Themes overhaul

This commit is contained in:
grunt22fox 2023-10-02 10:28:58 -05:00 committed by Sketch
parent 081c56ad35
commit 5ef73a016d
28 changed files with 235 additions and 301 deletions

View file

@ -59,8 +59,8 @@ chmod +x bluebomb-helper.sh
The console should now boot to the HackMii installer. You can now shut down your Linux computer if you are not planning to use it later.
[If using a Wii, proceed to installing the Homebrew Channel and BootMii](hbc)
If using a Wii: [Continue to Homebrew Channel and BootMii Installation](hbc)<br>
{: .notice--info}
[If using a Wii mini, proceed to installing the Homebrew Channel](hbc-mini)
{: .notice--info}
If using a Wii mini: [Continue to Homebrew Channel installation](hbc-mini)
{: .notice--info}

View file

@ -2,6 +2,8 @@
title: "BootMii Backup"
---
{% include toc title="Table of Contents" %}
BootMii allows for backing up and restoring your Wii's NAND storage. This page will guide you in backing up your Wii's NAND to an SD Card, which you can then use however you like.
Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups. This is because of the lack of GameCube ports which are required on non-boot2 Wiis to enter the restoration confirmation code. Please bear this in mind before you make one, even though it is recommended to do so anyway.
@ -57,4 +59,4 @@ Two files will have been created on the root of your SD Card; `nand.bin` and `ke
[Continue to Priiloader Installation](priiloader)<br>
Priiloader adds a secondary level of brick protection, and is highly recommended even if BootMii was installed as boot2. For BootMii on IOS, it is effectively required to boot in the case of a more severe brick.
{: .notice--info}
{: .notice--info}

View file

@ -4,7 +4,7 @@ title: "Bricks"
{% include toc title="Table of Contents" %}
A "Brick" usually means your Wii has reached a state where its next purpose in existing is likely that of a doorstop, or a display figure. <br>
A "Brick" usually means your Wii has reached a state where its next purpose in existence is likely that of a doorstop, or a display figure. <br>
Bricks can occur for a variety of reasons, however usually it results through corrupted software, or from improper modifications made through homebrew.
# Brick Prevention
@ -142,7 +142,7 @@ If you still have [Priiloader](priiloader), use it to enter the Homebrew Channel
In case you do not have Priiloader or your Wii is not modded, you can try [BlueBomb](bluebomb).
Alternatively, Recovery Mode can be used by holding all 4 buttons on the D-Pad of a GameCube controller that is plugged into the fourth controller port of the Wii.
Alternatively, [Recovery Mode](recovery-mode) can be used to attempt a fix.
## Korean Kii/Error 003 Brick

View file

@ -4,15 +4,18 @@ title: "d2xl cIOS for Wii mini (experimental)"
{% include toc title="Table of Contents" %}
This tutorial will tell you how to install Leseratte's d2xl Wii mini cIOS (custom IOS). This is required if you want to load games with a USB Loader. Some homebrew might work better using cIOS.
If you need help with anything regarding this tutorial, please join [the Wii mini Hacking Discord server](https://discord.gg/6ryxnkS) (recommended)
{: .notice--info}
While [cIOS](https://wiibrew.org/wiki/Custom_IOS) has largely been supplanted by AHBPROT, which gives complete hardware access, it still has useful applications. For example, this enables the functionality of USB loaders like USB Loader GX and WiiFlow, alongside other pieces of homebrew like SaveGame Manager GX. You can skip this process if you want, but generally it extends your Wii with little to no downsides.
![d2x cIOS Installer](/images/cios/cIOS.png)
This guide is only intended for Wii mini users. If you have a Wii, follow [this guide](cios) instead.
{: .notice--warning}
If you need help with anything regarding this tutorial, please join [the Wii mini Hacking Discord server](https://discord.gg/6ryxnkS) (recommended)
{: .notice--info}
Do not attempt to install a Wii IOS or System Menu on the Wii mini. Doing so will likely [brick](bricks#ios-brick) your console.
{: .notice--warning}
This d2x cIOS installer was originally developed for the Wii U's vWii by DaveBaol and custom cIOS was created by Leseratte for the Wii mini. The original download page can be found [here](https://wii.leseratte10.de/d2xl-cIOS/). Leseratte's Github page can be found [here](https://github.com/Leseratte10/d2xl-cios). Please note that this cIOS is still experimental, though no problem with functionality has been reported.
{: .notice--info}
@ -34,9 +37,9 @@ This d2x cIOS installer was originally developed for the Wii U's vWii by DaveBao
1. Press continue, then set the options to the following:
```
Select cIOS: d2xl-v1-beta2
Select cIOS base: 57
Select cIOS slot: 249
Select cIOS <d2xl-v1-beta2>
Select cIOS base <57>
Select cIOS slot <249>
```
Take a note of the version number under notes (`IOS57-64-` ending in either `v31776` or `v31775`)
1. Once set, press A to install. Once done successfully, exit the installer.
@ -50,11 +53,5 @@ If you wish to use Wiimmfi with Ethernet on a Wii mini, you have to run the [Eth
The Wii and Wii mini consoles are only known to work with Ethernet adapters using the AX88772 chip. Please check that the product is compatible before you buy. This one from UGREEN is known to be compatible: [Amazon Europe](https://www.amazon.de/dp/B00MYT481C), [Amazon US](https://a.co/d/3OcSJDS)
{: .notice--info}
Do not attempt to install a Wii IOS or System Menu on the Wii mini. Doing so will likely brick your console.
{: .notice--warning}
You can now use homebrew such as [USB Loader GX](usbloadergx) and [WiiFlow](wiiflow).
{: .notice--info}
[Click here to go back to the site index.](site-navigation)
{: .notice--info}

