diff --git a/404.html b/404.html index 267ec79c9..9016555ee 100644 --- a/404.html +++ b/404.html @@ -359,7 +359,7 @@ window.cookieconsent.initialise({
Sorry, but the page you were trying to view does not exist.
diff --git a/bluebomb.html b/bluebomb.html index 3ceee5c2c..7921c0b7b 100644 --- a/bluebomb.html +++ b/bluebomb.html @@ -433,7 +433,7 @@ window.cookieconsent.initialise({Press the HOME Button, then select “Launch BootMii”.
- +Select the Options button (the icon with the gears).
- +When the process is complete, exit the NAND backup screen by pressing any button.
- +Press the Back button (the one with an arrow), then press either the Wii Menu button or the Homebrew Channel button to exit BootMii.
- +Select the Options button (the icon with the gears).
- +Select the RestoreMii button.
- +I HAZ SUCCESS!
, otherwise I HAZ FAIL
. Hit any button on your Wii console or GCN controller.A semibrick occurs when a different region Wii Menu or a different region custom theme is installed. As the Wii Settings menu is rendered using HTML pages with Opera, themes often replace these pages and put them in different directories; essentially leading to a 404 Not Found
error but in the form of a console brick.
Verify in AnyRegion Changer that your console region is the same as the theme or Wii Menu that you have installed.
@@ -539,7 +539,7 @@ Bricks can occur for a variety of reasons, however usually it results through coAttempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. This happened after installing a WAD and rebooting, or returning to the Wii Menu. Alternatively, the Wii Menu can still be accessed, but opening the corrupt channel results in the console freezing. In some cases, you may see the “System files are corrupted” screen.
- +Banner bricks occur if you install a WAD file that has an invalid Wii Menu banner or icon.
@@ -586,7 +586,7 @@ Bricks can occur for a variety of reasons, however usually it results through coHowever, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region Wii Menu or theme, the Wii cannot find them.
- +Error:003
unauthorized device has been detected.
When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While obviously this failed, they also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is not Korean. If this check succeeds, the error triggers and the Wii is effectively bricked.
diff --git a/cios.html b/cios.html index 905cc9f05..6609f112b 100644 --- a/cios.html +++ b/cios.html @@ -421,7 +421,7 @@ However, If you encounter any errors likeThe WAD files should be on your SD card like this:
-
+
Section II - Installing
@@ -451,7 +451,7 @@ However, If you encounter any errors like
+
cIOS 249 Installation
@@ -462,7 +462,7 @@ However, If you encounter any errors like
+
cIOS 250 Installation
@@ -473,7 +473,7 @@ However, If you encounter any errors like
+
cIOS 251 Installation
@@ -484,7 +484,7 @@ However, If you encounter any errors like
+
diff --git a/dump-games.html b/dump-games.html
index 6a6cdade4..26fd17072 100644
--- a/dump-games.html
+++ b/dump-games.html
@@ -409,7 +409,7 @@ window.cookieconsent.initialise({
Select your device that you will be dumping the game to - a USB device or SD card.
-
+
When prompted, select Yes
to download the redump.org DAT files.
@@ -418,24 +418,24 @@ window.cookieconsent.initialise({
You may get an exception error if you do this. If so, simply skip and verify your dump on Dolphin Emulator if needed.
-
+
Insert the game disc you would like to dump.
-
+
Set the settings as shown on the screen below, while verifying if your game disc is dual layer or not.
-
+
Press A to start dumping the disc.
- This process can take quite some time, since it will dump the full 4.7 GB disc contents (8.5 GB for dual layer discs).
-
+
Proceed to joining PART files.
@@ -465,30 +465,30 @@ window.cookieconsent.initialise({
Choose the disc that you want to copy (The options are: GameCube Disc
, Wii Single-Layer Disc
, Wii Dual-Layer Disc
) and press “A”
-
+
Insert the game disc into your Wii.
- If it is already inserted, eject and reinsert the disc.
-
+
Select the proper disc type.
-
+
Press any button to begin the dumping process.
