diff --git a/_pages/af_ZA/deleting-vffs.md b/_pages/af_ZA/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/af_ZA/deleting-vffs.md
+++ b/_pages/af_ZA/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/af_ZA/dump-games.md b/_pages/af_ZA/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/af_ZA/dump-games.md
+++ b/_pages/af_ZA/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/af_ZA/get-started.md b/_pages/af_ZA/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/af_ZA/get-started.md
+++ b/_pages/af_ZA/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/af_ZA/modmii.md b/_pages/af_ZA/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/af_ZA/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/af_ZA/priiloader.md b/_pages/af_ZA/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/af_ZA/priiloader.md
+++ b/_pages/af_ZA/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/af_ZA/riiconnect24-vwii.md b/_pages/af_ZA/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/af_ZA/riiconnect24-vwii.md
+++ b/_pages/af_ZA/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/af_ZA/riitag.md b/_pages/af_ZA/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/af_ZA/riitag.md
+++ b/_pages/af_ZA/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/af_ZA/site-navigation.md b/_pages/af_ZA/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/af_ZA/site-navigation.md
+++ b/_pages/af_ZA/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/af_ZA/themes-vwii.md b/_pages/af_ZA/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/af_ZA/themes-vwii.md
+++ b/_pages/af_ZA/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/af_ZA/themes.md b/_pages/af_ZA/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/af_ZA/themes.md
+++ b/_pages/af_ZA/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/af_ZA/wiilink.md b/_pages/af_ZA/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/af_ZA/wiilink.md
+++ b/_pages/af_ZA/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/af_ZA/wiimmfi.md b/_pages/af_ZA/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/af_ZA/wiimmfi.md
+++ b/_pages/af_ZA/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/af_ZA/wilbrand.md b/_pages/af_ZA/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/af_ZA/wilbrand.md
+++ b/_pages/af_ZA/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ar_SA/deleting-vffs.md b/_pages/ar_SA/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/ar_SA/deleting-vffs.md
+++ b/_pages/ar_SA/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/ar_SA/dump-games.md b/_pages/ar_SA/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/ar_SA/dump-games.md
+++ b/_pages/ar_SA/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ar_SA/get-started.md b/_pages/ar_SA/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/ar_SA/get-started.md
+++ b/_pages/ar_SA/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/ar_SA/modmii.md b/_pages/ar_SA/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/ar_SA/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/ar_SA/priiloader.md b/_pages/ar_SA/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/ar_SA/priiloader.md
+++ b/_pages/ar_SA/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ar_SA/riiconnect24-vwii.md b/_pages/ar_SA/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/ar_SA/riiconnect24-vwii.md
+++ b/_pages/ar_SA/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ar_SA/riitag.md b/_pages/ar_SA/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/ar_SA/riitag.md
+++ b/_pages/ar_SA/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/ar_SA/site-navigation.md b/_pages/ar_SA/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/ar_SA/site-navigation.md
+++ b/_pages/ar_SA/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/ar_SA/themes-vwii.md b/_pages/ar_SA/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/ar_SA/themes-vwii.md
+++ b/_pages/ar_SA/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ar_SA/themes.md b/_pages/ar_SA/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/ar_SA/themes.md
+++ b/_pages/ar_SA/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/ar_SA/wiilink.md b/_pages/ar_SA/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/ar_SA/wiilink.md
+++ b/_pages/ar_SA/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/ar_SA/wiimmfi.md b/_pages/ar_SA/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/ar_SA/wiimmfi.md
+++ b/_pages/ar_SA/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/ar_SA/wilbrand.md b/_pages/ar_SA/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/ar_SA/wilbrand.md
+++ b/_pages/ar_SA/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ca_ES/deleting-vffs.md b/_pages/ca_ES/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/ca_ES/deleting-vffs.md
+++ b/_pages/ca_ES/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/ca_ES/dump-games.md b/_pages/ca_ES/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/ca_ES/dump-games.md
+++ b/_pages/ca_ES/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ca_ES/get-started.md b/_pages/ca_ES/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/ca_ES/get-started.md
+++ b/_pages/ca_ES/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/ca_ES/modmii.md b/_pages/ca_ES/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/ca_ES/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/ca_ES/priiloader.md b/_pages/ca_ES/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/ca_ES/priiloader.md
+++ b/_pages/ca_ES/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ca_ES/riiconnect24-vwii.md b/_pages/ca_ES/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/ca_ES/riiconnect24-vwii.md
+++ b/_pages/ca_ES/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ca_ES/riitag.md b/_pages/ca_ES/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/ca_ES/riitag.md
+++ b/_pages/ca_ES/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/ca_ES/site-navigation.md b/_pages/ca_ES/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/ca_ES/site-navigation.md
+++ b/_pages/ca_ES/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/ca_ES/themes-vwii.md b/_pages/ca_ES/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/ca_ES/themes-vwii.md
+++ b/_pages/ca_ES/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ca_ES/themes.md b/_pages/ca_ES/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/ca_ES/themes.md
+++ b/_pages/ca_ES/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/ca_ES/wiilink.md b/_pages/ca_ES/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/ca_ES/wiilink.md
+++ b/_pages/ca_ES/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/ca_ES/wiimmfi.md b/_pages/ca_ES/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/ca_ES/wiimmfi.md
+++ b/_pages/ca_ES/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/ca_ES/wilbrand.md b/_pages/ca_ES/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/ca_ES/wilbrand.md
+++ b/_pages/ca_ES/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/cs_CZ/deleting-vffs.md b/_pages/cs_CZ/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/cs_CZ/deleting-vffs.md
+++ b/_pages/cs_CZ/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/cs_CZ/dump-games.md b/_pages/cs_CZ/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/cs_CZ/dump-games.md
+++ b/_pages/cs_CZ/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/cs_CZ/get-started.md b/_pages/cs_CZ/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/cs_CZ/get-started.md
+++ b/_pages/cs_CZ/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/cs_CZ/modmii.md b/_pages/cs_CZ/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/cs_CZ/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/cs_CZ/priiloader.md b/_pages/cs_CZ/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/cs_CZ/priiloader.md
+++ b/_pages/cs_CZ/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/cs_CZ/riiconnect24-vwii.md b/_pages/cs_CZ/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/cs_CZ/riiconnect24-vwii.md
+++ b/_pages/cs_CZ/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/cs_CZ/riitag.md b/_pages/cs_CZ/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/cs_CZ/riitag.md
+++ b/_pages/cs_CZ/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/cs_CZ/site-navigation.md b/_pages/cs_CZ/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/cs_CZ/site-navigation.md
+++ b/_pages/cs_CZ/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/cs_CZ/themes-vwii.md b/_pages/cs_CZ/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/cs_CZ/themes-vwii.md
+++ b/_pages/cs_CZ/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/cs_CZ/themes.md b/_pages/cs_CZ/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/cs_CZ/themes.md
+++ b/_pages/cs_CZ/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/cs_CZ/wiilink.md b/_pages/cs_CZ/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/cs_CZ/wiilink.md
+++ b/_pages/cs_CZ/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/cs_CZ/wiimmfi.md b/_pages/cs_CZ/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/cs_CZ/wiimmfi.md
+++ b/_pages/cs_CZ/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/cs_CZ/wilbrand.md b/_pages/cs_CZ/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/cs_CZ/wilbrand.md
+++ b/_pages/cs_CZ/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/da_DK/deleting-vffs.md b/_pages/da_DK/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/da_DK/deleting-vffs.md
+++ b/_pages/da_DK/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/da_DK/dump-games.md b/_pages/da_DK/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/da_DK/dump-games.md
+++ b/_pages/da_DK/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/da_DK/get-started.md b/_pages/da_DK/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/da_DK/get-started.md
+++ b/_pages/da_DK/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/da_DK/modmii.md b/_pages/da_DK/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/da_DK/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/da_DK/priiloader.md b/_pages/da_DK/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/da_DK/priiloader.md
+++ b/_pages/da_DK/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/da_DK/riiconnect24-vwii.md b/_pages/da_DK/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/da_DK/riiconnect24-vwii.md
+++ b/_pages/da_DK/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/da_DK/riitag.md b/_pages/da_DK/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/da_DK/riitag.md
+++ b/_pages/da_DK/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/da_DK/site-navigation.md b/_pages/da_DK/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/da_DK/site-navigation.md
+++ b/_pages/da_DK/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/da_DK/themes-vwii.md b/_pages/da_DK/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/da_DK/themes-vwii.md
+++ b/_pages/da_DK/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/da_DK/themes.md b/_pages/da_DK/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/da_DK/themes.md
+++ b/_pages/da_DK/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/da_DK/wiilink.md b/_pages/da_DK/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/da_DK/wiilink.md
+++ b/_pages/da_DK/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/da_DK/wiimmfi.md b/_pages/da_DK/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/da_DK/wiimmfi.md
+++ b/_pages/da_DK/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/da_DK/wilbrand.md b/_pages/da_DK/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/da_DK/wilbrand.md
+++ b/_pages/da_DK/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/de_DE/deleting-vffs.md b/_pages/de_DE/deleting-vffs.md
index c1e47feb1..6c0a38a27 100644
--- a/_pages/de_DE/deleting-vffs.md
+++ b/_pages/de_DE/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - Eine SD-Karte oder ein USB-Laufwerk
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Anleitung
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/de_DE/dump-games.md b/_pages/de_DE/dump-games.md
index ffd4e1d0d..606f01f55 100644
--- a/_pages/de_DE/dump-games.md
+++ b/_pages/de_DE/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/de_DE/get-started.md b/_pages/de_DE/get-started.md
index a32116771..796c1da3b 100644
--- a/_pages/de_DE/get-started.md
+++ b/_pages/de_DE/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/de_DE/modmii.md b/_pages/de_DE/modmii.md
new file mode 100644
index 000000000..b9df64c02
--- /dev/null
+++ b/_pages/de_DE/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Inhaltsverzeichnis" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* Eine Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Beschreibung                                                                                                                                                                                                                               |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Beschreibung                                                                                                  |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/de_DE/priiloader.md b/_pages/de_DE/priiloader.md
index 609d21588..eb3791c87 100644
--- a/_pages/de_DE/priiloader.md
+++ b/_pages/de_DE/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - Eine SD-Karte oder ein USB-Laufwerk
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Anleitung
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/de_DE/riiconnect24-vwii.md b/_pages/de_DE/riiconnect24-vwii.md
index 111ffe3cf..d7c30d131 100644
--- a/_pages/de_DE/riiconnect24-vwii.md
+++ b/_pages/de_DE/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* Eine SD-Karte oder ein USB-Laufwerk
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- Eine SD-Karte oder ein USB-Laufwerk
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Abschnitt 2 - WADs Installieren
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/de_DE/riitag.md b/_pages/de_DE/riitag.md
index 02c14d27b..59b662d5f 100644
--- a/_pages/de_DE/riitag.md
+++ b/_pages/de_DE/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/de_DE/site-navigation.md b/_pages/de_DE/site-navigation.md
index cd855a139..2611d6915 100644
--- a/_pages/de_DE/site-navigation.md
+++ b/_pages/de_DE/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew-Kanal](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [RSSMii entfernen](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag auf der Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/de_DE/themes-vwii.md b/_pages/de_DE/themes-vwii.md
index f5d820cf0..b0cb88cff 100644
--- a/_pages/de_DE/themes-vwii.md
+++ b/_pages/de_DE/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/de_DE/themes.md b/_pages/de_DE/themes.md
index 4d2741ccd..c31427fd2 100644
--- a/_pages/de_DE/themes.md
+++ b/_pages/de_DE/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/de_DE/wiilink.md b/_pages/de_DE/wiilink.md
index 86aad969f..11dc58b6f 100644
--- a/_pages/de_DE/wiilink.md
+++ b/_pages/de_DE/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - Eine SD-Karte oder ein USB-Laufwerk
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Anleitung
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Starte den Homebrew-Kanal auf deiner Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Starte den Homebrew-Kanal auf deiner Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/de_DE/wiimmfi.md b/_pages/de_DE/wiimmfi.md
index 5d03bde3a..e4afb7bde 100644
--- a/_pages/de_DE/wiimmfi.md
+++ b/_pages/de_DE/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/de_DE/wilbrand.md b/_pages/de_DE/wilbrand.md
index c9b75638b..4ba9b791f 100644
--- a/_pages/de_DE/wilbrand.md
+++ b/_pages/de_DE/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Anleitung
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Anleitung
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/el_GR/deleting-vffs.md b/_pages/el_GR/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/el_GR/deleting-vffs.md
+++ b/_pages/el_GR/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/el_GR/dump-games.md b/_pages/el_GR/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/el_GR/dump-games.md
+++ b/_pages/el_GR/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/el_GR/get-started.md b/_pages/el_GR/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/el_GR/get-started.md
+++ b/_pages/el_GR/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/el_GR/modmii.md b/_pages/el_GR/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/el_GR/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/el_GR/priiloader.md b/_pages/el_GR/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/el_GR/priiloader.md
+++ b/_pages/el_GR/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/el_GR/riiconnect24-vwii.md b/_pages/el_GR/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/el_GR/riiconnect24-vwii.md
+++ b/_pages/el_GR/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/el_GR/riitag.md b/_pages/el_GR/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/el_GR/riitag.md
+++ b/_pages/el_GR/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/el_GR/site-navigation.md b/_pages/el_GR/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/el_GR/site-navigation.md
+++ b/_pages/el_GR/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/el_GR/themes-vwii.md b/_pages/el_GR/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/el_GR/themes-vwii.md
+++ b/_pages/el_GR/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/el_GR/themes.md b/_pages/el_GR/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/el_GR/themes.md
+++ b/_pages/el_GR/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/el_GR/wiilink.md b/_pages/el_GR/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/el_GR/wiilink.md
+++ b/_pages/el_GR/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/el_GR/wiimmfi.md b/_pages/el_GR/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/el_GR/wiimmfi.md
+++ b/_pages/el_GR/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/el_GR/wilbrand.md b/_pages/el_GR/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/el_GR/wilbrand.md
+++ b/_pages/el_GR/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/es_EM/deleting-vffs.md b/_pages/es_EM/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/es_EM/deleting-vffs.md
+++ b/_pages/es_EM/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/es_EM/dump-games.md b/_pages/es_EM/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/es_EM/dump-games.md
+++ b/_pages/es_EM/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/es_EM/get-started.md b/_pages/es_EM/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/es_EM/get-started.md
+++ b/_pages/es_EM/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/es_EM/modmii.md b/_pages/es_EM/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/es_EM/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/es_EM/priiloader.md b/_pages/es_EM/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/es_EM/priiloader.md
+++ b/_pages/es_EM/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/es_EM/riiconnect24-vwii.md b/_pages/es_EM/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/es_EM/riiconnect24-vwii.md
+++ b/_pages/es_EM/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/es_EM/riitag.md b/_pages/es_EM/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/es_EM/riitag.md
+++ b/_pages/es_EM/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/es_EM/site-navigation.md b/_pages/es_EM/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/es_EM/site-navigation.md
+++ b/_pages/es_EM/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/es_EM/themes-vwii.md b/_pages/es_EM/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/es_EM/themes-vwii.md
+++ b/_pages/es_EM/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/es_EM/themes.md b/_pages/es_EM/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/es_EM/themes.md
+++ b/_pages/es_EM/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/es_EM/wiilink.md b/_pages/es_EM/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/es_EM/wiilink.md
+++ b/_pages/es_EM/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/es_EM/wiimmfi.md b/_pages/es_EM/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/es_EM/wiimmfi.md
+++ b/_pages/es_EM/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/es_EM/wilbrand.md b/_pages/es_EM/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/es_EM/wilbrand.md
+++ b/_pages/es_EM/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/es_ES/cios-mini.md b/_pages/es_ES/cios-mini.md
index b872dad58..b25282b49 100644
--- a/_pages/es_ES/cios-mini.md
+++ b/_pages/es_ES/cios-mini.md
@@ -1,25 +1,25 @@
 ---
-title: "Instalar d2xl cIOS para Wii Mini"
+title: "Instalar cIOS d2xl para Wii mini"
 ---
 
-{% include toc title="Tabla de contenidos" %}
+{% include toc title="Tabla de contenido" %}
 
-Esta guía te ayudará a instalar el d2xl cIOS de Leseratte para Wii Mini (IOS personalizado). Esto es necesario si deseas cargar juegos por medio de un USB Loader. Algunas aplicaciones homebrew pueden funcionar mejor usando cIOS.
+En esta guía aprenderás a instalar el cIOS (IOS personalizado) d2xl para Wii mini, creado por Leseratte. Esto te permitirá cargar juegos desde una unidad USB y usar ciertas aplicaciones homebrew.
 
-![Logotipo de d2x cIOS Installer](/images/cios/cIOS.png)
+![Icono de d2x cIOS Installer](/images/cios/cIOS.png)
 
-Esta guía es solo para usuarios de Wii Mini. Si tienes una Wii, entonces sigue [esta guía](cios).
+Esta guía solo aplica para usuarios de Wii mini. Si tienes una Wii original, por favor sigue [esta guía](cios).
 {: .notice--warning}
 
 Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en el [servidor de Discord](https://discord.gg/6ryxnkS) de Wii mini Hacking. Soporte disponible solo en inglés.
 {: .notice--info}
 
-Esta versión de d2x cIOS installer fue originalmente desarrollada para el vWii por DaveBaol y el cIOS ha sido creado por Leseratte específicicamente para la Wii Mini. La página de descarga original puede ser encontrada [aquí](https://wii.leseratte10.de/d2xl-cIOS/). El repositorio en GitHub puede ser visitado [aquí](https://github.com/Leseratte10/d2xl-cios). No se han reportado problemas en el funcionamiento de este cIOS, sin embargo, ten en cuenta que aún se encuentra en fase experimental.
+El instalador de este cIOS originalmente fue desarrollado para la vWii de Wii U por DaveBaol, mientras que el cIOS fue diseñado por Leseratte específicamente para la Wii mini. La página de descarga original se encuentra [aquí](https://wii.leseratte10.de/d2xl-cIOS/), y el repositorio en GitHub puede ser visitado [aquí](https://github.com/Leseratte10/d2xl-cios). No se han reportado problemas en el funcionamiento de este cIOS, sin embargo, ten en cuenta que aún se encuentra en fase experimental.
 {: .notice--info}
 
 #### Requisitos
 
-* Una Wii Mini con el Canal Homebrew instalado
+* Una Wii mini con el Canal Homebrew instalado
 * Una unidad USB
 * [d2xl cIOS Installer](/assets/files/d2xl_wii_mini_cIOS_installer_v1_beta2.zip) de Leseratte
 
@@ -28,32 +28,32 @@ Esta versión de d2x cIOS installer fue originalmente desarrollada para el vWii
 ##### Sección I - Descarga
 
 1. Extrae d2xl cIOS Installer a la carpeta `apps` en tu unidad USB.
-1. Inserta la unidad USB en tu Wii Mini e inicia d2xl cIOS Installer desde el Canal Homebrew.
+1. Inserta la unidad USB en tu Wii mini e inicia d2xl cIOS Installer desde el Canal Homebrew.
 
 ##### Sección II - Instalación
 
 1. Presiona continuar y después ajusta las opciones de la siguiente manera:
     ```
-    Seleccionar cIOS: d2xl-v1-beta2
-    Seleccionar base cIOS: 57
-    Seleccionar ranura cIOS: 249
+    Select cIOS: d2xl-v1-beta2
+    Select cIOS base: 57
+    Select cIOS slot: 249
     ```
-Toma nota del número de versión en cuestión (`IOS57-64` terminando ya sea en `v31776` o `v31775`)
-1. Una vez que todas las opciones hayan sido ajustadas correctamente, pulsa A dos veces para comenzar a instalar. Cuando el proceso haya terminado correctamente, sal del instalador.
-   - Si la instalación falla debido al error `TMD version mismatch`, pulsa la cruz de control a izquierda o derecha sobre la opción `Select cIOS` hasta que el número de versión sea diferente al que has usado anteriormente. El número 57 no cambiará.
+Revisa que el número de versión que aparece después de `IOS57-64-` en la parte inferior sea `v31776` o `v31775`.
+1. Una vez que todas las opciones hayan sido ajustadas correctamente, pulsa A dos veces para comenzar a instalar. Si el proceso ha sido exitoso, ahora puedes salir del instalador.
+   - Si la instalación falla debido al error `TMD version mismatch`, pulsa izquierda o derecha en el botón cruz sobre la opción `Select cIOS` hasta que el número de versión sea diferente al que has usado anteriormente. El número 57 no cambiará.
 
 
 ##### Activar Ethernet
-Si deseas jugar en Wiimmfi con tu Wii Mini, tendrás que hacerlo a través de Ethernet, y para eso necesitarás ejecutar la aplicación homebrew [Wii Mini Ethernet Enabler](/assets/files/Wii_Mini_Ethernet_Enable.zip) creada por Fullmetal5. Extrae Wii Mini Ethernet Enabler a la carpeta `apps` en tu unidad USB y después inicia la aplicación desde el Canal Homebrew.
+Si deseas jugar en Wiimmfi desde tu Wii mini, deberás hacerlo a través de Ethernet, para lo cual necesitarás ejecutar la aplicación homebrew [Ethernet Enabler](/assets/files/Wii_Mini_Ethernet_Enable.zip), creada por Fullmetal5. Extrae el archivo a la carpeta `apps` en tu unidad USB y después inicia la aplicación desde el Canal Homebrew.
 
-The Wii and Wii mini consoles are only known to work with Ethernet adapters using the AX88772 chip. Please check that the product is compatible before you buy. This one from UGREEN is known to be compatible: [Amazon Europe](https://www.amazon.de/dp/B00MYT481C), [Amazon US](https://www.amazon.com/dp/B08DRKYKMM/)
+Las consolas Wii y Wii mini solo pueden utilizar adaptadores Ethernet con el chip AX88772. Por favor asegúrate de que el adaptador sea compatible antes de comprarlo. Este producto de UGREEN está confirmado como compatible. Lo puedes adquirir desde [Amazon Europa](https://www.amazon.de/dp/B00MYT481C) o [Amazon Estados Unidos](https://www.amazon.com/dp/B08DRKYKMM/).
 {: .notice--info}
 
-Do not attempt to install a Wii IOS or System Menu on the Wii mini. Doing so will likely brick your console.
+No intentes instalar ningún IOS o System Menu nativo de Wii en una Wii mini. Hacer esto conlleva un gran riesgo de que tu consola sufra un brick.
 {: .notice--warning}
 
-You can now use homebrew such as [USB Loader GX](usbloadergx) and [WiiFlow](wiiflow).
+Ahora puedes usar aplicaciones homebrew como [USB Loader GX](usbloadergx) y [WiiFlow](wiiflow).
 {: .notice--info}
 
-[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+[Ir al mapa del sitio](site-navigation)<br> Tenemos muchas otras guías que podrían interesarte.
 {: .notice--info}
diff --git a/_pages/es_ES/cios.md b/_pages/es_ES/cios.md
index 64032907d..43e4f03bc 100644
--- a/_pages/es_ES/cios.md
+++ b/_pages/es_ES/cios.md
@@ -4,11 +4,11 @@ title: "Instalar cIOS d2x"
 
 {% include toc title="Tabla de contenido" %}
 
-En este tutorial aprenderás a instalar un cIOS (IOS personalizado). Esto te permitirá cargar juegos desde una unidad USB o tarjeta SD y usar ciertas aplicaciones homebrew.
+Con esta guía aprenderás a instalar el cIOS (IOS personalizado) d2x. Esto te permitirá cargar juegos desde una unidad USB o tarjeta SD y usar ciertas aplicaciones homebrew.
 
-![Logotipo de d2x cIOS Installer](/images/cios/cIOS.png)
+![Icono de d2x cIOS Installer](/images/cios/cIOS.png)
 
-Si tu consola es una Wii U y deseas instalar el cIOS en el modo Wii (vWii), por favor sigue [este tutorial](https://wiiu.hacks.guide/#/vwii-modding). No intentes instalar ningún otro cIOS en la vWii, pues no funcionará.
+Si tu consola es una Wii U y deseas instalar el cIOS en el modo Wii (vWii), por favor sigue [esta guía](https://wiiu.hacks.guide/#/vwii-modding). No intentes instalar ningún otro cIOS en la vWii, pues no funcionará.
 {: .notice--info}
 
 Si tienes una Wii mini, por favor instala [este cIOS](cios-mini). Intentar instalar cualquier otro cIOS en la Wii mini no funcionará.
@@ -16,39 +16,39 @@ Si tienes una Wii mini, por favor instala [este cIOS](cios-mini). Intentar insta
 
 #### Requisitos
 
-- Una consola Wii
+- Una consola Wii original
 - Una tarjeta SD o unidad USB
 - [d2x cIOS Installer](https://hbb1.oscwii.org/hbb/d2x-cios-installer/d2x-cios-installer.zip)
 
-Ensure that if you are using an SD card, the lock switch is in the unlocked position, otherwise you will not be able to select the correct options in the installer.
+Si vas a usar una tarjeta SD, asegúrate de que no esté protegida contra escritura, pues de lo contrario no podrás elegir las opciones correctas en el instalador.
 {: .notice--warning}
 
 #### Instrucciones
 
 ##### Sección I - Descarga
 
-If your Wii has an Internet connection, you may skip this section. <br/> However, If you encounter any errors like `tcp_read timeout` and `net_gethostbyname failed:`, this will allow the Wii to skip the downloading step.
+Si tu consola está conectada a internet, puedes saltar esta sección. <br/> Sin embargo, también puedes seguir este procedimiento si al comenzar la instalación aparecen los errores `tcp_read timeout` y `net_gethostbyname failed:`.
 {: .notice--warning}
 
-If you are not on Windows, you may download & run [this script](/assets/files/d2x_offline_ios.sh), and it will download the WAD files for you.
+Si tu PC no ejecuta Windows, puedes descargar y ejecutar [este script](/assets/files/d2x_offline_ios.sh), el cual descargará los archivos WAD necesarios de forma automática.
 {: .notice--info}
 
-1. Download, extract, and run [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
-1. Select "Database", "IOS", then "IOS38", and select "v4123".
-   - Ensure that "Pack WAD" is checked.
-   - *Don't* check "Patch IOS". That is the cIOS Installer's job.
-1. Click `Start NUS Download!`.
-1. Repeat the step 2 & 3 for `IOS56 v5661`, `IOS57 v5918` and `IOS58 v6175`.
-1. Once you have downloaded all four IOS, there will be a folder named `titles` in the same folder as the NUS Downloader. <br/> Open the folder and navigate through them until you locate the four WAD files you downloaded. Place each WAD file on the root of your SD card or USB drive.
-  - This must be the same device containing the d2x cIOS Installer.
+1. Descarga, extrae y ejecuta [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
+1. Selecciona `Database` > `IOS` > `IOS38` > `v4123`.
+   - Asegúrate de que la opción `Pack WAD` esté marcada.
+   - *No* selecciones `Patch IOS`. El instalador del cIOS se encargará de aplicar los parches necesarios.
+1. Haz clic en `Start NUS Download!`.
+1. Repite los pasos 2 y 3 para `IOS56 v5661`, `IOS57 v5918`, e `IOS58 v6175`.
+1. Una vez que hayas descargado los cuatro IOS, habrá una carpeta llamada `titles` en el mismo directorio que el programa NUS Downloader. <br/> Entra a la carpeta hasta encontrar los cuatro archivos WAD que acabas de descargar. Copia todos los archivos WAD a la raíz de tu tarjeta SD o unidad USB.
+  - Este deber ser el mismo dispositivo donde vayas a copiar la aplicación d2x cIOS Installer.
 