View file

@ -4,9 +4,7 @@ title: "cIOS"
{% include toc title="Table of Contents" %}
This guide will show you how to install cIOS (custom IOS). This enables the usage of USB Loader GX and WiiFlow. Some homebrew might also work better using cIOS.
![d2x cIOS Installer](/images/cios/cIOS.png)
While [cIOS](https://wiibrew.org/wiki/Custom_IOS) has largely been supplanted by AHBPROT, which gives complete hardware access, it still has useful applications. For example, this enables the functionality of USB loaders like USB Loader GX and WiiFlow, alongside other pieces of homebrew like SaveGame Manager GX. You can skip this process if you want, but generally it extends your Wii with little to no downsides.
If you have a Wii mini, use [this](cios-mini) guide for cIOS instead. Attempting to install other cIOS on a Wii mini will not work.
{: .notice--warning}
@ -24,7 +22,7 @@ Ensure that if you are using an SD card, the lock switch is in the unlocked posi
#### Section I - Downloading (Only required if your Wii doesn't have Internet)
If your Wii has an Internet connection, you may skip this section.<br/>
If your Wii has an Internet connection, you may skip this section.<br>
However, If you encounter any errors like `tcp_read timeout` and `net_gethostbyname failed:`, this will allow the Wii to skip the downloading step.
{: .notice--warning}
@ -47,20 +45,25 @@ The WAD files should be on your SD card like this:
#### Section II - Installing
If `d2x-v11-beta1` isn't showing up, try select the cIOS base first, then check again. This can also happen if your SD card is locked.
{: .notice--info}
On each cIOS that you try to install, you will first be shown a grid of active IOS on the Wi. Simply press A again, and it will install. Then, you will be shown a results screen, just press A as well and go to the next cIOS.
{: .notice--info}
1. Download the d2x cIOS installer and extract the zip to the root of your SD card or USB drive.
1. Insert the SD card or USB drive into your Wii, and launch the d2x cIOS Installer from the Homebrew Channel
1. Press A to continue, then set the options to the following:
1. Insert the SD card or USB drive into your Wii, and launch the d2x cIOS Installer from the Homebrew Channel.
1. When asked what IOS you would like to use, select IOS 58. This should work in nearly all cases.
1. Now, you will install individual cIOS from 248-251. The exact settings needed are listed below.
+ cIOS 248 Installation
```
Select cIOS <d2x-v11-beta1>
Select cIOS base: 38
Select cIOS slot: 248
Select cIOS base <38>
Select cIOS slot <248>
Select cIOS version <65535>
```
If `d2x-v11-beta1` isn't showing up, try select the cIOS base first, then check again. This can also happen if your SD card is locked.
{: .notice--info}
![Install cIOS 248](/images/cios/d2x_v11_248.png)
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
+ cIOS 249 Installation
```
Select cIOS <d2x-v11-beta1>
Select cIOS base <56>
@ -68,8 +71,7 @@ The WAD files should be on your SD card like this:
Select cIOS version <65535>
```
![Install cIOS 249](/images/cios/d2x_v11_249.png)
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
+ cIOS 250 Installation
```
Select cIOS <d2x-v11-beta1>
Select cIOS base <57>
@ -77,8 +79,7 @@ The WAD files should be on your SD card like this:
Select cIOS version <65535>
```
![Install cIOS 250](/images/cios/d2x_v11_250.png)
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
+ cIOS 251 Installation
```
Select cIOS <d2x-v11-beta1>
Select cIOS base <58>
@ -86,7 +87,7 @@ The WAD files should be on your SD card like this:
Select cIOS version <65535>
```
![Install cIOS 251](/images/cios/d2x_v11_251.png)
1. Once set, press A twice again to install, and then exit once done.
[Click here to go back to the site index.](site-navigation)
[Continue to Recommended Homebrew](recommended-homebrew)<br>
This guide outlines selections of homebrew that we think are useful to have; these range from utilities to emulators and more.
{: .notice--info}

View file

@ -22,7 +22,9 @@ If you are dumping one of the 13 games on [this list](https://wiki.dolphin-emu.o
1. Insert your SD card into your Wii, and launch CleanRip from the Homebrew Channel.
1. Select your device that you will be dumping the game to - a USB device or SD card.
![Device type](/images/homebrew/CleanRip/2.png)
1. On this screen, CleanRip asks to download a file with game checksums to verify that the dump it creates is a 1:1 copy of the disc. It's recommended that you say `Yes` to this question, but it isn't required for a dump.
1. When prompted, select `Yes` to download the redump.org DAT files. This ensures that your dump is accurate.
You may get an exception error if you do this. If so, simply skip and verify your dump on Dolphin Emulator if needed.
{: .notice--warning}
![DAT](/images/homebrew/CleanRip/3.png)
1. Insert the game disc you would like to dump.
![DVD](/images/homebrew/CleanRip/4.png)
@ -36,7 +38,7 @@ If you are dumping one of the 13 games on [this list](https://wiki.dolphin-emu.o
#### Requirements
+ A Windows/Mac OS/Linux PC with an internet connection
+ A Windows/macOS/Linux PC with an internet connection
+ [DVD Dump Tool](/assets/files/DVDDumpTool.zip)
#### Instructions

View file

@ -27,6 +27,27 @@ In order to check what the error means, please visit the [Wiimmfi error page](ht
Run an Internet connection test by going to `Wii Settings > Internet > Connection settings > Connection > Test this connection`
#### Error 220602
##### For RiiConnect24 Users
You are using the old DNS server for RiiConnect24. Follow [this](riiconnect24#section-iv---connecting) guide for instructions on how to change it.
##### For non-RiiConnect24 Users
Your Primary DNS server is incorrect or not working.<br>
This can also happen if you use a proxy server and it is down.
#### Error 107304
##### For RiiConnect24 Users
If you get this error or you see Nintendo's User Agreement without RiiConnect24's logo, that means your ISP (Internet Service Provider) or network is blocking the use of RC24 DNS. You can set `Auto-Obtain DNS` to `On` to solve this. RiiConnect24 will still work without it. Or, you can use the [RiiConnect24 DNS-Server](https://github.com/RiiConnect24/DNS-Server/releases/latest) program.
##### For non-RiiConnect24 Users
If you get this error, the DNS server you chose or your internet as a whole is having issues. Try again later.
#### FORE000006
If you get error FORE000006, your Wii's clock is probably set incorrectly. See [this](wiiconnect24#updating-rtc-clock) on instructions for how to properly reset it. If this still fails, remove the Wii's clock battery (located on the bottom of the system behind a screw) for an hour and put it back in. Then, reset the Wii's clock.

