some fixes; close #1102

_pages/en_US/Finalizing-Setup.txt

@@ -131,7 +131,10 @@ If, before following this guide, you already had an EmuNAND setup and would like
 
 1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `luma` -> `payloads`
+1. Press (X) on `start_SafeB9SInstaller.bin` to delete it
+1. Press (A) to confirm
+1. Press (B) to return to `[0:] SDCARD`
 1. Press (Y) on `boot.firm` to copy it
 1. Press (B) to return to the main menu
 1. Navigate to `[1:] SYSNAND CTRNAND`
@@ -139,14 +142,15 @@ If, before following this guide, you already had an EmuNAND setup and would like
 1. Select "Copy path(s)"
 1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
 1. Press (B) to return to the main menu
-1. Hold (R) and press (B) at the same time to eject your SD card
-1. Remove your SD card from your device
-1. Press (Start) to reboot your device with your SD card removed
-  + Booting your device at least once with your SD card removed will allow you to configure the CTRNAND based Luma3DS installation
-1. Use the (A) button and the D-Pad to turn on the following:    
-  + **"Show NAND or user string in System Settings"**
-1. Reinsert your SD card into your device
-1. Press (Start) to save and reboot
+1. Navigate to `[0:] SDCARD`
+1. Press (Y) on the `luma` folder to copy it
+1. Press (B) to return to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
+1. Press (X) on the existing `luma` folder to delete it
+  + If you do not have this folder, just proceed with the instructions
+1. Press (A) to confirm
+1. Press (Y) to paste a copy of the `luma` folder from your SD card
+1. Press (Start) to reboot
 
 ##### Section IX - NAND Backup
 

_pages/en_US/Installing-Boot9Strap-(Homebrew-Launcher).txt

@@ -42,7 +42,8 @@ To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on th
   + If it freezes, just force the console to power off by holding the power button, then try again
 1. Launch safehax from the list of homebrew
   + You may have to scroll down to see this option
-  + If you get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
+  + If you get a "PM INIT FAILED" error, make sure you ran udsploit with Wireless Communication turned on
+  + If you *still* get a "PM INIT FAILED" error, try using the [r19 release of safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
   + If it freezes, just force the console to power off by holding the power button, then try again
 1. If the exploit was successful, you will have booted into SafeB9SInstaller
 

_pages/en_US/Troubleshooting.txt

@@ -174,7 +174,7 @@ If an error occurs during the SafeB9SInstaller process, you will be prompted to
 1. Press (Y) to copy the files
 1. Press (B) twice to return to the main menu
 1. Navigate to `[S:] SYSNAND VIRTUAL`
-1. Press (Y) to paste the files
+1. Press (Y) to paste a copy of `firm0firm1.bak` and `sector0x96.bak`
 1. Press (A) to confirm
 1. Press (A) to inject the files
 1. Press (A) to unlock SysNAND overwriting

_pages/en_US/Updating-to-Boot9Strap.txt

@@ -102,14 +102,15 @@ This section is only needed if you are prompted with the Luma3DS configuration m
   + If you do not have this file, just proceed with the instructions
 1. Press (A) to confirm
 1. Press (B) to return to the main menu
-1. Hold (R) and press (B) at the same time to eject your SD card
-1. Remove your SD card from your device
-1. Press (Start) to reboot your device with your SD card removed
-  + Booting your device at least once with your SD card removed will allow you to configure the CTRNAND based Luma3DS installation
-1. Use the (A) button and the D-Pad to turn on the following:    
-  + **"Show NAND or user string in System Settings"**
-1. Reinsert your SD card into your device
-1. Press (Start) to save and reboot
+1. Navigate to `[0:] SDCARD`
+1. Press (Y) on the `luma` folder to copy it
+1. Press (B) to return to the main menu
+1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
+1. Press (X) on the existing `luma` folder to delete it
+  + If you do not have this folder, just proceed with the instructions
+1. Press (A) to confirm
+1. Press (Y) to paste a copy of the `luma` folder from your SD card
+1. Press (Start) to reboot
 
 ##### Section V - Installing Luma3DS Updater