-The WAD files should be on your SD card like this: ![offline IOS files](/images/cios/d2x_offline_ios.png)
+Tras haber copiado los archivos WAD a la tarjeta SD o unidad USB, la raíz debería quedar de la siguiente manera:![Archivos WAD para instalar cIOS sin conexión](/images/cios/d2x_offline_ios.png)
 {: .notice--info}
 ##### Sección II - Instalación
 
-1. Download the d2x cIOS installer and extract the zip to the root of your SD card or USB drive.
-1. Insert the SD card or USB drive into your Wii, and launch the d2x cIOS Installer from the Homebrew Channel
-1. Press A to continue, then set the options to the following:
+1. Descarga la aplicación d2x cIOS Installer, y extrae el archivo ZIP a la raíz de tu tarjeta SD o unidad USB.
+1. Inserta la tarjeta SD o unidad USB en tu Wii, e inicia d2x cIOS Installer desde el Canal Homebrew.
+1. Oprime A para continuar, después ajusta las opciones de la siguiente forma:
 
 ```
 Select cIOS: d2x-v11-beta1
@@ -57,13 +57,13 @@ Select cIOS slot: 248
 Select cIOS version: 65535
 ```
 
-If `d2x-v11-beta1` isn't showing up, try select the cIOS base first, then check again. This can also happen if your SD card is locked.
+Si no aparece la opción `d2x-v11-beta1`, ajusta primero `Select cIOS base`, y luego vuelve a intentarlo. Esto también puede ocurrir si la tarjeta SD está protegida contra escritura.
 {: .notice--info}
 
-![Install cIOS 248](/images/cios/d2x_v11_248.png)
+![Instalando cIOS 248](/images/cios/d2x_v11_248.png)
 
-1. Una vez que todas las opciones hayan sido ajustadas correctamente, repite el proceso y presiona A dos veces para comenzar la siguiente instalación.
-1. Cuando la instalación haya finalizado correctamente, vuelve a presionar A para volver al menú anterior y esta vez ajusta otra vez las opciones de la siguiente forma:
+1. Una vez que todas las opciones hayan sido ajustadas correctamente, oprime A dos veces para comenzar la instalación.
+1. Si la instalación ha sido exitosa, presiona A para volver al menú anterior y esta vez ajusta las opciones de la siguiente forma:
 
 ```
 Select cIOS: d2x-v11-beta1
@@ -72,10 +72,10 @@ Select cIOS slot: 249
 Select cIOS version: 65535
 ```
 
-![Install cIOS 249](/images/cios/d2x_v11_249.png)
+![Instalando cIOS 249](/images/cios/d2x_v11_249.png)
 
-1. Una vez que todas las opciones hayan sido ajustadas correctamente, repite el proceso y presiona A dos veces para comenzar la siguiente instalación.
-1. Cuando la instalación haya finalizado correctamente, vuelve a presionar A para volver al menú anterior y esta vez ajusta otra vez las opciones de la siguiente forma:
+1. Una vez que todas las opciones hayan sido ajustadas correctamente, oprime A dos veces para comenzar la instalación.
+1. Si la instalación ha sido exitosa, presiona A para volver al menú anterior y esta vez ajusta las opciones de la siguiente forma:
 
 ```
 Select cIOS: d2x-v11-beta1
@@ -84,10 +84,10 @@ Select cIOS slot: 250
 Select cIOS version: 65535
 ```
 
-![Install cIOS 250](/images/cios/d2x_v11_250.png)
+![Instalando cIOS 250](/images/cios/d2x_v11_250.png)
 
-1. Una vez que todas las opciones hayan sido ajustadas correctamente, repite el proceso y presiona A dos veces para comenzar la siguiente instalación.
-1. Cuando la instalación haya finalizado correctamente, vuelve a presionar A para volver al menú anterior y esta vez ajusta otra vez las opciones de la siguiente forma:
+1. Una vez que todas las opciones hayan sido ajustadas correctamente, oprime A dos veces para comenzar la instalación.
+1. Si la instalación ha sido exitosa, presiona A para volver al menú anterior y esta vez ajusta las opciones de la siguiente forma:
 
 ```
 Select cIOS: d2x-v11-beta1
@@ -96,19 +96,19 @@ Select cIOS slot: 251
 Select cIOS version: 65535
 ```
 
-![Install cIOS 251](/images/cios/d2x_v11_251.png)
+![Instalando cIOS 251](/images/cios/d2x_v11_251.png)
 
-1. Once set, press A twice again to install, and then exit once done.
+1. Una vez que todas las opciones hayan sido ajustadas correctamente, oprime A dos veces para comenzar la instalación. Cuando finalice, podrás salir de la aplicación.
 
-#### Troubleshooting
+#### Resolución de problemas
 
 {% capture bruh %}
-Although the majority of games should work straight away with the defaults, some may require using a specific cIOS to function, or to utilize certain features within the game.<br> Examples include:
+Aunque la mayoría de juegos deberian funcionar directamente con la configuracion predeterminada, algunos pueden requerir un cIOS especifico para poder funcionar o utilizar algunas caracterisitcas dentro del juego.<br> Algunos ejemplos incluyen:
 
-- Using a keyboard in Animal Crossing: City Folk.
-- Running SpongeBob's Boating Bash.
+- Usar un teclado en Animal Crossing.
+- Jugar SpongeBob's Boating Bash.
 
-A more comprehensive (although still incomplete) list can be found [**here**](https://wiki.gbatemp.net/wiki/Wii_cIOS_base_Compatibility_List)<br> To change the cIOS used for a specific game, follow these instructions:
+Puedes encontrar una lista de compatibilidad más detallada (aunque incompleta) [**aquí**](https://wiki.gbatemp.net/wiki/Wii_cIOS_base_Compatibility_List).<br> Para cambiar el cIOS usado por un juego en específico, sigue estas instrucciones:
 {% endcapture %}
 
 <div class="notice--warning">{{ bruh | markdownify }}</div>
@@ -117,30 +117,30 @@ A more comprehensive (although still incomplete) list can be found [**here**](ht
 <button class="tablinks btn btn--large btn--info" onclick="openTab(event, 'wiiflow')">WiiFlow</button>
 
 <div id="usbloadergx" class="blanktabcontent" markdown="1">
-1. Select the game that isn't working.
-1. Click Settings.
-1. Select `Game Load`.
-1. Scroll down to `Game IOS`.
-1. Enter the IOS slot to use.
-    - Try using 250 or 251, if 249 doesn't work.
-1. Press OK and try to load the game.
+1. Selecciona el juego que no funciona.
+1. Ve a `Configuración`.
+1. Elige `Configuración del Juego`.
+1. Baja hasta la opción `IOS del Juego`, y ajústala en `Custom`.
+1. Selecciona la opción `Custom Game IOS`.
+    - Ingresa 250 o 251 en caso de que el IOS 249 no haya funcionado.
+1. Guarda los cambios e intenta cargar el juego nuevamente.
 </div>
 <div id="wiiflow" class="blanktabcontent" markdown="1">
-1. Select the game that isn't working.
-1. Click the gear icon.
-1. Go to cIOS and use the arrows to select the IOS slot to use.
-    - Try using 250 or 251, if 249 doesn't work.
-1. Press Save and try to load the game.
+1. Selecciona el juego que no funciona.
+1. Elige la opción con el icono del engranaje.
+1. Dirígete a la opción `cIOS`, y usa las flechas para elegir otro IOS.
+    - Intenta usar el IOS 250 o 251 en caso de que el IOS 249 no haya funcionado.
+1. Guarda los cambios e intenta cargar el juego nuevamente.
 </div>
 ##### Opciones una vez terminado
 
-[Continue to the Homebrew Browser](hbb)<br> The Homebrew Browser is a good place to get homebrew on your Wii. This is optional to install.
+[Continuar a la instalación de Homebrew Browser](hbb)<br> Homebrew Browser te permite descargar diversas aplicaciones homebrew directamente desde tu Wii. Este proceso es opcional.
 {: .notice--info}
 
-[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+[Ir al mapa del sitio](site-navigation)<br> Tenemos muchas otras guías que podrían interesarte.
 {: .notice--info}
 
-You can now use homebrew such as [USB Loader GX](usbloadergx) and [WiiFlow](wiiflow).
+Ahora puedes usar aplicaciones homebrew como [USB Loader GX](usbloadergx) y [WiiFlow](wiiflow).
 {: .notice--info}
 
 <script>
diff --git a/_pages/es_ES/deleting-vffs.md b/_pages/es_ES/deleting-vffs.md
index e70d6c642..4bf683724 100644
--- a/_pages/es_ES/deleting-vffs.md
+++ b/_pages/es_ES/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### Qué necesitas
 
 - Una tarjeta SD o una unidad USB
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instrucciones
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/es_ES/dump-games.md b/_pages/es_ES/dump-games.md
index b3249b80d..8730cff90 100644
--- a/_pages/es_ES/dump-games.md
+++ b/_pages/es_ES/dump-games.md
@@ -18,7 +18,7 @@ title: "Copiar juegos de Wii/GameCube"
 
 #### Instrucciones
 
-##### Sección I - Descarga/instalación
+##### Sección I - Descarga
 
 1. Extrae CleanRip a la carpeta `apps` en tu tarjeta SD o unidad USB.
 1. Inserta la tarjeta SD o unidad USB en tu Wii e inicia CleanRip desde el Canal Homebrew.
@@ -48,7 +48,7 @@ Your Wii and your computer must be connected to one local network.
 
 #### Instrucciones
 
-##### Sección I - Descarga/instalación
+##### Sección I - Descarga
 
 1. Extrae DVD Dump Tool a la carpeta `apps` en tu tarjeta SD o unidad USB.
 1. Inserta la tarjeta SD o unidad USB en tu Wii e inicia DVD Dump Tool desde el Canal Homebrew.
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/es_ES/dump-wads.md b/_pages/es_ES/dump-wads.md
index 7d96ffc46..d48f386db 100644
--- a/_pages/es_ES/dump-wads.md
+++ b/_pages/es_ES/dump-wads.md
@@ -4,31 +4,31 @@ title: "Copiar canales instalados en formato WAD"
 
 {% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado) o [envíanos un correo electrónico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-En esta guía te explicaremos cómo extraer canales instalados en la memoria del sistema en forma de WADs.
+En esta guía aprenderás a extraer canales instalados en la memoria de la consola en forma de archivos WAD.
 
 #### Requisitos
 * Una tarjeta SD o unidad USB
 * [Yet Another BlueDump MOD](https://hbb1.oscwii.org/hbb/Yet-Another-BlueDump-Mod/Yet-Another-BlueDump-Mod.zip)
 
 #### Instrucciones
-##### Sección I - Descarga/instalación
+##### Sección I - Descarga
 
-1. Extract Yet Another BlueDump MOD to your SD card or USB drive.
-2. Inserta la tarjeta SD o unidad USB a tu Wii e inicia Yet Another BlueDump Mod desde el Canal Homebrew.
+1. Extrae Yet Another BlueDump MOD a la raíz de tu tarjeta SD o unidad USB.
+2. Inserta la tarjeta SD o unidad USB en tu Wii, e inicia Yet Another BlueDump MOD desde el Canal Homebrew.
 
 ##### Sección II - Copiando los WADs
-1. Oprime el botón A. ![Oprime A](/images/DumpWADS/2.png)
+1. Oprime el botón A. ![Pantalla de inicio de Yet Another BlueDump MOD](/images/DumpWADS/2.png)
 
-2. Selecciona `Installed Channel Titles`. ![Títulos de Canales Instalados](/images/DumpWADS/3.png)
+2. Selecciona `Installed Channel Titles`. ![Menú principal de Yet Another BlueDump MOD](/images/DumpWADS/3.png)
 
-3. Encuentra el contenido que quieres copiar y oprime el botón 1. ![Encontrar canal](/images/DumpWADS/4.png)
+3. Pulsa arriba o abajo en el botón cruz hasta encontrar el contenido que deseas copiar, y oprime el botón 1.![Lista de canales instalados](/images/DumpWADS/4.png)
 
-4. Selecciona `Backup to WAD`.
-5. Cuando aparezca `Fakesign the ticket`, selecciona `Yes`.
-6. Cuando aparezca `Fakesign the TMD`, selecciona `No`.
-7. En el indicador de `Change the output WAD region`, seleccione `No`.
+4. Elige `Backup to WAD`.
+5. Cuando aparezca `Fakesign the ticket`, selecciona `Yes`, a menos que el canal que deseas copiar haya sido instalado de forma legítima desde el Canal Tienda Wii.
+6. Cuando se muestre `Fakesign the TMD`, elige `No`.
+7. Al aparecer el mensaje `Change the output WAD region`, selecciona `No`.
 
-Ahora ya has copiado el canal en formato WAD. Debería aparecer en tu tarjeta SD o unidad USB. ![Terminado](/images/DumpWADS/5.png)
+Cuando el proceso haya terminado, habrás copiado el canal en formato WAD. Debería aparecer en tu tarjeta SD o unidad USB, en la carpeta `/YABDM/WAD`. ![Archivo WAD generado exitosamente](/images/DumpWADS/5.png)
diff --git a/_pages/es_ES/faq.md b/_pages/es_ES/faq.md
index ac50e3a6a..298a61f33 100644
--- a/_pages/es_ES/faq.md
+++ b/_pages/es_ES/faq.md
@@ -2,31 +2,31 @@
 title: "Preguntas frecuentes"
 ---
 
-![Logotipo de RiiConnect24 amarillo](/images/Wii_Yellow_Gray.jpg)
+![Preguntas frecuentes](/images/Wii_Yellow_Gray.jpg)
 
 ### ¿Qué tan arriesgado es modificar mi consola?
-Bricks (a state where either some parts of your Wii software are not working, or your Wii is not working at all) are extremely rare unless you ignore/circumvent all safety checks, or do something risky or naive like installing an older version of the Wii Menu. Make sure you install [BootMii](bootmii) and [Priiloader](priiloader) to protect yourself from bricks!
+El riesgo de que tu Wii sufra un brick (estado en el cual el software de la consola no puede arrancar debido a un error) es muy bajo, siempre y cuando sigas las instrucciones con atención, y evites hacer modificaciones arriesgadas a tu consola, como instalar una versión anterior del menú de Wii. ¡Asegúrate de instalar [BootMii](bootmii) y [Priiloader](priiloader) para proteger tu consola de un posible brick!
 
 ### ¿En dónde puedo pedir asistencia?
-You can join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net) for assistance.
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 
-### ¿Cuáles son los requerimientos y/o recomendaciones para la tarjeta SD?
+### ¿Cuál es la capacidad recomendada para la tarjeta SD?
 Necesitarás una tarjeta SD de al menos 128 MB para ejecutar un exploit.
 
-- If you are using the BlueBomb, str2hax, or FlashHax exploits, you do not need an SD card.
+- Si vas a utilizar BlueBomb, str2hax, o FlashHax, no necesitarás una tarjeta SD.
 
-Para almacenar aplicaciones Homebrew, recomendamos usar una tarjeta SD de por lo menos 2 GB de capacidad.
+Para almacenar aplicaciones homebrew, se recomienda usar una tarjeta SD de por lo menos 2 GB de capacidad.
 
-### I got error code XXXXXX in Wiimmfi, how to fix it?
-In order to check what the reason for the error is, please visit the [Wiimmfi error page](https://wiimmfi.de/error).
+### He recibido el código de error XXXXX en Wiimmfi, ¿cómo lo soluciono?
+Para saber la causa del error y su posible solución, accede a la [página de errores de Wiimmfi](https://wiimmfi.de/error), e ingresa el código que hayas recibido.
 
-### ¿Cuáles son las modificaciones/instalaciones que dejarían a tu vWii en un brick?
-La siguiente es una lista de acciones que pueden dejar tu vWii en un estado de **brick** (¡No intentes estas cosas!):
-* Instalar IOS diseñados para el Wii en vWii.
-* Instalar temas diseñados para el Wii que no han sido convertidos correctamente para el vWii y/o la región de tu consola.
-* Instalar BootMii y/o Priiloader/Preloader.
+### ¿Cuáles son las modificaciones que pueden causar un brick del modo Wii (vWii) en la Wii U?
+A continuación se enlistan algunas acciones que pueden dejar tu vWii en un estado de **brick**. ¡Por favor no intentes estas cosas!
+* Instalar IOS diseñados para la Wii original.
+* Instalar temas para el menú de Wii que no hayan sido convertidos correctamente para vWii y/o la región de tu consola.
+* Instalar BootMii o Priiloader/Preloader.
 * Fallo durante la instalación de títulos o IOS cruciales del sistema (por ejemplo, debido a un apagón).
-* Modificar la NAND del vWii sin saber lo que estás haciendo.
+* Modificar, mover, o eliminar archivos del sistema sin saber lo que estás haciendo.
 
-### How can I remove parental controls?
-The [mkey generator](https://mkey.salthax.org) can generate the code required to remove parental controls.
+### ¿Cómo puedo eliminar el control parental?
+Puedes usar la página [mkey generator](https://mkey.salthax.org) para obtener el código necesario para remover el control parental.
diff --git a/_pages/es_ES/flashhax.md b/_pages/es_ES/flashhax.md
index d48865df6..df60d9666 100644
--- a/_pages/es_ES/flashhax.md
+++ b/_pages/es_ES/flashhax.md
@@ -2,25 +2,25 @@
 title: "FlashHax"
 ---
 
-Si necesitas ayuda para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado) o [envíanos un correo electrónico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-FlashHax es un exploit para el Wii que se activa con el uso del Canal de Internet. A diferencia de otros exploits, éste no requiere una tarjeta SD.
+FlashHax es un exploit para la Wii original que se activa mediante el Canal Internet. A diferencia de otros exploits, este no requiere una tarjeta SD.
 
 #### Requisitos
 
-- Un Wii con conexión a Internet
-- El Canal Internet
+- Una Wii con conexión a internet
+- Canal Internet
 
 #### Instrucciones
 
 1. Inicia el Canal Internet en tu Wii.
-2. Ve a flashhax.com en el navegador y agrega la página a favoritos.
-3. Abre la página desde favoritos. Comenzará a descargar y a cargar el HackMii Installer. It may take some time as it is downloading the installer over the Internet.
+2. Ingresa a flashhax.com en el navegador y agrega la página a favoritos.
+3. Abre la página desde el menú de favoritos. A continuación comenzará a descargarse HackMii Installer y se iniciará automáticamente en cuanto haya terminado. El tiempo de descarga puede variar dependiendo de la velocidad de tu conexión a internet.
 
-Si el HackMii Installer no se carga y la consola se congela (si no puedes mover el cursor), por favor reinicia tu consola y repite el paso 3 hasta que funcione. Esto puede tomar varios intentos, ¡se persistente!
+Si HackMii Installer no carga y el sistema se congela (si no puedes mover el cursor), por favor reinicia tu consola y repite el paso 3 hasta que funcione. Esto puede tomar varios intentos, por favor ten paciencia.
 
-If you still can't get it to load, try deleting your cookies or save data for the Internet Channel.
+Si después de varios intentos no consigues ejecutar el exploit, intenta eliminar las cookies o los datos de guardado del Canal Internet.
 
 [Continuar a la instalación del Canal Homebrew y BootMii](hbc)
 {: .notice--info}
diff --git a/_pages/es_ES/get-started.md b/_pages/es_ES/get-started.md
index 935442c58..1e383ad9d 100644
--- a/_pages/es_ES/get-started.md
+++ b/_pages/es_ES/get-started.md
@@ -1,10 +1,10 @@
 ---
-title: "Prepárate"
+title: "Primeros pasos"
 ---
 
-{% include toc title="Tabla de contenidos" %}
+{% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado) o [envíanos un correo electrónico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
 Even if your Wii has already been softmodded in the past, following these steps can still ensure that your softmod is up to date.
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/es_ES/hbc-mini.md b/_pages/es_ES/hbc-mini.md
index 57d729136..94d5b919e 100644
--- a/_pages/es_ES/hbc-mini.md
+++ b/_pages/es_ES/hbc-mini.md
@@ -1,28 +1,28 @@
 ---
-title: "Instalar Canal Homebrew para Wii Mini"
+title: "Instalar el Canal Homebrew (para Wii mini)"
 ---
 
 {% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado) o [envíanos un correo electrónico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
 ![Logotipo del Canal Homebrew](/images/hbc.png)
 
-El Canal Homebrew es desde donde iniciarás las aplicaciones homebrew.
+El Canal Homebrew te permite utilizar las aplicaciones homebrew que descargues.
 
 #### Instrucciones
-Esta guía es **sólo** para usuarios de Wii Mini. Si tienes un Wii original, por favor sigue [esta guía](hbc).
+Esta guía es **solo** para usuarios de Wii mini. Si tienes una Wii original, por favor sigue [esta guía](hbc).
 {: .notice--info}
 
-While it is possible to install BootMii on a Wii mini, you will need to solder an SD card slot. That requires opening up your Wii mini and using special tools, so it is not recommended.
+También es posible instalar BootMii en la Wii mini, aunque necesitarás soldar una ranura para tarjetas SD. Esto requiere desarmar tu consola y usar equipo especial, por lo que no es recomendable.
 {: .notice--info}
 
-1. Verás una pantalla de advertencia contra estafa. Espera 30 segundos hasta que aparezca el texto "Press 1 to continue", y después oprime el botón 1. ![Pantalla de advertencia contra estafa](/images/hackmii/scam.png)
+1. Deberías ver una pantalla de advertencia contra estafa. Espera 30 segundos hasta que aparezca el texto `Press 1 to continue`, y después oprime el botón 1. ![Pantalla de advertencia contra estafa](/images/hackmii/scam.png)
 
-1. Press `Continue`, then select `Install The Homebrew Channel`. ![Homebrew Channel installation](/images/hackmii/hbc_install.png) ![Homebrew Channel installation OK](/images/hackmii/hbc_install_ok.png)
-1. Press `Continue` when finished.
-1. Once done, select `Exit` to exit the HackMii installer.
+1. Selecciona `Continue`, después dirígete a `Install The Homebrew Channel`. ![Canal Homebrew instalado exitosamente](/images/hackmii/hbc_install.png) ![Menú principal de HackMii Installer](/images/hackmii/hbc_install_ok.png)
+1. Elige `Continue` cuando el proceso haya finalizado.
+1. Finalmente, selecciona `Exit` para salir de HackMii Installer.
 
-[Continue to installing Priiloader](priiloader) <br> Priiloader offers protection from bricks, and is highly recommended to install.
+[Continuar a la instalación de Priiloader](priiloader)<br> Priiloader ofrece protección contra bricks, por lo que se recomienda su instalación.
 {: .notice--info}
diff --git a/_pages/es_ES/home.md b/_pages/es_ES/home.md
index 823651b55..3b73b4ab2 100644
--- a/_pages/es_ES/home.md
+++ b/_pages/es_ES/home.md
@@ -1,6 +1,6 @@
 ---
 layout: splash
-title: "Guía Wii"
+title: "Wii Guide"
 header:
   overlay_color: "#5e616c"
   overlay_image: /images/home-page-feature.jpg
@@ -9,32 +9,32 @@ header:
 excerpt: "La guía completa para modificar tu consola Nintendo Wii."
 ---
 
-Esta guía también está disponible en otros idiomas. Para ver la página en otro idioma, por favor presiona el icono en la esquina superior derecha y elige un idioma.
+Esta página está disponible en varios idiomas. Para cambiar de idioma, haz clic en el icono de la esquina superior derecha.
 {: .notice--info}
 
-## ¿Qué es “homebrew”?
+## ¿Qué es "homebrew"?
 
-[**Homebrew**](https://en.wikipedia.org/wiki/Homebrew_(video_games)) se refiere a software no autorizado por Nintendo. ¡Esto incluye juegos, utilidades, emuladores y mucho más!
+[**Homebrew**](https://es.wikipedia.org/wiki/Homebrew) se refiere a software no autorizado por Nintendo. ¡Esto incluye juegos, herramientas, emuladores y mucho más!
 
-Ejecutar homebrew en tu Nintendo Wii puede hacerse gratuitamente aprovechando bugs en el software de Wii. Las modificaciones instaladas por seguir esta guía te dará acceso fácil y persistente a Homebrew de Wii.
+Ejecutar homebrew en la Nintendo Wii puede hacerse de forma gratuita, aprovechando diversas vulnerabilidades en el software de la consola. Las modificaciones que instales en tu consola al seguir esta guía te darán acceso fácil y permanente a homebrew.
 
 ## ¿Qué puedo hacer con homebrew?
 
-Aquí una lista de lo que puedes hacer con Homebrew. Dado a que esta lista no quiere decir que todo sea comprensible, deberás tener una buena idea de lo que es si es posible, y la guía te ayudará a comenzar fácilmente.
+Hay muchas cosas que puedes hacer con homebrew. A continuación se enlistan algunos de los usos más populares:
 
-- Parchear contenido de juegos físicos (permitiéndote así cargar modificaciones personalizadas) usando [Riivolution](http://www.wiibrew.org/wiki/Riivolution).
-- Instalar temas a tu Menú de Wii usando [MyMenuify](themes).
-- Instalar un USB Loader como [WiiFlow](wiiflow) o [USB Loader GX](usbloadergx) para ejecutar tus títulos favoritos desde un dispositivo USB y más.
-- Haga una copia de seguridad de sus discos con [CleanRip](/dump-games) y juegos instalados y títulos con [YABDM](dump-wads)
-- Respaldar y restaurar tus datos de guardado con [SaveGame Manager GX](https://wiidatabase.de/downloads/wii-tools/savegame-manager-gx-beta/)
-- Descargar nueva aplicaciones de Homebrew con el [Homebrew Browser](hbb)
-- Restaurar servicios en línea descontinuados, como [WiiConnect24](riiconnect24) & [Nintendo WFC services](wiimmfi).
-- Respaldar y restaurar copias de la memoria de tu Wii (NAND) usando [BootMii](bootmii).
-- Protege tu Wii de bricks usando [Priiloader](priiloader) y BootMii.
-- Turn your Wii into a media player with [WiiMC](https://oscwii.org/library/app/wiimc-ss).
+- Parchear contenido de juegos físicos para cargar modificaciones personalizadas, usando [Riivolution](http://www.wiibrew.org/wiki/Riivolution).
+- Cambiar el aspecto del menú de Wii, usando [MyMenuify](themes).
+- Cargar copias de juegos físicos desde una tarjeta SD o unidad USB, con [USB Loader GX](usbloadergx) o [WiiFlow](wiiflow).
+- Crear copias digitales de juegos físicos y canales instalados, con [CleanRip](/dump-games) y [YABDM](dump-wads), respectivamente.
+- Respaldar y restaurar tus partidas guardadas, con [SaveGame Manager GX](https://wiidatabase.de/downloads/wii-tools/savegame-manager-gx-beta/).
+- Descargar aplicaciones homebrew directamente desde tu consola, con [Homebrew Browser](hbb).
+- Volver a utilizar el servicio [WiiConnect24](riiconnect24), y la [CWF de Nintendo](wiimmfi).
+- Respaldar y restaurar los contenidos de la memoria de la consola (NAND), usando [BootMii](bootmii).
+- Proteger tu consola de un brick, con [Priiloader](priiloader) y BootMii.
+- Convertir tu Wii en un reproductor multimedia, con [WiiMC](https://oscwii.org/library/app/wiimc-ss).
 
 
-## Ready?
+## ¿Estás listo?
 