View file

@ -22,7 +22,7 @@ Select the exploit that corresponds to your console and situation the best. If t
| Console Revision | Recommended Exploit |
| ----------------- | ------------------- |
| Wii/Wii Family Edition | If you can use an SD card: Proceed to [Letterbomb](letterbomb)<br> If you cannot use an SD card: Proceed to [str2hax](str2hax) |
| Wii/Wii Family Edition | If you can use a Windows PC:<br> Automatic Setup: Proceed to [ModMii](modmii)<br> If you can use an SD card:<br> Manual Setup: Proceed to [Wilbrand](wilbrand)<br> If you cannot use an SD card:<br> Manual Setup: Proceed to [str2hax](str2hax)<br> |
| Wii Mini | Proceed to [Bluebomb](bluebomb) |
| Wii U (vWii) | If you have not modded your Wii U yet:<br> Proceed to [Introduction (wiiu.hacks.guide)](https://wiiu.hacks.guide/#/)<br> If your Wii U is already modded:<br> Proceed to [vWii Modding (wiiu.hacks.guide)](https://wiiu.hacks.guide/#/vwii-modding) |
| Dolphin Emulator | Proceed to [Homebrew Channel on Dolphin](homebrew-dolphin) |

View file

@ -36,8 +36,6 @@ It is also safe to [redo any exploit](get-started) to get back into the HackMii
* [HackMii Installer v1.2](https://bootmii.org/download/)
To check if your Wii has Priiloader, hold the RESET button while turning it on.
![Turn on](/images/Priiloader/on.jpg)
![Hold RESET](/images/Priiloader/reset.jpg)
{: .notice--info}
#### Instructions

View file

@ -2,6 +2,8 @@
title: "Homebrew Channel and BootMii Installation"
---
{% include toc title="Table of Contents" %}
The Homebrew Channel is where you will go to launch homebrew applications.
BootMii is a piece of software that can backup and restore your Wii's NAND storage, and if installed in boot2, provides brick protection.

View file

@ -27,7 +27,7 @@ Here are some common examples of what homebrew can do for your Wii:
+ [Patch game disc contents](riivolution), allowing you to load game modifications.
+ Turn your Wii into a [media center](wiimc).
+ Install [themes](themes) both on the Wii Menu and on commonly used homebrew apps.
+ Install a [USB loader](usb-loader) to launch Wii games and more from an external storage device.
+ Install a [USB loader](usb-loaders) to launch Wii games and more from an external storage device.
+ Back up your [discs](dump-games) and [other installed titles](dump-wads).
+ [Back up and restore](wii-saves) your Wii save files.
+ [Back up and restore](gcsaves) your GameCube save files.

View file

@ -68,6 +68,13 @@ This page lays out different exploits that were used, or can still be used on th
+ Superceded by Wilbrand, or by updating to 4.3 and using Letterbomb and Bluebomb
+ [Wiibrew Page](https://wiibrew.org/wiki/Bannerbomb)
#### Letterbomb
+ Crashes the Wii Menu by exploiting an oversight in the Wii Message Board
+ Works on system menu version 4.3 ONLY
+ Superceded by Wilbrand, functionality remains the same but Wilbrand has wider support
+ [Wiibrew Page](https://wiibrew.org/wiki/LetterBomb)
#### FlashHax
+ Executes the chainloader via a web page in the Internet Channel

View file

@ -47,10 +47,9 @@ The expected structure for multi disc games is as follows:<br>
`device:/games/(game name) [game ID]/game.iso`<br>
`device:/games/(game name) [game ID]/disc2.iso` (so on and so forth)
Here is an example using The Legend of Zelda: The Wind Waker on a USB hard drive:
Here is an example using The Legend of Zelda: The Wind Waker on a USB hard drive:<br>
`USB:/games/The Legend of Zelda: The Wind Waker [GZLE01]/game.iso`
#### BIOS Setup
You can use an original GameCube BIOS in Nintendont if you have legally obtained one.

View file

@ -15,7 +15,7 @@ There are two methods to use the Open Shop Channel - on your Wii through the Hom
#### Requirements
+ A Windows/Mac OS/Linux computer with an internet connection
+ A Windows/macOS/Linux computer with an internet connection
+ An SD card or USB drive
+ [The Homebrew Browser](https://oscwii.org/library/app/homebrew_browser)
@ -30,7 +30,7 @@ There are two methods to use the Open Shop Channel - on your Wii through the Hom
#### Requirements
+ A Windows/Mac OS/Linux computer with an internet connection
+ A Windows/macOS/Linux computer with an internet connection
+ An SD card or USB drive
+ The latest version of [OSCDL](https://github.com/dhtdht020/osc-dl/releases/latest)
@ -46,15 +46,19 @@ There are two methods to use the Open Shop Channel - on your Wii through the Hom
1. A `.zip` file containing your app should download wherever you specified the directory to be. Simply extract the `apps` folder in this archive to the root of your SD card or USB drive.
1. Insert your SD card or USB drive into your Wii, and go to the Homebrew Channel. Your downloaded piece of homebrew should now display.
#### Instructions for Mac OS/Linux
#### Instructions for macOS/Linux
UNDER CONSTRUCTION
If you have made it to this point, congrats! You are finished with the required section of the main guide! You can continue reading past this point, but bear in mind that the following steps are optional.
{: .notice--success}
[Continue to Recommended Homebrew](recommended-homebrew)<br>
This guide outlines selections of homebrew by the guide staff that are notable for being useful, nice to have, or flat out good in a way that warrants a recommendation.
If using a Wii: [Continue to cIOS](cios)<br>
This guide provides steps on how to get a basic set of cIOS installed on your Wii, enabling functionality on apps like USB loaders.
{: .notice--info}
If using a Wii mini: [Continue to Wii mini cIOS](cios-mini)<br>
This guide provides installation instructions for cIOS on Wii minis.
{: .notice--info}
[Return to site index](site-navigation)<br>

View file

@ -2,6 +2,8 @@
title: Recommended Homebrew
---
{% include toc title="Table of Contents" %}
This page outlines homebrew that are recommended by the wii.hacks.guide staff for being useful, nice to have, or just flat out good. Take full advantage of the power you now have with your Wii!
Homebrew that has the ability to make permanant changes to your Wii are highlighted in **bold**.

