Guide_Wii/_pages/es_ES/wilbrand.md

---
title: "Wilbrand"
---

Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
{: .notice--info}

![Wilbrand](/images/wilbrand/icon.png)

Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the Wii Message Board.

Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
{: .notice--info}

There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
{: .notice--info}

### Wilbrand Web (Recommended)

#### Requisitos

- An SD card formatted to FAT32/MS-DOS
- A Wii on at least version 3.0

SD cards larger than 2GB will not work on Wii menu versions before 4.0.
{: .notice--warning}

#### Instrucciones

1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
1.  Click on "Download your .zip".
1.  Extrae el contenido del archivo ZIP recién descargado a la raíz de la tarjeta SD.
1.  Expulsa la tarjeta SD e insértala en tu Wii.
    - La tarjeta SD debe insertarse en la ranura para tarjetas SD ubicada en la parte frontal de la consola. No es posible usar un adaptador USB conectado a alguno de los puertos USB de la consola.
1.  En tu consola, ingresa al tablón de Wii.
1.  Load the green letter with the Bob-omb icon.
    - Asegúrate de que la fecha en tu Wii sea correcta, pues de lo contrario podrías ser incapaz de encontrar la carta.
    - The mail may have appeared on the previous or next day.
    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)

If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).

[Continuar a la instalación del Canal Homebrew y BootMii](hbc)
{: .notice--info}

### Wilbrand CLI

#### Requisitos

- A PC running Windows, MacOS or Linux
- An SD card formatted to FAT32/MS-DOS
- A Wii on at least version 3.0
- [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
- [HackMii Installer v1.2](https://bootmii.org/download/)

SD cards larger than 2GB will not work on Wii menu versions before 4.0.
{: .notice--warning}

#### Instrucciones

1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
1.  Extract the Wilbrand zip to a folder on your PC, preferably on your desktop.
1.  Insert your SD card into your PC.
1.  Open a terminal inside the folder Wilbrand was extracted to.
1.  Using your Wii's version and MAC address, run the following command:

- Windows: `.\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:`

  - `X:` is the drive letter of your SD card. ![running Wilbrand on Windows](/images/wilbrand/windows.png)

- Linux/MacOS: `./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir`
  - If you have not opened your terminal directly in the folder Wilbrand was extracted to, use `cd` to enter it first, eg. `cd ~/Desktop/Wilbrand`
  - `/media/mount_dir` is the folder your SD card is mounted in. This may vary depending on your Linux distro. ![running Wilbrand on Linux](/images/wilbrand/linux.png)

1.  Extract the HackMii Installer v1.2 to a folder on your PC.
    - You may also simply open the zip file in your archive manager.
1.  Locate the `boot.elf` file, and put it on the root of your SD card.
1.  Expulsa la tarjeta SD e insértala en tu Wii.
    - La tarjeta SD debe insertarse en la ranura para tarjetas SD ubicada en la parte frontal de la consola. No es posible usar un adaptador USB conectado a alguno de los puertos USB de la consola.
1.  En tu consola, ingresa al tablón de Wii.
1.  Load the green letter with the Bob-omb icon.
    - Asegúrate de que la fecha en tu Wii sea correcta, pues de lo contrario podrías ser incapaz de encontrar la carta.
    - The mail may have appeared on the previous or next day.
    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)

[Continuar a la instalación del Canal Homebrew y BootMii](hbc)
{: .notice--info}