-Comienza por [elegir un exploit](get-started)!
+Comienza por [elegir un exploit](get-started).
 {: .notice--info}
diff --git a/_pages/es_ES/modmii.md b/_pages/es_ES/modmii.md
new file mode 100644
index 000000000..ede040032
--- /dev/null
+++ b/_pages/es_ES/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Tabla de contenido" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### Requisitos
+
+* Una consola Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Descripción                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Descripción                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/es_ES/priiloader.md b/_pages/es_ES/priiloader.md
index 8ece26a9e..fc32a3ca5 100644
--- a/_pages/es_ES/priiloader.md
+++ b/_pages/es_ES/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### Requisitos
 
 - Una tarjeta SD o unidad USB
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instrucciones
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/es_ES/riiconnect24-dns-update.md b/_pages/es_ES/riiconnect24-dns-update.md
index ae7a32a86..50fac9300 100644
--- a/_pages/es_ES/riiconnect24-dns-update.md
+++ b/_pages/es_ES/riiconnect24-dns-update.md
@@ -1,30 +1,30 @@
 ---
-title: "RiiConnect24 DNS Update"
+title: "Actualización del DNS de RiiConnect24"
 ---
 
-If you need help with anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-![RiiConnect24 Logo](/images/logo_blue_warning.png)
+![Logotipo de RiiConnect24](/images/logo_blue_warning.png)
 
-Our official DNS Address has been updated. We require all users to change it. Failure in doing so will result in losing access to most or every RiiConnect24 service.
+La direccion de nuestro servidor DNS ha sido actualizada. Se requiere que todos los usuarios de RiiConnect24 actualicen su configuración DNS. De no hacerlo, perderás acceso a la mayoría de los servicios de RiiConnect24.
 
-Our old DNS Server has been deprecated as of `June 1st, 2023` and is no longer available to use.
+Nuestro servidor DNS antiguo (`164.132.44.106`) ha sido descontinuado a partir del `1 de junio de 2023` y ya no puede ser utilizado.
 {: .notice--warning}
 
-RiiConnect24 functionality will be limited until you update the DNS setting on your Wii.
+La funcionalidad de RiiConnect24 será limitada hasta que actualices la configuración DNS de tu consola.
 
-To update your entered DNS Address please follow these steps:
+Para actualizar la dirección DNS, sigue los siguientes pasos:
 
 1. Selecciona `Opciones de Wii` en el menú de Wii.
-2. Selecciona `Configuración de Wii`.
+2. Elige `Configuración de Wii`.
 3. Pasa a la segunda página y después selecciona `Internet`.
-4. Go to `Connection Settings`
-5. Select your current connection
-6. Go to `Change Settings`
-7. Pasa hasta la cuarta página, donde está la opción `Obtener DNS automáticamente` (no es en Obtener drección IP automáticamente), elige `No` y después selecciona `Configuración avanzada`.
-8. Type in `167.86.108.126` as the primary DNS
-9. Type in `1.1.1.1` as the secondary DNS
-10. Select `Confirm`, then select `Save`
-11. Select `OK` to perform a connection
-12. Si la prueba de conexión ha sido exitosa, elige `No` para saltar la actualización de la consola Wii.
+4. Ingresa a `Ajustes de conexión`.
+5. Selecciona tu conexión actual.
+6. Elige `Modificar`.
+7. Pasa hasta la cuarta página, donde está la opción `Obtener DNS automáticamente` (no es en `Obtener dirección IP automáticamente`), elige `No` y después selecciona `Configuración avanzada`.
+8. Ingresa `167.86.108.126` en `DNS primario`.
+9. Escribe `1.1.1.1` en `DNS secundario<code>.</li>
+<li>Selecciona <code>Confirmar` y finalmente `Guardar`.
+11. Elige `Aceptar` para realizar una prueba de conexión.
+12. Si la prueba de conexión ha sido exitosa, selecciona `No` para saltar la actualización de la consola Wii.
diff --git a/_pages/es_ES/riiconnect24-dolphin.md b/_pages/es_ES/riiconnect24-dolphin.md
index 0223bcaf4..d77ff2aa2 100644
--- a/_pages/es_ES/riiconnect24-dolphin.md
+++ b/_pages/es_ES/riiconnect24-dolphin.md
@@ -59,7 +59,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
 8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
 9. Press `1` then `ENTER` to start patching.
 10. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![Si el proceso ha sido exitoso,](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 12. In Dolphin, go to `Tools` and then `Install WAD`. Install all the WAD files one by one.
 13. Unzip [AnyGlobe Changer v1.0](https://github.com/fishguy6564/AnyGlobe-Changer/releases/download/1.0/AnyGlobe.Changer.zip) and run the boot.dol file. Select your region and save. This will allow the Everybody Votes Channel to work.
 
diff --git a/_pages/es_ES/riiconnect24-vwii.md b/_pages/es_ES/riiconnect24-vwii.md
index 0bafc9260..baff56646 100644
--- a/_pages/es_ES/riiconnect24-vwii.md
+++ b/_pages/es_ES/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### Requisitos
 
-* Una tarjeta SD o unidad USB
-* Una computadora
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- Una tarjeta SD o unidad USB
+- Una computadora
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![Si el proceso ha sido exitoso,](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### Servicios soportados
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/es_ES/riiconnect24.md b/_pages/es_ES/riiconnect24.md
index 62970eaf7..8b66ea150 100644
--- a/_pages/es_ES/riiconnect24.md
+++ b/_pages/es_ES/riiconnect24.md
@@ -52,7 +52,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![Si el proceso ha sido exitoso,](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
diff --git a/_pages/es_ES/riitag.md b/_pages/es_ES/riitag.md
index 9debf021f..abab01eb9 100644
--- a/_pages/es_ES/riitag.md
+++ b/_pages/es_ES/riitag.md
@@ -49,7 +49,7 @@ Los pasos para conectar el RiiTag a su Cargador USB dependen del Cargador USB qu
 ###### WiiFlow
 
 1. Inserta en tu computadora la tarjeta SD o unidad USB donde tengas guardada la configuración de WiiFlow.
-2. Abre el archivo `wiiflow.ini` ubicado en `/apps/wiiflow/` con un editor de texto. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Busca `gamercards` y reemplaza esa línea con `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Busca `wiinnertag_key` y reemplaza esa línea con `wiinnertag_key=<key>`, reemplazando `<key>` con la clave que apuntaste en la sección I.
diff --git a/_pages/es_ES/rssmii-remove.md b/_pages/es_ES/rssmii-remove.md
index ce5ac5d30..97ada5002 100644
--- a/_pages/es_ES/rssmii-remove.md
+++ b/_pages/es_ES/rssmii-remove.md
@@ -2,12 +2,12 @@
 title: "Desinstalar RSSMii"
 ---
 
-Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras [el servidor Discord de RiiConnect24](https://discord.gg/rc24) (recomendado) o [envias un correo electronico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
 Si ya no deseas usar RSSMii (por ejemplo, si recibes muchos mensajes en tu tablón de Wii), a continuación te explicaremos cómo desinstalarlo.
 
-![Desinstalando RSSMii](/images/rssmii-remove.png)
+![Icono de RSSMii Remover](/images/rssmii-remove.png)
 
 #### Requisitos
 
@@ -16,9 +16,9 @@ Si ya no deseas usar RSSMii (por ejemplo, si recibes muchos mensajes en tu tabl
 
 #### Instrucciones
 
-1. Extrae RSS Remover a la carpeta `apps` en tu tarjeta SD o unidad USB.
-2. Elimina el archivo `feeds.xml` que se encuentra en la raíz de la tarjeta SD.
+1. Extrae el archivo de RSSMii Remover a la carpeta `apps` en tu tarjeta SD.
+2. Elimina el archivo `feeds.xml` ubicado en la raíz de la tarjeta SD.
 3. Inicia RSSMii Remover desde el Canal Homebrew. Esto borrará tus suscripciones a las fuentes RSS.
 
-En caso de que alguna vez quieras revertir tu decisión, siempre puedes [reinstalar RSSMii](rssmii).
+En caso de que decidas revertir tu decisión, siempre puedes volver a [instalar RSSMii](rssmii).
 {: .notice--info}
diff --git a/_pages/es_ES/rssmii.md b/_pages/es_ES/rssmii.md
index 3ce50ffea..83b97c312 100644
--- a/_pages/es_ES/rssmii.md
+++ b/_pages/es_ES/rssmii.md
@@ -4,10 +4,10 @@ title: "Instalar RSSMii"
 
 {% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras [el servidor Discord de RiiConnect24](https://discord.gg/rc24) (recomendado) o [envias un correo electronico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-¿Te gustaría recibir actualizaciones RSS en tu tablón de Wii? En esta guía te explicaremos cómo instalar RSSMii.
+Con esta guía aprenderás a instalar RSSMii, una herramienta que te permite recibir actualizaciones de fuentes RSS en el tablón de Wii.
 
 ![RSSMii](/images/rssmii.png)
 
@@ -19,23 +19,23 @@ Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras [el ser
 #### Instrucciones
 ##### Sección I - Descarga/instalación
 
-1. Extrae RSSMii a la carpeta `apps` en tu tarjeta SD o unidad USB.
-2. Ahora necesitas crear un archivo llamado `feeds.xml` en la raíz de la tarjeta SD, para que de esta forma RSSMii pueda saber a qué fuentes quieres suscribirte.
+1. Extrae el archivo de RSSMii a la carpeta `apps` en tu tarjeta SD.
+2. Crea un archivo llamado `feeds.xml` en la raíz de la tarjeta SD, para que de esta forma RSSMii pueda saber a qué fuentes deseas suscribirte.
 
-Si usas el Sistema Operativo Windows, puedes usar el [RSS Feeds Creator](https://github.com/RiiConnect24/rssmii/releases/download/v1.4.1/RSSFeedsCreator.bat), programa creado por KcrPL. El programa se encargará de crear el archivo `feeds.xml` y de copiarlo a tu tarjeta SD automáticamente
+Si tu PC ejecuta Windows, puedes usar [RSS Feeds Creator](https://github.com/RiiConnect24/rssmii/releases/download/v1.4.1/RSSFeedsCreator.bat), un programa creado por KcrPL que se encargará de generar el archivo `feeds.xml` y copiarlo a la tarjeta SD automáticamente.
 {: .notice--info}
 
-<b>Si no tienes una computadora con Windows, puedes copiar el siguiente ejemplo y usar un editor de texto para crear el archivo `feeds.xml`.</b>
+<b>Si no tienes una PC con Windows, puedes copiar el siguiente ejemplo y usar un editor de texto para crear el archivo <code>feeds.xml</code>:</b>
 
 ```xml
 <?xml version="1.0" encoding="utf-8"?>
 <rss>
-  <feed name="Fuente de ejemplo"><![CDATA[http://example.com/rss-feed]]></feed>
-  <feed name="Otra fuente de ejemplo"><![CDATA[http://example.com/another_rss-feed]]></feed>
+  <feed name="Example-Feed"><![CDATA[http://example.com/rss-feed]]></feed>
+  <feed name="One more Example-Feed!"><![CDATA[http://example.com/another_rss-feed]]></feed>
 </rss>
 ```
 