View file

@ -18,7 +18,7 @@ Recovery Mode is a last resort method for recovering your Wii console from a bri
+ If the Diagnostic Disc Check was not previously removed with Priiloader, and no drive chip is on hand:
+ Super Smash Bros. Melee ([Smash Stack](legacy-exploits#smash-stack))
+ An original revision Nintendo Wii (Family Edition Wiis will not work due to the lack of GameCube ports - otherwise you must solder some on)
+ A Windows/Mac OS/Linux PC with an Internet connection
+ A Windows/macOS/Linux PC with an Internet connection
+ An SD Card formatted to FAT32
#### Preparation

View file

@ -4,15 +4,11 @@ title: "RiiConnect24"
{% include toc title="Table of Contents" %}
![RiiConnect24 Logo](/images/riiconnect24/WiiRC24Logo.jpg)
For support (in English) with RiiConnect24, as well as RiiTag, join [RiiConnect24 on Discord](https://discord.gg/rc24).
{: .notice--primary}
[RiiConnect24](https://rc24.xyz/) allows you to use discontinued services from WiiConnect24, which include the News, Forecast, Everybody Votes, Nintendo and Check Mii Out Channel, along with Wii Mail.
<div class="notice--warning">{{ notice-1 | markdownify }}</div>
It's recommended to set your Wii to the current time before proceeding. Follow [this tutorial](rtc) in order to set it.
{: .notice--warning}
@ -24,20 +20,22 @@ DO NOT INSTALL RIICONNECT24 ON A WII MINI! It will not work and it will brick th
If you are on vWii, you will also need [Priiloader](priiloader) installed with the WC24 hacks.
{: .notice--primary}
* An SD card or USB drive
* A Wii with an Internet connection
* A computer
* [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/riiconnect24/RiiConnect24-Patcher/releases)
* [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)
+ An SD card or USB drive
+ A Wii with an Internet connection
+ A PC with an Internet connection
+ [RiiConnect24 Patcher (Windows, Mac and Linux)](https://github.com/riiconnect24/RiiConnect24-Patcher/releases)
+ [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)
### Instructions
#### Section I - Using RiiConnect24 Patcher
1. Click the link above to go to the GitHub page where the patcher is.
1. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
1. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
1. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a macOS/Linux system.
1. Run the RiiConnect24 patcher.
+ On Windows run `RiiConnect24Patcher.bat`.
+ On macOS/Linux systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash <directory>/<directory>/RiiConnect24Patcher.sh`.
1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`.
![RiiConnect24 Patcher Main Screen](/images/riiconnect24/patcher/1.JPG)
1. Select the device you're patching for.
![Select your device](/images/riiconnect24/patcher/2.JPG)
@ -53,16 +51,16 @@ If you are on vWii, you will also need [Priiloader](priiloader) installed with t
![Enable copying to SD Card](/images/riiconnect24/patcher/7.JPG)
1. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
![Successfully detected](/images/riiconnect24/patcher/8.JPG)
1. Be patient...
1. The patcher will download apps now - please be patient.
![It's patching!](/images/riiconnect24/patcher/9.JPG)
1. After it's done, you can send anonymous feedback to RiiConnect24. If you don't want to, close the patcher. All the files should already be on your SD Card.
1. Once you reach the screen that says `Patching done`, you can exit the patcher. All the files should already be on your SD card.
![It's done!](/images/riiconnect24/patcher/10.JPG)
![Files copied](/images/riiconnect24/patcher/11.PNG)
1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` or `RiiConnect24Patcher.sh` to your SD Card or USB Device.
#### Section II - Installing WADs
If you are using Dolphin, you are finished the guide. Install the WADs by going to `Tools -> Install WAD` within Dolphin.
If you are using Dolphin, you have finished the guide. Install the WADs by going to `Tools -> Install WAD` within Dolphin.
{: .notice--primary}
You will now install the patched IOS and Channel WADs that are required to use RiiConnect24.
@ -82,15 +80,20 @@ You will now patch your `nwc24msg.cfg` file which is required in order to use Wi
1. Launch RiiConnect24 Mail Patcher.
1. It should only take a few seconds to patch your nwc24msg.cfg. When it's done, press the HOME Button to exit.
#### Section IV - Connecting
#### Section IV - Connecting to RiiConnect24
{% capture notice-1 %}
The old DNS server `164.132.44.106` has been deprecated as of `June 1st, 2023` and is no longer available to use.
{% endcapture %}
{: .notice--warning}
<div class="notice--warning">{{ notice-1 | markdownify }}</div>
If you're getting errors such as `WiiConnect24 and Wii Shop Channel currently not being offered in your country`, go to Wii Settings -> Last Page -> Country and change it to United Kingdom. You will get this error when using a country that RiiConnect24 does not support.
{: .notice--warning}
You will now set your DNS to RiiConnect24 servers. This is optional but it's recommended, because it enhances the use of RiiConnect24 and Wiimmfi by making some other features available.
If you get error 107245, you did not install the patched IOS.<br>
If you get error 220602, see [this](faq#for-riiconnect24-users) page.<br>
If you get error 107304, see [this](faq#for-riiconnect24-users-1) page.<br>
{: .notice--warning}
You will now set your DNS to RiiConnect24 servers. This is optional but recommended, because it enhances the use of RiiConnect24 and Wiimmfi by making some other features available.
1. Go to `Wii Options`.
1. Go to `Wii Settings`.
@ -109,18 +112,6 @@ You will now set your DNS to RiiConnect24 servers. This is optional but it's rec
1. At `Slot Illumination`, it is recommend you set the disc light to `Dim` or `Bright`, but this is optional.
1. Finally, go to the `Internet` section, then `User Agreements` or `Agreement/Contact`, then `Yes`. Please read through this.
If you get error 107245, then you have not installed the patched IOS. Make sure you install IOS31 and IOS80 with YAWM ModMii Edition, along with any other patched WADs.
{: .notice--warning}
If you get error 220602 when loading the User Agreements, it means your Wii is still configured to use the old DNS server, which has been shut down on `June 1, 2023`. [Read more here.](riiconnect24-dns-update)
{: .notice--warning}
If you get error 107304 or you see Nintendo's User Agreement without RiiConnect24's logo, that means your ISP (Internet Service Provider) or network is blocking the use of a DNS. You can set `Auto-Obtain DNS` to `On` to solve this. RiiConnect24 will still work without it. Or, you can use the [RiiConnect24 DNS-Server](https://github.com/RiiConnect24/DNS-Server/releases/latest) program.
{: .notice--warning}
If you're getting errors such as `WiiConnect24 and Wii Shop Channel currently not being offered in your country`, go to Wii Settings -> Last Page -> Country and change it to United Kingdom. You will get this error when using a country that RiiConnect24 does not support.
{: .notice--warning}
[Return to WiiConnect24](wiiconnect24)
{: .notice--info}

