New Crowdin updates (#388)
This commit is contained in:
KcrPL
GitHub
parent
6bcbd213b9
commit
5efb348038
194 changed files with 2358 additions and 1490 deletions
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Inhaltsverzeichnis" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
Solltest du hinsichtlich dieses Tutorials Hilfe benötigen, trete bitte dem [RiiConnect24 Discord-Server](https://discord.gg/rc24) bei (empfohlen), oder kontaktiere uns [per E-Mail unter support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Voraussetzungen
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Anleitung
|
#### Anleitung
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Abschnitt 1 - Herunterladen/Installieren
|
##### Abschnitt 1 - Herunterladen/Installieren
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Abschnitt 2 - Priiloader installieren
|
##### Abschnitt 2 - Priiloader installieren
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Wähle deine Region. 
|
7. Wähle deine Region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,16 +37,18 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Handlungsempfehlungen beim Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
- [Homebrew Browser](hbb)
|
- [Homebrew Browser](hbb)
|
||||||
- [Homebrew-Kanal](hbc)
|
- [Homebrew Channel](hbc)
|
||||||
- [LetterBomb](letterbomb)
|
- [LetterBomb](letterbomb)
|
||||||
- [ModMii](modmii)
|
- [ModMii](modmii)
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -26,9 +26,8 @@ Una de las funciones más importantes de BootMii es la capacidad de copiar y res
|
||||||
Si has instalado BootMii como boot2, apaga y vuelve a encender la consola para iniciarlo, y luego salta al paso 3.
|
Si has instalado BootMii como boot2, apaga y vuelve a encender la consola para iniciarlo, y luego salta al paso 3.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Inicia el Canal Homebrew.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Presiona el botón HOME y selecciona `Lanzar BootMii`.
|
|
||||||
|
|
||||||
Si la opción `Lanzar BootMii` no aparece, por favor [vuelve a iniciar el HackMii Installer](hackmii) e instala BootMii.
|
Si la opción `Lanzar BootMii` no aparece, por favor [vuelve a iniciar el HackMii Installer](hackmii) e instala BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,23 +38,23 @@ BootMii no es compatible con el Wii Remote. Para controlar la interfaz, deberás
|
||||||
Si después de seguir los pasos anteriores, la pantalla se queda en negro y la luz de la ranura para discos comienza a parpadear, significa que faltan los archivos de BootMii que van en la tarjeta SD, o están dañados. Para solucionar este problema, descarga [este archivo ZIP](https://static.hackmii.com/bootmii_sd_files.zip), extrae su contenido a la raíz de la tarjeta SD, y luego vuelve a intentarlo.
|
Si después de seguir los pasos anteriores, la pantalla se queda en negro y la luz de la ranura para discos comienza a parpadear, significa que faltan los archivos de BootMii que van en la tarjeta SD, o están dañados. Para solucionar este problema, descarga [este archivo ZIP](https://static.hackmii.com/bootmii_sd_files.zip), extrae su contenido a la raíz de la tarjeta SD, y luego vuelve a intentarlo.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Selecciona el botón de opciones (el que tiene dos engranajes).
|
1. Selecciona el botón de opciones (el que tiene dos engranajes).
|
||||||
|
1. Elige el botón de BackupMii (el que tiene una flecha verde).
|
||||||
4. Elige el botón de BackupMii (el que tiene una flecha verde).
|
|
||||||
|
|
||||||
- A continuación se empezará a crear el respaldo de la NAND. Puedes ver el progreso en pantalla.
|
- A continuación se empezará a crear el respaldo de la NAND. Puedes ver el progreso en pantalla.
|
||||||
- Los bloques defectuosos (que se muestran en negro) son normales, así que no te preocupes si ves algunos mientras se genera el respaldo.
|
- Los bloques defectuosos (que se muestran en negro) son normales, así que no te preocupes si ves algunos mientras se genera el respaldo.
|
||||||
- Después de que el respaldo haya sido creado, este será analizado en busca de errores. Este paso es opcional y puedes saltarlo pulsando el botón EJECT de la consola, aunque se recomienda realizarlo. Ten en cuenta que si tienes un disco insertado, presionar EJECT lo expulsará.
|
- Después de que el respaldo haya sido creado, este será analizado en busca de errores. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. Una vez que el proceso haya finalizado, vuelve al menú anterior pulsando cualquier botón.
|
1. Una vez que el proceso haya finalizado, vuelve al menú anterior pulsando cualquier botón.
|
||||||
|
1. Para salir de BootMii, oprime el botón con la flecha negra, y después elige el que tiene el icono del menú de Wii o el Canal Homebrew para salir a donde desees.
|
||||||
|
|
||||||
6. Para salir de BootMii, oprime el botón con la flecha negra, y después elige el que tiene el icono del menú de Wii o el Canal Homebrew para salir a donde desees.