-
+
Remember or write down your Wii’s URL (IP address).
On your computer, open the browser, go to your address bar and enter the Wii URL.
-
+
Click on Click here to download XXXX.iso
.
Proceed to joining PART files.
diff --git a/dump-wads.html b/dump-wads.html
index 1f9d9a428..3d09efa56 100644
--- a/dump-wads.html
+++ b/dump-wads.html
@@ -391,17 +391,17 @@ window.cookieconsent.initialise({
Press A.
-
+
Select Installed Channel Titles
.
-
+
Find the content you want to dump and press the 1 Button.
-
+
Select Backup to WAD
.
At the prompt to Fakesign the ticket
, select Yes
.
@@ -411,7 +411,7 @@ window.cookieconsent.initialise({
The WAD has now been dumped, and should appear at the specified directory on your SD card.
-
+
diff --git a/feed.xml b/feed.xml
index c1e6d166e..fe2cceafa 100644
--- a/feed.xml
+++ b/feed.xml
@@ -1 +1 @@
-Jekyll 2023-10-06T04:34:32+00:00 https://wii.hacks.guide/feed.xml Wii Hacks Guide The complete guide to modding your Wii (and Wii mini) Nintendo Homebrew
\ No newline at end of file
+Jekyll 2023-10-06T15:45:22+00:00 https://wii.hacks.guide/feed.xml Wii Hacks Guide The complete guide to modding your Wii (and Wii mini) Nintendo Homebrew
\ No newline at end of file
diff --git a/flashhax.html b/flashhax.html
index 62c7d3241..fce739eab 100644
--- a/flashhax.html
+++ b/flashhax.html
@@ -392,19 +392,19 @@ window.cookieconsent.initialise({
Launch the Internet Channel.
-
+
Go to flashhax.com
.
Select the correct region for your console.
-
+
Press the star button to open the bookmark tab.
Select Add Favorite
.
-
+
@@ -417,7 +417,7 @@ window.cookieconsent.initialise({
It may take some time as it is downloading the installer over the Internet.
-
+
If the exploit was successful, your device will have loaded the HackMii Installer.
diff --git a/gcsaves.html b/gcsaves.html
index 86e5f1a12..61d6f9c9a 100644
--- a/gcsaves.html
+++ b/gcsaves.html
@@ -440,22 +440,22 @@ window.cookieconsent.initialise({
-
Select the device you want to restore from.
-
+
-
In GCMM, Press X on a GameCube controller or + on a Wii remote.
-
+
-
Select the slot your memory card is in.
-
+
-
Select the save you want to restore. If you have multiple saves to restore, you can press R on the GameCube controller or 1 on the Wii remote to restore all of your saves.
-
+
- When restoration is complete, press any button to continue.
@@ -487,22 +487,22 @@ window.cookieconsent.initialise({
-
Select the device you want to backup to.
-
+
-
In GCMM, Press Y on a GameCube controller or - on a Wii remote.
-
+
-
Select the slot your memory card is in.
-
+
-
Select the save you want to backup. If you have multiple saves to backup, you can press R on the GameCube controller or 1 on the Wii remote to backup all of your saves.
-
+
- When backing up is complete, press any button to continue.
@@ -533,12 +533,12 @@ window.cookieconsent.initialise({
-
Select the device you want to dump to.
-
+
-
Press L and Y at the same time on GameCube Controller or B and - at the same time on the Wii remote to backup your to a .raw file and select the slot your memory card is in.
-
+
- When the dump is complete, press any button to continue. It should be saved in a folder on the root of your SD or USB called
MCBACKUP
.
@@ -562,13 +562,13 @@ window.cookieconsent.initialise({
-
Select the device you want to restore from.
-
+
- Press L and X at the same time on GameCube controller or B and + at the same time on the Wii remote.
-
Select the slot your memory card is in.
-
+
- It should restore the .raw file to your memory card. When restoration is complete, press any button to continue.
@@ -589,13 +589,13 @@ window.cookieconsent.initialise({
-
From the System menu, navigate into Wii Options
, Data Management
, Save Data
, Nintendo GameCube
.