View file

@ -12,8 +12,6 @@ If you want to use Riivolution on a Wii mini, a WiFi card must be soldered and W
Riivolution requires a working disk drive and a clean physical copy of the disk the desired mod is for. Scratched disks may or may not work very well or at all.
{: .notice--info}
![Riivolution](/images/homebrew/riivolution/riivolution.png)
### Requirements

View file

@ -4,8 +4,6 @@ title: "Installing RSSMii"
{% include toc title="Table of Contents" %}
![RSSMii](/images/homebrew/rssmii/rssmii.png)
This guide provides instructions on installing RSSMii, a homebrew app that parses RSS feeds from your SD card and sends them to your Wii Menu.
Due to the nature of RSS feeds and the large amount of mail they can generate, this app has a larger than zero chance of [bricking](bricks#mail-brick) your Wii. Consider using News Channel from a WiiConnect24 revival provider instead, and request an addition to their service should you find out that your intended RSS feed isn't being provided. If you decide to use RSSMii anyway, limit the number of feeds you subscribe to.

View file

@ -1,124 +0,0 @@
---
title: "Installing Wii Menu Themes on vWii"
---
{% include toc title="Table of Contents" %}
Are you tired of the boring, plain white theme on your Wii Menu, and want a cool theme instead? This tutorial will help you get a new theme for your Wii Menu!
Installing a theme after installing Priiloader WILL BRICK YOUR VWII.
{: .notice--danger}
We are **NOT** responsible if you brick, or damage your console in any way whatsoever. If you follow this guide exactly, you shouldn't have any problems.
{: .notice--danger}
Do **NOT** install the themes made in this guide on an actual Wii. They are only compatible with the vWii System Menu and will brick an actual Wii.
{: .notice--danger}
There are some themes that aren't compatible with the vWii System Menu, they may result in anything from graphical glitches to a full theme brick. We recommend only using themes from [rc24.xyz/goodies/themes](https://rc24.xyz/goodies/themes/) since these are compatible with modern versions of the System Menu.
{: .notice--warning}
If you somehow happen to brick your vWii, [follow this guide](https://gbatemp.net/threads/guide-vwii-unbrick-guide-by-garyodernichts.528329). ([Archive](https://web.archive.org/web/20200213194233/https://gbatemp.net/threads/guide-vwii-unbrick-guide-by-garyodernichts.528329/))
{: .notice--info}
#### Requirements
* A Wii U with the Homebrew Channel installed.
* An SD card or USB drive
* A computer with Windows on it (or using Mono or Wine on Mac/Linux)
* [MyMenuifyMod](https://oscwii.org/library/app/MyMenuifyMod)
* [ThemeMii Mod](/assets/files/New_ThemeMii_MOD.zip)
* [NUS Downloader (vWii)](/assets/files/NUSDownloader-vwii.zip)
#### Theme Links
Below are some links to themes.
* [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
* [Wii Themer](http://www.wiithemer.org/)
* [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
Only themes from the RiiConnect24 Themes page have been tested on vWii.
Themes from other sources may not be entirely compatible with vWii, use these at your own risk.
{: .notice--warning}
MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
{: .notice--danger}
#### Instructions
##### Section I - Finding a Theme
* When choosing a theme, it is important to make sure that your theme is compatible with the vWii System Menu.
* Older themes for 3.X or 2.X are **NOT** compatible with vWii and may cause a brick if used.
* Most of the themes on RiiConnect24's theme page have been tested on vWii and they are known to work.
##### Section II - Downloading .app files
This assumes your vWii is on the latest Wii Menu version.
{: .notice--warning}
There are a couple of ways to get the .app files for your vWii System Menu, in this guide we'll be using the vWii version of NUS Downloader.
1. Extract the .zip file for NUS Downloader vWii and open the application
1. Click on `Database...`
1. Go to `System` > `System Menu` and select the version corresponding to your region as shown in the table below.
| Region | vWii Menu version |
| --------- | -------------------- |
| Japan | v608 |
| USA | v609 |
| Europe | v610 |
After selecting the correct version to download, check the box for `Create Decrypted Contents (*.app)`. Then, press the `Start NUS Download` Button on the top of the window.
![The database menu in NUS Downloader.](/images/themes-vwii/NUSD-vWii_preview-database.png)
![The main menu of NUS downloader without the database menu open.](/images/themes-vwii/NUSD-vWii_sysmenu-versions.png)
After the download has finished, search for the .app file corresponding to your region in the folder where NUS Downloader is.
| Region | .app file for your region |
| --------- | ------------------------- |
| Japan | 0000001c.app |
| USA | 0000001f.app |
| Europe | 00000022.app |
If you can't find the .app file, it's possible you have downloaded the wrong version of the Wii Menu and you'll need to try again.
After you find the .app file, copy it to the main directory of the folder containing ThemeMii. Then, copy a version of it to the theme folder in your SD card.
##### Section III - Building the Theme
1. Launch ThemeMii Mod.
1. Do not click `Download Base App`, ThemeMii does not have base .app files for vWii. If you download a base app, you must delete it in order to use the vWii .app file.
1. In ThemeMii select `File` -> `Open` and navigate to the .mym theme you downloaded earlier.
1. Click on `Create CSM` and select the .app file that you copied to the ThemeMii folder.
1. Now navigate to the `theme` folder on your SD card and save your theme with the .csm extension.
![ThemeMii Menu](/images/themes-vwii/ThemeMii-Mod-Preview_vWii.png)
##### Section IV - Installing the Theme
1. Eject your SD card from your PC and put it into your Wii U.
1. Start the Homebrew Channel and launch MyMenuifyMod.
1. Select the .csm file you just created.
1. When it prompts you to install the theme say `Yes`, and wait for it to finish.
1. When it finishes installing, MyMenuifyMod will prompt you to either `Continue` or `Exit`, choose `Exit`.
If you did everything correctly, you should now have your custom theme installed on your Wii Menu.
##### Reverting to Original Theme
1. Launch the Homebrew Channel.
1. Launch MyMenuify and navigate to your theme folder.
1. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
1. Select Install and wait until it finishes.
1. When it's done, you can exit MyMenuify.
[Click here to go back to the site index.](site-navigation)
{: .notice--info}