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
Para restaurar un respaldo de la NAND desde la tarjeta SD, sigue estos mismos pasos, con la única diferencia en el paso 4, donde deberás seleccionar el botón de RestoreMii (el que tiene la flecha roja), en lugar del botón con la flecha verde. Esto puede ayudarte a recuperar tu consola de un brick, en el improbable caso de que necesites hacerlo. 
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
Para evitar perder los archivos de la copia de seguridad, te sugerimos copiar los archivos `nand.bin` y `keys.bin`, ubicados en la raíz de la tarjeta SD, a tu PC o un almacenamiento en la nube.
|
[Continue to Priiloader Installation](priiloader)<br> Priiloader adds a level of brick protection, and is highly recommended, especially if you were only able to install BootMii as IOS.
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
[Continuar a la instalación de Priiloader](priiloader)<br> Priiloader añade una capa de protección contra bricks, por lo que recomendamos su instalación, especialmente si solo pudiste instalar BootMii como IOS.
|
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Tabla de contenido" %}
|
|
||||||
|
|
||||||
Si tienes problemas para seguir los pasos de esta guía, por favor solicita ayuda en nuestro [servidor de Discord](https://discord.gg/rc24) (recomendado), o envíanos un [correo electrónico](mailto:support@riiconnect24.net). Soporte disponible solo en inglés.
|
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
|
||||||
{: .notice--danger}
|
|
||||||
#### Requisitos
|
#### Requisitos
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
#### Important notes
|
||||||
- Una tarjeta SD
|
|
||||||
- NAND Backup
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
|
|
||||||
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
|
|
||||||
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
|
|
||||||
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instrucciones
|
#### Instrucciones
|
||||||
|
|
||||||
Si has instalado BootMii como boot2, apaga y vuelve a encender la consola para iniciarlo, y luego salta al paso 3.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. 3.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Inicia el Canal Homebrew.
|
|
||||||
|
|
||||||
|
1. Launch the Homebrew Channel.
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Selecciona el botón de opciones (el que tiene dos engranajes).
|
3. Selecciona el botón de opciones (el que tiene dos engranajes).
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Sección I - Descarga/instalación
|
##### Sección I - Descarga/instalación
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Sección II - Instalación
|
##### Sección II - Instalación
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [Crear respaldo de NAND con BootMii](bootmii)
|
- [Crear respaldo de NAND con BootMii](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [Instalar cIOS d2x](cios)
|
- [Instalar cIOS d2x](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -113,7 +113,7 @@ If you did everything correctly, you should now have your custom theme installed
|
||||||
|
|
||||||
##### Reverting to Original Theme
|
##### Reverting to Original Theme
|
||||||
|
|
||||||
1. Inicia el Canal Homebrew.
|
1. Launch the Homebrew Channel.
|
||||||
2. Launch MyMenuify and navigate to your theme folder.
|
2. Launch MyMenuify and navigate to your theme folder.
|
||||||
3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
|
3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
|
||||||
4. Select Install and wait until it finishes.
|
4. Select Install and wait until it finishes.
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- גיבוי מלא של התוכנה יתחיל. ניתן לצפות בהתקדמות על המסך.
|
- גיבוי מלא של התוכנה יתחיל. ניתן לצפות בהתקדמות על המסך.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [Bluebomb](bluebomb)
|
- [Bluebomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -26,9 +26,8 @@ Una delle funzioni più importanti di BootMii è la possibilità di fare e ripri
|
||||||
Se hai BootMii installato come boot2 dovrai avviare BootMii riavviando la tua console. In questo caso salta i passaggi 1 e 2.
|
Se hai BootMii installato come boot2 dovrai avviare BootMii riavviando la tua console. In questo caso salta i passaggi 1 e 2.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Avvia l'Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Premi il pulsante HOME, dopodiché seleziona "Launch BootMii". 