-
+
-
+
-
+
-
+
- Find the save you want, select it and select
Move or Copy
.
diff --git a/hbc-mini.html b/hbc-mini.html
index c383fe06a..c0a118de5 100644
--- a/hbc-mini.html
+++ b/hbc-mini.html
@@ -380,14 +380,14 @@ window.cookieconsent.initialise({
-
You will see a scam warning screen. Wait 30 seconds for the text “Press 1 to continue” to appear, then press 1.
-
+
-
Press Continue
, then select Install The Homebrew Channel
.
-
+
-
+
- Press
Continue
when finished.
- Once done, select
Exit
to exit the HackMii installer.
diff --git a/hbc.html b/hbc.html
index 64d231acd..f91c20a0c 100644
--- a/hbc.html
+++ b/hbc.html
@@ -386,45 +386,45 @@ You can always install it later.
- You will see a scam warning screen.
-
+
Wait 30 seconds for the text “Press 1 to continue” to appear, then press 1.
Select Continue
.
-
+
Select Install the Homebrew Channel
.
-
+
Once it is completed, select Continue
.
-
+
Select Back
, then select BootMii
.
-
+
Select Install BootMii as IOS
.
-
+
-
+
-
+
-
+
Once it is completed, select Continue
.
If you have the option to Install BootMii as boot2
, please do so as well.
-
+
Select Exit
.
Your console will have booted into the Homebrew Channel.
diff --git a/homebrew-dolphin.html b/homebrew-dolphin.html
index a4ecf5e1c..3309f2b96 100644
--- a/homebrew-dolphin.html
+++ b/homebrew-dolphin.html
@@ -387,19 +387,19 @@ window.cookieconsent.initialise({
If you have not already done so, install the Wii Menu on Dolphin Emulator by going to Tools > Perform System Update
.
-
+
Download Open_HBC_(version)_LULZ.wad
from the page linked above.
Open Dolphin Emulator.
Select Tools > Install WAD
and select the Open_HBC_(version)_LULZ.wad
file that was downloaded.
-
+
Select Tools > Load Wii System Menu
. The channel should now appear.
-
+
@@ -413,12 +413,12 @@ window.cookieconsent.initialise({
Extract any homebrew apps to the WiiSDSync
folder. The end result should look something like this:
-
+
Load the Wii Menu and open the Homebrew Channel. Your newly installed apps should appear!
-
+
diff --git a/letterbomb.html b/letterbomb.html
index 93052be8c..657e2e019 100644
--- a/letterbomb.html
+++ b/letterbomb.html
@@ -394,13 +394,13 @@ window.cookieconsent.initialise({
Also, ensure that you are on System Menu version 4.3.
-
+
Navigate to Internet
> Console Information
.
Take note of your FULL MAC address.
-
+
On your computer, open the browser and go to the HackMii website.
Input your Wii MAC address and region.
@@ -408,7 +408,7 @@ window.cookieconsent.initialise({
Cut either wire.
-
+
Insert your SD card into your computer.
Copy the private
folder and the boot.elf
file from the LetterBomb .zip
to the root of your SD card.
@@ -431,7 +431,7 @@ window.cookieconsent.initialise({
If the exploit was successful, your device will have loaded the HackMii Installer.
-
+
Continue to Homebrew Channel and BootMii Installation
diff --git a/nintendont.html b/nintendont.html
index 377fed67c..f3654f4a4 100644
--- a/nintendont.html
+++ b/nintendont.html
@@ -412,7 +412,7 @@ window.cookieconsent.initialise({
User Interface
-
+
Nintendont uses a user interface that is mainly controllable and navigable using a gamepad.
diff --git a/osc.html b/osc.html
index 1ec5ef9f8..12bb141dc 100644
--- a/osc.html
+++ b/osc.html
@@ -401,7 +401,7 @@ window.cookieconsent.initialise({
Download the reccomended .zip
file from the Open Shop Channel website.