View file

@ -9,29 +9,102 @@ This guide is intended to be the last you will ever need when it comes to themin
DO NOT CONTINUE WITH THIS GUIDE UNLESS YOU HAVE ADEQUATE BRICK PROTECTION, SPECIFICALLY [BOOTMII](bootmii) AND [PRIILOADER](priiloader)!
{: .notice--danger}
MyMenuifyMod has built in safety features to prevent from installing bad or corrupt Wii Menu themes, please opt to use it as it is one of the safest methods of installing them.
MyMenuifyMod has built in safety features to prevent from installing bad or corrupt Wii Menu themes, so please opt to use it instead of other theme installation homebrew.
{: .notice--warning}
Do not use any other version of ThemeMii than the one linked here, as ThemeMii Mod allows you to make a theme for Wii Menu version 4.3, other versions may not.
{: .notice--warning}
### Wii Menu Themes
### Wii Menu Theming
Only install themes on your Wii that have been formatted specifically for it, and its current region. Installing themes from the wrong region or version on your Wii will cause a [brick](bricks#theme-brick). This tutorial will tell you how to create a .csm file that is safe to install.
Only install themes on your Wii that have been formatted specifically for its version and current region. Installing themes from the wrong version or region on your Wii will cause a [brick](bricks#theme-brick). This tutorial will tell you how to create a .csm file that is safe to install.
{: .notice--danger}
### Wii Menu (vWii) Themes
Before proceeding, it helps to know the difference between .MYM and .CSM as file formats when used in Wii Menu theming. While the MYM is made by the theme creator which can then be shared around, the CSM is the result from building a MYM into a system menu. In other words, MYM mainly just holds assets - the actual system menu itself that needs to be installed comes seperate.
{: .notice--info}
### WiiFlow Lite Themes
#### Theme Sources
### USB Loader GX Themes
### Homebrew Channel Themes
+ [Wii Theme Team Creations](https://gbatemp.net/threads/wii-theme-team-creations.260327/) (.mym file distribution)
+ [Wii Theme Google Drive](https://drive.google.com/drive/folders/1H8bKkZa5Nwy7tBmDvKEVXhoZStucpUr3) (.mym file distribution)
+ [GBAtemp Other Files for Wii](https://gbatemp.net/download/categories/other-files.166/) (.mym file distribution)
+ [Wii Themer](http://www.wiithemer.org/) (online theme builder for specific versions and regions, ready to install .csm themes)
#### Requirements
+ A modded Wii
+ An SD card or USB device
+ A Linux/Mac OS/Windows PC with an internet connection
+ A Windows/macOS/Linux PC with an Internet connection
+ [MyMenuifyMod](https://oscwii.org/library/app/mymenuifymod)
+ [ThemeMii Mod](/assets/files/New_ThemeMii_MOD.zip)
#### Building a Theme
If you don't want to go through the hassle of using an external program to build a theme, you can also download a prebuilt theme from Wii Themer and skip to [Theme Installation](themes#theme-installation).
1. Once you download the theme you want and double-check that you have the right one for your system menu version and region, extract the .zip file for ThemeMii Mod and open the application.
1. Go to `Tools` > `Download Base App` > `Version of your Wii Menu` > `Region of your Wii Menu`.
1. A dialog box will pop-up asking you to enter in a value to create a key. Enter what it says, and it will create a key that will be used to decrypt the Wii Menu contents from Nintendo's servers.
1. A file selection box will ask you where to save the .app file (that is the Wii Menu content file that it downloaded). Save it to the directory where ThemeMii is in.
1. Go to `File` > `Open`, then browse for where your .mym file is.
1. Press `Create csm`, then browse for a directory you want to save the theme in. Give it a moment to build the theme.
1. A dialog box will pop up asking you if you want to save the .mym. Press `No`.
#### Theme Installation
1. Install MyMenuifyMod.
1. Create a new directory on your SD card or USB device called `modthemes` if it does not already exist.
1. Copy the theme file to the storage medium under the `modthemes` directory.
1. Put the storage medium in your Wii and boot it up.
storage medium, and you should see a selection of your themes.
1. Go into MyMenuifyMod, and acknowledge the disclaimer. It will ask what IOS you want to use in the app. Select `IOS58`.
If you get `Exception DSI occured!`, press RESET on your Wii and try again.
{: .notice--info}
1. Select your storage medium, and you should now see a selection of your themes.
![Theme Selection](/images/themes/mym-theme-selection.png)
1. Select the theme you would like to install. If it is signed, MyMenuifyMod will indicate it to you, otherwise it will warn you. Be absolutely sure at this point that you have downloaded the correct theme for your system menu version and region.
1. Install the theme.
1. Reboot into the Wii Menu, and see if the theme successfully installed. If all goes well, you will have a result similar to the below!
![Theme Ready](/images/themes/themed-wii-menu.png)
### WiiFlow Lite Theming
Unfortunately, because of the codebase difference between the original WiiFlow and the newer WiiFlow Lite, themes are sparse - in fact, only one theme could be found that confidently works on the newer version. The instructions for installing that theme are below.
#### Requirements
+ A modded Wii
+ An SD card or USB device
+ [WiiFlow Lite](usb-loaders#wiiflow-lite)
+ A Linux/macOS/Windows PC with an Internet connection
+ [Rhapsodii Shima](https://gbatemp.net/threads/rhapsodii-shima-5-4.555062/)
#### Instructions
1. Have the storage device that holds WiiFlow Lite connected to your PC.
1. Download the Rhapsodii Shima archive, either version of the theme works and can be installed side-by-side with no issues.
1. Extract and copy the `wiiflow` folder to the root of your storage device, merge all folders and overwrite all files when requested.
1. Follow the theme setup and theme configuration instructions in `installation.txt`. Enjoy the theme!
### USB Loader GX Theming
#### Requirements
+ A modded Wii
+ An SD card or USB device
+ [USB Loader GX](usb-loaders#usb-loader-gx)
+ A Linux/macOS/Windows PC with an Internet connection