|
|
||||||
|
|
||||||
Se il pulsante `Launch BootMii` non appare, per favore [riavvia l'HackMii Installer](hackmii) e installa BootMii.
|
Se il pulsante `Launch BootMii` non appare, per favore [riavvia l'HackMii Installer](hackmii) e installa BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,23 +38,23 @@ Navigare in BootMii non è possibile utilizzando un Wii Remote. Dovrai utilizzar
|
||||||
Se lo schermo resta nero e la luce blu del lettore dischi lampeggia, mancano i file di BootMii sulla tua scheda SD. Scarica [questo archivio zip](https://static.hackmii.com/bootmii_sd_files.zip) ed estrailo nella root della tua scheda SD, dopodiché riprova.
|
Se lo schermo resta nero e la luce blu del lettore dischi lampeggia, mancano i file di BootMii sulla tua scheda SD. Scarica [questo archivio zip](https://static.hackmii.com/bootmii_sd_files.zip) ed estrailo nella root della tua scheda SD, dopodiché riprova.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Seleziona il pulsante Opzioni (l'icona con l'ingranaggio). 
|
1. Seleziona il pulsante Opzioni (l'icona con l'ingranaggio). 
|
||||||
|
1. Seleziona il pulsante BackupMii. 
|
||||||
4. Seleziona il pulsante BackupMii. 
|
|
||||||
|
|
||||||
- Un backup della NAND inizierà. Puoi guardare il processo su schermo.
|
- Un backup della NAND inizierà. Puoi guardare il processo su schermo.
|
||||||
- I "Blocchi Danneggiati" sono normali. Non ti preoccupare se ne vedi alcuni su un backup della NAND.
|
- I "Blocchi Danneggiati" sono normali. Non ti preoccupare se ne vedi alcuni su un backup della NAND.
|
||||||
- Dopo questo passaggio, verrà verificato il backup. Anche se consigliata da effettuare, puoi saltare la verifica premendo il pulsante EJECT sulla tua Wii. Nota bene che se hai un disco inserito nel lettore dischi, premere il tasto EJECT espellerà anche il disco.
|
- Dopo questo passaggio, verrà verificato il backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. Quando il backup sarà completo, esci dalla schermata di backup della NAND premendo un pulsante qualsiasi. 
|
1. Quando il backup sarà completo, esci dalla schermata di backup della NAND premendo un pulsante qualsiasi. 
|
||||||
|
1. Per uscire da BootMii, premi il pulsante Indietro (quello con la freccia) e dopodiché potrai premere o il pulsante per il Menu Wii oppure il pulsante per l'Homebrew Channel per tornare dove tu voglia. 
|
||||||
|
|
||||||
6. Per uscire da BootMii, premi il pulsante Indietro (quello con la freccia) e dopodiché potrai premere o il pulsante per il Menu Wii oppure il pulsante per l'Homebrew Channel per tornare dove tu voglia. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
Per ripristinare un backup della NAND sulla tua scheda SD, potrai seguire queste istruzioni usando RestoreMii. Questo è utile nel caso improbabile che venga causato un brick alla tua Wii. 
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
Per essere sicuro che tu non perda i file, è consigliato copiare i file `nand.bin` e `keys.bin` dalla root della tua scheda SD al tuo computer.
|
[Continue to Priiloader Installation](priiloader)<br> Priiloader adds a level of brick protection, and is highly recommended, especially if you were only able to install BootMii as IOS.
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
[Continua con l'installazione di Priiloader](priiloader)<br> Priiloader aggiunge un livello di protezione da brick, ed è estremamente consigliato, specialmente in caso tu sia stato costretto a installare BootMii come IOS.
|
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
Se hai bisogno di qualsiasi informazione riguardante questo tutorial, entra nel [server discord di RiiConnect24 ](https://discord.gg/rc24)(consigliato) oppure [scrivici una mail a support@riconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requisiti
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Istruzioni
|
#### Istruzioni
|
||||||
|
|
||||||
Se hai BootMii installato come boot2 dovrai avviare BootMii riavviando la tua console. In questo caso salta i passaggi 1 e 2.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. In questo caso salta i passaggi 1 e 2.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Avvia l'Homebrew Channel.