-
+
Extract the apps
folder in the archive to the root of your SD card or USB drive. Optionally, the archive also comes with a guide on how to use the Homebrew Browser.
Insert your SD card or USB drive into your Wii, and go to the Homebrew Channel. The Homebrew Browser should now display.
@@ -423,18 +423,18 @@ window.cookieconsent.initialise({
Download oscdl-installer.exe
and run the installer. Optionally, you may instead download oscdl-standalone.exe
, which does not have to be installed and instead runs as a portable executable.
-
+
If you get a User Account Control pop-up that asks whether or not you would like the program to make changes to your PC, select Yes. Open Shop Channel is a safe application.
Let the installer run, and then launch OSCDL once the process is finished.
-
+
Find an application that you would like to get, and press the Download button. Alternatively, you can send the app directly to your Wii (this requires that your computer and Wii be on the same network).
-
+
A .zip
file containing your app should download to wherever you specified the directory to be. Extract the apps
folder in this archive to the root of your SD card or USB drive.
Insert your SD card or USB drive into your Wii, and go to the Homebrew Channel. Your downloaded piece of homebrew should now display.
diff --git a/priiloader.html b/priiloader.html
index c41121a50..ebfd9f152 100644
--- a/priiloader.html
+++ b/priiloader.html
@@ -430,9 +430,9 @@ There are some important things to take note of:
Press the + Button on Wii Remote or the A Button on a GameCube controller.
-
+
-
+
Press A to return to the Homebrew Channel.
@@ -441,7 +441,7 @@ There are some important things to take note of:
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu:
-
+
To enter it later on, simply run the “Load Priiloader” homebrew app. There are also other ways to enter Priiloader:
@@ -460,7 +460,7 @@ There are some important things to take note of:
Scroll down to System Menu Hacks
and press A
.
-
+
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time.
Doing so will cause Priiloader to fail to find the hacks_hash.ini
file.
@@ -470,7 +470,7 @@ There are some important things to take note of:
It is advised to enable “Block Disc Updates”, “Block Online Updates”, and “Region Free EVERYTHING”.
-
+
Scroll down to save settings
and press A.
Press B
to return to the main menu.
@@ -628,30 +628,30 @@ These guidelines list ways that to avoid bricking your Wii, beyond just having B
Scroll down to Load/Install file
and press A.
-
+
Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.
-
+
-
+
Press B
to return to the main menu.
Scroll down to Settings
and press A.
-
+
Press Right to cycle through the Autoboot options until Installed file
is selected.
-
+
Scroll down to save settings
and press A.
-
+
Press B
to return to the main menu.
Scroll back up to System Menu
and press A.
@@ -667,7 +667,7 @@ These guidelines list ways that to avoid bricking your Wii, beyond just having B
Scroll down to Settings
and press A.
-
+
Press Right to cycle through the Autoboot options until your desired option is selected.
@@ -676,12 +676,12 @@ These guidelines list ways that to avoid bricking your Wii, beyond just having B
Please don’t set Autoboot to BootMii IOS
. You will get stuck in a loop until you continuously hold the RESET button to enter the Priiloader menu.
-
+
Scroll down to save settings
and press A.
-
+
Press B
to return to the main menu.
Scroll back up to System Menu
and press A.
diff --git a/riiconnect24.html b/riiconnect24.html
index 976b7072d..02f213967 100644
--- a/riiconnect24.html
+++ b/riiconnect24.html
@@ -412,54 +412,54 @@ window.cookieconsent.initialise({
Press 1 to choose “Start
” and confirm your selection by pressing ENTER
.
-
+
Select the device you’re patching for.
-
+
For this guide, choose “Install RiiConnect24 on your Wii
”
-
+
Choose “Express (Recommended)
”. It will give you everything you need.
-
+
Select your region.
-
+
While you’re at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. [X]
represents the options that selected. Just press 5 and ENTER
if you’re not interested.
-
+
Connect your SD Card or USB Drive to your computer and select “1
”.
-
+
If your device was detected successfully, select “1
”. If not, make sure there’s a folder called apps
on your SD Card or USB Drive and try again.