-Reemplaza el nombre con el título que quieras poner a la fuente. Asegúrate de que no sea muy largo, ya que el límite de caracteres es reducido. Después, reemplaza el enlace de ejemplo con el enlace de la fuente RSS. Puedes añadir tantas fuentes como quieras. No borres la parte que dice "CDATA".
+Reemplaza el nombre con el título que quieras poner a la fuente. Asegúrate de que no sea muy largo, ya que el límite de caracteres es reducido. Después, reemplaza el enlace de ejemplo con el enlace de la fuente RSS. Puedes añadir tantas fuentes como desees. No borres la parte que dice `CDATA`.
 
 ```xml
 <?xml version="1.0" encoding="utf-8"?>
@@ -47,16 +47,16 @@ Reemplaza el nombre con el título que quieras poner a la fuente. Asegúrate de
 
 Guarda los cambios que hayas hecho al archivo.
 3. Inicia RSSMii desde el Canal Homebrew.
-4. Oprime A para confirmar que quieres suscribirte a las fuentes. Ignora el error que dice `ES_GetTitleID`, todo está bien.
-5. Una vez que el proceso haya terminado, oprime el botón HOME para volver al Canal Homebrew. ¡Pronto deberías comenzar a recibir actualizaciones RSS en tu tablón de Wii!
+4. Oprime A para confirmar tu suscripción a las fuentes. Ignora el error que dice `ES_GetTitleID`.
+5. Cuando el proceso haya finalizado, oprime HOME para volver al Canal Homebrew. ¡Pronto deberías comenzar a recibir actualizaciones RSS en tu tablón de Wii!
 
-¿No has recibido actualizaciones de ninguna fuente? Intenta suscribirte a una fuente que se actualice más a menudo, como por ejemplo, una fuente RSS de noticias. Si la fuente no se actualiza periódicamente, entonces no recibirás muchas actualizaciones.
+Si no has recibido actualizaciones de ninguna fuente después de un rato, intenta suscribirte a una que se actualice más a menudo, como por ejemplo, una fuente de noticias. Si la fuente no se actualiza periódicamente, entonces no recibirás muchas actualizaciones.
 {: .notice--warning}
 
-Te recomendamos que sólo te suscribas a unas pocas fuentes, ya que si te suscribes a muchas, podrías recibir demasiados mensajes en el tablón de Wii.
+Te recomendamos no suscribirte a demasiadas fuentes, ya que podrías recibir muchos mensajes en el tablón de Wii.
 {: .notice--info}
 
-Si no empiezas a recibir actualizaciones al cabo de unos días, entonces tal vez tengas que volver a suscribirte a las fuentes RSS. Para hacer esto sólo tienes que volver a ejecutar RSSMii y la aplicación se encargará de crear nuevas suscripciones.
+En caso de no comenzar a recibir actualizaciones al cabo de unos días, intenta volver a suscribirte a las fuentes RSS. Para ello, solo debes ejecutar RSSMii nuevamente desde el Canal Homebrew.
 {: .notice--info}
 
 [Desinstalar RSSMii](rssmii-remove)
diff --git a/_pages/es_ES/site-navigation.md b/_pages/es_ES/site-navigation.md
index fff6244e9..46fcdc609 100644
--- a/_pages/es_ES/site-navigation.md
+++ b/_pages/es_ES/site-navigation.md
@@ -23,12 +23,12 @@ sitemap: false
 - [Instalar RiiConnect24](riiconnect24)
 - [RiiXOnnect24 para vWii](riiconnect24-vwii)
 - [RiiConnect24 para Dolphin](riiconnect24-dolphin)
-- [RiiConnect24 DNS Update](riiconnect24-dns-update)
+- [Actualización del DNS de RiiConnect24](riiconnect24-dns-update)
 - [WiiLink](wiilink)
 - [WiiLink Demae Domino's](wiilink-demae-dominos)
 - [Wiimmfi](wiimmfi)
 - [Kirby TV Channel](kirby-tv)
-- [WiiWare Patcher](wiiwarepatcher)
+- [Parche de Wiimmfi para WiiWare](wiiwarepatcher)
 - [Deleting VFFs](deleting-vffs)
 - [Fixing FORE000006](riiconnect24-batteryfix)
 - [Fixing NEWS000006](news000006)
@@ -36,13 +36,14 @@ sitemap: false
 **Modificación 101**
 
 - [BlueBomb](bluebomb)
-- [Crear copia de seguridad de NAND con BootMii](bootmii)
+- [Crear respaldo de NAND con BootMii](bootmii)
 - [Instalar cIOS d2x](cios)
 - [Dos and Don'ts of Wii Modding](dosanddonts)
 - [FlashHax](flashhax)
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Desinstalar RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [Instalar RiiTag en Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/es_ES/themes-vwii.md b/_pages/es_ES/themes-vwii.md
index c14d82319..4f96a8980 100644
--- a/_pages/es_ES/themes-vwii.md
+++ b/_pages/es_ES/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
@@ -111,7 +113,7 @@ If you did everything correctly, you should now have your custom theme installed
 
 ##### Reverting to Original Theme
 
-1. Launch the Homebrew Channel.
+1. Inicia el Canal Homebrew.
 2. Launch MyMenuify and navigate to your theme folder.
 3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
 4. Select Install and wait until it finishes.
diff --git a/_pages/es_ES/themes.md b/_pages/es_ES/themes.md
index 7f24df0f8..08e704761 100644
--- a/_pages/es_ES/themes.md
+++ b/_pages/es_ES/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 ¡ASEGURATE DE QUE HAS LEIDO TODAS LAS ADVERTENCIAS ANTES DE CONTINUAR!
@@ -77,5 +79,5 @@ Below are some links to themes.
 5. Después de un mensaje de introducción, te preguntará qué IOS quieres usar en la aplicación. Si tienes [cIOS instalado](cios), usar `IOS249`, si no, usar `IOS58`. Si después de elegir el primero, te aparece un error que dice `Exception DSI occurred!`, oprime el botón RESET en la consola, inicia la aplicación de nuevo e intenta usar el `IOS250`. It might take a couple attempts to reload the IOS.
 6. Selecciona el tema que quieras instalar y después oprime A. Espera un momento para que se instale el tema, después oprime cualquier botón para volver al menú de Wii. Esperamos que el tema se haya instalado correctamente.
 
-If you get an error saying "The system files are corrupted" or a black screen, don't panic as long as you installed Priiloader. Turn off your Wii, then hold down the RESET button down and turn on your Wii. El menú de Priiloader debería de iniciarse. Desde aquí tienes algunas opciones para reparar tu menú de Wii. One of the options is to launch the Homebrew Channel, where you can launch MyMenuify Mod and press a button to download and install the original Wii Menu theme.
+If you get an error saying "The system files are corrupted" or a black screen, don't panic as long as you installed Priiloader. Para solucionar esto, apaga la consola, después oprime el botón POWER mientras mantienes pulsado RESET. El menú de Priiloader debería iniciarse. Desde aquí puedes iniciar el Canal Homebrew, y posteriormente cargar alguna aplicación que te ayude a reparar el brick. La solución más rápida es desinstalar el acceso directo causante del problema con un gestor de WADs. One of the options is to launch the Homebrew Channel, where you can launch MyMenuify Mod and press a button to download and install the original Wii Menu theme.
 {: .notice--info}
diff --git a/_pages/es_ES/update.md b/_pages/es_ES/update.md
index 89c97c1c6..4f74ef043 100644
--- a/_pages/es_ES/update.md
+++ b/_pages/es_ES/update.md
@@ -49,7 +49,7 @@ To protect against bricks, [make sure you install Priiloader](priiloader). Also,
 
 ##### Sección II - Instalación
 
-En esta aplicación usarás la cruz de control para desplazarte por las opciones.
+En esta aplicación usarás el botón cruz para desplazarte por las opciones.
 {: .notice--info}
 
 1. Put your SD card or USB drive in your Wii.
diff --git a/_pages/es_ES/wiigsc.md b/_pages/es_ES/wiigsc.md
index 42a59a6b0..7d77a3a6b 100644
--- a/_pages/es_ES/wiigsc.md
+++ b/_pages/es_ES/wiigsc.md
@@ -4,31 +4,31 @@ title: "Crear accesos directos para juegos de Wii"
 
 {% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras [el servidor Discord de RiiConnect24](https://discord.gg/rc24) (recomendado) o [envias un correo electronico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-¿Usas un USB loader y te gustaría crear accesos directos a tus juegos para poder iniciarlos desde el menú de Wii? Entonces prueba WiiGSC (Wii Game Shortcut Creator), anteriormente conocido como Crap.
+En esta guía aprenderás a crear accesos directos para juegos de Wii almacenados en una unidad USB, usando el programa WiiGSC (anteriormente conocido como Crap). Esto es de utilidad si usas un USB loader y deseas ahorrar tiempo al momento de cargar tus juegos.
 
-En caso de un brick, para repararlo es necesario tener instalado [Priiloader](/priiloader). También es recomendable instalar BootMii (si es posible, como boot2). Tener algún tipo de protección contra bricks instalada junto con seguir la guía de forma correcta te mantendrá protegido contra bricks. ¡NO CONTINÚES SI NO TIENES PRIILOADER Y BOOTMII INSTALADOS!
+En caso de un brick, es fundamental tener instalado [Priiloader](/priiloader) para poder repararlo. También es recomendable instalar BootMii (si es posible, como boot2). Si cuentas con dichos requisitos y sigues los pasos de forma correcta, tu consola estará a salvo de un brick. ¡NO CONTINÚES SI NO TIENES PRIILOADER Y BOOTMII INSTALADOS!
 {: .notice--warning}
 
-NO hagas un atajo para los juegos "Mario Party 9" o "A Boy and His Blob". Brickearas tu Wii.
+NO intentes crear un atajo para los juegos Mario Party 9, o A Boy and His Blob. Si instalas alguno de estos atajos, tu consola sufrirá un brick.
 {: .notice--warning}
 
 #### Requisitos
 
-* Un Wii
-* Una unidad USB.
-* Un instalador de WADs (se recomienda Wii Mod Lite).
-* Una computadora con Windows.
+* Una Wii
+* Una unidad USB
+* Un gestor de WADs (se recomienda Wii Mod Lite)
+* Una PC con Windows
 * [WiiGSC](https://wiidatabase.de/downloads/pc-tools/wiigsc-ehemals-crap/)
 
 #### Instrucciones
 
-1. Instalar WiiGSC, luego haga clic derecho sombre él y seleccione **Run as administrator**. Si no haces esto, WiiGSC da un error cuando lo abres.
-2. Seleccione la carpeta al archivo ISO o WBFS en su unidad USB y seleccione el cargador USB que usa. No hace falta que cambies el resto de las opciones.
-3. If you're using USB Loader GX, make sure to use [this version](https://hbb1.oscwii.org/hbb/usbloader_gx/usbloader_gx.zip).
-4. Instala el WAD generado con un instalador de WADs, recomendamos usar Wii Mod Lite.
+1. Descarga WiiGSC desde el enlace de arriba y extrae el archivo, luego ejecuta el instalador. Una vez que el programa se haya instalado, haz clic derecho sobre su icono en el escritorio, y selecciona **Ejecutar como administrador**. Si no haces esto, WiiGSC dará un error cuando se inicie.
+2. Haz clic en el botón `...` que está a la derecha de `ISO/WBFS File` y selecciona el archivo ISO o WBFS ubicado en tu unidad USB. Después haz clic en el botón a la derecha de `Loader` y elige el USB loader que usas. No hace falta que cambies el resto de las opciones. Repite el proceso con cada juego para el cual desees crear un atajo.
+3. Si utilizas USB Loader GX, asegúrate de tener [esta versión](https://hbb1.oscwii.org/hbb/usbloader_gx/usbloader_gx.zip).
+4. Cuando el proceso haya finalizado, instala el archivo WAD generado por el programa con un gestor de WADs. Se recomienda usar Wii Mod Lite.
 
-Si te aparece un mensaje que dice "Los archivos del sistema están dañados", no tienes nada de que preocuparte siempre y cuando hayas instalado Priiloader. Turn off your Wii, then hold down the RESET button down and turn on your Wii. El menú de Priiloader debería de iniciarse. Desde aquí tienes algunas opciones para reparar tu menú de Wii. Una de las opciones es iniciar el Canal Homebrew.
+Si tras instalar el WAD y volver al menú de Wii aparece el mensaje `Los archivos del sistema están dañados`, no tienes nada de que preocuparte, siempre y cuando hayas instalado Priiloader o BootMii como boot2. Para solucionar esto, apaga la consola, después oprime el botón POWER mientras mantienes pulsado RESET. El menú de Priiloader debería iniciarse. Desde aquí puedes iniciar el Canal Homebrew, y posteriormente cargar alguna aplicación que te ayude a reparar el brick. La solución más rápida es desinstalar el acceso directo causante del problema con un gestor de WADs. Si tu consola solo cuenta con BootMii instalado como boot2, este debería iniciarse automáticamente al encender la Wii, tras lo cual puedes lanzar el Canal Homebrew y llevar a cabo la sugerencia anterior.
 {: .notice--info}
diff --git a/_pages/es_ES/wiilink.md b/_pages/es_ES/wiilink.md
index 24644ade6..660d7f026 100644
--- a/_pages/es_ES/wiilink.md
+++ b/_pages/es_ES/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - Una tarjeta SD o unidad USB
 - Un Wii con conexión a Internet
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instrucciones
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Inicia el Canal Homebrew en tu Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Inicia el Canal Homebrew en tu Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/es_ES/wiimmfi.md b/_pages/es_ES/wiimmfi.md
index e11d49e19..fa33581a9 100644
--- a/_pages/es_ES/wiimmfi.md
+++ b/_pages/es_ES/wiimmfi.md
@@ -45,7 +45,7 @@ Si has usado una unidad USB para instalar Priiloader, asegúrate de que no tiene
 1. Pulsa abajo hasta llegar a `System Menu` y pulsa A para salir al menú de Wii.
 1. Inicia tu juego desde el Canal Disco. Ahora deberías poder acceder a Wiimmfi.
 
-Si el nombre del hack es `Wiimmfi Patch v2` o `Wiimmfi Patch v3`, significa que no tienes la última versión del archivo `hacks_hash.ini`.<br> Descárgalo desde [aquí](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) y colócalo en la carpeta `/apps/priiloader` en tu tarjeta SD o unidad USB, luego repite los pasos anteriores.
+Si el nombre del hack es `Wiimmfi Patch v2` o `Wiimmfi Patch v3`, significa que no tienes la última versión del archivo `hacks_hash.ini`.<br> Descárgalo desde [aquí](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) y colócalo en la carpeta <0>/apps/priiloader</0> en tu tarjeta SD o unidad USB, luego repite los pasos anteriores.
 {: .notice--warning}
 
 ### Aplicación homebrew para discos
@@ -77,7 +77,7 @@ Gracias a Fullmetal5 y su exploit str2hax, el cual Leseratte logro adaptar para
 ##### Instrucciones
 
 1. Inserta tu disco de juego.
-2. Ve a `Opciones de Wii` > `Configuración de Wii` > `Internet` > `Ajustes de conexión` > Elige tu conexión > `Modificar`. Después elige `No` en `Obtener DNS automáticamente`, y selecciona `Configuración avanzada`. Finalmente, ingresa `95.217.77.151` en `DNS primario` y `DNS secundario`, y guarda los cambios.
+2. Ve a `Opciones de Wii` > `Configuración de Wii` > `Internet` > `Ajustes de conexión` > Elige tu conexión > `Modificar`. Después elige `No` en `Obtener DNS automáticamente`, y selecciona `Configuración avanzada`. Finalmente, ingresa `95.217.77.151` en `DNS primario`, y guarda los cambios.
 3. Vuelve a los ajustes de internet, y elige `Documentos legales/Contacto`.
 4. Confirma que quieres usar los servicios del Canal Tienda Wii y WiiConnect24, y después elige `Aceptar`.
 5. Deberías ver la página del parche de Wiimmfi. Si en lugar de eso se muestra el Contrato de Uso de los Servicios de Red de Wii, es posible que tu router no sea compatible con este método.
@@ -98,8 +98,8 @@ Este método permite aplicar el parche de Wiimmfi a algunos juegos antiguos, com
 6. Elige `Modificar`.
 7. Ve hasta la cuarta página, donde está la opción `Obtener DNS automáticamente` (no es en `Obtener drección IP automáticamente`), elige `No` y después selecciona `Configuración avanzada`.
 8. Ingresa `95.217.77.181` en `DNS primario`.
-9. Repite el paso anterior para el DNS secundario.
-10. Selecciona `Confirmar` y después elige `Guardar`.
+9. Escribe `1.1.1.1` en `DNS secundario<code>.</li>
+<li>Selecciona <code>Confirmar` y después elige `Guardar`.
 11. Elige `Aceptar` para realizar una prueba de conexión.
 12. Si la prueba de conexión ha sido exitosa, elige `No` para saltar la actualización de la consola Wii.
 
diff --git a/_pages/es_ES/wiimodlite.md b/_pages/es_ES/wiimodlite.md
index b0ff9d70d..464067601 100644
--- a/_pages/es_ES/wiimodlite.md
+++ b/_pages/es_ES/wiimodlite.md
@@ -1,15 +1,15 @@
 ---
-title: "Wii Mod Lite"
+title: "Instalar WADs con Wii Mod Lite"
 ---
 
 {% include toc title="Tabla de contenido" %}
 
-Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras [el servidor Discord de RiiConnect24](https://discord.gg/rc24) (recomendado) o [envias un correo electronico a support@riiconnect24.net](mailto:support@riiconnect24.net).
+Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
 {: .notice--info}
 
-En esta guía te explicaremos cómo instalar WADs en tu Wii usando Wii Mod Lite. Nosotros recomendamos Wii Mod Lite, pero también hay otros instaladores de WADs como por ejemplo YAWMM.
+Con esta guía aprenderás a instalar archivos WAD en tu Wii usando Wii Mod Lite. Aunque es recomendable usar Wii Mod Lite, también existen otros instaladores de WADs que puedes usar, como por ejemplo YAWMM.
 
-No es recomendable usar "WAD Manager" de Waninkoko.
+No recomendamos utilizar "WAD Manager" de Waninkoko.
 {: .notice--warning}
 
 #### Requisitos
@@ -18,18 +18,20 @@ No es recomendable usar "WAD Manager" de Waninkoko.
 
 #### Instrucciones
 
-##### Sección I - Descarga/instalación
+##### Sección I - Descarga
 
-1. Extrae Wii Mod Lite a la carpeta `apps` en tu tarjeta SD o unidad USB. ![Arrastrar y soltar en tarjeta SD](/images/WiiModLite/1.gif)
+1. Extrae Wii Mod Lite a la carpeta `apps` en tu tarjeta SD o unidad USB. ![Copiando Wii Mod Lite a la tarjeta SD o unidad USB](/images/WiiModLite/1.gif)
 2. Inserta la tarjeta SD o unidad USB en tu Wii e inicia Wii Mod Lite desde el Canal Homebrew.
 
 ##### Sección II - Instalando el WAD
 
-En esta aplicación usarás la cruz de control para desplazarte por las opciones.
+En esta aplicación usarás el botón cruz para desplazarte por las opciones.
 {: .notice--info}
 
-1. Selecciona `WAD Manager`. ![Instalando un WAD](/images/WiiModLite/2.png)
-2. Choose `Wii SD Slot` or `USB Mass Storage Device`, depending on whether you want to use an SD card or USB drive. ![Instalar WADs con Wii Mod Lite](/images/WiiModLite/3.png)
-3. Selecciona el WAD que quieres instalar. En este ejemplo, se están instalando los IOS parcheados para poder usar [RiiConnect24](riiconnect24). Puedes seleccionar varios WADs presionando el botón + sobre cada uno de ellos para así instalarlos automáticamente. ![Selecciona un WAD](/images/WiiModLite/4.gif)
-4. Oprime "A" dos veces para comenzar la instalación. ![Instalación finalizada](/images/WiiModLite/5.png) ![Instalación finalizada](/images/WiiModLite/6.png)
-5. Si en pantalla aparece `Finishing installation... OK!`, entonces el WAD ha sido instalado exitosamente. ![Complete](/images/WiiModLite/7.png) 
+1. Selecciona `WAD Manager`. ![Menú principal de Wii Mod Lite](/images/WiiModLite/2.png)
+2. Elije `Wii SD Slot` o `USB Mass Storage Device`, dependiendo de si deseas utilizar una tarjeta SD o unidad USB. ![Seleccionando dispositivo de almacenamiento](/images/WiiModLite/3.png)
+3. Selecciona el WAD que vas a instalar. En este ejemplo, se están instalando los IOS parcheados para poder usar [RiiConnect24](riiconnect24). Puedes seleccionar varios WADs presionando el botón + sobre cada uno de ellos para así instalarlos automáticamente. ![Seleccionando varios WADs](/images/WiiModLite/4.gif)
+4. Oprime A dos veces para comenzar la instalación.![Instalando varios WADs](/images/WiiModLite/5.png) ![Confirmando la instalación](/images/WiiModLite/6.png)
+5. Si en pantalla aparece el mensaje Finishing installation... OK!</0>, entonces el WAD ha sido instalado exitosamente.
+<img src="/images/WiiModLite/7.png" alt="Instalación finalizada" /> </p></li>
+</ol> 
diff --git a/_pages/es_ES/wiiwarepatcher.md b/_pages/es_ES/wiiwarepatcher.md
index 73578364d..09f190e8a 100644
--- a/_pages/es_ES/wiiwarepatcher.md
+++ b/_pages/es_ES/wiiwarepatcher.md
@@ -1,33 +1,33 @@
 ---
-title: "WiiWare Patcher"
+title: "Parche de Wiimmfi para WiiWare"
 ---
 
 {% include toc title="Tabla de contenido" %}
 
-¿Desea parchear juegos WiiWare para jugar en Wiimmfi pero no sabes cómo hacerlo? En esta guía te explicaremos cómo usar WiiWare Patcher. (Esta guía sólo es apta para usuarios de Windows)
+Con esta guía aprenderás a parchear archivos WAD de juegos WiiWare para jugar en línea a través de Wiimmfi.
 
-![Usando el WiiWare Patcher](/images/rc24_using_the_wiiware_patcher.jpg)
+![Banner](/images/rc24_using_the_wiiware_patcher.jpg)
 
-Esta guía es sólo para la versión de Windows de WiiWare Patcher.
+Si tu PC ejecuta Linux o macOS, deberás descargar y ejecutar el archivo `patcher.sh`, en lugar de `WiiWarePatcher.bat`.
 {: .notice--info}
 
 #### Requisitos
 
-* Una computadora con Windows
+* Una PC
 * [WiiWare Patcher](https://github.com/RiiConnect24/WiiWare-Patcher/releases)
 
-##### Section I - Downloading WiiWare Patcher
+##### Sección I - Descarga
 
-1. Click the link above to go to the GitHub page where the patcher is.
-2. Download `WiiWarePatcher.bat`.
+1. Haz clic en el enlace de arriba para ir al repositorio de WiiWare Patcher en GitHub.
+2. Descarga el archivo `WiiWarePatcher.bat`.
 
-##### Section II - Patching WiiWare games
+##### Sección II - Parcheando los WADs
 
-1. On Windows, run `WiiWarePatcher.bat`. ![WiiWare Patcher Main Menu](/images/WiiWare-Patcher/1.JPG)
-2. Press any key to start the patcher.
-3. Select if you want to patch your games or if you want to download and patch `Wii Speak Channel`. ![Select patching mode](/images/WiiWare-Patcher/2.JPG)
-4. If you're patching your own games, copy them (.WAD files) to the folder where `WiiWarePatcher.bat` is, press `1` and hit ENTER.
-5. The patching process will start. Be patient. ![Patching...](/images/WiiWare-Patcher/3.JPG)
-6. It's done! Patched WAD's are in the `wiimmfi-wads` folder. Install them using Wii Mod Lite or other WAD Manager.
+1. Ejecuta el archivo `WiiWarePatcher.bat`. ![Pantalla de inicio de WiiWare Patcher](/images/WiiWare-Patcher/1.JPG)
+2. Pulsa cualquier tecla para iniciar el programa.
+3. Elige si deseas parchear un juego WiiWare o el Canal Wii Speak. ![Menú principal de WiiWare Patcher](/images/WiiWare-Patcher/2.JPG)
+4. Si vas a parchear tus juegos, copia los archivos WAD a la misma carpeta donde se encuentra el archivo `WiiWarePatcher.bat`, luego pulsa 1 y después Enter.
+5. El proceso de parcheo empezará. Esto puede tardar un poco en función de la cantidad de juegos que vayas a parchear y su tamaño. Por favor ten paciencia. ![Parcheando un WAD](/images/WiiWare-Patcher/3.JPG)
+6. Si el proceso ha sido exitoso, encontrarás los WADs parcheados en la carpeta `wiimmfi-wads`. Puedes instalarlos con Wii Mod Lite, u otro gestor de WADs.
 
-[Return to Wiimmfi installation page](wiimmfi)
+[Volver a la guía de Wiimmfi](wiimmfi)
diff --git a/_pages/es_ES/wilbrand.md b/_pages/es_ES/wilbrand.md
index 33a154d85..82a2a07c9 100644
--- a/_pages/es_ES/wilbrand.md
+++ b/_pages/es_ES/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### Requisitos
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instrucciones
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continuar a la instalación del Canal Homebrew y BootMii](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### Requisitos
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instrucciones
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/es_MX/deleting-vffs.md b/_pages/es_MX/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/es_MX/deleting-vffs.md
+++ b/_pages/es_MX/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/es_MX/dump-games.md b/_pages/es_MX/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/es_MX/dump-games.md
+++ b/_pages/es_MX/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/es_MX/get-started.md b/_pages/es_MX/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/es_MX/get-started.md
+++ b/_pages/es_MX/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/es_MX/modmii.md b/_pages/es_MX/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/es_MX/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/es_MX/priiloader.md b/_pages/es_MX/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/es_MX/priiloader.md
+++ b/_pages/es_MX/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/es_MX/riiconnect24-vwii.md b/_pages/es_MX/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/es_MX/riiconnect24-vwii.md
+++ b/_pages/es_MX/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/es_MX/riitag.md b/_pages/es_MX/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/es_MX/riitag.md
+++ b/_pages/es_MX/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/es_MX/site-navigation.md b/_pages/es_MX/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/es_MX/site-navigation.md
+++ b/_pages/es_MX/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/es_MX/themes-vwii.md b/_pages/es_MX/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/es_MX/themes-vwii.md
+++ b/_pages/es_MX/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/es_MX/themes.md b/_pages/es_MX/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/es_MX/themes.md
+++ b/_pages/es_MX/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/es_MX/wiilink.md b/_pages/es_MX/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/es_MX/wiilink.md
+++ b/_pages/es_MX/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/es_MX/wiimmfi.md b/_pages/es_MX/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/es_MX/wiimmfi.md
+++ b/_pages/es_MX/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/es_MX/wilbrand.md b/_pages/es_MX/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/es_MX/wilbrand.md
+++ b/_pages/es_MX/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/fi_FI/deleting-vffs.md b/_pages/fi_FI/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/fi_FI/deleting-vffs.md
+++ b/_pages/fi_FI/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/fi_FI/dump-games.md b/_pages/fi_FI/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/fi_FI/dump-games.md
+++ b/_pages/fi_FI/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/fi_FI/get-started.md b/_pages/fi_FI/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/fi_FI/get-started.md
+++ b/_pages/fi_FI/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/fi_FI/modmii.md b/_pages/fi_FI/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/fi_FI/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/fi_FI/priiloader.md b/_pages/fi_FI/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/fi_FI/priiloader.md
+++ b/_pages/fi_FI/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/fi_FI/riiconnect24-vwii.md b/_pages/fi_FI/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/fi_FI/riiconnect24-vwii.md
+++ b/_pages/fi_FI/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/fi_FI/riitag.md b/_pages/fi_FI/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/fi_FI/riitag.md
+++ b/_pages/fi_FI/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/fi_FI/site-navigation.md b/_pages/fi_FI/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/fi_FI/site-navigation.md
+++ b/_pages/fi_FI/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/fi_FI/themes-vwii.md b/_pages/fi_FI/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/fi_FI/themes-vwii.md
+++ b/_pages/fi_FI/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/fi_FI/themes.md b/_pages/fi_FI/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/fi_FI/themes.md
+++ b/_pages/fi_FI/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/fi_FI/wiilink.md b/_pages/fi_FI/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/fi_FI/wiilink.md
+++ b/_pages/fi_FI/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/fi_FI/wiimmfi.md b/_pages/fi_FI/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/fi_FI/wiimmfi.md
+++ b/_pages/fi_FI/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/fi_FI/wilbrand.md b/_pages/fi_FI/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/fi_FI/wilbrand.md
+++ b/_pages/fi_FI/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/fr_FR/deleting-vffs.md b/_pages/fr_FR/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/fr_FR/deleting-vffs.md
+++ b/_pages/fr_FR/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/fr_FR/dump-games.md b/_pages/fr_FR/dump-games.md
index c68b90e7a..f4ee6a6d5 100644
--- a/_pages/fr_FR/dump-games.md
+++ b/_pages/fr_FR/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/fr_FR/get-started.md b/_pages/fr_FR/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/fr_FR/get-started.md
+++ b/_pages/fr_FR/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/fr_FR/modmii.md b/_pages/fr_FR/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/fr_FR/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/fr_FR/priiloader.md b/_pages/fr_FR/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/fr_FR/priiloader.md
+++ b/_pages/fr_FR/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/fr_FR/riiconnect24-vwii.md b/_pages/fr_FR/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/fr_FR/riiconnect24-vwii.md
+++ b/_pages/fr_FR/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/fr_FR/riitag.md b/_pages/fr_FR/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/fr_FR/riitag.md
+++ b/_pages/fr_FR/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/fr_FR/site-navigation.md b/_pages/fr_FR/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/fr_FR/site-navigation.md
+++ b/_pages/fr_FR/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/fr_FR/themes-vwii.md b/_pages/fr_FR/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/fr_FR/themes-vwii.md
+++ b/_pages/fr_FR/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/fr_FR/themes.md b/_pages/fr_FR/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/fr_FR/themes.md
+++ b/_pages/fr_FR/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/fr_FR/wiilink.md b/_pages/fr_FR/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/fr_FR/wiilink.md