|
|
||||||
|
|
||||||
|
1. Launch the Homebrew Channel.
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Seleziona il pulsante Opzioni (l'icona con l'ingranaggio). 
|
3. Seleziona il pulsante Opzioni (l'icona con l'ingranaggio). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Sezione 1 - Scaricare/Installare
|
##### Sezione 1 - Scaricare/Installare
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Sezione 2 - Installare Priiloader
|
##### Sezione 2 - Installare Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -113,7 +113,7 @@ If you did everything correctly, you should now have your custom theme installed
|
||||||
|
|
||||||
##### Reverting to Original Theme
|
##### Reverting to Original Theme
|
||||||
|
|
||||||
1. Avvia l'Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
2. Launch MyMenuify and navigate to your theme folder.
|
2. Launch MyMenuify and navigate to your theme folder.
|
||||||
3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
|
3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
|
||||||
4. Select Install and wait until it finishes.
|
4. Select Install and wait until it finishes.
|
||||||
|
|
|
||||||
|
|
@ -27,8 +27,7 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. Press the HOME Button, then select "Launch BootMii". 
|
|
||||||
|
|
||||||
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
If the `Launch BootMii` button does not appear, please [re-launch the HackMii Installer](hackmii) and install BootMii.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,20 +38,20 @@ Navigating BootMii is not possible using a Wii Remote. You must use the POWER an
|
||||||
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
If the screen stays black and the blue disc drive light is blinking, you are missing the BootMii files on your SD card. Download [this zip file](https://static.hackmii.com/bootmii_sd_files.zip) and extract it to the root of your SD card, then try again.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
1. Select the Options button (the icon with the gears). 
|
||||||
|
1. Select the BackupMii button. 
|
||||||
4. Select the BackupMii button. 
|
|
||||||
|
|
||||||
- A NAND backup will start. You can watch the progress on the screen.
|
- A NAND backup will start. You can watch the progress on the screen.
|
||||||
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
- "Bad Blocks" are normal. Don't worry when you see some on a NAND backup.
|
||||||
- After this step, it will verify the backup. While it is recommended, it can be skipped by pressing the EJECT button on your Wii. Note that if you have a disc inserted in the disc drive, pressing EJECT will also eject the disc.
|
- After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
1. When the backup is complete, exit the NAND backup screen by pressing any button. 
|
||||||
|
1. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
||||||
|
|
||||||
6. To exit BootMii, press the Back button (the one with the arrow) and then you can press either the Wii Menu button or the Homebrew Channel button to exit where you want to. 
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
To restore from a NAND backup on your SD card, you can follow these instructions using RestoreMii. This is useful in the unlikely case you brick your Wii. 
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
{: .notice--info}
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
#### What you need
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
If you need help for anything regarding this tutorial, please join [the RiiConnect24 Discord server](https://discord.gg/rc24) (recommended) or [e-mail us at support@riiconnect24.net](mailto:support@riiconnect24.net).
|
#### Important notes
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
{: .notice--danger}
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
#### Requirements
|
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
- An SD card
|
|
||||||
- NAND Backup
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### Instructions
|
#### Instructions
|
||||||
|
|
||||||
If you have BootMii installed as boot2 you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. Skip steps 1 and 2 if this is the case.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. Launch the Homebrew Channel.
|
1. Launch the Homebrew Channel.
|
||||||
|
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. Select the Options button (the icon with the gears). 
|
3. Select the Options button (the icon with the gears). 
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
|
|
@ -31,7 +31,7 @@ To resolve this issue, open HBC through Priiloader and access MyMenuifyMOD to in
|
||||||
## Semibrick
|
## Semibrick
|
||||||
|
|
||||||
#### Cause
|
#### Cause
|
||||||
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files.
|
A semibrick occurs when a different region System Menu or a different region custom theme is installed. This causes the Wii to fail to find the Wii settings page files. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
If this was caused by a theme you installed, use MyMenuifyMod to re-download the original theme file.
|
||||||
|
|
@ -48,7 +48,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
||||||
#### Cause
|
#### Cause
|
||||||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||||
|
|
||||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them.
|
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region System menu or theme, the Wii cannot find them. 
|
||||||
|
|
||||||
#### Solutions
|
#### Solutions
|
||||||
|
|
||||||
|
|
@ -78,6 +78,21 @@ To resolve this problem, you can try reseat or replace the Wi-Fi/Bluetooth modul
|
||||||
|
|
||||||
If you are on a Wii Mini, you must install a Wi-Fi module.