-
+
The patcher will download apps now - please be patient.
-
+
Once you reach the screen that says Patching done
, you can exit the patcher. All the files should already be on your SD card.
-
+
-
+
If it did not copy everything automatically to your SD Card or USB Device, copy the WAD
and apps
folder next to RiiConnect24Patcher.bat
or RiiConnect24Patcher.sh
to your SD Card or USB Device.
diff --git a/str2hax.html b/str2hax.html
index 54e3ede15..00a9a4db7 100644
--- a/str2hax.html
+++ b/str2hax.html
@@ -404,50 +404,50 @@ window.cookieconsent.initialise({
Go to Wii Options
.
-
+
Go to Wii Settings
.
-
+
Navigate to Page 2
-> Internet
-> Connection Settings
.
-
+
-
+
Click on your network connection slot and navigate to Change Settings
.
-
+
-
+
Set Auto-Obtain DNS
to No
, then click Advanced Settings
.
-
+
Set the Primary DNS to 18.188.135.9
.
-
+
If there are 3 fields instead of 2 (like above), go back and make sure you are on the Auto-Obtain DNS
page.
Click Confirm
, then click Save
.
-
+
When prompted, click OK
to perform the connection test.
-
+
-
+
- If the connection test was successful, select
No
to skip the Wii System Update.
@@ -467,13 +467,13 @@ window.cookieconsent.initialise({
- You should be greeted with the following screen:
-
+
Give the exploit 1-2 minutes to download (and don’t press I ACCEPT
/I DO NOT ACCEPT
).
If the exploit was successful, your device will have loaded the HackMii Installer.
-
+
diff --git a/syscheck.html b/syscheck.html
index 40fe3352d..2258cdf33 100644
--- a/syscheck.html
+++ b/syscheck.html
@@ -398,13 +398,13 @@ window.cookieconsent.initialise({
When “This IOS will be tested (Please select)” is shown on the screen, press A.
-
+
Wait for the program to get some information about your IOS.
After it finishes, press the A
Button if you want to view the log.
-
+
If you want to share the SysCheck, you can press the A
Button, which will upload it to syscheck.rc24.xyz and give you a link. You can also share the sysCheck.csv
saved to the root of your SD Card or USB Drive. The IOSsysCheck.log
file (saved to the root as well) contains additional information about your IOS.
diff --git a/themes.html b/themes.html
index 1c71e5028..213e6ffe9 100644
--- a/themes.html
+++ b/themes.html
@@ -453,14 +453,14 @@ window.cookieconsent.initialise({
Select your storage medium, and you should now see a selection of your themes.
-
+
Select the theme you would like to install. If it is signed, MyMenuifyMod will indicate it to you, otherwise it will warn you. Be absolutely sure at this point that you have downloaded the correct theme for your system menu version and region.
Install the theme.
Reboot into the Wii Menu, and see if the theme successfully installed. If all goes well, you will have a result similar to the below!
-
+
@@ -526,28 +526,28 @@ window.cookieconsent.initialise({
Download a theme .zip
file from the website linked above.
-
+
Paste the .zip
into the apps
folder on your storage device where you load homebrew.
-
+
Extract the contents of the .zip
into the apps
folder, and delete the archive.
-
+
Reinsert the storage device into your Wii and enter the Homebrew Channel.
The theme you just installed can be loaded in the same way that you access a standard app.
-
+
The theme should now be loaded, enjoy!
-
+
diff --git a/transfer-saves.html b/transfer-saves.html
index 0bd258c54..4bf020388 100644
--- a/transfer-saves.html
+++ b/transfer-saves.html
@@ -544,7 +544,7 @@ This also has the benefit of allowing access to Wi
If you are exporting all your Wii saves from Dolphin, select Tools > Export All Wii Saves
.
-
+
In the folder dialog that pops up, select your SD card. (Don’t go inside any other folder!)
Safely eject your SD card, then put it into your Wii/Wii U.
@@ -613,7 +613,7 @@ This also has the benefit of allowing access to Wi
In the main menu, select File > Open User Folder
.
