diff --git a/_pages/af_ZA/installing-boot9strap-(hardmod).txt b/_pages/af_ZA/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/af_ZA/installing-boot9strap-(hardmod).txt
+++ b/_pages/af_ZA/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt
+++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
index 9bd11507b..433670048 100644
--- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/da_DK/installing-boot9strap-(hardmod).txt b/_pages/da_DK/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/da_DK/installing-boot9strap-(hardmod).txt
+++ b/_pages/da_DK/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt
index 611ae27c9..a2338aaa2 100644
--- a/_pages/de_DE/installing-boot9strap-(hardmod).txt
+++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Schalte deine Konsole an
+1. Starte dein Gerät neu
 
-##### Section IV - Configuring Luma3DS
+##### Abschnitt III - Luma3DS konfigurieren
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt
index 1659c67fa..e5794e76a 100644
--- a/_pages/el_GR/installing-boot9strap-(hardmod).txt
+++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Ενότητα III - Ρύθμιση του Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt
index c049fcf7c..ad40c4aee 100644
--- a/_pages/en_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* Th' latest release 'o [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(th' `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt
index 8d372b0e5..35a80f0df 100644
--- a/_pages/es_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ Esto funcionará en New 3DS, Old 3DS, y 2DS en *todas* las versiones para las cu
 * Una imagen de tu NAND extraída usando [hardmod](https://gbatemp.net/threads/414498/) (*en inglés*)
 * La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versión estándar, no el archivo `dev`)*
 * La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
   + Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py`
+* La última versión de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(el archivo`.7z`)*
 * El archivo `.firm` correspondiente a tu consola y versión:
 
 | Version(es) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ Esto funcionará en New 3DS, Old 3DS, y 2DS en *todas* las versiones para las cu
   + Usuarios de Windows: Ejecutar `install-b9s.exe`
   + Usuarios de Mac y Linux: Ejecutar `install-b9s.py`
 1. Flashea el archivo `NAND-patched.bin` resultante a tu consola con tu hardmod
-1. Enciende tu consola
+1. Reinicia tu consola
 
-##### Sección IV - Configurar Luma3DS
+##### Sección III - Configuración de Luma3DS
 
 1. Tu consola debería haber iniciado en el menú de configuración de Luma3DS
   + Si obtienes una pantalla negra, [sigue esta guía de solución de problemas](troubleshooting#ts_sys_b9s)
diff --git a/_pages/fi_FI/installing-boot9strap-(2xrsa).txt b/_pages/fi_FI/installing-boot9strap-(2xrsa).txt
index 8564a012d..7fbee7348 100644
--- a/_pages/fi_FI/installing-boot9strap-(2xrsa).txt
+++ b/_pages/fi_FI/installing-boot9strap-(2xrsa).txt
@@ -2,29 +2,29 @@
 title: "Installing boot9strap (2xrsa)"
 ---
 
-**Käyttääksesi tällä sivulla olevia [magneetti](https://en.wikipedia.org/wiki/Magnet_URI_scheme)linkkejä tarvitset torrent-ohjelman, kuten [Deluge](http://dev.deluge-torrent.org/wiki/Download)n**
+To use the [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download)
 {: .notice--success}
 
-#### Tarpeet
+#### What you need
 
 * The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
-* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
-* Homebrew-[aloituspakkaus](http://smealum.github.io/ninjhax2/starter.zip)
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
+* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)
 
-#### Ohjeet
+#### Instructions
 
-##### Vaihe I – Valmistelut
+##### Section I - Prep Work
 
-1. Sammuta konsolisi
-1. Aseta SD-korttisi tietokoneeseesi
+1. Power off your device
+1. Insert your SD card into your computer
 1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
-1. Kopioi `starter.zip`-pakkauksesta `starter`-kansion _sisältö_ SD-korttisi juureen
+1. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card
 1. Create a folder named `boot9strap` on the root of your SD card
 1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Copy `arm9.bin` and `arm11.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
-1. Aseta SD-korttisi takaisin konsoliisi
-1. Käynnistä konsolisi
+1. Reinsert your SD card into your device
+1. Power on your device
 