|
If you are on a Wii Mini, you must install a Wi-Fi module.
|
||||||
|
|
||||||
|
## Error 003 Brick
|
||||||
|
|
||||||
|
#### Cause
|
||||||
|
|
||||||
|
This brick happens when a non-Korean System Menu on 4.2 or 4.3 detects that the Korean key is present.
|
||||||
|
|
||||||
|
This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii. 
|
||||||
|
|
||||||
|
#### Solutions
|
||||||
|
|
||||||
|
Since this brick most often occurs after the System menu updates, Priiloader will not be present.
|
||||||
|
|
||||||
|
Korean Wiis also released with System menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to any Korean Wii.
|
||||||
|
|
||||||
|
The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery menu.
|
||||||
|
|
||||||
## IOS brick
|
## IOS brick
|
||||||
|
|
||||||
|
|
@ -90,7 +105,7 @@ You must have BootMii as boot2 to fix this brick. Priiloader will not load.
|
||||||
|
|
||||||
You can either restore a NAND backup, or do this:
|
You can either restore a NAND backup, or do this:
|
||||||
|
|
||||||
1. Use [NUS Downloader] to pack a WAD of your original System menu.
|
1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original System menu.
|
||||||
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
1. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the System menu WAD.
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -41,7 +41,7 @@ And some things to enhance your vWii experience:
|
||||||
##### Section I - Downloading/Installing
|
##### Section I - Downloading/Installing
|
||||||
|
|
||||||
1. Download the Priiloader installer and LoadPriiloader apps.
|
1. Download the Priiloader installer and LoadPriiloader apps.
|
||||||
1. Extract both apps to the root of your SD card or USB drive.
|
1. Extract each app to your SD card or USB drive making each be inside the `apps` folder.
|
||||||
|
|
||||||
##### Section II - Installing Priiloader
|
##### Section II - Installing Priiloader
|
||||||
|
|
||||||
|
|
@ -52,7 +52,7 @@ And some things to enhance your vWii experience:
|
||||||
|
|
||||||
##### Section III - Entering Priiloader
|
##### Section III - Entering Priiloader
|
||||||
|
|
||||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu: 
|
||||||
|
|
||||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||||
- Holding RESET on a Wii while turning it on.
|
- Holding RESET on a Wii while turning it on.
|
||||||
|
|
@ -63,12 +63,12 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
||||||
#### System Menu Hacks
|
#### System Menu Hacks
|
||||||
|
|
||||||
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
1. Launch the Homebrew Channel, and launch the Load Priiloader app.
|
||||||
1. Scroll down to `System Menu Hacks` and press `A`. 
|
1. Scroll down to `System Menu Hacks` and press `A`. 
|
||||||
|
|
||||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br> This causes Priiloader to fail to find the `hacks_hash.ini` file.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING". 
|
||||||
1. Scroll down to `save settings` and press `A`.
|
1. Scroll down to `save settings` and press `A`.
|
||||||
1. Press `B` to return to the main menu.
|
1. Press `B` to return to the main menu.
|
||||||
|
|
||||||
|
|
@ -133,12 +133,12 @@ You will be installing `uneoboot.dol` in step 3.
|
||||||
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
<div class="notice--warning"> {{ UNEO | markdownify }} </div>
|
||||||
|
|
||||||
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
1. Launch the Homebrew channel, then launch the Load Priiloader app.
|
||||||
1. Scroll down to `Load/Install file` and press A. 
|
1. Scroll down to `Load/Install file` and press A. 
|
||||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.  
|
||||||
1. Press B to go back to the main menu.
|
1. Press B to go back to the main menu.
|
||||||
1. Scroll down to `Settings` and press A. 
|
1. Scroll down to `Settings` and press A. 
|
||||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
1. Press Right to cycle through the Autoboot options until `Installed file` is selected. 
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
||||||
|
|
@ -154,6 +154,6 @@ Please don't set Autoboot to `BootMii IOS`. You will get stuck in a loop until y
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
|
|
||||||
1. Scroll down to `save settings` and press A. 
|
1. Scroll down to `save settings` and press A. 
|
||||||
1. Press B to return to the main menu.
|
1. Press B to return to the main menu.
|
||||||
1. Scroll back up to `System Menu` and press A.
|
1. Scroll back up to `System Menu` and press A.
|
||||||
|
|
|
||||||
|
|
@ -56,7 +56,7 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
|
||||||
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`" 
|
||||||
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
6. Choose "`Express (Recommended)`". It will give you everything you need. 
|
||||||
7. Select your region. 
|
7. Select your region. 
|
||||||
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. !\[Additional optional channels\](/images/RC24_Patcher/6.JPG
|
8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested. 