-
+
In the folder that opens, navigate to GC > [Save region] > Card A
.
Copy the .gci
files you would like to put on your Memory Card.
@@ -621,7 +621,7 @@ This also has the benefit of allowing access to Wi
If Dolphin is set to use a .raw
memory card, use Tools > Memory Card Manager
to export your desired saves to .gci
.
-
+
- Download and extract GCMM to the root of your SD card or USB drive.
@@ -630,24 +630,24 @@ This also has the benefit of allowing access to Wi
-
Select the device you have copied the .gci
files to.
-
+
-
Press +
/X
to enter Restore mode.
-
+
-
Select the slot that has your Memory card.
-
+
- Select the save you would like to restore.
- If you would like to restore all the saves in
MCBACKUP
, press 1
/R
.
-
+
- When restoration is complete, press any button to continue.
@@ -706,17 +706,17 @@ Otherwise, if Dolphin is storing your saves in a
+
Press B
and -
/L
and Y
to enter Raw backup mode.
-
+
Select the slot that has your memory card.
-
+
When the dump is complete, press any key to continue.
Press HOME/START to exit GCMM.
@@ -748,17 +748,17 @@ Otherwise, if Dolphin is storing your saves in a
+
Press B
and -
/L
and Y
to enter Raw backup mode.
-
+
Select the slot that has your memory card.
-
+
When the dump is complete, press any key to continue.
Press HOME/START to exit GCMM.
@@ -799,13 +799,13 @@ Otherwise, if Dolphin is storing your saves in a
+
Select Data Management > Save Data > Nintendo GameCube
.
Select the save you would like to copy and select Copy
.
-
+
@@ -873,24 +873,24 @@ Otherwise, if Dolphin is storing your saves in a .gci
files to.
-
+
Press +
/X
to enter Restore mode.
-
+
Select the slot that has your Memory card.
-
+
Select the save you would like to restore.
- If you would like to restore all the saves in
MCBACKUP
, press 1
/R
.
-
+
When restoration is complete, press any button to continue.
diff --git a/usb-loaders.html b/usb-loaders.html
index a56af6210..de35c4600 100644
--- a/usb-loaders.html
+++ b/usb-loaders.html
@@ -416,7 +416,7 @@ Due to the age and lack of support for Configurable USB Loader (last update was
While the original WiiFlow was last updated in 2014, the WiiFlow Lite fork is still recieving regular updates.
-
+
USB Loader GX is primarily modeled after the Wii Menu, and supports themes.
@@ -425,7 +425,7 @@ Due to the age and lack of support for Configurable USB Loader (last update was
- USB Loader GX still recieves regular updates.
-
+
@@ -487,7 +487,7 @@ When you click on a game, you are given these options:
House - Opens the menu below. The menu can also be launched by pressing the home button.
-
+
- Help Guide - Shows all the controls you can use in WiiFlow.
diff --git a/wiibackupmanager.html b/wiibackupmanager.html
index 17d836cb1..d587cf8fa 100644
--- a/wiibackupmanager.html
+++ b/wiibackupmanager.html
@@ -410,24 +410,24 @@ You may format it as NTFS, but it won’t work with a majority of apps (eg. The
-
Go to the Drive 1
tab, then select the drive that you’re putting the Wii games on.
-
+
- Go to the
Files
tab, then select Add
.
- Select
Files
to add multiple games to the program, or select Folder
to add a whole folder of games.
-
+
-
Go to Select
, then click Games not on drive 1
.
-
+
-
Select Transfer
, then select Drive 1
to transfer the games over. It might take a while for the games to copy over.
-
+
diff --git a/wiigsc.html b/wiigsc.html
index 51f4274c2..1e7d19e00 100644
--- a/wiigsc.html
+++ b/wiigsc.html
@@ -392,12 +392,12 @@ window.cookieconsent.initialise({
-
Install WiiGSC, then right click on it and choose Run as administrator. If you do not do this, WiiGSC will throw an error when you open it.