+++ b/_pages/fr_FR/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/fr_FR/wiimmfi.md b/_pages/fr_FR/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/fr_FR/wiimmfi.md
+++ b/_pages/fr_FR/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/fr_FR/wilbrand.md b/_pages/fr_FR/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/fr_FR/wilbrand.md
+++ b/_pages/fr_FR/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/he_IL/deleting-vffs.md b/_pages/he_IL/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/he_IL/deleting-vffs.md
+++ b/_pages/he_IL/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/he_IL/dump-games.md b/_pages/he_IL/dump-games.md
index c6c116c1e..36afbb676 100644
--- a/_pages/he_IL/dump-games.md
+++ b/_pages/he_IL/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/he_IL/get-started.md b/_pages/he_IL/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/he_IL/get-started.md
+++ b/_pages/he_IL/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/he_IL/modmii.md b/_pages/he_IL/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/he_IL/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/he_IL/priiloader.md b/_pages/he_IL/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/he_IL/priiloader.md
+++ b/_pages/he_IL/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/he_IL/riiconnect24-vwii.md b/_pages/he_IL/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/he_IL/riiconnect24-vwii.md
+++ b/_pages/he_IL/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/he_IL/riitag.md b/_pages/he_IL/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/he_IL/riitag.md
+++ b/_pages/he_IL/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/he_IL/site-navigation.md b/_pages/he_IL/site-navigation.md
index 6a230a727..61c803576 100644
--- a/_pages/he_IL/site-navigation.md
+++ b/_pages/he_IL/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/he_IL/themes-vwii.md b/_pages/he_IL/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/he_IL/themes-vwii.md
+++ b/_pages/he_IL/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/he_IL/themes.md b/_pages/he_IL/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/he_IL/themes.md
+++ b/_pages/he_IL/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/he_IL/wiilink.md b/_pages/he_IL/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/he_IL/wiilink.md
+++ b/_pages/he_IL/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/he_IL/wiimmfi.md b/_pages/he_IL/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/he_IL/wiimmfi.md
+++ b/_pages/he_IL/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/he_IL/wilbrand.md b/_pages/he_IL/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/he_IL/wilbrand.md
+++ b/_pages/he_IL/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/hu_HU/deleting-vffs.md b/_pages/hu_HU/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/hu_HU/deleting-vffs.md
+++ b/_pages/hu_HU/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/hu_HU/dump-games.md b/_pages/hu_HU/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/hu_HU/dump-games.md
+++ b/_pages/hu_HU/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/hu_HU/get-started.md b/_pages/hu_HU/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/hu_HU/get-started.md
+++ b/_pages/hu_HU/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/hu_HU/modmii.md b/_pages/hu_HU/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/hu_HU/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/hu_HU/priiloader.md b/_pages/hu_HU/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/hu_HU/priiloader.md
+++ b/_pages/hu_HU/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/hu_HU/riiconnect24-vwii.md b/_pages/hu_HU/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/hu_HU/riiconnect24-vwii.md
+++ b/_pages/hu_HU/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/hu_HU/riitag.md b/_pages/hu_HU/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/hu_HU/riitag.md
+++ b/_pages/hu_HU/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/hu_HU/site-navigation.md b/_pages/hu_HU/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/hu_HU/site-navigation.md
+++ b/_pages/hu_HU/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/hu_HU/themes-vwii.md b/_pages/hu_HU/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/hu_HU/themes-vwii.md
+++ b/_pages/hu_HU/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/hu_HU/themes.md b/_pages/hu_HU/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/hu_HU/themes.md
+++ b/_pages/hu_HU/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/hu_HU/wiilink.md b/_pages/hu_HU/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/hu_HU/wiilink.md
+++ b/_pages/hu_HU/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/hu_HU/wiimmfi.md b/_pages/hu_HU/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/hu_HU/wiimmfi.md
+++ b/_pages/hu_HU/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/hu_HU/wilbrand.md b/_pages/hu_HU/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/hu_HU/wilbrand.md
+++ b/_pages/hu_HU/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/it_IT/deleting-vffs.md b/_pages/it_IT/deleting-vffs.md
index c94aa84e6..d4f448bf3 100644
--- a/_pages/it_IT/deleting-vffs.md
+++ b/_pages/it_IT/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - Una scheda SD o un'unità USB
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Istruzioni
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/it_IT/dump-games.md b/_pages/it_IT/dump-games.md
index dfec6b8f2..ade926072 100644
--- a/_pages/it_IT/dump-games.md
+++ b/_pages/it_IT/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/it_IT/get-started.md b/_pages/it_IT/get-started.md
index d6f1b17cf..e6a279460 100644
--- a/_pages/it_IT/get-started.md
+++ b/_pages/it_IT/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/it_IT/modmii.md b/_pages/it_IT/modmii.md
new file mode 100644
index 000000000..a640786d0
--- /dev/null
+++ b/_pages/it_IT/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* Una Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Descrizione                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Descrizione                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/it_IT/priiloader.md b/_pages/it_IT/priiloader.md
index ae87149b3..eb49dccd3 100644
--- a/_pages/it_IT/priiloader.md
+++ b/_pages/it_IT/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### Di cosa hai bisogno
 
 - Una scheda SD o un'unità USB
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Istruzioni
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/it_IT/riiconnect24-vwii.md b/_pages/it_IT/riiconnect24-vwii.md
index 590499c84..97dd545aa 100644
--- a/_pages/it_IT/riiconnect24-vwii.md
+++ b/_pages/it_IT/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* Una scheda SD o un'unità USB
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- Una scheda SD o un'unità USB
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/it_IT/riitag.md b/_pages/it_IT/riitag.md
index 5d8af08d0..7a2072865 100644
--- a/_pages/it_IT/riitag.md
+++ b/_pages/it_IT/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/it_IT/site-navigation.md b/_pages/it_IT/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/it_IT/site-navigation.md
+++ b/_pages/it_IT/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/it_IT/themes-vwii.md b/_pages/it_IT/themes-vwii.md
index 228afbefa..06edac602 100644
--- a/_pages/it_IT/themes-vwii.md
+++ b/_pages/it_IT/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/it_IT/themes.md b/_pages/it_IT/themes.md
index d9718526e..f8f47d2a0 100644
--- a/_pages/it_IT/themes.md
+++ b/_pages/it_IT/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/it_IT/wiilink.md b/_pages/it_IT/wiilink.md
index 69b90a8ac..73a8f26eb 100644
--- a/_pages/it_IT/wiilink.md
+++ b/_pages/it_IT/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - Una scheda SD o un'unità USB
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Istruzioni
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Avvia l'Homebrew Channel sulla tua Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Avvia l'Homebrew Channel sulla tua Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/it_IT/wiimmfi.md b/_pages/it_IT/wiimmfi.md
index e0fdaf5a3..d8d73942f 100644
--- a/_pages/it_IT/wiimmfi.md
+++ b/_pages/it_IT/wiimmfi.md
@@ -45,7 +45,7 @@ Se stai utilizzando un'unità USB per installare Priiloader, assicurati di non a
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/it_IT/wilbrand.md b/_pages/it_IT/wilbrand.md
index 3dfa205b7..7d89d50e1 100644
--- a/_pages/it_IT/wilbrand.md
+++ b/_pages/it_IT/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Istruzioni
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Istruzioni
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ja_JP/deleting-vffs.md b/_pages/ja_JP/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/ja_JP/deleting-vffs.md
+++ b/_pages/ja_JP/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/ja_JP/dump-games.md b/_pages/ja_JP/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/ja_JP/dump-games.md
+++ b/_pages/ja_JP/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ja_JP/get-started.md b/_pages/ja_JP/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/ja_JP/get-started.md
+++ b/_pages/ja_JP/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/ja_JP/modmii.md b/_pages/ja_JP/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/ja_JP/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/ja_JP/priiloader.md b/_pages/ja_JP/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/ja_JP/priiloader.md
+++ b/_pages/ja_JP/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ja_JP/riiconnect24-vwii.md b/_pages/ja_JP/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/ja_JP/riiconnect24-vwii.md
+++ b/_pages/ja_JP/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ja_JP/riitag.md b/_pages/ja_JP/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/ja_JP/riitag.md
+++ b/_pages/ja_JP/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/ja_JP/site-navigation.md b/_pages/ja_JP/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/ja_JP/site-navigation.md
+++ b/_pages/ja_JP/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/ja_JP/themes-vwii.md b/_pages/ja_JP/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/ja_JP/themes-vwii.md
+++ b/_pages/ja_JP/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ja_JP/themes.md b/_pages/ja_JP/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/ja_JP/themes.md
+++ b/_pages/ja_JP/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/ja_JP/wiilink.md b/_pages/ja_JP/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/ja_JP/wiilink.md
+++ b/_pages/ja_JP/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/ja_JP/wiimmfi.md b/_pages/ja_JP/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/ja_JP/wiimmfi.md
+++ b/_pages/ja_JP/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/ja_JP/wilbrand.md b/_pages/ja_JP/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/ja_JP/wilbrand.md
+++ b/_pages/ja_JP/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ko_KR/deleting-vffs.md b/_pages/ko_KR/deleting-vffs.md
index 5dbbaf2c6..3ea5510b6 100644
--- a/_pages/ko_KR/deleting-vffs.md
+++ b/_pages/ko_KR/deleting-vffs.md
@@ -22,41 +22,43 @@ RiiConnect24 청소 도구는 이러한 특정 오류와 문제를 해결할 수
 #### 필요한 것
 
 - SD 카드 및 USB 드라이브
-- [RiiConnect24 청소 도구](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 청소 도구](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### 사용 방법
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. 홈브류 채널을 열고 WiiXplorer를 실행합니다.
-2. `NAND`로 이동하여 `시작`, `설정`, `부팅 설정`, `NAND 쓰기 접속`를 차례로 클릭하고 `예`를 선택합니다.
-3. `title`을 클릭한 다음 `00000001` 폴더, `00000002` 폴더, `data` 폴더로 이동합니다.
-4. `cdb.vff` 위로 마우스를 가져가 +를 누른 다음 `복사`, `예`를 차례로 선택합니다.
-5. SD 카드로 이동하여 빈 공간 위로 마우스를 가져간 다음 `붙여넣기`을 누릅니다.
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### 섹션 II - SYSCONF 삭제하기
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
 
-1. RiiConnect24 청소 도구를 압축 해제하고 SD 카드 또는 USB 드라이브의 apps 폴더에 넣습니다.
-2. 홈브류 채널을 연 다음 RiiConnect24 청소 도구를 실행합니다.
-3. IOS 80을 로드하고 A 버튼을 눌러 SYSCONF를 삭제한 다음 B 버튼을 눌러 화면비를 확인하고 재설정합니다.
-4. Wii를 정상적으로 설정하고 `WiiConnect24`로 이동하여 EULA에 동의한 다음 대기 연결을 켭니다.
+1. Extract the RiiConnect24 Clear Tool and put it in the apps folder on your SD card or USB drive.
+2. Open the Homebrew Channel and then launch the RiiConnect24 Clear Tool.
+3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
+4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. 홈브류 채널로 돌아가 WiiXplorer를 열고 `시작`, `설정`, `부팅 설정`으로 이동한 후 `NAND 쓰기 액세스` 및 `예`를 선택합니다.
-2. `cdb.vff` 위로 마우스를 다시 가져가 + 버튼을 누른 다음 `복사` 및 `예`를 선택합니다.
-3. `확인`을 클릭하고 `nand`, `title`, `00000001`, `00000002`, `data` 순서로 이동합니다.
-4. +를 다시 누른 다음 `붙여넣기`, `예`를 차례로 누릅니다.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### 섹션 IV - Wii 시간 동기화하기
+#### Section V - Synchronizing Wii Time
 
-1. sntp를 열어 Wii의 시계를 정확하게 설정합니다.
-2. 마지막으로 연결 테스트를 수행하고 날씨 채널 및 뉴스 채널에 접속하여 오류가 수정되었는지 확인합니다.
+1. Open sntp to set the Wii's clock accurately.
+2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
 
 [RiiConnect24 설치 페이지로 돌아가기](riiconnect24)
 {: .notice--info}
diff --git a/_pages/ko_KR/dump-games.md b/_pages/ko_KR/dump-games.md
index 892ee5256..30ef19fe4 100644
--- a/_pages/ko_KR/dump-games.md
+++ b/_pages/ko_KR/dump-games.md
@@ -95,6 +95,8 @@ FAT32 포맷의 장치에 디스크를 덤프한 경우, `.partX.iso`으로 끝
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ko_KR/get-started.md b/_pages/ko_KR/get-started.md
index 2c0958d1f..16a037f80 100644
--- a/_pages/ko_KR/get-started.md
+++ b/_pages/ko_KR/get-started.md
@@ -32,7 +32,7 @@ Wii 메뉴가 4.3 버전이 아닌 경우 str2hax, Wilbrand 또는 FlashHax를 
     * SD 카드가 필요
     * 버전 4.3 이상이어야 함
 - [Wilbrand](wilbrand) - Wii 메시지 보드를 이용한 취약점 공격
-    * SD 카드와 PC가 필요
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * 버전 3.0 - 4.3에서 작동
 - [FlashHax](flashhax) - 인터넷 채널을 이용하는 취약점 공격
     * 인터넷 채널이 설치되어 있고 인터넷 연결 필요
diff --git a/_pages/ko_KR/modmii.md b/_pages/ko_KR/modmii.md
new file mode 100644
index 000000000..98cc0e326
--- /dev/null
+++ b/_pages/ko_KR/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### 필요한 것
+
+* Wii
+* USB 드라이브 또는 SD 카드
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | 설명                                                                                                                                                                                                                                         |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | 설명                                                                                                            |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[사이트 탐색 계속하기](site-navigation)<br> 여러분이 좋아할 만한 다른 자습서도 많이 있습니다.
+{: .notice--info}
diff --git a/_pages/ko_KR/priiloader.md b/_pages/ko_KR/priiloader.md
index 7c325f8de..872e7d88f 100644
--- a/_pages/ko_KR/priiloader.md
+++ b/_pages/ko_KR/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### 필요한 것
 
 - SD 카드 및 USB 드라이브
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### 사용 방법
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ko_KR/riiconnect24-vwii.md b/_pages/ko_KR/riiconnect24-vwii.md
index 61f8ba7d7..e5104683e 100644
--- a/_pages/ko_KR/riiconnect24-vwii.md
+++ b/_pages/ko_KR/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Wii에 에 RiiConnect24를 설치하려면 [이 자습서](riiconnect24-wii)를 따릅니다.
 - Dolphin 에뮬레이터에 RiiConnect24를 설치하려면 [이 자습서](riiconnect24-dolphin)를 따릅니다.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### 필요한 것
 
-* SD 카드 및 USB 드라이브
-* 컴퓨터
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* Wii U에 연결된 닌텐도 네트워크 ID (NNID)
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 패치 관리자 (윈도우, 맥, 리눅스)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- SD 카드 및 USB 드라이브
+- 컴퓨터
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 패치 관리자 (윈도우, 맥, 리눅스)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* vWii NAND 백업 및 키 (안전하게 보관하세요!!)
-* 홈브류 채널 설치
-* d2x cIOS 설치(IOS249, IOS250, IOS251)
-* IOS80 패치
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -75,8 +84,8 @@ RiiConnect24 패치 관리자를 실행할 수 없는 경우, [RiiConnect24 디
 9. 그 동안 RiiConnect24 패치 관리자는 RiiConnect24를 사용하지 않는 다른 옵션 채널을 추가로 다운로드할 수 있습니다. `[X]`은 선택한 옵션을 나타냅니다. 관심이 없다면 5와 `ENTER`를 누르면 됩니다. ![추가 옵션 채널](/images/RC24_Patcher/6.JPG)
 10. SD 카드 또는 USB 드라이브를 컴퓨터에 연결하고 "`1`"을 선택합니다. ![SD 카드로 복사 활성화](/images/RC24_Patcher/7.JPG)
 11. 장치가 성공적으로 감지되면 "`1`"을 선택합니다. 그렇지 않은 경우 SD 카드 또는 USB 드라이브에 `apps` 폴더가 있는지 확인한 후 다시 시도합니다. ![감지 성공](/images/RC24_Patcher/8.JPG)
-12. Be patient... ![패치 중입니다!](/images/RC24_Patcher/9.JPG)
-13. 완료된 후 잠시 시간을 내어 익명으로 피드백을 보내주시면 감사하겠습니다.  원하지 않는 경우 패치 관리자를 닫으세요. 모든 파일은 이미 SD 카드에 저장되어 있어야 합니다. ![완료되었습니다!](/images/RC24_Patcher/10.JPG) ![파일 복사됨](/images/RC24_Patcher/11.PNG)
+12. 인내심을 가지세요...![패치 중입니다!](/images/RC24_Patcher/9.JPG)
+13. 완료된 후 잠시 시간을 내어 익명으로 피드백을 보내주시면 감사하겠습니다. 원하지 않는 경우 패치 관리자를 닫으세요. 모든 파일은 이미 SD 카드에 저장되어 있어야 합니다. ![완료되었습니다!](/images/RC24_Patcher/10.JPG) ![파일 복사됨](/images/RC24_Patcher/11.PNG)
 14. SD 카드 또는 USB 장치에 모든 것이 자동으로 복사되지 않았다면, `WAD` 및 `apps` 폴더 옆에 있는 `RiiConnect24Patcher.bat` 폴더를 SD 카드 또는 USB 장치에 복사합니다.
 
 ##### 섹션 II - WAD 설치
@@ -111,14 +120,16 @@ nwc24msg.cfg를 올바르게 패치할 수 없는 경우, [RiiConnect24 디스
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### 무엇이 현재 작동하나요?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ko_KR/riitag.md b/_pages/ko_KR/riitag.md
index c6dcef903..5a538950d 100644
--- a/_pages/ko_KR/riitag.md
+++ b/_pages/ko_KR/riitag.md
@@ -49,7 +49,7 @@ RiiTag 키는 누구와도 공유하지 마세요! 만약 공유한다면, 사
 ###### WiiFlow
 
 1. WiiFlow 데이터가 저장된 SD 카드 또는 USB 장치를 컴퓨터에 연결합니다.
-2. 텍스트 편집기로 `/apps/wiiflow/wiiflow.ini`을 엽니다. (WiiFlow Lite를 사용하는 경우 경로에 `Wiiflow` 대신 `Wiiflow_LITE`이 있어야 합니다.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. `gamercards`를 검색하고 해당 라인을 `gamercards=wiinnertag`로 바꿉니다.
 4. `wiinnertag_url`을 검색하여 해당 라인을 `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`으로 바꿉니다.
 5. `wiinnertag_key`을 검색하여 해당 라인을 `wiinnertag_key=<key>`으로 대체하고, `<key>` 섹션 1에서 적어둔 키로 대체합니다.
diff --git a/_pages/ko_KR/site-navigation.md b/_pages/ko_KR/site-navigation.md
index ad1a81ca3..0a1bd08ed 100644
--- a/_pages/ko_KR/site-navigation.md
+++ b/_pages/ko_KR/site-navigation.md
@@ -43,8 +43,9 @@ sitemap: false
 - [홈브류 브라우저](hbb)
 - [홈브류 채널](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
-- [HackMii Installer 다시 시작하기](hackmii)
+- [HackMii 설치 프로그램 다시 시작하기](hackmii)
 - [str2hax](str2hax)
 - [Wii Mod Lite](wiimodlite)
 - [Wilbrand](wilbrand)
@@ -63,6 +64,7 @@ sitemap: false
 - [SysCheck 수행](syscheck)
 - [RSSMii 제거](rssmii-remove)
 - [RiiTag](riitag)
+- [Wii U를 위한 RiiTag](riitag-wiiu)
 - [RTC 시간 설정](rtc)
 - [Wii 메뉴 v4.3으로 업데이트하기](update)
 - [USB 로더 GX](usbloadergx)
diff --git a/_pages/ko_KR/themes-vwii.md b/_pages/ko_KR/themes-vwii.md
index a9a04e178..f30a5f146 100644
--- a/_pages/ko_KR/themes-vwii.md
+++ b/_pages/ko_KR/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 테마 페이지](https://rc24.xyz/goodies/themes/)
-* [Google 드라이브 저장소](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ko_KR/themes.md b/_pages/ko_KR/themes.md
index 5ed93437e..8210b34c0 100644
--- a/_pages/ko_KR/themes.md
+++ b/_pages/ko_KR/themes.md
@@ -40,7 +40,9 @@ Wii와 현재 지역에 맞게 특별히 포맷된 테마만 설치하세요. Wi
 아래는 테마에 대한 몇 가지 링크입니다.
 
 * [RiiConnect24 테마 페이지](https://rc24.xyz/goodies/themes/)
-* [구글 드라이브 저장소](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 계속하기 전에 상단의 경고 사항을 반드시 읽어주세요!
diff --git a/_pages/ko_KR/wiilink.md b/_pages/ko_KR/wiilink.md
index db2a61156..e0d461b38 100644
--- a/_pages/ko_KR/wiilink.md
+++ b/_pages/ko_KR/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - SD 카드 및 USB 드라이브
 - 인터넷에 연결된 Wii
 - 윈도우즈, 맥OS 또는 리눅스 컴퓨터
-- [WiiLink 패치 관리자](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### 사용 방법
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. 운영 체제에 따라 `<OS Platform>`이 `윈도우즈`, `맥OS` 또는 `리눅스`인 경우 `WiiLink_Patcher_<OS Platform>_v1.X.XX`를 다운로드합니다.
-2. SD 카드 또는 USB 드라이브를 컴퓨터에 연결합니다. 패처가 SD 카드 또는 USB 장치를 자동으로 감지할 수 있도록 SD 카드 또는 USB 장치의 루트에 `apps` 폴더가 있는지 확인합니다.
-3. 윈도우즈에서 패치 관리자를 열려면 `WiiLink_Patcher_Windows_v1.X.X.exe`를 더블클릭하면 됩니다.
-
-   맥OS 및 리눅스에서는 다음 순서를 따라야 합니다:
-   - 먼저 터미널에 <br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X`를 입력하여 파일 실행 권한을 부여합니다. 운영 체제에 따라<br>`<OS 플랫폼>`을 `맥OS` 또는 `리눅스`로 교체합니다.
-   - 그런 다음 동일한 터미널 창에 `./WiiLink_Patcher_<OS Platform>_v1.X.X`를 입력하여 패치 관리자를 실행합니다.
-4. 휴대용 저장 장치가 성공적으로 감지되었다면 `SD Card detected`라는 메시지가 표시됩니다. 그렇지 않은 경우 SD 카드 또는 USB 장치의 위치를 수동으로 선택해야 합니다.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Wii에 SD 카드나 USB 드라이브를 연결합니다.
-11. Wii에서 홈브류 채널을 실행합니다.
-12. Wii Mod Lite를 실행합니다.
-13. Wii 리모컨의 +컨트롤 패드를 사용하여 `WAD Manager`로 이동한 다음 `wad` 폴더로 이동합니다.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Wii에 SD 카드나 USB 드라이브를 연결합니다.
+1. Wii에서 홈브류 채널을 실행합니다.
+1. Wii Mod Lite를 실행합니다.
+1. Wii 리모컨의 +컨트롤 패드를 사용하여 `WAD Manager`로 이동한 다음 `wad` 폴더로 이동합니다.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. 설치가 완료되면 HOME 버튼을 눌러 홈브류 채널로 돌아갑니다.
+1. 설치가 완료되면 HOME 버튼을 눌러 홈브류 채널로 돌아갑니다.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
@@ -54,11 +48,11 @@ Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow th
 Adding your email to the Address Information (SPD) settings menu will allow the Digicam Print Channel to send images to your email that you created using it.
 {: .notice--info}
 
-1. Wii의 홈 메뉴에서 디지캠 프린트 채널을 실행합니다.
-2. 오른쪽 하단에서 `주소 설정`을 누른 다음 `예`를 누릅니다.
-3. 주소 정보 메뉴에서 `이메일 주소`를 클릭하고 이메일 주소를 입력합니다. (**올바르게 입력**하지 않으면 **작동하지 않습니다!**)
-4. `확인`을 누른 다음 `완료`를 누릅니다.
-5. 주소 정보 메뉴로 돌아오면 `선택 채널` 메뉴에서 `디지캠`을 선택합니다. 이 작업을 완료하면 작동합니다!
+1. Launch Digicam Print Channel from your Wii's home menu.
+2. On the bottom right, press `Address settings` and then `Yes`.
+3. Click on `Email Address` within the Address Information menu and type in your email address. (make sure you **put it in correctly** or it **will not work!**)
+4. Press `OK` and then `Done`.
+5. Once you are back in the Address Information menu, choose `Digicam` in the `Choose Channel` menu. After you’ve done that, it should work!
 
 For PAL (European Wiis)<br> In Wii Settings please set TV Resolution to 60 HZ (480p/480i). You can find this in `Screen -> TV Resolution` If you do not, a pink bar will appear at the bottom of the screen obscuring vision.
 {: .notice--info}
diff --git a/_pages/ko_KR/wiimmfi.md b/_pages/ko_KR/wiimmfi.md
index b9724c52c..f1bcc7dfe 100644
--- a/_pages/ko_KR/wiimmfi.md
+++ b/_pages/ko_KR/wiimmfi.md
@@ -45,7 +45,7 @@ USB 드라이브를 사용하여 Priiloader를 설치하는 경우, SD 카드가
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-대신 해킹 `Wiimmfi 패치 v2` 또는 `Wiimmfi 패치 v3`이 표시된다면, 최신 버전의 hacks_hash.ini 파일이 없는 것입니다.<br> [여기](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini)에서 다운로드하여 SD 카드 또는 USB 드라이브의 `/apps/priiloader/hacks_hash.ini`에 넣으세요.<br> 그런 다음 이전 단계를 반복합니다.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### 홈브류 (디스크) 응용 프로그램
diff --git a/_pages/ko_KR/wilbrand.md b/_pages/ko_KR/wilbrand.md
index 31167efc1..dcb3090f8 100644
--- a/_pages/ko_KR/wilbrand.md
+++ b/_pages/ko_KR/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand는 LetterBomb과 마찬가지로 Wii 메시지 게시판을 사용하
 LetterBomb과 달리 Wilbrand는 Wii 메뉴 버전 3.0까지 지원합니다.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### 필요한 것
+
+- FAT32/MS-DOS로 포맷된 SD 카드
+- 버전 3.0 이상의 Wii
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### 사용 방법
+
+1.  Wii에서 `Wii 설정`으로 이동하여 오른쪽 상단에 있는 버전을 기록합니다. `인터넷` -> `콘솔 정보`로 이동하여 MAC 주소를 기록합니다.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  SD 카드를 꺼내 Wii에 연결합니다.
+    - SD 카드는 Wii 전면에 있는 SD 카드 슬롯에 연결해야 합니다. Wii의 USB 포트에 연결된 USB 어댑터를 사용하면 작동하지 않습니다.
+1.  Wii에서 Wii 메뉴로 돌아가서 Wii 메시지 게시판을 엽니다.
+1.  폭탄 아이콘이 있는 녹색 편지 봉투를 엽니다.
+    - Wii의 날짜가 정확하지 않으면 편지를 찾지 못할 수 있습니다.
+    - 메일이 전날 또는 다음 날에 도착했을 수 있습니다.
+    - 녹색 편지 봉투가 보이지 않으면 `데이터 관리`에서 SD 카드 섹션에 오류가 표시되는지 확인하세요. 이 경우 SD 카드 형식 또는 Wii의 SD 카드 리더기에 문제가 있는 것일 수 있습니다. ![Natural habitat의 Wilbrand](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[홈브류 채널 및 BootMii 설치로 계속 진행하기](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### 필요한 것
 
 - 윈도우즈, 맥OS, 리눅스를 실행하는 PC
@@ -20,6 +54,9 @@ LetterBomb과 달리 Wilbrand는 Wii 메뉴 버전 3.0까지 지원합니다.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii 설치 프로그램 v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### 사용 방법
 
 1.  Wii에서 `Wii 설정`으로 이동하여 오른쪽 상단에 있는 버전을 기록합니다. `인터넷` -> `콘솔 정보`로 이동하여 MAC 주소를 기록합니다.
@@ -39,13 +76,13 @@ LetterBomb과 달리 Wilbrand는 Wii 메뉴 버전 3.0까지 지원합니다.
 1.  HackMii 설치 프로그램 v1.2를 PC의 폴더에 압축을 풉니다.
     - 아카이브 관리자에서 zip 파일을 열 수도 있습니다.
 1.  `boot.elf` 파일을 찾아 SD 카드의 루트에 넣습니다.
-1.  SD 카드를 꺼내 Wii에 연결합니다.
-    - SD 카드는 Wii 전면에 있는 SD 카드 슬롯에 연결해야 합니다. Wii의 USB 포트에 연결된 USB 어댑터를 사용하면 작동하지 않습니다.
-1.  Wii에서 Wii 메뉴로 돌아가서 Wii 메시지 게시판을 엽니다.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
 1.  폭탄 아이콘이 있는 녹색 편지 봉투를 엽니다.
-    - Wii의 날짜가 정확하지 않으면 편지를 찾지 못할 수 있습니다.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
     - 메일이 전날 또는 다음 날에 도착했을 수 있습니다.
     - 녹색 편지 봉투가 보이지 않으면 `데이터 관리`에서 SD 카드 섹션에 오류가 표시되는지 확인하세요. 이 경우 SD 카드 형식 또는 Wii의 SD 카드 리더기에 문제가 있는 것일 수 있습니다. ![Natural habitat의 Wilbrand](/images/wilbrand/msgboard.png)
 
-[홈브류 채널 및 BootMii 설치로 계속 진행하기](hbc)
+[홈브류 채널과 BootMii 설치로 계속하기](hbc)
 {: .notice--info}
diff --git a/_pages/nl_NL/deleting-vffs.md b/_pages/nl_NL/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/nl_NL/deleting-vffs.md
+++ b/_pages/nl_NL/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/nl_NL/dump-games.md b/_pages/nl_NL/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/nl_NL/dump-games.md
+++ b/_pages/nl_NL/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/nl_NL/get-started.md b/_pages/nl_NL/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/nl_NL/get-started.md
+++ b/_pages/nl_NL/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/nl_NL/modmii.md b/_pages/nl_NL/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/nl_NL/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/nl_NL/priiloader.md b/_pages/nl_NL/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/nl_NL/priiloader.md
+++ b/_pages/nl_NL/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/nl_NL/riiconnect24-vwii.md b/_pages/nl_NL/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/nl_NL/riiconnect24-vwii.md
+++ b/_pages/nl_NL/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/nl_NL/riitag.md b/_pages/nl_NL/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/nl_NL/riitag.md
+++ b/_pages/nl_NL/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/nl_NL/site-navigation.md b/_pages/nl_NL/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/nl_NL/site-navigation.md
+++ b/_pages/nl_NL/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/nl_NL/themes-vwii.md b/_pages/nl_NL/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/nl_NL/themes-vwii.md
+++ b/_pages/nl_NL/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/nl_NL/themes.md b/_pages/nl_NL/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/nl_NL/themes.md
+++ b/_pages/nl_NL/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/nl_NL/wiilink.md b/_pages/nl_NL/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/nl_NL/wiilink.md
+++ b/_pages/nl_NL/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/nl_NL/wiimmfi.md b/_pages/nl_NL/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/nl_NL/wiimmfi.md
+++ b/_pages/nl_NL/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/nl_NL/wilbrand.md b/_pages/nl_NL/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/nl_NL/wilbrand.md
+++ b/_pages/nl_NL/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/no_NO/deleting-vffs.md b/_pages/no_NO/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/no_NO/deleting-vffs.md
+++ b/_pages/no_NO/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/no_NO/dump-games.md b/_pages/no_NO/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/no_NO/dump-games.md
+++ b/_pages/no_NO/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/no_NO/get-started.md b/_pages/no_NO/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/no_NO/get-started.md
+++ b/_pages/no_NO/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/no_NO/modmii.md b/_pages/no_NO/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/no_NO/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/no_NO/priiloader.md b/_pages/no_NO/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/no_NO/priiloader.md
+++ b/_pages/no_NO/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/no_NO/riiconnect24-vwii.md b/_pages/no_NO/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/no_NO/riiconnect24-vwii.md
+++ b/_pages/no_NO/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/no_NO/riitag.md b/_pages/no_NO/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/no_NO/riitag.md
+++ b/_pages/no_NO/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/no_NO/site-navigation.md b/_pages/no_NO/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/no_NO/site-navigation.md
+++ b/_pages/no_NO/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/no_NO/themes-vwii.md b/_pages/no_NO/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/no_NO/themes-vwii.md
+++ b/_pages/no_NO/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/no_NO/themes.md b/_pages/no_NO/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/no_NO/themes.md
+++ b/_pages/no_NO/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/no_NO/wiilink.md b/_pages/no_NO/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/no_NO/wiilink.md
+++ b/_pages/no_NO/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/no_NO/wiimmfi.md b/_pages/no_NO/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/no_NO/wiimmfi.md