|
||||||
9. Press `1` then `ENTER` to start patching.
|
9. Press `1` then `ENTER` to start patching.
|
||||||
10. Be patient... 
|
10. Be patient... 
|
||||||
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.  
|
||||||
|
|
@ -70,4 +70,4 @@ You will have to launch the Everybody Votes Channel 4 times at most in order for
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
[If you're getting any other errors with the Forecast Channel or the News Channel, such as an error code starting with FORE or NEWS or a discontinued message, you can try to delete your VFFs with RC24-Clear-Tool](deleting-vffs).
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
|
||||||
|
|
@ -37,6 +37,7 @@ sitemap: false
|
||||||
|
|
||||||
- [BlueBomb](bluebomb)
|
- [BlueBomb](bluebomb)
|
||||||
- [BootMii Backup](bootmii)
|
- [BootMii Backup](bootmii)
|
||||||
|
- [BootMii Recovery](bootmiirecover)
|
||||||
- [cIOS](cios)
|
- [cIOS](cios)
|
||||||
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
- [Dos and Don'ts of Wii Modding](dosanddonts)
|
||||||
- [FlashHax](flashhax)
|
- [FlashHax](flashhax)
|
||||||
|
|
@ -47,6 +48,7 @@ sitemap: false
|
||||||
- [Priiloader](priiloader)
|
- [Priiloader](priiloader)
|
||||||
- [Relaunching the HackMii Installer](hackmii)
|
- [Relaunching the HackMii Installer](hackmii)
|
||||||
- [str2hax](str2hax)
|
- [str2hax](str2hax)
|
||||||
|
- [Types of Bricks](bricks)
|
||||||
- [Wii Mod Lite](wiimodlite)
|
- [Wii Mod Lite](wiimodlite)
|
||||||
- [Wilbrand](wilbrand)
|
- [Wilbrand](wilbrand)
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -26,9 +26,8 @@ BootMii의 가장 중요한 기능 중 하나는 Wii의 NAND 스토리지를 백
|
||||||
BootMii를 boot2로 설치한 경우 콘솔을 재시작하여 BootMii를 시작해야 합니다. 이 경우 1단계와 2단계를 건너뜁니다.
|
BootMii를 boot2로 설치한 경우 콘솔을 재시작하여 BootMii를 시작해야 합니다. 이 경우 1단계와 2단계를 건너뜁니다.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
1. 홈브류 채널을 시작합니다.
|
1. Launch the Homebrew Channel.
|
||||||
|
1. Press the HOME Button, then select "Launch BootMii". 
|
||||||
2. 홈 버튼을 누른 다음 "BootMii 실행"을 선택합니다.
|
|
||||||
|
|
||||||
`BootMii 실행` 버튼이 나타나지 않으면, [HackMii 설치 프로그램을 재실행](hackmii)하고 BootMii를 설치하세요.
|
`BootMii 실행` 버튼이 나타나지 않으면, [HackMii 설치 프로그램을 재실행](hackmii)하고 BootMii를 설치하세요.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
@ -39,23 +38,23 @@ Wii 리모컨으로는 BootMii를 탐색할 수 없습니다. 콘솔의 전원
|
||||||
화면이 검은색으로 유지되고 파란색 디스크 드라이브 표시등이 깜박이면 SD 카드에 BootMii 파일이 누락된 것입니다. [이 zip 파일](https://static.hackmii.com/bootmii_sd_files.zip)을 다운로드하여 SD 카드의 루트에 압축을 푼 다음 다시 시도하세요.
|
화면이 검은색으로 유지되고 파란색 디스크 드라이브 표시등이 깜박이면 SD 카드에 BootMii 파일이 누락된 것입니다. [이 zip 파일](https://static.hackmii.com/bootmii_sd_files.zip)을 다운로드하여 SD 카드의 루트에 압축을 푼 다음 다시 시도하세요.