-
+
-
Select the path to the ISO or WBFS file on your USB drive, and select the USB Loader you use. The other options should be fine the way they are.
-
+
-
Install the generated WAD with your WAD manager.
diff --git a/wiimmfi.html b/wiimmfi.html
index c6222c118..233575cac 100644
--- a/wiimmfi.html
+++ b/wiimmfi.html
@@ -433,7 +433,7 @@ See this page for more details.
You should see the Priiloader menu.
-
+
- Go to
System Menu Hacks
.
If you used a USB drive to install Priiloader, make sure you do not have an SD card inserted at the same time.
@@ -441,7 +441,7 @@ See this page for more details.
Make sure the Wiimmfi patch v4
hack is enabled.
-
+
- Scroll to
Save Settings
and save your changes.
- Return to the main menu, and press
System Menu
to return to the Wii Menu.
@@ -525,7 +525,7 @@ To solve this issue, Wiimmfi has a custom DNS server that can be ran on your PC
-
Go to Wii Settings > Internet > Connection Settings
and select whatever connection you are using. Then, Change Settings > Auto-Obtain DNS NO > Advanced Settings
. Set your primary DNS to 95.217.77.151
, and your secondary DNS to 1.1.1.1
.
-
+
- Let the connection test finish, and do not perform a Wii System Update.
- Go back twice to
Internet
, and press User Agreements
. Then, confirm that you would like to use WC24 and the Wii Shop Channel.
diff --git a/wilbrand.html b/wilbrand.html
index 3b63b110a..973b3dccc 100644
--- a/wilbrand.html
+++ b/wilbrand.html
@@ -406,13 +406,13 @@ Wilbrand Web is recommended for its ease of use.
- This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
-
+
Navigate to Internet
> Console Information
.
Take note of your FULL MAC address.
-
+
On your computer, open the browser and go to wilbrand.donut.eu.org.
Input your Wii MAC, version and region.
@@ -420,7 +420,7 @@ Wilbrand Web is recommended for its ease of use.
Cut either wire.
-
+
Click on “Download your .zip”.
Insert your SD card into your computer.
@@ -439,7 +439,7 @@ Wilbrand Web is recommended for its ease of use.
If you don’t see the green letter, check if any errors appear in the SD card section of Data Management
. If there are errors, there may be an issue with the SD card format or the Wii’s SD card reader.
-
+
If the exploit was successful, your device will have loaded the HackMii Installer.
@@ -474,13 +474,13 @@ Wilbrand Web is recommended for its ease of use.
- This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
-
+
Navigate to Internet
> Console Information
.
Take note of your FULL MAC address.
-
+
Copy all files from the Wilbrand .zip
to a folder on your computer
Insert your SD card into your computer.
@@ -494,7 +494,7 @@ Wilbrand Web is recommended for its ease of use.
X:
is the drive letter of your SD card.
-
+
Linux/macOS: ./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir
@@ -502,7 +502,7 @@ Wilbrand Web is recommended for its ease of use.
/media/mount_dir
is the folder your SD card is mounted in. This may vary depending on your Linux distro.
-
+
@@ -522,7 +522,7 @@ Wilbrand Web is recommended for its ease of use.
If you don’t see the green letter, check if any errors appear in the SD card section of Data Management
. If there are errors, there may be an issue with the SD card format or the Wii’s SD card reader.
-
+
If the exploit was successful, your device will have loaded the HackMii Installer.
diff --git a/yawmme.html b/yawmme.html
index a2046bee9..d7dc612c9 100644
--- a/yawmme.html
+++ b/yawmme.html
@@ -398,28 +398,28 @@ This tutorial will show you how to install WADs.
Select the source device that has the WAD file(s) you would like to install.
-
+
Navigate to the folder that has the WAD files.
- If you have a folder named
wad
, it will be opened automatically.
-
+
Navigate to the WAD file you would like to install and press A
.
- If you would like to install multiple WAD files at once, press
+
on each of them, then press A
.
-
+
Press A again to install the WAD(s).
-
+
-
+