diff --git a/_pages/en_US/bootmiirecover.md b/_pages/en_US/bootmiirecover.md
index c279b4ba4..14de5dd8f 100644
--- a/_pages/en_US/bootmiirecover.md
+++ b/_pages/en_US/bootmiirecover.md
@@ -39,15 +39,15 @@ If you have BootMii installed as boot2, you will need to launch BootMii by resta
{: .notice}
1. Launch the Homebrew Channel.
-2. Press the HOME Button, then select "Launch BootMii".
+1. Press the HOME Button, then select "Launch BootMii".
-You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad
-on a GameCube controller. To select, press A.
-{: .notice--info}
+ You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad
+ on a GameCube controller. To select, press A.
+ {: .notice--info}
-3. Select the Options button (the icon with the gears).
+1. Select the Options button (the icon with the gears).
-4. Select the RestoreMii button.
+1. Select the RestoreMii button.
-5. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
-6. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
+1. On your GameCube controller, input the Konami code: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
+1. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
diff --git a/_pages/en_US/cios.md b/_pages/en_US/cios.md
index fefc5bd17..f5dcd3397 100644
--- a/_pages/en_US/cios.md
+++ b/_pages/en_US/cios.md
@@ -47,59 +47,60 @@ If you are not on Windows, you may download & run [this script](/assets/files/d2
The WAD files should be on your SD card like this:
{: .notice--info}
+
##### Section II - Installing
1. Download the d2x cIOS installer and extract the zip to the root of your SD card or USB drive.
1. Insert the SD card or USB drive into your Wii, and launch the d2x cIOS Installer from the Homebrew Channel
1. Press A to continue, then set the options to the following:
-```
-Select cIOS: d2x-v11-beta1
-Select cIOS base: 38
-Select cIOS slot: 248
-Select cIOS version: 65535
-```
+ ```
+ Select cIOS: d2x-v11-beta1
+ Select cIOS base: 38
+ Select cIOS slot: 248
+ Select cIOS version: 65535
+ ```
-If `d2x-v11-beta1` isn't showing up, try select the cIOS base first, then check again. This can also happen if your SD card is locked.
-{: .notice--info}
+ If `d2x-v11-beta1` isn't showing up, try select the cIOS base first, then check again. This can also happen if your SD card is locked.
+ {: .notice--info}
-
+ 
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
-```
-Select cIOS: d2x-v11-beta1
-Select cIOS base: 56
-Select cIOS slot: 249
-Select cIOS version: 65535
-```
+ ```
+ Select cIOS: d2x-v11-beta1
+ Select cIOS base: 56
+ Select cIOS slot: 249
+ Select cIOS version: 65535
+ ```
-
+ 
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
-```
-Select cIOS: d2x-v11-beta1
-Select cIOS base: 57
-Select cIOS slot: 250
-Select cIOS version: 65535
-```
+ ```
+ Select cIOS: d2x-v11-beta1
+ Select cIOS base: 57
+ Select cIOS slot: 250
+ Select cIOS version: 65535
+ ```
-
+ 
1. Once set, press A twice to install.
1. When done installing, press A to return, and set the options to the following:
-```
-Select cIOS: d2x-v11-beta1
-Select cIOS base: 58
-Select cIOS slot: 251
-Select cIOS version: 65535
-```
+ ```
+ Select cIOS: d2x-v11-beta1
+ Select cIOS base: 58
+ Select cIOS slot: 251
+ Select cIOS version: 65535
+ ```
-
+ 
1. Once set, press A twice again to install, and then exit once done.
@@ -137,6 +138,7 @@ To change the cIOS used for a specific game, follow these instructions:
- Try using 250 or 251, if 249 doesn't work.
1. Press Save and try to load the game.
+
##### Options once complete
[Continue to the Homebrew Browser](hbb)
diff --git a/_pages/en_US/dump-wads.md b/_pages/en_US/dump-wads.md
index 27057e67a..1a9dc6d36 100644
--- a/_pages/en_US/dump-wads.md
+++ b/_pages/en_US/dump-wads.md
@@ -17,19 +17,20 @@ This tutorial will explain you how to dump WADs from your Wii System Memory.
2. Insert your SD card or USB drive into your Wii, and launch Yet Another BlueDump MOD from the Homebrew Channel.
##### Section II - Dumping
+
1. Press the A Button.
-
+ 
-2. Choose `Installed Channel Titles`.
-
+1. Choose `Installed Channel Titles`.
+ 
-3. Find the content you want to dump and press the 1 Button.
-
+1. Find the content you want to dump and press the 1 Button.
+ 
-4. Choose `Backup to WAD`.
-5. At the prompt to `Fakesign the ticket`, choose `Yes`.
-6. At the prompt to `Fakesign the TMD`, choose `No`.
-7. At the prompt to `Change the output WAD region`, choose `No`.
+1. Choose `Backup to WAD`.
+1. At the prompt to `Fakesign the ticket`, choose `Yes`.
+1. At the prompt to `Fakesign the TMD`, choose `No`.
+1. At the prompt to `Change the output WAD region`, choose `No`.
You have now dumped that WAD. It should appear on your SD card.
diff --git a/_pages/en_US/flashhax.md b/_pages/en_US/flashhax.md
index e5b94984e..947d2e9ed 100644
--- a/_pages/en_US/flashhax.md
+++ b/_pages/en_US/flashhax.md
@@ -12,8 +12,8 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann
#### Instructions
1. Open up the Internet Channel on your Wii.
-2. Go to flashhax.com in the browser and bookmark the page.
-3. Open the site from the bookmark. It'll then proceed to download and load the HackMii Installer. It may take some time as it is downloading the installer over the Internet.
+1. Go to flashhax.com in the browser and bookmark the page.
+1. Open the site from the bookmark. It'll then proceed to download and load the HackMii Installer. It may take some time as it is downloading the installer over the Internet.
If the HackMii Installer doesn't load and it instead freezes (you can't move your cursor), please restart your Wii and repeat step 3 until it works. It might take multiple tries, be persistent!
diff --git a/_pages/en_US/gcbackupmanager.md b/_pages/en_US/gcbackupmanager.md
index a1750397f..cd8f7c6f0 100644
--- a/_pages/en_US/gcbackupmanager.md
+++ b/_pages/en_US/gcbackupmanager.md
@@ -22,14 +22,14 @@ Make sure your USB drive is formatted as FAT32. Do not format it as other types
##### Section I - Downloading
1. Extract GameCube Backup Manager, and launch the program.
-2. Insert your USB drive into your computer.
+1. Insert your USB drive into your computer.
##### Section II - Copying Games Over
1. Open the application and locate the folder button in the bottom right corner. Click on it to open the file explorer window.
-2. Navigate to the location of the game file you want to transfer. This could be on your computer's hard drive or an external storage device. Once you find the file, select it by clicking on it.
-3. Click on the `Files (Destination)` tab, then select the `Inactive` option from the dropdown menu. This will allow you to choose the drive where you want to transfer the game. Select the appropriate drive letter from the list.
-4. Next, go back to the `Files (Source)` tab, select the game you want to transfer, and then click either `Install Game (1:1)` or `Install Game (Scrub)`.
+1. Navigate to the location of the game file you want to transfer. This could be on your computer's hard drive or an external storage device. Once you find the file, select it by clicking on it.
+1. Click on the `Files (Destination)` tab, then select the `Inactive` option from the dropdown menu. This will allow you to choose the drive where you want to transfer the game. Select the appropriate drive letter from the list.
+1. Next, go back to the `Files (Source)` tab, select the game you want to transfer, and then click either `Install Game (1:1)` or `Install Game (Scrub)`.
Selecting `Install Game (Scrub)` will remove unnecessary data from the game, reducing the game's file size.
{: .notice--info}
diff --git a/_pages/en_US/gcsaves.md b/_pages/en_US/gcsaves.md
index 10597baa2..7674bf92e 100644
--- a/_pages/en_US/gcsaves.md
+++ b/_pages/en_US/gcsaves.md
@@ -30,21 +30,21 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
##### Downloading
1. Extract GCMM and put it in the `apps` folder on your SD card or USB drive.
-2. Place the `.gci` file in a folder called `MCBACKUP` on the root of the SD card or USB drive.
-3. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
+1. Place the `.gci` file in a folder called `MCBACKUP` on the root of the SD card or USB drive.
+1. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
##### Restoring
1. Insert your physical memory card into Slot A or Slot B.
-2. Select the device you want to restore from.
+1. Select the device you want to restore from.
-3. In GCMM, Press X on a GameCube controller or + on a Wii remote.
+1. In GCMM, Press X on a GameCube controller or + on a Wii remote.
-4. Select the slot your memory card is in.
+1. Select the slot your memory card is in.
-5. Select the save you want to restore. If you have multiple saves to restore, you can press R on the GameCube controller or 1 on the Wii remote to restore all of your saves.
+1. Select the save you want to restore. If you have multiple saves to restore, you can press R on the GameCube controller or 1 on the Wii remote to restore all of your saves.
-6. When restoration is complete, press any button to continue.
+1. When restoration is complete, press any button to continue.
## Backing Up A Save (.gci File) to an SD or USB From a Physical Memory Card
@@ -59,21 +59,21 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
##### Downloading
1. Extract GCMM and put it in the `apps` folder on your SD card or USB drive.
-2. Place the `.gci` file in a folder called `MCBACKUP` on the root of the SD card or USB drive.
-3. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
+1. Place the `.gci` file in a folder called `MCBACKUP` on the root of the SD card or USB drive.
+1. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
##### Backing Up
1. Insert your physical memory card into slot A or slot B.
-2. Select the device you want to backup to.
+1. Select the device you want to backup to.
-3. In GCMM, Press Y on a GameCube controller or - on a Wii remote.
+1. In GCMM, Press Y on a GameCube controller or - on a Wii remote.
-4. Select the slot your memory card is in.
+1. Select the slot your memory card is in.
-5. Select the save you want to backup. If you have multiple saves to backup, you can press R on the GameCube controller or 1 on the Wii remote to backup all of your saves.
+1. Select the save you want to backup. If you have multiple saves to backup, you can press R on the GameCube controller or 1 on the Wii remote to backup all of your saves.
-6. When backing up is complete, press any button to continue.
+1. When backing up is complete, press any button to continue.
## Backing Up Your Physical Memory Card Into an Emulated Memory Card (.raw file)
@@ -88,16 +88,16 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
##### Downloading
1. Extract GCMM and put it in the `apps` folder on your SD card or USB drive.
-2. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
+1. Insert your SD card or USB drive into your Wii and launch GCMM from the Homebrew Channel.