 ##### Section II - Launching SafeB9SInstaller
 
diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
index 10769bfa0..21fb33fe6 100644
--- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt
+++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* Luma3DS:n [viimeisin julkaisu](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-tiedosto)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Käynnistä konsolisi
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Vaihe III – Luma3DS:n määrittäminen
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
index 109771519..4f149d77a 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt
@@ -41,7 +41,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 
 1. Éteignez **La 3DS source**
 1. Insérez la **carte SD de la 3DS source** dans votre ordinateur
-1. Copiez 'GodMode9.firm' (ou 'GodMode9.bin' pour ceux qui utilisent arm9loaderhax) depuis le '.zip' de GodMode9 vers le dossier 'luma/payloads' sur la carte SD de **la 3DS source**
+1. Copiez `GodMode9.firm` (ou`GodMode9.bin` pour ceux qui utilisent arm9loaderhax) depuis le '.zip' de GodMode9 vers le dossier 'luma/payloads' sur la carte SD de **la 3DS source**
 1. Copiez le fichier `.app` du dossier DSiWare injection`.zip` à la racine de la **carte SD de la 3DS source**
 1. Copiez `savedata` du dossier DSiWare injection`.zip` à la racine de la **carte SD de la 3DS source**
 1. Réinsérez la carte SD de **la 3DS source** dans celle-ci
@@ -98,7 +98,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 
 ##### Section III - Transfert de données
 
-1. Si **la 3DS cible ** a déjà un ID Nintendo Network, vous devez formater la console à l’aide des paramètres du système :
+1. Si **la 3DS cible** a déjà un ID Nintendo Network, vous devez formater la console à l’aide des paramètres du système :
   + Aller à la dernière page des "Autres réglages" puis sélectionnez "Format le système", puis suivez toutes les instructions
 1. Lisez ce qui suit :
   + Votre 3DS avec CFW = la 3DS source = "Système Source"
@@ -151,7 +151,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 **N'utilisez PAS b9sTool sur un appareil où arm9loaderhax est déjà installé ou vous allez BRICK!**
 {: .notice--danger}
 
-1. Lancement de b9sTool en démarrant votre jeu DSiWare sur ** la 3DS cible **
+1. Lancement de b9sTool en démarrant votre jeu DSiWare sur **la 3DS cible**
 1. Sélectionnez "Install boot9strap" et validez
 1. Quittez b9sTool, puis éteignez votre appareil
   + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
diff --git a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
index e8984855d..63a723cc5 100644
--- a/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt
@@ -104,7 +104,7 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 
 1. ** Faites une sauvegarde complète des deux cartes SD des deux 3DS dans deux dossiers différents (Gardez une trace pour savoir quelle carte SD appartient à la bonne 3DS)!**
 1. Réinsérez chaque carte SD dans la 3DS correspondante
-1. Si **la 3DS cible ** a déjà un ID Nintendo Network, vous devez formater la console à l’aide des paramètres du système :
+1. Si **la 3DS cible** a déjà un ID Nintendo Network, vous devez formater la console à l’aide des paramètres du système :
   + Aller à la dernière page des "Autres réglages" puis sélectionnez "Format le système", puis suivez toutes les instructions
 1. Lisez ce qui suit :
   + Votre 3DS avec CFW = la 3DS source = "Système Source"
diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
index e5850c74e..37bc79b61 100644
--- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
 * Une image de votre NAND extraite à l’aide de votre [hardmod](https://gbatemp.net/threads/414498/)
 * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, pas le fichier `dev`)*
 * La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
   + Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py`
+* La dernière version de [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(le fichier `.7z`)*
 * Le `.firm` correspondant à votre appareil et version:
 
 | Version (s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ Cela fonctionne sur la New3DS, Old3DS Old2DS sur *toutes* les versions pour lesq
   + Utilisateurs Windows: Lancer `install-b9s.exe`
   + Utilisateurs Mac et Linux: Lancer `install-b9s.py`
 1. Flashez le nouveau fichier `NAND-patched.bin` sur votre console avec votre hardmod
-1. Allumez à présent votre 3DS
+1. Redémarrez votre console
 
