ, że terminy EmuNand i RedNAND odnoszą się do nieco innych implementacji [tej samej idei] (http://3dbrew.org/wiki/NAND_Redirection).
{: .notice--info}

Note that if you have any payload files other than `GodMode9.firm` in the `/luma/payloads/` folder on your SD card, holding (Start) on boot will display a "chainloader menu" where you will have to use the D-Pad and the (A) button to select "GodMode9" for these instructions. 
{: .notice--info}

**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}

#### Czego potrzebujesz

* Istniejącego EmuNAND
* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)

#### Instrukcje

##### Sekcja I - Przygotowania

1. Power off your device
1. Włóż kartę SD do komputera
1. Copy `GodMode9.firm` (or `GodMode9.bin` for arm9loaderhax users) from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card
1. Reinsert your SD card into your device

##### Section II - Backup SysNAND DSiWare Saves

If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}

1. Launch GodMode9 by holding (Start) during boot
1. If you are prompted to create an essential files backup, press (A) to do so, then press (A) to continue once it has completed
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9/out"
  + This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu

##### Section III - Backup GBA VC Saves

If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}

Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Włóż kartę SD do komputera
1. Create a folder in `/gm9/` for each GBA VC game that you want to backup the save for 
1. Reinsert your SD card into your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[0:] SDCARD` -> `gm9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) to paste `gbavc.sav`
  + Press (Start) to reboot your device
1. Launch GodMode9 by holding (Start) during boot

##### Section IV - Copy EmuNAND to SysNAND

1. Navigate to `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
  + This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
  + This process will take some time
1. Once it has completed, press (A) to continue
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) to return to the main menu

##### Section V - Restore DSiWare Saves

If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}

1. Navigate to `[0:] SDCARD` -> `gm9` -> `out`
1. Press (Y) on the `00030004` folder to copy it
1. Press (B) twice to return to the main menu
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Select "Overwrite file(s)"
  + This process may take some time if you have many DSiWare games
1. Press (B) to decline relocking write permissions if prompted
1. Press (B) twice to return to the main menu

##### Section VI - Restore GBA VC Saves

If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[0:] SDCARD` -> `gm9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) to paste `gbavc.sav`
  + Press (A) to confirm
  + Press (Start) to reboot your device
1. Launch GodMode9 by holding (Start) during boot

##### Section VII - Backup SysNAND

1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Scripts..."
1. Select "Backup SysNAND"
1. Naciśnij (A) aby potwierdzić
  + This process will take some time
1. Naciśnij (A), aby kontynuować
1. Przytrzymaj przycisk (R) i jednocześnie naciśnij przycisk (B), aby bezpiecznie wyjąć kartę SD
1. Włóż kartę SD do komputera
1. Copy `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card to a safe location on your computer
  + Make backups in multiple locations (such as online file storage)
  + Ta kopia uratuje Cie przed brick'iem jeśli cokolwiek pójdzie nie tak w przyszłości
1. Delete `<serialnumber>_nandmin_###.bin` from the `/gm9/out/` folder on your SD card after copying it
1. **Utwórz kopię zapasową wszystkich plików na karcie SD do folderu na swoim komputerze. Wszystkie pliki znajdujące się obecnie na karcie SD zostaną usunięte w następnym kroku**

##### Section VIII - Format SD card

1. Reinsert your SD card into your device
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Wybierz "SD format menu"
1. Naciśnij (A) aby potwierdzić
1. Wybierz "No EmuNAND"
1. Wybierz opcję "Auto"
1. Press (A) to accept the label `GM9SD`
  + Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. Przytrzymaj przycisk (R) i jednocześnie naciśnij przycisk (B), aby bezpiecznie wyjąć kartę SD
1. Włóż kartę SD do komputera
1. Copy all your files back to your SD card
  + Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Reinsert your SD card into your device
1. Naciśnij przycisk (A), aby ponownie zamontować swoją kartę SD
1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie
1. Jeżeli uruchamianie konsoli zatrzyma się na czarnym ekranie, [wykonaj instrukcję rozwiązywania problemów](troubleshooting#ts_sys_down)

___

Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}