+++ b/_pages/no_NO/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/no_NO/wilbrand.md b/_pages/no_NO/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/no_NO/wilbrand.md
+++ b/_pages/no_NO/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/pl_PL/deleting-vffs.md b/_pages/pl_PL/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/pl_PL/deleting-vffs.md
+++ b/_pages/pl_PL/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/pl_PL/dump-games.md b/_pages/pl_PL/dump-games.md
index f57fe8dfa..a74acc8c0 100644
--- a/_pages/pl_PL/dump-games.md
+++ b/_pages/pl_PL/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/pl_PL/get-started.md b/_pages/pl_PL/get-started.md
index 9ef89ec4b..b9e4e544c 100644
--- a/_pages/pl_PL/get-started.md
+++ b/_pages/pl_PL/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/pl_PL/modmii.md b/_pages/pl_PL/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/pl_PL/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/pl_PL/priiloader.md b/_pages/pl_PL/priiloader.md
index 676ad5c6a..95dcd32a9 100644
--- a/_pages/pl_PL/priiloader.md
+++ b/_pages/pl_PL/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/pl_PL/riiconnect24-vwii.md b/_pages/pl_PL/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/pl_PL/riiconnect24-vwii.md
+++ b/_pages/pl_PL/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/pl_PL/riitag.md b/_pages/pl_PL/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/pl_PL/riitag.md
+++ b/_pages/pl_PL/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/pl_PL/site-navigation.md b/_pages/pl_PL/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/pl_PL/site-navigation.md
+++ b/_pages/pl_PL/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/pl_PL/themes-vwii.md b/_pages/pl_PL/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/pl_PL/themes-vwii.md
+++ b/_pages/pl_PL/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/pl_PL/themes.md b/_pages/pl_PL/themes.md
index 7e21a0da2..8cf0a0b50 100644
--- a/_pages/pl_PL/themes.md
+++ b/_pages/pl_PL/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/pl_PL/wiilink.md b/_pages/pl_PL/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/pl_PL/wiilink.md
+++ b/_pages/pl_PL/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/pl_PL/wiimmfi.md b/_pages/pl_PL/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/pl_PL/wiimmfi.md
+++ b/_pages/pl_PL/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/pl_PL/wilbrand.md b/_pages/pl_PL/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/pl_PL/wilbrand.md
+++ b/_pages/pl_PL/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/pt_BR/deleting-vffs.md b/_pages/pt_BR/deleting-vffs.md
index 3ace3f784..c41eb2492 100644
--- a/_pages/pt_BR/deleting-vffs.md
+++ b/_pages/pt_BR/deleting-vffs.md
@@ -22,41 +22,43 @@ RiiConnect24 Clear Tool é um aplicativo homebrew que pode corrigir esses erros
 #### Você precisará de
 
 - Um cartão SD ou armazenamento USB
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instruções
 
-#### Seção I - Fazendo Backup dos dados do Wii Message Board
+#### Section I - Downloading Apps
 
-1. Abra o Homebrew Channel e abra o WiiXplorer.
-2. Vá para `nand` e clique em `Start`, então `Settings`, então `Boot Settings`, então `NAND Write Access`, e selecione `Yes`.
-3. Clique em `title` e então navegue para a pasta `00000001` depois a pasta `00000002`, então a pasta `data`.
-4. Destaque `cdb.vff` e pressione +, então selecione `Copy` e então `Yes`.
-5. Vá para o cartão SD e destaque um espaço em branco, então pressione `Paste`.
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Seção II - Deletando SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deletar o SYSCONF vai apagar o histórico do Wii Message Board. Siga a seção abaixo se deseja mantê-lo.
 {: .notice--danger}
 
-1. Extraia o RiiConnect24 Clear Tool e coloque dentro da pasta apps no seu cartão SD ou USB.
-2. Abra o Homebrew Channel e então inicie o RiiConnect24 Clear Tool.
-3. Carregue a IOS 80 e pressione A para deletar o SYSCONF, então pressione B para confirmar e redefinir a proporção da tela.
-4. Configure o Wii como normalmente e vá para `WiiConnect24`, aceite o EULA e ligue a conexão standby.
+1. Extract the RiiConnect24 Clear Tool and put it in the apps folder on your SD card or USB drive.
+2. Open the Homebrew Channel and then launch the RiiConnect24 Clear Tool.
+3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
+4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Seção III - Colocando de volta os dados do Wii Message Board
+#### Section IV - Putting back Wii Message Board Data
 
-1. Volte para o Homebrew Channel e abra o WiiXplorer e navegue para `Start`, então `Settings`, então `Boot Settings`, e selecione `NAND Write Access` e `Yes`.
-2. Destaque `cdb.vff` novamente e pressione o botão +, então selecione `Copy` e então `Yes`.
-3. Clique `OK` e navegue para `nand` então `title`, `00000001`, `00000002`, então `data`.
-4. Pressione + novamente e então `Paste`, e então `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Seção IV - Sincronizando o Horário do Wii
+#### Section V - Synchronizing Wii Time
 
-1. Abra sntp para configurar o relógio do Wii com precisão.
-2. Finalmente, faça um teste de conexão e tente acessar o Forecast Channel e o News Channel para se certificar que os erros foram resolvidos.
+1. Open sntp to set the Wii's clock accurately.
+2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
 
 [Voltar à página de instalação do RiiConnect24](riiconnect24)
 {: .notice--info}
diff --git a/_pages/pt_BR/dump-games.md b/_pages/pt_BR/dump-games.md
index 1f7029c01..d191e48c0 100644
--- a/_pages/pt_BR/dump-games.md
+++ b/_pages/pt_BR/dump-games.md
@@ -95,6 +95,8 @@ Para organizar os jogos no seu armazenamento corretamente, você precisará usar
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/pt_BR/get-started.md b/_pages/pt_BR/get-started.md
index 1b8033e36..f832e05e9 100644
--- a/_pages/pt_BR/get-started.md
+++ b/_pages/pt_BR/get-started.md
@@ -32,7 +32,7 @@ Esses exploits são ordenados pela dificuldade do mais fácil para o mais difíc
     * Requer um cartão SD
     * Deve estar na versão 4.3
 - [Wilbrand](wilbrand) - Exploit que também usa o Wii Message Board
-    * Requer um cartão SD e um PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Funciona nas versões 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit que usa o Internet Channel
     * Requer o Internet Channel instalado, e uma conexão com a internet
diff --git a/_pages/pt_BR/modmii.md b/_pages/pt_BR/modmii.md
new file mode 100644
index 000000000..c9d2b2af1
--- /dev/null
+++ b/_pages/pt_BR/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Sumário" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### Você precisará de
+
+* Um Wii
+* Um armazenamento USB ou cartão SD
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Descrição                                                                                                                                                                                                                                  |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Descrição                                                                                                     |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue para a navegação do site](site-navigation)<br> Temos vários outros tutoriais que você pode gostar.
+{: .notice--info}
diff --git a/_pages/pt_BR/priiloader.md b/_pages/pt_BR/priiloader.md
index ae9f72b5d..bc71ee697 100644
--- a/_pages/pt_BR/priiloader.md
+++ b/_pages/pt_BR/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### Você precisará de
 
 - Um cartão SD ou armazenamento USB
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instruções
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/pt_BR/riiconnect24-vwii.md b/_pages/pt_BR/riiconnect24-vwii.md
index 0352010b4..dea0475a4 100644
--- a/_pages/pt_BR/riiconnect24-vwii.md
+++ b/_pages/pt_BR/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Siga [este tutorial](riiconnect24-wii) caso queira instalar RiiConnect24 em um Wii.
 - Siga [este tutorial](riiconnect24-dolphin) se você quiser instalar RiiConnect24 no Emulador Dolphin.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### Você precisará de
 
-* Um cartão SD ou armazenamento USB
-* Um computador
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* Uma Nintendo Network ID (NNID) vinculada ao seu Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac e Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- Um cartão SD ou armazenamento USB
+- Um computador
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac e Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* Um backup da NAND do vWii (mantenha-a guardada com segurança!!)
-* O Homebrew Channel instalado
-* d2x cIOS instalado (IOS249, IOS250 e IOS251)
-* IOS80 com patch
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ Se você não conseguir corrigir a utilizar o RiiConnect24 Patcher, junte-se [ao
 10. Conecte seu cartão SD ou armazenamento USB em seu computador e selecione "`1`". ![Hablite copiar para o cartão SD](/images/RC24_Patcher/7.JPG)
 11. Se seu dispositivo foi detectado com sucesso, selecione "`1`". Caso contrário, certifique-se de que há uma pasta chamada `apps` no seu cartão SD ou armazenamento USB e tente novamente. ![Detectado com sucesso](/images/RC24_Patcher/8.JPG)
 12. Tenha paciência... ![Está fazendo o patch!](/images/RC24_Patcher/9.JPG)
-13. Depois de concluído, nós gostaríamos que você dedicasse um minuto para enviar sua experiencia anônima para nós.  Se você não quiser feche o programa. Todos os arquivos já devem estar no seu cartão SD. ![Está feito!](/images/RC24_Patcher/10.JPG) ![Arquivos copiados](/images/RC24_Patcher/11.PNG)
+13. Depois de concluído, nós gostaríamos que você dedicasse um minuto para enviar sua experiencia anônima para nós. Se você não quiser feche o programa. Todos os arquivos já devem estar no seu cartão SD. ![Está feito!](/images/RC24_Patcher/10.JPG) ![Arquivos copiados](/images/RC24_Patcher/11.PNG)
 14. Se ele não copiou tudo automaticamente para o seu cartão SD ou dispositivo USB, copie a pasta `WAD` e `apps` ao lado de `RiiConnect24Patcher.bat` para o seu cartão SD ou armazenamento USB.
 
 ##### Seção II - Instalando WADs
@@ -111,14 +120,16 @@ Se você não conseguir corrigir a sua nwc24msg.cfg corretamente, junte-se [ao s
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### O que está funcionando atualmente?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/pt_BR/riitag.md b/_pages/pt_BR/riitag.md
index 997cd11e9..b27e77a96 100644
--- a/_pages/pt_BR/riitag.md
+++ b/_pages/pt_BR/riitag.md
@@ -49,7 +49,7 @@ As etapas para conectar o RiiTag ao seu USB Loader dependem do que você usa.
 ###### WiiFlow
 
 1. Pegue o cartão SD ou armazenamento USB que você tem os dados do WiiFlow e o insira no seu computador.
-2. Abra `/apps/wiiflow/wiiflow.ini` com um editor de texto. (Se você usa WiiFlow Lite, o caminho pode ter `wiiflow_lite` em vez de `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Procure por `gamercards` e substitua essa linha por `gamercards=wiinnertag`.
 4. Pesquise por `wiinnertag_url` e substitua essa linha por `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Procure por `wiinnertag_key` e substitua essa linha por `wiinnertag_key=<key>`, substituindo `<key>` pela chave que você anotou na Seção 1.
diff --git a/_pages/pt_BR/site-navigation.md b/_pages/pt_BR/site-navigation.md
index 14e965250..604d4332a 100644
--- a/_pages/pt_BR/site-navigation.md
+++ b/_pages/pt_BR/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Reiniciando o HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Realizando uma Syscheck](syscheck)
 - [Removendo o RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag no Wii U](riitag-wiiu)
 - [Configurando Horário do RTC](rtc)
 - [Atualizando o Menu do Wii para v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/pt_BR/themes-vwii.md b/_pages/pt_BR/themes-vwii.md
index 95ebf1636..b9078fd1a 100644
--- a/_pages/pt_BR/themes-vwii.md
+++ b/_pages/pt_BR/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Repositório do Google Drive](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/pt_BR/themes.md b/_pages/pt_BR/themes.md
index 43b17000f..63c6fb569 100644
--- a/_pages/pt_BR/themes.md
+++ b/_pages/pt_BR/themes.md
@@ -40,7 +40,9 @@ Recomendamos que você [instale cIOS](cios) antes de continuar.
 Abaixo estão alguns links para temas.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Repositório do Google Drive](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 CERTIFIQUE-SE QUE VOCÊ LEU OS AVISOS ACIMA ANTES DE CONTINUAR!
diff --git a/_pages/pt_BR/wiilink.md b/_pages/pt_BR/wiilink.md
index 6657171d2..9d5b4797e 100644
--- a/_pages/pt_BR/wiilink.md
+++ b/_pages/pt_BR/wiilink.md
@@ -14,7 +14,6 @@ O Kirby TV Channel está de volta! <br> Se você o instalou anteriormente, por f
 - Um cartão SD ou armazenamento USB
 - Um Wii conectado à internet
 - Um computador Windows, macOS ou Linux
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instruções
 
@@ -23,28 +22,23 @@ O Kirby TV Channel está de volta! <br> Se você o instalou anteriormente, por f
 [Se você quer ver instruções detalhadas sobre como instalar WADs, clique aqui!](wiimodlite)
 {: .notice--info}
 
-1. Baixe `WiiLink_Patcher_<OS Platform>_v1.X.X`, onde `<OS Platform>` pode ser `Windows`, `macOS`, ou `Linux`, dependendo do seu sistema operacional.
-2. Conecte seu cartão SD ou armazenamento USB em seu computador. Certifique-se de que há uma pasta `apps` na raíz do cartão SD ou armazenamento USB para que o patcher detecte automaticamente seu Cartão SD ou Armazenamento USB.
-3. Para abrir o patcher no Windows, simplesmente dê dois cliques em `WiiLink_Patcher_Windows_v1.X.X.exe`.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Coloque seu cartão SD ou armazenamento USB no seu Wii.
+1. Inicie o Homebrew Channel no Wii.
+1. Inicie o Wii Mod Lite.
+1. Usando o +Control Pad no seu Wii Remote, navegue para `WAD Manager`, depois navegue até a pasta `wad`.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+    - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-   Em macOS e Linux, você precisará seguir os seguintes passos:
-   - Primeiro, dê permissões ao arquivo executável digitando <br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` no seu terminal. Substitua <br>`<OS Platform>` com `macOS` ou `Linux`, dependendo do seu sistema operacional.
-   - Então, execute o patcher digitando `./WiiLink_Patcher_<OS Platform>_v1.X.X` na mesma janela de terminal.
-4. Se seu armazenamento portátil foi detectado com sucesso, você deve ver uma mensagem dizendo `SD Card detected`. Se não, você precisará manualmente selecionar o local do seu cartão SD ou armazenamento USB.
-5. Pressione 1 para escolher `Start` no menu principal, para começar a Express Install Setup do WiiLink. <br> Ou, você pode pressionar 2 para iniciar uma Custom Install.
-6. Siga as instruções na tela para selecionar quais versões dos canais disponíveis você gostaria.
-7. Talvez leve um momento para o patcher fazer download dos arquivos para seu cartão SD ou armazenamento USB.
-8. Assim que completo, você pode fechar o patcher. Todos os arquivos já estão prontos no seu cartão SD.
-9. Se ele não copiou tudo automaticamente para o seu cartão SD ou dispositivo USB, copie a pasta `WAD` e `apps` próximo ao <br>`WiiLink_Patcher_<OS Platform>_v1.X.X` para a raíz do seu cartão SD ou armazenamento USB.
-10. Coloque seu cartão SD ou armazenamento USB no seu Wii.
-11. Inicie o Homebrew Channel no Wii.
-12. Inicie o Wii Mod Lite.
-13. Usando o +Control Pad no seu Wii Remote, navegue para `WAD Manager`, depois navegue até a pasta `wad`.
-14. Se seu Wii não for de uma região japonesa, instale `WiiLink_SPD (Wii).wad` ou `WiiLink_SPD (vWii).wad` (dependendo da plataforma do console) antes de qualquer coisa. Isso é necessário para que possamos saber seu endereço de e-mail para enviar os arquivos.
-15. Destaque todas as outras WADs com `WiiLink` no nome e pressione + para selecioná-las. Quando todas forem selecionadas, pressione A duas vezes para instalar as WADs.
-    - Se você previamente instalou as versões RiiConnect24 do Forecast Channel e do Nintendo Channel, instalar as versões do WiiLink vai sobrescrevê-las.
-
-16. Depois que eles forem instalados com sucesso, pressione o botão HOME para sair para o Homebrew Channel.
+1. Depois que eles forem instalados com sucesso, pressione o botão HOME para sair para o Homebrew Channel.
 
 Quer pedir Pizza da Domino's com o Food Delivery Channel do WiiLink? <br>[Siga este guia!](wiilink-demae-dominos)
 {: .notice--info}
@@ -54,11 +48,11 @@ Quer pedir Pizza da Domino's com o Food Delivery Channel do WiiLink? <br>[Siga e
 Adicionar seu e-mail para o menu de configurações de Address Information (SPD) permitirá que o Digicam Print Channel envie imagens para seu e-mail que você criou o utilizando.
 {: .notice--info}
 
-1. Inicie o Digicam Print Channel do seu Menu do Wii.
-2. Na parte inferior a direita, pressione `Address settings` então `Yes`.
-3. Clique em `Email Address` no menu de Address Information e digite seu endereço de e-mail. (tenha certeza que você **o inseriu corretamente** ou **não irá funcionar!**)
-4. Pressione `OK` então `Done`.
-5. Assim que você estiver de volta no menu de Address Information, escolha `Digicam` no menu `Choose Channel`. Feito isso, deve funcionar!
+1. Launch Digicam Print Channel from your Wii's home menu.
+2. On the bottom right, press `Address settings` and then `Yes`.
+3. Click on `Email Address` within the Address Information menu and type in your email address. (make sure you **put it in correctly** or it **will not work!**)
+4. Press `OK` and then `Done`.
+5. Once you are back in the Address Information menu, choose `Digicam` in the `Choose Channel` menu. After you’ve done that, it should work!
 
 Para PAL (Wiis Europeus)<br> Em Wii Settings por favor coloque TV Resolution para 60 HZ (480p/480i). Você pode encontrar isso em `Screen -> TV Resolution` Se você não fizer isso, uma barra rosa vai aparecer na parte inferior da tela, atrapalhando a visão.
 {: .notice--info}
diff --git a/_pages/pt_BR/wiimmfi.md b/_pages/pt_BR/wiimmfi.md
index 895fb2b48..a6d391f0e 100644
--- a/_pages/pt_BR/wiimmfi.md
+++ b/_pages/pt_BR/wiimmfi.md
@@ -45,7 +45,7 @@ Se você estiver usando um armazenamento USB para instalar o Priiloader, certifi
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-Se você ver o hack `Wiimmfi patch v2` ou `Wiimmfi patch v3` ao invés, então você não tem a versão mais recente do arquivo hacks_hash.ini.<br> Baixe-a [aqui](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) e coloque-a em `/apps/priiloader/hacks_hash.ini` no seu cartão SD ou armazenamento USB.<br> Então, repita os passos anteriores.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Aplicativo Homebrew (Disco)
diff --git a/_pages/pt_BR/wilbrand.md b/_pages/pt_BR/wilbrand.md
index 3a6326813..f336e0867 100644
--- a/_pages/pt_BR/wilbrand.md
+++ b/_pages/pt_BR/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, assim como o LetterBomb, é um exploit para o Wii que pode ser acionad
 Diferente do Letterbomb, Wilbrand suporta versões do menu do Wii anteriores ou iguais a 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### Você precisará de
+
+- Um cartão SD formatado para FAT32/MS-DOS
+- Um Wii pelo menos na versão 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instruções
+
+1.  No seu Wii, vá para `Wii Settings`, e tome nota da versão no canto superior direito. Vá para `Internet` -> `Console Information` e também tome nota do seu MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extraia o conteúdo do ZIP baixado para a raiz do seu cartão SD.
+1.  Pegue seu cartão SD e insira-o no seu Wii.
+    - O cartão SD deve ser inserido no slot de cartão SD localizado na frente do Wii. O uso de um adaptador USB conectado à porta USB do Wii não funcionará.
+1.  No seu Wii, retorne ao Menu do Wii e então abra o Wii Message Board.
+1.  Carregue a carta verde com um ícone de Bob-omb.
+    - Certifique-se que a data em seu Wii está correta, caso contrário você não poderá encontrar a carta.
+    - Essa carta pode ter aparecido no dia anterior ou no próximo dia.
+    - Se você não vê a carta verde, cheque se algum erro aparece nas sessões do cartão SD em `Data Management`. Se quaisquer aparecerem, talvez haja um erro com o formato do seu cartão SD ou o leitor de SD do Wii. ![Wilbrand no seu habitat natural](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue para a Instalação do Homebrew Channel e do BootMii](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### Você precisará de
 
 - Um PC executando Windows, MacOS ou Linux
@@ -20,6 +54,9 @@ Diferente do Letterbomb, Wilbrand suporta versões do menu do Wii anteriores ou
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instruções
 
 1.  No seu Wii, vá para `Wii Settings`, e tome nota da versão no canto superior direito. Vá para `Internet` -> `Console Information` e também tome nota do seu MAC address.
diff --git a/_pages/pt_PT/deleting-vffs.md b/_pages/pt_PT/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/pt_PT/deleting-vffs.md
+++ b/_pages/pt_PT/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/pt_PT/dump-games.md b/_pages/pt_PT/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/pt_PT/dump-games.md
+++ b/_pages/pt_PT/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/pt_PT/get-started.md b/_pages/pt_PT/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/pt_PT/get-started.md
+++ b/_pages/pt_PT/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/pt_PT/modmii.md b/_pages/pt_PT/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/pt_PT/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/pt_PT/priiloader.md b/_pages/pt_PT/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/pt_PT/priiloader.md
+++ b/_pages/pt_PT/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/pt_PT/riiconnect24-vwii.md b/_pages/pt_PT/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/pt_PT/riiconnect24-vwii.md
+++ b/_pages/pt_PT/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/pt_PT/riitag.md b/_pages/pt_PT/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/pt_PT/riitag.md
+++ b/_pages/pt_PT/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/pt_PT/site-navigation.md b/_pages/pt_PT/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/pt_PT/site-navigation.md
+++ b/_pages/pt_PT/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/pt_PT/themes-vwii.md b/_pages/pt_PT/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/pt_PT/themes-vwii.md
+++ b/_pages/pt_PT/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/pt_PT/themes.md b/_pages/pt_PT/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/pt_PT/themes.md
+++ b/_pages/pt_PT/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/pt_PT/wiilink.md b/_pages/pt_PT/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/pt_PT/wiilink.md
+++ b/_pages/pt_PT/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/pt_PT/wiimmfi.md b/_pages/pt_PT/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/pt_PT/wiimmfi.md
+++ b/_pages/pt_PT/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/pt_PT/wilbrand.md b/_pages/pt_PT/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/pt_PT/wilbrand.md
+++ b/_pages/pt_PT/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ro_RO/deleting-vffs.md b/_pages/ro_RO/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/ro_RO/deleting-vffs.md
+++ b/_pages/ro_RO/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/ro_RO/dump-games.md b/_pages/ro_RO/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/ro_RO/dump-games.md
+++ b/_pages/ro_RO/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ro_RO/get-started.md b/_pages/ro_RO/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/ro_RO/get-started.md
+++ b/_pages/ro_RO/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/ro_RO/modmii.md b/_pages/ro_RO/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/ro_RO/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/ro_RO/priiloader.md b/_pages/ro_RO/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/ro_RO/priiloader.md
+++ b/_pages/ro_RO/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ro_RO/riiconnect24-vwii.md b/_pages/ro_RO/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/ro_RO/riiconnect24-vwii.md
+++ b/_pages/ro_RO/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ro_RO/riitag.md b/_pages/ro_RO/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/ro_RO/riitag.md
+++ b/_pages/ro_RO/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/ro_RO/site-navigation.md b/_pages/ro_RO/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/ro_RO/site-navigation.md
+++ b/_pages/ro_RO/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/ro_RO/themes-vwii.md b/_pages/ro_RO/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/ro_RO/themes-vwii.md
+++ b/_pages/ro_RO/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ro_RO/themes.md b/_pages/ro_RO/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/ro_RO/themes.md
+++ b/_pages/ro_RO/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/ro_RO/wiilink.md b/_pages/ro_RO/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/ro_RO/wiilink.md
+++ b/_pages/ro_RO/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/ro_RO/wiimmfi.md b/_pages/ro_RO/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/ro_RO/wiimmfi.md
+++ b/_pages/ro_RO/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/ro_RO/wilbrand.md b/_pages/ro_RO/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/ro_RO/wilbrand.md
+++ b/_pages/ro_RO/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/ru_RU/deleting-vffs.md b/_pages/ru_RU/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/ru_RU/deleting-vffs.md
+++ b/_pages/ru_RU/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/ru_RU/dump-games.md b/_pages/ru_RU/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/ru_RU/dump-games.md
+++ b/_pages/ru_RU/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/ru_RU/get-started.md b/_pages/ru_RU/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/ru_RU/get-started.md
+++ b/_pages/ru_RU/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/ru_RU/modmii.md b/_pages/ru_RU/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/ru_RU/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/ru_RU/priiloader.md b/_pages/ru_RU/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/ru_RU/priiloader.md
+++ b/_pages/ru_RU/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/ru_RU/riiconnect24-vwii.md b/_pages/ru_RU/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/ru_RU/riiconnect24-vwii.md
+++ b/_pages/ru_RU/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/ru_RU/riitag.md b/_pages/ru_RU/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/ru_RU/riitag.md
+++ b/_pages/ru_RU/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/ru_RU/site-navigation.md b/_pages/ru_RU/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/ru_RU/site-navigation.md
+++ b/_pages/ru_RU/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/ru_RU/themes-vwii.md b/_pages/ru_RU/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/ru_RU/themes-vwii.md
+++ b/_pages/ru_RU/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/ru_RU/themes.md b/_pages/ru_RU/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/ru_RU/themes.md
+++ b/_pages/ru_RU/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/ru_RU/wiilink.md b/_pages/ru_RU/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/ru_RU/wiilink.md
+++ b/_pages/ru_RU/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/ru_RU/wiimmfi.md b/_pages/ru_RU/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/ru_RU/wiimmfi.md
+++ b/_pages/ru_RU/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/ru_RU/wilbrand.md b/_pages/ru_RU/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/ru_RU/wilbrand.md
+++ b/_pages/ru_RU/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/sr_SP/deleting-vffs.md b/_pages/sr_SP/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/sr_SP/deleting-vffs.md
+++ b/_pages/sr_SP/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/sr_SP/dump-games.md b/_pages/sr_SP/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/sr_SP/dump-games.md
+++ b/_pages/sr_SP/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/sr_SP/get-started.md b/_pages/sr_SP/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/sr_SP/get-started.md
+++ b/_pages/sr_SP/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/sr_SP/modmii.md b/_pages/sr_SP/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/sr_SP/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/sr_SP/priiloader.md b/_pages/sr_SP/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/sr_SP/priiloader.md
+++ b/_pages/sr_SP/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/sr_SP/riiconnect24-vwii.md b/_pages/sr_SP/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/sr_SP/riiconnect24-vwii.md
+++ b/_pages/sr_SP/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/sr_SP/riitag.md b/_pages/sr_SP/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/sr_SP/riitag.md
+++ b/_pages/sr_SP/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/sr_SP/site-navigation.md b/_pages/sr_SP/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/sr_SP/site-navigation.md
+++ b/_pages/sr_SP/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/sr_SP/themes-vwii.md b/_pages/sr_SP/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/sr_SP/themes-vwii.md