#### Dumping the .raw
1. Insert your memory card into Slot A or Slot B.
-2. Select the device you want to dump to.
+1. Select the device you want to dump to.
-3. Press L and Y at the same time on GameCube Controller or B and - at the same time on the Wii remote to backup your to a .raw file and select the slot your memory card is in.
+1. Press L and Y at the same time on GameCube Controller or B and - at the same time on the Wii remote to backup your to a .raw file and select the slot your memory card is in.
-4. When the dump is complete, press any button to continue. It should be saved in a folder on the root of your SD or USB called `MCBACKUP`.
+1. When the dump is complete, press any button to continue. It should be saved in a folder on the root of your SD or USB called `MCBACKUP`.
## Restoring an Emulated Memory Save to a Physical Memory Card
@@ -110,14 +110,14 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
#### Instructions
1. If you are trying to restore a save from Dolphin, go to the `File` tab in Dolphin, select open user folder, open the GC folder, and find the `.raw` file.
-2. If you are restoring a Nintendont emulated memory card save, navigate to the `saves` folder on the root of your SD card or USB.
-3. Insert your memory card into Slot A or Slot B.
-4. Select the device you want to restore from.
+1. If you are restoring a Nintendont emulated memory card save, navigate to the `saves` folder on the root of your SD card or USB.
+1. Insert your memory card into Slot A or Slot B.
+1. Select the device you want to restore from.
-5. Press L and X at the same time on GameCube controller or B and + at the same time on the Wii remote.
-6. Select the slot your memory card is in.
+1. Press L and X at the same time on GameCube controller or B and + at the same time on the Wii remote.
+1. Select the slot your memory card is in.
-7. It should restore the .raw file to your memory card. When restoration is complete, press any button to continue.
+1. It should restore the .raw file to your memory card. When restoration is complete, press any button to continue.
## Transferring Saves Between 2 Physical Memory Cards
@@ -129,7 +129,7 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
### Instructions
1. Insert both memory cards into the Wii.
-2. From the System menu, navigate into `Wii Options`, `Data Management`, `Save Data`, `Nintendo GameCube`.
+1. From the System menu, navigate into `Wii Options`, `Data Management`, `Save Data`, `Nintendo GameCube`.
@@ -138,7 +138,7 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
-3. Find the save you want, select it and select `Move or Copy`.
+1. Find the save you want, select it and select `Move or Copy`.
[Continue to site navigation](site-navigation)
We have many other tutorials that you might like.
diff --git a/_pages/en_US/hbb.md b/_pages/en_US/hbb.md
index 5d2c45eaa..5fc66d11d 100644
--- a/_pages/en_US/hbb.md
+++ b/_pages/en_US/hbb.md
@@ -22,7 +22,7 @@ The [Open Shop Channel](https://oscwii.org/) is where you can go to get homebrew
#### Instructions
1. Extract the Homebrew Browser and put it in the `apps` folder on your SD card or USB drive.
-2. Insert your SD card or USB drive into your Wii. You can now launch the Homebrew Browser from the Homebrew Channel if you want to.
+1. Insert your SD card or USB drive into your Wii. You can now launch the Homebrew Browser from the Homebrew Channel if you want to.
#### Recommended Apps
diff --git a/_pages/en_US/hbc-mini.md b/_pages/en_US/hbc-mini.md
index c1dbc8824..833ede136 100644
--- a/_pages/en_US/hbc-mini.md
+++ b/_pages/en_US/hbc-mini.md
@@ -16,11 +16,11 @@ While it is possible to install BootMii on a Wii mini, you will need to solder a
{: .notice--info}
1. You will see a scam warning screen. Wait 30 seconds for the text "Press 1 to continue" to appear, then press 1.
-
+ 
1. Press `Continue`, then select `Install The Homebrew Channel`.
-
-
+ 
+ 
1. Press `Continue` when finished.
1. Once done, select `Exit` to exit the HackMii installer.
diff --git a/_pages/en_US/hbc.md b/_pages/en_US/hbc.md
index cce8f01fd..60245edb2 100644
--- a/_pages/en_US/hbc.md
+++ b/_pages/en_US/hbc.md
@@ -12,32 +12,31 @@ BootMii is a piece of software that can backup and restore your Wii's NAND stora
#### Instructions
1. You will see a scam warning screen. Wait 30 seconds for the text "Press 1 to continue" to appear, then press 1.
-
+ 
1. You will be presented with a test results screen. Select `Continue`.
-
+ 
-If BootMii says that it `can only be installed as an IOS`, that's normal.
-{: .notice--info}
+ If BootMii says that it `can only be installed as an IOS`, that's normal.
+ {: .notice--info}
1. Select `Install the Homebrew Channel`.
-
-
+ 
+ 
1. Select `Continue` when finished.
1. Once installed, select `Back`, then select `BootMii`.
-
+ 
1. Select `Install BootMii as IOS`.
-If you do not have an SD card, you cannot install nor use BootMii, and therefore will not be able to utilize any of the mentioned benefits.
-You can always [install it at a later date](hackmii).
-{: .notice--warning}
+ If you do not have an SD card, you cannot install nor use BootMii, and therefore will not be able to utilize any of the mentioned benefits.
+ You can always [install it at a later date](hackmii).
+ {: .notice--warning}
-
-
-
-
+ 
+ 
+ 
+ 
1. Once done, select `Continue`.
-1. If you have the option to `Install BootMii as boot2`, please do so as well. This offers the best possible brick protection you can have.
-Otherwise, skip this step.
+1. If you have the option to `Install BootMii as boot2`, please do so as well. This offers the best possible brick protection you can have. Otherwise, skip this step.
1. Select `Exit` to finally open the Homebrew Channel.
diff --git a/_pages/en_US/priiloader.md b/_pages/en_US/priiloader.md
index b98767e3b..a28b975f9 100644
--- a/_pages/en_US/priiloader.md
+++ b/_pages/en_US/priiloader.md
@@ -62,9 +62,9 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
1. Scroll down to `System Menu Hacks` and press `A`.
-If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time.
-This causes Priiloader to fail to find the `hacks_hash.ini` file.
-{: .notice--warning}
+ If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time.
+ This causes Priiloader to fail to find the `hacks_hash.ini` file.
+ {: .notice--warning}
1. Press `A` on each hack you would like to enable. We recommend that you enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING".
@@ -121,11 +121,11 @@ Priiloader allows you to automatically boot to the Homebrew Channel, an individu
{% capture UNEO %}
If you would like to autoboot USB loader GX, do this first:
- * Download the USB Loader GX forwarder WAD ([Wii](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders/USB%20Loader%20GX-UNEO_Forwarder_5_1_AHBPROT.wad), [vWii](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders/USB%20Loader%20GX-UNEO_Forwarder_5_1_AHBPROT_vWii%20%28Fix%29.wad)).
- * Download the [UNEO Channel Booter for Priiloader](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders%20dols/UNEO%20Channel%20Booter%20for%20Priiloader.zip/download).
- * Install the forwarder WAD with a WAD manager like [YAWM ModMii Edition](yawmme).
- * Extract the `UNEO Channel Booter for Priiloader.zip` file anywhere.
- * Copy `uneoboot.dol` to the root of your SD card.
+ * Download the USB Loader GX forwarder WAD ([Wii](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders/USB%20Loader%20GX-UNEO_Forwarder_5_1_AHBPROT.wad), [vWii](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders/USB%20Loader%20GX-UNEO_Forwarder_5_1_AHBPROT_vWii%20%28Fix%29.wad)).
+ * Download the [UNEO Channel Booter for Priiloader](https://sourceforge.net/projects/usbloadergx/files/Releases/Forwarders%20dols/UNEO%20Channel%20Booter%20for%20Priiloader.zip/download).
+ * Install the forwarder WAD with a WAD manager like [YAWM ModMii Edition](yawmme).
+ * Extract the `UNEO Channel Booter for Priiloader.zip` file anywhere.
+ * Copy `uneoboot.dol` to the root of your SD card.
You will be installing `uneoboot.dol` in step 3.
{% endcapture %}
diff --git a/_pages/en_US/riiconnect24-dns-update.md b/_pages/en_US/riiconnect24-dns-update.md
index 47508bd07..e9995510c 100644
--- a/_pages/en_US/riiconnect24-dns-update.md
+++ b/_pages/en_US/riiconnect24-dns-update.md
@@ -17,14 +17,14 @@ RiiConnect24 functionality will be limited until you update the DNS setting on y
To update your entered DNS Address please follow these steps:
1. Go to `Wii Options`.
-2. Go to `Wii Settings`.
-3. Go to `Page 2`, then click on `Internet`.
-4. Go to `Connection Settings`
-5. Select your current connection
-6. Go to `Change Settings`
-7. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
-8. Type in `167.86.108.126` as the primary DNS
-9. Type in `1.1.1.1` as the secondary DNS
-10. Select `Confirm`, then select `Save`
-11. Select `OK` to perform a connection
-12. If the connection test was successful, select `No` to skip the Wii System Update.
+1. Go to `Wii Settings`.
+1. Go to `Page 2`, then click on `Internet`.
+1. Go to `Connection Settings`
+1. Select your current connection
+1. Go to `Change Settings`
+1. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
+1. Type in `167.86.108.126` as the primary DNS
+1. Type in `1.1.1.1` as the secondary DNS
+1. Select `Confirm`, then select `Save`
+1. Select `OK` to perform a connection
+1. If the connection test was successful, select `No` to skip the Wii System Update.
diff --git a/_pages/en_US/riiconnect24-dolphin.md b/_pages/en_US/riiconnect24-dolphin.md
index caa6f6410..cb33f8e17 100644
--- a/_pages/en_US/riiconnect24-dolphin.md
+++ b/_pages/en_US/riiconnect24-dolphin.md
@@ -37,10 +37,10 @@ If you have Dolphin already installed, skip to [Section II](#section-ii---instal
{: .notice--info}
1. Download the latest Dolphin Beta or Development version.
-2. Extract the .7z file using a program like 7-Zip or WinRAR.
-3. Start Dolphin.
-4. In Dolphin, go to `Tools` -> `Perform Online System Update` -> Choose your region.
-
+1. Extract the .7z file using a program like 7-Zip or WinRAR.
+1. Start Dolphin.
+1. In Dolphin, go to `Tools` -> `Perform Online System Update` -> Choose your region.
