diff --git a/_pages/en_US/bricks.md b/_pages/en_US/bricks.md index bde4f22ba..208a02297 100644 --- a/_pages/en_US/bricks.md +++ b/_pages/en_US/bricks.md @@ -18,7 +18,7 @@ Preventing a brick involves many rules that range between common sense and fail- + **Only install updates for your own region!**. + Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance. + **Do NOT delete or modify system files, and do NOT install any system file mods unless you know what you are doing! - + An example of modifying files going wrong is replacing IOS80 on Wii Mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick). + + An example of modifying files going wrong is replacing IOS80 on Wii mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick). + **Do NOT install homebrew from untrustworthy sources or if the source code is not available.** + Software on the [Open Shop Channel](osc) is safe. + There have been incidents of malicious software being developed for the Wii in the past, while other apps are just badly developed. Make sure that you know what you are installing, and only install what you need. @@ -175,7 +175,7 @@ While these caveats leave the Wii in a particularly dangerous situation, **it is This brick will appear identical to a low-level brick due to a Wii Menu failure via IOS; however there is not a full low-level NAND corruption, or a low-level hardware failure. #### Cause -This brick most often happens when the Wii Menu's IOS is a [stub](http://wiibrew.org/wiki/Stub_IOS). This is usually the consequence of attempting to downgrade your Wii menu. If this error began happening after installing a normal IOS80 to a Wii Mini, see [Wi-Fi brick](wi-fi-brick). +This brick most often happens when the Wii Menu's IOS is a [stub](http://wiibrew.org/wiki/Stub_IOS). This is usually the consequence of attempting to downgrade your Wii menu. If this error began happening after installing a normal IOS80 to a Wii mini, see [Wi-Fi brick](wi-fi-brick). #### Solutions [Recovery mode](recovery-mode) may or may not be accessible due to the nature of the brick, but Priiloader will almost always not work. If you cannot reach recovery mode, you must have BootMii as boot2 to fix this. If these conditions are not met, see [low-level brick](bricks#low-level-brick). @@ -193,12 +193,12 @@ This brick appears identical to a low-level brick, however you can still power o #### Cause This brick arises when your Wii's Wi-Fi (or Bluetooth) module is damaged or not inserted properly. In such cases, the Wii gets stuck on a black screen while awaiting a response from IOS. -This will also happen on the Wii Mini if you install a normal Wii IOS, because the Wii Mini doesn't have a Wi-Fi module. +This will also happen on the Wii mini if you install a normal Wii IOS, because the Wii mini doesn't have a Wi-Fi module. #### Solutions To resolve this problem, you can try to reseat or replace the Wi-Fi/Bluetooth module. -If you are on a Wii Mini, you must install a Wi-Fi module. +If you are on a Wii mini, you must install a Wi-Fi module. If both fail, see [low-level brick](bricks#low-level-brick). @@ -214,7 +214,7 @@ This brick occurs when boot1/boot2 is corrupt, or if there is a hardware failure First, troubleshooting must be done to determine if hardware is at fault. In the order listed, do the following: + Test to make sure that your Wii actually still functions (it accepts discs as normal, spins up correctly, Wiimotes connect) before attempting the following steps. If this is the case and only video is not being displayed, you may have an exceptionally rare failure of the video port or the GPU. -+ If on a Wii Mini, and if a normal IOS80 was installed, see [Wi-Fi brick](wi-fi-brick). If steps to resolve the Wi-Fi brick failed, proceed. ++ If on a Wii mini, and if a normal IOS80 was installed, see [Wi-Fi brick](wi-fi-brick). If steps to resolve the Wi-Fi brick failed, proceed. + Attempt to boot into [Recovery Mode](recovery-mode) (normal Wiis only). If the Wii boots into Recovery Mode, see [Wi-Fi brick](wi-fi-brick). If steps to resolve the Wi-Fi brick failed, proceed. + Reseat the disc drive and attempt to boot normally. If still unsuccessful, replace the disc drive. If still unsuccessful, proceed. + At this point, either there is a low level boot0/boot1 corruption, a NAND chip failure, or there is a wider unknown hardware failure. Consider consulting online help or buying another Wii. diff --git a/_pages/en_US/gcsaves.md b/_pages/en_US/gcsaves.md index ca0c6993d..9a0072b25 100644 --- a/_pages/en_US/gcsaves.md +++ b/_pages/en_US/gcsaves.md @@ -6,7 +6,7 @@ title: "GameCube Saves" This is a full guide on how to manage your GameCube saves. -Use of any GameCube peripheral with a Family Edition Wii or Wii Mini require soldering on GameCube ports and/or memory card slots. +Use of any GameCube peripheral with a Family Edition Wii or Wii mini require soldering on GameCube ports and/or memory card slots. {: .notice--info} ## Uploading an Individual Save (.gci File) to a Physical Memory Card diff --git a/_pages/en_US/get-started.md b/_pages/en_US/get-started.md index cbefcc7e7..5e1a920db 100644 --- a/_pages/en_US/get-started.md +++ b/_pages/en_US/get-started.md @@ -23,6 +23,6 @@ Select the exploit that corresponds to your console and situation the best. If t | Console Revision | Recommended Exploit | | ----------------- | ------------------- | | Wii/Wii Family Edition | If you can use a Windows PC:
Automatic Setup: Proceed to [ModMii](modmii)
If you can use an SD card:
Manual Setup: Proceed to [Wilbrand](wilbrand)
If you cannot use an SD card:
Manual Setup: Proceed to [str2hax](str2hax)
| -| Wii Mini | Proceed to [Bluebomb](bluebomb) | +| Wii mini | Proceed to [Bluebomb](bluebomb) | | Wii U (vWii) | If you have not modded your Wii U yet:
Proceed to [Introduction (wiiu.hacks.guide)](https://wiiu.hacks.guide/#/)
If your Wii U is already modded:
Proceed to [vWii Modding (wiiu.hacks.guide)](https://wiiu.hacks.guide/#/vwii-modding) | | Dolphin Emulator | Proceed to [Homebrew Channel on Dolphin](homebrew-dolphin) | diff --git a/_pages/en_US/priiloader.md b/_pages/en_US/priiloader.md index 92b5d4df2..97f019bb4 100644 --- a/_pages/en_US/priiloader.md +++ b/_pages/en_US/priiloader.md @@ -191,7 +191,7 @@ Your Wii should now automatically boot to whichever homebrew app you installed. 1. Press `B` to return to the main menu. 1. Scroll back up to `System Menu` and press A. -### Wii Mini: Next Steps +### Wii mini: Next Steps Continue to [Wii mini cIOS](cios-mini)
This guide provides installation instructions for cIOS on Wii minis. diff --git a/_pages/en_US/site-navigation.md b/_pages/en_US/site-navigation.md index 415affc28..c49057182 100644 --- a/_pages/en_US/site-navigation.md +++ b/_pages/en_US/site-navigation.md @@ -45,7 +45,7 @@ sitemap: false + [Priiloader](priiloader) + [Relaunching the HackMii Installer](hackmii) + [Updating Wii Menu to v4.3](update) -+ [Wii Mini NAND Dumper](wnd-mini) ++ [Wii mini NAND Dumper](wnd-mini) + [YAWM ModMii Edition](yawmme) {% endcapture %}
{{ notice-4 | markdownify }}