+++ b/_pages/sr_SP/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/sr_SP/themes.md b/_pages/sr_SP/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/sr_SP/themes.md
+++ b/_pages/sr_SP/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/sr_SP/wiilink.md b/_pages/sr_SP/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/sr_SP/wiilink.md
+++ b/_pages/sr_SP/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/sr_SP/wiimmfi.md b/_pages/sr_SP/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/sr_SP/wiimmfi.md
+++ b/_pages/sr_SP/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/sr_SP/wilbrand.md b/_pages/sr_SP/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/sr_SP/wilbrand.md
+++ b/_pages/sr_SP/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/sv_SE/deleting-vffs.md b/_pages/sv_SE/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/sv_SE/deleting-vffs.md
+++ b/_pages/sv_SE/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/sv_SE/dump-games.md b/_pages/sv_SE/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/sv_SE/dump-games.md
+++ b/_pages/sv_SE/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/sv_SE/get-started.md b/_pages/sv_SE/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/sv_SE/get-started.md
+++ b/_pages/sv_SE/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/sv_SE/modmii.md b/_pages/sv_SE/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/sv_SE/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/sv_SE/priiloader.md b/_pages/sv_SE/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/sv_SE/priiloader.md
+++ b/_pages/sv_SE/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/sv_SE/riiconnect24-vwii.md b/_pages/sv_SE/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/sv_SE/riiconnect24-vwii.md
+++ b/_pages/sv_SE/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/sv_SE/riitag.md b/_pages/sv_SE/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/sv_SE/riitag.md
+++ b/_pages/sv_SE/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/sv_SE/site-navigation.md b/_pages/sv_SE/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/sv_SE/site-navigation.md
+++ b/_pages/sv_SE/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/sv_SE/themes-vwii.md b/_pages/sv_SE/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/sv_SE/themes-vwii.md
+++ b/_pages/sv_SE/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/sv_SE/themes.md b/_pages/sv_SE/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/sv_SE/themes.md
+++ b/_pages/sv_SE/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/sv_SE/wiilink.md b/_pages/sv_SE/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/sv_SE/wiilink.md
+++ b/_pages/sv_SE/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/sv_SE/wiimmfi.md b/_pages/sv_SE/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/sv_SE/wiimmfi.md
+++ b/_pages/sv_SE/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/sv_SE/wilbrand.md b/_pages/sv_SE/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/sv_SE/wilbrand.md
+++ b/_pages/sv_SE/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/tr_TR/deleting-vffs.md b/_pages/tr_TR/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/tr_TR/deleting-vffs.md
+++ b/_pages/tr_TR/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/tr_TR/dump-games.md b/_pages/tr_TR/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/tr_TR/dump-games.md
+++ b/_pages/tr_TR/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/tr_TR/get-started.md b/_pages/tr_TR/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/tr_TR/get-started.md
+++ b/_pages/tr_TR/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/tr_TR/modmii.md b/_pages/tr_TR/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/tr_TR/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/tr_TR/priiloader.md b/_pages/tr_TR/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/tr_TR/priiloader.md
+++ b/_pages/tr_TR/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/tr_TR/riiconnect24-vwii.md b/_pages/tr_TR/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/tr_TR/riiconnect24-vwii.md
+++ b/_pages/tr_TR/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/tr_TR/riitag.md b/_pages/tr_TR/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/tr_TR/riitag.md
+++ b/_pages/tr_TR/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/tr_TR/site-navigation.md b/_pages/tr_TR/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/tr_TR/site-navigation.md
+++ b/_pages/tr_TR/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/tr_TR/themes-vwii.md b/_pages/tr_TR/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/tr_TR/themes-vwii.md
+++ b/_pages/tr_TR/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/tr_TR/themes.md b/_pages/tr_TR/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/tr_TR/themes.md
+++ b/_pages/tr_TR/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/tr_TR/wiilink.md b/_pages/tr_TR/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/tr_TR/wiilink.md
+++ b/_pages/tr_TR/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/tr_TR/wiimmfi.md b/_pages/tr_TR/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/tr_TR/wiimmfi.md
+++ b/_pages/tr_TR/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/tr_TR/wilbrand.md b/_pages/tr_TR/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/tr_TR/wilbrand.md
+++ b/_pages/tr_TR/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/uk_UA/deleting-vffs.md b/_pages/uk_UA/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/uk_UA/deleting-vffs.md
+++ b/_pages/uk_UA/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/uk_UA/dump-games.md b/_pages/uk_UA/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/uk_UA/dump-games.md
+++ b/_pages/uk_UA/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/uk_UA/get-started.md b/_pages/uk_UA/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/uk_UA/get-started.md
+++ b/_pages/uk_UA/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/uk_UA/modmii.md b/_pages/uk_UA/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/uk_UA/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/uk_UA/priiloader.md b/_pages/uk_UA/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/uk_UA/priiloader.md
+++ b/_pages/uk_UA/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/uk_UA/riiconnect24-vwii.md b/_pages/uk_UA/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/uk_UA/riiconnect24-vwii.md
+++ b/_pages/uk_UA/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/uk_UA/riitag.md b/_pages/uk_UA/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/uk_UA/riitag.md
+++ b/_pages/uk_UA/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/uk_UA/site-navigation.md b/_pages/uk_UA/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/uk_UA/site-navigation.md
+++ b/_pages/uk_UA/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/uk_UA/themes-vwii.md b/_pages/uk_UA/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/uk_UA/themes-vwii.md
+++ b/_pages/uk_UA/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/uk_UA/themes.md b/_pages/uk_UA/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/uk_UA/themes.md
+++ b/_pages/uk_UA/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/uk_UA/wiilink.md b/_pages/uk_UA/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/uk_UA/wiilink.md
+++ b/_pages/uk_UA/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/uk_UA/wiimmfi.md b/_pages/uk_UA/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/uk_UA/wiimmfi.md
+++ b/_pages/uk_UA/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/uk_UA/wilbrand.md b/_pages/uk_UA/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/uk_UA/wilbrand.md
+++ b/_pages/uk_UA/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/vi_VN/deleting-vffs.md b/_pages/vi_VN/deleting-vffs.md
index 4022d9759..9f0d3da93 100644
--- a/_pages/vi_VN/deleting-vffs.md
+++ b/_pages/vi_VN/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### What you need
 
 - An SD card or USB drive
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### Instructions
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/vi_VN/dump-games.md b/_pages/vi_VN/dump-games.md
index 6c675e47a..e642ec599 100644
--- a/_pages/vi_VN/dump-games.md
+++ b/_pages/vi_VN/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/vi_VN/get-started.md b/_pages/vi_VN/get-started.md
index 36087db0a..8831532a2 100644
--- a/_pages/vi_VN/get-started.md
+++ b/_pages/vi_VN/get-started.md
@@ -32,7 +32,7 @@ These exploits are sorted by easiest to hardest difficulty of use.
     * Requires an SD card
     * Must be on version 4.3
 - [Wilbrand](wilbrand) - Exploit that also uses the Wii Message Board
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/vi_VN/modmii.md b/_pages/vi_VN/modmii.md
new file mode 100644
index 000000000..663758f88
--- /dev/null
+++ b/_pages/vi_VN/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### What you need
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[Continue to site navigation](site-navigation)<br> We have many other tutorials that you might like.
+{: .notice--info}
diff --git a/_pages/vi_VN/priiloader.md b/_pages/vi_VN/priiloader.md
index 891193d50..7171a0750 100644
--- a/_pages/vi_VN/priiloader.md
+++ b/_pages/vi_VN/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### What you need
 
 - An SD card or USB drive
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### Instructions
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/vi_VN/riiconnect24-vwii.md b/_pages/vi_VN/riiconnect24-vwii.md
index c5f2f73c4..0ec5014ca 100644
--- a/_pages/vi_VN/riiconnect24-vwii.md
+++ b/_pages/vi_VN/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### What you need
 
-* An SD card or USB drive
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- An SD card or USB drive
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### Section II - Installing WADs
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/vi_VN/riitag.md b/_pages/vi_VN/riitag.md
index 0e7b5b6d0..adddcd854 100644
--- a/_pages/vi_VN/riitag.md
+++ b/_pages/vi_VN/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/vi_VN/site-navigation.md b/_pages/vi_VN/site-navigation.md
index 2139d0f4b..9e0d1300b 100644
--- a/_pages/vi_VN/site-navigation.md
+++ b/_pages/vi_VN/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/vi_VN/themes-vwii.md b/_pages/vi_VN/themes-vwii.md
index 569dc68b5..5006d65fc 100644
--- a/_pages/vi_VN/themes-vwii.md
+++ b/_pages/vi_VN/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/vi_VN/themes.md b/_pages/vi_VN/themes.md
index 8613069bb..d14316b5c 100644
--- a/_pages/vi_VN/themes.md
+++ b/_pages/vi_VN/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/vi_VN/wiilink.md b/_pages/vi_VN/wiilink.md
index fd460d1f2..371cc9cb5 100644
--- a/_pages/vi_VN/wiilink.md
+++ b/_pages/vi_VN/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - An SD card or USB drive
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### Instructions
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/vi_VN/wiimmfi.md b/_pages/vi_VN/wiimmfi.md
index 5a4efe1b4..3c1bcabfa 100644
--- a/_pages/vi_VN/wiimmfi.md
+++ b/_pages/vi_VN/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/vi_VN/wilbrand.md b/_pages/vi_VN/wilbrand.md
index 83f02e0f7..15f6ae790 100644
--- a/_pages/vi_VN/wilbrand.md
+++ b/_pages/vi_VN/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### What you need
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### Instructions
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### What you need
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### Instructions
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
diff --git a/_pages/zh_CN/deleting-vffs.md b/_pages/zh_CN/deleting-vffs.md
index a727a7d33..9ad78cc2a 100644
--- a/_pages/zh_CN/deleting-vffs.md
+++ b/_pages/zh_CN/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool 是一个自制应用程序，可以修复以下特定
 #### 你需要
 
 - 一张 SD 卡或 U 盘
-- [RiiConnect24 清除工具](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 清除工具](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### 步骤
 
-#### 第一部分 - 备份 Wii 留言板数据
+#### 第一部分 - 下载应用
 
-1. 打开 Homebrew Channel 并打开 WiiXplorer。
-2. 进入 `nand` 并点击 `Start`，然后点击 `Settings`，再点击 `Boot Settings`，接着点击 `NAND Write Access`，选择 `Yes`。
-3. 点击 `title`，然后移动至 `00000001` 文件夹，然后进入 `00000002` 文件夹，接着进入 `data` 文件夹。
-4. 将光标悬停在 `cdb.vff` 上，然后按 +，然后选择 `Copy`，接着选择 `Yes`。
-5. 进入 SD 卡并将光标悬停在空白处，然后按下 `Paste`。
+1. 从上面下载 RiiConnect24 Clear Tool、cdbackup 和 sntp。
+1. 将下载的每个应用解压到 SD 卡或 U 盘的根目录。
 
-#### 第二部分 - 删除 SYSCONF
+#### 第二部分 - 备份 Wii 留言板数据
+
+1. 打开 Homebrew Channel 并启动 cdbackup。
+1. 一旦提示，请按 `A` 开始备份您的 Wii 留言板数据。
+1. 备份过程完成后，按 `HOME` 回到 Homebrew Channel。
+
+#### 第三部分 - 删除 SYSCONF
 
 删除 SYSCONF 将清除 Wii 留言板的历史记录。 如果您想保留留言板的历史纪录，请按照上面的部分进行操作。
 {: .notice--danger}
@@ -44,16 +47,15 @@ RiiConnect24 Clear Tool 是一个自制应用程序，可以修复以下特定
 1. 解压 RiiConnect24 Clear Tool 并将其放到 SD 卡或 U 盘的 apps 文件夹。
 2. 打开 Homebrew Channel，然后启动 RiiConnect24 Clear Tool。
 3. 加载 IOS 80，按 A 删除 SYSCONF，然后按 B 确认并重置长宽比。
-4. 按照正常步骤设置 Wii 并进入 `WiiConnect24`，接受 EULA 并打开待机连接。
+4. 按照正常步骤设置 Wii，然后进入 `WiiConnect24`，接受 EULA 并打开待机连接。
 
-#### 第三部分 - 恢复 Wii 留言板数据
+#### 第四部分 - 恢复 Wii 留言板数据
 
-1. 回到 Homebrew Channel，打开 WiiXplorer 并移动至 `Start`，然后点击 `Settings`，接着点击 `Boot Settings`，并选择 `NAND Write Access`，然后选择 `Yes`。
-2. 再次将光标悬停在 `cdb.vff` 上，按下 + 按钮，然后选择 `Copy` 和 `Yes`。
-3. 点击 `OK`，然后移动至 `nand`，然后 `title`、`00000001`、`00000002`，最后选择 `data`。
-4. 再次按下 +，然后选择 `Paste`，接着选择 `Yes`。
+1. 打开 Homebrew Channel，然后再次启动 cdbackup。
+1. 一旦提示，请按 `-` 来恢复 Wii 留言板数据备份。
+1. 恢复过程完成后，按 `HOME` 回到 Homebrew Channel。
 
-#### 第四部分 - 同步 Wii 时间
+#### 第五部分 - 同步 Wii 时间
 
 1. 打开 sntp 以准确设置 Wii 的时钟。
 2. 最后，进行连接测试并尝试访问 Forecast Channel 和 News Channel 以确保错误已被修复。
diff --git a/_pages/zh_CN/dump-games.md b/_pages/zh_CN/dump-games.md
index 7418fd282..bbe73a936 100644
--- a/_pages/zh_CN/dump-games.md
+++ b/_pages/zh_CN/dump-games.md
@@ -95,6 +95,8 @@ title: "导出 Wii/GameCube 游戏"
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/zh_CN/get-started.md b/_pages/zh_CN/get-started.md
index 6442dba5d..f5b527a47 100644
--- a/_pages/zh_CN/get-started.md
+++ b/_pages/zh_CN/get-started.md
@@ -32,7 +32,7 @@ title: "开始"
     * 需要一张 SD 卡
     * 版本必须为 4.3
 - [Wilbrand](wilbrand) - 也是利用 Wii 留言板的漏洞
-    * 需要一张 SD 卡和一台 PC
+    * 仅需带 Web UI 的 SD 卡，否则除 SD 卡外还需要电脑
     * 适用于版本 3.0 - 4.3
 - [FlashHax](flashhax) - 利用 Internet Channel 的漏洞
     * 需要安装 Internet Channel 以及互联网连接
diff --git a/_pages/zh_CN/modmii.md b/_pages/zh_CN/modmii.md
new file mode 100644
index 000000000..10bfb3ab7
--- /dev/null
+++ b/_pages/zh_CN/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="Table of Contents" %}
+
+如果您需要有关本教程的任何帮助，请加入 [Modmii Discord 服务器](https://discord.gg/cMnBRACQwQ)。
+{: .notice--info}
+
+本程序不提供保修，因此您需要对 Wii 可能造成的损坏负责。
+{: .notice--warning}
+
+本程序不适用于 vWii 或 Wii Mini。 某些工具可能适用于这些平台，也可能不适用。
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+在 Modmii Skin 中可能无法访问一些高级功能。 A list of the various activities for Modmii Classic can be found below.
+
+#### 你需要的是
+
+* 一台 Wii
+* 移动硬盘/U 盘或 SD 卡
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | 描述                                                                                                                                                                                                                                         |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | 描述                                                                                                            |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[继续浏览网站导航](site-navigation)<br> 我们还有许多其它您可能会喜欢的教程。
+{: .notice--info}
diff --git a/_pages/zh_CN/priiloader.md b/_pages/zh_CN/priiloader.md
index fc590c180..7f5ae416e 100644
--- a/_pages/zh_CN/priiloader.md
+++ b/_pages/zh_CN/priiloader.md
@@ -17,7 +17,7 @@ Priiloader 为 Wii 添加了一定程度的变砖保护。 它在 Wii 菜单之
 
 {% capture notice-vwii-priiloader %}
 Priiloader 0.10.0 引入了 vWii 支持！ <br> 有一些重要事项需要注意：
-- 要修复时间戳问题（FORE000006、错误的 News Channel 更新时间），您需要 [生成时间戳修复补丁](https://garyodernichts.github.io/priiloader-patch-gen/)。 页面上有更多信息。
+- 要修复时间戳问题（FORE000006、错误的 News Channel 更新时间），您需要[生成时间戳修复补丁](https://garyodernichts.github.io/priiloader-patch-gen/)。 页面上有更多信息。
 - 在安装 Priiloader 后安装主题**会导致您的 vWii 变砖。**
 
 以下是一些增强您的 vWii 体验的方法：
@@ -33,7 +33,7 @@ Priiloader 0.10.0 引入了 vWii 支持！ <br> 有一些重要事项需要注
 #### 你需要的是
 
 - 一张 SD 卡或 U 盘
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### 步骤
@@ -52,7 +52,7 @@ Priiloader 0.10.0 引入了 vWii 支持！ <br> 有一些重要事项需要注
 
 ##### 第三部分 - 进入 Priiloader
 
-安装完 Priiloader 后它会自动出现。 简单地退出 Homebrew Channel，您就会看到 Priiloader 菜单： ![Priiloader 菜单](/images/Priiloader/menu.png)
+安装完成后，Priiloader 会自动出现。 简单地退出 Homebrew Channel，您就会看到 Priiloader 菜单： ![Priiloader 菜单](/images/Priiloader/menu.png)
 
 要稍后进入 Priiloader，只需运行 "Load Priiloader" 自制应用即可。 还有其它进入 Priiloader 的方法：
 - 打开 Wii 的同时按住 RESET。
@@ -68,7 +68,7 @@ Priiloader 0.10.0 引入了 vWii 支持！ <br> 有一些重要事项需要注
 如果您已将 Priiloader installer 放在 U 盘上，请确保没有同时插入 SD 卡。 <br> 这将导致 Priiloader 找不到 `hacks_hash.ini` 文件。
 {: .notice--warning}
 
-1. 在每个您想启用的 hack 上按 `A`。 我们建议您启用 "Block Disc Updates"、"Block Online Updates" 和 "Region Free EVERYTHING"。 ![System menu hacks 列表](/images/Priiloader/system_menu_hacks.png)
+1. 在每个您想启用的 hack 上按 `A`。 We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks 列表](/images/Priiloader/system_menu_hacks.png)
 1. 滚动到 `save settings` 并按 `A`。
 1. 按 `B` 回到主菜单。
 
@@ -157,4 +157,3 @@ Priiloader 允许您自动启动到 Homebrew Channel、单个自制应用程序
 1. 向下滚动到 `save settings`，然后按 A。 ![保存设置](/images/Priiloader/settings_save.png)
 1. 按 B 回到主菜单。
 1. 向上滚动到 `System Menu`，然后按 A。
-
diff --git a/_pages/zh_CN/riiconnect24-vwii.md b/_pages/zh_CN/riiconnect24-vwii.md
index 6fefa5c87..6dd2645b0 100644
--- a/_pages/zh_CN/riiconnect24-vwii.md
+++ b/_pages/zh_CN/riiconnect24-vwii.md
@@ -17,8 +17,9 @@ title: RiiConnect24 vWii 指南
 本指南仅适用于 vWii（Wii U 的 Wii 模式）。
 
 - 如果您想在 Wii 上安装RiiConnect24，请按照[此教程](riiconnect24-wii)进行操作。
-- 如果你想在 Dolphin 模拟器上安装 RiiConnect24，请按照[此教程](riiconnect24-dolphin)进行操作。
-{% endcapture %}
+- 如果您想在 Dolphin 模拟器上安装 RiiConnect24，请按照[此教程](riiconnect24-dolphin)进行操作。
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ title: RiiConnect24 vWii 指南
 
 #### 你需要的是
 
-* 一张 SD 卡或 U 盘
-* 一台电脑
-* [已修改 vWii](https://wiiu.hacks.guide/#/vwii-modding) 的 Wii U。 **此指南需要您的 Wii U 安装了最新的 CFW。**
-* 一个与您的 Wii U 绑定的任天堂网络ID（NNID）
-* 在您的 vWii 上安装了 [Priiloader](priiloader)
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher（Windows、Mac 和 Linux）](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- 一张 SD 卡或 U 盘
+- 一台电脑
+- 拥有互联网连接的 Wii U 主机，可以通过网络浏览器漏洞、Haxchi 或 Coldboot Haxchi 等方式启动 Homebrew Launcher。
+
+如果您的 Wii U 主机没有软破，请按照[此指南](https://wiiu.hacks.guide)以及 [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) 进行操作，然后再回来。
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher（Windows、Mac 和 Linux）](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 在完成上面链接的 vWii 修改指南后，您应该有：
-* vWii NAND 备份和密钥（请妥善保存它们！）
-* 安装了 Homebrew Channel
-* 安装了 d2x cIOS（IOS249、IOS250 和 IOS251）
-* 修补了 IOS80
-{% endcapture %}
+
+- VWii NAND备份和妥善保存的密钥
+- 安装了 Homebrew Channel
+- 安装了 d2x cIOS（IOS249、IOS250 和 IOS251）
+- 修补了 IOS80
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ title: RiiConnect24 vWii 指南
 10. 将 SD 卡或 U 盘连接到电脑上，并选择“`1`”。 ![启用复制到 SD 卡](/images/RC24_Patcher/7.JPG)
 11. 如果成功检测到您的设备，请选择 "`1`"。 如果没有，请确保您的 SD 卡或 U 盘上有一个名为 `apps` 的文件夹，然后重试。 ![成功检测](/images/RC24_Patcher/8.JPG)
 12. 请耐心等待... ![正在打补丁！](/images/RC24_Patcher/9.JPG)
-13. 完成后，如果您能花一分钟时间向我们发送匿名反馈，我们将不胜感激。  如果您不想发送反馈，关闭 patcher（修补程序）。 所有文件应该已经位于您的 SD 卡上。 ![已完成！](/images/RC24_Patcher/10.JPG) ![已复制文件](/images/RC24_Patcher/11.PNG)
+13. 完成后，如果您能花一分钟时间向我们发送匿名反馈，我们将不胜感激。 如果您不想发送反馈，关闭 patcher（修补程序）。 所有文件应该已经位于您的 SD 卡上。 ![已完成！](/images/RC24_Patcher/10.JPG) ![已复制文件](/images/RC24_Patcher/11.PNG)
 14. 如果没有自动将所有文件复制到您的 SD 卡或 U 盘上，请将 `RiiConnect24Patcher.bat` 旁边的 `WAD` 和 `apps` 文件夹复制到您的 SD 卡或 U 盘上。
 
 ##### 第二部分 - 安装 WAD
@@ -111,14 +120,16 @@ title: RiiConnect24 vWii 指南
 1. 回到 Wii U 菜单，然后再次进入 Wii 模式。
 
 #### 目前什么功能可用？
-以下 RiiConnect24 服务在 vWii 上**正常工作**：
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii 邮箱（需要 Priiloader 的 `Create message via Calendar button` 修改）
-{: .notice--success}
 
-如果您让 vWii 运行几个小时，大多数使用 WiiConnect24 的服务将能够正常工作。 vWii 没有待机模式。
+以下 RiiConnect24 服务在 vWii 上**正常工作**：
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii 邮箱（需要 Priiloader 的 `Create message via Calendar button` hack）
+  {: .notice--success}
+
+如果您让 vWii 运行几个小时，大多数使用 WiiConnect24 的服务将能够正常工作。 该主机没有待机模式。
 {: .notice--warning}
diff --git a/_pages/zh_CN/riitag.md b/_pages/zh_CN/riitag.md
index 86043f510..a3ceb06a5 100644
--- a/_pages/zh_CN/riitag.md
+++ b/_pages/zh_CN/riitag.md
@@ -49,7 +49,7 @@ RiiTag 是一个可定制和动态的游戏标签。 通过分享您的游戏标
 ###### WiiFlow
 
 1. 将存放有 WiiFlow 数据的 SD 卡或 U 盘连接到您的电脑上。
-2. 用文本编辑器打开 `/apps/wiiflow/wiiflow.ini`。 （如果您使用的是 WiiFlow Lite，则路径应该是 `wiiflow_lite` 而不是 `wiiflow`。）
+2. 用文本编辑器打开 `/apps/wiiflow/wiiflow.ini`。
 3. 搜索 `gamercards` 并将该行替换为 `gamercards=wiinnertag`。
 4. 搜索 `wiinnertag_url` 并将该行替换为 `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`。
 5. 搜索 `wiinnertag_key` 并将该行替换为 `wiinnertag_key=<key>`，将 `<key>` 替换为您在第一部分中记录的密钥。
diff --git a/_pages/zh_CN/site-navigation.md b/_pages/zh_CN/site-navigation.md
index 56d305f99..e1427ee81 100644
--- a/_pages/zh_CN/site-navigation.md
+++ b/_pages/zh_CN/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [Priiloader](priiloader)
 - [重新启动 HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [执行 SysCheck](syscheck)
 - [卸载 RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [Wii U 上的 RiiTag](riitag-wiiu)
 - [设置 RTC 时间](rtc)
 - [更新 Wii 菜单至 v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/zh_CN/themes-vwii.md b/_pages/zh_CN/themes-vwii.md
index 9a6cec17e..5cfc0037a 100644
--- a/_pages/zh_CN/themes-vwii.md
+++ b/_pages/zh_CN/themes-vwii.md
@@ -35,7 +35,9 @@ title: "在 vWii 上安装 Wii 菜单主题"
 以下是一些主题的链接。
 
 * [RiiConnect24 主题页面](https://rc24.xyz/goodies/themes/)
-* [Google Drive 仓库](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp 下载](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive 仓库](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 只在 vWii 上测试过来自 RiiConnect24 主题页面的主题。 其它来源的主题可能不与 vWii 完全兼容，请自行承担使用风险。
diff --git a/_pages/zh_CN/themes.md b/_pages/zh_CN/themes.md
index 42722d0a4..f67e9a630 100644
--- a/_pages/zh_CN/themes.md
+++ b/_pages/zh_CN/themes.md
@@ -40,7 +40,9 @@ title: "安装 Wii 菜单主题"
 以下是一些主题的链接。
 
 * [RiiConnect24 主题页面](https://rc24.xyz/goodies/themes/)
+* [GBAtemp 下载](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive 仓库](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 在继续之前，请确保您已阅读上述警告！
diff --git a/_pages/zh_CN/wiilink.md b/_pages/zh_CN/wiilink.md
index 27823fea1..ab9da3682 100644
--- a/_pages/zh_CN/wiilink.md
+++ b/_pages/zh_CN/wiilink.md
@@ -14,7 +14,6 @@ Kirby TV Channel 回来了！ <br> 如果您之前安装过，请按照说明进
 - 一张 SD卡 或 U盘
 - 一台有互联网连接的Wii
 - 一台 Windows、macOS 或 Linux 电脑
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### 步骤
 
@@ -23,28 +22,23 @@ Kirby TV Channel 回来了！ <br> 如果您之前安装过，请按照说明进
 [如果您想查看如何安装 WAD 的详细说明，请点击这里！](wiimodlite)
 {: .notice--info}
 
-1. 下载 `WiiLink_Patcher_<OS Platform>_v1.X.X`，其中 `<OS Platform>` 为 `Windows`、`macOS` 或 `Linux`，取决于您的操作系统。
-2. 将您的 SD 卡或 U 盘连接到电脑上。 确保 SD 卡或 U 盘的根目录上有一个名为 `apps` 文件夹，这样才能让 patcher 自动检测到您的 SD 卡或 U 盘。
-3. 要在 Windows 上打开 patcher，只需双击 `WiiLink_Patcher_Windows_v1.X.X.exe`。
-
-   在 macOS 和 Linux 上，您需要按照以下步骤操作：
-   - 首先，在终端中输入以下命令给予文件可执行权限<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X`。 将<br>`<OS Platform>` 替换为 `macOS` 或 `Linux`，取决于您的操作系统。
-   - 然后，在同一个终端窗口中输入 `./WiiLink_Patcher_<OS Platform>_v1.X.X` 来运行 patcher。
-4. 如果成功检测到您的可移动存储设备，您应该会看到一条消息说 `SD Card detected` 。 如果没有，您需要手动选择 SD 卡或 U 盘的位置。
-5. 按 1 来选择主屏幕上的 `Start` ，开始 WiiLink 的快速安装设置。 <br> 或者，您可以按 2 开始自定义安装。
-6. 按照屏幕上的说明选择您想要的可用频道版本。
-7. 请稍等片刻，patcher 将下载文件到您的 SD 卡或 U 盘中。
-8. 完成后，您可以安全地关闭 patcher。 所有文件都已位于您的 SD 卡上。
-9. 如果它没有自动将所有文件复制到您的 SD 卡或 U 盘上，请将<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` 旁边的 `WAD` 和 `apps` 文件夹复制到 SD 卡或 U 盘的根目录下。
-10. 将SD卡或U盘插入Wii。
-11. 启动 Wii 上的 Homebrew Channel。
-12. 启动Wii Mod Lite。
-13. 使用 Wii 遥控器上的方向键，移动到 `WAD Manager`，然后移动到 `wad` 文件夹。
-14. 如果您的 Wii 不是日本区域，请在进行其它任何操作之前安装 `WiiLink_SPD (Wii).wad` 或 `WiiLink_SPD (vWii).wad`（取决于主机平台）。 这是必需的，这样我们才能知道您的电子邮件地址以发送文件。
-15. 突出显示所有其它名字中带 `WiiLink` 的 WAD，然后按 + 选择它们。 当选中所有文件后，按两次 A 键来安装这些 WAD。
+1. 访问 [WiiLink Patcher 发布页面](https://github.com/WiiLink24/WiiLink24-Patcher/releases)并下载适合您操作系统的正确补丁程序。
+1. 在 Windows 上运行 `WiiLink_Patcher_Windows_v1.X.X.exe`。 <br> 在 MacOS 的 Finder 上右键 `WiiLink_Patcher_macOS_v1.X.X` 文件，然后点击打开。 <br> 在 Linux 上打开终端，输入 `bash`（包括空格），然后将文件拖到终端窗口中。 它应该像这样：`bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. 按 `1` 选择 "`Start Express Install Setup`"。
+1. 按照屏幕上的说明选择您想要的可用频道版本。
+1. 在第 6 步中按 `1` 开始打补丁。
+1. 请稍等片刻，patcher（补丁程序）将下载文件到您的 SD 卡或 U 盘中。
+1. 完成后，您可以安全地关闭 patcher（补丁程序）。 所有文件都已位于您的 SD 卡上。
+1. 如果它没有自动将所有文件复制到您的 SD 卡或 U 盘上，请将<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` 旁边的 `WAD` 和 `apps` 文件夹复制到 SD 卡或 U 盘的根目录下。
+1. 将SD卡或U盘插入Wii。
+1. 启动 Wii 上的 Homebrew Channel。
+1. 启动Wii Mod Lite。
+1. 使用 Wii 遥控器上的方向键，移动到 `WAD Manager`，然后移动到 `wad` 文件夹。
+1. 如果您的 Wii 不是日本区域，请在进行其它任何操作之前安装 `WiiLink_SPD (Wii).wad` 或 `WiiLink_SPD (vWii).wad`（取决于主机平台）。 这是必需的，这样我们才能知道您的电子邮件地址以发送文件。
+1. 突出显示所有其它名字中带 `WiiLink` 的 WAD，然后按 + 选择它们。 当选中所有文件后，按两次 A 键来安装这些 WAD。
     - 如果您之前安装过 RiiConnect24 版本的 Forecast Channel 和 Nintendo Channel，安装 WiiLink 的版本将覆盖它们。
 
-16. 安装成功后，按HOME按钮返回Homebrew Channel。
+1. 安装成功后，按HOME按钮返回Homebrew Channel。
 
 想要使用 WiiLink 的 Food Delivery Channel 订购达美乐比萨吗？<br>[按照此指南操作！](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/zh_CN/wiimmfi.md b/_pages/zh_CN/wiimmfi.md
index 111a720bf..e66910c16 100644
--- a/_pages/zh_CN/wiimmfi.md
+++ b/_pages/zh_CN/wiimmfi.md
@@ -45,7 +45,7 @@ title: "Wiimmfi"
 1. 滚动到 `System Menu`，按 A 启动它。
 1. 通过光盘频道启动您的游戏。 它应该已用 Wiimmfi 修补。
 
-如果您看到的是 `Wiimmfi patch v2` 或 `Wiimmfi patch v3`，那么你没有最新版本的 hacks_hash.ini 文件。<br> 从[这里](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini)下载它并将其放在 SD 卡或 U 盘的 `/apps/priiloader/hacks_hash.ini` 路径下。<br> 然后，重复之前的步骤。
+如果您看到的是 `Wiimmfi patch v2` 或 `Wiimmfi patch v3`，那么您没有最新版本的 hacks_hash.ini 文件。<br> 从[这里](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini)下载它并将其放在 SD 卡或 U 盘的 `/apps/priiloader/hacks_hash.ini` 路径下。<br> 然后，重复之前的步骤。
 {: .notice--warning}
 
 ### 自制（光盘）应用程序
diff --git a/_pages/zh_CN/wilbrand.md b/_pages/zh_CN/wilbrand.md
index 246a2e286..aec4d0578 100644
--- a/_pages/zh_CN/wilbrand.md
+++ b/_pages/zh_CN/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand，就像 LetterBomb 一样，是一种通过 Wii 留言板触发的 Wii
 与 LetterBomb 不同，Wilbrand 支持低至 3.0 的 Wii 菜单版本。
 {: .notice--info}
 
+本页列出了两种用于创建正确的 Wilbrand 漏洞的方法。 推荐使用 Wilbrand Web，因为它易用。
+{: .notice--info}
+
+### Wilbrand Web（推荐）
+
+#### 你需要的是
+
+- 格式化为 FAT32/MS-DOS 的 SD 卡
+- 版本至少为 3.0 的 Wii
+
+无法在 4.0 之前的 Wii 菜单版本中使用大于 2GB 的 SD 卡。
+{: .notice--warning}
+
+#### 步骤
+
+1.  转到您 Wii 上的 `Wii 设置`，并记下右上角的版本。 继续前往 `Internet` -> `主机信息`，并记下您的 MAC 地址。
+1.  请访问 [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/)，输入您的 Wii 的 MAC 、版本、区域，确保已勾选 `Bundle the HackMii Installer for me!` ，然后剪断其中一根电线。 ![Wilbrand Web](/images/wilbrand/web.png)
+1.  点击 "Download your .zip"。
+1.  将下载的 ZIP 的内容解压到您 SD 卡的根目录中。
+1.  取出 SD 卡并将其插入 Wii 中。
+    - 必须将 SD 卡插入 Wii 前面的 SD 卡槽中。 使用插入到 Wii USB 接口的 USB 读卡器是无效的。
+1.  在 Wii 上，回到 Wii 菜单，然后打开 Wii 留言板。
+1.  加载带炸弹兵图标的绿色信。
+    - 请确保 Wii 的日期正确，否则您可能找不到信。
+    - 邮件可能出现在前一天或后一天。
+    - 如果您没有看到绿色信，请检查 `数据管理` 中的 SD 卡部分是否有任何错误。 如果有任何问题，可能是由于 SD 卡格式或 Wii 的 SD 卡槽出现问题。 ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+如果这对您不起作用，[尝试其它漏洞](get-started)或尝试 [Wilbrand CLI](#wilbrand-cli)。
+
+[继续到 安装 Homebrew Channel 和 BootMii](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### 你需要的是
 
 - 运行 Windows、MacOS 或 Linux 的 PC
@@ -20,6 +54,9 @@ Wilbrand，就像 LetterBomb 一样，是一种通过 Wii 留言板触发的 Wii
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+无法在 4.0 之前的 Wii 菜单版本中使用大于 2GB 的 SD 卡。
+{: .notice--warning}
+
 #### 步骤
 
 1.  转到您 Wii 上的 `Wii 设置`，并记下右上角的版本。 继续前往 `Internet` -> `主机信息`，并记下您的 MAC 地址。
diff --git a/_pages/zh_TW/deleting-vffs.md b/_pages/zh_TW/deleting-vffs.md
index fe0e3be25..6ee4cc787 100644
--- a/_pages/zh_TW/deleting-vffs.md
+++ b/_pages/zh_TW/deleting-vffs.md
@@ -22,21 +22,24 @@ RiiConnect24 Clear Tool is a homebrew application that can fix these specific er
 #### 必備項目
 
 - 一張 SD 卡或 USB 隨身碟
-- [RiiConnect24 Clear Tool](https://oscwii.org/library/app/RC24-Clear-Tool)
-- [WiiXplorer](https://oscwii.org/library/app/wiixplorer-ss)
+- [RiiConnect24 Clear Tool](https://hbb1.oscwii.org/hbb/RC24-Clear-Tool/RC24-Clear-Tool.zip)
+- [cdbackup](https://hbb1.oscwii.org/hbb/cdbackup/cdbackup.zip)
 - [sntp](https://hbb1.oscwii.org/hbb/sntp/sntp.zip)
 
 #### 操作說明
 
-#### Section I - Backing up Wii Message Board Data
+#### Section I - Downloading Apps
 
-1. Open the Homebrew Channel and open WiiXplorer.
-2. Go to `nand` and click on `Start`, then `Settings`, then `Boot Settings`, then `NAND Write Access`, and select `Yes`.
-3. Click on `title` and then navigate to the `00000001` folder and then the `00000002` folder, then the `data` folder.
-4. Hover over `cdb.vff` and press +, then select `Copy` and then `Yes`.
-5. Go to the SD card and hover over a blank space, then press `Paste.`
+1. Download the RiiConnect24 Clear Tool, cdbackup and sntp from above.
+1. Extract each app you downloaded to the root of your SD card or USB drive.
 
-#### Section II - Deleting SYSCONF
+#### Section II - Backing up Wii Message Board Data
+
+1. Open the Homebrew Channel and launch cdbackup.
+1. Once prompted, press `A` to begin backing up your Wii Message Board data.
+1. Once the backup process finishes, press `HOME` to return to the Homebrew Channel.