+ A [theme](https://gbatemp.net/threads/dark-wii-usb-loader-gx-themes.584493/), this link contains an assortment of dark themes
#### Instructions
1. Download a theme `.zip` file from the website linked above, or anywhere else you can get a proper theme.
1. Unpack the `.zip` file's contents into the `apps\usbloader_gx` directory on the storage device where you installed USB Loader GX.
1. Put the storage medium in your Wii and boot it up.
1. Start USB Loader GX, go to the `Settings` menu, and then go to `Theme Menu`.
1. Open the theme and install it.
### Homebrew Channel Theming
#### Requirements
+ A modded Wii
+ An SD card or USB device
+ A Linux/macOS/Windows PC with an internet connection
+ A [theme](https://wiibrew.org/wiki/Homebrew_Channel/Themes) from WiiBrew
#### Instructions
@ -47,63 +120,10 @@ Only install themes on your Wii that have been formatted specifically for it, an
1. The theme should now be loaded, enjoy!
![Enjoy Theme](/images/themes/homebrew-channel-theme-done.png)
### App Forwarders
### Requirements
App forwarders can add a bit of extra flair to your Wii Menu - but be careful with them as bad forwarders can cause a [banner brick](bricks#banner-brick). Generally, you can find forwarders on places like [GBAtemp](https://gbatemp.net/threads/wii-forwarder-repository.588781/) for popular apps such as emulators. Since forwarders come in a .WAD format, the process of installing them is as simple as normal usage with [YAWM ModMii Edition](yawmme).
* A Wii
* An SD card or USB drive
* A computer with Windows on it (or using Mono or Wine on Mac/Linux)
* [MyMenuify Mod](https://oscwii.org/library/app/MyMenuifyMod)
* [ThemeMii Mod](/assets/files/New_ThemeMii_MOD.zip)
### Theme Links
Below are some links to themes.
* [RiiConnect24 Themes Page](https://rc24.xyz/goodies/themes/)
* [GBAtemp Download](https://gbatemp.net/download/categories/other-files.166/)
* [Google Drive Repository](https://drive.google.com/drive/folders/1K1WQe36bGibsF4ZlAxZKU6ngNpjUnh5i)
* [Wii Themer](http://www.wiithemer.org/)
* [Wii Theme Team Creations v2](https://gbatemp.net/threads/wii-theme-team-creations-v2.336596/)
MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
{: .notice--danger}
### Instructions
#### Section I - Finding a Theme
* Find a theme you want to install. Some themes have YouTube videos to show what the theme looks like, but unfortunately some of the videos are no longer available.
* Once you found one you like, click the download link corresponding to your Wii Menu version. **It's very important to pick the correct version to avoid bricks.**
* You probably will pick the download link that says 4.X, that means the theme will work on version 4.1, 4.2 and 4.3 of the Wii Menu.
* Some themes have different links for different regions, so pick the one corresponding to your Wii's region.
* There are other resources for Wii Menu themes, but they might be in csm form (ready to install on the Wii). If the csm doesn't match the version and region of your Wii Menu, try to convert it to mym with ThemeMii Mod, and then convert it back to csm with the instructions here using the version and region of your Wii Menu.
* Once you downloaded the theme you want and double-checked you got the right one, extract the .zip file for ThemeMii Mod and open the application.
#### Section II - Building the Theme
1. A dialog box will pop up telling you to only install themes if you have brick protection. If you installed Priiloader and/or BootMii (see the warning at the start of this guide), press OK.
1. Go to `Tools` > `Download Base App` > Version of your Wii Menu > Region of your Wii Menu
1. A dialog box will pop up asking you to enter in a value to create a key. Enter in what it says, it will create a key that will be used to decrypt the Wii Menu contents from Nintendo's servers.
1. A file selection box will ask you where to save the .app file (that is the Wii Menu content file it downloaded). Save it to the directory where ThemeMii is in.
1. Go to `Options` > `Standard System Menu` > Version of your Wii Menu > Region of your Wii Menu
1. Go to `File` > `Open`, then browse for where your .mym file is.
1. Press `Create csm`, then browse for a directory you want to save the theme in. Give it a moment to build the theme.
1. A dialog box will pop up asking you if you want to save the .mym. Press `No`.
#### Section III - Installing the Theme
1. Extract MyMenuifyMod.zip to your SD card or USB drive.
1. Put the .csm file you saved in a folder called `modthemes` on your SD card or USB drive.
1. Insert your SD card or USB drive into your Wii.
1. Launch MyMenuify Mod from the Homebrew Channel.
1. After an introduction message, it will ask you what IOS you want to use in the app. If you have [installed cIOS](cios), use `IOS249`, or else use `IOS58`. If the former gives an `Exception DSI occurred!` error, press Reset on the Wii console, launch it again, then try `IOS250`. It might take a couple attempts to reload the IOS.
1. Highlight the theme you want to install, then press A. Give it a moment to install the theme, then press any button to go to the Wii Menu. Hopefully, the theme installed correctly.
If you get an error saying "The system files are corrupted" or a black screen, don't panic as long as you installed Priiloader. Turn off your Wii, then hold down the RESET button down and turn on your Wii. You should be able to boot into the Priiloader menu, where you have some options to fix your Wii Menu. One of the options is to launch the Homebrew Channel, where you can launch MyMenuify Mod and press a button to download and install the original Wii Menu theme.
{: .notice--info}
[Click here to go back to the site index.](site-navigation)
{: .notice--info}

View file

@ -21,7 +21,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.
#### Section I - Downloading
Your Wii must be modded in order to perform this. If it isn't, then it's best to follow [the guide](get-started) first before doing this.
Your Wii must be modded in order to perform this. If it isn't, then it's best to follow [the guide](get-started) first.
{: .notice--info}
1. Extract the .zip file for NUS Downloader Wii and open the application.

