BootMii screenshots overhaul (#21)

* BootMii screenshots overhaul

- Added information about failed to verify blocks on bootmii.md, specifying when it is and isn't OK to have them
- Added further information about the NAND restore process to bootmiirecover.md

* Removal of other alt-image names to provide parity with #18

* bootmiirecover: fix image indents

---------

Co-authored-by: lifehackerhansol <lifehackerhansol@ds-homebrew.com>

_pages/en_US/bootmii.md

@@ -34,26 +34,33 @@ If you have BootMii installed as boot2, you will need to launch BootMii by resta
 1. Launch the Homebrew Channel.
 1. Press the HOME Button, then select "Launch BootMii".
 
+    ![](/images/bootmii/BootMii_HBC.png)
+
+1. You should see an image similar to the below now on your screen:
+
     ![](/images/bootmii/BootMii_Main.png)
 
 1. Select the Options button (the icon with the gears).
 
-    ![](/images/bootmii/BootMii_Gears_Icon.png)
+    ![](/images/bootmii/BootMii_Gears.png)
 
 1. Select the first button to the left.
-    + A NAND backup will start. You can watch the progress on the screen.
+
+    ![](/images/bootmii/BootMii_Backup.png)
+
+1. A NAND backup will start. You can watch the progress on the screen.
     + "Bad Blocks" are normal, and mostly originate from the factory due to NAND binning. Don't worry when you see some on a NAND backup.
-    + After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
-
-    ![](/images/bootmii/BootMii_Green_Arrow.png)
-
-1. When the process is complete, exit the NAND backup screen by pressing any button.
 
     ![](/images/bootmii/BootMii_NAND_Backup.png)
 
+1. After the previous step completes, BootMii will verify the backup. Ideally, all the blocks should be green after the verification process.
+    + If you have factory bad blocks with uncorrectable pages, these blocks may fail to verify. As long all non-bad blocks are successfully verified, this should be fine.
+
+    ![](/images/bootmii/BootMii_NAND_Backup_Verify.png)
+
 1. Press the Back button (the one with an arrow), then press either the Wii Menu button or the Homebrew Channel button to exit BootMii.
 
-    ![](/images/bootmii/BootMii_Return_Arrow.png)
+    ![](/images/bootmii/BootMii_Return.png)
 
 <div id="restore-notice" class="notice" markdown="1">
 Note: **restoring a NAND backup is usually a last resort**. There often better ways to unbrick your console.

_pages/en_US/bootmiirecover.md

@@ -43,17 +43,38 @@ If you want to restore a game's save data, use Dolphin to import your NAND backu
 
 1. Launch the Homebrew Channel.
 1. Press the HOME Button, then select "Launch BootMii".
+    + If the Homebrew Channel is inaccessible and you have Priiloader installed, you may also access it on boot and select `BootMii IOS` to load BootMii.
+
+    ![](/images/bootmii/BootMii_HBC.png)
+
 1. Select the Options button (the icon with the gears).
 
-    ![](/images/BootMii/BootMii_Gears_Icon.png)
+    ![](/images/bootmii/BootMii_Gears.png)
 
 1. Select the RestoreMii button.
 
-    ![](/images/BootMii/BootMii_Red_Arrow.png)
+    ![](/images/bootmii/BootMii_Restore.png)
+
+1. BootMii will inform you that it will run in SIMULATION mode, you can press A or Reset to continue.
+
+    ![](/images/bootmii/BootMii_NAND_Simulation.png)
 
 1. If BootMii is installed as IOS, input the Konami code on your GameCube controller: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
+
+    ![](/images/bootmii/BootMii_NAND_Konami.png)
+
+1. BootMii will run through the restore process as a simulation, detailing what will be erased and rewritten. Once this is done, you have one final chance to back out of the restoration process. Otherwise, press START or the Eject button to begin.
+
+    ![](/images/bootmii/BootMii_NAND_Restore.png)
+
 1. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
 
+    ![](/images/bootmii/BootMii_NAND_Restore_Success.png)
+
+1. Press the Back button (the one with an arrow), then press either the Wii Menu button or the Homebrew Channel button to exit BootMii.
+
+    ![](/images/bootmii/BootMii_Return.png)
+
 If you were restoring a NAND backup in order to repair a brick and this did not fix your issue, please consult [the bricks portion](bricks) of this guide.
 {: .notice--info}