+
+#### Section III - Deleting SYSCONF
 
 Deleting SYSCONF will erase the Wii Message Board history. Follow the section above if you would like to keep it.
 {: .notice--danger}
@@ -46,14 +49,13 @@ Deleting SYSCONF will erase the Wii Message Board history. Follow the section ab
 3. Load IOS 80 and press A to delete the SYSCONF, then press B to confirm and reset the aspect ratio.
 4. Set up the Wii as normal and go to `WiiConnect24`, accept the EULA and turn on the standby connection.
 
-#### Section III - Putting back Wii Message Board Data
+#### Section IV - Putting back Wii Message Board Data
 
-1. Go back to the Homebrew Channel to open WiiXplorer and navigate to `Start`, then `Settings`, then `Boot Settings`, and select `NAND Write Access` and `Yes`.
-2. Hover over `cdb.vff` again and press + button, then select `Copy` and `Yes`.
-3. Click `OK` and navigate to `nand` then `title`, `00000001`, `00000002`, then `data`.
-4. Press + again and then `Paste`, and then `Yes`.
+1. Launch the Homebrew Channel, and launch cdbackup again.
+1. Once prompted, press `-` to restore the Wii Message Board data backup.
+1. Once the restore process has finished, press `HOME` to return to the Homebrew Channel.
 
-#### Section IV - Synchronizing Wii Time
+#### Section V - Synchronizing Wii Time
 
 1. Open sntp to set the Wii's clock accurately.
 2. Finally, do a connection test and try accessing the Forecast Channel and News Channel to ensure the errors have been fixed.
diff --git a/_pages/zh_TW/dump-games.md b/_pages/zh_TW/dump-games.md
index 56d6c0c32..91c0e2ef2 100644
--- a/_pages/zh_TW/dump-games.md
+++ b/_pages/zh_TW/dump-games.md
@@ -95,6 +95,8 @@ To organize the games on your drive properly, you'll need to use [Wii Backup Man
     let tabcontent = document.getElementsByClassName("blanktabcontent");
     let tablinks = document.getElementsByClassName("tablinks");
 
+    for (e of tabcontent) element.style.display = "none";
+
     function openTab(evt, tabName) {
         let element;
 
diff --git a/_pages/zh_TW/get-started.md b/_pages/zh_TW/get-started.md
index 3c9790199..ba3cc05f9 100644
--- a/_pages/zh_TW/get-started.md
+++ b/_pages/zh_TW/get-started.md
@@ -32,7 +32,7 @@ If your Wii Menu is not on version 4.3, use str2hax, Wilbrand or FlashHax to ins
     * 需要 SD 卡
     * Must be on version 4.3
 - [LetterBomb](wilbrand) - 同樣為利用 Wii 留言板的漏洞
-    * Requires an SD card and a PC
+    * Requires only an SD card with the Web UI, otherwise requires a PC in addition to the SD card
     * Works on versions 3.0 - 4.3
 - [FlashHax](flashhax) - Exploit that uses the Internet Channel
     * Requires the Internet Channel installed, and an Internet connection
diff --git a/_pages/zh_TW/modmii.md b/_pages/zh_TW/modmii.md
new file mode 100644
index 000000000..b37a09373
--- /dev/null
+++ b/_pages/zh_TW/modmii.md
@@ -0,0 +1,86 @@
+---
+title: "Modmii"
+---
+
+{% include toc title="條目內容" %}
+
+If you need help for anything regarding this tutorial, please join [the Modmii Discord server](https://discord.gg/cMnBRACQwQ).
+{: .notice--info}
+
+This Program does NOT come with a warranty, so you are responsible for any potential damage done to your Wii.
+{: .notice--warning}
+
+This program is NOT intended to be used for the vWii or the Wii Mini. Some tools may or may not work for these platforms.
+{: .notice--warning}
+
+![Modmii](/images/Modmii/modmii.png)
+
+Modmii is a PC program for windows created by XFlak that has various helpful tools for modding, including some tutorials that may not be currently available here on the [wii.guide](site-navigation) website. You can choose to launch in Modmii skin, which has a more user friendly approach, or launch in Modmii Classic, which interacts like a PC terminal or command prompt.
+
+Some advanced options may not be accessible in Modmii Skin. A list of the various activities for Modmii Classic can be found below.
+
+#### 必備項目
+
+* A Wii
+* A USB drive or SD Card
+* A Windows PC (a Virtual Machine will work)
+* [Modmii](https://modmii.github.io/)
+
+ This is a quick start guide on how to use Modmii on your Windows PC.
+
+
+<details id="Modmii-Tools" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available tools.</a></summary>
+
+| Tool                                                                        | Description                                                                                                                                                                                                                                |
+| --------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| W = ModMii Wizard <-- Start Here to Mod Your Wii!                           | This option can be used to mod your wii for the first time or re-mod a wii that has been previously modded.                                                                                                                                |
+| SU = SysCheck Updater Wizard (update only your outdated softmods)           | This option is useful for people who have old modifications installed to their wii such as DarkCorp/Ciosspaghetti that can potetially cause problems for the latest homebrew custom firmware.                                              |
+| U = USB-Loader Setup Wizard                                                 | This option will help you properly set up your usbloader to be able to load your disk backups from an SD or USB hard drive.                                                                                                                |
+| H = HackMii Solutions Wizard (Upside-Down HBC\No Vulnerable IOS Fix)       | This option is useful for people who are having trouble getting the hackmii instalelr to work, or if they just simply have an upside down homebrew channel, or if DarkCorp/Ciosspaghetti was installed and there was no homebrew channel.  |
+| AW = Abstinence Wizard (Non-permanent Wii Hacks)                            | This option is useful for people who dont want to make any permanent modifications to their Wii but still want to have some of the benefits that homebrew can offer.                                                                       |
+| RC = Region Change Wizard                                                   | This option can be used to change the region of your Wii without bricking it (this is the best region changer tutorial available on the internet!).                                                                                        |
+| S = SNEEK Installation, EmuNAND Builder\Modifier, Game Bulk Extractor      | This option will help you properly set up an EmuNAND (aka neek2o) onto your SD or USB. benefits for emunand include extra storage space for save games or channels. and the benefit of not making any permanent modifications to your Wii. |
+| F = open a File or Folder with ModMii for many more functions!              | This option is an advanced tool especially helpful for developers.                                                                                                                                                                         |
+| 1 = Download Page 1 (System Menus, IOSs, MIOSs, Channels, etc.)             | This option opens the first download page that includes most of the key parts for the system menu (downloaded from NUS).                                                                                                                   |
+| 2 = Download Page 2 (Apps, USB-Loader Files, CheatCodes, etc.)              | This option opens the second download page that includes exploits and useful apps for your Wii including some PC programs.                                                                                                                 |
+| 3 = Download Page 3 (System Menu Themes)                                    | This option opens the third download page that includes some system menu themes and items required to install system menu themes (base apps are downloaded from NUS).                                                                      |
+| 4 = Download Page 4 (cIOSs and cMIOSs)                                      | This option opens the third download page that includes cIOSes and cMIOSes for use in usbloaders. It is recommended to just install the recommended cioses unless you plan to do some testing.                                             |
+| A = Advanced Downloads and Forwarder DOL\ISO Builder                       | This option is an advanced tool used to better customize downloads or allow you to build a dol executable useful for fowarders (channels on the system menu to access Wii applications).                                                   |
+| L = Load Download Queue                                                     | This option will download all of the required titles need for the Wii system menu (titles are downloaded from NUS)                                                                                                                         |
+| C = Build Config Files for Bootmii, Wad Manager or Multi-Mod Manager        | This option will help you build configuration files required for certain applications.                                                                                                                                                     |
+| FC = File Cleanup & App Updater: Update Apps and\or remove un-needed files | This option is useful for people who want to clean out their SD or USB of apps deemed outdated, useless, or otherwise depreciated.                                                                                                         |
+| M = ModMii Skin Mode: use your mouse instead of your keyboard!              | This option will launch Modmii skin mode. Some advanced options may not be available in this view.                                                                                                                                         |
+
+</details>
+
+<details id="Modmii-Options" class="notice--info" markdown="1">
+<summary><a>Click here for a full list of available options.</a></summary>
+
+| Option                                                           | Description                                                                                                   |
+| ---------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- |
+| D = Change Drive letter:                                         | Changes where your SD files are saved to.                                                                     |
+| DU = Change Drive letter for USB:                                | Changes where your USB files are saved to.                                                                    |
+| d2x = change d2x cIOS version built:                             | Changes the cios version Modmii downloads.                                                                    |
+| H = Hermes cIOSs (202 & 222-224) will also be recommended        | Enables Hermes IOS to be recommended and downloaded in the syscheck updater (will be stubbed if disabled).    |
+| CM = cMIOS included in recommended cIOSs                         | Enables cMIOS to be recommended and downloaded in the syscheck updater (will install stock MIOS if disabled). |
+| E = Extra Brick Protection in ModMii Wizard Guides               | Enables Modmiis Extra Brick Protection IOSes to be recommended and used in the syscheck updater tool.         |
+| U = Update IOSs. Wizard/SysCheck-Updater to update Active IOSs   | Updates Existing IOSes to the latest version available on NUS.                                                |
+| AU = Auto-Updating downloads will skip update check if cached    | Will skip downloading the files if already in the queue.                                                      |
+| FWD = Install USB-Loader Forwarder in ModMii Wizard Guides       | Will include the USB loader forwarder wad file in the USB loader wizard guides.                               |
+| PC = PC Programs Save Location                                   | Changes the save location for the downloadable PC programs.                                                   |
+| RS = Root Save: Save IOSs\MIOSs to Root instead of WAD Folder   | Saves IOSs\MIOSs to Root instead of WAD Folder.                                                              |
+| 1 = Do not Keep 00000001 or NUS Folders for IOSs\MIOSs\SMs etc | Deletes the folder used for compiling the wad file and just gives you the wad file.                           |
+| n2o = neek2o - build mod of s\uneek instead of original         | Uses a better modified version of neek2o in the EmuNAND builder.                                              |
+| SSD = SNEEK and SNEEK+DI SD Access                               | Allows for SNEEK and SNEEK+DI access on the SD card.                                                          |
+| F = Font.bin Colour for SNEEK/UNEEK                              | Changes the font color for neek2o.                                                                            |
+| SV = SNEEK Verbose Output                                        | Displays extra information regarding EmuNAND.                                                                 |
+| V = Verbose for ModMii Skin & nandBinCheck                       | Displays another window with extra information regarding a nand check.                                        |
+| SO = Play sound at Finish                                        | Plays a fun jingle after a successful download.                                                               |
+| A = Auto-Update ModMii at program start                          | Will automatically check for updates when Modmii is launched.                                                 |
+| N = Check for New versions of ModMii right now                   | Will check online for a Modmii update.                                                                        |
+
+</details>
+
+[繼續至網站導覽](site-navigation)<br> 我們還有許多您可能會喜歡的其他指南。
+{: .notice--info}
diff --git a/_pages/zh_TW/priiloader.md b/_pages/zh_TW/priiloader.md
index 9ec1d0f00..7a7291634 100644
--- a/_pages/zh_TW/priiloader.md
+++ b/_pages/zh_TW/priiloader.md
@@ -33,7 +33,7 @@ And some things to enhance your vWii experience:
 #### 必備項目
 
 - 一張 SD 卡或 USB 隨身碟
-- [Priiloader installer](https://hbb1.oscwii.org/hbb/priiloader/priiloader.zip)
+- [Priiloader installer](https://github.com/DacoTaco/priiloader/releases/download/0.10.0-RC3/Priiloader_v0_10RC3.zip)
 - [LoadPriiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
 
 #### 操作說明
@@ -68,7 +68,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
 If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
 {: .notice--warning}
 
-1. Press `A` on each hack you would like to enable. We reccommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
+1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". ![System menu hacks list](/images/Priiloader/system_menu_hacks.png)
 1. Scroll down to `save settings` and press `A`.
 1. Press `B` to return to the main menu.
 
@@ -157,4 +157,3 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
 1. Scroll down to `save settings` and press A. ![Saving settings](/images/Priiloader/settings_save.png)
 1. Press B to return to the main menu.
 1. Scroll back up to `System Menu` and press A.
-
diff --git a/_pages/zh_TW/riiconnect24-vwii.md b/_pages/zh_TW/riiconnect24-vwii.md
index fe3b7e4d4..5af434692 100644
--- a/_pages/zh_TW/riiconnect24-vwii.md
+++ b/_pages/zh_TW/riiconnect24-vwii.md
@@ -18,7 +18,8 @@ This guide is for vWii (Wii Mode on Wii U) only.
 
 - Follow [this tutorial](riiconnect24-wii) if you'd like to install RiiConnect24 on a Wii.
 - Follow [this tutorial](riiconnect24-dolphin) if you'd like to install RiiConnect24 on Dolphin Emulator.
-{% endcapture %}
+
+{% endcapture notice-1 %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>
 
@@ -35,22 +36,30 @@ We are **NOT** responsible if you brick, or damage your console in any way whats
 
 #### 必備項目
 
-* 一張 SD 卡或 USB 隨身碟
-* A computer
-* A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
-* A Nintendo Network ID (NNID) linked to your Wii U
-* [Priiloader](priiloader) installed on your vWii
-* [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip)
-* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
-* [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
+- 一張 SD 卡或 USB 隨身碟
+- A computer
+- A Wii U console with an Internet connection that's capable of launching the Homebrew Launcher (either via the web browser exploit, Haxchi or Coldboot Haxchi).
+
+If you do not have a softmodded Wii U console, please follow [this guide](https://wiiu.hacks.guide), as well as the [virtual Wii modding guide](https://wiiuguide.xyz/#/vwii-modding) and then come back.
+{: .notice--warning}
+
+<!-- * A Wii U with [the vWii modded](https://wiiu.hacks.guide/#/vwii-modding). **This guide requires the latest CFW on your Wii U.**
+- A Nintendo Network ID (NNID) linked to your Wii U
+- [Priiloader](priiloader) installed on your vWii
+- [Load Priiloader](https://hbb1.oscwii.org/hbb/LoadPriiloader/LoadPriiloader.zip) -->
+
+- [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/RiiConnect24/RiiConnect24-Patcher/releases)
+- [RiiConnect24 Mail Patcher](https://hbb1.oscwii.org/hbb/Mail-Patcher/Mail-Patcher.zip)
 
 {% capture notice-2 %}
 After following the vWii modding guide linked above, you should have:
-* A vWii NAND backup and keys (keep these stored safely!!)
-* The Homebrew Channel installed
-* d2x cIOS installed (IOS249, IOS250 and IOS251)
-* IOS80 patched
-{% endcapture %}
+
+- A vWii NAND backup and keys stored safely
+- The Homebrew Channel installed
+- d2x cIOS installed (IOS249, IOS250 and IOS251)
+- IOS80 patched
+
+{% endcapture notice-2 %}
 
 <div class="notice" markdown="1">
 
@@ -76,7 +85,7 @@ If you can't run RiiConnect24 Patcher, please join [the RiiConnect24 Discord ser
 10. Connect your SD Card or USB Drive to your computer and select "`1`". ![Enable copying to SD Card](/images/RC24_Patcher/7.JPG)
 11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again. ![Successfully detected](/images/RC24_Patcher/8.JPG)
 12. Be patient... ![It's patching!](/images/RC24_Patcher/9.JPG)
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us.  If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
+13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card. ![It's done!](/images/RC24_Patcher/10.JPG) ![Files copied](/images/RC24_Patcher/11.PNG)
 14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
 
 ##### 第二節 — 安裝 WAD 檔案
@@ -111,14 +120,16 @@ If you were unable to patch your nwc24msg.cfg correctly, please join [the RiiCon
 1. Return to the Wii U Menu, then go right back to Wii Mode.
 
 #### What's currently working?
+
 The following RiiConnect24 services are **working** on the vWii:
-* Forecast Channel
-* News Channel
-* Everybody Votes Channel
-* Nintendo Channel
-* Check Mii Out Channel / Mii Contest Channel
-* Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
-{: .notice--success}
+
+- Forecast Channel
+- News Channel
+- Everybody Votes Channel
+- Nintendo Channel
+- Check Mii Out Channel / Mii Contest Channel
+- Wii Mail (requires Priiloader's `Create message via Calendar button` hack)
+  {: .notice--success}
 
 Most services that utilize WiiConnect24 will be able to work if you leave vWii running for several hours. There's no standby mode on the console.
 {: .notice--warning}
diff --git a/_pages/zh_TW/riitag.md b/_pages/zh_TW/riitag.md
index cd56c196e..befa50e4f 100644
--- a/_pages/zh_TW/riitag.md
+++ b/_pages/zh_TW/riitag.md
@@ -49,7 +49,7 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
 ###### WiiFlow
 
 1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor. (If you use WiiFlow Lite, the path should have `wiiflow_lite` instead of `wiiflow`.)
+2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
 3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
 4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
 5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=<key>`, replacing `<key>` with the key you wrote down in Section 1.
diff --git a/_pages/zh_TW/site-navigation.md b/_pages/zh_TW/site-navigation.md
index 3f1d4b655..ac3e7bb65 100644
--- a/_pages/zh_TW/site-navigation.md
+++ b/_pages/zh_TW/site-navigation.md
@@ -43,6 +43,7 @@ sitemap: false
 - [Homebrew Browser](hbb)
 - [Homebrew Channel](hbc)
 - [LetterBomb](letterbomb)
+- [ModMii](modmii)
 - [安裝 Priiloader](priiloader)
 - [Relaunching the HackMii Installer](hackmii)
 - [str2hax](str2hax)
@@ -63,6 +64,7 @@ sitemap: false
 - [Performing a SysCheck](syscheck)
 - [Removing RSSMii](rssmii-remove)
 - [RiiTag](riitag)
+- [RiiTag on Wii U](riitag-wiiu)
 - [Setting RTC Time](rtc)
 - [Updating Wii Menu to v4.3](update)
 - [USB Loader GX](usbloadergx)
diff --git a/_pages/zh_TW/themes-vwii.md b/_pages/zh_TW/themes-vwii.md
index 780bff700..e3dfb824a 100644
--- a/_pages/zh_TW/themes-vwii.md
+++ b/_pages/zh_TW/themes-vwii.md
@@ -35,7 +35,9 @@ If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.ne
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
-* [Google Drive Repository](https://drive.google.com/drive/folders/19tyeVQ--bJ0ZUTNg5yvAGvc3G4-euEpm?usp=sharing)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
+* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 Only themes from the RiiConnect24 Themes page have been tested on vWii. Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
diff --git a/_pages/zh_TW/themes.md b/_pages/zh_TW/themes.md
index c44ecd9bd..3759a2fe4 100644
--- a/_pages/zh_TW/themes.md
+++ b/_pages/zh_TW/themes.md
@@ -40,7 +40,9 @@ We recommend you [install cIOS](cios) before continuing.
 Below are some links to themes.
 
 * [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
+* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
 * [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
+* [Wii Themer](http://www.wiithemer.org/)
 * [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
 
 MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
diff --git a/_pages/zh_TW/wiilink.md b/_pages/zh_TW/wiilink.md
index 83e2f850d..7760da81e 100644
--- a/_pages/zh_TW/wiilink.md
+++ b/_pages/zh_TW/wiilink.md
@@ -14,7 +14,6 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 - 一張 SD 卡或 USB 隨身碟
 - A Wii with an Internet connection
 - A Windows, macOS, or Linux computer
-- [WiiLink Patcher](https://github.com/WiiLink24/WiiLink24-Patcher/releases)
 
 #### 操作說明
 
@@ -23,28 +22,23 @@ The Kirby TV Channel is back! <br> If you installed it previously, please follow
 [If you want to see detailed instructions on how to install the WADs, click here!](wiimodlite)
 {: .notice--info}
 
-1. Download `WiiLink_Patcher_<OS Platform>_v1.X.X`, where `<OS Platform>` is either `Windows`, `macOS`, or `Linux`, depending on your operating system.
-2. Connect your SD Card or USB Drive to your computer. Make sure there is an `apps` folder on the root of the SD Card or USB Device in order for the patcher to automatically detect your SD Card or USB Device.
-3. To open the patcher on Windows, simply double-click on `WiiLink_Patcher_Windows_v1.X.X.exe`.
-
-   On macOS and Linux, you'll need to follow these steps:
-   - First, give the file executable permissions by typing<br>`chmod +x WiiLink_Patcher_<OS Platform>_v1.X.X` in your terminal. Replacing<br>`<OS Platform>` with either `macOS` or `Linux`, depending on your operating system.
-   - Then, run the patcher by typing `./WiiLink_Patcher_<OS Platform>_v1.X.X` in the same terminal window.
-4. If your portable storage device was detected successfully, you should see a message saying `SD Card detected`. If not, you'll need to manually select the location of your SD Card or USB Device.
-5. Press 1 to choose `Start` on the main menu, to start the Express Install Setup of WiiLink. <br> Or, you can press 2 to start a Custom Install.
-6. Follow the on screen instructions to select which versions of the available channels you would like.
-7. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
-8. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
-9. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
-10. Put your SD card or USB drive in your Wii.
-11. Launch the Homebrew Channel on your Wii.
-12. Launch Wii Mod Lite.
-13. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
-14. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
-15. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
+1. Visit the [WiiLink Patcher releases page](https://github.com/WiiLink24/WiiLink24-Patcher/releases) and download the correct patcher for your operating system.
+1. On Windows, run `WiiLink_Patcher_Windows_v1.X.X.exe`. <br> On MacOS, right click the `WiiLink_Patcher_macOS_v1.X.X` file in Finder and click Open. <br> On Linux, open a Terminal, type `bash` (space included), then drag the file onto the Terminal window. It should look like this: `bash /path/to/WiiLink_Patcher_Linux-<arch>_v1.X.X`
+1. Press `1` to choose "`Start Express Install Setup`".
+1. Follow the on screen instructions to select which versions of the available channels you would like.
+1. At step 6, press `1` to begin patching.
+1. It may take a moment for the patcher to download the files to your SD Card or USB Drive.
+1. Once it's done, you can safely close the patcher. All of the files are ready on your SD Card.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to<br>`WiiLink_Patcher_<OS Platform>_v1.X.X` to the root of your SD Card or USB Device.
+1. Put your SD card or USB drive in your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch Wii Mod Lite.
+1. Using the +Control Pad on your Wii Remote, navigate to `WAD Manager`, and then navigate to the `wad` folder.
+1. If your Wii is not a Japanese region, install `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad` (Depending on console platform) before anything else. This is required so that we know your email address to send files.
+1. Highlight all other WADs with `WiiLink` in the name and press + to select them. When all of them are selected, press A twice to install the WADs.
     - If you have previously installed the RiiConnect24 versions of the Forecast Channel and the Nintendo Channel, installing WiiLink's will overwrite them.
 
-16. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
 
 Want to order Domino's Pizza with WiiLink's Food Delivery Channel?<br>[Follow this guide!](wiilink-demae-dominos)
 {: .notice--info}
diff --git a/_pages/zh_TW/wiimmfi.md b/_pages/zh_TW/wiimmfi.md
index 802b6e8fb..1fa3da9d8 100644
--- a/_pages/zh_TW/wiimmfi.md
+++ b/_pages/zh_TW/wiimmfi.md
@@ -45,7 +45,7 @@ If you are using a USB drive to install Priiloader, make sure you do not have an
 1. Scroll to `System Menu` and press A to launch it.
 1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
 
-If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/raw/master/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
+If you see the hack `Wiimmfi patch v2` or `Wiimmfi patch v3` instead, then you do not have the latest version of the hacks_hash.ini file.<br> Download it from [here](https://github.com/DacoTaco/priiloader/blob/master/src/priiloader/hacks_hash.ini) and place it in `/apps/priiloader/hacks_hash.ini` on your SD card or USB drive.<br> Then, repeat the previous steps.
 {: .notice--warning}
 
 ### Homebrew (Disc) Application
diff --git a/_pages/zh_TW/wilbrand.md b/_pages/zh_TW/wilbrand.md
index 6ce96f00e..1fc12688a 100644
--- a/_pages/zh_TW/wilbrand.md
+++ b/_pages/zh_TW/wilbrand.md
@@ -12,6 +12,40 @@ Wilbrand, like LetterBomb, is an exploit for the Wii that is triggered using the
 Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 {: .notice--info}
 
+There are two methods listed on this page used to create the proper Wilbrand exploit. Wilbrand Web is recommended for its ease of use.
+{: .notice--info}
+
+### Wilbrand Web (Recommended)
+
+#### 必備項目
+
+- An SD card formatted to FAT32/MS-DOS
+- A Wii on at least version 3.0
+
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
+#### 操作說明
+
+1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1.  Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire. ![Wilbrand Web](/images/wilbrand/web.png)
+1.  Click on "Download your .zip".
+1.  Extract the contents of the downloaded ZIP to the root of your SD card.
+1.  Take out your SD card and insert it in your Wii.
+    - The SD card must be inserted in the SD card slot located in the front of the Wii. Using a USB adapter plugged into the Wii's USB port will not work.
+1.  On your Wii, return to the Wii Menu and then open the Wii Message Board.
+1.  Load the green letter with the Bob-omb icon.
+    - Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
+    - The mail may have appeared on the previous or next day.
+    - If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader. ![Wilbrand in its natural habitat](/images/wilbrand/msgboard.png)
+
+If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
+
+[Continue to Homebrew Channel and BootMii Installation](hbc)
+{: .notice--info}
+
+### Wilbrand CLI
+
 #### 必備項目
 
 - A PC running Windows, MacOS or Linux
@@ -20,6 +54,9 @@ Unlike LetterBomb, Wilbrand supports Wii menu versions down to 3.0.
 - [Wilbrand](https://static.wiidatabase.de/Wilbrand.zip)
 - [HackMii Installer v1.2](https://bootmii.org/download/)
 
+SD cards larger than 2GB will not work on Wii menu versions before 4.0.
+{: .notice--warning}
+
 #### 操作說明
 
 1.  On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.