View file

@ -2,7 +2,9 @@
title: "USB Loaders"
---
This guide will introduce you to USB loaders on the Wii. They can be primarily used to load game backups that were dumped from a retail game disc. Depending on the loader, there may also be extensions to allow it to function as a frontend for non-Wii games as well. The two most commonly used loaders are USB Loader GX and WiiFlow Lite (a regularly updated mod of the original WiiFlow) - one loader may work better for you than the other, so it's worth trying both out.
{% include toc title="Table of Contents" %}
This guide introduces USB loaders on the Wii. They can be primarily used to load game backups that were dumped from a retail game disc. Depending on the loader, there may also be extensions to allow it to function as a frontend for non-Wii games as well. The two most commonly used loaders are USB Loader GX and WiiFlow Lite (a regularly updated mod of the original WiiFlow) - one loader may work better for you than the other, so it's worth trying both out.
**Note about Configurable USB Loader:**<br>
Due to the age and lack of support for Configurable USB Loader (last update was in 2011), this guide does not provide dedicated installation instructions. If enough demand is there, it may be added in the future.
@ -30,6 +32,15 @@ Forwarders to open these loaders on the Wii Menu can be found on the Open Shop C
+ USB Loader GX still recieves regular updates.
![USB Loader GX UI](/images/usb-loaders/usbloadergx-ui.png)
### Game Directory Structure
```
💾 SD Card or USB Drives
| ╸📁 wbfs
| ╸📁 GameName [GameID]
| ╸📄 GameID.wbfs
```
### WiiFlow Lite
#### Requirements
@ -146,7 +157,7 @@ To change the cIOS used for a specific game, follow the instructions specific to
+ Try using 250 or 251, if 249 doesn't work.
1. Press OK and try to load the game.
#### WiiFlow
#### WiiFlow Lite
1. Select the game that isn't working.
1. Click the gear icon.
1. Go to cIOS and use the arrows to select the IOS slot to use.

View file

@ -2,41 +2,48 @@
title: "WiiConnect24"
---
{% include toc title="Table of Contents" %}
This guide provides different means of regaining WiiConnect24 functionality on your console. Although not at all nessecary, it is a "nice to have" feature that was originally used for online connectivity in certain applications on the console. These apps include the Forecast/News Channel, Nintendo Channel, Check Mii Out Channel, some Japan-exclusive channels, and more. Please bear in mind, the functionality you gain depends entirely on what service(s) you use.
### Service Overview
#### Note about service compatability:
Both services listed below are compatible with one another and can be loaded on the same console. With this said, it should be noted that when installing one channel over the other (WiiLink's Forecast Channel over RiiConect24's Forecast Channel for example), the channel you are installing will overwrite the old one.
Both services listed below are compatible with one another and can be loaded on the same console. With this said, it should be noted that when installing one channel over the other (WiiLink's Forecast Channel over RiiConnect24's Forecast Channel for example), the channel you are installing will overwrite the old one.
#### Service Support Status
✅ - In support<br>
⚠️ - In development<br>
⛔ - No support
| Service Name | WiiLink | RiiConnect24 |
| ------------ | ------- | ------------ |
| Forecast Channel | ✅ | ✅ |
| News Channel | ⚠️ | ✅ |
| Wii Mail | ⚠️ | ✅ |
| Everybody Votes Channel | ✅ | ✅ |
| Nintendo Channel | ✅ | ✅ |
| Check Mii Out Channel | ⚠️ | ✅ |
| Wii Room | ✅ | ⛔ |
| Food Channel | ✅ | ⛔ |
| Photo Prints Channel | ✅ | ⛔
| Kirby TV Channel | ✅ | ⛔ |
#### WiiLink
A newer WC24/Japanese channel revival service that started in 2020, but is rapidly regaining functionality in many different channels. The channels that are revived are listed below:
+ Japan Exclusive
+ Wii no Ma (Wii Room)
+ Demae Channel (Food Channel) (Real world ordering on specific version, US and CA only with Dominos Pizza)
+ Digicam Print Channel (Photo Prints Channel)
+ Kirby TV Channel
+ Global WiiConnect24
+ Forecast Channel ONLY
+ Nintendo Channel
+ Everybody Votes Channel
A newer WC24/Japanese channel revival service that started in 2020, but is rapidly regaining functionality in many different channels.
Service support status can be found [here](https://www.wiilink24.com/status).<br>
Their guide can be found [here](https://www.wiilink24.com/guide/1welcome/).
#### RiiConnect24
The oldest extant WC24 revival service, currently only with support for the worldwide WC24 channels as well as mail services. These are listed below:
+ Forecast/News Channel
+ Everybody Votes Channel
+ Check Mii Out Channel
+ Nintendo Channel
+ Wii Mail
The longest lasting WC24 revival service, currently only with support for the worldwide WC24 channels as well as mail services.
Service support status can be found [here](https://rc24.xyz/stats/).<br>
RiiConnect24 currently does not have a self-hosted guide, however you can find ours [here](riiconnect24).
## Updating RTC Clock
If you choose to install either of these services on your Wii, it is advised to synchronize its external clock in order to prevent various issues that may arise otherwise. The steps to do so can be found below:
### Updating RTC Clock
If you choose to install either of these services on your Wii, it is advised to synchronize its external clock in order to prevent various issues (such as inability to use said services) that may arise otherwise. The steps to do so can be found below:
#### What you need
+ A working Internet connection on your Wii

View file

@ -151,7 +151,7 @@ A method for Wiimmfi patching which runs on game disc images, but must be manual
#### Requirements
+ A Linux/Mac OS/Windows PC with an internet connection
+ A Linux/macOS/Windows PC with an internet connection
+ A copy of the game you want to patch - supported formats are `ISO`, `WDF`, `WIA`, `CISO (=WBI)`, `WBFS`, `GCZ`, and `FST` - `NKIT` is NOT supported
+ [Wiimmfi ISO Patcher](https://download.wiimmfi.de/patcher/wiimmfi-patcher-latest.zip)

View file

@ -4,8 +4,6 @@ title: "YAWM ModMii Edition"
{% include toc title="Table of Contents" %}
![yawmME icon](/images/homebrew/yawmME/icon.png)
YAWM ModMii Edition is an application that can install WADs and launch homebrew applications.
This tutorial will show you how to install WADs.

Binary file not shown.

After

Width:  |  Height:  |  Size: 633 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 723 KiB