|
||||||
{: .notice--warning}
|
{: .notice--warning}
|
||||||
|
|
||||||
3. 옵션 버튼 (톱니바퀴가 있는 아이콘) 을 선택합니다.
|
1. 옵션 버튼 (톱니바퀴가 있는 아이콘) 을 선택합니다.
|
||||||
|
1. BackupMii 버튼을 선택합니다.
|
||||||
4. BackupMii 버튼을 선택합니다.
|
|
||||||
|
|
||||||
- NAND 백업이 시작됩니다. 화면에서 진행 상황을 확인할 수 있습니다.
|
- NAND 백업이 시작됩니다. 화면에서 진행 상황을 확인할 수 있습니다.
|
||||||
- "배드 블록"은 정상적입니다. NAND 백업 중 일부가 보이더라도 걱정하지 마세요.
|
- "배드 블록"은 정상적입니다. NAND 백업 중 일부가 보이더라도 걱정하지 마세요.
|
||||||
- 이 단계가 끝나면, 백업을 확인합니다. 권장되는 기능이지만, Wii의 EJECT 버튼을 눌러 건너뛸 수도 있습니다. 디스크 드라이브에 디스크가 삽입되어 있는 경우 EJECT를 누르면 디스크도 꺼집니다.
|
- 이 단계가 끝나면, 백업을 확인합니다. Ideally, all the blocks should be green after the verification process.
|
||||||
|
|
||||||
5. 백업이 완료되면 아무 버튼이나 눌러 NAND 백업 화면을 종료합니다.
|
1. 백업이 완료되면 아무 버튼이나 눌러 NAND 백업 화면을 종료합니다.
|
||||||
|
1. BootMii를 종료하려면 뒤로 버튼 (화살표가 있는 버튼) 을 누른 다음 Wii 메뉴 버튼 또는 홈브류 채널 버튼을 눌러 원하는 위치에서 종료할 수 있습니다.
|
||||||
|
|
||||||
6. BootMii를 종료하려면 뒤로 버튼 (화살표가 있는 버튼) 을 누른 다음 Wii 메뉴 버튼 또는 홈브류 채널 버튼을 눌러 원하는 위치에서 종료할 수 있습니다.
|
<div id="restore-notice" class="notice" markdown="1">
|
||||||
|
To restore from a NAND backup on your SD card, you can follow the instructions for [RestoreMii](bootmiirecover).
|
||||||
|
Please be reminded that <strong>restoring a NAND backup is usually a last resort,</strong> and that there often better ways to fix your brick.
|
||||||
|
Try your best to [identify your brick condition](bricks) and reverse the action that caused it in the first place.
|
||||||
|
</div>
|
||||||
|
|
||||||
SD 카드의 NAND 백업에서 복원하려면 RestoreMii를 사용하여 다음 지침을 따르세요. 이 기능은 혹시라도 Wii가 고장 났을 때 유용합니다. 
|
To make sure you don’t lose the files, it's recommended to copy `nand.bin` and `keys.bin` from the root of your SD card to your computer.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
파일이 손실되지 않도록 하려면 SD 카드의 루트에서 `nand.bin` 및 `keys.bin`을 컴퓨터로 복사하는 것이 좋습니다.
|
[Continue to Priiloader Installation](priiloader)<br> Priiloader adds a level of brick protection, and is highly recommended, especially if you were only able to install BootMii as IOS.
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
[Priiloader 설치하기로 계속하기](priiloader)<br> Priiloader는 벽돌 보호 수준을 추가하며, 특히 BootMii를 IOS로만 설치할 수 있는 경우 적극 권장합니다.
|
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
|
||||||
|
|
@ -1,38 +1,50 @@
|
||||||
---
|
---
|
||||||
title: "BootMii Recovery"
|
title: "BootMii Recovery (RestoreMii)"
|
||||||
---
|
---
|
||||||
|
|
||||||
{% include toc title="Table of Contents" %}
|
|
||||||
|
|
||||||
이 자습서와 관련하여 도움이 필요하면 [RiiConnect24 디스코드 서버](https://discord.gg/rc24) (추천)에 가입하시거나, [support@riiconnect24.net](mailto:support@riiconnect24.net)로 이메일을 보내주세요.