+ 
If you have a homebrewed Wii console, you can use a [BootMii NAND dump](bootmii) instead of installing the system files with the System Update option. See [this page](https://wiki.dolphin-emu.org/index.php?title=NAND_Usage_Guide) for more information.
{: .notice--info}
@@ -51,24 +51,24 @@ If you use a Windows version before Windows 10, you unfortunately cannot use Wii
{: .notice--danger}
1. Click the link above to go to the GitHub page where the patcher is.
-2. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
-3. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
-4. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
-5. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`"
-
-6. Choose "`Express (Recommended)`". It will give you everything you need.
-
-7. Select your region.
-
-8. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
-
-9. Press `1` then `ENTER` to start patching.
-10. Be patient...
-
-11. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.
-
-
-12. In Dolphin, go to `Tools` and then `Install WAD`. Install all the WAD files one by one.
+1. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
+1. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
+1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
+1. For this guide, choose "`Install RiiConnect24 on your Dolphin Emulator`"
+ 
+1. Choose "`Express (Recommended)`". It will give you everything you need.
+ 
+1. Select your region.
+ 
+1. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
+ 
+1. Press `1` then `ENTER` to start patching.
+1. Be patient...
+ 
+1. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.
+ 
+ 
+1. In Dolphin, go to `Tools` and then `Install WAD`. Install all the WAD files one by one.
##### Section III - Setting your Region
@@ -80,9 +80,9 @@ If you have imported your Wii's NAND backup, the default Region Select will prob
1. Download and unzip [AnyGlobe Changer v1.0](https://github.com/fishguy6564/AnyGlobe-Changer/releases/download/1.0/AnyGlobe.Changer.zip).
1. Drag the `boot.dol` file on to the Dolphin window.
1. Wait a few seconds, then press 1 to continue.
-
+ 
1. Select your region and sub-region, then select `Save`, then `Return`.
-
+ 
When you go back to the Everybody Votes Channel, the country & region names will appear blank. This is normal.
{: .notice--info}
diff --git a/_pages/en_US/riiconnect24-vwii.md b/_pages/en_US/riiconnect24-vwii.md
index 4b76148a2..3cc65767f 100644
--- a/_pages/en_US/riiconnect24-vwii.md
+++ b/_pages/en_US/riiconnect24-vwii.md
@@ -59,30 +59,30 @@ After following the vWii modding guide linked above, you should have:
##### Section I - Running the patcher
1. Click the RiiConnect24 Patcher link above to go to the GitHub page where the patcher is.
-2. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
-3. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
-4. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
-
-5. Select "`2. Wii U (vWii, Wii Mode)`".
-
-6. For this guide, choose "`Install RiiConnect24 on your Wii`"
-
-7. Choose "`Express (Recommended)`". It will give you everything you need.
-
-8. Select your region.
-
-9. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
-
-10. Connect your SD Card or USB Drive to your computer and select "`1`".
-
-11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
-
-12. Be patient...
-
-13. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.
-
-
-14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
+1. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
+1. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
+1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
+ 
+1. Select "`2. Wii U (vWii, Wii Mode)`".
+ 
+1. For this guide, choose "`Install RiiConnect24 on your Wii`"
+ 
+1. Choose "`Express (Recommended)`". It will give you everything you need.
+ 
+1. Select your region.
+ 
+1. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
+ 
+1. Connect your SD Card or USB Drive to your computer and select "`1`".
+ 
+1. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
+ 
+1. Be patient...
+ 
+1. After it's done, we would appreciate if you take a minute to send anonymous feedback to us. If you don't want to, close the patcher. All the files should already be on your SD Card.
+ 
+ 
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
##### Section II - Installing WADs
diff --git a/_pages/en_US/riiconnect24.md b/_pages/en_US/riiconnect24.md
index f1949c804..da14e02ae 100644
--- a/_pages/en_US/riiconnect24.md
+++ b/_pages/en_US/riiconnect24.md
@@ -39,30 +39,30 @@ DO NOT INSTALL RIICONNECT24 ON A WII MINI! It will not work and it will brick th
##### Section I - Using RiiConnect24 Patcher
1. Click the link above to go to the GitHub page where the patcher is.
-2. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
-3. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
-4. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
+1. Download `RiiConnect24Patcher.bat` if you are on Windows, and `RiiConnect24Patcher.sh` if you are on a Unix system
+1. On Windows run `RiiConnect24Patcher.bat`. On Unix systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash RiiConnect24Patcher.sh`.
+1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`. (NOTE: These screenshots are from the Windows version of the patcher.)
-5. Select the device you're patching for.
+1. Select the device you're patching for.
-6. For this guide, choose "`Install RiiConnect24 on your Wii`"
+1. For this guide, choose "`Install RiiConnect24 on your Wii`"
-7. Choose "`Express (Recommended)`". It will give you everything you need.
+1. Choose "`Express (Recommended)`". It will give you everything you need.
-8. Select your region.
+1. Select your region.
-9. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
+1. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
-10. Connect your SD Card or USB Drive to your computer and select "`1`".
+1. Connect your SD Card or USB Drive to your computer and select "`1`".
-11. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
+1. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
-12. Be patient...
+1. Be patient...
-13. After it's done, close the patcher. All the files should already be on your SD Card.
+1. After it's done, close the patcher. All the files should already be on your SD Card.
-14. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
+1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` to your SD Card or USB Device.
##### Section II - Installing WADs
@@ -81,7 +81,7 @@ You will now install the patched IOS and Channel WADs that are required to use R
You will now patch your `nwc24msg.cfg` file which is required in order to use Wii Mail.
1. Launch RiiConnect24 Mail Patcher.
-2. It should only take a few seconds to patch your nwc24msg.cfg. When it's done, press the HOME Button to exit.
+1. It should only take a few seconds to patch your nwc24msg.cfg. When it's done, press the HOME Button to exit.
##### Section IV - Connecting
@@ -95,21 +95,21 @@ The old DNS server `164.132.44.106` has been deprecated as of `June 1st, 2023` a
You will now set your DNS to RiiConnect24 servers. This is optional but it's recommended, because it enhances the use of RiiConnect24 and Wiimmfi by making some other features available.
1. Go to `Wii Options`.
-2. Go to `Wii Settings`.
-3. Go to `Page 2`, then click on `Internet`.
-4. Go to `Connection Settings`.
-5. Select your current connection.
-6. Go to `Change Settings`.
-7. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
-8. Type in `167.86.108.126` as the primary DNS.
-9. Type in `1.1.1.1` as the secondary DNS.
-10. Select `Confirm`, then select `Save`.
-11. Select `OK` to perform a connection test.
-12. If the connection test was successful, select `No` to skip the Wii System Update.
-13. Go to `WiiConnect24`, then `WiiConnect24` again, and make sure it is enabled.
-14. Back on the WiiConnect24 menu, go to `Standby Connection` and make sure it is enabled.
-15. At `Slot Illumination`, it is recommend you set the disc light to `Dim` or `Bright`, but this is optional.
-16. Finally, go to the `Internet` section, then `User Agreements` or `Agreement/Contact`, then `Yes`. Please read through this.
+1. Go to `Wii Settings`.
+1. Go to `Page 2`, then click on `Internet`.
+1. Go to `Connection Settings`.
+1. Select your current connection.
+1. Go to `Change Settings`.
+1. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
+1. Type in `167.86.108.126` as the primary DNS.
+1. Type in `1.1.1.1` as the secondary DNS.
+1. Select `Confirm`, then select `Save`.
+1. Select `OK` to perform a connection test.
+1. If the connection test was successful, select `No` to skip the Wii System Update.
+1. Go to `WiiConnect24`, then `WiiConnect24` again, and make sure it is enabled.
+1. Back on the WiiConnect24 menu, go to `Standby Connection` and make sure it is enabled.
+1. At `Slot Illumination`, it is recommend you set the disc light to `Dim` or `Bright`, but this is optional.
+1. Finally, go to the `Internet` section, then `User Agreements` or `Agreement/Contact`, then `Yes`. Please read through this.
If you get error 107245, then you have not installed the patched IOS. Make sure you install IOS31 and IOS80 with YAWM ModMii Edition, along with any other patched WADs.
{: .notice--warning}
diff --git a/_pages/en_US/riitag-wiiu.md b/_pages/en_US/riitag-wiiu.md
index fc0f08dc4..f3fc8e949 100644
--- a/_pages/en_US/riitag-wiiu.md
+++ b/_pages/en_US/riitag-wiiu.md
@@ -25,11 +25,11 @@ Previously, UTag allowed using other custom firmware (often abbreviated as CFW),
##### Section I - Website instructions
1. Go to the [RiiTag website](https://tag.rc24.xyz/).
-2. Click `Log In` and log in with your Discord account.
-3. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
-4. Click `Edit Your Tag` and customize it to how you like. You can add a background, overlay, flag, nickname, Wii Number, and manually enter in games to show on your tag (not needed if you're using a USB Loader).
-5. Click `Show Key` and make note of the key shown. This will be used later on in this guide.
-6. Click `Submit` to save your changes.
+1. Click `Log In` and log in with your Discord account.
+1. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
+1. Click `Edit Your Tag` and customize it to how you like. You can add a background, overlay, flag, nickname, Wii Number, and manually enter in games to show on your tag (not needed if you're using a USB Loader).
+1. Click `Show Key` and make note of the key shown. This will be used later on in this guide.
+1. Click `Submit` to save your changes.
Do not share your RiiTag key with anyone! If you do, people can abuse your tag.
{: .notice--warning}
@@ -37,7 +37,7 @@ Do not share your RiiTag key with anyone! If you do, people can abuse your tag.
##### Section II - Setting things up on the SD card
1. Extract the UTag file to `/wiiu/environments/aroma/plugins` on your SD card. If it doesn't exist, create it.
-2. In `/wiiu/` on your SD card, create a file called `utag.txt` and paste your RiiTag key from the previous step into it.
+1. In `/wiiu/` on your SD card, create a file called `utag.txt` and paste your RiiTag key from the previous step into it.
##### Section III - Running the plugin
diff --git a/_pages/en_US/riitag.md b/_pages/en_US/riitag.md
index 15e3a0b65..cf6e00770 100644
--- a/_pages/en_US/riitag.md
+++ b/_pages/en_US/riitag.md
@@ -23,10 +23,10 @@ Want to install RiiTag on your Wii U? See [this guide](riitag-wiiu) on how to co
##### Section I - Getting Started
1. [Go to the RiiTag site.](https://tag.rc24.xyz/)
-2. Click `Log In` and log in with your Discord account.
-3. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
-4. Click your profile at the top right of the screen, then `Edit RiiTag` and customize it to how you like. You can add a background, overlay, flag, nickname, and Wii Number. Click the green Save icon in the corner to save your changes.
-5. Click your profile at the top right of the screen, then `Account`. Click `Copy` under `RiiTag Private Key`. This is not needed if you're using USB Loader GX, as the key will be in a downloadable file.
+1. Click `Log In` and log in with your Discord account.
+1. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
+1. Click your profile at the top right of the screen, then `Edit RiiTag` and customize it to how you like. You can add a background, overlay, flag, nickname, and Wii Number. Click the green Save icon in the corner to save your changes.
+1. Click your profile at the top right of the screen, then `Account`. Click `Copy` under `RiiTag Private Key`. This is not needed if you're using USB Loader GX, as the key will be in a downloadable file.
Do not share your RiiTag key with anyone! If you do, people can abuse your tag.
{: .notice--warning}
@@ -38,24 +38,24 @@ The steps to connect RiiTag to your USB Loader depend on what USB Loader you use
###### USB Loader GX
1. Load USB Loader GX on your Wii.
-2. Go to `Settings` > `Features` and turn `Wiinnertag` on. Press `Yes` or `OK` to any dialogues that show up.
-3. Ensure that `Initialize Network` is turned on.
-4. Exit USB Loader GX.
-5. Insert the SD Card or USB device where your USB Loader GX data is into your computer.
-6. Click your profile at the top right of the screen, then `Account`. Click `You can also download your Wiinnertag.xml.` which will download the file needed to use RiiTag with USB Loader GX.
-7. Save the XML to `/apps/usbloader_gx` folder on your SD Card or USB device, replacing the existing `Wiinnertag.xml`.
-8. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
+1. Go to `Settings` > `Features` and turn `Wiinnertag` on. Press `Yes` or `OK` to any dialogues that show up.
+1. Ensure that `Initialize Network` is turned on.
+1. Exit USB Loader GX.
+1. Insert the SD Card or USB device where your USB Loader GX data is into your computer.
+1. Click your profile at the top right of the screen, then `Account`. Click `You can also download your Wiinnertag.xml.` which will download the file needed to use RiiTag with USB Loader GX.
+1. Save the XML to `/apps/usbloader_gx` folder on your SD Card or USB device, replacing the existing `Wiinnertag.xml`.
+1. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
###### WiiFlow
1. Take the SD Card or USB device where your WiiFlow data is into your computer.
-2. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
-3. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
-4. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
-5. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=
`, replacing `` with the key you wrote down in Section 1.
-6. Search for `gamercards_enable` and replace that line with `gamercards_enable=yes`.
-7. Save the modified `wiiflow.ini` file.
-8. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
+1. Open `/apps/wiiflow/wiiflow.ini` with a text editor.
+1. Search for `gamercards` and replace that line with `gamercards=wiinnertag`.
+1. Search for `wiinnertag_url` and replace that line with `wiinnertag_url=https://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
+1. Search for `wiinnertag_key` and replace that line with `wiinnertag_key=`, replacing `` with the key you wrote down in Section 1.
+1. Search for `gamercards_enable` and replace that line with `gamercards_enable=yes`.
+1. Save the modified `wiiflow.ini` file.
+1. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
###### Emulators
@@ -64,9 +64,9 @@ You need a Discord account for this to work.
{: .notice--info}
1. [Join the RiiConnect24 Discord server](https://discord.gg/rc24) if you aren't already in there.
-2. Make sure you turn on Discord rich presence in the emulator preferences.
-3. Make sure your Discord client is open (not the web-based client, the standalone application)
-4. Play a game and RiiTag will automatically update your tag when you play a game.
+1. Make sure you turn on Discord rich presence in the emulator preferences.
+1. Make sure your Discord client is open (not the web-based client, the standalone application)
+1. Play a game and RiiTag will automatically update your tag when you play a game.
A Discord bot is used to read your rich presence and update your RiiTag accordingly. If you want to invite the bot to your server, [use this link](https://discord.com/oauth2/authorize?client_id=596108891071447052&scope=bot).
@@ -77,9 +77,9 @@ You need a Discord account for this to work.
{: .notice--info}
1. [Join the RiiConnect24 Discord server](https://discord.gg/rc24) if you aren't already in there.
-2. Follow the instructions on [NSO-RPC](https://github.com/MCMi460/NSO-RPC) for Switch and [3DS-RPC](https://github.com/MCMi460/3DS-RPC) for 3DS.
-3. If you're using NSO-RPC, make sure your Discord client is open (not the web-based client, the standalone application)
-4. Play a game and RiiTag will automatically update your tag when you play a game.
+1. Follow the instructions on [NSO-RPC](https://github.com/MCMi460/NSO-RPC) for Switch and [3DS-RPC](https://github.com/MCMi460/3DS-RPC) for 3DS.
+1. If you're using NSO-RPC, make sure your Discord client is open (not the web-based client, the standalone application)
+1. Play a game and RiiTag will automatically update your tag when you play a game.
###### Configurable USB Loader
@@ -90,11 +90,11 @@ You can use the `CfgLoaderConfigurator.exe` program (Windows only) instead of ed
{: .notice--info}
1. Take the SD Card or USB device where your Configurable USB Loader data is into your computer.
-2. Open `/usb-loader/config.txt` with a text editor.
-3. Replace (or add the line) starting with `gamercard_url` with `gamercard_url = http://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
-4. Replace (or add the line) starting with `gamercard_key` with `gamercard_key = `, replacing `` with the key you wrote down in Section 1.
-5. Save the modified `config.txt` file.
-6. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
+1. Open `/usb-loader/config.txt` with a text editor.
+1. Replace (or add the line) starting with `gamercard_url` with `gamercard_url = http://tag.rc24.xyz/wii?game={ID6}&key={KEY}`.
+1. Replace (or add the line) starting with `gamercard_key` with `gamercard_key = `, replacing `` with the key you wrote down in Section 1.
+1. Save the modified `config.txt` file.
+1. You have now set up RiiTag. You can try loading any game now to see if it works correctly.
#### RiiTag Channel
@@ -102,13 +102,13 @@ We have a RiiTag Channel you can install on your Wii. When it is launched, it wi
{: .notice--info}
1. [Go to the RiiTag site.](https://tag.rc24.xyz/)
-2. Click `Log In` and log in with your Discord account.
-3. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
-4. Click your profile at the top right of the screen, then `Profile`. Click `RiiTag Channel` to download the WAD.
-5. Put the WAD on your SD Card or USB device.
-6. Install the WAD with your favorite WAD manager ([YAWM ModMii Edition](yawmme) is recommended).
-7. Make sure the Internet Channel is installed.
-8. The RiiTag Channel should now be available to use on your Wii Menu.
+1. Click `Log In` and log in with your Discord account.
+1. A dialog will pop up asking you if you want to authorize `RiiConnect24 Login` with Discord. Click `Authorize`.
+1. Click your profile at the top right of the screen, then `Profile`. Click `RiiTag Channel` to download the WAD.
+1. Put the WAD on your SD Card or USB device.
+1. Install the WAD with your favorite WAD manager ([YAWM ModMii Edition](yawmme) is recommended).
+1. Make sure the Internet Channel is installed.
+1. The RiiTag Channel should now be available to use on your Wii Menu.
[Check out RiiTag-RPC](https://github.com/RiiConnect24/RiiTag-RPC/releases/latest)
Now that you set up RiiTag, you can set up RiiTag-RPC to show your Discord friends what you're playing on the Wii using Discord's rich presence.
diff --git a/_pages/en_US/riivolution.md b/_pages/en_US/riivolution.md
index 4fb1ccb25..d3d961434 100644
--- a/_pages/en_US/riivolution.md
+++ b/_pages/en_US/riivolution.md
@@ -27,11 +27,11 @@ Riivolution requires a working disk drive and a clean physical copy of the disk
#### Preparing the files
1. Extract Riivolution and put it in the `apps` folder on your SD card or USB drive.
-2. Extract your mod files according to the diagram below to the SD or USB drive. Depending on the mod you downloaded, it may or may not already come properly structured for you.
-3. Insert your SD card and/or USB drive into your Wii and launch Riivolution from the Homebrew Channel.
-4. Insert the disk into the Wii.
+1. Extract your mod files according to the diagram below to the SD or USB drive. Depending on the mod you downloaded, it may or may not already come properly structured for you.
+1. Insert your SD card and/or USB drive into your Wii and launch Riivolution from the Homebrew Channel.
+1. Insert the disk into the Wii.
* Optional step: you can install the official riivolution forwarder channel to the Wii menu by selecting the install option to the right. This negates the need for having to launch the homebrew channel every time you want to launch riivolution.
-5. Enable the mod and select Launch. Depending on the mod, you may have different options for it.
+1. Enable the mod and select Launch. Depending on the mod, you may have different options for it.
Pay attention to the region your mod is meant for. NTSC is for U.S and Japan, and PAL is for Europe and Korea.
{: .notice--info}
diff --git a/_pages/en_US/rssmii-remove.md b/_pages/en_US/rssmii-remove.md
index d909ba5d2..6db19e806 100644
--- a/_pages/en_US/rssmii-remove.md
+++ b/_pages/en_US/rssmii-remove.md
@@ -14,8 +14,8 @@ If you no longer wish to use RSSMii (maybe because it gives you too much Wii Mai
#### Instructions
1. Extract RSSMii Remover and put it in the `apps` folder on your SD card.
-2. Delete the `feeds.xml` file on the root of your SD card.
-3. Launch RSSMii Remover from the Homebrew Channel. It will remove your subscriptions to the RSS feeds.
+1. Delete the `feeds.xml` file on the root of your SD card.
+1. Launch RSSMii Remover from the Homebrew Channel. It will remove your subscriptions to the RSS feeds.
In case you would like to revert your decision, you can always [reinstall RSSMii](rssmii).
{: .notice--info}
diff --git a/_pages/en_US/rssmii.md b/_pages/en_US/rssmii.md
index 50d4cdcf4..49362586b 100644
--- a/_pages/en_US/rssmii.md
+++ b/_pages/en_US/rssmii.md
@@ -17,36 +17,36 @@ Do you want to get RSS feed updates on your Wii Message Board? This tutorial wil
##### Section I - Downloading/Installing
1. Extract RSSMii and put it in the `apps` folder on your SD card.
-2. We need to create a `feeds.xml` on the root of the SD card so the app will know what feeds to subscribe you to.
+1. We need to create a `feeds.xml` on the root of the SD card so the app will know what feeds to subscribe you to.
-If you're using the Windows Operating System, you can use the [RSS Feeds Creator](https://github.com/RiiConnect24/rssmii/releases/download/v1.4.1/RSSFeedsCreator.bat) program created by KcrPL. It will automatically create a `feeds.xml` file and will copy it to your SD card!
-{: .notice--info}
+ If you're using the Windows Operating System, you can use the [RSS Feeds Creator](https://github.com/RiiConnect24/rssmii/releases/download/v1.4.1/RSSFeedsCreator.bat) program created by KcrPL. It will automatically create a `feeds.xml` file and will copy it to your SD card!
+ {: .notice--info}
-If you don't have a Windows computer, use this template and use your favorite text editor to make the `feeds.xml`.
+ **If you don't have a Windows computer, use this template and use your favorite text editor to make the `feeds.xml`.**
-```xml
-
-
-
-
-
-```
+ ```xml
+
+
+
+
+
+ ```
-Replace the "name" portion with the title you want to put for the feed. Make sure it's not very long, since there's not that much space.
-Then, replace the link portion with the link to the RSS feed. You can put as many feeds as you want. Don't delete the "CDATA" part.
+ Replace the "name" portion with the title you want to put for the feed. Make sure it's not very long, since there's not that much space.
+ Then, replace the link portion with the link to the RSS feed. You can put as many feeds as you want. Don't delete the "CDATA" part.
-```xml
-
-
-
-
-
-```
+ ```xml
+
+
+
+
+
+ ```
-Save the feed you made to the root of your SD Card.
-3. Launch RSSMii from the Homebrew Channel.
-4. Press A to confirm you want to subscribe to the feeds. Ignore the error about ES_GetTitleID, everything is fine.
-5. Once everything is done, press HOME to go back to the Homebrew Channel. You should soon get RSS feed updates on your Wii, enjoy!
+ Save the feed you made to the root of your SD Card.
+1. Launch RSSMii from the Homebrew Channel.
+1. Press A to confirm you want to subscribe to the feeds. Ignore the error about ES_GetTitleID, everything is fine.
+1. Once everything is done, press HOME to go back to the Homebrew Channel. You should soon get RSS feed updates on your Wii, enjoy!
Not getting any feed updates? Try an RSS feed that updates more frequently, like a feed with news for example. If the RSS feed doesn't update often, then you won't get many updates.
{: .notice--warning}
diff --git a/_pages/en_US/rtc.md b/_pages/en_US/rtc.md
index aad320663..df511cb8c 100644
--- a/_pages/en_US/rtc.md
+++ b/_pages/en_US/rtc.md
@@ -16,11 +16,11 @@ In this step, you will synchronize your Wii with a NTP time server. This will se
#### Instructions
1. Download and extract the sntp zip to the root of your SD card or USB drive.
-2. Insert your SD card or USB drive into your Wii.
-3. Launch the Homebrew Channel on your Wii.
-4. Launch sntp.
-5. Use the +Control Pad to select the current time.
-6. Press the HOME Button to exit.
+1. Insert your SD card or USB drive into your Wii.
+1. Launch the Homebrew Channel on your Wii.
+1. Launch sntp.
+1. Use the +Control Pad to select the current time.
+1. Press the HOME Button to exit.
[Continue to RiiConnect24](riiconnect24)
RiiConnect24 allows you to use discontinued services from WiiConnect24, which include the News, Forecast, Everybody Votes, Nintendo and Check Mii Out Channel, along with Wii Mail. This is optional to install.
diff --git a/_pages/en_US/str2hax.md b/_pages/en_US/str2hax.md
index ace275c18..fd6bc2300 100644
--- a/_pages/en_US/str2hax.md
+++ b/_pages/en_US/str2hax.md
@@ -20,42 +20,42 @@ str2hax is an exploit for the Wii that is triggered by loading the Wii's End Use
This exploit requires you to set your DNS in order to connect to a server that contains the exploit.
1. Go to `Wii Options`.
-
+ 
1. Go to `Wii Settings`.
-
+ 
1. Go to `Page 2`, then click on `Internet`.
-
+ 
1. Go to `Connection Settings`.
-
+ 
1. Select your current connection.
-
+ 
1. Go to `Change Settings`.
-
+ 
1. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
-
+ 
1. Type in `18.188.135.9` as the Primary DNS.
-
+ 
-If there are 3 fields instead of 2 (like above), go back and make sure you are on the `Auto-Obtain DNS` page.
-{: .notice--warning}
+ If there are 3 fields instead of 2 (like above), go back and make sure you are on the `Auto-Obtain DNS` page.
+ {: .notice--warning}
1. Select `Confirm`, then select `Save`.
-
+ 
1. Select `OK` to perform a connection test.
-
-
- - If the connection test was successful, select `No` to skip the Wii System Update.
- - If it fails with error code `521xx`, please verify that you have entered the DNS correctly.
- - If it is still unsuccessful, please [use another exploit](get-started).
+ 
+ 
+ - If the connection test was successful, select `No` to skip the Wii System Update.
+ - If it fails with error code `521xx`, please verify that you have entered the DNS correctly.
+ - If it is still unsuccessful, please [use another exploit](get-started).
##### Section II - Triggering the Exploit
1. Go to the `Internet` section, then `User Agreements` or `Agreement/Contact`, then `Yes`.
1. Click on `Next`. You should be greeted with the following screen:
-
+ 
1. Give the exploit 1-2 minutes to download (and don't press `I ACCEPT`/`I DO NOT ACCEPT`).
1. Once the exploit downloads, you will see a few text screens, then a mess of colors, then finally, the HackMii Installer.
-
+ 
[Continue to Homebrew Channel and BootMii Installation](hbc)
{: .notice--info}
diff --git a/_pages/en_US/syscheck.md b/_pages/en_US/syscheck.md
index 0366c2593..5b06217f1 100644
--- a/_pages/en_US/syscheck.md
+++ b/_pages/en_US/syscheck.md
@@ -15,14 +15,14 @@ A SysCheck lists all the IOS and cIOS that are on your Wii, along with some info
##### Section I - Downloading/Installing
1. Extract SysCheck ModMii Edition to your SD card or USB drive.
-2. Insert your SD card or USB drive into your Wii, and launch SysCheck ModMii Edition from the Homebrew Channel.
+1. Insert your SD card or USB drive into your Wii, and launch SysCheck ModMii Edition from the Homebrew Channel.
##### Section II - Performing a SysCheck
1. Wait for the program to get some information about your Wii.
-2. When "This IOS will be tested (Please select)" is shown on the screen, press A.
-
-3. Wait for the program to get some information about your IOS.
-4. After it finishes, press the `A` Button if you want to view the log.
-
-5. If you want to share the SysCheck, you can press the `A` Button, which will upload it to [syscheck.rc24.xyz](http://syscheck.rc24.xyz/) and give you a link. You can also share the `sysCheck.csv` saved to the root of your SD Card or USB Drive. The `IOSsysCheck.log` file (saved to the root as well) contains additional information about your IOS.
+1. When "This IOS will be tested (Please select)" is shown on the screen, press A.
+ 
+1. Wait for the program to get some information about your IOS.
+1. After it finishes, press the `A` Button if you want to view the log.
+ 
+1. If you want to share the SysCheck, you can press the `A` Button, which will upload it to [syscheck.rc24.xyz](http://syscheck.rc24.xyz/) and give you a link. You can also share the `sysCheck.csv` saved to the root of your SD Card or USB Drive. The `IOSsysCheck.log` file (saved to the root as well) contains additional information about your IOS.
diff --git a/_pages/en_US/themes-vwii.md b/_pages/en_US/themes-vwii.md
index 58f23f947..19628829f 100644
--- a/_pages/en_US/themes-vwii.md
+++ b/_pages/en_US/themes-vwii.md
@@ -65,8 +65,8 @@ This assumes your vWii is on the latest Wii Menu version.
There are a couple of ways to get the .app files for your vWii System Menu, in this guide we'll be using the vWii version of NUS Downloader.
1. Extract the .zip file for NUS Downloader vWii and open the application
-2. Click on `Database...`
-3. Go to `System` > `System Menu` and select the version corresponding to your region as shown in the table below.
+1. Click on `Database...`
+1. Go to `System` > `System Menu` and select the version corresponding to your region as shown in the table below.
| Region | vWii Menu version |
| --------- | -------------------- |
@@ -95,27 +95,27 @@ After you find the .app file, copy it to the main directory of the folder contai
##### Section III - Building the Theme
1. Launch ThemeMii Mod.
-2. Do not click `Download Base App`, ThemeMii does not have base .app files for vWii. If you download a base app, you must delete it in order to use the vWii .app file.
-3. In ThemeMii select `File` -> `Open` and navigate to the .mym theme you downloaded earlier.
-4. Click on `Create CSM` and select the .app file that you copied to the ThemeMii folder.
-5. Now navigate to the `theme` folder on your SD card and save your theme with the .csm extension.
+1. Do not click `Download Base App`, ThemeMii does not have base .app files for vWii. If you download a base app, you must delete it in order to use the vWii .app file.
+1. In ThemeMii select `File` -> `Open` and navigate to the .mym theme you downloaded earlier.
+1. Click on `Create CSM` and select the .app file that you copied to the ThemeMii folder.
+1. Now navigate to the `theme` folder on your SD card and save your theme with the .csm extension.
##### Section IV - Installing the Theme
1. Eject your SD card from your PC and put it into your Wii U.
-2. Start the Homebrew Channel and launch MyMenuifyMod.
-3. Select the .csm file you just created.
-4. When it prompts you to install the theme say `Yes`, and wait for it to finish.
-5. When it finishes installing, MyMenuifyMod will prompt you to either `Continue` or `Exit`, choose `Exit`.
+1. Start the Homebrew Channel and launch MyMenuifyMod.
+1. Select the .csm file you just created.
+1. When it prompts you to install the theme say `Yes`, and wait for it to finish.
+1. When it finishes installing, MyMenuifyMod will prompt you to either `Continue` or `Exit`, choose `Exit`.
If you did everything correctly, you should now have your custom theme installed on your Wii Menu.
##### Reverting to Original Theme
1. Launch the Homebrew Channel.
-2. Launch MyMenuify and navigate to your theme folder.
-3. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
-4. Select Install and wait until it finishes.
-5. When it's done, you can exit MyMenuify.
+1. Launch MyMenuify and navigate to your theme folder.
+1. Select the .app file you copied to the SD card at the end of section 2 as if you were installing a theme.
+1. Select Install and wait until it finishes.
+1. When it's done, you can exit MyMenuify.
diff --git a/_pages/en_US/themes.md b/_pages/en_US/themes.md
index 76f9fd83d..0f2ce3696 100644
--- a/_pages/en_US/themes.md
+++ b/_pages/en_US/themes.md
@@ -61,22 +61,22 @@ MAKE SURE YOU READ THE WARNINGS ABOVE BEFORE CONTINUING!
##### Section II - Building the Theme
1. A dialog box will pop up telling you to only install themes if you have brick protection. If you installed Priiloader and/or BootMii (see the warning at the start of this guide), press OK.
-2. Go to `Tools` > `Download Base App` > Version of your Wii Menu > Region of your Wii Menu
-3. A dialog box will pop up asking you to enter in a value to create a key. Enter in what it says, it will create a key that will be used to decrypt the Wii Menu contents from Nintendo's servers.
-4. A file selection box will ask you where to save the .app file (that is the Wii Menu content file it downloaded). Save it to the directory where ThemeMii is in.
-5. Go to `Options` > `Standard System Menu` > Version of your Wii Menu > Region of your Wii Menu
-6. Go to `File` > `Open`, then browse for where your .mym file is.
-7. Press `Create csm`, then browse for a directory you want to save the theme in. Give it a moment to build the theme.
-8. A dialog box will pop up asking you if you want to save the .mym. Press `No`.
+1. Go to `Tools` > `Download Base App` > Version of your Wii Menu > Region of your Wii Menu
+1. A dialog box will pop up asking you to enter in a value to create a key. Enter in what it says, it will create a key that will be used to decrypt the Wii Menu contents from Nintendo's servers.
+1. A file selection box will ask you where to save the .app file (that is the Wii Menu content file it downloaded). Save it to the directory where ThemeMii is in.
+1. Go to `Options` > `Standard System Menu` > Version of your Wii Menu > Region of your Wii Menu
+1. Go to `File` > `Open`, then browse for where your .mym file is.
+1. Press `Create csm`, then browse for a directory you want to save the theme in. Give it a moment to build the theme.
+1. A dialog box will pop up asking you if you want to save the .mym. Press `No`.
##### Section III - Installing the Theme
1. Extract MyMenuifyMod.zip to your SD card or USB drive.
-2. Put the .csm file you saved in a folder called `modthemes` on your SD card or USB drive.
-3. Insert your SD card or USB drive into your Wii.
-4. Launch MyMenuify Mod from the Homebrew Channel.
-5. After an introduction message, it will ask you what IOS you want to use in the app. If you have [installed cIOS](cios), use `IOS249`, or else use `IOS58`. If the former gives an `Exception DSI occurred!` error, press Reset on the Wii console, launch it again, then try `IOS250`. It might take a couple attempts to reload the IOS.
-6. Highlight the theme you want to install, then press A. Give it a moment to install the theme, then press any button to go to the Wii Menu. Hopefully, the theme installed correctly.
+1. Put the .csm file you saved in a folder called `modthemes` on your SD card or USB drive.
+1. Insert your SD card or USB drive into your Wii.
+1. Launch MyMenuify Mod from the Homebrew Channel.
+1. After an introduction message, it will ask you what IOS you want to use in the app. If you have [installed cIOS](cios), use `IOS249`, or else use `IOS58`. If the former gives an `Exception DSI occurred!` error, press Reset on the Wii console, launch it again, then try `IOS250`. It might take a couple attempts to reload the IOS.
+1. Highlight the theme you want to install, then press A. Give it a moment to install the theme, then press any button to go to the Wii Menu. Hopefully, the theme installed correctly.
If you get an error saying "The system files are corrupted" or a black screen, don't panic as long as you installed Priiloader. Turn off your Wii, then hold down the RESET button down and turn on your Wii. You should be able to boot into the Priiloader menu, where you have some options to fix your Wii Menu. One of the options is to launch the Homebrew Channel, where you can launch MyMenuify Mod and press a button to download and install the original Wii Menu theme.
{: .notice--info}
diff --git a/_pages/en_US/update.md b/_pages/en_US/update.md
index c9c765222..d9105430b 100644
--- a/_pages/en_US/update.md
+++ b/_pages/en_US/update.md
@@ -25,12 +25,12 @@ Your Wii must be modded in order to perform this. If it isn't, then it's best to
{: .notice--info}
1. Extract the .zip file for NUS Downloader Wii and open the application.
-2. Go to `Database...` > `System` > `0000000100000002 - System Menu` and select the version corresponding to your region as shown in the table below.
-3. Make sure `Pack WAD` is checked.
-4. Press `Start NUS Download!`.
-5. Open the `titles` -> `0000000100000002` -> (Wii Menu version) and copy the .wad file to a folder called `wad` on your SD Card or USB drive.
-6. Repeat steps 2-5 with `IOS` -> `000000010000003A` -> `Latest Version`.
-7. After you have copied all 3 `.wad` files, eject your SD card/USB drive from your PC and put it back into your Wii.
+1. Go to `Database...` > `System` > `0000000100000002 - System Menu` and select the version corresponding to your region as shown in the table below.
+1. Make sure `Pack WAD` is checked.
+1. Press `Start NUS Download!`.
+1. Open the `titles` -> `0000000100000002` -> (Wii Menu version) and copy the .wad file to a folder called `wad` on your SD Card or USB drive.
+1. Repeat steps 2-5 with `IOS` -> `000000010000003A` -> `Latest Version`.
+1. After you have copied all 3 `.wad` files, eject your SD card/USB drive from your PC and put it back into your Wii.
| Region | Wii Menu version |
| ------ | ---------------- |
@@ -42,11 +42,11 @@ Your Wii must be modded in order to perform this. If it isn't, then it's best to
##### Section II - Installing
1. Power off your Wii. Start holding RESET, then turn it back on.
-2. In the Priiloader menu, select `Homebrew Channel`.
+1. In the Priiloader menu, select `Homebrew Channel`.
* If the Priiloader menu does not appear, please [install it immediately](priiloader). Priiloader is required for this guide.
-3. Launch YAWM ModMii Edition.
-4. Select your SD card or USB drive.
-5. Press `+` to one the IOS80 and IOS58 WADs to highlight them, then press A twice to install.
-6. Navigate to the Wii Menu WAD and press A twice to install it.
-7. When prompted to retain Priiloader, press A to confirm.
-8. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
+1. Launch YAWM ModMii Edition.
+1. Select your SD card or USB drive.
+1. Press `+` to one the IOS80 and IOS58 WADs to highlight them, then press A twice to install.
+1. Navigate to the Wii Menu WAD and press A twice to install it.
+1. When prompted to retain Priiloader, press A to confirm.
+1. After they are successfully installed, press the HOME Button to exit back to the Homebrew Channel.
diff --git a/_pages/en_US/usbloadergx.md b/_pages/en_US/usbloadergx.md
index e52dc9771..0b4afef93 100644
--- a/_pages/en_US/usbloadergx.md
+++ b/_pages/en_US/usbloadergx.md
@@ -41,7 +41,7 @@ You may format it as NTFS, but it won't work with a majority of apps (eg. The Ho
##### Downloading
1. Extract USB Loader GX and put it in the `apps` folder on your USB drive or SD card.
-2. Insert your USB drive, and SD card if you're using one, into your Wii and launch USB Loader GX from the Homebrew Channel.
+1. Insert your USB drive, and SD card if you're using one, into your Wii and launch USB Loader GX from the Homebrew Channel.
##### Getting Started
diff --git a/_pages/en_US/wiiflow.md b/_pages/en_US/wiiflow.md
index ed55d7b59..9f77be16b 100644
--- a/_pages/en_US/wiiflow.md
+++ b/_pages/en_US/wiiflow.md
@@ -41,7 +41,7 @@ WiiFlow can load games from an SD card or a USB drive.
##### Downloading
1. Extract WiiFlow and put the `apps` and `WiiFlow` folders on your USB drive or SD card.
-2. Insert your USB drive, and SD card if you're using one, into your Wii and launch WiiFlow from the Homebrew Channel.
+1. Insert your USB drive, and SD card if you're using one, into your Wii and launch WiiFlow from the Homebrew Channel.
##### Getting Started
diff --git a/_pages/en_US/wiigsc.md b/_pages/en_US/wiigsc.md
index 406da5b1d..74febf47a 100644
--- a/_pages/en_US/wiigsc.md
+++ b/_pages/en_US/wiigsc.md
@@ -23,10 +23,10 @@ Do NOT make a shortcut for the games "Mario Party 9" or "A Boy and His Blob". It
#### Instructions
1. Install WiiGSC, then right click on it and choose **Run as administrator**. If you do not do this, WiiGSC will throw an error when you open it.
-
-2. Select the path to the ISO or WBFS file on your USB drive, and select the USB Loader you use. The other options should be fine the way they are.
-
-3. Install the generated WAD with your WAD manager.
+ 
+1. Select the path to the ISO or WBFS file on your USB drive, and select the USB Loader you use. The other options should be fine the way they are.
+ 
+1. Install the generated WAD with your WAD manager.
If you get an error saying "The system files are corrupted", don't panic as long as you installed Priiloader.
diff --git a/_pages/en_US/wiilink-demae-dominos.md b/_pages/en_US/wiilink-demae-dominos.md
index a69426482..b82ac2d1e 100644
--- a/_pages/en_US/wiilink-demae-dominos.md
+++ b/_pages/en_US/wiilink-demae-dominos.md
@@ -31,33 +31,33 @@ You cannot use the default Dolphin NAND with this service. You must use your own
##### Section I - Getting Started
1. Download the latest version of the WiiLink Patcher, available [here](https://github.com/WiiLink24/WiiLink24-Patcher/tree/csharp-ver).
-2. Make sure to download the version in the README that corresponds to your operating system.
-3. Launch the patcher and begin the setup process.
-4. When you see the setup screen, select `1. English Translation` in order to gain access to the Food Delivery Channel (Domino's) channel.
+1. Make sure to download the version in the README that corresponds to your operating system.
+1. Launch the patcher and begin the setup process.
+1. When you see the setup screen, select `1. English Translation` in order to gain access to the Food Delivery Channel (Domino's) channel.
-5. Next, you’ll see this screen, asking which version of Food Delivery Channel you want, so you’ll want to pick `2. Domino's (US and Canada only)`
+1. Next, you’ll see this screen, asking which version of Food Delivery Channel you want, so you’ll want to pick `2. Domino's (US and Canada only)`
-6. After that, you can go through the rest of the process, but once you reach this step, be sure to pick the correct console platform you’re installing this on, as it will matter when using the app.
+1. After that, you can go through the rest of the process, but once you reach this step, be sure to pick the correct console platform you’re installing this on, as it will matter when using the app.
##### Section II - Registering your Console ID
1. After completing the setup process, go to the [**WiiLink Discord server**](https://discord.gg/wiilink-750581992223146074) to register your Wii's console ID.
-2. Use the `Get Console ID` Homebrew app, that was given by the patcher, to retrieve your system's console ID.
-3. Visit the `#dominos-chat` channel on the Discord server.
-4. Type the command `/dominos ` in the chat, replacing `` with your actual console ID. Make sure the ID is in the parameter box, otherwise the command will not work and will be posted publicly on the channel.
-5. Double-check that you've typed the correct console ID, as it can't be re-registered. If you need to re-register, ask a staff member in the server for assistance.
+1. Use the `Get Console ID` Homebrew app, that was given by the patcher, to retrieve your system's console ID.
+1. Visit the `#dominos-chat` channel on the Discord server.
+1. Type the command `/dominos ` in the chat, replacing `` with your actual console ID. Make sure the ID is in the parameter box, otherwise the command will not work and will be posted publicly on the channel.
+1. Double-check that you've typed the correct console ID, as it can't be re-registered. If you need to re-register, ask a staff member in the server for assistance.
##### Section III - Installing WADs
You will now install the Food Delivery Channel and Set Personal Data channels.
1. Put your SD card or USB drive in your Wii.
-2. After registering your console ID, go to the Homebrew Channel and launch YAWM ModMii Edition.
-3. In the WAD Manager menu, locate `Food Channel (Domino's) (English).wad`.
-4. Also locate `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad`, depending on your console platform.
-5. Select both WADs by pressing `+` on each one.
-6. Press `A` to install the selected WADs.
+1. After registering your console ID, go to the Homebrew Channel and launch YAWM ModMii Edition.
+1. In the WAD Manager menu, locate `Food Channel (Domino's) (English).wad`.
+1. Also locate `WiiLink_SPD (Wii).wad` or `WiiLink_SPD (vWii).wad`, depending on your console platform.
+1. Select both WADs by pressing `+` on each one.
+1. Press `A` to install the selected WADs.
If you happen to get `Error -1022` when installing `Food Channel (Domino's) (English).wad`, uninstall the channel by selecting the WAD with `-` and pressing `A`. Then, re-install the WAD.
{: .notice--warning}
@@ -73,8 +73,8 @@ You are responsible for entering your correct address information. Failure to do
In this section you will be setting your address information. This is required for proper usage of Demae Domino's.
1. Launch the Food Delivery Channel from the Wii Menu.
-2. If you have not previously set your address information, a prompt telling you to set it will appear. Press the `Address Info` button. Otherwise, click the `Change Address Information` button in the main menu.
-3. Now you are in the Address Information menu. Press the arrows to traverse screens. Here you will enter your data. When you are finished, click the `Done` button and then `Demae`.
+1. If you have not previously set your address information, a prompt telling you to set it will appear. Press the `Address Info` button. Otherwise, click the `Change Address Information` button in the main menu.
+1. Now you are in the Address Information menu. Press the arrows to traverse screens. Here you will enter your data. When you are finished, click the `Done` button and then `Demae`.
@@ -90,16 +90,16 @@ If you have previously placed an order, skip to step 4.
{: .notice--info}
1. Launch the Food Delivery Channel (aka. Food Channel) from the Wii Menu
-2. Follow the on-screen instructions, then click `Order` in the main menu.
+1. Follow the on-screen instructions, then click `Order` in the main menu.
-3. You will now be prompted to select your region. Be sure to select your residing country correctly. Failure to do so will result in restaurants failing to load. You will then be prompted to select your state/province, then city. If your city is not on the list, you can select any one as it does not matter.
+1. You will now be prompted to select your region. Be sure to select your residing country correctly. Failure to do so will result in restaurants failing to load. You will then be prompted to select your state/province, then city. If your city is not on the list, you can select any one as it does not matter.
-4. Click the `Pizza` button. This will load all the restaurants in your area. The first restaurant in the list is the one closest to you.
-5. Click `See Menu` to list the different menu categories. Click the category you would like, then select a food item. In the item screen, you can add toppings and adjust quantity.
-6. After adding a food item, you will be brought to the basket. To add a food item, scroll to the bottom and select `Add Order`. To proceed to checkout, click `Next`.
-7. Review your order thoroughly before placing the order. When you are ready, click the big green `Order` button.
+1. Click the `Pizza` button. This will load all the restaurants in your area. The first restaurant in the list is the one closest to you.
+1. Click `See Menu` to list the different menu categories. Click the category you would like, then select a food item. In the item screen, you can add toppings and adjust quantity.
+1. After adding a food item, you will be brought to the basket. To add a food item, scroll to the bottom and select `Add Order`. To proceed to checkout, click `Next`.
+1. Review your order thoroughly before placing the order. When you are ready, click the big green `Order` button.
-8. If no error appeared, your order was placed successfully! To track your order, simply visit the Domino's Tracker for your region and enter the phone number you entered in the Address Information menu.
+1. If no error appeared, your order was placed successfully! To track your order, simply visit the Domino's Tracker for your region and enter the phone number you entered in the Address Information menu.
**_Happy ordering!_**
diff --git a/_pages/en_US/wiilink.md b/_pages/en_US/wiilink.md
index 70ec575de..d25d52ea2 100644
--- a/_pages/en_US/wiilink.md
+++ b/_pages/en_US/wiilink.md
@@ -56,10 +56,10 @@ Adding your email to the Address Information (SPD) settings menu will allow the
{: .notice--info}
1. Launch Digicam Print Channel from your Wii's home menu.
-2. On the bottom right, press `Address settings` and then `Yes`.
-3. Click on `Email Address` within the Address Information menu and type in your email address. (make sure you **put it in correctly** or it **will not work!**)
-4. Press `OK` and then `Done`.
-5. Once you are back in the Address Information menu, choose `Digicam` in the `Choose Channel` menu. After you’ve done that, it should work!
+1. On the bottom right, press `Address settings` and then `Yes`.
+1. Click on `Email Address` within the Address Information menu and type in your email address. (make sure you **put it in correctly** or it **will not work!**)
+1. Press `OK` and then `Done`.
+1. Once you are back in the Address Information menu, choose `Digicam` in the `Choose Channel` menu. After you’ve done that, it should work!
For PAL (European Wiis)
In Wii Settings please set TV Resolution to 60 HZ (480p/480i). You can find this in `Screen -> TV Resolution` If you do not, a pink bar will appear at the bottom of the screen obscuring vision.
diff --git a/_pages/en_US/wiimmfi.md b/_pages/en_US/wiimmfi.md
index 4020c1960..b48d83bee 100644
--- a/_pages/en_US/wiimmfi.md
+++ b/_pages/en_US/wiimmfi.md
@@ -30,21 +30,21 @@ If you have an older version of Priiloader or don't have it installed, follow [t
#### Instructions
1. Hold the RESET button while turning on your Wii.
- - If you are using a Wii mini, plug in a USB keyboard and hold Escape on it while turning it on.
+ - If you are using a Wii mini, plug in a USB keyboard and hold Escape on it while turning it on.
-
-
+ 
+ 
-2. You should see the Priiloader menu.
- 
-3. Go to `System Menu Hacks`.
+1. You should see the Priiloader menu.
+ 
+1. Go to `System Menu Hacks`.
-If you are using a USB drive to install Priiloader, make sure you do not have an SD card inserted at the same time.
-This will cause Priiloader to be unable to find the hacks_hash.ini file.
-{: .notice--info}
+ If you are using a USB drive to install Priiloader, make sure you do not have an SD card inserted at the same time.
+ This will cause Priiloader to be unable to find the hacks_hash.ini file.
+ {: .notice--info}
-4. Make sure the `Wiimmfi patch v4` hack is enabled.
- 
+1. Make sure the `Wiimmfi patch v4` hack is enabled.
+ 
1. Scroll down to `save settings` and press A, then press B to go back to the main menu of Priiloader.
1. Scroll to `System Menu` and press A to launch it.
1. Launch your game through the Disc channel. It should be patched with Wiimmfi.
@@ -65,9 +65,9 @@ MrBean35000vr (creator of CTGP-R, a Mario Kart Wii content pack) created a Wiimm
#### Instructions
1. Extract Auto Wiimmfi Patcher to the root of your SD card or USB drive.
-2. Insert your SD Card into your Wii, and launch Auto Wiimmfi Patcher from the Homebrew Channel.
-3. Insert your game disc (you can insert it before or after launch, it doesn't matter).
-4. Wait for patch to complete, and it'll begin!
+1. Insert your SD Card into your Wii, and launch Auto Wiimmfi Patcher from the Homebrew Channel.
+1. Insert your game disc (you can insert it before or after launch, it doesn't matter).
+1. Wait for patch to complete, and it'll begin!
### No-Homebrew (Disc)
@@ -82,12 +82,12 @@ Thanks to Fullmetal5's str2hax exploit, which Leseratte was able to adapt for th
##### Instructions
1. Insert your game disc.
-2. Go into your internet connection settings and set the DNS server of your console to 95.217.77.151.
-3. Go to the WC24 contract information (third button after clicking on "Internet" in the settings).
-4. Confirm that you do want to use WC24 and the shop channel
-5. The Wiimmfi patcher page should show up. If it doesn't, and you still see the default license agreement, your router might not be compatible with this method.
-6. Wait for about 1 minute and 30 seconds for the patcher to load
-7. The game should now start with the Wiimmfi patch included
+1. Go into your internet connection settings and set the DNS server of your console to 95.217.77.151.
+1. Go to the WC24 contract information (third button after clicking on "Internet" in the settings).
+1. Confirm that you do want to use WC24 and the shop channel
+1. The Wiimmfi patcher page should show up. If it doesn't, and you still see the default license agreement, your router might not be compatible with this method.
+1. Wait for about 1 minute and 30 seconds for the patcher to load
+1. The game should now start with the Wiimmfi patch included
#### DNS Method
@@ -96,17 +96,17 @@ There's an easy method to patch games to use Wiimmfi that can be used whether or
##### Instructions
1. Go to `Wii Options`.
-2. Go to `Wii Settings`.
-3. Go to `Page 2`, then click on `Internet`.
-4. Go to `Connection Settings`.
-5. Select your current connection.
-6. Go to `Change Settings`.
-7. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
-8. Type in `95.217.77.181` as the primary DNS.
-9. Type in `1.1.1.1` as the secondary DNS.
-10. Select `Confirm`, then select `Save`.
-11. Select `OK` to perform a connection test.
-12. If the connection test was successful, select `No` to skip the Wii System Update.
+1. Go to `Wii Settings`.
+1. Go to `Page 2`, then click on `Internet`.
+1. Go to `Connection Settings`.
+1. Select your current connection.
+1. Go to `Change Settings`.
+1. Go to `Auto-Obtain DNS` (Not IP Address), then select `No`, then `Advanced Settings`.
+1. Type in `95.217.77.181` as the primary DNS.
+1. Type in `1.1.1.1` as the secondary DNS.
+1. Select `Confirm`, then select `Save`.
+1. Select `OK` to perform a connection test.
+1. If the connection test was successful, select `No` to skip the Wii System Update.
If you get error 20100 or 20110, that means the game is too new for this method.
{: .notice--warning}
@@ -136,8 +136,8 @@ You may not want to run a patcher each time you want to play on Wiimmfi, and may
#### Instructions
1. Extract the patcher of your choice to a folder, and place your copy of the game in it.
-2. Run the patch script for your OS: usually it will end in `.bat` for Windows and `.sh` for Mac/Linux. If you're using the RiiConnect24 Patcher, select your device (Wii, vWii, or Dolphin) and choose the patcher for your game.
-3. Once it's finished, get the version out of the `wiimmfi-images` folder (it may be in the folder outside of the patcher - ../wiimmfi-images) and copy it back to your USB.
+1. Run the patch script for your OS: usually it will end in `.bat` for Windows and `.sh` for Mac/Linux. If you're using the RiiConnect24 Patcher, select your device (Wii, vWii, or Dolphin) and choose the patcher for your game.
+1. Once it's finished, get the version out of the `wiimmfi-images` folder (it may be in the folder outside of the patcher - ../wiimmfi-images) and copy it back to your USB.
### WiiWare Patching
@@ -160,8 +160,8 @@ You can patch WiiWare games in order to play them on Wiimmfi.
Steps:
1. Extract the .zip of the latest version of WiiWare Patcher, and put your WAD in it.
-2. Run the patch script for your OS: usually it will end in `.bat` for Windows and `.sh` for Mac/Linux. If you're using the RiiConnect24 Patcher, select your device (Wii, vWii, or Dolphin) and choose the WiiWare patcher.
-3. If it completed successfully, install the WAD that was made in `wiiware-wads` with YAWM ModMii Edition.
+1. Run the patch script for your OS: usually it will end in `.bat` for Windows and `.sh` for Mac/Linux. If you're using the RiiConnect24 Patcher, select your device (Wii, vWii, or Dolphin) and choose the WiiWare patcher.
+1. If it completed successfully, install the WAD that was made in `wiiware-wads` with YAWM ModMii Edition.
## Other stuff
@@ -179,11 +179,11 @@ Wiimmfi allows you to participate in Mario Kart Wii competitions again.
#### Instructions (for Wii)
1. Extract Mario Kart Wii Competition Patcher and put it in the `apps` folder on your SD Card.
-2. Insert your SD card or USB drive into the Wii.
-3. Launch the original Mario Kart Wii game (not Wiimmfi patched).
-4. Navigate to Settings -> Network Settings (or Nintendo WFC Connection) -> Message Service. If you turned the message service feature on, turn it off and turn it on again.
-5. Launch Mario Kart Wii Competition Patcher.
-6. The patcher will look for save files for Mario Kart Wii on your storage device in various places, and upload them. This is done in case a missing competition is found in your save file. It will also, of course, patch your Wii for competitions.
+1. Insert your SD card or USB drive into the Wii.
+1. Launch the original Mario Kart Wii game (not Wiimmfi patched).
+1. Navigate to Settings -> Network Settings (or Nintendo WFC Connection) -> Message Service. If you turned the message service feature on, turn it off and turn it on again.
+1. Launch Mario Kart Wii Competition Patcher.
+1. The patcher will look for save files for Mario Kart Wii on your storage device in various places, and upload them. This is done in case a missing competition is found in your save file. It will also, of course, patch your Wii for competitions.
If you're using the Wii U, you will have to run the competitions patcher whenever you want to check for a competition, because WiiConnect24 is not enabled on the Wii U.
{: .notice--info}
@@ -205,10 +205,10 @@ Some games are DSi enhanced which means you can play games online without having
#### Instructions
1. Go in the Nintendo DS Wi-Fi settings. This can be accessed inside the game you want to play online with.
-2. Set up a connection.
-3. Type in `167.86.108.126` as the primary DNS.
-4. Type in `1.1.1.1` as the secondary DNS.
-5. Save your connection settings and perform a connection test. If it's successful, then you're ready to play.
+1. Set up a connection.
+1. Type in `167.86.108.126` as the primary DNS.
+1. Type in `1.1.1.1` as the secondary DNS.
+1. Save your connection settings and perform a connection test. If it's successful, then you're ready to play.
If you get error 20110, that means your ISP (Internet Service Provider) or network is blocking the use of a DNS. You can use our [DNS-Server](https://github.com/RiiConnect24/DNS-Server/releases/latest) program to bypass this.
{: .notice--warning}
diff --git a/_pages/en_US/wiiwarepatcher.md b/_pages/en_US/wiiwarepatcher.md
index 4dbd2d4c1..8514e7b46 100644
--- a/_pages/en_US/wiiwarepatcher.md
+++ b/_pages/en_US/wiiwarepatcher.md
@@ -19,18 +19,18 @@ This tutorial is only for Windows version of WiiWare Patcher.
##### Section I - Downloading WiiWare Patcher
1. Click the link above to go to the GitHub page where the patcher is.
-2. Download `WiiWarePatcher.bat`.
+1. Download `WiiWarePatcher.bat`.
##### Section II - Patching WiiWare games
1. On Windows, run `WiiWarePatcher.bat`.
-
-2. Press any key to start the patcher.
-3. Select if you want to patch your games or if you want to download and patch `Wii Speak Channel`.
-
-4. If you're patching your own games, copy them (.WAD files) to the folder where `WiiWarePatcher.bat` is, press `1` and hit ENTER.
-5. The patching process will start. Be patient.
-
-6. It's done! Patched WAD's are in the `wiimmfi-wads` folder. Install them using YAWM ModMii Edition or other WAD Manager.
+ 
+1. Press any key to start the patcher.
+1. Select if you want to patch your games or if you want to download and patch `Wii Speak Channel`.
+ 
+1. If you're patching your own games, copy them (.WAD files) to the folder where `WiiWarePatcher.bat` is, press `1` and hit ENTER.
+1. The patching process will start. Be patient.
+ 
+1. It's done! Patched WAD's are in the `wiimmfi-wads` folder. Install them using YAWM ModMii Edition or other WAD Manager.
[Return to Wiimmfi installation page](wiimmfi)
diff --git a/_pages/en_US/wilbrand.md b/_pages/en_US/wilbrand.md
index 98d253c41..269c6b6dc 100644
--- a/_pages/en_US/wilbrand.md
+++ b/_pages/en_US/wilbrand.md
@@ -27,7 +27,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
1. On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
1. Visit [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/), input your Wii MAC, version, region, ensure `Bundle the HackMii Installer for me!` is checked, and cut either wire.
-
+ 
1. Click on "Download your .zip".
1. Extract the contents of the downloaded ZIP to the root of your SD card.
1. Take out your SD card and insert it in your Wii.
@@ -37,7 +37,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
- Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
- The mail may have appeared on the previous or next day.
- If you don't see the green letter, check if any errors appear in the SD card sections in `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader.
- 
+ 
If this didn't work for you, [try another exploit](get-started) or try [Wilbrand CLI](#wilbrand-cli).
@@ -59,21 +59,20 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
#### Instructions
-1. On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
-1. Extract the Wilbrand zip to a folder on your PC, preferably on your desktop.
-1. Insert your SD card into your PC.
-1. Open a terminal inside the folder Wilbrand was extracted to.
-1. Using your Wii's version and MAC address, run the following command:
+1. On your Wii, go to `Wii Settings`, and make note of the version at the top right. Proceed to `Internet` -> `Console Information` and also make note of your MAC address.
+1. Extract the Wilbrand zip to a folder on your PC, preferably on your desktop.
+1. Insert your SD card into your PC.
+1. Open a terminal inside the folder Wilbrand was extracted to.
+1. Using your Wii's version and MAC address, run the following command:
-- Windows: `.\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:`
+ - Windows: `.\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:`
+ - `X:` is the drive letter of your SD card.
+ 
- - `X:` is the drive letter of your SD card.
- 
-
-- Linux/MacOS: `./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir`
- - If you have not opened your terminal directly in the folder Wilbrand was extracted to, use `cd` to enter it first, eg. `cd ~/Desktop/Wilbrand`
- - `/media/mount_dir` is the folder your SD card is mounted in. This may vary depending on your Linux distro.
- 
+ - Linux/MacOS: `./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir`
+ - If you have not opened your terminal directly in the folder Wilbrand was extracted to, use `cd` to enter it first, eg. `cd ~/Desktop/Wilbrand`
+ - `/media/mount_dir` is the folder your SD card is mounted in. This may vary depending on your Linux distro.
+ 
1. Extract the HackMii Installer v1.2 to a folder on your PC.
- You may also simply open the zip file in your archive manager.
diff --git a/_pages/en_US/yawmme.md b/_pages/en_US/yawmme.md
index c30fc8e83..147099062 100644
--- a/_pages/en_US/yawmme.md
+++ b/_pages/en_US/yawmme.md
@@ -23,13 +23,13 @@ This tutorial will show you how to install WADs.
#### Section II - Installing WADs
1. Select the source device that has the WAD file(s) you would like to install.
-
+ 
1. Navigate to the folder that has the WAD files.
- If you have a folder named `wad`, it will be opened automatically.
1. Navigate to the WAD file you would like to install and press `A`.
- If you would like to install multiple WAD files at once, press `+` on each of them, then press `A`.
-
+ 
1. Press A again to install the WAD(s).
-
-
+ 
+ 