-##### Section IV - Configuration de Luma3DS
+##### Section III - Configuration de Luma3DS
 
 1. Votre console va démarrer dans la configuration de Luma3DS
   + Si vous obtenez un écran noir, [suivez ce guide de problèmes et dépannage](troubleshooting#ts_sys_b9s)
diff --git a/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt b/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
index 0af8bb30e..ee9cc6b6e 100644
--- a/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/fr_FR/installing-boot9strap-(homebrew-launcher).txt
@@ -43,7 +43,7 @@ Pour utiliser les liens suivant [magnet](https://fr.wikipedia.org/wiki/Magnet_(s
 1. Lancez "safehax" que vous trouverez dans la liste des homebrews
   + Vous devrez peut-être descendre dans la liste pour voir cette option
   + Si vous obtenez une erreur "PM INIT FAILED", assurez-vous que vous avez exécuté udsploit avec la Communication sans fil allumée
-  + Si vous obtenez encore une erreur "PM INIT FAILED", essayez d’utiliser la [version r19 de safehax] (https://github.com/TiniVi/safehax/releases/tag/r19)
+  + Si vous obtenez encore une erreur "PM INIT FAILED", essayez d’utiliser la [version r19 de safehax](https://github.com/TiniVi/safehax/releases/tag/r19)
   + Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez
 1. Si l'exploit a réussit, vous devriez avoir démarré dans SafeB9SInstaller
 
diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt
index 0a97a0b88..17359b912 100644
--- a/_pages/he_IL/installing-boot9strap-(hardmod).txt
+++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ title: "התקנת boot9strap (הלחמה)"
 * ה NAND שלכם שהוצאתם עם [ההלחמה](https://gbatemp.net/threads/414498/)
 * הגרסא העדכנית של [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *( boot9strap רגיל; לא קובץ ה `dev`)*
 * הגרסה העדכנית של [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
   + משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py`
+* את הגרסה העדכנית של [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(יש להוריד את קובץ ה-`.7z`)*
 * הקובץ`.firm` לפי הקונסולה והאזור:
 
 | גרסא(ות) | ליבה | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ title: "התקנת boot9strap (הלחמה)"
   + משתמשי Windows: תריצו את `install-b9s.exe`
   + משתמשי Mac ו Linux: תריצו את `install-b9s.py`
 1. תשימו את `nand_patched.bin`שיצא על הקונסולה עם ההלחמה שעשיתם
-1. תפעילו את המכשיר
+1. תאתחלו את הקונסולה
 
-##### Section IV - Configuring Luma3DS
+##### חלק III - הגדרת Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt
+++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/id_ID/installing-boot9strap-(hardmod).txt
+++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt
index 92af1babc..76df4084a 100644
--- a/_pages/it_IT/installing-boot9strap-(hardmod).txt
+++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ Questo processo funziona su New 3DS, Old 3DS e 2DS su *tutte* le versioni per le
 * Il file immagine della tua NAND estratto tramite [hardmod](https://gbatemp.net/threads/414498/)
 * L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(la versione normale di boot9strap; non il file `dev`)*
 * L'ultima versione di [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)*
   + Gli utenti Windows possono usare il file `.exe` precompilato, mentre gli utenti Mac e Linux dovranno installare [Python 3](https://www.python.org/downloads/) per avviare il file `.py`
+* L'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(il file `.7z`)*
 * Il file `.firm` per la tua console e per la tua versione di sistema:
 
 | Versione/i | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ Questo processo funziona su New 3DS, Old 3DS e 2DS su *tutte* le versioni per le
   + Se sei un utente Windows: Avvia il file `install-b9s.exe`
   + Se sei un utente Mac o Linux: Avvia il file `install-b9s.py`
 1. Flasha il file `nand_patched.bin` appena creato nella tua console tramite hardmod
-1. Accendi la console
+1. Riavvia la console
 
-##### Sezione IV - Configurare Luma3DS
+##### Sezione III - Configurare Luma3DS
 
 1. La tua console dovrebbe avviarsi all'interno del menu di configurazione di Luma3DS
   + Se ottieni una schermata nera, [segui questa guida per risolvere il problema](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ja_JP/installing-boot9strap-(hardmod).txt b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
index 26cea63df..373436a47 100644
--- a/_pages/ja_JP/installing-boot9strap-(hardmod).txt
+++ b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *（`.7z` ファイル）*の最新バージョン
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *（`.7z` ファイル）*の最新バージョン
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### セクション III - Luma3DSを設定する
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
index 1e8f5416e..84c963f15 100644
--- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt
+++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
@@ -20,8 +20,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* 최신 버전의 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 파일)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -72,9 +72,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. 기기를 시작해 주세요.
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### 섹션 III - Luma3DS 설정
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ms_MY/installing-boot9strap-(hardmod).txt b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
index aef9f0556..80839c69a 100644
--- a/_pages/ms_MY/installing-boot9strap-(hardmod).txt
+++ b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+*Keluaran terkini [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(fail `.7z`)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Seksyen III - Konfigurasi Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/nl_NL/installing-boot9strap-(hardmod).txt b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
index 2caadd7fc..94e2c7c65 100644
--- a/_pages/nl_NL/installing-boot9strap-(hardmod).txt
+++ b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* De meest recente versie van [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(het `.7z` bestand)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Zet je 3DS aan
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+### Deel III - Luma3DS configureren
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/no_NO/installing-boot9strap-(hardmod).txt b/_pages/no_NO/installing-boot9strap-(hardmod).txt
index bec5e2fee..1785386cf 100644
--- a/_pages/no_NO/installing-boot9strap-(hardmod).txt
+++ b/_pages/no_NO/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* Siste utgave av [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z`-filen)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Seksjon III - Konfigurering av Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/pl_PL/installing-boot9strap-(hardmod).txt b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
index 7bda9d9e4..a35a481c4 100644
--- a/_pages/pl_PL/installing-boot9strap-(hardmod).txt
+++ b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* Najnowszą wersję [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(plik`.7z`)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Sekcja III - Konfiguracja Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 90439ebc5..f64855723 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -69,7 +69,7 @@ Durante este processo, também configuramos alguns programas como os seguintes:
 1. Reinsira seu cartão SD no seu dispositivo
 1. Ligue o seu dispositivo
 
-##### Section II - Updating the System
+##### Seção II - Atualização do Sistema
 
 Se, enquanto você seguia uma versão antiga deste guia, você fez um CTRTransfer no seu *New 3DS* para 2.1.0, agora é o momento de [restaurar seu backup do NAND](godmode9-usage#nand_restore) antes de fazer esta seção.
 {: .notice--danger}
@@ -93,7 +93,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Aperte (Start) para reiniciar seu dispositivo
 1. Se você ainda está abrindo o app Informações sobre saúde e segurança original e já fez downgrade com Gateway no passado, [siga este guia de troubleshooting](troubleshooting#gw_fbi)
 
-##### Section IV - Installing CIAs
+##### Seção IV - Instalando CIAs
 
 1. Inicie o aplicativo Informações sobre saúde e segurança (que agora é o FBI)
 1. Navegue para `SD` -> `cias`
@@ -101,7 +101,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Selecione a opção "Install and delete all CIAs" e, em seguida, aperte (A) para confirmar
 1. Aperte (Home) para sair do FBI
 
-##### Section V - DSP Dump
+##### Seção V - DSP Dump
 
 1. Inicie o DSP1
 1. Quando completado, aperte (B) para auto excluir o app e retornar ao Menu HOME
@@ -114,7 +114,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Selecione "Restore H&S"
 1. Aperte (A) para destravar "SysNAND (lvl1) writing", então aperte a sequência de botões solicitada
 
-##### Section VII - CTRNAND Luma3DS
+##### Seção VII - Luma3DS & CTRNAND
 
 1. Aperte (B) para retornar para o menu principal
 1. Navegue para `[0:] SDCARD`
@@ -130,7 +130,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
 1. Navegue para `[1:] SYSNAND CTRNAND` -> `rw`
 1. Aperte (Y) para colar uma cópia da pasta `luma` do seu cartão SD
 
-##### Section VIII - NAND Backup
+##### Seção VIII - Backup da NAND
 
 1. Aperte (B) duas vezes para retornar para o menu principal
 1. Aperte (Home) para abrir o menu de ações
diff --git a/_pages/pt_BR/installing-boot9strap-(2xrsa).txt b/_pages/pt_BR/installing-boot9strap-(2xrsa).txt
index 88e948d25..207000ba8 100644
--- a/_pages/pt_BR/installing-boot9strap-(2xrsa).txt
+++ b/_pages/pt_BR/installing-boot9strap-(2xrsa).txt
@@ -42,11 +42,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
 1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
 
-##### Section IV - Configuring Luma3DS
+##### Seção IV - Configurando o Luma3DS
 
-1. Your device should have rebooted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(browser).txt b/_pages/pt_BR/installing-boot9strap-(browser).txt
index ff4b2c60a..0da6eb2d4 100644
--- a/_pages/pt_BR/installing-boot9strap-(browser).txt
+++ b/_pages/pt_BR/installing-boot9strap-(browser).txt
@@ -46,11 +46,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
 1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
 
-##### Section IV - Configuring Luma3DS
+##### Seção IV - Configurando o Luma3DS
 
-1. Your device should have rebooted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
index 823ae9c3d..24376def8 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware-game-injection).txt
@@ -144,7 +144,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Saia do b9sTool
   + Você pode ter que forçar o desligamento do aparelho segurando o botão power
 1. Coloque o seu cartão SD no seu computador e, em seguida, copie o `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (dependendo do seu dispositivo) para um local seguro; faça backups em vários locais; Esse backup vai salvar você de um brick se algo der errado
-1. Reinsert your SD card into **the target 3DS**
+1. Reinsira seu cartão SD no **3DS de destino**
 
 ##### Seção VI - Gravando o FIRM do 3DS de destino
 
@@ -155,13 +155,13 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Selecione "Install boot9strap" e confirme
 1. Saia do b9sTool, depois desligue o seu dispositivo
   + Você pode ter que forçar o desligamento segurando o botão power
-1. Power on **the target 3DS**
+1. Ligue **o 3DS de destino**
 
-##### Section VII - Configuring Luma3DS
+##### Seção VII - Configurando o Luma3DS
 
-1. Your device should have booted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt b/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
index b8e8dd852..74530f34a 100644
--- a/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
+++ b/_pages/pt_BR/installing-boot9strap-(dsiware-save-injection).txt
@@ -155,7 +155,7 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Saia do b9sTool
   + Você pode ter que forçar o desligamento segurando o botão power
 1. Coloque o seu cartão SD no seu computador e, em seguida, copie o `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (dependendo do seu dispositivo) para um local seguro; faça backups em vários locais; Esse backup vai salvar você de um brick se algo der errado
-1. Reinsert your SD card into **the target 3DS**
+1. Reinsira seu cartão SD no **3DS de destino**
 
 ##### Seção VI - Gravando o FIRM do 3DS de destino
 
@@ -171,13 +171,13 @@ Use um [gerenciador de saves](https://github.com/J-D-K/JKSM/releases/latest) par
 1. Selecione "Install boot9strap" e confirme
 1. Saia do b9sTool, depois desligue o seu dispositivo
   + Você pode ter que forçar o desligamento do aparelho segurando o botão power
-1. Power on **the target 3DS**
+1. Ligue **o 3DS de destino**
 
-##### Section VII - Configuring Luma3DS
+##### Seção VII - Configurando o Luma3DS
 
-1. Your device should have booted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
index f8f88435c..9f01c083c 100644
--- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ Isto funcionará no New 3DS, Old 3DS e 2DS em *todas* as versões em que você t
 * A imagem de sua NAND extraída usando seu [hardmod](https://gbatemp.net/threads/414498/)
 * A versão mais recente do [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap padrão; não o arquivo `dev`)*
 * A versão mais recente do [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
   + Os usuários de Windows podem usar o compilado `.exe`, enquanto os usuários de Mac e Linux precisarão ter [Python 3](https://www.python.org/downloads/) instalado para executar o `.py`
+* A versão mais recente do [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(o arquivo `.7z`)*
 * O `.firm` correspondente ao seu dispositivo e versão:
 
 | Versão(ões) | Kernel | Old 3DS | New 3DS |
@@ -71,13 +71,13 @@ Isto funcionará no New 3DS, Old 3DS e 2DS em *todas* as versões em que você t
   + Usuários Windows: Execute `install-b9s.exe`
   + Usuários de Linux e Mac: Execute `install-b9s.py`
 1. Sobrescreva esta `NAND-patched.bin` para o seu dispositivo com seu hardmod
-1. Ligue o seu dispositivo
+1. Reinicie seu dispositivo
 
-##### Section IV - Configuring Luma3DS
+##### Seção III - Configurando o Luma3DS
 
-1. Your device should have booted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter iniciado no menu de configuração do Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar as seguintes opções:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt b/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
index 170153cf2..207b8deeb 100644
--- a/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
+++ b/_pages/pt_BR/installing-boot9strap-(homebrew-launcher).txt
@@ -53,11 +53,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
 1. Quando solicitado, aperte a sequência de botões dada para instalar o boot9strap
 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
 
-##### Section IV - Configuring Luma3DS
+##### Seção IV - Configurando o Luma3DS
 
-1. Your device should have rebooted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_BR/installing-boot9strap-(mset).txt b/_pages/pt_BR/installing-boot9strap-(mset).txt
index 253783268..ae8558f7d 100644
--- a/_pages/pt_BR/installing-boot9strap-(mset).txt
+++ b/_pages/pt_BR/installing-boot9strap-(mset).txt
@@ -47,11 +47,11 @@ Para usar os links [magnéticos](https://pt.wikipedia.org/wiki/Magnet-Link) nest
 1. Quando solicitado, aperte a sequência de botões solicitada para instalar o boot9strap
 1. Quando concluído, aperte (A) para reiniciar o seu dispositivo
 
-##### Section IV - Configuring Luma3DS
+##### Seção IV - Configurando o Luma3DS
 
-1. Your device should have rebooted into the Luma3DS configuration menu
-  + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
-1. Use the (A) button and the D-Pad to turn on the following:    
+1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_b9s)
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:    
   + **"Show NAND or user string in System Settings"**
 1. Aperte (Start) para salvar e reiniciar
 
diff --git a/_pages/pt_PT/installing-boot9strap-(hardmod).txt b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
index d6ace3973..25fe1203d 100644
--- a/_pages/pt_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ro_RO/installing-boot9strap-(hardmod).txt b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
index ae8fab4ad..dbe7d09a5 100644
--- a/_pages/ro_RO/installing-boot9strap-(hardmod).txt
+++ b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
index 2eb7c6ee6..2266d37bc 100644
--- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt
+++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ title: "Установка boot9strap (Hardmod)"
 * Полученный с помощью [хардмода](https://gbatemp.net/threads/414498/) (англ.) образ NAND
 * Свежая версия [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(стандартный boot9strap; не `dev-файл`)*
 * Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
   + Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов`
+* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z-архив`)*
 * `.firm`, соответствующий вашему устройству и версии ПО:
 
 | Версия(и) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ title: "Установка boot9strap (Hardmod)"
   + Пользователи Windows: Запустите `install-b9s.exe`
   + Пользователи Mac и Linux: Запустите `install-b9s.py`
 1. Прошейте получившийся `NAND-patched.bin` обратно в ваше устройство, используя хардмод
-1. Включите консоль
+1. Перезагрузите устройство
 
-##### Часть IV - Настройка Luma3DS
+##### Часть III - Настройка Luma3DS
 
 1. Ваша консоль должна загрузиться в меню конфигурации Luma3DS
   + Если экран остаётся чёрным, то перейдите к разделу [проблемы и их решения](troubleshooting#ts_sys_b9s)
diff --git a/_pages/sr_SP/installing-boot9strap-(hardmod).txt b/_pages/sr_SP/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/sr_SP/installing-boot9strap-(hardmod).txt
+++ b/_pages/sr_SP/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/sv_SE/installing-boot9strap-(hardmod).txt b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/sv_SE/installing-boot9strap-(hardmod).txt
+++ b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/th_TH/installing-boot9strap-(hardmod).txt b/_pages/th_TH/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/th_TH/installing-boot9strap-(hardmod).txt
+++ b/_pages/th_TH/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/tr_TR/installing-boot9strap-(hardmod).txt b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
index 94f109e04..03a8a45f9 100644
--- a/_pages/tr_TR/installing-boot9strap-(hardmod).txt
+++ b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Bölüm III - Luma3DS yapılandırma
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/uk_UA/installing-boot9strap-(hardmod).txt b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/uk_UA/installing-boot9strap-(hardmod).txt
+++ b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/vi_VN/installing-boot9strap-(hardmod).txt b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
index 5879e5a83..98d1abdb7 100644
--- a/_pages/vi_VN/installing-boot9strap-(hardmod).txt
+++ b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### Section III - Configuring Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
index cd541692e..cde97dbfe 100644
--- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
 * Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
 * The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(standard boot9strap; not the `dev` file)*
 * The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
   + Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
+* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
 * The `.firm` corresponding to your device and version:
 
 | Version(s) | Kernel | Old 3DS | New 3DS |
@@ -71,9 +71,9 @@ This will work on New 3DS, Old 3DS, and 2DS on *all* versions that you have a co
   + Windows Users: Run `install-b9s.exe`
   + Mac and Linux Users: Run `install-b9s.py`
 1. Flash your outputted `NAND-patched.bin` to your device with your hardmod
-1. Power on your device
+1. Reboot your device
 
-##### Section IV - Configuring Luma3DS
+##### 第三部分 - 设置 Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
index b3bc6c87a..8073f53d6 100644
--- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
@@ -19,8 +19,8 @@ title: "安裝 boot9strap（透過硬改）"
 * 透過[硬改](https://gbatemp.net/threads/414498/)提取您主機的 NAND 鏡像檔
 * 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（正常版的 boot9strap；非 `dev` 檔案）*
 * 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
-* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
   + Windows 使用者可使用已編譯的 `.exe` 檔，而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔
+* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
 * 對應您主機型號及版本的 `.firm` 檔案：
 
 | 系統版本 | 核心版本 | 舊型 3DS | New 3DS |
@@ -71,9 +71,9 @@ title: "安裝 boot9strap（透過硬改）"
   + Windows 使用者：請執行 `install-b9s.exe` 檔案
   + Mac and Linux 使用者：請執行 `install-b9s.py` 檔案
 1. 透過硬改刷入剛生成的 `NAND-patched.bin` 檔案至您的主機
-1. 啟動您的主機
+1. 重新啟動您的主機
 
-##### Section IV - Configuring Luma3DS
+##### 第三節 — 設定 Luma3DS
 
 1. Your device should have booted into the Luma3DS configuration menu
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)