|
|
||||||
{: .notice--info}
|
|
||||||
|
|
||||||
If you didn't install BootMii nor don't have a NAND backup, please install it and do a backup. You cannot restore a NAND backup from a USB.
|
|
||||||
{: .notice--warning}
|
|
||||||
|
|
||||||
Wii consoles with no GameCube controller ports CANNOT RECOVER from a NAND backup. This is because recovering from a NAND backup while having BootMii as IOS is dangerous.
|
|
||||||
{: .notice--danger}
|
|
||||||
#### 필요한 것
|
#### 필요한 것
|
||||||
|
- An earlier NAND Backup made by [BootMii](https://wii.guide/bootmii)
|
||||||
|
- A GameCube Controller*
|
||||||
|
|
||||||
- [BootMii](https://wii.guide/bootmii)
|
#### Important notes
|
||||||
- SD 카드
|
|
||||||
- NAND Backup
|
<strong> Restoring a NAND backup is usually a last resort.</strong>
|
||||||
|
|
||||||
|
If you are even able to enter BootMii, enter the Homebrew Channel instead, and try your best to [identify what caused the brick](bricks) and reverse it.
|
||||||
|
* If you have not done anything to cause a brick (or you're starting up your Wii after a long time), then it is probably a [Wi-Fi Brick](bricks#wi-fi-brick).
|
||||||
|
|
||||||
|
<strong>Family edition Wiis (Wiis without GameCube ports) CANNOT restore NAND backups.</strong>
|
||||||
|
|
||||||
|
Family edition Wiis released very well after [boot1 was patched](https://wiibrew.org/wiki/Wii_Family_Edition#Changes_carried_over_from_previous_revisions), which means you will not have BootMii as boot2.
|
||||||
|
|
||||||
|
If you do not have BootMii as boot2, RestoreMii will prompt you for the Konami code via a GameCube Controller.
|
||||||
|
|
||||||
|
Family edition Wiis do not have ports for GameCube controllers.
|
||||||
|
|
||||||
|
<strong>Restoring an unverified NAND backup may lead to a WORSE BRICK.</strong>
|
||||||
|
|
||||||
|
The same also goes for faulty SD cards.
|
||||||
|
|
||||||
|
<strong>Want to restore individual data from your NAND backup?</strong>
|
||||||
|
|
||||||
|
There is likely a much safer and faster way to bring it back to your Wii, likely involving the use of Dolphin Emulator.
|
||||||
|
|
||||||
|
For example, if you want to restore your Wii message board data, use Dolphin to import your NAND backup, find `Wii/title/00000001/00000002/data/cdb.vff`, copy it to your SD card as `cdbackup.vff`, and use [cdbackup](https://oscwii.org/library/app/cdbackup) to restore it.
|
||||||
|
|
||||||
|
If you want to restore a game's save data, use Dolphin to import your NAND backup, use `Tools > Export All Wii Saves` to export all your saves to your SD card, and use Data Management to move it to your Wii.
|
||||||
|
|
||||||
#### 사용 방법
|
#### 사용 방법
|
||||||
|
|
||||||
BootMii를 boot2로 설치한 경우 콘솔을 재시작하여 BootMii를 시작해야 합니다. 이 경우 1단계와 2단계를 건너뜁니다.
|
If you have BootMii installed as boot2, you will need to launch BootMii by restarting the console. 이 경우 1단계와 2단계를 건너뜁니다.
|
||||||
{: .notice--info}
|
{: .notice}
|
||||||
|
|
||||||
1. 홈브류 채널을 시작합니다.
|
|
||||||
|
|
||||||
|
1. Launch the Homebrew Channel.
|
||||||
2. Press the HOME Button, then select "Launch BootMii".
|
2. Press the HOME Button, then select "Launch BootMii".
|
||||||
|
|
||||||
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.
|
||||||
{: .notice--info}
|
{: .notice--info}
|
||||||
|
|
||||||
3. 옵션 버튼 (톱니바퀴가 있는 아이콘) 을 선택합니다.
|
3. 옵션 버튼 (톱니바퀴가 있는 아이콘) 을 선택합니다.
|
||||||
|
|
||||||
4. Select the RestoreMii button. 
|
4. Select the RestoreMii button. 
|
||||||
|
5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||||
5. On your GameCube controller, press the following buttons (Konami): ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
|
||||||
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||||
|
|
|
||||||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue