diff --git a/_data/navigation/ca_ES.yml b/_data/navigation/ca_ES.yml index da0daa865..825356896 100644 --- a/_data/navigation/ca_ES.yml +++ b/_data/navigation/ca_ES.yml @@ -29,4 +29,4 @@ footer: - title: Site Navigation - - title: Why Ads? + title: Per què anuncis? diff --git a/_data/navigation/pl_PL.yml b/_data/navigation/pl_PL.yml index 5bb44a8e9..b1690f33b 100644 --- a/_data/navigation/pl_PL.yml +++ b/_data/navigation/pl_PL.yml @@ -15,7 +15,7 @@ main: - title: Zmiana regionu konsoli - - title: Site Navigation + title: Nawigacja po witrynie bottom: - title: 'W celu uzyskania wsparcia w języku angielskim, zapytaj o pomoc na stronie #3dshacks na Rizon IRC lub 3DS Hacking na Discordzie.' diff --git a/_pages/af_ZA/9.2.0-ctrtransfer.txt b/_pages/af_ZA/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/af_ZA/9.2.0-ctrtransfer.txt +++ b/_pages/af_ZA/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/af_ZA/Decrypt9-(Browser).txt b/_pages/af_ZA/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/af_ZA/Decrypt9-(Browser).txt +++ b/_pages/af_ZA/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt b/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/af_ZA/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/af_ZA/Decrypt9-(MSET).txt b/_pages/af_ZA/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/af_ZA/Decrypt9-(MSET).txt +++ b/_pages/af_ZA/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/af_ZA/F3-(Linux).txt b/_pages/af_ZA/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/af_ZA/F3-(Linux).txt +++ b/_pages/af_ZA/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/af_ZA/F3X-(Mac).txt b/_pages/af_ZA/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/af_ZA/F3X-(Mac).txt +++ b/_pages/af_ZA/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/af_ZA/H2testw-(Windows).txt b/_pages/af_ZA/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/af_ZA/H2testw-(Windows).txt +++ b/_pages/af_ZA/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/af_ZA/Homebrew-Launcher-(Soundhax).txt b/_pages/af_ZA/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/af_ZA/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/af_ZA/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/af_ZA/Installing-arm9loaderhax.txt b/_pages/af_ZA/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/af_ZA/Installing-arm9loaderhax.txt +++ b/_pages/af_ZA/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/af_ZA/Move-EmuNAND.txt b/_pages/af_ZA/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/af_ZA/Move-EmuNAND.txt +++ b/_pages/af_ZA/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/af_ZA/Region-Changing.txt b/_pages/af_ZA/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/af_ZA/Region-Changing.txt +++ b/_pages/af_ZA/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/ar_SA/9.2.0-ctrtransfer.txt b/_pages/ar_SA/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/ar_SA/9.2.0-ctrtransfer.txt +++ b/_pages/ar_SA/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/ar_SA/Decrypt9-(Browser).txt b/_pages/ar_SA/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/ar_SA/Decrypt9-(Browser).txt +++ b/_pages/ar_SA/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt b/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ar_SA/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ar_SA/Decrypt9-(MSET).txt b/_pages/ar_SA/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/ar_SA/Decrypt9-(MSET).txt +++ b/_pages/ar_SA/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ar_SA/F3-(Linux).txt b/_pages/ar_SA/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/ar_SA/F3-(Linux).txt +++ b/_pages/ar_SA/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ar_SA/F3X-(Mac).txt b/_pages/ar_SA/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/ar_SA/F3X-(Mac).txt +++ b/_pages/ar_SA/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ar_SA/H2testw-(Windows).txt b/_pages/ar_SA/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/ar_SA/H2testw-(Windows).txt +++ b/_pages/ar_SA/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ar_SA/Homebrew-Launcher-(Soundhax).txt b/_pages/ar_SA/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/ar_SA/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ar_SA/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ar_SA/Installing-arm9loaderhax.txt b/_pages/ar_SA/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/ar_SA/Installing-arm9loaderhax.txt +++ b/_pages/ar_SA/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/ar_SA/Move-EmuNAND.txt b/_pages/ar_SA/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/ar_SA/Move-EmuNAND.txt +++ b/_pages/ar_SA/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/ar_SA/Region-Changing.txt b/_pages/ar_SA/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/ar_SA/Region-Changing.txt +++ b/_pages/ar_SA/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/ca_ES/9.2.0-ctrtransfer.txt b/_pages/ca_ES/9.2.0-ctrtransfer.txt index 234840922..808fbeeb6 100644 --- a/_pages/ca_ES/9.2.0-ctrtransfer.txt +++ b/_pages/ca_ES/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Si anteriorment no teníeu cap ticket que comencés per "00-", podeu ometre aque 8. Premeu (B) per refusar la instal·lació de tickets des d'un CDN. 9. Sortiu de l'aplicació prement el botó HOME +___ + Formatar un dispositiu després d'un ctrtransfer *sense restaurar la configuració guardada* pot causar problemes de lluminositat / de parpelleig a la pantalla. Aneu [aquí](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/ca_ES/Decrypt9-(Browser).txt b/_pages/ca_ES/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/ca_ES/Decrypt9-(Browser).txt +++ b/_pages/ca_ES/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt b/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ca_ES/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ca_ES/Decrypt9-(MSET).txt b/_pages/ca_ES/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/ca_ES/Decrypt9-(MSET).txt +++ b/_pages/ca_ES/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ca_ES/F3-(Linux).txt b/_pages/ca_ES/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/ca_ES/F3-(Linux).txt +++ b/_pages/ca_ES/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ca_ES/F3X-(Mac).txt b/_pages/ca_ES/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/ca_ES/F3X-(Mac).txt +++ b/_pages/ca_ES/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ca_ES/Get-Started.txt b/_pages/ca_ES/Get-Started.txt index 7d1d64fbf..82846f1e9 100644 --- a/_pages/ca_ES/Get-Started.txt +++ b/_pages/ca_ES/Get-Started.txt @@ -1,6 +1,6 @@ --- title: "Comencem" # -lang: ca_ES +lang: ca permalink: /ca_ES/get-started.html --- diff --git a/_pages/ca_ES/H2testw-(Windows).txt b/_pages/ca_ES/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/ca_ES/H2testw-(Windows).txt +++ b/_pages/ca_ES/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/ca_ES/Homebrew-Launcher-(Soundhax).txt b/_pages/ca_ES/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/ca_ES/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ca_ES/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ca_ES/Installing-arm9loaderhax.txt b/_pages/ca_ES/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/ca_ES/Installing-arm9loaderhax.txt +++ b/_pages/ca_ES/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/ca_ES/Move-EmuNAND.txt b/_pages/ca_ES/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/ca_ES/Move-EmuNAND.txt +++ b/_pages/ca_ES/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/ca_ES/Region-Changing.txt b/_pages/ca_ES/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/ca_ES/Region-Changing.txt +++ b/_pages/ca_ES/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/ca_ES/Why-Ads.txt b/_pages/ca_ES/Why-Ads.txt index 3cf79a830..d73283690 100644 --- a/_pages/ca_ES/Why-Ads.txt +++ b/_pages/ca_ES/Why-Ads.txt @@ -1,17 +1,17 @@ --- -title: "Why Ads?" # -lang: en -permalink: /why-ads.html +title: "Per què anuncis?" # +lang: ca +permalink: /ca_ES/why-ads.html layout: single-no-ads --- -This project is the culmination of hundreds upon hundreds of hours of constant work. +Aquest projecte és la culminació de centenars i centenars d'hores de treball constant. -I maintain this guide, for free, and ensure it is always up to date. Because of this effort, I feel that it is fair for me to attempt to gain a meager income from my work (I receive next to no donations anymore). +Mantinc aquesta guia, de franc, i m'asseguro que està sempre actualitzada. Per aquesta raó, em sembla just intentar guanyar una mica de diners pel meu esforç (Gairebé no rebo donacions últimament). -This site costs you nothing to use, and all that I display are non-intrusive ads. If you still have a problem with this, feel free to block these ads. +Aquest lloc no costa res utilitzar-lo, i els anuncis que hi apareixen no són intrusius. Si tot i així no hi esteu d'acord, no dubteu a bloquejar aquests anuncis. -If you do block ads, I would like to also remind you of the [Donations](donations) page, but once again that is optional too. +Si us decidiu a bloquejar els anuncis, m'agradaria recordar-vos que accepto [donacions](donations), però, de nou, no us sentiu obligats a fer-ho. -Thanks,
+Gràcies,
Plailect \ No newline at end of file diff --git a/_pages/cs_CZ/9.2.0-ctrtransfer.txt b/_pages/cs_CZ/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/cs_CZ/9.2.0-ctrtransfer.txt +++ b/_pages/cs_CZ/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/cs_CZ/Decrypt9-(Browser).txt b/_pages/cs_CZ/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/cs_CZ/Decrypt9-(Browser).txt +++ b/_pages/cs_CZ/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt b/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/cs_CZ/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/cs_CZ/Decrypt9-(MSET).txt b/_pages/cs_CZ/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/cs_CZ/Decrypt9-(MSET).txt +++ b/_pages/cs_CZ/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/cs_CZ/F3-(Linux).txt b/_pages/cs_CZ/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/cs_CZ/F3-(Linux).txt +++ b/_pages/cs_CZ/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/cs_CZ/F3X-(Mac).txt b/_pages/cs_CZ/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/cs_CZ/F3X-(Mac).txt +++ b/_pages/cs_CZ/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/cs_CZ/H2testw-(Windows).txt b/_pages/cs_CZ/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/cs_CZ/H2testw-(Windows).txt +++ b/_pages/cs_CZ/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/cs_CZ/Homebrew-Launcher-(Soundhax).txt b/_pages/cs_CZ/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/cs_CZ/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/cs_CZ/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/cs_CZ/Installing-arm9loaderhax.txt b/_pages/cs_CZ/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/cs_CZ/Installing-arm9loaderhax.txt +++ b/_pages/cs_CZ/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/cs_CZ/Move-EmuNAND.txt b/_pages/cs_CZ/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/cs_CZ/Move-EmuNAND.txt +++ b/_pages/cs_CZ/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/cs_CZ/Region-Changing.txt b/_pages/cs_CZ/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/cs_CZ/Region-Changing.txt +++ b/_pages/cs_CZ/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/da_DK/9.2.0-ctrtransfer.txt b/_pages/da_DK/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/da_DK/9.2.0-ctrtransfer.txt +++ b/_pages/da_DK/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/da_DK/Decrypt9-(Browser).txt b/_pages/da_DK/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/da_DK/Decrypt9-(Browser).txt +++ b/_pages/da_DK/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt b/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/da_DK/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/da_DK/Decrypt9-(MSET).txt b/_pages/da_DK/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/da_DK/Decrypt9-(MSET).txt +++ b/_pages/da_DK/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/da_DK/F3-(Linux).txt b/_pages/da_DK/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/da_DK/F3-(Linux).txt +++ b/_pages/da_DK/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/da_DK/F3X-(Mac).txt b/_pages/da_DK/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/da_DK/F3X-(Mac).txt +++ b/_pages/da_DK/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/da_DK/H2testw-(Windows).txt b/_pages/da_DK/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/da_DK/H2testw-(Windows).txt +++ b/_pages/da_DK/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/da_DK/Homebrew-Launcher-(Soundhax).txt b/_pages/da_DK/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/da_DK/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/da_DK/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/da_DK/Installing-arm9loaderhax.txt b/_pages/da_DK/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/da_DK/Installing-arm9loaderhax.txt +++ b/_pages/da_DK/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/da_DK/Move-EmuNAND.txt b/_pages/da_DK/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/da_DK/Move-EmuNAND.txt +++ b/_pages/da_DK/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/da_DK/Region-Changing.txt b/_pages/da_DK/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/da_DK/Region-Changing.txt +++ b/_pages/da_DK/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/de_DE/9.2.0-ctrtransfer.txt b/_pages/de_DE/9.2.0-ctrtransfer.txt index 84b60b6f5..d072ac9ed 100644 --- a/_pages/de_DE/9.2.0-ctrtransfer.txt +++ b/_pages/de_DE/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Wenn du vorher keine Tickets hattest, die mit 00- begannen, kannst du diesen Abs 8. Drücke (B), um das Installieren von Tickets über CDN abzulehnen. 9. Drücke Home, um FBI zu verlassen +___ + Der Bildschirm kann Probleme mit der Helligkeit haben und flackern, wenn du deine Konsole nach einem ctrtransfer *ohne das Wiederherstellen der Konfigurations-Speicherdatei* formatiert hast. Siehe [hier](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/de_DE/Decrypt9-(Browser).txt b/_pages/de_DE/Decrypt9-(Browser).txt index 5445a29e1..16ef0c0ab 100644 --- a/_pages/de_DE/Decrypt9-(Browser).txt +++ b/_pages/de_DE/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Falls du bereits deinen 3DS zuvor gehackt hast und eine EmuNAND basierte CFW ins + [Folge dieser Problembehebungs-Anleitung](troubleshooting#ts_browser), falls du einen Fehler erhältst 5. Wenn der Exploit erfolgreich war, wirst du in Decrypt9 gebootet haben +___ + Weiter zu [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt b/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt index 4c0c46dd3..a31f0f1e1 100644 --- a/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/de_DE/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /de_DE/decrypt9-(homebrew-launcher).html + Wenn sich deine Konsole aufhängt, schalte sie durch langes Halten des Power-Knopfes aus und versuche es erneut 10. Wenn der Exploit erfolgreich war, hast du jetzt Decrypt9 gestartet +___ + Weiter zu [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/Decrypt9-(MSET).txt b/_pages/de_DE/Decrypt9-(MSET).txt index 8268352b2..62643a3f4 100644 --- a/_pages/de_DE/Decrypt9-(MSET).txt +++ b/_pages/de_DE/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Solltest du deinen 3DS bereits einmal gehackt haben und du ein auf EmuNAND basie 8. Starte das System neu, gehe dann in die Systemeinstellungen, dann auf "Allgemeine Einstellungen", dann auf "Nutzerprofil" und dann auf "Nintendo DS-Nutzereinstellungen" 9. Wenn der Exploit erfolgreich war, wirst du jetzt in Decrypt9 starten +___ + Weiter zu [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/F3-(Linux).txt b/_pages/de_DE/F3-(Linux).txt index 65e4d4624..d918cb72f 100644 --- a/_pages/de_DE/F3-(Linux).txt +++ b/_pages/de_DE/F3-(Linux).txt @@ -51,6 +51,7 @@ Diese Seite ist nur für Linux-Nutzer gedacht. Falls du kein Linux-Nutzer bist, Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Lautet das Ergebnis `Data LOST: 0.00 Byte (0 sectors)` funktioniert deine SD-Karte einwandfrei und du kannst alle `.h2w`-Dateien auf der SD-Karte löschen {: .notice--success} diff --git a/_pages/de_DE/F3X-(Mac).txt b/_pages/de_DE/F3X-(Mac).txt index bb2f5ee06..cd27ae17c 100644 --- a/_pages/de_DE/F3X-(Mac).txt +++ b/_pages/de_DE/F3X-(Mac).txt @@ -26,6 +26,8 @@ Die neueste Version von [F3X](https://github.com/insidegui/F3X/releases/latest) 5. Klicke auf "Start Test" 6. Warte, bis der Prozess abgeschlossen ist. +___ + Wenn der Test das Ergebnis `Success! Your card is ok!` anzeigt, ist deine SD-Karte in Ordnung und du kannst alle `.h2w`-Dateien von der Karte löschen {: .notice--success} diff --git a/_pages/de_DE/H2testw-(Windows).txt b/_pages/de_DE/H2testw-(Windows).txt index 5f874ff26..88b5ae1af 100644 --- a/_pages/de_DE/H2testw-(Windows).txt +++ b/_pages/de_DE/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Diese Seite ist nur für Windowsnutzer gedacht. Falls du Windows nicht benutzt, 8. Klicke "Schreiben + Prüfen" 9. Warte bis der Prozess beendet ist +___ + Falls der Test das Ergebnis `Test ohne Fehler beendet` anzeigt, dann ist deine SD-Karte in Ordnung und du kannst alle `.h2w` Dateien von deiner SD Karte löschen {: .notice--success} diff --git a/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt b/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt index 25410abff..e6a201e93 100644 --- a/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/de_DE/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax ist kompatibel mit den Versionen 9.0.0 bis 11.2.0 in den Regionen EUR, + Wenn sich deine Konsole aufhängt, schalte sie durch langes halten des Power-Knopfes aus, und versuche es erneut 8. Deine Konsole sollte den Homebrew Launcher laden +___ + Fortfahren mit [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/de_DE/Installing-arm9loaderhax.txt b/_pages/de_DE/Installing-arm9loaderhax.txt index 30a9c5447..70f9ee89c 100644 --- a/_pages/de_DE/Installing-arm9loaderhax.txt +++ b/_pages/de_DE/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Die neueste Version von [Luma3DS](https://github.com/AuroraWright/Luma3DS/releas + **"New 3DS CPU" zu "Clock+L2(x)"** + Dies wird die Bildrate von vielen Spielen erhöhen, könnte aber Instabilitäten in anderen Spielen verursachen + Wenn manche Spiele nicht richtig funktionieren, deaktiviere diese Option und versuche es erneut + + Dies macht den Homebrew Launcher auf 11.3 unnutzbar! 4. Drücke (Start) zum Speichern und neustarten + Wenn du einen schwarzen Bildschirm hast, gehe einfach zum nächsten Schritt + Wenn der Fehler "Failed to mount CTRNAND" auftritt, gehe einfach zum nächsten Schritt @@ -151,31 +152,33 @@ Falls du vor dem Befolgen dieser Anleitung bereits ein EmuNAND eingerichtet hatt 1. Öffne die Gesundheits- und Sicherheitsinformationen-Applikation (welche jetzt FBI ist) 2. Wähle "SD" 3. Wähle "cias" -4. Wähle `FBI.cia` und drücke (A) zum Installieren -5. Wähle `hblauncher_loader.cia` und drücke (A) zum Installieren - + Bitte beachte, dass der Homebrew Launcher auf 11.3.0 aktuell nicht läuft - + Dies sollte hoffentlich bald behoben sein -6. Wähle `lumaupdater.cia` und drücke (A) zum Installieren -7. Drücke (B), um zum SD-Karten-Hauptverzeichnis zurückzukehren -8. Navigiere zu `arm9loaderhax.bin`, drücke (A) und wähle "Copy" -9. Drücke (B) um zum FBI-Hauptmenü zurückzukehren -10. Wähle "CTR NAND" -11. Wähle "\" -12. Wähle "Paste" und drücke den (A)-Knopf zum Bestätigen -13. Beende FBI mit der Home-Taste -14. Starte deine Konsole während du die (Start) Taste gedrückt hälst neu -15. Navigiere zu "SysNAND Backup/Restore" und wähle dann "Health&Safety Inject" -16. Wähle `hs.app` (die Version, die du in Abschnitt V, Schritt 2 erstellt hast und die nicht FBI enthält) aus, drücke (A) und bestätige die Injektion -17. Drücke im Hauptmenü (Select) um deine SD-Karte auszuwerfen -18. Drücke (Start) um das Gerät, ohne die SD-Karte, neuzustarten +4. Wähle "\" +5. Wähle die "Installiere alle CIAs" Option aus und drücke (A) zum bestätigen +6. Drücke (B), um zum SD-Karten-Hauptverzeichnis zurückzukehren +7. Navigiere zu `arm9loaderhax.bin`, drücke (A) und wähle "Copy" +8. Drücke (B) um zum FBI-Hauptmenü zurückzukehren +9. Wähle "CTR NAND" +10. Wähle "\" +11. Wähle "Paste" und drücke den (A)-Knopf zum Bestätigen +12. Beende FBI mit der Home-Taste +13. Starte den Homebrew Launcher vom Home Menü aus +14. Wähle "DSP Dump" aus +15. Drücke (Start) wenn du zum Verlassen aufgeforderst wirst +16. Drücke (Start) um das Menü zu öffnen, welches dir erlaubt, den Homebrew Launcher zu verlassen +17. Drücke (A) während du (Start) beim neustarten gedrückt hälst um Hourglass9 zu starten +18. Navigiere zu "SysNAND Backup/Restore" und wähle dann "Health&Safety Inject" +19. Wähle `hs.app` (die Version, die du in Abschnitt V, Schritt 2 erstellt hast und die nicht FBI enthält) aus, drücke (A) und bestätige die Injektion +20. Drücke im Hauptmenü (Select) um deine SD-Karte auszuwerfen +21. Drücke (Start) um das Gerät, ohne die SD-Karte, neuzustarten + Dadurch, dass du deine Konsole mindestens einmal ohne SD-Karte neustartest, wirst du in der Lage sein, die CTRNAND basierte Luma3DS-Installation einzurichten 19. Benutze den (A)-Knopf und das (Steuerkreuz), um die folgenden Punkte zu aktivieren: + **"Show NAND or user string in System Settings"** -20. Falls du einen **New 3DS** nutzt, kannst du auch folgendes aktivieren: +23. Falls du einen **New 3DS** nutzt, kannst du auch folgendes aktivieren: + **"New 3DS CPU" zu "Clock+L2(x)"** + Dies wird die Bildrate von vielen Spielen erhöhen, könnte aber Instabilitäten in anderen Spielen verursachen + Wenn manche Spiele nicht richtig funktionieren, deaktiviere diese Option und versuche es erneut -21. Lege deine SD-Karte in deinen 3DS ein, drücke (Start) um zu speichern und starte das Gerät neu! + + Dies macht den Homebrew Launcher auf 11.3 unnutzbar! +24. Lege deine SD-Karte in deinen 3DS ein, drücke (Start) um zu speichern und starte das Gerät neu! ___ diff --git a/_pages/de_DE/Move-EmuNAND.txt b/_pages/de_DE/Move-EmuNAND.txt index e64d27ad6..d2074c8c9 100644 --- a/_pages/de_DE/Move-EmuNAND.txt +++ b/_pages/de_DE/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Du wirst deine GBA VC und DSiWare Spielstände VERLIEREN! 23. Drücke (Start), um die Konsole neu zu starten! 24. Falls du einen einen schwarzen Bildschirm bekommen solltest, [folge dieser Anleitung zur Problembehandlung](troubleshooting#ts_sys_down) +___ + Zu [arm9loaderhax installieren](installing-arm9loaderhax) zurückkehren. \ No newline at end of file diff --git a/_pages/de_DE/Region-Changing.txt b/_pages/de_DE/Region-Changing.txt index 18b5842bb..a6f26ef82 100644 --- a/_pages/de_DE/Region-Changing.txt +++ b/_pages/de_DE/Region-Changing.txt @@ -122,6 +122,8 @@ Regionswechsel, welche die ctrtransfer-Methode (welche in dieser Anleitung genut 1. Drücke (Start) und halte dann (X) gedrückt, um in den arm9loaderhax Decrypt9 zu starten 2. Gehe zu "SysNAND Options", dann "System Save Inject", dann wähle "Inject configsave.bin" +___ + Old 3DS / 2DS müssen möglicherweise formatiert werden (mit TinyFormat oder in den Systemeinstellungen) um Spiele, welche den erweiteten Speichermodus benötigen (z. B Monster Hunter, Super Smash Bros, oder Pokemon Sonne/Mond) spielen zu können. {: .notice--info} diff --git a/_pages/el_GR/2.1.0-ctrtransfer.txt b/_pages/el_GR/2.1.0-ctrtransfer.txt index 6acdc6018..87d50b6d7 100644 --- a/_pages/el_GR/2.1.0-ctrtransfer.txt +++ b/_pages/el_GR/2.1.0-ctrtransfer.txt @@ -7,104 +7,104 @@ permalink: /el_GR/2.1.0-ctrtransfer.html Εάν υποβαθμίσατε ένα 2DS ή New 3DS σε 2.1.0 και αφήσατε τις Ασύρματες Επικοινωνίες απενεργοποιημένες, μπορείτε να τις επανενεργοποιήσετε αφαιρώντας την μπαταρία και αποσυνδέοντας τον φορτιστή για μερικά δευτερόλεπτα και έπειτα επανενεργοποιώντας τη συσκευή σας. {: .notice--info} -If you've been using the New 3DS's microSD Management to transfer files to your SD card, this will no longer work on 2.1.0. Ensure you have a microSD card reader available before proceeding. +Εάν χρησιμοποιούσατε το microSD Μanagement του New 3ds για τη μεταφορά αρχείων στην κάρτα SD σας, αυτό δεν θα λειτουργεί πλέον στην έκδοση 2.1.0. Βεβαιωθείτε ότι έχετε μια μονάδα ανάγνωσης κάρτας microSD διαθέσιμη πριν συνεχίσετε. {: .notice--info} -Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. +Η συσκευή σας μπορεί να μην δείχνει τα εγκατεστημένα παιχνίδια σας μετά την πραγματοποίηση της ctrtransfer. Αυτό συμβαίνει λόγο του ότι τα tickets αφαιρούνται κατά τη διάρκεια της ctrtransfer, και για αυτό δημιουργούμε αντίγραφα ασφαλείας. Θα επαναφερθούν στο τέλος του οδηγού. {: .notice--info} -**For now, connecting your device to the internet is REQUIRED to continue after the 2.1.0 ctrtransfer.** +**Προς το παρών, η σύνδεση της συσκευής σας στο διαδίκτυο είναι ΑΠΑΡΑΙΤΗΤΗ για τη συνέχιση μετά την ctrtransfer 2.1.0.** {: .notice--warning} -**Disable the parental controls of your device before doing the 2.1.0 ctrtransfer. If you do not know the password, see [this](https://mkey.salthax.org/) site.** +**Απενεργοποιήστε το γονικό έλεγχο στη συσκευή σας πριν πραγματοποιήσετε τη ctrtransfer 2.1.0. Εάν δεν γνωρίζετε τον κωδικό, επισκεφθείτε [this](https://mkey.salthax.org/) την ιστοσελίδα.** {: .notice--warning} -**Performing a ctrtransfer will remove all user-installed tickets from the device until a backup is restored. Under NO CIRCUMSTANCES should you skip creating a backup!** +**Η πραγματοποίηση του ctrtransfer θα αφαιρέσει όλα τα tickets, τα οποία εγκαταστάθηκαν από το χρήστη, από τη συσκευή ωσότου γίνει επαναφορά των αντιγράφων ασφαλείας. Υπό ΚΑΜΙΑ ΣΥΝΘΗΚΗ δεν πρέπει να παραλείψετε τη δημιουργία αντιγράφων ασφαλείας!** {: .notice--danger} -**Never format a 2DS while on a version <6.0.0 or you will be unable to complete initial setup and will BRICK!** +**Ποτέ μην πραγματοποιήσετε μορφοποίηση σε ένα 2DS σε έκδοση <6.0.0, αλλιώς δεν θα μπορέσετε να πραγματοποιήσετε την αρχική παραμετροποίηση, το οποίο θα οδηγήσει σε ΑΧΡΗΣΤΕΥΣΗ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ!** {: .notice--danger} -**Never update a New 3DS running 2.1.0 (an Old 3DS firmware) or you will BRICK! You MUST restore a NAND backup or ctrtransfer back to standard New 3DS firmware first!** +**Ποτέ μην ενημερώσετε ένα New 3DS το οποίο τρέχει την έκδοση 2.1.0 (μια έκδοση του Old 3DS) αλλιώς θα οδηγηθείτε σε ΑΧΡΗΣΤΕΥΣΗ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ! ΠΡΕΠΕΙ πρώτα να κάνετε επαναφορά των αντιγράφων ασφαλείας της NAND ή να πραγματοποιήσετε ctrtransfer πίσω στην κανονική έκδοση λογισμικού του New 3DS!** {: .notice--danger} {% capture notice %} -**Putting a New 3DS on 2.1.0 in sleep mode is known to cause an UNRECOVERABLE brick!** -**This only happens when shutting the lid _while the device is on_; this does not apply to turning the device off.** -**The device only enters sleep mode when the lid is closed. It is not on a timer or anything like that.** -**Once on 2.1.0, you should continue without delay to avoid any possibility of this happening!** +**Η τοποθέτηση του New 3DS, ενώ βρίσκεται στην έκδοση 2.1.0, σε Sleep Mode μπορεί να προκαλέσει ΟΛΟΣΧΕΡΗ ΑΧΡΗΣΤΕΥΣΗ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ!** +**Αυτό συμβαίνει εάν κλείσετε το καπάκι _ενώ η συσκευή είναι ενεργοποιημένη_· δεν ισχύει σε περίπτωση που η συσκευή είναι απενεργοποιημένη.** +**Η συσκευή εισέρχεται σε Sleep Mode μόνο όταν το καπάκι είναι κλειστό. Δεν έχει καμία σχέση με χρονόμετρο ή κάτι παρόμοιο.** +**Μόλις βρεθείτε στην έκδοση 2.1.0, συστήνεται να συνεχίσετε χωρίς καθυστέρηση για την αποφυγή ενός τέτοιου γεγονότος!** {% endcapture %}
{{ notice | markdownify }}
-#### Overview of steps +#### Επισκόπηση των βημάτων -In this section, we will be flashing your console's [CTRNAND](https://www.3dbrew.org/wiki/Flash_Filesystem#CTR_partition) partition to 2.1.0 in order to take advantage of an oversight in 2.1.0 for the purpose of extracting the [OTP](https://www.3dbrew.org/wiki/OTP_Registers) unique to your console. This OTP file is required to install arm9loaderhax, and **cannot** be shared with other consoles. +Σε αυτήν την ενότητα, θα μεταφέρουμε τη [CTRNAND](https://www.3dbrew.org/wiki/Flash_Filesystem#CTR_partition) της κονσόλας σας σε 2.1.0, έτσι ώστε να εκμεταλλευτούμε μια απροσεξία της έκδοσης 2.1.0 με σκοπό να εξάγουμε το [OTP](otp-info), το οποίο είναι ξεχωριστό για την κονσόλα σας. Αυτό το αρχείο OTP είναι απαραίτητο για την εγκατάσταση του arm9loaderhax, και **δεν είναι δυνατόν** να μοιραστεί με άλλες κονσόλες. -This is accomplished by [installing a premade ctrtransfer image](https://www.reddit.com/r/3dshacks/comments/4zhe4a/) containing 2.1.0, copying your console specific files (such as `moveable.sed` and `SecureInfo_A`) to it, then fixing the title databases. +Αυτό επιτυγχάνεται [εγκαθιστώντας μια προ-δημιουργημένη ctrtransfer εικόνα](https://www.reddit.com/r/3dshacks/comments/4zhe4a/) η οποία περιέχει την έκδοση 2.1.0, αντιγράφοντας τα αρχεία τα οποία είναι ειδικά για την συσκευή σας (όπως το`moveable.sed` και το `SecureInfo_A`) σε αυτό, και έπειτα διορθώνοντας τις βάσεις δεδομένων του τίτλου. -#### What you need +#### Τι χρειάζεστε -* You will need to have booted into Decrypt9 -* The 2.1.0 ctrtransfer image for your device and region -*(if your device is not from one of these regions, just pick one)*: - + - [New 3DS or Old 3DS or 2DS 2.1.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:89acc9c1b488b8b38251de0ddf07975d6bd354a1&dn=2.1.0-4E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS or Old 3DS or 2DS 2.1.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:3dbb9c9c85a33c6242f424dcbaebcacdd8a5912b&dn=2.1.0-4J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS or Old 3DS or 2DS 2.1.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1609ce9ee7b0ed9b6dea0b3e7cca4fc52dad6ff4&dn=2.1.0-4U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* Θα πρέπει να έχετε κάνει εκκίνηση στο Decrypt9 +* Το αρχείο ctrtransfer 2.1.0 για την συσκευή και την περιοχή σας +*(εάν η συσκευή σας δεν ανήκει σε κάποια από τις παρακάτω περιοχές, απλά επιλέξτε ένα)*: + + - [New 3DS or Old 3DS or 2DS 2.1.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:89acc9c1b488b8b38251de0ddf07975d6bd354a1&dn=2.1.0-4E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS or Old 3DS or 2DS 2.1.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:3dbb9c9c85a33c6242f424dcbaebcacdd8a5912b&dn=2.1.0-4J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS or Old 3DS or 2DS 2.1.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1609ce9ee7b0ed9b6dea0b3e7cca4fc52dad6ff4&dn=2.1.0-4U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -#### Instructions +#### Οδηγίες -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία -You should be in Decrypt9 for these steps. +Θα πρέπει να βρίσκεστε στο Decrypt9 για τα παρακάτω βήματα. -1. Press (Select) on the main menu to eject your SD card, then put it in your computer -2. Copy the 2.1.0 `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card -3. Reinsert your SD card into your 3DS -4. Press (B) to get to the Decrypt9 main menu +1. Πατήστε (Select) στο αρχικό μενού για να αφαιρέσετε την κάρτα SD, και έπειτα τοποθετήστε την στον υπολογιστή σας +2. Αντιγράψτε τα αρχεία `.bin` και `.bin.sha` της έκδοσης 2.1.0 από το ctrtransfer `.zip` στον φάκελο `/files9/` στην κάρτα SD +3. Επανατοποθετήστε την κάρτα SD στο 3DS +4. Πατήστε (Β) για να επιστρέψετε στο αρχικό μενού του Decrypt9 -##### Section II - ctrtransfer +##### Ενότητα II - ctrtransfer -**Having a backup of _your_ device's NAND is REQUIRED. You will be prompted to create one as part of the steps if you do not already have one.** +**Η κατοχή αντιγράφων ασφαλείας της NAND της συσκευής _σας_ είναι ΑΠΑΡΑΙΤΗΤΗ. Θα σας ζητηθεί να δημιουργήσετε σε ένα από τα παρακάτω βήματα, εάν δεν έχετε ήδη.** {: .notice--danger} -**If you do not know whether or not you already have a NAND backup, create one when prompted by pressing (A) just to be sure.** +**Εάν δεν γνωρίζετε εάν έχετε ήδη αντίγραφα ασφαλείας της NAND, δημιουργήστε όταν σας ζητηθεί πατώντας (A), για να είστε απόλυτα σίγουροι.** {: .notice--danger} -**If you do not have enough space to create the backup, you can either backup to a different SD card or clear space on your current SD card by pressing (Select) on the Decrypt9WIP main menu to eject your SD card and allow it to be swapped with a different SD card or to clear space on your current SD card** +**Εάν δεν υπάρχει επαρκής χώρος για την δημιουργία αντιγράφων ασφαλείας, μπορείτε είτε να τα δημιουργήσετε σε μια διαφορετική κάρτα SD, είτε να αδειάσετε χώρο στην υπάρχουσα κάρτα SD, πατώντας (Select) στο κύριο μενού του Decrypt9WIP έτσι ώστε να αφαιρέσετε την κάρτα SD και να επιτρέψετε την αλλαγή της με μία διαφορετική ή να αδειάσετε χώρο στην υπάρχουσα κάρτα SD** {: .notice--danger} -1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer" -2. Input the key combo given, then select the 2.1.0 ctrtransfer image when prompted by pressing (A) -3. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)** - + **Having a backup of _your_ device's NAND is REQUIRED.** - + **Skipping this backup will result in the LOSS of all installed games and saves!** -4. Allow the transfer process to proceed automatically, this will take some time -5. Once the transfer is complete, press (B) to go back -6. Press (Select) to eject your SD card -7. Delete the 2.1.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card -8. Press (Start) to reboot without reinserting your SD card - + While on 2.1.0, the device will black screen on boot if your SD card is inserted before the home menu loads - + Every time the device is rebooted on 2.1.0, you will need to take out your SD card before boot and put it back in after the home menu loads - + For now, leave the SD card out as you will be copying files to it in the next page - + This will be fixed once you restore your device in the next page +1. Μεταβείτε στην επιλογή "SysNAND Options", έπειτα "CTRNAND Transfer" και μετά "Auto CTRNAND Transfer" +2. Εισάγετε το βασικό συνδυασμό που σας ζητείται, στη συνέχεια, επιλέξτε την 2.1.0 ctrtransfer εικόνα όταν σας ζητηθεί, πατώντας το (A) +3. Εάν δεν έχετε ήδη αντίγραφα ασφαλείας της NAND **δημιουργήστε αντίγραφα ασφαλείας της SysNAND στο `NANDmin.bin` όταν σας ζητηθεί πατώντας (A)** + + **Η κατοχή αντιγράφων ασφαλείας της NAND της συσκευής _σας_ είναι ΑΠΑΡΑΙΤΗΤΗ.** + **Η παράλειψη της δημιουργίας αντιγράφων επαναφοράς θα οδηγήσει στην απώλεια των εγκατεστημένων παιχνιδιών και των saves σας!** +4. Επιτρέψτε στην διαδικασία της μεταφοράς να συνεχιστεί αυτόματα, η οποία μπορεί να διαρκέσει αρκετά λεπτά +5. Μόλις η μεταφορά ολοκληρωθεί, πατήστε (B) για να επιστρέψετε +6. Πατήστε (Select) για να αφαιρέσετε την κάρτα SD +7. Διαγράψτε την εικόνα του ctrtransfer 2.1.0 `.bin` και`.bin.sha` από τον φάκελο `/files9/` της κάρτας SD +8. Πατήστε (Start) για να επανεκκινήσετε χωρίς να ξανατοποθετήσετε την κάρτα SD + + Ενώ βρίσκεστε στην έκδοση 2.1.0, η συσκευή σας θα προβάλει μία μαύρη οθόνη κατά την εκκίνηση εάν η κάρτα SD τοποθετηθεί πριν την φόρτωση του Home Menu + + Κάθε φορά που γίνεται επανεκκίνηση της συσκευής στην έκδοση 2.1.0, θα είναι απαραίτητη η αφαίρεση της κάρτας SD και η επανατοποθέτησή της μετά τη φόρτωση του Home Menu + + Προς το παρόν, αφήστε την κάρτα SD εκτός, καθώς θα αντιγράψουμε αρχεία σε αυτήν στην επόμενη σελίδα + + Το παραπάνω πρόβλημα θα διορθωθεί με την επαναφορά της συσκευής σας στην επόμενη σελίδα ___ -The initial boot of 2.1.0 can take slightly longer than a standard boot on some devices. +Η αρχική εκκίνηση της έκδοσης 2.1.0 μπορεί να διαρκέσει λίγο περισσότερο σε ορισμένες συσκευές. {: .notice--info} -*(Screen distortions or discolorations are normal for some devices while on 2.1.0, they will go away once you restore your backup)* +*(Παραμορφώσεις της οθόνης και παραποιήσεις χρωμάτων είναι φυσιολογικές σε ορισμένες συσκευές ενώ βρίσκονται στην έκδοση 2.1.0 και θα φύγουν μόλις επαναφέρετε τα αντίγραφα ασφαλείας σας)* {: .notice--info} {% capture notice %} -**Putting a New 3DS on 2.1.0 in sleep mode is known to cause an UNRECOVERABLE brick!** -**This only happens when shutting the lid _while the device is on_; this does not apply to turning the device off.** -**The device only enters sleep mode when the lid is closed. It is not on a timer or anything like that.** -**You should continue without delay to avoid any possibility of this happening!** +**Η τοποθέτηση του New 3DS, ενώ βρίσκεται στην έκδοση 2.1.0, σε Sleep Mode μπορεί να προκαλέσει ΟΛΟΣΧΕΡΗ ΑΧΡΗΣΤΕΥΣΗ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ!** +**Αυτό συμβαίνει εάν κλείσετε το καπάκι _ενώ η συσκευή είναι ενεργοποιημένη_· δεν ισχύει σε περίπτωση που η συσκευή είναι απενεργοποιημένη.** +**Η συσκευή εισέρχεται σε Sleep Mode μόνο όταν το καπάκι είναι κλειστό. Δεν έχει καμία σχέση με χρονόμετρο ή κάτι παρόμοιο.** +**Συστήνεται να συνεχίσετε χωρίς περαιτέρω καθυστερήσεις για την αποφυγή ενός τέτοιου γεγονότος!** {% endcapture %}
{{ notice | markdownify }}
-Continue to [Installing arm9loaderhax](installing-arm9loaderhax) +Συνέχεια στο [Εγκατάσταση του arm9loaderhax](installing-arm9loaderhax) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/9.2.0-ctrtransfer.txt b/_pages/el_GR/9.2.0-ctrtransfer.txt index a93866194..c65a8e60b 100644 --- a/_pages/el_GR/9.2.0-ctrtransfer.txt +++ b/_pages/el_GR/9.2.0-ctrtransfer.txt @@ -1,100 +1,102 @@ --- title: "9.2.0 ctrtransfer" # -lang: en -permalink: /9.2.0-ctrtransfer.html +lang: el +permalink: /el_GR/9.2.0-ctrtransfer.html --- -If you downgraded to 2.1.0 but for some reason have **no functional NAND backups**, this guide is for you. +Εάν υποβαθμίσατε σε 2.1.0, αλλά για κάποιον λόγο δεν έχετε **λειτουργικά αντίγραφα ασφαλείας της NAND σας**, αυτός ο οδηγός είναι για εσάς. {: .notice--success} -Your device may not show your installed games after the ctrtransfer. This is due to the tickets being removed by the transfer, which is why you back them up. They will be restored at the end of the guide. +Η συσκευή σας μπορεί να μην εμφανίζει τα εγκατεστημένα σας παιχνίδια μετά την ctrtransfer. Αυτό συμβαίνει λόγο του ότι τα tickets αφαιρούνται από την ctrtransfer, και γι' αυτό δημιουργείτε αντίγραφα ασφαλείας. Θα επαναφερθούν στο τέλος του οδηγού. {: .notice--info} -Because the point of the 9.2.0 ctrtransfer is to troubleshoot issues caused by the existing NAND, these steps, unlike the 2.1.0 ctrtransfer, will have you backup only the tickets and config save. Failure to back these up will result in the LOSS of all installed games and saves! +Λόγο του ότι ο σκοπός της ctrtransfer 9.2.0 είναι η αντιμετώπιση που προβλημάτων που δημιούργησε η ήδη υπάρχουσα NAND, στα παρακάτω βήματα, σε αντίθεση με την ctrtransfer 2.1.0, θα δημιουργήσετε αντίγραφα ασφαλείας μόνο για τα tickets και το config save. Η αποτυχία της δημιουργίας αντιγράφων επαναφοράς για τα παραπάνω θα οδηγήσει στην απώλεια των εγκατεστημένων παιχνιδιών και των saves σας! {: .notice--danger} -#### What you need +#### Τι χρειάζεστε -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/) -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) -* The 9.2.0 ctrtransfer image for your device and region -*(if your device is not from one of these regions, just pick one that matches your device type)*: - + - [New 3DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:b22d67fd02b3b0e30ac991e451db0f2d32e7beca&dn=9.2.0-20J%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:985d47442dc470d1b9f908256bed041c63885f60&dn=9.2.0-20U%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/) +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) +* Την ctrtransfer 9.2.0 εικόνα για την συσκευή και περιοχή σας +*(εάν η συσκευή σας δεν ανήκει σε κάποια από τις παρακάτω περιοχές, απλά επιλέξτε ένα που ταιριάζει με τον τύπο της συσκευής σας)*: + + - [New 3DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:b22d67fd02b3b0e30ac991e451db0f2d32e7beca&dn=9.2.0-20J%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:985d47442dc470d1b9f908256bed041c63885f60&dn=9.2.0-20U%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) ~ - + - [Old 3DS or 2DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:8d6142313971b08f92257e7fb1c1d5689e34ed78&dn=9.2.0-20E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [Old 3DS or 2DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:24ad2b85e67013ef1f91178dca7ad2e40663b9b2&dn=9.2.0-20J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [Old 3DS or 2DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1dc79a2a0babb45497961888f369423a93135e2b&dn=9.2.0-20U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:8d6142313971b08f92257e7fb1c1d5689e34ed78&dn=9.2.0-20E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:24ad2b85e67013ef1f91178dca7ad2e40663b9b2&dn=9.2.0-20J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1dc79a2a0babb45497961888f369423a93135e2b&dn=9.2.0-20U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -#### Instructions +#### Οδηγίες -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` -2. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card -3. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` -4. Reinsert your SD card into your 3DS +1. Αντιγράψτε το `GodMode9.bin` από το GodMode9 `.zip` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `GodMode9.bin` του φακέλου `/luma/payloads/` σε `up_GodMode9.bin` +2. Αντιγράψτε την εικόνα της ctrtransfer 9.2.0 `.bin` και `.bin.sha` από το ctrtransfer `.zip` στον φάκελο `/files9/` στην κάρτα SD +3. Αντιγράψτε το `Decrypt9WIP.bin` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `Decrypt9WIP.bin` σε `x_Decrypt9WIP.bin` +4. Επανατοποθετήστε την κάρτα SD στο 3DS σας -##### Section II - Backup tickets and config save +##### Ενότητα II - Αντίγραφα ασφαλείας των tickets και του config save -1. Open Decrypt9 from arm9loaderhax by holding (X) during boot -2. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -3. Press (Select) to eject your SD card, then put it in your computer -4. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" - + If none start with "00-", then just delete all of them -5. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -6. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +1. Ανοίξτε το Decrypt9 από το arm9loaderhax κρατώντας πατημένο το (X) κατά την εκκίνηση +2. Μεταβείτε στο "Ticket/Titlekey Options" και έπειτα επιλέξτε "Ticket Dump (SysNAND)" +3. Πατήστε (Select) για να αφαιρέσετε την κάρτα SD και έπειτα τοποθετήστε την στον υπολογιστή σας +4. Διαγράψτε όλα τα αρχεία `.tik` στον φάκελο `/files9/` τα οποία **δεν** αρχίζουν με "00-" + + Σε περίπτωση που κανένα δεν αρχίζει με "00-", διαγράψτε τα όλα +5. Επανατοποθετήστε την κάρτα SD στο 3DS και έπειτα πατήστε (B) για να επιστρέψετε στο Αρχικό Μενού +6. Μεταβείτε στο "SysNAND Options", έπειτα στο "System Save Dump" και μετά επιλέξτε "Dump configsave.bin" -##### Section III - ctrtransfer +##### Ενότητα III - ctrtransfer -1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer" -2. Input the key combo given, then select the 9.2.0 ctrtransfer image when prompted by pressing (A) -3. If you do not already have a NAND backup, **Backup SysNAND to `NANDmin.bin` when prompted by pressing (A)** -4. Allow the transfer process to proceed automatically, this will take some time -5. Once the transfer is complete, press (Select) to eject your SD card -6. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location - + Make backups in multiple locations - + This backup will save you from a brick if anything goes wrong in the future -7. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card -8. Reinsert your SD card into your 3DS -9. Press (Start) to reboot -10. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + Updates while using A9LH + Luma (what you have) are safe, stop asking about it - + If this gives you an error, set your DNS settings to "auto" +1. Μεταβείτε στο "SysNAND Options", μετά στο "CTRNAND Transfer", και έπειτα "Auto CTRNAND Transfer" +2. Εισάγετε το συνδυασμό πλήκτρων που σας ζητείται, στη συνέχεια επιλέξτε την 9.2.0 ctrtransfer εικόνα όταν σας ζητηθεί πιέζοντας το (A) +3. Εάν δεν έχετε ήδη αντίγραφα ασφαλείας της NAND, **Δημιουργήστε αντίγραφα ασφαλείας της SysNAND στο `NANDmin.bin` όταν σας ζητηθεί πατώντας (A)** +4. Επιτρέψτε στην διαδικασία της μεταφοράς να συνεχιστεί αυτόματα, η οποία μπορεί να διαρκέσει αρκετά λεπτά +5. Μόλις η μεταφορά ολοκληρωθεί, πατήστε (Select) για να εξάγετε την κάρτα SD +6. Τοποθετήστε την κάρτα SD στον υπολογιστή σας, και έπειτα αντιγράψτε τα αρχεία `NANDmin.bin` και `NANDmin.bin.sha` από τον φάκελο `/files9/` της κάρτας SD σε κάποια ασφαλής τοποθεσία + + Δημιουργήστε αντίγραφα ασφαλείας σε πολλαπλές τοποθεσίες + + Αυτά τα αντίγραφα ασφαλείας θα σας σώσουν από την αχρήστευση της συσκευής σε περίπτωση που κάτι πάει στραβά στο μέλλον +7. Διαγράψτε τα αρχεία ctrtransfer 9.2.0 `.bin` και `.bin.sha` από τον φάκελο `/files9/` στην κάρτα SD +8. Επανατοποθετήστε την κάρτα SD στο 3DS σας +9. Πατήστε (Start) για να επανεκκινήσετε το 3DS +10. Ενημερώστε το 3DS σας πηγαίνοντας στο System Settings, έπειτα στην επιλογή "Other Settings" και μετά πηγαίνοντας μέχρι το τέλος προς τα δεξιά, βρίσκοντας την επιλογή "System Update" + + Οι ενημερώσεις συστήματος ενώ χρησιμοποιείτε το A9LH + Luma (ό, τι έχετε) είναι ασφαλείς, σταματήστε να ρωτάτε + + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto" -##### Section IV - Restore config save +##### Ενότητα IV - Επαναφορά του config save -1. Reboot holding (X) during boot to launch arm9loaderhax Decrypt9 -2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" -3. Press (B) to get back to the main menu +1. Επανεκκινήστε κρατώντας πατημένο το (X) κατά την εκκίνηση για να ανοίξετε το Decrypt9 του arm9loaderhax +2. Μεταβείτε στην επιλογή "SysNAND Options", έπειτα επιλέξτε "System Save Inject" και μετά "Inject configsave.bin" +3. Πατήστε (B) για να επιστρέψετε στο αρχικό μενού ##### Section V - Injecting FBI -1. Go to "SysNAND Options", then "Miscellaneous", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -2. Press (B), then select the "Health&Safety Inject" option -3. Select the FBI injectable `.app` for your region -4. Press (A) and confirm to inject -5. Press (Start) to reboot -6. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +1. Πηγαίνετε στη επιλογή "SysNAND Options" έπειτα "Miscellaneous" και μετά επιλέξτε "Health&Safety Dump" ώστε να αντιγράψετε το Health & Safety στο `hs.app` **(Μπορείτε να χρησιμοποιήσετε τα κουμπιά Πάνω και Κάτω/Αριστερά και Δεξιά για να αλλάξετε το όνομα)** +2. Πατήστε (B) και έπειτα επιλέξτε το "Health&Safety Inject" +3. Επιλέξτε το αρχείο του FBI `.app` για την περιοχή σας +4. Πατήστε (A) και επιβεβαιώστε την εισαγωγή +5. Πατήστε (Start) για να επανεκκινήσετε το 3DS +6. Εάν εξακολουθείτε να εκκινείτε την κανονική εφαρμογή Health & Safety, και έχετε υποβαθμίσει την κονσόλα σας χρησιμοποιώντας μια Gateway στο παρελθόν, [ακολουθήστε αυτόν τον οδηγό επίλυσης προβλημάτων](troubleshooting#gw_fbi) -##### Section VI - Reinstalling Tickets +##### Ενότητα VI - Επανεγκατάσταση των Tickets -If you had no tickets beginning with 00- earlier, you can skip this section. +Εάν δεν είχατε κανένα ticket που να άρχιζε με 00- νωρίτερα, μπορείτε να παραλείψετε αυτήν την ενότητα. {: .notice--info} -1. Open FBI -2. Select "SD" -3. Select "files9" -4. Select "\" -5. Select "Install and delete all tickets" -6. Wait. The system may appear to freeze, just give it time. -7. Press (A) to confirm -8. Press (B) to decline installing tickets from CDN. -9. Exit with the home button +1. Ανοίξτε το FBI +2. Επιλέξτε "SD" +3. Επιλέξτε "files9" +4. Επιλέξτε "\" +5. Επιλέξτε "Install and delete all tickets" +6. Υπομονή. Μπορεί να φαίνεται σαν να πάγωσε το σύστημα, απλά δώστε του χρόνο. +7. Πατήστε (A) για επιβεβαίωση +8. Πατήστε (B) για να αρνηθείτε την εγκατάσταση των tickets από το CDN. +9. Πραγματοποιήστε έξοδο πατώντας το home button -Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). +___ + +Η μορφοποίηση της συσκευής μετά από μια ctrtransfer *χωρίς την επαναφορά του config save* μπορεί να οδηγήσει σε προβλήματα με την φωτεινότητα/τρεμοπαίξιμο της οθόνης. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} -Return to [Installing arm9loaderhax](installing-arm9loaderhax). +Επιστροφή στο [Εγκατάσταση του arm9loaderhax](installing-arm9loaderhax). {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Cart-Update.txt b/_pages/el_GR/Cart-Update.txt index b7d2d4595..975c1fa14 100644 --- a/_pages/el_GR/Cart-Update.txt +++ b/_pages/el_GR/Cart-Update.txt @@ -1,29 +1,29 @@ --- -title: "Cart Update" # -lang: en -permalink: /cart-update.html +title: "Ενημέρωση μέσω Κασέτας" # +lang: el +permalink: /el_GR/cart-update.html --- -All game carts contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection). +Όλες οι κασέτες περιέχουν την απαιτούμενη έκδοση συστήματος για να λειτουργήσουν επιτρέποντας σε όσους βρίσκονται σε χαμηλότερη έκδοση τη χρήση της κασέτας για αναβάθμιση έκδοσης (ακόμα και χωρίς σύνδεση στο διαδίκτυο). {: .notice--info} -Cart Updates will only deliver updates to core features, such as the System Settings, Home Menu, Nintendo 3DS Sound, etc. Cart Updates will not deliver updates to Network features, such as System Transfer, Internet Browser, StreetPass Mii Plaza or eShop. +Οι ενημερώσεις από κασέτες θα αναβαθμίσουν μόνο τις βασικές λειτουργίες του συστήματος όπως το System Settings, το Home Menu, το Nintendo 3DS Sound, κλπ. Οι αναβαθμίσεις από κασέτες δεν θα ενημερώσουν λειτουργίες δικτύου, όπως το System Transfer, το πρόγραμμα περιήγησης, το StreetPass Mii Plaza ή το eShop. {: .notice--info} -This means that a cart update will NOT install a browser if you do not already have one. This will **only** update the actual system version *(for example, 2.1.0-0 -> 6.0.0-0)*. The last number *(the -0)* will **not** change. +Αυτό σημαίνει πως η αναβάθμιση από κασέτα ΔΕΝ θα εγκαταστήσει το πρόγραμμα περιήγησης, εάν δεν έχετε ήδη ένα. Θα αναβαθμίσει **μόνο** την έκδοση του συστήματος *(για παράδειγμα, 2.1.0-0 -> 6.0.0-0)*. Ο τελευταίος αριθμός *(το-0)* **δεν** θα αλλάξει. {: .notice--warning} -**Updating with a game cart containing the version 9.9.0 or above will remove your browser!** +**Η αναβάθμιση με μία κασέτα παιχνιδιού η οποία περιέχει την έκδοση 9.9.0 και πάνω θα αφαιρέσει το πρόγραμμα περιήγησης!** {: .notice--danger} -#### What you need +#### Τι χρειάζεστε -* A game cart that [contains the version](http://www.3dsdb.com/) specified in the chart +* Μία κασέτα παιχνιδιού που να [περιέχει την έκδοση](http://www.3dsdb.com/) που ορίζεται στο διάγραμμα -#### Instructions +#### Οδηγίες -1. Boot your 3DS into recovery mode by holding L+R+A+UP while powering on -2. Decline the update and reboot -3. Put the game in the system -4. Attempt to launch the game -5. Update when prompted \ No newline at end of file +1. Εκκινήστε το 3DS σε λειτουργία ανάκτησης κρατώντας πατημένα τα L+R+A+UP ενώ ενεργοποιήτε την συσκευή +2. Αρνηθείτε την ενημέρωση και επανεκκινήστε +3. Εισάγετε το παιχνίδι στο σύστημα +4. Προσπαθήστε να εκκινήσετε το παιχνίδι +5. Ενημερώστε όταν σας ζητηθεί \ No newline at end of file diff --git a/_pages/el_GR/Credits.txt b/_pages/el_GR/Credits.txt index 84d3db62b..761305e4c 100644 --- a/_pages/el_GR/Credits.txt +++ b/_pages/el_GR/Credits.txt @@ -1,16 +1,16 @@ --- -title: "Credits" # -lang: en -permalink: /credits.html +title: "Ευχαριστίες" # +lang: el +permalink: /el_GR/credits.html --- -**Special thanks to all of [#Cakey on Freenode](http://webchat.freenode.net/?channels=%23Cakey) for being awesome!** +**Ευχαριστώ ιδιαίτερα όλο το [#Cakey στο Freenode](http://webchat.freenode.net/?channels=%23Cakey) που ήταν υπέροχοι!** {: .notice--primary} -**Special thanks to all of [the translators](https://translate.3ds.guide/) for being awesome!** +**Ευχαριστώ ιδιαίτερα όλους τους [μεταφραστές](https://translate.3ds.guide/) που ήταν υπέροχοι!** {: .notice--primary} -If I forgot you here, contact me and I'll add your name. +Εάν σας ξέχασα, επικοινωνήστε μαζί μου ώστε να προσθέσω το όνομά σας. {: .notice} + AHP_Person @@ -23,7 +23,7 @@ If I forgot you here, contact me and I'll add your name. + Cartman123 + Cell9 + coder65535 -+ Cruel` ++ Cruel + d0k3 + dank101 + dark_samus diff --git a/_pages/el_GR/Decrypt9-(Browser).txt b/_pages/el_GR/Decrypt9-(Browser).txt index b667eafd7..6e53b8923 100644 --- a/_pages/el_GR/Decrypt9-(Browser).txt +++ b/_pages/el_GR/Decrypt9-(Browser).txt @@ -1,32 +1,34 @@ --- title: "Decrypt9 (Browser)" # -lang: en -permalink: /decrypt9-(browser).html +lang: el +permalink: /el_GR/decrypt9-(browser).html --- -The first thing this guide will do is get you running Decrypt9, which is a multipurpose toolkit that will allow us to install the version 2.1.0, which contains a vulnerability that is needed for further exploitation of the system. +Το πρώτο πράγμα που θα κάνει αυτός ο οδηγός είναι να σας τρέξει το Decrypt9, το οποίο είναι ένα εργαλείο πολλαπλών χρήσεων που θα μας επιτρέψει να εγκαταστήσουμε την έκδοση 2.1.0, η οποία περιέχει μια ευπάθεια του συστήματος που απαιτείται για την περαιτέρω εκμετάλλευσή του. {: .notice} -If you have already hacked your 3DS before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). +Εάν έχετε ήδη χακάρει το 3DS σας και έχετε CFW βασισμένο στην EmuNAND, ο οδηγός αυτός ασχολείται αποκλειστικά με τη SysNAND και θα πρέπει να ακολουθήσετε όλες τις οδηγίες που εφαρμόζονται στην SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection). {: .notice--info} -#### What you need +#### Τι χρειάζεστε -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) -#### Instructions +#### Οδηγίες -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `Launcher.dat` and `Decrypt9WIP.dat` from the Decrypt9WIP `.zip` to the root of your SD card -3. Reinsert your SD card into your 3DS -4. Open the browser and go to one of the following URLs on your 3DS +1. Δημιουργήστε έναν φάκελο με το όνομα `files9` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη +2. Αντιγράψτε τα αρχεία `Launcher.dat` και `Decrypt9WIP.dat` από το Decrypt9WIP `.zip`στη ρίζα της κάρτας SD +3. Επανατοποθετήστε την κάρτα SD στο 3DS σας +4. Ανοίξτε το πρόγραμμα περιήγησης και μεταβείτε σε μία από τις ακόλουθες διευθύνσεις στο 3DS σας + `https://dukesrg.github.io/?Decrypt9WIP.dat` + `http://go.gateway-3ds.com/` + `http://www.reboot.ms/3ds/load.html?Launcher.dat` + `http://dukesrg.dynu.net/3ds/rop?GW17567.dat&Launcher.dat` - + Make sure to try each URL if the first one doesn't work (some versions cannot use the first one, and some versions cannot use the last three) - + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) -5. If the exploit was successful, you will have booted into Decrypt9 + + Φροντίστε να δοκιμάσετε όλες τις διευθύνσεις URL σε περίπτωση που η πρώτη δεν δουλέψει (μερικές εκδόσεις δεν μπορούν να χρησιμοποιήσουν την πρώτη και κάποιες εκδόσεις δεν μπορούν να χρησιμοποιήσουν τις τελευταίες τρεις) + + Εάν αντιμετωπίσετε τυχόν σφάλματα, [ακολουθήστε αυτόν τον οδηγό αντιμετώπισης προβλημάτων](troubleshooting#ts_browser) +5. Εάν το exploit πραγματοποιήθηκε επιτυχώς, θα έχετε εκκινήσει στο Decrypt9 -Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). +___ + +Συνέχεια στο [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt b/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..d25bc6a66 100644 --- a/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/el_GR/Decrypt9-(Homebrew-Launcher).txt @@ -1,32 +1,34 @@ --- title: "Decrypt9 (Homebrew Launcher)" # -lang: en -permalink: /decrypt9-(homebrew-launcher).html +lang: el +permalink: /el_GR/decrypt9-(homebrew-launcher).html --- -#### What you need +#### Τι χρειάζεστε -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) -* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) -* The latest release of [fasthax](https://github.com/nedwill/fasthax/releases/latest) +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) +* Την τελευταία έκδοση του [safehax](https://github.com/TiniVi/safehax/releases/latest) +* Την τελευταία έκδοση του [fasthax](https://github.com/nedwill/fasthax/releases/latest) -#### Instructions +#### Οδηγίες -1. Remove your SD card from your device, leaving it on the Homebrew Launcher, then insert your SD card into your computer -2. Create a folder named `files9` on the root of your SD card if it does not already exist -3. Copy `safehax.3dsx` to the `/3ds/` folder on your SD card -4. Copy `fasthax.3dsx` to the `/3ds/` folder on your SD card -5. Copy `Decrypt9WIP.bin` from the Decrypt9WIP `.zip` to the root of your SD card and rename `Decrypt9WIP.bin` to `safehaxpayload.bin` -6. Reinsert your SD card into your 3DS -7. Launch fasthax from the list of homebrew - + You may have to scroll down to see this option -8. Once it has completed, press (Start) to exit back to the Homebrew Launcher - + This may take several tries - + If it freezes, just force the console to power off by holding the power button, then try again -9. Launch safehax from the list of homebrew - + You may have to scroll down to see this option - + If it freezes, just force the console to power off by holding the power button, then try again -10. If the exploit was successful, you will have booted into Decrypt9 +1. Αφαιρέστε την κάρτα SD από τη συσκευή σας, αφήνοντας το 3DS στο Homebrew Launcher και στη συνέχεια τοποθετήστε την κάρτα SD στον υπολογιστή σας +2. Δημιουργήστε έναν φάκελο με το όνομα `files9` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ίδη +3. Αντιγράψτε το `safehax.3dsx` στον φάκελο `/3ds/` στην κάρτα SD +4. Αντιγράψτε το `fasthax.3dsx` στον φάκελο `/3ds/` στην κάρτα SD +5. Αντιγράψτε το `Decrypt9WIP.bin` από το Decrypt9WIP `.zip` στην ρίζα της κάρτας SD και μετονομάστε το `Decrypt9WIP.bin` σε `safehaxpayload.bin` +6. Επανατοποθετήστε την κάρτα SD στο 3DS +7. Εκκινήστε το fasthax από τη λίστα των homebrew εφαρμογών + + Ίσως χρειαστεί να προχωρήσετε προς τα κάτω για να δείτε αυτή την επιλογή +8. Μόλις ολοκληρωθεί, πατήστε (Start) για να επιστρέψετε στο homebrew launcher + + Μπορεί να χρειαστούν αρκετές προσπάθειες + + Εάν δείχνει ότι έχει παγώσει, επιβάλλετε την απενεργοποίηση της κονσόλας κρατώντας πατημένο το κουμπί τροφοδοσίας και δοκιμάστε ξανά +9. Εκκινήστε το safehax από τη λίστα των homebrew εφαρμογών + + Ίσως χρειαστεί να προχωρήσετε προς τα κάτω για να δείτε αυτή την επιλογή + + Εάν δείχνει ότι έχει παγώσει, επιβάλλετε την απενεργοποίηση της κονσόλας κρατώντας πατημένο το κουμπί τροφοδοσίας και δοκιμάστε ξανά +10. Εάν το exploit πραγματοποιήθηκε επιτυχώς, θα έχετε εκκινήσει στο Decrypt9 -Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) +___ + +Συνέχεια στο [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Decrypt9-(MSET).txt b/_pages/el_GR/Decrypt9-(MSET).txt index 6eae08ad6..bbde5896e 100644 --- a/_pages/el_GR/Decrypt9-(MSET).txt +++ b/_pages/el_GR/Decrypt9-(MSET).txt @@ -1,33 +1,35 @@ --- title: "Decrypt9 (MSET)" # -lang: en -permalink: /decrypt9-(mset).html +lang: el +permalink: /el_GR/decrypt9-(mset).html --- -The first thing this guide will do is get you running Decrypt9, which is a multipurpose toolkit that will allow us to install the version 2.1.0, which contains a vulnerability that is needed for further exploitation of the system. +Το πρώτο πράγμα που θα κάνει αυτός ο οδηγός είναι να σας τρέξει το Decrypt9, το οποίο είναι ένα εργαλείο πολλαπλών χρήσεων που θα μας επιτρέψει να εγκαταστήσουμε την έκδοση 2.1.0, η οποία περιέχει μια ευπάθεια του συστήματος που απαιτείται για την περαιτέρω εκμετάλλευσή του. {: .notice} -If you have already hacked your 3DS before and have a EmuNAND based CFW setup, this guide deals exclusively with SysNAND and you should follow all instructions from within or applying to SysNAND. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). +Εάν έχετε κάνει ήδη hack το 3DS σας και έχετε CFW βασισμένο στην EmuNAND, ο οδηγός αυτός ασχολείται αποκλειστικά με τη SysNAND και θα πρέπει να ακολουθήσετε όλες τις οδηγίες που εφαρμόζονται στην SysNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection). {: .notice--info} -#### What you need +#### Τι χρειάζεστε -* DS flashcard that works on your 3DS version -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) +* Μια DS flashcard η οποία δουλεύει με την έκδοση του 3DS σας +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest/) -#### Instructions +#### Οδηγίες -1. Create a folder named `files9` on the root of your SD card if it does not already exist -2. Copy `Launcher.dat` and `Decrypt9WIP.dat` from the Decrypt9WIP `.zip` to the root of your SD card -3. Reinsert your SD card into your 3DS -4. Put `Decrypt9.nds` from the Decrypt9 `.zip` on your DS flashcard -5. Start your DS flashcard from your 3DS -6. Boot `Decrypt9.nds` using your flashcart -7. Select the correct option for your system version +1. Δημιουργήστε έναν φάκελο με το όνομα `files9` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη +2. Αντιγράψτε τα αρχεία `Launcher.dat` και `Decrypt9WIP.dat` από το Decrypt9WIP `.zip`στη ρίζα της κάρτας SD +3. Επανατοποθετήστε την κάρτα SD στο 3DS +4. Τοποθετήστε το αρχείο `Decrypt9.nds` από το Decrypt9 `.zip` στη DS flashcard +5. Εκκινήστε την DS flashcard σας από το 3DS +6. Εκκινήστε το `Decrypt9.nds` χρησιμοποιώντας τη flashcard σας +7. Επιλέξτε την σωστή επιλογή για την έκδοση του συστήματός σας + 4.X.X -> "4.x Decrypt9WIP" + 6.X.X -> "6.x Decrypt9WIP" -8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" -9. If the exploit was successful, you will have booted into Decrypt9 +8. Επανεκκινήστε το σύστημα, πηγαίνετε στο System Settings, έπειτα στην επιλογή "Other Settings", μετά "Profile" και τελικά "Nintendo DS Profile" +9. Εάν το exploit πραγματοποιήθηκε επιτυχώς, θα έχετε εκκινήσει στο Decrypt9 -Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). +___ + +Συνέχεια στο [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/F3-(Linux).txt b/_pages/el_GR/F3-(Linux).txt index f3217f9d2..e501c63ba 100644 --- a/_pages/el_GR/F3-(Linux).txt +++ b/_pages/el_GR/F3-(Linux).txt @@ -51,6 +51,7 @@ permalink: /el_GR/f3-(linux).html Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Εάν το τεστ δείχνει το αποτέλεσμα `Data LOST: 0.00 Byte (0 sectors)` η κάρτα SD είναι καλά και μπορείτε να διαγράψετε όλα τα αρχεία `.h2w` που βρίσκονται σε αυτήν {: .notice--success} diff --git a/_pages/el_GR/F3X-(Mac).txt b/_pages/el_GR/F3X-(Mac).txt index 6fd4ba68f..9163654fb 100644 --- a/_pages/el_GR/F3X-(Mac).txt +++ b/_pages/el_GR/F3X-(Mac).txt @@ -1,36 +1,38 @@ --- title: "F3X (Mac)" # -lang: en -permalink: /f3x-(mac).html +lang: el +permalink: /el_GR/f3x-(mac).html --- -This page will walk you through the process of checking your SD card for errors using F3X. +Αυτή η σελίδα θα σας καθοδηγήσει ώστε να ελέγξετε την κάρτα SD για σφάλματα χρησιμοποιώντας το F3X. {: .notice} -Depending on the size of your SD card and the speed of your computer, this process can take up to several hours! +Ανάλογα με το μέγεθος της κάρτας SD και την ταχύτητα του υπολογιστή σας, αυτή η διαδικασία ενδέχεται να διαρκέσει πολλές ώρες! {: .notice--info} -This page is for Mac users only. If you are not on Mac, check out the [H2testw (windows)](h2testw-(windows)) or [F3 (Linux)](f3-(linux)) pages. +Αυτή η σελίδα είναι μόνο για χρήστες Mac. Εάν δεν είστε σε Mac, δείτε τις σελίδες [H2testw (windows)](h2testw-(windows)) ή [F3 (Linux)](f3-(linux)). {: .notice--info} -#### What you need +#### Τι χρειάζεστε -* The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest) +* Την τελευταία έκδοση του [F3X](https://github.com/insidegui/F3X/releases/latest) -#### Instructions +#### Οδηγίες -1. Unzip the F3X `.zip` file -2. Insert your SD card into your computer -3. Run the F3X app -4. Select your SD card -5. Press "Start Test" -6. Wait until the process is complete. +1. Αποσυμπιέστε το αρχείο `.zip` του F3X +2. Εισάγετε την κάρτα SD στον υπολογιστή σας +3. Εκκινήστε την εφαρμογή F3X +4. Επιλέξτε την κάρτα SD σας +5. Πατήστε "Start Test" +6. Περιμένετε μέχρι να ολοκληρωθεί η διαδικασία. -If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card +___ + +Εάν το τεστ δείξει το αποτέλεσμα `Success! Your card is ok!` η κάρτα SD είναι καλά και μπορείτε να διαγράψετε όλα τα αρχεία `.h2w` από αυτήν {: .notice--success} If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it! {: .notice--danger} -Return to [Get Started](get-started) +Επιστροφή στο [Ας αρχίσουμε](get-started) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/FAQ.txt b/_pages/el_GR/FAQ.txt index 8f90a048c..b4871f903 100644 --- a/_pages/el_GR/FAQ.txt +++ b/_pages/el_GR/FAQ.txt @@ -1,56 +1,56 @@ --- -title: "FAQ" # -lang: en -permalink: /faq.html +title: "Συχνές Ερωτήσεις" # +lang: el +permalink: /el_GR/faq.html --- -**Q:** *I am on the latest system version, is my device hackable?* -**A:** No +**Ε:** *Βρίσκομαι στην τελευταία έκδοση λογισμικού, μπορεί η συσκευή μου να χακαριστεί;* +**A:** Όχι -**Q:** *How do I update Luma3DS?* -**A:** Use Luma3DS Updater +**Ε:** *Πώς ενημερώνω το Luma3DS;* +**Α:** Χρησιμοποιώντας το Luma3DS Updater -**Q:** *I heard about this thing I have to pay for (Gateway, Sky3DS, etc), is that something I need?* -**A:** No. arm9loaderhax is a superior method of loading hax that runs early in boot and opens up the opportunity for things such as true custom firmware. +**Ε:** Άκουσα για κάτι για το οποίο πρέπει να πληρώσω (Gateway, Sky3DS, κλπ.), είναι απαραίτητο;* +**A:** Όχι. Το arm9loaderhax είναι μία ανώτερη μέθοδος φόρτωσης hax, το οποίο τρέχει κατά την εκκίνηση και δίνει την ευκαιρία για πράγματα όπως πραγματικό Custom Firmware. -**Q:** *How do I move saves from an existing Gateway setup to device installed games?* -**A:** See [this](https://gbatemp.net/threads/425743/) +**Ε:** *Πώς μεταφέρω τα αρχεία αποθήκευσης από μία Gateway σε παιχνίδια εγκατεστημένα στην συσκευή;* +**A:** Δείτε [this](https://gbatemp.net/threads/425743/) -**Q:** *What do I need to do this guide?* -**A:** This guide can be completely done with free software + ** E: ** *Τι χρειάζομαι για να ακολουθήσω αυτόν τον οδηγό;* +**A:** Ο οδηγός αυτός μπορεί να ολοκληρωθεί με δωρεάν λογισμικό -**Q:** *How risky is hacking my console?* -**A:** Bricks are now *basically* impossible unless you ignore/circumvent all safety checks. +**Ε:** *Υπάρχει κίνδυνος όταν χακάρω την κονσόλα μου;* +**Α:** Τώρα πλέον, είναι *βασικά* αδύνατον να αχρηστεύσετε την συσκευή σας, εκτός και αν αγνοείστε/προσπεράσετε όλα τα μέτρα ασφαλείας. -**Q:** *Can I run awesome homebrew and emulators with this?* -**A:** Yes! Custom Firmware not only enables the Homebrew Launcher, but it also will give you hacks on all versions, which means you keep it forever, even with updates. +**E:** *Μπορώ να χρησιμοποιήσω τα απίστευτα homebrew και emulators με αυτόν τον οδηγό;* +**Α:** Ναι! Το Custom Firmware όχι μόνο επιτρέπει την χρήση του Homebrew Launcher, αλλά σας προσφέρει επίσης hacks για όλες τις εκδόσεις, που σημαίνει ότι θα το κρατήσετε για πάντα, ακόμη και με ενημερώσεις. -**Q:** *Can I use this to play games from other regions?* -**A:** Luma3DS supports Region Free patches, which enables users to install games from any region without any extra modification or steps. +**E:** *Μπορώ να χρησιμοποιήσω αυτό τον οδηγώ για να παίξω παιχνίδια από άλλες περιοχές;* +**Α:** Το Luma3DS υποστηρίζει patch για Region Free, τα οποία επιτρέπουν στους χρήστες να εγκαταστήσουν παιχνίδια από οποιαδήποτε περιοχή χωρίς περαιτέρω τροποποιήσεις. -**Q:** *Is it safe to update CFW SysNAND?* -**A:** Yes. This is safe, stop asking about it. +**Ε:** *Είναι ασφαλές να ενημερώσω τη SysNAND του CFW;* +**Α:** Ναι. Είναι ασφαλές, σταματήστε να το ρωτάτε. -**Q:** *Where should I go for support?* -**A:** For support, ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp). +**Ε:** *Πού θα έπρεπε να πάω για υποστήριξη;* +**A:** Για υποστήριξη, ζητήστε βοήθεια στο [#3dshacks στο Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) ή στο [3DS Hacking στο Discord](https://discord.gg/MWxPgEp). -**Q:** *Can I do this with a 4GB (or smaller) SD card?* -**A:** Thanks to the new CTRNAND method, yes! +**Ε:** *Μπορώ να πραγματοποιήσω τον οδηγό με μια κάρτα SD των 4GB (ή μικρότερη);* +**Α:** Χάρη στην νέα μέθοδο CTRNAND, ναι! -**Q:** *Can I use a 128 GB (or larger) SD card?* -**A:** Yes, but some users have reported slowdowns when using such large sizes. Note that you cannot format the card with exFAT; you need to format it with FAT32. +**Ε:** *Μπορώ να χρησιμοποιήσω μια κάρτα SD των 128 GB (ή μεγαλύτερη);* +**Α:** Ναι, αλλά κάποιοι χρήστες έχουν αναφέρει καθυστερήσεις κατά χρήση τόσο μεγάλων μεγεθών. Σημειώστε πως δεν μπορείτε να διαμορφώσετε την κάρτα με exFAT· χρειάζεστε να την διαμορφώσετε με FAT32. -**Q:** *How do I move to a new SD card at the end of this?* -**A:** Just copy all the files to the new SD card. +**Ε:** *Πώς αλλάζω κάρτα SD στο τέλος αυτού του οδηγού:* +**Α:** Απλά αντιγράψτε όλα τα αρχεία στην καινούργια κάρτα SD. -**Q:** *Can I keep my NNID?* -**A:** If you start with an NNID and follow every step, you will end up keeping your NNID at the end. +**Ε:** *Μπορώ να διατηρήσω το NNID μου;* +**Α:** Εάν αρχίσετε με ένα NNID και ακολουθήσετε κάθε βήμα, στο τέλος θα καταλήξετε να διατηρήσετε το NNID σας. -**Q:** *What about System Transfers?* -**A:** Once you have completed the guide, you can system transfer to and from an arm9loaderhax'd 3DS or 2DS exactly like you would a regular stock console or EmuNAND (you will lose any non-legitimate games/themes/DLC in the transfer; saves will stay even for games that are lost). +**E:** *Σχετικά με τα System Transfers;* +**A:** Μόλις ολοκληρώσετε τον οδηγό, μπορείτε να πραγματοποιήσετε System Transfer σε και από ένα 3DS ή 2DS με arm9loaderhax όπως θα κάνετε με μία κανονική κονσόλα ή EmuNAND (θα χάσετε όλα τα παιχνίδια/θέματα/DLC κατά την μεταφορά· τα saves θα παραμείνουν ακόμα και για παιχνίδια που χάθηκαν). -**Q:** *Can I do this without a computer (e.g. an Android phone)?* -**A:** All you need is the ability to put files on an SD card! +**Ε:** *Μπορώ να πραγματοποιήσω τον οδηγό χωρίς την χρήση υπολογιστή (π.χ. ενός τηλεφώνου Android);* +**Α:** Το μόνο που χρειάζεστε είναι η ικανότητα να τοποθετείτε αρχεία στην κάρτα SD! -**Q:** *Help! Something bad happened and now I cannot boot...* -**A:** Please look at the [troubleshooting guide](troubleshooting). \ No newline at end of file +**Ε:** *Βοήθεια! Κάτι άσχημο συνέβη και δεν μπορώ να πραγματοποιήσω εκκίνηση...* +**Α:** Επισκεφθείτε τον [οδηγό επίλυσης σφαλμάτων](troubleshooting). diff --git a/_pages/el_GR/Get-Started-(New-3DS).txt b/_pages/el_GR/Get-Started-(New-3DS).txt index b0b5fd91f..444309491 100644 --- a/_pages/el_GR/Get-Started-(New-3DS).txt +++ b/_pages/el_GR/Get-Started-(New-3DS).txt @@ -1,19 +1,19 @@ --- -title: "Get Started (New 3DS)" # -lang: en -permalink: /get-started-(new-3ds).html +title: "Ξεκινώντας (New 3DS)" # +lang: el +permalink: /el_GR/get-started-(new-3ds).html --- -Select the appropriate page for your version from the chart below. +Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. {: .notice--primary} {::comment} {% capture notice-1 %} -The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. +Οι τελευταίες 2 στήλες του διαγράμματος αναφέρονται στο τελευταίο νούμερο της έκδοσής σας (που αντιστοιχεί στην έκδοση του προγράμματος περιήγησης που είναι εγκατεστημένο στο σύστημα). Εάν η έκδοση είναι -0 τότε δεν έχετε πρόγραμμα περιήγησης, ενώ κάθε αριθμός πάνω από το -0 υποδεικνύει ότι υπάρχει εγκατεστημένο πρόγραμμα περιήγησης. -The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. +Τα πεδία "από" και "έως" είναι περιεκτικά. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0. -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. +Στην περίπτωση της έκδοσης "5.0.0-0U" για παράδειγμα, θα ακολουθούσατε την στήλη "Χωρίς Πρόγραμμα Περιήγησης" και τη σειρά 5.0.0 έως 5.1.1, διότι το σύστημα είναι στην έκδοση εκείνης της εμβέλειας και δεν έχει πρόγραμμα περιήγησης εγκατεστημένο. {% endcapture %}
{{ notice-1 | markdownify }}
@@ -25,7 +25,7 @@ For all versions you can also [Cart Update](cart-update) to a higher version in {:/comment} {::comment} -If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column. +Εάν ενημερώσατε χρησιμοποιώντας μια κασέτα παιχνιδιού η οποία περιείχε την έκδοση 9.9.0 και πάνω *(που σημαίνει πως βρίσκετε στην έκδοση 9.9.0 και πάνω, αλλά το πρόγραμμα περιήγησης σας είναι σε έκδοση -25 και κάτω, όπως 10.2.0-24)*, το πρόγραμμα περιήγησης σας αφαιρέθηκε και θα πρέπει να χρησιμοποιήσετε την στήλη "Χωρίς Πρόγραμμα Περιήγησης". {: .notice--warning} {:/comment} diff --git a/_pages/el_GR/Get-Started-(Old-3DS).txt b/_pages/el_GR/Get-Started-(Old-3DS).txt index d53e5fcf9..c60cad9c3 100644 --- a/_pages/el_GR/Get-Started-(Old-3DS).txt +++ b/_pages/el_GR/Get-Started-(Old-3DS).txt @@ -1,29 +1,29 @@ --- -title: "Get Started (Old 3DS)" # -lang: en -permalink: /get-started-(old-3ds).html +title: "Ξεκινώντας (Old 3DS)" # +lang: el +permalink: /el_GR/get-started-(old-3ds).html --- -Select the appropriate page for your version from the chart below. +Επιλέξτε την κατάλληλη σελίδα για την έκδοσή σας από το παρακάτω διάγραμμα. {: .notice--primary} {% capture notice-1 %} -The last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed. +Οι 2 τελευταίες στήλες του διαγράμματος αναφέρονται στο τελευταίο νούμερο της έκδοσής σας (που αντιστοιχεί στην έκδοση του περιηγητή ιστού που έχετε εγκατεστημένο στο σύστημα). Εάν η έκδοση είναι -0 τότε δεν έχετε πρόγραμμα περιήγησης, ενώ κάθε αριθμός πάνω από το -0 υποδεικνύει ότι υπάρχει εγκατεστημένο πρόγραμμα περιήγησης. -The "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0. +Τα πεδία "από" και "έως" είναι περιεκτικά. Αυτό σημαίνει πως, για παράδειγμα, η σειρά "από 9.0.0 έως 9.2.0" περιλαμβάνει τις εκδόσεις 9.0.0, 9.1.0, 9.2.0. -In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed. +Στην περίπτωση της έκδοσης "5.0.0-0U" για παράδειγμα, θα ακολουθούσατε την στήλη "Χωρίς Πρόγραμμα Περιήγησης" και τη σειρά 5.0.0 έως 5.1.1, διότι το σύστημα είναι στην έκδοση εκείνης της εμβέλειας και δεν έχει πρόγραμμα περιήγησης εγκατεστημένο. {% endcapture %}
{{ notice-1 | markdownify }}
-For all versions you can also [Cart Update](cart-update) to a higher version in the same column to follow its instructions. +Για όλες τις εκδόσεις μπορείτε επίσης να [ενημερώσετε από κασέτα](cart-update) σε μια πιο υψηλή έκδοση της ίδιας στήλης, έτσι ώστε ακολουθήσετε τις αντίστοιχες οδηγίες. {: .notice--warning} -If you updated with a game cart containing the version 9.9.0 or above *(meaning that you have a version on 9.9.0 or above, but your browser is on -25 or lower, such as 10.2.0-24)*, your browser was removed and you will need to use the "No Browser" column. +Εάν ενημερώσατε χρησιμοποιώντας μια κασέτα παιχνιδιού η οποία περιείχε την έκδοση 9.9.0 και πάνω *(που σημαίνει πως βρίσκετε στην έκδοση 9.9.0 και πάνω, αλλά το πρόγραμμα περιήγησης είναι σε έκδοση -25 και κάτω, όπως 10.2.0-24)*, το πρόγραμμα περιήγησης σας αφαιρέθηκε και θα πρέπει να χρησιμοποιήσετε την στήλη "Χωρίς Πρόγραμμα Περιήγησης". {: .notice--warning} -The device version can be found at the bottom right of the top screen of the System Settings. +Η έκδοση της συσκευής σας μπορεί να προβληθεί στο κάτω-δεξιά μέρος της πάνω οθόνης στο System Settings. {: .notice--success} diff --git a/_pages/el_GR/H2testw-(Windows).txt b/_pages/el_GR/H2testw-(Windows).txt index 6c672b9a8..8bcb94243 100644 --- a/_pages/el_GR/H2testw-(Windows).txt +++ b/_pages/el_GR/H2testw-(Windows).txt @@ -1,39 +1,41 @@ --- title: "H2testw (Windows)" # -lang: en -permalink: /h2testw-(windows).html +lang: el +permalink: /el_GR/h2testw-(windows).html --- -This page will walk you through the process of checking your SD card for errors using h2testw. +Αυτή η σελίδα θα σας καθοδηγήσει ώστε να ελέγξετε την κάρτα SD για σφάλματα χρησιμοποιώντας το h2testw. {: .notice} -Depending on the size of your SD card and the speed of your computer, this process can take up to several hours! +Ανάλογα με το μέγεθος της κάρτας SD και την ταχύτητα του υπολογιστή σας, αυτή η διαδικασία ενδέχεται να διαρκέσει πολλές ώρες! {: .notice--info} -This page is for Windows users only. If you are not on windows, check out the [F3 (linux)](f3-(linux)) or [F3X (mac)](f3x-(mac)) pages. +Αυτή η σελίδα είναι μόνο για χρήστες Windows. Εάν δεν είστε σε Windows, ελέγξτε τις σελίδες [F3 (linux)](f3-(linux)) ή [F3X (mac)](f3x-(mac)). {: .notice--info} -#### What you need +#### Τι χρειάζεστε -* The latest version of [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip) +* Την τελευταία έκδοση του [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip) -#### Instructions +#### Οδηγίες -1. Copy `h2testw.exe` from the h2testw `.zip` to your desktop -2. Insert your SD card into your computer -3. Run `h2tsetw.exe` -4. Select "English" -5. Click "Select target" -6. Select your SD card's drive letter -7. Ensure "all available space" is selected -8. Click "Write + Verify" -9. Wait until the process is completed +1. Αντιγράψτε το αρχείο `h2testw.exe` από το h2testw `.zip` στην επιφάνεια εργασίας +2. Τοποθετήστε την κάρτα SD στον υπολογιστή σας +3. Εκκινήστε το `h2tsetw.exe` +4. Επιλέξτε "English" +5. Κάντε κλικ στο "Select target" +6. Επιλέξτε το γράμμα που αντιστοιχεί στην κάρτα SD +7. Βεβαιωθείτε πως το "all available space" είναι επιλεγμένο +8. Κάντε κλικ στο "Write + Verify" +9. Περιμένετε μέχρι να ολοκληρωθεί η διαδικασία -If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card +___ + +Εάν το τεστ δείχνει το αποτέλεσμα `Test finished without errors`, η κάρτα SD είναι καλά και μπορείτε να διαγράψετε όλα τα αρχεία `.h2w` που βρίσκονται σε αυτήν {: .notice--success} If the test shows any other results, your SD card may be corrupted or damaged and you may have to replace it! {: .notice--danger} -Return to [Get Started](get-started) +Επιστροφή στο [Ας αρχίσουμε](get-started) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Home.txt b/_pages/el_GR/Home.txt index bc60499b9..15ac2055f 100644 --- a/_pages/el_GR/Home.txt +++ b/_pages/el_GR/Home.txt @@ -10,7 +10,7 @@ header: caption: excerpt: "Ένας πλήρης οδηγός για να αποκτήσετε custom firmware στο 3DS,
από το πρωτότυπο στο arm9loaderhax.
" # lang: el -permalink: /index.html +permalink: /el_GR/index.html --- {% capture notice-home %} @@ -23,10 +23,10 @@ permalink: /index.html **Για να χρησιμοποιήσετε συνδέσμους [magnet](https://en.wikipedia.org/wiki/Magnet_URI_scheme) σε αυτόν τον οδηγό χρειάζεστε ένα torrent client όπως το [Deluge](http://dev.deluge-torrent.org/wiki/Download)** {: .notice--info} -**This guide needs *your* help to [translate](https://translate.3ds.guide/) it to other languages!** +**Αυτός ο οδηγός χρειάζεται την βοήθειά *σας* για την [translate](https://translate.3ds.guide/) του σε άλλες γλώσσες!** {: .notice--success} -**This guide needs *your* help to seed [these](https://3ds.guide/rss.xml) torrents!** +**Αυτός ο οδηγός χρειάζεται την βοήθειά *σας* για να τροφοδοτήσει [these](https://3ds.guide/rss.xml) τα torrent!** {: .notice--success} **Διαβάστε όλες τις εισαγωγικές σελίδες πριν προχωρήσετε.** @@ -34,9 +34,9 @@ permalink: /index.html ## Τι είναι το Homebrew; -Ο όρος [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) συνήθως αναφέρεται σε λογισμικό το οποίο δεν είναι εξουσιοδοτημένο από την Nintendo. Σας επιτρέπει να τρέξετε homebrew παιχνίδια, εργαλεία όπως επεξεργασία αρχείων save και αντιγράφων ασφαλείας και εξομοιωτές για διάφορα παλαιότερα συστήματα. +Ο όρος [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) συνήθως αναφέρεται σε λογισμικό το οποίο δεν είναι εξουσιοδοτημένο από την Nintendo. Σας επιτρέπει να τρέξετε homebrew παιχνίδια, εργαλεία όπως επεξεργασία αρχείων save και αντιγράφων ασφαλείας και emulators για διάφορα παλαιότερα συστήματα. -Στις περισσότερες περιπτώσεις, τρέχοντας το homebrew στην κονσόλα σας είναι 100% δωρεάν χρησιμοποιώντας [μόνο το Nintendo 3DS Sound app](homebrew-launcher-(soundhax)) (εάν βρίσκεστε σε έκδοση >=11.3.0, δεν θα μπορέσετε να προχωρήσετε πέραν του homebrew). Υπάρχουν ωστόσο διάφορες άλλες ευπάθειες σε παιχνίδια εμπορίου και στο πρόγραμμα περιήγησης για να τρέξετε το homebrew. +Στις περισσότερες περιπτώσεις, τρέχοντας το homebrew στην κονσόλα σας είναι 100% δωρεάν χρησιμοποιώντας [μόνο το Nintendo 3DS Sound app](homebrew-launcher-(soundhax)) (εάν βρίσκεστε σε έκδοση >=11.3.0, δεν θα μπορέσετε να προχωρήσετε πέραν του homebrew). There are also various other exploits in commercial games and the browser to get homebrew running. ## Τι είναι το Custom Firmware; @@ -53,27 +53,27 @@ Arm9loaderhax is the newest and best method of launching Custom Firmware that gi The benefits of arm9loaderhax over other Custom Firmware launch methods are numerous, and as such it is recommended to use this guide over any other that relies on outdated software (such as menuhax or rxTools). -## What can I do with Custom Firmware? +## Τι μπορείτε να κάνετε με το Custom Firmware; -+ Play all game cards and eShop games, regardless of region -+ Customize your HOME Menu with user-created [themes](https://3dsthem.es/) and [badges](https://badges.3dsthem.es/) -+ Use "ROM hacks" for games that you own -+ Take gameplay and application screenshots -+ [Backup, edit, and restore](https://gbatemp.net/threads/release-jks-savemanager-homebrew-cia-save-manager.413143/) saves for many games -+ Play games for older systems with various emulators, using RetroArch or other standalone emulators. (Works best with a New Nintendo 3DS) -+ Install homebrew titles to your system, and have them appear on your HOME Menu -+ Dump your game cards to a format you can install, and play them without needing the card -+ New 3DS only: stream live gameplay to your PC wirelessly with NTR CFW -+ Run many old Nintendo DS flash carts that were blocked long ago or never worked on Nintendo 3DS -+ Safely update to the latest system version without fear of losing access to homebrew ++ Να παίξετε όλες τις κασέτες παιχνιδιών και παιχνίδια μέσω eShop, ανεξαρτήτου περιοχής ++ Προσαρμογή του Home Menu με σχεδιασμένα από το χρήστη [themes](https://3dsthem.es/) και [badges](https://badges.3dsthem.es/) ++ Χρήση "ROM hacks" για παιχνίδια που ήδη έχετε στην κατοχή σας ++ Να κάνετε λήψη στιγμιότυπου του παιχνιδιού και εφαρμογών ++ [Δημιουργία αντιγράφων ασφαλείας, επεξεργασίας και επαναφοράς](https://gbatemp.net/threads/release-jks-savemanager-homebrew-cia-save-manager.413143/) saves για πολλά παιχνίδια ++ Να παίξετε παιχνίδια από παλαιότερα συστήματα με την χρήση διάφορων emulators, χρησιμοποιώντας το Retroarch ή άλλων μεμονωμένων emulators. (Λειτουργεί καλύτερα με το New Nintendo 3DS) ++ Εγκατάσταση homebrew τίτλων στο σύστημά σας και δυνατότητα εμφάνισης τους στο HOME Menu ++ Να εξάγετε την κασέτα παιχνιδιού σας σε μία μορφή που θα μπορείτε να εγκαταστήσετε και να παίξετε χωρίς να χρειάζεστε την κασέτα ++ Μόνο για New 3DS: μεταδώστε ζωντανά το παιχνίδι σας στον υπολογιστή σας με την χρήση του NTR CFW ++ Τρέξιμο πολλών παλιών Nintendo DS flash καρτών που είχαν μπλοκαριστεί πριν από καιρό ή δεν δούλεψαν ποτέ στο Nintendo 3DS ++ Να ενημερώσετε με ασφάλεια στην πιο πρόσφατη έκδοση του συστήματος, χωρίς τον φόβο απώλειας πρόσβασης στο homebrew -## What do I need to know before starting? +## Τι πρέπει να γνωρίζετε πριν ξεκινήσετε; -+ **Before beginning the guide, you must know the risks of 3DS hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.** ++ **Προτού ξεκινήσετε τον οδηγό, θα πρέπει να ξέρετε τους κινδύνους πίσω από το hacking του 3DS: ΚΑΘΕ φορά που τροποποιείτε το σύστημά σας, υπάρχει πάντα η πιθανότητα ΟΛΟΣΧΕΡΗΣ ΑΧΡΗΣΤΕΥΣΗΣ ΤΗΣ ΣΥΣΚΕΥΗΣ ΣΑΣ. Αυτό συμβαίνει σπάνια, όμως υπάρχει ακόμα η πιθανότητα γι΄αυτό βεβαιωθείτε ότι ακολουθείτε πιστά ΟΛΕΣ τις οδηγίες ΑΚΡΙΒΩΣ.** + If you have already hacked your 3DS before to get an EmuNAND setup, and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, you should follow all instructions and restore your existing EmuNAND when prompted once you reach [Installing arm9loaderhax](installing-arm9loaderhax). -+ This guide will work on New 3DS, Old 3DS, and 2DS in all regions on firmware 11.2.0 or below *(except CHN / TWN)*. -+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved). -+ **Keep the device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!** -+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with the device will be MBR by default). -+ If you need to format a brand new SD card, you can use [`guiformat`](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K. ++ Ο οδηγός αυτός θα λειτουργήσει στο New 3DS, Old 3DS και 2DS σε όλες τις περιοχές με firmware από 11.2.0 και κάτω *(εκτός CHN / TWN)*. ++ Εάν όλα πάνε σύμφωνα με το σχέδιο, δεν θα χάσετε τα δεδομένα σας και θα καταλήξετε με όλα όσα ξεκινήσατε (παιχνίδια, NNID, saves, κλπ. θα διατηρηθούν). ++ **Να έχετε την συσκευή σας συνεχώς στη φόρτιση καθ' όλη τη διάρκεια της διαδικασίας αυτής προς αποφυγή απώλειας δεδομένων και μιας απροσδόκητης απενεργοποίησης της συσκευής!** ++ Η κάρτα SD θα πρέπει να είναι [MBR, όχι GPT](http://www.howtogeek.com/245610/) (η κάρτα SD που περιλαμβάνεται στη συσκευή είναι MBR από προεπιλογή). ++ Εάν χρειαστεί να διαμορφώσετε μια καινούργια κάρτα SD, μπορείτε να χρησιμοποιήσετε το [`guiformat`](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) και να ορίσετε το Μέγεθος Μονάδας Εκχώρησης στα 32K. + The 2DS is essentially identical to the Old 3DS in terms of software, and that any steps which say "Old 3DS" also apply to 2DS. \ No newline at end of file diff --git a/_pages/el_GR/Homebrew-Launcher-(Soundhax).txt b/_pages/el_GR/Homebrew-Launcher-(Soundhax).txt index 5cf2df9f9..e6bd49806 100644 --- a/_pages/el_GR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/el_GR/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ To Ηomebrew Launcher έχει πολλές διαφορετικές μεθόδ + Εάν παγώσει, επιβάλλετε το κλείσιμο της κονσόλας κρατώντας πατημένο το κουμπί ενεργοποίησης και δοκιμάστε ξανά 8. Η κονσόλα σας θα πρέπει να έχει φορτώσει το Homebrew Launcher +___ + Συνέχεια στο [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Installing-arm9loaderhax.txt b/_pages/el_GR/Installing-arm9loaderhax.txt index b6843f4bc..75f462fbf 100644 --- a/_pages/el_GR/Installing-arm9loaderhax.txt +++ b/_pages/el_GR/Installing-arm9loaderhax.txt @@ -1,57 +1,57 @@ --- -title: "Installing arm9loaderhax" # -lang: en -permalink: /installing-arm9loaderhax.html +title: "Εγκατάσταση arm9loaderhax" # +lang: el +permalink: /el_GR/installing-arm9loaderhax.html --- -The final Step of this guide is to install arm9loaderhax and setup Luma3DS to run just milliseconds into the boot. This is accomplished by using SafeA9LHInstaller by [AuroraWright](https://github.com/AuroraWright/). +Το τελευταία βήμα αυτού του οδηγού είναι η εγκατάσταση του arm9loaderhax και η ρύθμιση του Luma3DS έτσι ώστε να εκκινείται χιλιοστά του δευτερολέπτου κατά την εκκίνηση της συσκευής. Αυτό επιτυγχάνεται χρησιμοποιώντας το SafeA9LHInstaller του χρήστη [AuroraWright](https://github.com/AuroraWright/). {: .notice} -This will install [AuroraWright's Fork](https://github.com/AuroraWright/arm9loaderhax) of arm9loaderhax. +Τα παρακάτω βήματα θα εγκαταστήσουν το [Fork του χρήστη AuroraWright](https://github.com/AuroraWright/arm9loaderhax) του arm9loaderhax. {: .notice--info} -We will also setup the ability to launch payloads from arm9loaderhax, giving us the ability to unbrick our SysNAND from situations that would normally brick us by restoring from backup. +Θα ετοιμάσουμε της ικανότητα να εκκινήσουμε payloads από το arm9loaderhax, επιτρέποντάς μας να επισκευάσουμε τη SysNAND σε περίπτωση που αχρηστεύσουμε την συσκευή μας. {: .notice--info} -**You cannot use another console's OTP or you will brick GUARANTEED.** +**Δεν μπορείτε να χρησιμοποιήσετε το OTP μιας άλλης συσκευής, αλλιώς είναι ΕΓΓΥΗΜΕΝΟ πως θα αχρηστεύσετε την συσκευή σας.** {: .notice--danger} -#### Overview of steps +#### Επισκόπηση των βημάτων -In this section, we will go through the process that all the other steps have led up to: actually installing arm9loaderhax. +Σε αυτήν την ενότητα θα πραγματοποιήσουμε αυτό στο οποίο μας οδήγησαν όλα τα προηγούμενα βήματα: στην εγκατάσταση του arm9loaderhax. -This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install. +Αυτό είναι το σχεδόν καλύτερο δυνατό είδος exploit καθώς εγκαθίσταται μόνιμα στα διαμερίσματα της NAND firm και εκτελείται πριν φορτώσει η πλειοψηφία του Λειτουργικού Συστήματος, επιτρέποντας όχι μόνο να δουλεύει σε *όλες* τις εκδόσεις στις οποίες είναι εγκατεστημένο, αλλά να προστατεύει επίσης τον εαυτό του και να επανέρχεται απ' όλες τις καταστάσεις οι οποίες θα καθιστούσαν άχρηστο ένα 3DS χωρίς A9LH, όπως ένα μη-λειτουργικό home menu ή μια κακή εγκατάσταση τίτλου. -The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads using the Luma3DS chainloader. +Το αρχείο `arm9loaderhax.bin` εκκινείται από το arm9loaderhax έπειτα από το φόρτωμά του στη NAND, και μπορεί να είναι οποιοδήποτε έγκυρο arm9 payload. Αυτό το αρχείο μπορεί να αντικατασταθεί ανά πάσα στιγμή, αν και το Luma3DS επιτρέπει την εκκίνηση άλλων amr9 payloads χρησιμοποιώντας το Luma3DS chainloader. -In this case, we use Luma3DS by [AuroraWright](https://github.com/AuroraWright/) to boot a patched SysNAND directly, allowing us to completely bypass the need for any kind of EmuNAND, vastly simplifying the usage of a hacked 3DS in addition to saving SD card space. +Σε αυτήν την περίπτωση, θα χρησιμοποιήσουμε το Luma3DS του χρήστη [AuroraWright](https://github.com/AuroraWright/) ώστε να εκκινήσουμε απευθείας μια επεξεργασμένη έκδοση της SysNAND, που μας επιτρέπει να παρακάμψουμε την ανάγκη για μια EmuNAND, απλοποιώντας έτσι την χρήση ενός χακαρισμένου 3DS και απελευθερώνοντας χώρο στην κάρτα SD. -Once arm9loaderhax is installed and Luma3DS is setup with the correct options, we then restore our previous backup. +Μόλις εγκαταστήσουμε το arm9loaderhax και ρυθμίσουμε το Luma3DS με τις κατάλληλες ρυθμίσεις, θα επαναφέρουμε τα αντίγραφα ασφαλείας που φτιάξαμε νωρίτερα. -During this process, we also setup programs such as the following: +Ταυτόχρονα, θα εγκαταστήσουμε προγράμματα όπως τα παρακάτω: -+ **FBI** *(installs CIA formatted games and applications)* -+ **Luma3DS Updater** *(updates your CFW installation easily)* -+ **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)* ++ **FBI** *(Εγκαθιστά εφαρμογές και παιχνίδια που έχουν την μορφή CIA)* ++ **Luma3DS Updater** *(ενημερώνει εύκολα την εγκατάσταση του CFW)* ++ **Hourglass9** *(Εργαλείο πολλών χρήσεων το οποίο μπορεί να πραγματοποιήσει λειτουργίες της NAND και των κασετών)* -#### What you need +#### Τι χρειάζεστε -* - [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`fbi-2.4.2-injectable.zip`](magnet:?xt=urn:btih:f978b4cf5eda72823240b9c649f3fd2940a9f525&dn=fbi-2.4.2-injectable.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* The latest fork of [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* -* The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* -* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* -* The latest release of [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest) -* The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) -* The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) -* The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest) -* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* - [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`fbi-2.4.2-injectable.zip`](magnet:?xt=urn:btih:f978b4cf5eda72823240b9c649f3fd2940a9f525&dn=fbi-2.4.2-injectable.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +*Το τελευταίο fork του [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *(το αρχείο `.7z`)* +* Την τελευταία έκδοση του [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(το αρχείο `.7z`)* +* Την τελευταία έκδοση του [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)* +* Την τελευταία έκδοση του [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest) +* Την τελευταία έκδοση του [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) +* Την τελευταία έκδοση του [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest) +* Την τελευταία έκδοση του [DspDump](https://github.com/Cruel/DspDump/releases/latest) +* Την τελευταία έκδοση του [FBI](https://github.com/Steveice10/FBI/releases/latest) +* Το Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) -#### Instructions +#### Οδηγίες -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία {% capture notice-5 %} **Ensure you are using an SD card that is not corrupted!** @@ -63,119 +63,122 @@ During this process, we also setup programs such as the following:
{{ notice-5 | markdownify }}
-1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system** -2. Create a folder named `cias` on the root of your SD card if it does not already exist -3. Delete the `3ds` folder from the root of your SD card if it exists -5. Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card - + This will include a brand new `3ds` folder to replace the one you just deleted -6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card -7. Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card -8. Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card -9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card -10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card -11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card -12. Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files -13. Create a folder named `luma` on the root of your SD card -14. Create a folder named `payloads` in the `luma` folder on your SD card -15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card -18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card -19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card +1. ** Εάν υπάρχει φάκελος με το όνομα `/files9/` στην κάρτα SD, αντιγράψτε τον σε μία ασφαλή τοποθεσία στον υπολογιστή σας και δημιουργήστε αρκετά αντίγραφα ασφαλείας (όπως στο σύννεφο)· τα περιεχόμενά του μπορεί να σας σώσουν από την απώλεια των δεδομένων σας σε περίπτωση που αχρηστεύσετε το σύστημά σας** +2. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη +3. Εάν υπάρχει, διαγράψτε το φάκελο `3ds` από τη ρίζα της κάρτας SD +5. Αντιγράψτε _τα περιεχόμενα_του φακέλου `starter`, που βρίσκονται στο `starter.zip`, στη ρίζα της κάρτας SD + + Αυτό θα περιλαμβάνει και έναν καινούργιο φάκελο `3ds` που αντικαθιστά αυτόν που μόλις διαγράψατε +6. Αντιγράψτε _τα περιεχόμενα του_ SafeA9LHInstaller `.7z` στην ρίζα της κάρτας SD +7. Αντιγράψτε το φάκελο `a9lh` από το data_input `.zip` στη ρίζα της κάρτας SD +8. Αντιγράψτε _τα περιεχόμενα_ του arm9loaderhax release `.7z` στο φάκελο `a9lh` της κάρτας SD +9. Αντιγράψτε το αρχείο `hblauncher_loader.cia` από το hblauncher_loader `.zip` στον φάκελο `/cias/` της κάρτας SD +10. Αντιγράψτε το αρχείο `lumaupdater.cia` από το Luma3DS Updater `.zip` στον φάκελο `/cias/` της κάρτας SD +11. Αντιγράψτε το αρχείο `FBI.cia` από το FBI `.zip` στον φάκελο `/cias/` της κάρτας SD +12. Αντιγράψτε το `arm9loaderhax.bin` από το Luma3DS `.7z` στη ρίζα της κάρτας SD, αντικαθιστώντας υπάρχοντα αρχεία +13. Δημιουργήστε έναν φάκελο με το όνομα `luma` στην ρίζα της κάρτας SD +14. Δημιουργήστε έναν φάκελο με το όνομα `payloads` στον φάκελο `luma` της κάρτας SD +15. Αντιγράψτε το `Hourglass9.bin` από το Hourglass9 `.zip` στον φάκελο `/luma/payloads/` της κάρτας SD και μετονομάστε το `Hourglass9.bin` σε `start_Hourglass9.bin` +17. Αντιγράψτε το αρχείο `aeskeydb.bin` στον φάκελο `/files9/` της κάρτας SD +18. Αντιγράψτε το αρχείο `DspDump.3dsx` στον φάκελο `/3ds/` της κάρτας SD +19. Αντιγράψτε _τα περιεχόμενα_ του `fbi-2.4.2-injectable.zip` στον φάκελο `/files9/` της κάρτας SD -##### Section II - Installing arm9loaderhax +##### Ενότητα II - Εγκατάσταση του arm9loaderhax -1. Reinsert your SD card into your 3DS -2. You should be on 2.1.0 -3. Go to `http://2xrsa.3ds.guide` on your 3DS - + If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the NAND region you installed with 2.1.0 ctrtransfer - + If you get another error, [follow this troubleshooting guide](troubleshooting#ts_browser) - + If you get a glitched screen, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh_screen) - + If you are on a 2DS or New 3DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up -4. Press (Select) to Full Install -5. The installer will now install arm9loaderhax on your device (this is very fast) -6. Shut down your console by pressing any button -7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS +1. Επανατοποθετήστε την κάρτα SD στο 3DS +2. Θα πρέπει να βρίσκεστε στην έκδοση 2.1.0 +3. Μεταβείτε στο `http://2xrsa.3ds.guide` στο 3DS σας + + Εάν αντιμετωπίζετε το σφάλμα "This service is not available in your region", χρησιμοποιήστε το System Settings ώστε να ορίσετε την χώρα της συσκευής σας έτσι ώστε να ταιριάζει με την περιοχή της NAND που εγκαταστήσατε νωρίτερα, κατά την διάρκεια του ctrtransfer 2.1.0 + + Εάν αντιμετωπίζετε κάποιο άλλο σφάλμα, [ακολουθήστε αυτόν τον οδηγό αντιμετώπισης σφαλμάτων](troubleshooting#ts_browser) + + Εάν αντιμετωπίζετε μια κολλημένη οθόνη, [ακολουθήστε αυτόν τον οδηγό αντιμετώπισης σφαλμάτων](troubleshooting#ts_safe_a9lh_screen) + + Εάν βρίσκεστε στο 2DS ή στο New 3DS και έχετε απενεργοποιημένη την Ασύρματη Σύνδεση, μπορείτε να την επανενεργοποιήσετε αφαιρώντας την μπαταρία και αποσυνδέοντας τον φορτιστή για μερικά δευτερόλεπτα. Έπειτα ενεργοποιήστε ξανά την συσκευή +4. Πατήστε (Select) για να πραγματοποιήσετε μια πλήρη εγκατάσταση +5. Το πρόγραμμα εγκατάστασης θα εγκαταστήσει τώρα το arm9loaderhax στη συσκευή σας (αυτό γίνεται πολύ γρήγορα) +6. Απενεργοποιήστε την κονσόλα σας πατώντας οποιοδήποτε κουμπί +7. Αντιγράψτε το `otp.bin` της κονσόλας σας από το φάκελο `/a9lh/` της κάρτα SD σε μία ασφαλή τοποθεσία στον υπολογιστή σας και δημιουργήστε αντίγραφα ασφαλείας σε πολλές τοποθεσίες (όπως μία online αποθήκευση αρχείων), και επανατοποθετήστε την κάρτα SD στο 3DS -##### Section III - Configuring Luma3DS +##### Ενότητα III - Ρύθμιση του Luma3DS -1. Boot your device while holding (Select) to enter the Luma3DS configuration menu - + Make sure to start holding the button before pressing power +1. Εκκινήστε την συσκευή σας κρατώντας πατημένο το (Select) και εισέλθετε στο μενού ρυθμίσεων του Luma3DS + + Βεβαιωθείτε πως κρατάτε πατημένο το κουμπί πριν ενεργοποιήσετε την κονσόλα + If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_a9lh) + If you boot to SafeA9LHInstaller, [follow this troubleshooting guide](troubleshooting#ts_safe_a9lh) -2. Use the (A) button and the D-Pad to turn on the following: +2. Χρησιμοποιώντας το κουμπί (A) και το D-Pad ενεργοποιήστε τα παρακάτω: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. If you are using a **New 3DS**, you can *also* enable the following: +3. Εάν χρησιμοποιείτε το **New 3DS**, μπορείτε *επίσης* να ενεργοποιήστε και το παρακάτω: + **"New 3DS CPU" to "Clock+L2(x)"** - + This will increase the framerate of many games, but may cause instability in others - + If some games do not work properly, disable this option and try again -4. Press (Start) to save and reboot - + If you get a black screen, just continue to the next section - + If you get a "Failed to mount CTRNAND" error, just continue to the next section + + Αυτό θα αυξήσει την επίδοση σε πολλά παιχνίδια, αλλά μπορεί να προκαλέσει αστάθεια σε άλλα + + Εάν μερικά παιχνίδια δεν δουλεύουν όπως πρέπει, απενεργοποιήστε αυτήν την ρύθμιση και ξαναδοκιμάστε + + This breaks the Homebrew Launcher on 11.3! +4. Πατήστε (Start) για να αποθηκεύσετε τις αλλαγές σας και να επανεκκινήσετε + + Εάν αντιμετωπίζετε μια μαύρη οθόνη, απλά προχωρήστε στην επόμενη ενότητα + + Εάν αντιμετωπίζετε το σφάλμα "Failed to mount CTRNAND", απλά προχωρήστε στην επόμενη ενότητα -##### Section IV - Restoring the System +##### Ενότητα IV - Επαναφορά του Συστήματος If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) instead of doing the first four steps in this section. {: .notice--info} -1. Boot your device while holding (Start) to enter Hourglass9 -2. Go to "SysNAND Backup/Restore" -3. Go to "SysNAND Restore (keep a9lh)" -4. Input the key combo given, then select the `NANDmin.bin` image when prompted by pressing (A) -5. Press (Start) to reboot - + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) -6. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware: - + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` - + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) - + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card - + Delete both of these files after updating your 3DS -7. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update" - + Updates while using A9LH + Luma (what you have) are safe, stop asking about it - + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup. - + If this gives you an error, set your DNS settings to "auto" - + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer) +1. Εκκινήστε την συσκευή σας κρατώντας πατημένο το (Start) και εισέλθετε στο Hourglass9 +2. Πηγαίνετε στην επιλογή "SysNAND Backup/Restore" +3. Μεταβείτε στο "SysNAND Restore (keep a9lh)" +4. Εισάγετε το συνδυασμό πλήκτρων που σας ζητείται και επιλέξτε την `NANDmin.bin` εικόνα όταν σας ζητηθεί, πιέζοντας το (A) +5. Πατήστε (Start) για να επανεκκινήσετε + + Εάν αντιμετωπίζετε μια μαύρη οθόνη [ακολουθήστε το 9.2.0 ctrtransfer](9.2.0-ctrtransfer) +6. Εάν τα αντίγραφα ασφαλείας ήταν από την έκδοση 3.0.0 έως 4.5.0, η κονσόλα σας δεν θα εκκινήσει μέχρι να κατεβάσετε χειροκίνητα το απαιτούμενο λογισμικό: + + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin` + + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + + Αντιγράψτε τα αρχεία `firmware.bin` και `cetk` στον φάκελο `/luma/` της κάρτας SD + Διαγράψτε και τα δύο αρχεία μετά από την ενημέρωση του 3DS +7. Ενημερώστε το 3DS σας πηγαίνοντας στο System Settings, έπειτα στην επιλογή "Other Settings" και μετά πηγαίνοντας μέχρι το τέλος προς τα δεξιά και βρίσκοντας την επιλογή "System Update" + + Οι ενημερώσεις συστήματος ενώ χρησιμοποιείτε το A9LH + Luma (ό, τι έχετε) είναι ασφαλείς, σταματήστε να ρωτάτε + + Η προειδοποίηση σχετικά με το να μην ενημερώσετε ποτέ ένα New 3DS από την έκδοση 2.1.0 δεν ισχύει έπειτα από την επαναφορά των αντιγράφων ασφαλείας της NAND. + + Εάν αντιμετωπίζετε οποιοδήποτε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto" + + Εάν εξακολουθείτε να λαμβάνετε ένα σφάλμα και η NAND σας είναι σε έκδοση μικρότερη της 9.2.0, [ακολουθήστε το ctrtransfer 9.2.0](9.2.0-ctrtransfer) ##### Section V - Injecting FBI -1. Boot your device while holding (Start) to enter Hourglass9 +1. Εκκινήστε την συσκευή σας κρατώντας πατημένο το (Start) και εισέλθετε στο Hourglass9 2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)** -3. Press (B), then select the "Health&Safety Inject" option -4. Select the FBI injectable `.app` for your region +3. Πατήστε (B) και έπειτα επιλέξτε το "Health&Safety Inject" +4. Επιλέξτε το αρχείο του FBI `.app` για την περιοχή σας 5. Press (A) and confirm to inject -6. Press (Start) to reboot -7. If you still launch to the stock Health & Safety app and have downgraded with Gateway in the past, [follow this troubleshooting guide](troubleshooting#gw_fbi) +6. Πατήστε (Start) για να επανεκκινήσετε +7. Εάν εξακολουθείτε να εκκινείτε την κανονική εφαρμογή Health & Safety, και έχετε υποβαθμίσει την κονσόλα σας χρησιμοποιώντας μια Gateway στο παρελθόν, [ακολουθήστε αυτόν τον οδηγό επίλυσης προβλημάτων](troubleshooting#gw_fbi) -##### Section VI - Finalizing setup +##### Ενότητα VI - Ολοκλήρωση της εγκατάστασης -1. Open Health and Safety (which is now FBI) -2. Select "SD" -3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed - + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -19. Use the (A) button and the D-Pad to turn on the following: +1. Ανοίξτε την εφαρμογή Health and Safety (η οποία είναι τώρα το FBI) +2. Επιλέξτε "SD" +3. Επιλέξτε "cias" +4. Επιλέξτε "\" +5. Επιλέξτε την επιλογή "Install all CIAs" και πατήστε (A) για επιβεβαίωση +6. Επιστρέψτε στην λίστα της κάρτας SD πατώντας (B) +7. Μεταβείτε στο `arm9loaderhax.bin` και έπειτα πατήστε (A) και επιλέξτε την επιλογή "Copy" +8. Επιστρέψτε στο κύριο μενού του FBI πατώντας το (B) +9. Επιλέξτε "CTR NAND" +10. Επιλέξτε "\" +11. Επιλέξτε "Paste" και πατήστε (A) για επιβεβαίωση +12. Πραγματοποιήστε έξοδο πατώντας το home button +13. Εκκινήστε το Homebrew Launcher από το Home Menu +14. Επιλέξτε "DSP Dump" +15. Πατήστε (Start), όταν σας ζητηθεί, για να πραγματοποιήσετε έξοδο +16. Πατήστε (Start) για να ανοίξετε το μενού εξόδου του Homebrew Launcher +17. Πατήστε (A) κρατώντας πατημένο το (Start) για να κάνετε επανεκκίνηση στο Hourglass9 +18. Πηγαίνετε στην επιλογή "SysNAND Backup/Restore", και έπειτα επιλέξτε "Health&Safety Inject" +19. Επιλέξτε `hs.app` (το αρχικό που δεν περιέχει το FBI), και έπειτα πατήστε (A) και επιβεβαιώστε την εισαγωγή +20. Πατήστε το (Select) στην αρχική οθόνη για να αφαιρέσετε την κάρτα SD +21. Πατήστε (Start) για να επανεκκινήσετε χωρίς την κάρτα SD + + Εκκινώντας την συσκευή τουλάχιστον μία φορά χωρίς την κάρτα SD, θα σας επιτρέψει να ρυθμίσετε το CTRNAND με βάση την εγκατάσταση του Luma3DS +22. Χρησιμοποιώντας το κουμπί (A) και το D-Pad ενεργοποιήστε τα παρακάτω: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. Εάν χρησιμοποιείτε το **New 3DS**, μπορείτε *επίσης* να ενεργοποιήστε και το παρακάτω: + **"New 3DS CPU" to "Clock+L2(x)"** - + This will increase the framerate of many games, but may cause instability in others - + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + Αυτό θα αυξήσει την επίδοση σε πολλά παιχνίδια, αλλά μπορεί να προκαλέσει αστάθεια σε άλλα + + Εάν μερικά παιχνίδια δεν δουλεύουν όπως πρέπει, απενεργοποιήστε αυτήν την ρύθμιση και ξαναδοκιμάστε + + This breaks the Homebrew Launcher on 11.3! +24. Επανατοποθετήστε την κάρτα SD, και έπειτα πατήστε (Start) για να αποθηκεύσετε και να επανεκκινήσετε! ___ @@ -183,35 +186,35 @@ If DSi / DS functionality has broken (such as DS carts or DSiWare no longer work {: .notice--warning} {% capture notice-10 %} -You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A). -This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files. -This will only update the Luma3DS files on the SD Card. If you boot the device without an SD card, it will use the version you placed in CTR NAND. +Μπορείτε να ενημερώσετε το Luma3DS, χρησιμοποιώντας το Luma3DS Updater, απλώς ανοίγοντάς το και πατώντας το (A). +Δεν είναι το ίδιο με την Ενημέρωση Συστήματος· το μόνο που κάνει είναι να κατεβάσει και να αποσυμπιέσει τα τελευταία αρχεία του Luma3DS. +Θα ενημερώσει μόνο τα αρχεία του Luma3DS που βρίσκονται στην κάρτα SD. Αν εκκινήσετε την συσκευή χωρίς την κάρτα SD, θα χρησιμοποιηθεί η έκδοση που υπάρχει στη CTR NAND. {% endcapture %}
{{ notice-10 | markdownify }}
{% capture notice-6 %} -You will now boot a Custom Firmware based SysNAND by default. -You can now hold (Select) on boot to launch the Luma3DS configuration menu. -You can now hold (Start) on boot to launch Hourglass9. +Τώρα θα εκκινήσετε σε Custom Firmware βασισμένο στην SysNAND. +Μπορείτε να πατήσετε (Select) κατά την εκκίνηση ώστε να ανοίξετε τις ρυθμίσεις του Luma3DS. +Τώρα μπορείτε να κρατάτε πατημένο το (Start) κατά την εκκίνηση για να εισέλθετε στο Hourglass9. {% endcapture %}
{{ notice-6 | markdownify }}
-You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page. +Μπορείτε να ενημερώσετε το arm9loaderhax ακολουθώντας τις οδηγίες της σελίδας [Ενημέρωση του A9LH](updating-a9lh). {: .notice--info} To use [NTR CFW](https://github.com/44670/BootNTR/), get `ntr.bin` from the appropriate `.zip` on [this](https://github.com/44670/BootNTR/releases) page and copy it to the root of your SD card, then install `BootNTR.cia` from [this](https://github.com/astronautlevel2/BootNTR/releases/latest) page. {: .notice--info} -Keep your `NANDmin.bin` file, it can be restored by Hourglass9 to save you from a brick in the future. +Κρατήστε το αρχείο `NANDmin.bin`, καθώς μπορεί να επαναφερθεί από το Hourglass9 και να σας σώσει από μία αχρήστευση της συσκευής σας στο μέλλον. {: .notice--info} -You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location. +Μπορείτε να διαγράψετε τα αντίγραφα ασφαλείας της NAND από τον φάκελο `/files9/` εφόσον έχετε ακόμα τα αντίγραφα ασφαλείας της σε μια ασφαλή τοποθεσία. {: .notice--info} {% capture notice-7 %} -**You can remove any extra files and folders from the root of the SD card that are *not* in the following list:** +**Μπορείτε να διαγράψετε τα επιπλέον αρχεία και φακέλους από την ρίζα της κάρτας SD εφόσον *δεν* βρίσκονται στην παρακάτω λίστα:** + 3ds + files9 @@ -225,11 +228,11 @@ You can remove your NAND backups from `/files9/` as long as you still have them
{{ notice-7 | markdownify }}
-For information on changing your device to another region, check out the [Region Changing](region-changing) page. +Για πληροφορίες σχετικά με την αλλαγή της περιοχής της συσκευής σας, επισκεφθείτε την σελίδα [Αλλαγή Περιοχής](region-changing). {: .notice--success} -For information on keeping your A9LH installation up to date, check out the [Updating A9LH](updating-a9lh) page. +Για πληροφορίες σχετικά με την ενημέρωση του A9LH, επισκεφθείτε την σελίδα [Ενημέρωση του A9LH](updating-a9lh). {: .notice--success} -For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). +Για πληροφορίες σχετικά με την χρήση του Luma3DS, επισκεφθείτε [το wiki του](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage). {: .notice--success} \ No newline at end of file diff --git a/_pages/el_GR/Move-EmuNAND.txt b/_pages/el_GR/Move-EmuNAND.txt index 89e2c1cfb..a80fe69e9 100644 --- a/_pages/el_GR/Move-EmuNAND.txt +++ b/_pages/el_GR/Move-EmuNAND.txt @@ -1,51 +1,53 @@ --- -title: "Move EmuNAND" # -lang: en -permalink: /move-emunand.html +title: "Μετακίνηση του EmuNAND" # +lang: el +permalink: /el_GR/move-emunand.html --- -This is add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Note that the terms EmuNAND and RedNAND refer to slightly different implementations of [the same concept](http://3dbrew.org/wiki/NAND_Redirection). +Αυτή είναι μια επιπρόσθετη ενότητα για την μετακίνηση μιας προηγούμενης EmuNAND στο νέο CFW της SysNAND και για την μετέπειτα αφαίρεση του διαμερίσματος της EmuNAND. Σημειώστε ότι οι όροι EmuNAND και RedNAND αναφέρονται σε ελαφρώς διαφορετικές υλοποιήσεις [της ίδιας έννοιας](http://3dbrew.org/wiki/NAND_Redirection). {: .notice--info} -You will LOSE your GBA VC and DSiWare saves! +Θα ΧΑΣΕΤΕ τα saves των τίτλων DSiWARE και VC του GBA! {: .notice--danger} -**You MUST have already installed arm9loaderhax + Luma3DS to use this.** +**Πρέπει να έχετε εγκατεστημένα το arm9loaderhax + Luma3DS για να χρησιμοποιήσετε τον παρακάτω οδηγό.** {: .notice--danger} -#### What you need +#### Τι χρειάζεστε -* An existing EmuNAND -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* Μια υπάρχουσα EmuNAND +* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -#### Instructions +#### Οδηγίες -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` -2. Reinsert your SD card into your 3DS -3. Open Hourglass9 from arm9loaderhax by holding (Start) on boot -5. Go to "EmuNAND Backup/Restore", then select the "EmuNAND Backup" option to backup your EmuNAND to `NANDmin_emu.bin` -6. Press (B) to get back to the main menu -7. Go to "SysNAND Backup/Restore", then select the "SysNAND Restore (keep a9lh)" option to restore your SysNAND from `NANDmin_emu.bin` -8. Press (Select) to eject your SD card -9. Put your SD card in your computer, then copy `NANDmin_emu.bin` and `NANDmin_emu.bin.sha` from the `/files9/` folder on your SD card to a safe location - + Make backups in multiple locations - + This backup will save you from a brick if anything goes wrong in the future -9. Delete `NANDmin_emu.bin` from the `/files9/` folder on your SD card after copying it -10. **Backup every file on your SD card to a folder on your computer; all files will be deleted in the following steps** -11. Reinsert your SD card into your 3DS +1. Αντιγράψτε το `GodMode9.bin` από το GodMode9 `.zip` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `GodMode9.bin` του φακέλου `/luma/payloads/` σε `up_GodMode9.bin` +2. Επανατοποθετήστε την κάρτα SD στο 3DS +3. Ανοίξτε το Hourglass9 από το arm9loaderhax κρατώντας πατημένο το (Start) κατά την εκκίνηση +4. Πηγαίνετε στην επιλογή "EmuNAND Backup/Restore", έπειτα επιλέξτε "EmuNAND Backup" ώστε να δημιουργήσετε αντίγραφα ασφαλείας της EmuNAND στο `NANDmin_emu.bin` +5. Πατήστε (B) για να επιστρέψετε στο αρχικό μενού +6. Πηγαίνετε στην επιλογή "SysNAND Backup/Restore", έπειτα επιλέξτε "SysNAND Restore (keep a9lh)" ώστε να επαναφέρετε την SysNAND από το `NANDmin_emu.bin` +7. Πατήστε (Select) για να αφαιρέσετε την κάρτα SD +8. Τοποθετήστε την κάρτα SD στον υπολογιστή σας, και έπειτα αντιγράψτε τα αρχεία `NANDmin_emu.bin` και `NANDmin_emu.bin.sha` από τον φάκελο `/files9/` της κάρτας SD σε κάποια ασφαλής τοποθεσία + + Δημιουργήστε αντίγραφα ασφαλείας σε πολλαπλές τοποθεσίες + + Αυτά τα αντίγραφα ασφαλείας θα σας σώσουν από την αχρήστευση της συσκευής σε περίπτωση που κάτι πάει στραβά +9. Διαγράψτε το αρχείο `NANDmin_emu.bin` από τον φάκελο `/files9/` της κάρτας SD, αφού το αντιγράψετε +10. **Δημιουργήστε ένα αντίγραφο ασφαλείας όλων των αρχείων της κάρτας SD σε έναν φάκελο στον υπολογιστή σας. Θα διαγραφούν τα πάντα από την κάρτα SD στα επόμενα βήματα** +11. Επανατοποθετήστε την κάρτα SD στο 3DS 12. Press (Start) to reboot while holding (Up) to open GodMode9 -13. Press the (Home) button to bring up the action menu -14. Select "SD format menu" -15. Press (A) to confirm -16. Select "No EmuNAND" -17. Select "Auto" -18. Enter the prompted button combination to confirm -19. Hold (R) and press (B) at the same time to eject your SD card -20. Put your SD card in your computer, then copy all your files back into it - + Ensure you replace the `arm9loaderhax.bin` file on the SD card with the one from your backup -22. Reinsert your SD card into your 3DS -23. Press (A) to remount your SD card -24. Press (Start) to reboot! -25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +13. Πατήστε το (Home) για να εμφανίσετε το μενού ενεργειών +14. Επιλέξτε "SD format menu" +15. Πατήστε (A) για επιβεβαίωση +16. Επιλέξτε "No EmuNAND" +17. Επιλέξτε "Autο" +18. Εισάγετε τον συνδυασμό πλήκτρων που θα σας δωθεί +19. Κρατήστε πατημένο το (R) και πατήστε ταυτόχρονα το (B) για να αφαιρέσετε την κάρτα SD +20. Τοποθετήστε την κάρτα SD στον υπολογιστή και αντιγράψτε όλα τα αρχεία πίσω σε αυτήν + + Βεβαιωθείτε ότι αντικαταστήσατε το αρχείο `arm9loaderhax.bin` στην κάρτα SD με αυτό του αντιγράφου ασφαλείας +21. Επανατοποθετήστε την κάρτα SD στο 3DS +22. Press (A) to remount your SD card +23. Πατήστε (Start) για να επανεκκινήσετε! +24. Εάν αντιμετωπίζετε μια μαύρη οθόνη, [ακολουθήστε αυτόν τον οδηγό αντιμετώπισης σφαλμάτων](troubleshooting#ts_sys_down) -Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file +___ + +Επιστροφή στο [Εγκατάσταση του arm9loaderhax](installing-arm9loaderhax). diff --git a/_pages/el_GR/NTR-and-Cubic-Ninja.txt b/_pages/el_GR/NTR-and-Cubic-Ninja.txt index 586084204..3ce9cc730 100644 --- a/_pages/el_GR/NTR-and-Cubic-Ninja.txt +++ b/_pages/el_GR/NTR-and-Cubic-Ninja.txt @@ -1,29 +1,29 @@ --- -title: "NTR and Cubic Ninja" # -lang: en -permalink: /ntr-and-cubic-ninja.html +title: "NTR και Cubic Ninja" # +lang: el +permalink: /el_GR/ntr-and-cubic-ninja.html --- -**NTR Cubic Ninja will work for JPN New 3DS ONLY!** +**Το NTR Cubic Ninja δουλεύει ΜΟΝΟ σε JPN New 3DS!** {: .notice--warning} -#### What you need +#### Τι χρειάζεστε * [JPN Cubic Ninja](https://www.amazon.com/dp/B004QL7M0A) -* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) -* - [`3ds-private-update-server.zip`](magnet:?xt=urn:btih:8623e580752f22940d96630ef723ce30a707b22e&dn=3ds-private-update-server.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) +* Το Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip) +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) +* - [`3ds-private-update-server.zip`](magnet:?xt=urn:btih:8623e580752f22940d96630ef723ce30a707b22e&dn=3ds-private-update-server.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) * [WAMPSERVER (PHP 5.5) 2.5](http://www.wampserver.com/en/#download-wrapper) * [`node.exe`](http://nodejs.org/dist/latest/win-x86/node.exe) -* - [`update.php`](magnet:?xt=urn:btih:cd7e59ea9744115913b561dbde15f8d68e713507&dn=update.php&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) -* The v3.2 release of [NTR CFW](https://github.com/44670/BootNTR/releases/tag/3.2) -* The latest release of - [NTR Debugger](magnet:?xt=urn:btih:66274cee542bef7745792714673bf2be4d606496&dn=NTR%20Debugger.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) -* The 9.2.0 downgrade pack `.zip` file for your device and region: - + - [New 3DS 9.2.0 - JPN](magnet:?xt=urn:btih:c8630ed31b53637b9023bd4dc1ce38362bb8ecd9&dn=9.2.0-20J%28Full%29%5Fn3DS.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=http%3A%2F%2Ftracker.kicks-ass.net%2Fannounce) +* - [`update.php`](magnet:?xt=urn:btih:cd7e59ea9744115913b561dbde15f8d68e713507&dn=update.php&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) +* Την v3.2 έκδοση του [NTR CFW](https://github.com/44670/BootNTR/releases/tag/3.2) +* Την τελευταία έκδοση του - [NTR Debugger](magnet:?xt=urn:btih:66274cee542bef7745792714673bf2be4d606496&dn=NTR%20Debugger.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce) +* Το αρχείο με το πακέτο υποβάθμισης 9.2.0 `.zip` για την κονσόλα και την περιοχή σας: + + - [New 3DS 9.2.0 - JPN](magnet:?xt=urn:btih:c8630ed31b53637b9023bd4dc1ce38362bb8ecd9&dn=9.2.0-20J%28Full%29%5Fn3DS.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=udp%3A%2F%2Ftracker.piratepublic.com%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.kicks-ass.net%3A80%2Fannounce&tr=http%3A%2F%2Ftracker.kicks-ass.net%2Fannounce) -#### Instructions +#### Οδηγίες -##### Section I - Prep Work +##### Ενότητα I - Προετοιμασία 1. Install WAMP to the default directory 2. Copy the contents of `3ds-private-update-server.zip` to `C:\wamp\www\` (overwrite existing files) @@ -62,5 +62,5 @@ permalink: /ntr-and-cubic-ninja.html ___ -Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) +Συνέχεια στο [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/el_GR/Region-Changing.txt b/_pages/el_GR/Region-Changing.txt index 91e144c62..df84fb2dd 100644 --- a/_pages/el_GR/Region-Changing.txt +++ b/_pages/el_GR/Region-Changing.txt @@ -1,126 +1,128 @@ --- -title: "Region Changing" # -lang: en -permalink: /region-changing.html +title: "Αλλαγή Περιοχής" # +lang: el +permalink: /el_GR/region-changing.html --- -This is add-on section for region changing your arm9loaderhax CFW SysNAND. This is done by installing the 9.2.0 ctrtransfer image for the region you want to switch to and modifying your SecureInfo_A file. +Αυτή είναι μια επιπρόσθετη ενότητα για την αλλαγή της περιοχής της SysNAND σας σε arm9loaderhax CFW. Αυτό επιτυγχάνεται εγκαθιστώντας την εικόνα της ctrtransfer 9.2.0 για την περιοχή στην οποία θέλετε να μεταφέρετε την συσκευή σας και έπειτα τροποποιώντας το αρχείο SecureInfo_A. {: .notice--primary} **Region changing is almost completely unnecessary since Luma3DS supports out of region games and individual [title region emulation](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).** {: .notice--info} -This process will unlink your NNID from the system, since it will no longer be compatible with it. NNID's are locked to the region of the device that created them, and cannot be transferred between regions without [a very complex and advanced process](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). +Αυτή η διαδικασία θα αποσυνδέσει το NNID σας από το σύστημα, καθώς δεν θα είναι πλέον συμβατό με αυτό. Τα NNID είναι κλειδωμένα για την περιοχή της συσκευής στην οποία δημιουργήθηκαν και δεν μπορούν να μεταφερθούν μεταξύ περιοχών χωρίς [μια πολύ περίπλοκη και προηγμένη διαδικασία](https://gist.githubusercontent.com/yifanlu/e80db121d38aceb8cca0e03cefd5853b/raw/3c4dd89869156ca0f945a2791e699acfdb32b510/gistfile1.txt). {: .notice--warning} -After this process, only **New 3DSs which have never accessed the eShop before** and **any Old 3DSs** will be able to access the eShop after creating a new NNID on their new region. Region changed New 3DSs that have already accessed the eShop on their original region cannot create a new NNID and access the eShop on their new region! +Μετά από αυτήν την διαδικασία, μόνο **τα New 3DS που δεν έχουν ξαναχρησιμοποιήσει το eShop πριν** και **οποιοδήποτε Old 3DS** θα μπορούν να αποκτήσουν πρόσβαση στο eShop μετά από την δημιουργία ενός καινούργιου NNID για την καινούργια περιοχή. New 3DS τα οποία είχαν χρησιμοποιήσει το eShop στην αρχική περιοχή της συσκευής δεν μπορούν να δημιουργήσουν καινούργιο NNID και να αποκτήσουν πρόσβαση στο eShop στην καινούργια περιοχή! {: .notice--warning} -Note that occasionally the eShop will inexplicably still not work for devices that it should work for. This is entirely to do with Nintendo's servers, and I really do not have any control over it. +Σημειώστε ότι σποραδικά το eShop δεν θα λειτουργεί, χωρίς λόγο, σε συσκευές στις οποίες θα έπρεπε. Έχει να κάνει αποκλειστικά με του διακομιστές της Nintendo και δεν μπορώ να έχω καθόλου έλεγχο, όσον αφορά αυτό το θέμα. {: .notice--warning} -Region changing using ctrtransfer (which this method uses) seems to cause reboot patches to break. The cause for this is unknown, but for now Old 3DS users will be unable to play extended memory mode games (such as Monster Hunter, Super Smash Bros, and Pokémon Sun / Moon). +Η αλλαγή της περιοχής με την χρήση της ctrtransfer (την οποία θα χρησιμοποιήσουμε) φαίνεται να προκαλεί την καταστροφή των ενημερώσεων επανεκκίνησης. Η αιτία είναι άγνωστη, αλλά προς το παρόν οι χρήστες Old 3DS δεν θα μπορούν να παίξουν παιχνίδια εκτεταμένης μνήμης (όπως το Monster Hunter, το Super Smash Bros, και το Pokémon Sun / Moon). {: .notice--warning} -**You MUST have already installed arm9loaderhax + Luma3DS to use this.** +**ΠΡΕΠΕΙ να έχετε προεγκατεστημένα το arm9loaderhax και το Luma3DS για να προχωρήσετε.** {: .notice--danger} -#### What you need +#### Τι χρειάζεστε -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -* The latest release of [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) -* The 9.2.0 ctrtransfer image for your device and the region you want to switch to - + - [New 3DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:b22d67fd02b3b0e30ac991e451db0f2d32e7beca&dn=9.2.0-20J%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [New 3DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:985d47442dc470d1b9f908256bed041c63885f60&dn=9.2.0-20U%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* Την τελευταία έκδοση του [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) +* Την εικόνα της ctrtransfer για την συσκευή και περιοχή στην οποία θέλετε να αλλάξετε + + - [New 3DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:b22d67fd02b3b0e30ac991e451db0f2d32e7beca&dn=9.2.0-20J%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [New 3DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:985d47442dc470d1b9f908256bed041c63885f60&dn=9.2.0-20U%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) ~ - + - [Old 3DS or 2DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:8d6142313971b08f92257e7fb1c1d5689e34ed78&dn=9.2.0-20E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [Old 3DS or 2DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:24ad2b85e67013ef1f91178dca7ad2e40663b9b2&dn=9.2.0-20J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [Old 3DS or 2DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1dc79a2a0babb45497961888f369423a93135e2b&dn=9.2.0-20U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - EUR - ctrtransfer](magnet:?xt=urn:btih:8d6142313971b08f92257e7fb1c1d5689e34ed78&dn=9.2.0-20E%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - JPN - ctrtransfer](magnet:?xt=urn:btih:24ad2b85e67013ef1f91178dca7ad2e40663b9b2&dn=9.2.0-20J%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [Old 3DS or 2DS 9.2.0 - USA - ctrtransfer](magnet:?xt=urn:btih:1dc79a2a0babb45497961888f369423a93135e2b&dn=9.2.0-20U%5Fctrtransfer%5Fo3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -#### Instructions +#### Οδηγίες -**Some consoles have a `SecureInfo_B` instead of `SecureInfo_A`; this is fine and you should use `SecureInfo_B` for the relevant steps.** +**Ορισμένες κονσόλες έχουν το αρχείο `SecureInfo_B` αντί για το `SecureInfo_A`· δεν υπάρχει πρόβλημα και θα πρέπει να χρησιμοποιήσετε το `SecureInfo_B` για τα σχετικά βήματα.** {: .notice--info} -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin` -2. Copy `Decrypt9WIP.bin` to the `/luma/payloads/` folder on your SD card and rename `Decrypt9WIP.bin` to `x_Decrypt9WIP.bin` -3. Copy the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the ctrtransfer `.zip` to the `/files9/` folder on your SD card -4. Reinsert your SD card into your 3DS +1. Αντιγράψτε το `GodMode9.bin` από το GodMode9 `.zip` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `GodMode9.bin` σε `up_GodMode9.bin` +2. Αντιγράψτε το `Decrypt9WIP.bin` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `Decrypt9WIP.bin` σε `x_Decrypt9WIP.bin` +3. Αντιγράψτε την εικόνα της ctrtransfer 9.2.0 `.bin` και `.bin.sha` από το ctrtransfer `.zip` στον φάκελο `/files9/` στην κάρτα SD +4. Επανατοποθετήστε την κάρτα SD μέσα στο 3DS -##### Section II - Backup tickets and config save +##### Ενότητα II - Αντίγραφα ασφαλείας των tickets και του config save -1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -3. Go to "Ticket/Titlekey Options", then select "Ticket Dump (SysNAND)" -4. Press (Select) to eject your SD card, then put it in your computer -5. Delete all `.tik` files in the `/files9/` folder that **do not** start with "00-" -6. Leave all the `.tik` files that do start with "00-" in the folder -7. Reinsert your SD card into your 3DS, then press (B) to go back to the Main Menu -8. Go to "SysNAND Options", then "System Save Dump", then select "Dump configsave.bin" +1. Πατήστε (Start) και έπειτα κρατήστε πατημένο το (X) για να εκκινήσετε στο Decrypt9 του arm9loaderhax +3. Μεταβείτε στο "Ticket/Titlekey Options" και έπειτα επιλέξτε "Ticket Dump (SysNAND)" +4. Πατήστε (Select) για να αφαιρέσετε την κάρτα SD και έπειτα τοποθετήστε την στον υπολογιστή σας +5. Διαγράψτε όλα τα αρχεία `.tik` στον φάκελο `/files9/` τα οποία **δεν** αρχίζουν με "00-" +6. Αφήστε όλα τα αρχεία `.tik` που αρχίζουν με "00-" μέσα στον φάκελο +7. Επανατοποθετήστε την κάρτα SD στο 3DS και έπειτα πατήστε (B) για να επιστρέψετε στο Αρχικό Μενού +8. Μεταβείτε στο "SysNAND Options", έπειτα στο "System Save Dump" και μετά επιλέξτε "Dump configsave.bin" -##### Section III - ctrtransfer +##### Ενότητα III - ctrtransfer 1. Go to "SysNAND Options", then "CTRNAND Transfer", then "Auto CTRNAND Transfer" -2. Select the 9.2.0 ctrtransfer image when prompted by pressing (A) -3. If you do not already have a NAND backup, **backup SysNAND to `NANDmin.bin` when prompted by pressing (A)** -4. Allow the transfer process to proceed automatically, this will take some time -5. Once the transfer is complete, press (Select) to eject your SD card +2. Επιλέξτε την εικόνα ctrtransfer 9.2.0 όταν σας ζητηθεί πατώντας (A) +3. Εάν δεν έχετε ήδη αντίγραφα ασφαλείας της NAND **δημιουργήστε αντίγραφα ασφαλείας της SysNAND στο `NANDmin.bin` όταν σας ζητηθεί πατώντας (A)** +4. Επιτρέψτε στην διαδικασία της μεταφοράς να συνεχιστεί αυτόματα, η οποία μπορεί να διαρκέσει αρκετά λεπτά +5. Μόλις η μεταφορά ολοκληρωθεί, πατήστε (Select) για να εξάγετε την κάρτα SD 6. Put your SD card in your computer, then copy `NANDmin.bin` and `NANDmin.bin.sha` from the `/files9/` folder on your SD card to a safe location - + Make backups in multiple locations - + This backup will save you from a brick if anything goes wrong in the future + + Δημιουργήστε αντίγραφα ασφαλείας σε πολλαπλές τοποθεσίες + + Αυτά τα αντίγραφα ασφαλείας θα σας σώσουν από την αχρήστευση της συσκευής σε περίπτωση που κάτι πάει στραβά 7. Delete the 9.2.0 ctrtransfer image `.bin` and `.bin.sha` from the `/files9/` folder on your SD card after copying it -8. Reinsert your SD card into your 3DS +8. Επανατοποθετήστε την κάρτα SD μέσα στο 3DS -##### Section IV - Editing SecureInfo +##### Ενότητα IV - Επεξεργασία του SecureInfo -1. Press (Start) then hold (Up) to reboot into arm9loaderhax GodMode9 -2. Navigate to `SYSNAND CTRNAND` -> `rw` -> `sys` -3. Press (Y) on `SecureInfo_A` to copy it -4. Press (Y) to paste a copy of `SecureInfo_A` -5. Select "Copy path(s)" -6. Press (A) to unlock SysNAND writing, then input the key combo given -7. Select "Choose new name" -8. Use the D-Pad to rename the file to `SecureInfo_C`, pressing (A) when you're done (overwrite any existing `SecureInfo_C`) -9. Scroll down to the `SecureInfo_C` you just pasted -10. Press (A) on `SecureInfo_C` then select "Show in Hexeditor" -11. Press (A) to continue -12. Press (A) to enter edit mode -13. Go to the beginning of line 00000100 and press (A) on it +1. Πατήστε (Start) και έπειτα κρατήστε πατημένο το (Up) για να εκκινήσετε στο GodMode9 του arm9loaderhax +2. Περιηγηθείτε στο `SYSNAND CTRNAND` -> `rw` -> `sys` +3. Πατήστε το (Y) στο `SecureInfo_A` για να το αντιγράψετε +4. Πατήστε (Y) για να επικολλήσετε το `SecureInfo_A` +5. Επιλέξτε "Copy path(s)" +6. Πατήστε (A) για να ξεκλειδώσετε την εγγραφή στη SysNAND και έπειτα εισάγετε τον συνδυασμό πλήκτρων που θα σας δοθεί +7. Επιλέξτε "Choose new name" +8. Χρησιμοποιώντας το D-Pad, μετονομάστε το αρχείο σε `SecureInfo_C`, πατώντας (Α) μόλις τελειώσετε (αντικαταστήστε οποιαδήποτε τυχόν `SecureInfo_C`) +9. Μεταβείτε στο `SecureInfo_C` που μόλις επικολλήσατε +10. Πατήστε (Α) στο `SecureInfo_C` και έπειτα επιλέξτε "Show in Hexeditor" +11. Πατήστε (A) για να συνεχίσετε +12. Πατήστε (A) για να ενεργοποιήσετε τη λειτουργία επεξεργασίας +13. Μεταβείτε στην αρχή της γραμμής 00000100 και πατήστε (Α) 14. Hold (A) while pressing (Up) or (Down) on the D-Pad to edit the number 15. Change the first number pair on line 00000100 to the following pair that corresponds to *the region you want to change to*: - "00" : JPN - "01" : USA - "02" : EUR 16. Press (B) to exit edit mode, then save changes, then press (B) again to return to the directory -17. You should see both a `SecureInfo_A` and `SecureInfo_C` if everything was done properly. (`SecureInfo_C` is used in place of `SecureInfo_A` when using Luma3DS if it detects the file on boot) -18. Press (Start) to reboot +17. Θα πρέπει να βλέπετε και το αρχείο `SecureInfo_A` αλλά και το `SecureInfo_C` εάν όλα τα βήματα πραγματοποιήθηκαν επιτυχώς. (`SecureInfo_C` is used in place of `SecureInfo_A` when using Luma3DS if it detects the file on boot) +18. Πατήστε (Start) για επανεκκίνηση -##### Section V - Reinstalling Tickets +##### Ενότητα V - Επανεγκατάσταση των Tickets -1. Open FBI -2. Select "SD" -3. Select "files9" -4. Select "\" -5. Select "Install and delete all tickets" -6. Wait. The system may appear to freeze, just give it time. -7. Press (A) to confirm -8. Press (B) to decline installing tickets from CDN. -9. Exit with the home button +1. Ανοίξτε το FBI +2. Επιλέξτε "SD" +3. Επιλέξτε "files9" +4. Επιλέξτε "\" +5. Επιλέξτε "Install and delete all tickets" +6. Υπομονή. Μπορεί να φαίνεται σαν να πάγωσε το σύστημα, απλά δώστε του χρόνο. +7. Πατήστε (A) για επιβεβαίωση +8. Πατήστε (B) για να αρνηθείτε την εγκατάσταση των tickets από το CDN. +9. Πραγματοποιήστε έξοδο πατώντας το home button -##### Section VI - Region settings +##### Ενότητα VI - Ρυθμίσεις περιοχής 1. Open the System Settings -2. Go to "Other Settings", "Profile", then "Region Settings" -3. Select a country from the region you switched to -4. If prompted, you do not need to set a state +2. Μεταβείτε στο "Other Settings", "Profile" και έπειτα στο "Region Settings" +3. Επιλέξτε την χώρα της περιοχής από την οποία αλλάξατε +4. Εάν σας ζητηθεί, δεν είναι αναγκαίο να δηλώσετε πολιτεία 5. Update your region changed CFW SysNAND to the latest version -##### Section VII - Restore config save +##### Ενότητα VII - Επαναφορά του config save -1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 -2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +1. Πατήστε (Start) και έπειτα κρατήστε πατημένο το (X) για να εκκινήσετε στο Decrypt9 του arm9loaderhax +2. Μεταβείτε στην επιλογή "SysNAND Options", έπειτα επιλέξτε "System Save Inject" και μετά "Inject configsave.bin" + +___ Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/el_GR/Site-Navigation.txt b/_pages/el_GR/Site-Navigation.txt index 6b159cf68..7d11f9de9 100644 --- a/_pages/el_GR/Site-Navigation.txt +++ b/_pages/el_GR/Site-Navigation.txt @@ -1,46 +1,46 @@ --- -title: "Site Navigation" # -lang: en -permalink: /site-navigation.html +title: "Πλοήγηση Ιστοτόπου" # +lang: el +permalink: /el_GR/site-navigation.html layout: single-no-ads sitemap: false --- {% capture notice-1 %} -**Popular** +**Δημοφιλή** -+ [Installing arm9loaderhax](installing-arm9loaderhax) ++ [Εγκατάσταση του arm9loaderhax](installing-arm9loaderhax) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {% endcapture %}
{{ notice-1 | markdownify }}
{% capture notice-2 %} -**All** +**Όλα** + [2.1.0 ctrtransfer](2.1.0-ctrtransfer) + [9.2.0 ctrtransfer](9.2.0-ctrtransfer) -+ [Cart Update](cart-update) -+ [Credits](credits) -+ [Decrypt9 (Browser)](decrypt9-(browser)) ++ [Ενημέρωση με κασέτα](cart-update) ++ [Ευχαριστίες](credits) ++ [Decrypt9 (Πρόγραμμα Πλοήγησης)](decrypt9-(browser)) + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) + [Decrypt9 (MSET)](decrypt9-(mset)) -+ [Donations](donations) ++ [Δωρεές](donations) + [F3 (Linux)](f3-(linux)) + [F3X (Mac)](f3x-(mac)) -+ [FAQ](faq) -+ [Get Started (New 3DS)](get-started-(new-3ds)) -+ [Get Started (Old 3DS)](get-started-(old-3ds)) -+ [Get Started](get-started) ++ [Συνήθεις Ερωτήσεις](faq) ++ [Ας αρχίσουμε (New 3DS)](get-started-(new-3ds)) ++ [Ας αρχίσουμε (Old 3DS)](get-started-(old-3ds)) ++ [Ας αρχίσουμε](get-started) + [H2testw (Windows)](h2testw-(windows)) + [Home](/) + [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax)) -+ [Installing arm9loaderhax](installing-arm9loaderhax) -+ [Move EmuNAND](move-emunand) -+ [NTR and Cubic Ninja](ntr-and-cubic-ninja) -+ [Region Changing](region-changing) ++ [Εγκατάσταση του arm9loaderhax](installing-arm9loaderhax) ++ [Μετακίνηση της EmuNAND](move-emunand) ++ [NTR και Cubic Ninja](ntr-and-cubic-ninja) ++ [Αλλαγή περιοχής](region-changing) + [Troubleshooting](troubleshooting) -+ [Updating A9LH](updating-a9lh) -+ [Why Ads?](why-ads) ++ [Ενημέρωση του A9LH](updating-a9lh) ++ [Γιατί βλέπω διαφημίσεις?](why-ads) {% endcapture %}
{{ notice-2 | markdownify }}
\ No newline at end of file diff --git a/_pages/el_GR/Troubleshooting.txt b/_pages/el_GR/Troubleshooting.txt index ffcc38e0a..6069d82de 100644 --- a/_pages/el_GR/Troubleshooting.txt +++ b/_pages/el_GR/Troubleshooting.txt @@ -1,179 +1,179 @@ --- -title: "Troubleshooting" # -lang: en -permalink: /troubleshooting.html +title: "Αντιμετώπιση Προβλημάτων" # +lang: el +permalink: /el_GR/troubleshooting.html --- -If you are unable to boot your 3DS, please look for the section relevant to you, and follow the instructions. Once a solution works for you, you can proceed on with the main guide -(The section is fairly long, try using Ctrl+F to search for your issue.) +Εάν δεν μπορείτε να εκκινήσετε το 3DS σας, ψάξτε για την ενότητα σχετική με εσάς και ακολουθήστε τις οδηγίες. Μόλις μια λύση λειτουργήσει για εσάς, μπορείτε να προχωρήσετε με τον κύριο οδηγό +(Η παρακάτω ενότητα είναι σχετικά μεγάλη, χρησιμοποιήστε το Ctrl+F για να αναζητήσετε το πρόβλημά σας.) {: .notice--primary} -**If you still cannot solve your issue and need to reach out for help, please paste the contents of all relevant .log files from the root of your SD card into a [Gist](https://gist.github.com/), then come for help prepared with a detailed description of your problem and what you've tried.** +**Εάν, παρ' όλα αυτά, δεν καταφέρετε να επιλύσετε το πρόβλημα και χρειάζεστε περαιτέρω βοήθεια, παρακαλείσθε να αντιγράψετε όλα τα περιεχόμενα των σχετικών αρχείων .log από την ρίζα της κάρτας SD στο [Gist](https://gist.github.com/), και έπειτα να έρθετε για βοήθεια προετοιμασμένοι με μια αναλυτική περιγραφή του προβλήματός σας και των μέσων που προσπαθήσατε να χρησιμοποιήσετε για την επίλυσή του.** {: .notice--info} -## DSi / DS functionality is broken after completing the guide +## Οι λειτουργίες του DSi / DS δεν λειτουργούν έπειτα από την ολοκλήρωση του οδηγού -#### What you need +#### Τι χρειάζεστε -* The TWL_FIRM `.cia` for your device - + - [`New_3DS TWL_FIRM - v9936.cia`](magnet:?xt=urn:btih:eab8558c97b18b1f329a2bfcc3c899b84c082a27&dn=New%5F3DS%20TWL%5FFIRM%20-%20v9936.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) - + - [`Old_3DS TWL_FIRM - v8817.cia`](magnet:?xt=urn:btih:17511eadb6e6f3ff22d04f90644e37bd2d96ca43&dn=Old%5F3DS%20TWL%5FFIRM%20-%20v8817.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`TWL Version Data - v0.cia`](magnet:?xt=urn:btih:4a106681407fede5de95cc8bda635432481f6b5d&dn=TWL%20Version%20Data%20-%20v0.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`DS Internet - v2048.cia`](magnet:?xt=urn:btih:2b9df8496922f2546dfb0b01220068ce53c19d3d&dn=DS%20Internet%20-%20v2048.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`DS Download Play - v1024.cia`](magnet:?xt=urn:btih:b581d3c5d98f5e621fddfc1ce5704bb45bf05a8c&dn=DS%20Download%20Play%20-%20v1024.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`Nintendo DS Cart Whitelist - v11264.cia`](magnet:?xt=urn:btih:7b90d506ad032a581a00035616eaa17a68c48eff&dn=Nintendo%20DS%20Cart%20Whitelist%20-%20v11264.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +Το αρχείο TWL_FIRM `.cia` για την συσκευή σας + + - [`New_3DS TWL_FIRM - v9936.cia`](magnet:?xt=urn:btih:eab8558c97b18b1f329a2bfcc3c899b84c082a27&dn=New%5F3DS%20TWL%5FFIRM%20-%20v9936.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) + + - [`Old_3DS TWL_FIRM - v8817.cia`](magnet:?xt=urn:btih:17511eadb6e6f3ff22d04f90644e37bd2d96ca43&dn=Old%5F3DS%20TWL%5FFIRM%20-%20v8817.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`TWL Version Data - v0.cia`](magnet:?xt=urn:btih:4a106681407fede5de95cc8bda635432481f6b5d&dn=TWL%20Version%20Data%20-%20v0.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`DS Internet - v2048.cia`](magnet:?xt=urn:btih:2b9df8496922f2546dfb0b01220068ce53c19d3d&dn=DS%20Internet%20-%20v2048.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`DS Download Play - v1024.cia`](magnet:?xt=urn:btih:b581d3c5d98f5e621fddfc1ce5704bb45bf05a8c&dn=DS%20Download%20Play%20-%20v1024.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`Nintendo DS Cart Whitelist - v11264.cia`](magnet:?xt=urn:btih:7b90d506ad032a581a00035616eaa17a68c48eff&dn=Nintendo%20DS%20Cart%20Whitelist%20-%20v11264.cia&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -#### Instructions +#### Οδηγίες -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία -1. Create a folder named `cias` on the root of your SD card if it does not already exist -2. Copy `TWL Version Data - v0.cia` to the `/cias/` folder on your SD card -3. Copy `DS Download Play - v1024.cia` to the `/cias/` folder on your SD card -4. Copy `DS Internet - v2048.cia` to the `/cias/` folder on your SD card -5. Copy `Nintendo DS Cart Whitelist - v11264.cia` to the `/cias/` folder on your SD card -6. Copy either `New_3DS TWL_FIRM - v9936.cia` or `Old_3DS TWL_FIRM - v8817.cia` to the `/cias/` folder on your SD card +1. Δημιουργήστε έναν φάκελο με το όνομα `cias` στην ρίζα της κάρτας SD, σε περίπτωση που δεν υπάρχει ήδη +2. Αντιγράψτε το αρχείο `TWL Version Data - v0.cia` στον φάκελο `/cias/` στην κάρτα SD +3. Αντιγράψτε το αρχείο `DS Download Play - v1024.cia` στον φάκελο `/cias/` στην κάρτα SD +4. Αντιγράψτε το αρχείο `DS Internet - v2048.cia` στον φάκελο `/cias/` στην κάρτα SD +5. Αντιγράψτε το αρχείο `Nintendo DS Cart Whitelist - v11264.cia` στον φάκελο `/cias/` στην κάρτα SD +6. Αντιγράψτε είτε το αρχείο `New_3DS TWL_FIRM - v9936.cia` είτε το `Old_3DS TWL_FIRM - v8817.cia` στον φάκελο `/cias/` στην κάρτα SD -##### Section II - Installing titles +##### Ενότητα II - Εγκατάσταση των τίτλων -1. Open FBI -2. Select "SD" -3. Select "cias" -4. Select "\" -5. Select "Install and delete all CIAs" -6. Exit with the home button +1. Ανοίξτε το FBI +2. Επιλέξτε "SD" +3. Επιλέξτε "cias" +4. Επιλέξτε "\" +5. Επιλέξτε "Install and delete all CIAs" +6. Πραγματοποιήστε έξοδο πατώντας το home button -## Removing an NNID without formatting the device +## Αφαίρεση του NNID χωρίς την διαμόρφωση της συσκευής -#### What you need +#### Τι χρειάζεστε -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -#### Instructions +#### Οδηγίες -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` -2. Boot holding (Up) to reboot into arm9loaderhax GodMode9 -3. Navigate to `SYSNAND CTRNAND` -> `data` -> (32 Character ID) -> `sysdata` -> `00010038` -4. Hold down the (R) trigger, then press (X) on `00000000` to rename this file -5. Press (Up) once to change the name to `10000000` -6. Press (A) to save changes -7. Press (A) to unlock SysNAND writing, then input the key combo given -8. Navigate back to the Main Menu -9. Press (Start) to reboot +1. Αντιγράψτε το `GodMode9.bin` από το GodMode9 `.zip` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `GodMode9.bin` του φακέλου `/luma/payloads/` σε `up_GodMode9.bin` +2. Εκκινήστε κρατώντας πατημένο το (Πάνω) για να επανεκκινήσετε στο arm9loaderhax GodMode9 +3. Περιηγηθείτε στο `SYSNAND CTRNAND` -> `data` -> (ΙD 32 χαρακτήρων) -> `sysdata` -> `00010038` +4. Κρατήστε πατημένο το (R), έπειτα πατήστε το (X) στο `00000000` για να μετονομάσετε αυτό το αρχείο +5. Πατήστε το (Πάνω) μία φορά για να αλλάξετε το όνομα σε `10000000` +6. Πατήστε (A) για να αποθηκεύσετε τις αλλαγές +7. Πατήστε (A) για να ξεκλειδώσετε την εγγραφή στη SysNAND και έπειτα εισάγετε τον συνδυασμό πλήκτρων που θα σας δοθεί +8. Επιστρέψτε στο Αρχικό Μενού +9. Πατήστε (Start) για να επανεκκινήσετε ## Cannot inject H&S on Gateway downgraded device -This is caused by Gateway implementing a very shoddy downgrade method, which leaves two versions of each app on the system. One of them is unused, but it confuses Decrypt9, causing it to inject into the wrong one. +Το πρόβλημα προκλήθηκε λόγο του ότι η Gateway χρησιμοποιεί μία πολύ κακοφτιαγμένη μέθοδο υποβάθμισης, η οποία αφήνει δύο εκδόσεις για κάθε μια από τις εφαρμογές του συστήματος. One of them is unused, but it confuses Decrypt9, causing it to inject into the wrong one. -#### What you need +#### Τι χρειάζεστε -* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) +* Την τελευταία έκδοση του [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) -#### Instructions +#### Οδηγίες -1. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` in `/luma/payloads/` to `up_GodMode9.bin` -2. Reinsert your SD card into your 3DS -3. Open GodMode9 from arm9loaderhax by holding (Up) during boot -4. Navigate to `SYSNAND CTRNAND` -> `title` -> `00040010` -5. Navigate to the folder for your device and region: +1. Αντιγράψτε το `GodMode9.bin` από το GodMode9 `.zip` στον φάκελο `/luma/payloads/` στην κάρτα SD και μετονομάστε το `GodMode9.bin` του φακέλου `/luma/payloads/` σε `up_GodMode9.bin` +2. Επανατοποθετήστε την κάρτα SD στο 3DS +3. Ανοίξτε το GodMode9 από το arm9loaderhax κρατώντας πατημένο το (Πάνω) κατά την εκκίνηση +4. Περιηγηθείτε στο `SYSNAND CTRNAND` -> `title` -> `00040010` +5. Μεταβείτε στον φάκελο για την περιοχή και συσκευή σας: + **Old 3DS EUR**: `00022300` -> `content` + **Old 3DS JPN**: `00020300` -> `content` + **Old 3DS USA**: `00021300` -> `content` + **New 3DS EUR**: `20022300` -> `content` + **New 3DS JPN**: `20020300` -> `content` + **New 3DS USA**: `20021300` -> `content` -6. Notice that there are two sets of app and tmd files, one set with uppercase extensions (`.TMD` and `.APP`), and one set with lowercase extensions (`.tmd` and `.app`) -7. While holding the (R) trigger, press (Y) to create a new directory -8. Press (A) to confirm the name `newdir` (it doesn't matter what it's called) -9. Press (A) to unlock SysNAND writing, then input the key combo given -10. Press the (L) trigger on each of the uppercase extension files (`.TMD` and `.APP`) to mark them -11. Press (Y) to copy the files -12. Navigate to `newdir` -13. Press (Y) to paste the files -14. Select "Move path(s)" -15. The uppercase extension files will have been moved to the `newdir` directory -16. Press (Start) to reboot +6. Σημειώστε ότι υπάρχουν δύο πακέτα από εφαρμογές και αρχεία tmd, ένα με χρήση κεφαλαίων στην επέκταση (`.TMD` and `.APP`), και ένα με χρήση μικρών στην επέκταση (`.tmd` and `.app`) +7. Ενώ κρατάτε το (R), πατήστε (Y) για να δημιουργήσετε νέο κατάλογο +8. Πατήστε (A) για να επιβεβαιώσετε το όνομα `newdir` (δεν έχει σημασία το όνομα) +9. Πατήστε (A) για να ξεκλειδώσετε την εγγραφή στη SysNAND και έπειτα εισάγετε τον συνδυασμό πλήκτρων που θα σας δοθεί +10. Πατήστε το (L) σε κάθε αρχείο με επέκταση κεφαλαίων γραμμάτων (`.TMD` and `.APP`) για να τα επιλέξετε +11. Πατήστε (Y) για να αντιγράψετε τα αρχεία +12. Μεταβείτε στο `newdir` +13. Πατήστε (Y) για να επικολλήσετε τα αρχεία +14. Επιλέξτε "Move path(s)" +15. Τα αρχεία με την επέκταση κεφαλαίων γραμμάτων έχουν μεταφερθεί στον κατάλογο `newdir` +16. Πατήστε (Start) για να επανεκκινήσετε 17. Return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection 18. If this still doesn't work, move the uppercase extension files back to the `content` folder, then move the lowercase extension files to the `newdir` folder, then return to [Installing arm9loaderhax](installing-arm9loaderhax) and retry the FBI injection -## A browser based exploit is not working -Browser based exploits (such as browserhax or 2xrsa) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps +## Ένα exploit βασισμένο στο πρόγραμμα περιήγησης δεν λειτουργεί +Τα exploits τα οποία είναι βασισμένα στο πρόγραμμα περιήγησης (όπως το browserhax ή το 2xrsa) είναι συχνά ασταθή και προκαλούν σφάλματα συχνά, αλλά μπορούν κάποιες φορές να διορθωθούν ακολουθώντας τα παρακάτω βήματα -1. Open the browser, then open the browser settings -2. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data) -3. Try the exploit again +1. Ανοίξτε το πρόγραμμα περιήγησης και έπειτα ανοίξτε τις ρυθμίσεις του +2. Κατεβείτε στο τέλος και επιλέξτε to Initialize Savedata (Μπορεί επίσης να ονομάζεται και Clear All Save Data) +3. Ξαναπροσπαθήστε το exploit -## System boots directly SafeA9LHInstaller -You copied the wrong `arm9loaderhax.bin` file to your SD card (you were only supposed to copy the `3ds` folder and `SafeA9LHInstaller.dat` file from the SafeA9LHInstaller zip) +## Το σύστημα εκκινεί απευθείας στο SafeA9LHInstaller +Αντιγράψατε το λάθος αρχείο `arm9loaderhax.bin` στην κάρτα SD (Υποτίθεται πως έπρεπε να αντιγράψετε μόνο τον φάκελο`3ds` και το αρχείο `SafeA9LHInstaller.dat` από το SafeA9LHInstaller zip) -1. Use the correct `arm9loaderhax.bin` -2. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card -3. Reboot holding (Select) and continue +1. Χρησιμοποιήστε το σωστό αρχείο `arm9loaderhax.bin` +2. Αντιγράψτε το αρχείο `arm9loaderhax.bin` από το Luma3DS `.zip` στη ρίζα της κάρτας SD +3. Επανεκκινήστε κρατώντας πατημένο το (Select) και συνεχίστε ## SafeA9LHInstaller shows a glitched screen -This happens occasionally, but the reason is unknown. The buttons will still work, but the screen will be glitched looking +Αυτό συμβαίνει περιστασιακά, παρ' όλα αυτά ο λόγος παραμένει άγνωστος. The buttons will still work, but the screen will be glitched looking -1. Follow instructions as normal -2. Press (Select) and arm9loaderhax will be installed -3. Wait a few seconds -4. Shut down your console by pressing any button +1. Ακολουθήστε κανονικά της οδηγίες +2. Πατήστε (Select) και το arm9loaderhax θα εγκατασταθεί +3. Περιμένετε μερικά δευτερόλεπτα +4. Τερματίστε την κονσόλα πατώντας οποιοδήποτε κουμπί -## Decrypt9 or Hourglass9 won't restore / can't find my NAND backup +## To Decrypt9 ή το Hourglass9 δεν επαναφέρει / βρίσκει τα αντίγραφα ασφαλείας μου της NAND -1. Make sure you do not have any folder named "Decrypt9" on **the root** of your SD card -2. Try checking your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac)) -3. Try backing up your SD card files, then formatting it and copying them back -4. Try a different SD card +1. Βεβαιωθείτε πως δεν έχετε κανέναν φάκελο με το όνομα "Decrypt9" στην **ρίζα** της κάρτας SD +2. Δοκιμάστε να ελέγξετε την κάρτα SD για σφάλματα χρησιμοποιώντας το [H2testw (Windows)](h2testw-(windows)), το [F3 (Linux)](f3-(linux)), ή το [F3X (Mac)](f3x-(mac)) +3. Δοκιμάστε να δημιουργήσετε αντίγραφα ασφαλείας των αρχείων της κάρτας SD, έπειτα να την διαμορφώσετε και να τα αντιγράψετε πίσω +4. Δοκιμάστε μία άλλη κάρτα SD -## Black screen on SysNAND boot +## Μαύρη οθόνη κατά την εκκίνηση σε SysNAND 1. Try booting with your SD card out, and then reinserting it after booting. - 1. Power off your 3DS by holding down the power button. - 2. Take out the SD card. - 3. Power on the 3DS. - 4. When the home menu appears, reinsert your SD card. + 1. Απενεργοποιήστε το 3DS κρατώντας πατημένο το κουμπί ενεργοποίησης. + 2. Αφαιρέστε την κάρτα SD. + 3. Ενεργοποιήστε το 3DS. + 4. Όταν το home menu εμφανιστεί, επανατοποθετήστε την κάρτα SD. 5. If this worked, you should Clear Home Menu's extdata by navigating to the following folder on your SD card: `/Nintendo 3DS/(32 Character ID)/(32 Character ID)/extdata/00000000/` - + EUR Region: Delete `00000098` - + JPN Region: Delete `00000082` - + USA Region: Delete `0000008f` - + KOR Region: Delete `000000A9` -2. Try booting without any cartridges inserted (including flashcarts) -3. If you have a hardmod and a NAND backup, flash the backup back to SysNAND. -4. Try booting into recovery mode and updating your system. - *This probably will not work for an Old 3DS downgraded to 2.1.0* - **This will BRICK a New 3DS downgraded to 2.1.0** - 1. Power off your 3DS by holding down the power button. - 2. Hold (L)+(R)+(A)+(Up). - 3. Power on the 3DS. + + Περιοχή EUR: Διαγράψτε το `00000098` + + Περιοχή JPN: Διαγράψτε το `00000082` + + Περιοχή USA: Διαγράψτε το `0000008f` + + Περιοχή KOR: Διαγράψτε το `000000A9` +2. Δοκιμάστε να εκκινήσετε χωρίς καμία κασέτα τοποθετημένη (συμπεριλαμβανωμένων των flashcart) +3. Εάν έχετε hardmod και ένα backup της NAND, κάντε flash το αντίγραφο ασφαλείας πίσω στη SysNAND. +4. Δοκιμάστε να εκκινήσετε το σύστημα σε λειτουργία αποκατάστασης και να το αναβαθμίσετε. + *Αυτό πιθανώς δεν θα λειτουργήσει για ένα Old 3DS υποβαθμισμένο σε 2.1.0* + **Αυτό θα οδηγήσει σε ΑΧΡΗΣΤΕΥΣΗ ενός New 3DS υποβαθμισμένου σε 2.1.0** + 1. Απενεργοποιήστε το 3DS κρατώντας πατημένο το κουμπί ενεργοποίησης. + 2. Κρατήστε πατημένα τα (L)+(R)+(A)+(Up). + 3. Ενεργοποιήστε το 3DS. 4. If you enter safe mode, update your 3DS *only if you have an entrypoint for the latest FW version and it is possible to downgrade from it* and attempt the downgrade again. -5. Your 3DS may be bricked. For support, ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp). +5. To 3DS σας μπορεί να έχει αχρηστευτεί. Για υποστήριξη, ζητήστε βοήθεια στο [#3dshacks στο Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) ή στο [3DS Hacking στο Discord](https://discord.gg/MWxPgEp). -## Black screen on SysNAND boot after installing arm9loaderhax +## Μαύρη οθόνη κατά την εκκίνηση SysNAND μετά την εγκατάσταση του arm9loaderhax -1. Ensure you have a working payload. - 1. Check for the existence of `arm9loaderhax.bin` in the root of your SD card. +1. Βεβαιωθείτε πως έχετε ένα λειτουργικό payload. + 1. Ελέγξτε για την ύπαρξη του αρχείου `arm9loaderhax.bin` στην ρίζα της κάρτας SD. 2. Try resetting Luma's config and fix options - 1. Delete `/luma/config.bin` from your SD card - 2. Set your options when it boots -3. Test booting Hourglass9 - 1. On Luma3DS, hold (Start) on boot -4. Try deleting home menu's extdata + 1. Διαγράψτε το αρχείο `/luma/config.bin` από την κάρτα SD + 2. Ορίστε τις προτιμήσεις σας όταν το εκκινήσετε +3. Δοκιμάστε να εκκινήσετε το Hourglass9 + 1. Στο Luma3DS, κρατήστε πατημένο το (Start) κατά την εκκίνηση +4. Δοκιμάστε να διαγράψετε τα extdata του home menu 1. Clear Home Menu's extdata by navigating to the following folder on your SD card: `/Nintendo 3DS/(32 Character ID)/(32 Character ID)/extdata/00000000/` - + EUR Region: Delete `00000098` - + JPN Region: Delete `00000082` - + USA Region: Delete `0000008f` - + KOR Region: Delete `000000A9` -5. Try booting without any cartridges inserted (including flashcarts) -6. If you previously downgraded with Gateway, ensure that you are using the latest Luma3DS version (v6.2.3 or higher, at the least) -7. If your NAND is of a version between 3.0.0 and 4.5.0, do the following: - + Ensure that you are using the latest Luma3DS version (v6.6 or higher, at the least) - + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin` - + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) - + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card - + Delete both of these files after updating your 3DS -8. Try following [9.2.0 ctrtransfer](9.2.0-ctrtransfer) -9. Ask for help at [#3dshacks on Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) or [3DS Hacking on Discord](https://discord.gg/MWxPgEp). + + Περιοχή EUR: Διαγράψτε το `00000098` + + Περιοχή JPN: Διαγράψτε το `00000082` + + Περιοχή USA: Διαγράψτε το `0000008f` + + Περιοχή KOR: Διαγράψτε το `000000A9` +5. Δοκιμάστε να εκκινήσετε χωρίς καμία κασέτα τοποθετημένη (συμπεριλαμβανωμένων των flashcart) +6. Εάν είχατε υποβαθμίσει προηγουμένως με την χρήση Gateway, βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.2.3 και πάνω, τουλάχιστον) +7. Εάν η NAND βρίσκεται μεταξύ των εκδόσεων 3.0.0 και 4.5.0, ακολουθήστε τα παρακάτω βήματα: + + Βεβαιωθείτε ότι χρησιμοποιείτε την τελευταία έκδοση του Luma3DS (v6.6 και πάνω, τουλάχιστον) + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) και μετονομάστε το σε `firmware.bin` + + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) + + Αντιγράψτε τα αρχεία `firmware.bin` and `cetk` στον φάκελο `/luma/` στην κάρτα SD + Διαγράψτε και τα δύο αρχεία μετά από την ενημέρωση του 3DS +8. Δοκιμάστε αυτό [9.2.0 ctrtransfer](9.2.0-ctrtransfer) +9. Ζητήστε βοήθεια στο [#3dshacks στο Rizon IRC](https://www.reddit.com/r/3dshacks/wiki/irc) ή στο [3DS Hacking στο Discord](https://discord.gg/MWxPgEp). -## Blue screen on boot (bootrom error) +## Μπλε οθόνη κατά την εκκίνηση (Σφάλμα του bootrom) -1. Your 3DS is bricked +1. Το 3DS σας έχει αχρηστευθεί 2. You will need to get a [hardmod](https://gbatemp.net/threads/414498/) or repair / replace the device \ No newline at end of file diff --git a/_pages/el_GR/Updating-A9LH.txt b/_pages/el_GR/Updating-A9LH.txt index d7bd37745..1ad3cc6c7 100644 --- a/_pages/el_GR/Updating-A9LH.txt +++ b/_pages/el_GR/Updating-A9LH.txt @@ -1,92 +1,92 @@ --- -title: "Updating A9LH" # -lang: en -permalink: /updating-a9lh.html +title: "Ενημέρωση του A9LH" # +lang: el +permalink: /el_GR/updating-a9lh.html --- -### Last Update: 3 Nov 2016 +### Τελευταία Ενημέρωση στις: 3 Νοεμβρίου 2016 -The actual installation of arm9loaderhax itself consists of payload files installed into the NFIRM partitions on your device's NAND chip, which is soldered to the motherboard itself. These payloads are updated rarely and only really serve the purpose of launching `arm9loaderhax.bin` from the SD Card, which is, in our case, Luma3DS. +Η πραγματική εγκατάσταση του arm9loaderhax αποτελείται από αρχεία λεγόμενα ως payload τα οποία εγκαθίστανται στα NFIRM διαμερίσματα του τσιπ της NAND της συσκευής σας, το οποίο είναι συγκολλημένο μέσα στην μητρική του συστήματος. Αυτά τα payload αρχεία ενημερώνονται σπάνια και συντελούν στον σκοπό της εκκίνησης του `arm9loaderhax.bin` από την κάρτα SD,που στην περίπτωση μας είναι το Luma3DS. {: .notice} -If you do not know what version of arm9loaderhax you are running, just install the latest version with these steps. Installing the latest version while already on the latest version will have no effect. +Εάν δεν ξέρετε ποια έκδοση του arm9loaderhax τρέχετε, τότε εγκαταστήστε την πιο πρόσφατη έκδοση με αυτά τα βήματα. Εγκαθιστώντας την πιο πρόσφατη έκδοση ενώ είστε ήδη σε αυτή δεν θα έχει κανένα αποτέλεσμα. {: .notice--info} -If you have a PIN set on Luma, you must temporarily turn it off to do these steps. You can re-enable the PIN after the update. +Εάν έχετε θέσει κάποιο PIN στο Luma, θα πρέπει προσωρινά να το απενεργοποιήσετε για να ακολουθήσετε τα βήματα του οδηγού. Μπορείτε να ενεργοποιήσετε ξανά το PIN σας μετά την ενημέρωση. {: .notice--info} -If you are using a payload that does not init the screen on its own (such as Bootanim9), you will need to rename it to `arm9loaderhax_si.bin` instead of `arm9loaderhax.bin` +Εάν χρησιμοποιείτε ένα payload το οποίο δεν ενεργοποιείται στην οθόνη από μόνο του (όπως το Bootanim9), θα πρέπει να το μετονομάσετε σε `arm9loaderhax_si.bin` αντί για `arm9loaderhax.bin` {: .notice--info} -The versions of data_input only refer to revisions of the `.zip` to be compatible with different installer versions, and are *not* the same thing as updating a9lh itself (the payload files). They make no practical difference beyond the installation process. +Οι εκδόσεις του data_input αναφέρονται μόνο σε αναθεωρήσεις του `.zip` οι οποίες είναι συμβατές με διαφορετικές εκδόσεις εγκατάστασης, *δεν* είναι το ίδιο όπως η ενημέρωση του a9lh (τα αρχεία payload). Δεν έχουν καμία πρακτική διαφορά πέρα από την διαδικασία εγκατάστασης. {: .notice--info} -These steps will also update your various payloads and the AES key database. +Τα παρακάτω βήματα θα ενημερώσουν επίσης και τα διάφορα payload όπως και την βάση δεδομένων AES key. {: .notice--success} -#### What you need +#### Τι χρειάζεστε -* - [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* - [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* The latest release of [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* -* The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* -* The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) +* - [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* - [`data_input_v4.zip`](magnet:?xt=urn:btih:00f03ff69b5961307303d5e4778a2f65a528bf2d&dn=data%5Finput%5Fv4.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) +* Την τελευταία έκδοση του [SafeA9LHInstaller](https://github.com/AuroraWright/SafeA9LHInstaller/releases/latest) *(the `.7z` file)* +* Την τελευταία έκδοση του [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)* +* Την τελευταία έκδοση του [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest) -#### Instructions +#### Οδηγίες -**For all of these instructions, OVERWRITE any existing files on your SD card.** +**Για όλες αυτές τις οδηγίες παρακαλώ ΑΝΤΙΚΑΤΑΣΤΗΣΤΕ οποιαδήποτε υπάρχοντα αρχεία στην κάρτα σας SD.** -##### Section I - Prep work +##### Ενότητα I - Προετοιμασία -1. Delete any existing `aeskeydb.bin` from the root of your SD card -2. Delete the `a9lh` folder from the root of your SD card if it exists -3. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card -4. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin` -5. Copy `arm9loaderhax.bin` from the SafeA9LHInstaller `.zip` to the `/luma/payloads/` folder on your SD card -6. Rename `arm9loaderhax.bin` in `/luma/payloads/` to `down_safea9lhinstaller.bin` -7. Copy the `a9lh` folder from data_input `.zip` to the root of your SD Card -8. Copy _the contents of_ the arm9loaderhax `.7z` to `a9lh` folder on your SD card -9. Copy `arm9loaderhax.bin` from the Luma3DS `.zip` to the root of your SD card, overwrite existing files -10. Reinsert your SD card into your 3DS +1. Διαγράψτε, εάν υπάρχει, οποιοδήποτε aeskeydb.bin από τη ρίζα της κάρτας SD +2. Εάν υπάρχει, διαγράψτε τον φάκελο `a9lh` από τη ρίζα της κάρτας SD +3. Αντιγράψτε το αρχείο `aeskeydb.bin` στο φάκελο `/files9/` της κάρτας SD +4. Αντιγράψτε το `Hourglass9.bin` από το Hourglass9 `.zip` στο φάκελο `/luma/payloads/` της κάρτας SD και μετονομάστε το `Hourglass9.bin` σε `start_Hourglass9.bin` +5. Αντιγράψτε το `arm9loaderhax.bin` από το SafeA9LHInstaller `.zip` στο φάκελο `/luma/payloads/` της κάρτας SD +6. Μετονομάστε το `arm9loaderhax.bin` που βρίσκεται στο `/luma/payloads/` σε `down_safea9lhinstaller.bin` +7. Αντιγράψτε τον φάκελο `a9lh` από το data_input `.zip` στη ρίζα της κάρτας SD +8. Αντιγράψτε_τα περιεχόμενα του_ arm9loaderhax `.7z` στο φάκελο `a9lh` της κάρτας SD +9. Αντιγράψτε το αρχείο `arm9loaderhax.bin` από το Luma3DS `.zip` στη ρίζα της κάρτας SD, αντικαθιστώντας τυχόν υπάρχοντα αρχεία +10. Επανατοποθετήστε την κάρτα SD μέσα στο 3DS ##### Section II - Payload update -1. Reinsert your SD card into your 3DS and boot holding (Down) -2. Press (Select) to update arm9loaderhax -3. Power off the device and put your SD card back in your computer -4. Delete the `a9lh` folder from the root of your SD card -5. Delete `safea9lhinstaller.bin` from `/luma/payloads/` +1. Τοποθετήστε ξανά την κάρτα SD στo 3DS σας και εκκινήστε το σύστημα κρατώντας το (Dοwn) +2. Πατήστε (Select) για να ενημερώσετε το arm9loaderhax +3. Απενεργοποιήστε τη συσκευή σας και τοποθετήστε την κάρτα SD στον υπολογιστή σας +4. Διαγράψτε τον φάκελο `a9lh` από τη ρίζα της κάρτας SD +5. Διαγράψτε το `down_safea9lhinstaller.bin` από το φάκελο `/luma/payloads/` -##### Section III - Configuring Luma3DS +##### Ενότητα III - Ρύθμιση του Luma3DS -1. Reinsert your SD card into your 3DS and boot holding (Select) -2. Use the (A) button and the D-Pad to turn on the following: +1. Τοποθετήστε ξανά την κάρτα SD στο 3DS σας και εκκινήστε κρατώντας πατημένο το (SELECT) +2. Χρησιμοποιήστε το κουμπί (A) και το D-Pad για να ενεργοποιήσετε το παρακάτω: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** 3. If you are using a **New 3DS**, you should *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** - + This will increase the framerate of many games, but may cause instability in others - + If some games do not work properly, disable this option and try again + + Αυτό θα αυξήσει το framerate σε πολλά παιχνίδια, αλλά μπορεί να προκαλέσει αστάθεια σε άλλα + + Εάν μερικά παιχνίδια δεν λειτουργούν σωστά, απενεργοποιήστε αυτήν την ρύθμιση και δοκιμάστε ξανά 4. Press (Start) to save and reboot -##### Section IV - CTRNAND Luma3DS +##### Ενότητα IV - CTRNAND Luma3DS -1. Open FBI -2. Select "SD" -3. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -4. Return to the FBI main menu with (B) -5. Select "CTR NAND" -6. Select "\" -7. Select the "Paste" option, then press (A) to confirm -8. Exit with the home button -9. Power off your 3DS and remove the SD card +1. Ανοίξτε το FBI +2. Επιλέξτε "SD" +3. Μεταβείτε στο `arm9loaderhax.bin` και έπειτα πατήστε (A) και επιλέξτε την επιλογή "Copy" +4. Επιστρέψτε στο αρχικό μενού του FBI πατώντας (B) +5. Επιλέξτε "CTR NAND" +6. Επιλέξτε "\" +7. Επιλέξτε "Paste" και πατήστε (A) για επιβεβαίωση +8. Πραγματοποιήστε έξοδο πατώντας το home button +9. Απενεργοποιήστε το 3DS σας και αφαιρέστε την κάρτα SD 10. Boot with the SD card removed while holding (Select) + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation -11. Use the (A) button and the D-Pad to turn on the following: +11. Χρησιμοποιήστε το κουμπί (A) και το D-Pad για να ενεργοποιήσετε το παρακάτω: + **"Show NAND or user string in System Settings"** 12. If you are using a **New 3DS**, you should *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** - + This will increase the framerate of many games, but may cause instability in others - + If some games do not work properly, disable this option and try again -13. Reinsert your SD card, then press Start to save and reboot! \ No newline at end of file + + Αυτό θα αυξήσει το framerate σε πολλά παιχνίδια, αλλά μπορεί να προκαλέσει αστάθεια σε άλλα + + Εάν μερικά παιχνίδια δεν λειτουργούν σωστά, απενεργοποιήστε αυτήν την ρύθμιση και δοκιμάστε ξανά +13. Επανατοποθετήστε την κάρτα SD και έπειτα πατήστε Start για αποθήκευση και επανεκκίνηση! diff --git a/_pages/el_GR/Why-Ads.txt b/_pages/el_GR/Why-Ads.txt index 3cf79a830..88b64ae37 100644 --- a/_pages/el_GR/Why-Ads.txt +++ b/_pages/el_GR/Why-Ads.txt @@ -1,17 +1,17 @@ --- -title: "Why Ads?" # -lang: en -permalink: /why-ads.html +title: "Γιατί βλέπω διαφημίσεις;" # +lang: el +permalink: /el_GR/why-ads.html layout: single-no-ads --- -This project is the culmination of hundreds upon hundreds of hours of constant work. +Αυτή η εργασία είναι συσσώρευση δουλειάς εκατοντάδων ωρών. -I maintain this guide, for free, and ensure it is always up to date. Because of this effort, I feel that it is fair for me to attempt to gain a meager income from my work (I receive next to no donations anymore). +Συντηρώ αυτό τον οδηγό, δωρεάν, και διασφαλίζω πως είναι πάντα ενημερωμένος. Λόγο αυτής της προσπάθειας, πιστεύω πως είναι δίκαιο να προσπαθήσω να αποκτήσω ένα λιγοστό εισόδημα για την προσπάθεια που κατέβαλα (Οι δωρεές είναι ελάχιστες πλέον). -This site costs you nothing to use, and all that I display are non-intrusive ads. If you still have a problem with this, feel free to block these ads. +Αυτή η ιστοσελίδα δεν κοστίζει απολύτως τίποτα για να χρησιμοποιηθεί και όλες οι διαφημίσεις που προβάλλω είναι διακριτικές. Αν εξακολουθείτε να έχετε πρόβλημα με αυτό, μην διστάσετε να μπλοκάρετε αυτές τις διαφημίσεις. -If you do block ads, I would like to also remind you of the [Donations](donations) page, but once again that is optional too. +Εάν μπλοκάρετε τις διαφημίσεις, θα ήθελα να σας υπενθυμίσω σχετικά με την σελίδα για τις [Donations](donations), αλλά ξανά, αυτό είναι προαιρετικό. -Thanks,
+Ευχαριστώ,
Plailect \ No newline at end of file diff --git a/_pages/en_PT/9.2.0-ctrtransfer.txt b/_pages/en_PT/9.2.0-ctrtransfer.txt index 7bcd76898..382a5bf51 100644 --- a/_pages/en_PT/9.2.0-ctrtransfer.txt +++ b/_pages/en_PT/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/en_PT/Decrypt9-(Browser).txt b/_pages/en_PT/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/en_PT/Decrypt9-(Browser).txt +++ b/_pages/en_PT/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt b/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/en_PT/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/Decrypt9-(MSET).txt b/_pages/en_PT/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/en_PT/Decrypt9-(MSET).txt +++ b/_pages/en_PT/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/F3-(Linux).txt b/_pages/en_PT/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/en_PT/F3-(Linux).txt +++ b/_pages/en_PT/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/en_PT/F3X-(Mac).txt b/_pages/en_PT/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/en_PT/F3X-(Mac).txt +++ b/_pages/en_PT/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/en_PT/H2testw-(Windows).txt b/_pages/en_PT/H2testw-(Windows).txt index 504d17a60..1fedc4170 100644 --- a/_pages/en_PT/H2testw-(Windows).txt +++ b/_pages/en_PT/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt b/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt index b5a35dcf1..3e776d839 100644 --- a/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/en_PT/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/en_PT/Installing-arm9loaderhax.txt b/_pages/en_PT/Installing-arm9loaderhax.txt index 285683ef2..dc05e353f 100644 --- a/_pages/en_PT/Installing-arm9loaderhax.txt +++ b/_pages/en_PT/Installing-arm9loaderhax.txt @@ -51,7 +51,7 @@ Durin' 'tis process, we also setup programs such as th' followin': #### Instructions -##### Section I - Prep work +##### Section I - Set th' sails (prep work) {% capture notice-5 %} **Ensure you are using an SD card that is not corrupted!** @@ -110,6 +110,7 @@ Durin' 'tis process, we also setup programs such as th' followin': + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/en_PT/Move-EmuNAND.txt b/_pages/en_PT/Move-EmuNAND.txt index ecb8b2fce..ed2e33c88 100644 --- a/_pages/en_PT/Move-EmuNAND.txt +++ b/_pages/en_PT/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 23. Press (Start) to reboot! 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installin' arm9loaderhax](installing-arm9loaderhax). diff --git a/_pages/en_PT/Region-Changing.txt b/_pages/en_PT/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/en_PT/Region-Changing.txt +++ b/_pages/en_PT/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/es_ES/9.2.0-ctrtransfer.txt b/_pages/es_ES/9.2.0-ctrtransfer.txt index 92efd7685..e6e0b8539 100644 --- a/_pages/es_ES/9.2.0-ctrtransfer.txt +++ b/_pages/es_ES/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Si antes no tenias tickets que comenzaran con 00-, puedes saltarte esta sección 8. Presiona (B) para rechazar la instalación de tickets desde CDN. 9. Sal presionando el botón HOME +___ + Formatear la consola después de hacer un ctrtransfer *sin restaurar la configuración de la consola* puede causar problemas de brillo o parpadeo en la pantalla. Revisa [esto](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/es_ES/Decrypt9-(Browser).txt b/_pages/es_ES/Decrypt9-(Browser).txt index 632c1794a..bf5e91a3d 100644 --- a/_pages/es_ES/Decrypt9-(Browser).txt +++ b/_pages/es_ES/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Si ya habías hackeado tu 3DS y tienes un CFW basado en EmuNAND, esta guía úni + Si obtienes un error, [sigue esta guía de resolución de problemas](troubleshooting#ts_browser) 5. Si el exploit funcionó, habrás iniciado Decrypt9 +___ + Continúa a [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt b/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt index 69068c56e..111a63623 100644 --- a/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/es_ES/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /es_ES/decrypt9-(homebrew-launcher).html + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar 10. Si el exploit ha funcionado, habrás iniciado Decryp9 +___ + Continúa a [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/Decrypt9-(MSET).txt b/_pages/es_ES/Decrypt9-(MSET).txt index 727de8c2d..c8eff45fc 100644 --- a/_pages/es_ES/Decrypt9-(MSET).txt +++ b/_pages/es_ES/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Si ya habías hackeado tu 3DS y tienes un CFW basado en EmuNAND, esta guía es s 8. Reinicia el sistema, después ve a la "Configuración de la consola", luego "Otras opciones", después "Perfil", y selecciona "Perfil de Nintendo DS" 9. Si el exploit ha funcionado, habrás iniciado Decryp9 +___ + Continúa a [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/F3-(Linux).txt b/_pages/es_ES/F3-(Linux).txt index 3862f0b88..1ca255ec6 100644 --- a/_pages/es_ES/F3-(Linux).txt +++ b/_pages/es_ES/F3-(Linux).txt @@ -51,6 +51,7 @@ Esta página es solo para usuarios de Linux. Si no estás en Linux, revisa las p Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Si la comprobación muestra el resultado `Data LOST: 0.00 Byte (0 sectors)` tu tarjeta SD está bien y puedes borrar todos los archivos `.h2w` de tu tarjeta SD {: .notice--success} diff --git a/_pages/es_ES/F3X-(Mac).txt b/_pages/es_ES/F3X-(Mac).txt index d58b51fb3..6bbe0f12d 100644 --- a/_pages/es_ES/F3X-(Mac).txt +++ b/_pages/es_ES/F3X-(Mac).txt @@ -26,6 +26,8 @@ Esta página es sólo para usuarios de Mac. Si no estás en Mac, revisa las pág 5. Haz clic en "Start Test" 6. Espera hasta que se complete el proceso. +___ + Si la comprobación muestra el resultado `Success! Your card is ok!` tu tarjeta SD está bien y puedes borrar todos los archivos `.h2w` de tu tarjeta SD {: .notice--success} diff --git a/_pages/es_ES/H2testw-(Windows).txt b/_pages/es_ES/H2testw-(Windows).txt index ef3b20da2..41f91d48b 100644 --- a/_pages/es_ES/H2testw-(Windows).txt +++ b/_pages/es_ES/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Esta página es sólo para usuarios de Windows. Si no estás en windows, revisa 8. Haz clic en "Write + Verify" 9. Espera hasta que se complete el proceso +___ + Si la comprobación muestra el resultado `Test finished without errors`, tu tarjeta SD está buen estado y puedes borrar todos los archivos `.h2w` en tu tarjeta SD {: .notice--success} diff --git a/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt b/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt index 122177ae6..aec794306 100644 --- a/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/es_ES/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax es compatible con las versiones 9.0.0 hasta la 11.2.0 en las regiones d + Si se congela, fuerza el apagado de la consola manteniendo presionado el botón para apagarla y luego vuelve a intentar 8. Tu consola debería cargar el Homebrew Launcher +___ + Continúa a [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/es_ES/Installing-arm9loaderhax.txt b/_pages/es_ES/Installing-arm9loaderhax.txt index 42b2d5b3c..3fea8a663 100644 --- a/_pages/es_ES/Installing-arm9loaderhax.txt +++ b/_pages/es_ES/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Durante este proceso, también instalaremos programas como los siguientes: + **"New 3DS CPU" a "Clock+L2(x)"** + Esto aumentará los fotogramas por segundo (FPS) de muchos juegos, pero también podría causar inestabilidad en otros + Si algunos juegos no funcionan correctamente, deshabilita esta opción y vuelve a intentarlo + + ¡Esto hará que el Homebrew Launcher deje de funcionar en 11.3! 4. Presiona (Start) para guardar y reiniciar + Si se te queda la pantalla en negro, simplemente continúa a la siguiente sección + Si aparece el error "Failed to mount CTRNAND", simplemente continúa a la siguiente sección @@ -151,31 +152,33 @@ Si, antes de seguir a esta guía, ya tenías una configuración EmuNAND y deseas 1. Abre Información sobre salud y seguridad (que ahora es FBI) 2. Selecciona "SD" 3. Selecciona "cias" -4. Ve hacia "FBI.cia" y presiona (A) para instalar -5. Ve hacia "hblauncher_loader.cia" y presiona (A) para instalar - + Por favor ten en cuenta que el homebrew launcher no funciona en la versión 11.3.0 - + Se espera que esto sea arreglado pronto -6. Ve hacia "lumaupdater.cia" y presiona (A) para instalar -7. Regresa al directorio de la tarjeta SD con (B) -8. Ve a `arm9loaderhax.bin`, luego presiona (A) en él y selecciona la opción "Copy" -9. Vuelve al menú principal de FBI presionando (B) -10. Selecciona "CTR NAND" -11. Selecciona "\" -12. Selecciona la opción "Paste", luego presiona (A) para confirmar -13. Sal presionando el botón HOME -14. Reinicia tu consola mientras presionas (Start) para entrar a Hourglass9 -15. Ve a "SysNAND Backup/Restore", luego selecciona "Health&Safety Inject" -16. Selecciona `hs.app` (el original que no contiene FBI), luego presiona (A) y confirma para inyectar -17. Presiona (Select) en el menu principal para expulsar tu tarjeta SD -18. Presiona (Start) para reiniciar sin la tarjeta SD +4. Selecciona "\" +5. Selecciona la opción "Install all CIAs", luego presiona (A) para confirmar +6. Regresa al directorio de la tarjeta SD con (B) +7. Ve a `arm9loaderhax.bin`, luego presiona (A) en él y selecciona la opción "Copy" +8. Vuelve al menú principal de FBI presionando (B) +9. Selecciona "CTR NAND" +10. Selecciona "\" +11. Selecciona la opción "Paste", luego presiona (A) para confirmar +12. Sal presionando el botón HOME +13. Inicia el Homebrew Launcher desde el Menú HOME +14. Selecciona "DSP Dump" +15. Presiona (Start) cuando se te solicite para salir +16. Presiona (Start) para abrir el menú de salida del Homebrew Launcher +17. Presiona (A) y luego mantén presionado (Start) para reiniciar y entrar a Hourglass9 +18. Ve a "SysNAND Backup/Restore", luego selecciona "Health&Safety Inject" +19. Selecciona `hs.app` (el original que no contiene FBI), luego presiona (A) y confirma para inyectar +20. Presiona (Select) en el menu principal para expulsar tu tarjeta SD +21. Presiona (Start) para reiniciar sin la tarjeta SD + Encender la consola sin la tarjeta SD al menos una vez te permitirá configurar la instalación de Luma3DS basada en CTRNAND -19. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: +22. Utiliza el botón (A) y las flechas direccionales para activar lo siguiente: + **"Show NAND or user string in System Settings"** -20. Si estás usando una **New 3DS**, puedes *también* activar lo siguiente: +23. Si estás usando una **New 3DS**, puedes *también* activar lo siguiente: + **"New 3DS CPU" a "Clock+L2(x)"** + Esto aumentará los fotogramas por segundo (FPS) de muchos juegos, pero también podría causar inestabilidad en otros + Si algunos juegos no funcionan correctamente, deshabilita esta opción y vuelve a intentarlo -21. ¡Vuelve a insertar la tarjeta SD en la consola, y luego pulsa (Start) para guardar y reiniciar! + + ¡Esto hará que el Homebrew Launcher deje de funcionar en 11.3! +24. ¡Vuelve a insertar la tarjeta SD en la consola, y luego pulsa (Start) para guardar y reiniciar! ___ diff --git a/_pages/es_ES/Move-EmuNAND.txt b/_pages/es_ES/Move-EmuNAND.txt index 1471cae0b..92eac8a73 100644 --- a/_pages/es_ES/Move-EmuNAND.txt +++ b/_pages/es_ES/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Esta es una sección adicional para mover los contenidos de una EmuNAND a la nue 23. ¡Presiona (Start) para reiniciar! 24. Si se queda la pantalla en negro, [sigue esta guía de resolución de problemas](troubleshooting#ts_sys_down) +___ + Vuelve a [Instalar arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/es_ES/Region-Changing.txt b/_pages/es_ES/Region-Changing.txt index bfebbfd25..c83652ebf 100644 --- a/_pages/es_ES/Region-Changing.txt +++ b/_pages/es_ES/Region-Changing.txt @@ -122,6 +122,8 @@ Cambiar de región usando ctrtranfer (lo cual este método utiliza) parece ser l 1. Presiona (Start) y mantén presionado (X) para reiniciar al Decrypt9 de arm9loaderhax 2. Ve a "SysNAND Options", luego "System Save Inject" y selecciona "Inject configsave.bin" +___ + Las Old 3DS / 2DS pueden necesitar un formateo (usando TinyFormat o la Configuración de la consola) para jugar a juegos con el modo de memoria extendida (como Monster Hunter, Super Smash Bros o Pokémon Sol/Luna). {: .notice--info} diff --git a/_pages/fi_FI/9.2.0-ctrtransfer.txt b/_pages/fi_FI/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/fi_FI/9.2.0-ctrtransfer.txt +++ b/_pages/fi_FI/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/fi_FI/Decrypt9-(Browser).txt b/_pages/fi_FI/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/fi_FI/Decrypt9-(Browser).txt +++ b/_pages/fi_FI/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt b/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/fi_FI/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/fi_FI/Decrypt9-(MSET).txt b/_pages/fi_FI/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/fi_FI/Decrypt9-(MSET).txt +++ b/_pages/fi_FI/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/fi_FI/F3-(Linux).txt b/_pages/fi_FI/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/fi_FI/F3-(Linux).txt +++ b/_pages/fi_FI/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/fi_FI/F3X-(Mac).txt b/_pages/fi_FI/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/fi_FI/F3X-(Mac).txt +++ b/_pages/fi_FI/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/fi_FI/H2testw-(Windows).txt b/_pages/fi_FI/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/fi_FI/H2testw-(Windows).txt +++ b/_pages/fi_FI/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/fi_FI/Homebrew-Launcher-(Soundhax).txt b/_pages/fi_FI/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/fi_FI/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/fi_FI/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/fi_FI/Installing-arm9loaderhax.txt b/_pages/fi_FI/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/fi_FI/Installing-arm9loaderhax.txt +++ b/_pages/fi_FI/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/fi_FI/Move-EmuNAND.txt b/_pages/fi_FI/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/fi_FI/Move-EmuNAND.txt +++ b/_pages/fi_FI/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/fi_FI/Region-Changing.txt b/_pages/fi_FI/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/fi_FI/Region-Changing.txt +++ b/_pages/fi_FI/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/fr_FR/9.2.0-ctrtransfer.txt b/_pages/fr_FR/9.2.0-ctrtransfer.txt index 3749dc384..324473ee0 100644 --- a/_pages/fr_FR/9.2.0-ctrtransfer.txt +++ b/_pages/fr_FR/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Si vous n'aviez aucun tickets dont le nom commençait par "00-", vous pouvez pas 8. Appuyez sur (B) pour décliner l'installation de tickets depuis un CDN. 9. Quittez FBI en appuyant sur le bouton Home +___ + Le formatage d'une console après un CTRtransfer *sans restaurer la sauvegarde de la configuration* peut entraîner des problèmes de luminosité / de scintillement de l'écran. Voir [ceci](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/fr_FR/Decrypt9-(Browser).txt b/_pages/fr_FR/Decrypt9-(Browser).txt index 134ca45ca..ed10e0c09 100644 --- a/_pages/fr_FR/Decrypt9-(Browser).txt +++ b/_pages/fr_FR/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E + Si vous rencontrez une erreur, [suivez ce guide de dépannage](troubleshooting#ts_browser) 5. Si l'exploit a réussi, vous devriez avoir démarré dans Decrypt9 +___ + Continuez avec le [downgrade en 2.1.0 (CTRtransfer)](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt b/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt index cae04692d..1dcc28613 100644 --- a/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/fr_FR/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /fr_FR/decrypt9-(homebrew-launcher).html + Si la console freeze (ne répond plus), maintenez le bouton Power quelques secondes pour la forcer à s'éteindre puis réessayez 10. Si l'exploit a réussi, vous devriez avoir démarré dans Decrypt9 +___ + Continuez avec le [downgrade en 2.1.0 (CTRtransfer)](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/fr_FR/Decrypt9-(MSET).txt b/_pages/fr_FR/Decrypt9-(MSET).txt index 41c6bfc64..9c671442c 100644 --- a/_pages/fr_FR/Decrypt9-(MSET).txt +++ b/_pages/fr_FR/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Si vous avez déjà hacké votre console et que vous avez un CFW basé sur une E 8. Redémarrez votre console, allez dans: "Paramètres de la console", puis "Autres paramètres", puis "Profil" et enfin "Profil Nintendo DS" 9. Si l'exploit a réussi vous devriez avoir démarré dans Decrypt9 +___ + Continuez avec le [downgrade en 2.1.0 (CTRtransfer)](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/fr_FR/F3-(Linux).txt b/_pages/fr_FR/F3-(Linux).txt index 3d0e9a3bc..91d337302 100644 --- a/_pages/fr_FR/F3-(Linux).txt +++ b/_pages/fr_FR/F3-(Linux).txt @@ -51,6 +51,7 @@ Cette page est uniquement destinée aux utilisateurs de Linux. Si vous n'êtes p Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Si le test montre comme résultat `Data LOST: 0.00 Byte (0 sectors)`, votre carte SD est saine et vous pouvez supprimer tous les fichiers `.h2w` sur votre carte SD {: .notice--success} diff --git a/_pages/fr_FR/F3X-(Mac).txt b/_pages/fr_FR/F3X-(Mac).txt index 772d5b82b..3853c36f2 100644 --- a/_pages/fr_FR/F3X-(Mac).txt +++ b/_pages/fr_FR/F3X-(Mac).txt @@ -26,6 +26,8 @@ Cette page est pour les utilisateurs de Mac uniquement. Si vous n’êtes pas su 5. Cliquez sur "Start Test" 6. Attendez que le processus soit terminé. +___ + Si le test affiche le résultat `Success! Your card is ok!`votre carte SD est bonne et vous pouvez supprimer tous les fichiers `.h2w` sur la carte SD {: .notice--success} diff --git a/_pages/fr_FR/H2testw-(Windows).txt b/_pages/fr_FR/H2testw-(Windows).txt index 4459f4965..f069dac57 100644 --- a/_pages/fr_FR/H2testw-(Windows).txt +++ b/_pages/fr_FR/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Cette page est pour les utilisateurs de Windows uniquement. Si vous n’êtes pa 8. Cliquez sur "Write + Verify" 9. Attendez que le processus soit terminé +___ + Si le test affiche le résultat `Test finished without errors`, votre carte SD est bonne et vous pouvez supprimer tous les fichiers `.h2w` sur la carte SD {: .notice--success} diff --git a/_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt b/_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt index 8bb290821..def9741d5 100644 --- a/_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/fr_FR/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax est compatible sur les versions comprises entre les firmware 9.0.0 et 1 + Si la console freeze (ne répond plus), forcez-la simplement à s'éteindre on maintenant le bouton Power, puis réessayez 8. Votre console devrait charger le Homebrew launcher +___ + Continuez vers [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/fr_FR/Installing-arm9loaderhax.txt b/_pages/fr_FR/Installing-arm9loaderhax.txt index 99b73c548..07d5a360c 100644 --- a/_pages/fr_FR/Installing-arm9loaderhax.txt +++ b/_pages/fr_FR/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Durant cette étape, nous allons également configurer les programmes suivants : + **"New 3DS CPU" to "Clock+L2(x)"** + Cela augmentera le framerate (image par secondes) dans beaucoup de jeux, mais peut causer des instabilités dans d'autres + Si certains jeux ne fonctionnent pas correctement, désactivez cette option et retentez votre chance + + Attention ! Cela empêche le Homebrew Launcher de fonctionner quand la console est en version 11.3 ! 4. Appuyez sur (Start) pour enregistrer les modifications et redémarrer + Si vous obtenez un écran noir, continuez simplement vers la section suivante + Si vous obtenez une erreur "Failed to mount CTRNAND", continuez simplement vers la section suivante @@ -151,31 +152,33 @@ Si, avant de suivre ce guide, vous aviez déjà installé une EmuNAND et que vou 1. Ouvrez l'application Santé et Sécurité (qui doit maintenant être FBI) 2. Sélectionnez "SD" 3. Sélectionnez "cias" -4. Sélectionnez `FBI.cia` et pressez (A) pour lancer l'installation -5. Sélectionnez `hblauncher_loader.cia` et pressez (A) pour lancer l'installation - + Attention, le Homebrew Launcher ne fonctionne pas en 11.3.0 pour le moment - + Cela devrait être bientôt résolu -6. Sélectionnez `lumaupdater.cia` et pressez (A) pour lancer l'installation -7. Revenez à la racine de la carte SD en pressant (B) -8. Sélectionnez `arm9loaderhax.bin` puis pressez (A) et sélectionnez l'option "Copy" -9. Retournez au menu principal de FBI en appuyant sur (B) -10. Sélectionnez "CTR NAND" -11. Sélectionnez "\" -12. Sélectionnez l'option "Paste" et appuyez sur (A) pour confirmer -13. Quittez FBI en appuyant sur le bouton Home -14. Redémarrez en maintenant (Start) enfoncé pour démarrer Hourglass9 -15. Sélectionnez "SysNAND Backup/Restore", puis "Health&Safety Inject" -16. Sélectionnez `hs.app` (le fichier original qui ne contient pas FBI), puis appuyez sur (A) et confirmez pour l'injecter -17. Appuyez sur (Select) sur le menu principal pour éjecter la carte SD -18. Appuyez sur (Start) pour redémarrer sans la carte SD +4. Sélectionnez "\" +5. Sélectionnez l'option "install all CIAs" (installez toutes les CIAs), appuyez ensuite sur (A) pour confirmer votre choix +6. Revenez à la racine de la carte SD en pressant (B) +7. Sélectionnez `arm9loaderhax.bin` puis pressez (A) et sélectionnez l'option "Copy" +8. Retournez au menu principal de FBI en appuyant sur (B) +9. Sélectionnez "CTR NAND" +10. Sélectionnez "\" +11. Sélectionnez l'option "Paste" et appuyez sur (A) pour confirmer +12. Quittez FBI en appuyant sur le bouton Home +13. Lancez le Homebrew Launcher depuis le menu Home +14. Sélectionnez "DSP Dump" +15. Appuyez sur (Start) quand l'application vous le demande pour la quitter +16. Appuyez sur (Start) pour ouvrir le menu de sortie du Homebrew Launcher +17. Appuyez sur (A) tout en restant appuyé sur (Start) pour redémarrer dans Hourglass9 +18. Sélectionnez "SysNAND Backup/Restore", puis "Health&Safety Inject" +19. Sélectionnez `hs.app` (le fichier original qui ne contient pas FBI), puis appuyez sur (A) et confirmez pour l'injecter +20. Appuyez sur (Select) sur le menu principal pour éjecter la carte SD +21. Appuyez sur (Start) pour redémarrer sans la carte SD + Démarrer la console au moins une fois alors que la carte SD est retirée vous permet de configurer la version de Luma3DS qui est installée dans votre CTRNAND 19. Utilisez le bouton (A) et la croix directionnelle pour activer les éléments suivants : + **"Show NAND or user string in System Settings"** -20. Sur **New 3DS**, vous pouvez *aussi* activer les éléments suivants : +23. Sur **New 3DS**, vous pouvez *aussi* activer les éléments suivants : + **"New 3DS CPU" to "Clock+L2(x)"** + Cela augmentera le framerate (image par secondes) dans beaucoup de jeux, mais peut causer des instabilités dans d'autres + Si certains jeux ne fonctionnent pas correctement, désactivez cette option et retentez votre chance -21. Réinsérez votre carte SD, puis appuyez sur (Start) pour sauvegarder et redémarrer! + + Attention ! Cela empêche le Homebrew Launcher de fonctionner quand la console est en version 11.3 ! +24. Réinsérez votre carte SD, puis appuyez sur (Start) pour sauvegarder et redémarrer! ___ diff --git a/_pages/fr_FR/Move-EmuNAND.txt b/_pages/fr_FR/Move-EmuNAND.txt index 627cf197d..036c7bcb7 100644 --- a/_pages/fr_FR/Move-EmuNAND.txt +++ b/_pages/fr_FR/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Vous allez PERDRE vos sauvegardes GBA VC et DSiWare! 24. Appuyez sur (Start) pour redémarrer! 25. Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#ts_sys_down) +___ + Retournez à l'[installation d'arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/fr_FR/Region-Changing.txt b/_pages/fr_FR/Region-Changing.txt index 2a30caf59..5967bd28e 100644 --- a/_pages/fr_FR/Region-Changing.txt +++ b/_pages/fr_FR/Region-Changing.txt @@ -122,6 +122,8 @@ Changer la région de votre 3DS grâce à un CTRtransfer (ce que fait cette mét 1. Appuyez sur (Start) puis maintenez (X) pour redémarrer en lançant Decrypt9 via arm9loaderhax 2. Sélectionnez "SysNAND Options", puis "System Save Inject", puis "Inject configsave.bin" +___ + Les Old 3DS ou 2DS auront peut être besoin d'être formatées (via TinyFormat ou les Paramètres Système) pour pouvoir jouer aux jeux en mode de mémoire étendue (comme Monster Hunter, Super Smash Bros ou Pokemon Soleil/Lune). {: .notice--info} diff --git a/_pages/he_IL/9.2.0-ctrtransfer.txt b/_pages/he_IL/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/he_IL/9.2.0-ctrtransfer.txt +++ b/_pages/he_IL/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/he_IL/Decrypt9-(Browser).txt b/_pages/he_IL/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/he_IL/Decrypt9-(Browser).txt +++ b/_pages/he_IL/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt b/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/he_IL/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/Decrypt9-(MSET).txt b/_pages/he_IL/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/he_IL/Decrypt9-(MSET).txt +++ b/_pages/he_IL/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/F3-(Linux).txt b/_pages/he_IL/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/he_IL/F3-(Linux).txt +++ b/_pages/he_IL/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/he_IL/F3X-(Mac).txt b/_pages/he_IL/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/he_IL/F3X-(Mac).txt +++ b/_pages/he_IL/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/he_IL/H2testw-(Windows).txt b/_pages/he_IL/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/he_IL/H2testw-(Windows).txt +++ b/_pages/he_IL/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt b/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/he_IL/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/he_IL/Installing-arm9loaderhax.txt b/_pages/he_IL/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/he_IL/Installing-arm9loaderhax.txt +++ b/_pages/he_IL/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/he_IL/Move-EmuNAND.txt b/_pages/he_IL/Move-EmuNAND.txt index 6f7a18da6..0b946d6aa 100644 --- a/_pages/he_IL/Move-EmuNAND.txt +++ b/_pages/he_IL/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 23. Press (Start) to reboot! 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/he_IL/Region-Changing.txt b/_pages/he_IL/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/he_IL/Region-Changing.txt +++ b/_pages/he_IL/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/hu_HU/9.2.0-ctrtransfer.txt b/_pages/hu_HU/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/hu_HU/9.2.0-ctrtransfer.txt +++ b/_pages/hu_HU/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/hu_HU/Decrypt9-(Browser).txt b/_pages/hu_HU/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/hu_HU/Decrypt9-(Browser).txt +++ b/_pages/hu_HU/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt b/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/hu_HU/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/Decrypt9-(MSET).txt b/_pages/hu_HU/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/hu_HU/Decrypt9-(MSET).txt +++ b/_pages/hu_HU/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/F3-(Linux).txt b/_pages/hu_HU/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/hu_HU/F3-(Linux).txt +++ b/_pages/hu_HU/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/hu_HU/F3X-(Mac).txt b/_pages/hu_HU/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/hu_HU/F3X-(Mac).txt +++ b/_pages/hu_HU/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/hu_HU/H2testw-(Windows).txt b/_pages/hu_HU/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/hu_HU/H2testw-(Windows).txt +++ b/_pages/hu_HU/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt b/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/hu_HU/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/hu_HU/Installing-arm9loaderhax.txt b/_pages/hu_HU/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/hu_HU/Installing-arm9loaderhax.txt +++ b/_pages/hu_HU/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/hu_HU/Move-EmuNAND.txt b/_pages/hu_HU/Move-EmuNAND.txt index 6f7a18da6..0b946d6aa 100644 --- a/_pages/hu_HU/Move-EmuNAND.txt +++ b/_pages/hu_HU/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 23. Press (Start) to reboot! 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/hu_HU/Region-Changing.txt b/_pages/hu_HU/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/hu_HU/Region-Changing.txt +++ b/_pages/hu_HU/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/it_IT/9.2.0-ctrtransfer.txt b/_pages/it_IT/9.2.0-ctrtransfer.txt index 240518e87..2a979ed99 100644 --- a/_pages/it_IT/9.2.0-ctrtransfer.txt +++ b/_pages/it_IT/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Se non hai ticket che cominciano con 00-, puoi saltare questa sezione. 8. Premi (B) per rifiutare l'installazione di ticket dal CDN. 9. Esci con il pulsante HOME +___ + Formattare una console appena sottoposta ad un ctrtransfer *senza ripristinare la configurazione di sistema* può causare problemi di luminosità / sfarfallio allo schermo. Nel caso, segui [questo procedimento](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/it_IT/Decrypt9-(Browser).txt b/_pages/it_IT/Decrypt9-(Browser).txt index 7be7d80d8..c15bdadfc 100644 --- a/_pages/it_IT/Decrypt9-(Browser).txt +++ b/_pages/it_IT/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#ts_browser) 5. Se l'exploit è andato a buon fine, si avvierà Decrypt9 +___ + Prosegui con il [ctrtransfer 2.1.0](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt b/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt index 3d87cad91..26ed566ad 100644 --- a/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/it_IT/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /it_IT/decrypt9-(homebrew-launcher).html + Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova 10. Se l'exploit è andato a buon fine, si avvierà Decrypt9 +___ + Prosegui con il [ctrtransfer 2.1.0](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/Decrypt9-(MSET).txt b/_pages/it_IT/Decrypt9-(MSET).txt index d61f3a55f..745e920de 100644 --- a/_pages/it_IT/Decrypt9-(MSET).txt +++ b/_pages/it_IT/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Se hai già modificato il tuo 3DS in passato e hai installato un CFW basato su E 8. Riavvia la console, vai su "Impostazioni della console", quindi in "Impostazioni generali", poi in "Profilo" ed infine in "Profilo Nintendo DS" 9. Se l'exploit è andato a buon fine, si avvierà Decrypt9 +___ + Prosegui con il [ctrtransfer 2.1.0](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/F3-(Linux).txt b/_pages/it_IT/F3-(Linux).txt index e93ec298a..5a84f8bb3 100644 --- a/_pages/it_IT/F3-(Linux).txt +++ b/_pages/it_IT/F3-(Linux).txt @@ -51,6 +51,7 @@ Questa pagina è solo per utenti Linux. Se non sei su Linux, usa [H2testw (windo Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Se il test mostra come risultato `Data LOST: 0.00 Byte (0 sectors)` la tua scheda SD funziona correttamente ed è possibile eliminare tutti i file `.h2w` dalla scheda SD {: .notice--success} diff --git a/_pages/it_IT/F3X-(Mac).txt b/_pages/it_IT/F3X-(Mac).txt index 7e270d01f..338b4adbe 100644 --- a/_pages/it_IT/F3X-(Mac).txt +++ b/_pages/it_IT/F3X-(Mac).txt @@ -26,6 +26,8 @@ Questa pagina è solo per utenti Mac. Se non sei su Mac, usa [H2testw (windows)] 5. Premi "Start Test" 6. Attendi che il processo sia completato. +___ + Se il test mostra come risultato `Success! Your card is ok!` la tua scheda SD funziona correttamente e puoi eliminare tutti i file `.h2w` dalla tua scheda SD {: .notice--success} diff --git a/_pages/it_IT/H2testw-(Windows).txt b/_pages/it_IT/H2testw-(Windows).txt index 4c3941ab8..ef72020e8 100644 --- a/_pages/it_IT/H2testw-(Windows).txt +++ b/_pages/it_IT/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Questa pagina è solo per utenti Windows. Se non sei su Windows, usa [F3 (linux) 8. Clicca su "Write + Verify" 9. Attendi il termine del processo +___ + Se il test mostra come risultato "Test finished without errors", la tua scheda SD funziona correttamente e puoi cancellare tutti i file `.h2w` dalla tua scheda SD {: .notice--success} diff --git a/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt b/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt index 78b30bb56..b5f3a4776 100644 --- a/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/it_IT/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax è compatibile con le versioni del software comprese tra 9.0.0 e 11.2.0 + Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova 8. La console dovrebbe ora avviare l'Homebrew Launcher +___ + Prosegui con [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/it_IT/Installing-arm9loaderhax.txt b/_pages/it_IT/Installing-arm9loaderhax.txt index 7795891bb..3b44c7e34 100644 --- a/_pages/it_IT/Installing-arm9loaderhax.txt +++ b/_pages/it_IT/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni: + **"New 3DS CPU" su "Clock+L2(x)"** + Questa opzione aumenterà il framerate in molti giochi, ma può rendere instabili altri + Se alcuni giochi non dovessero più funzionare correttamente, disabilita questa opzione + + Queste opzioni impediscono l'avvio dell'Homebrew Launcher sulla versione di sistema 11.3! 4. Premi (Start) per salvare e riavviare il 3DS + Se ottieni una schermata nera, prosegui comunque con la prossima sezione + Se ottieni l'errore "Failed to mount CTRNAND", prosegui comunque con la prossima sezione @@ -151,31 +152,33 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e 1. Avvia Informazioni per la salute e la sicurezza (che ora è FBI) 2. Seleziona "SD" 3. Seleziona "cias" -4. Seleziona il file `FBI.cia` e premi (A) per installarlo -5. Seleziona il file `hblauncher_loader.cia` e premi (A) per installarlo - + Tieni presente che al momento l'homebrew launcher non funziona sulla versione di sistema 11.3.0 - + Dovrebbe venire risolto al più presto -6. Seleziona il file `lumaupdater.cia` e premi (A) per installarlo -7. Ritorna alla cartella "SD" premendo (B) -8. Seleziona il file `arm9loaderhax.bin`, quindi premi (A) e seleziona l'opzione "Copy" -9. Ritorna al menu principale di FBI premendo (B) -10. Seleziona "CTR NAND" -11. Seleziona "\" -12. Seleziona l'opzione "Paste", quindi premi (A) per confermare la scelta -13. Esci premendo il pulsante HOME -14. Riavvia la console tenendo premuto (Start) per lanciare Hourglass9 -15. Seleziona "SysNAND Backup/Restore", poi seleziona "Health&Safety Inject" -16. Seleziona `hs.app` (il file originale, che non contiene FBI), poi premi (A) per confermare la sostituzione -17. Premi (Select) nel menu principale per rimuovere la scheda SD -18. Rimuovi la scheda SD, quindi premi (Start) per riavviare la console +4. Seleziona "\" +5. Seleziona l'opzione "Install all CIAs", quindi premi (A) per confermare la scelta +6. Ritorna alla cartella "SD" premendo (B) +7. Seleziona il file `arm9loaderhax.bin`, quindi premi (A) e seleziona l'opzione "Copy" +8. Ritorna al menu principale di FBI premendo (B) +9. Seleziona "CTR NAND" +10. Seleziona "\" +11. Seleziona l'opzione "Paste", quindi premi (A) per confermare la scelta +12. Esci premendo il pulsante HOME +13. Avvia l'Homebrew Launcher dal menu Home +14. Seleziona "DSP Dump" +15. Premi (Start) per uscire quando richiesto +16. Premi (Start) per aprire il menù di uscita dell'Homebrew Launcher +17. Premi (A) mentre tieni premuto il pulsante (Start) per riavviare la console in Hourglass9 +18. Seleziona "SysNAND Backup/Restore", poi seleziona "Health&Safety Inject" +19. Seleziona `hs.app` (il file originale, che non contiene FBI), poi premi (A) per confermare la sostituzione +20. Premi (Select) nel menu principale per rimuovere la scheda SD +21. Rimuovi la scheda SD, quindi premi (Start) per riavviare la console + Il riavvio della console con la scheda SD rimossa permette la configurazione dell'installazione CTRNAND di Luma3DS 19. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni: + **"Show NAND or user string in System Settings"** -20. Se stai utilizzando un **New 3DS**, puoi selezionare *anche*: +23. Se stai utilizzando un **New 3DS**, puoi selezionare *anche*: + **"New 3DS CPU" su "Clock+L2(x)"** + Questa opzione aumenterà il framerate in molti giochi, ma può rendere instabili altri + Se alcuni giochi non dovessero più funzionare correttamente, disabilita questa opzione -21. Reinserisci la scheda SD, quindi premi (Start) per salvare e riavviare la console! + + Queste opzioni impediscono l'avvio dell'Homebrew Launcher sulla versione di sistema 11.3! +24. Reinserisci la scheda SD, quindi premi (Start) per salvare e riavviare la console! ___ diff --git a/_pages/it_IT/Move-EmuNAND.txt b/_pages/it_IT/Move-EmuNAND.txt index 493fbfba0..c594fe6fa 100644 --- a/_pages/it_IT/Move-EmuNAND.txt +++ b/_pages/it_IT/Move-EmuNAND.txt @@ -48,4 +48,6 @@ PERDERAI tutti i salvataggi GBA VC e DSiWare! 23. Premi il pulsante (Start) per riavviare la console! 24. Se ottieni una schermata nera, [segui questa guida per risolvere il problema](troubleshooting#ts_sys_a9lh) +___ + Ritorna all'[Installazione dell'arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/it_IT/Region-Changing.txt b/_pages/it_IT/Region-Changing.txt index 10ed9444a..4a1dfd98b 100644 --- a/_pages/it_IT/Region-Changing.txt +++ b/_pages/it_IT/Region-Changing.txt @@ -122,6 +122,8 @@ Il cambio regione tramite ctrtransfer (effettuato in questa guida) sembra far sm 1. Premi il pulsante (Start) mentre tieni premuto il pulsante (X) per riavviare la console in Decrypt9 tramite arm9loaderhax 2. Seleziona "SysNAND Options", quindi "System Save Inject", ed infine "Inject configsave.bin" +___ + Le console Old 3DS / 2DS potrebbero dover essere formattate (tramite TinyFormat o con le Impostazioni della console) per poter utilizzare la modalità memoria estesa (con ad esempio Monster Hunter, Super Smash Bros o Pokémon Sole/Luna). {: .notice--info} diff --git a/_pages/ja_JP/2.1.0-ctrtransfer.txt b/_pages/ja_JP/2.1.0-ctrtransfer.txt index fd83809e8..34a729b8c 100644 --- a/_pages/ja_JP/2.1.0-ctrtransfer.txt +++ b/_pages/ja_JP/2.1.0-ctrtransfer.txt @@ -16,20 +16,20 @@ ctrtransferの実行後、インストールされていたゲームが正常に **今のところ、2.1.0 ctrtransfer後の手順でインターネット接続が必要です。** {: .notice--warning} -**2.1.0 ctrtransferを実行する前に、3DS本体の「保護者による使用制限機能」を必ず無効にしてください。 パスワードがわからない場合は、[このサイト] (https://mkey.salthax.org/) をご覧ください。** +**2.1.0 ctrtransferを実行する前に、3DS本体の「保護者による使用制限機能」を必ず無効にしてください。 パスワードがわからない場合は、[このサイト] (https://mkey.salthax.org/)をご覧ください。** {: .notice--warning} ** ctrtransferを実行すると、バックアップが復元されるまで、ユーザーがインストールしたすべてのチケット、購入したデジタルゲーム等が一時的にが本体から削除されます。 何があっても、バックアップの作成をおねがいします。** {: .notice--danger} -**バージョン6.0.0以下で2DSでは本体が壊れる為絶対に初期化しないで下さい。 +**バージョン6.0.0以下で2DSでは本体が壊れる為絶対に初期化しないで下さい。** {: .notice--danger} -** New 3DSで2.1.0へのダウングレード後はシステム設定から更新を実行すると3DSが壊れるのでご注意下さい。 NANDのバックアップを復元してから更新を行うようにして下さい。 +** New 3DSで2.1.0へのダウングレード後は本体設定から更新を実行すると3DSが壊れるのでご注意下さい。 NANDのバックアップを復元してから更新を行うようにして下さい。** {: .notice--danger} {% capture notice %} -**2.1.0のNew 3DSをスリープモード（3DSを折りたたむと、自動的にスリープモードになる。）にすると完全に壊れるの絶対にしないで下さい。 +**2.1.0のNew 3DSをスリープモード（3DSを折りたたむと、自動的にスリープモードになる。）にすると完全に壊れるの絶対にしないで下さい！** **3DSを折りたたんだ直後に壊れます。普通に電源ボタンでオフするのは壊れません。 ** **スリープモードになるのは3DSを折りたたんだ時だけですので、 それをせずに時間が経ってもスリープモードになりません。** **2.1.0バージョンへのダウングレードを実行したら、ためらわず進んでこういう可能性を避けてください！** @@ -37,13 +37,13 @@ ctrtransferの実行後、インストールされていたゲームが正常に
{{ notice | markdownify }}
-####ステップの概要 +#### ステップの概要 -このステップでは、本体のシステム、[CTRNAND] (https://www.3dbrew.org/wiki/Flash_Filesystem#CTR_partition) を一時的に取り除いて改造ファイルを上書きするために2.1.0バージョンへダウングレードして、個人個人違う[OTP] (https://www.3dbrew.org/wiki/OTP_Registers)のファイルを解凍します。 このOTPファイルはarm9loaderhaxをインストールするために必要です。他の本体では**利用できません**。 +このステップでは、本体のシステム、[CTRNAND](https://www.3dbrew.org/wiki/Flash_Filesystem#CTR_partition) を一時的に取り除いて改造ファイルを上書きするために2.1.0バージョンへダウングレードして、個人個人違う[OTP](https://www.3dbrew.org/wiki/OTP_Registers)のファイルを解凍します。 このOTPファイルはarm9loaderhaxをインストールするために必要です。他の本体では**利用できません**。 -これは本体の固有ファイル(`moveable.sed`や`SecureInfo_A`等)をコピーしながら2.1.0の[ctrtransferのイメージをインストール](https://www.reddit.com/r/3dshacks/comments/4zhe4a/) して、タイトルデータベースを一致することで上書きが可能になります。 +これは本体の固有ファイル（`moveable.sed`や`SecureInfo_A`等）をコピーしながら2.1.0の[ctrtransferのイメージをインストール](https://www.reddit.com/r/3dshacks/comments/4zhe4a/) して、タイトルデータベースを一致することで上書きが可能になります。 -####必要なファイル +#### 必要なファイル * decrypt9がインストールされた本体 * 本体に合ったリージョンの2.1.0ctrtransfer イメージ @@ -98,7 +98,7 @@ ___ {: .notice--info} {% capture notice %} -**2.1.0のNew 3DSをスリープモード（3DSを折りたたむと、自動的にスリープモードになる。）にすると完全に壊れるの絶対にしないで下さい。 +**2.1.0のNew 3DSをスリープモード（3DSを折りたたむと、自動的にスリープモードになる。）にすると完全に壊れるの絶対にしないで下さい！** **3DSを折りたたんだ直後に壊れます。普通に電源ボタンでオフするのは壊れません。 ** **スリープモードになるのは3DSを折りたたんだ時だけですので、 それをせずに時間が経ってもスリープモードになりません。** **ためらわず進んでこういう可能性を避けてください！** diff --git a/_pages/ja_JP/9.2.0-ctrtransfer.txt b/_pages/ja_JP/9.2.0-ctrtransfer.txt index a31cc8fbb..05906f1dd 100644 --- a/_pages/ja_JP/9.2.0-ctrtransfer.txt +++ b/_pages/ja_JP/9.2.0-ctrtransfer.txt @@ -4,7 +4,7 @@ lang: ja permalink: /ja_JP/9.2.0-ctrtransfer.html --- -2.1.0にダウングレードしたのに何らかの理由で**機能的なNANDバックアップ**がない場合、このガイドはあなたのためのものです。 +2.1.0にダウングレードしたのに何らかの理由で**有効なNANDバックアップ**がない場合、このガイドはあなたのためのものです。 {: .notice--success} あなたのデバイスは、ctrtransferの後にあなたのインストールされたゲームを表示しないかもしれません。 これはチケットが転送によって削除されたためです。そのため、チケットをバックアップしています。彼らはガイドの最後に復元されます。 彼らはガイドの最後に復元されます。 @@ -29,24 +29,24 @@ permalink: /ja_JP/9.2.0-ctrtransfer.html #### 手順 -##### セクション１ -　準備 +##### セクション I -　準備 1. GodMode9 `.zip`から`GodMode9.bin`をあなたのSDカードの`/luma/payloads/`フォルダにコピーして、`/luma/payloads/`の中にある`GodMode9.bin`の名前を`up_GodMode9.bin`に変更します 2. 9.2.0 ctrtransfer image `.bin`と`.bin.sha`をctrtransfer `.zip`からSDカードの`/files9/`フォルダにコピーします 3. `Decrypt9WIP.bin`をSDカードの`/luma/payloads/`フォルダにコピーし、`Decrypt9WIP.bin`の名前を`x_Decrypt9WIP.bin`に変更します 4. 3DSにSDカードを入れます -### セクション II - バックアップチケットと設定の保存 +### セクション II - チケットのバックアップと設定の保存 1. ブート中に (X) を押してarm9loaderhaxからDecrypt9を起動します 2. 「Ticket/Titlekey Options」に行って、「Ticket Dump (SysNAND)」を選択します 3. (Select) を押してSDカードを取り外してパソコンに入れます 4. `/files9/`フォルダにある名前が「00-」で始まら**ない**`.tik`ファイルを全て削除します - + 名前が"00-"で始まるファイルがない場合、全部削除してください + + 名前が「00-」で始まるファイルがない場合、全部削除してください 5. 3DSにSDカードを入れ、(B) を押してMain Menuに戻ります 6. 「SysNAND Options」に行って、そして「System Save Dump」に行って、「Dump configsave.bin」を選択します -##### セクション３- ctrtransfer +##### セクション III- ctrtransfer 1. 「SysNAND Options」に行って、そして「CTRNAND Transfer」に、そして「Auto CTRNAND Transfer」に行きます 2. 表示しているキーコンボを入力し、ヒントが出るとき (A) を押すことで9.2.0 ctrtransferイメージを選択します @@ -88,11 +88,13 @@ permalink: /ja_JP/9.2.0-ctrtransfer.html 3. 「file9」を選択します 4. 「\」を選択します 5. 「Install and delete all tickets」を選択します -6. 待ちます。システムはフリーズことがあります。 システムはフリーズすることがあります。 +6. 待ちます。 システムはフリーズすることがあります。 7. (A) を押して確認します 8. (B) を押してCDNからチケットをインストールしないようにします 9. ホームボタンで終了します +___ + ctrtransferの直後に*設定ファイルを復元せずに*デバイスをフォーマットすると、画面に明るさ·点滅の問題が生じることがあります。 詳しくは[こちら](https://github.com/Plailect/Guide/issues/794)。 {: .notice--info} diff --git a/_pages/ja_JP/Decrypt9-(Browser).txt b/_pages/ja_JP/Decrypt9-(Browser).txt index 747c06a1c..29311456c 100644 --- a/_pages/ja_JP/Decrypt9-(Browser).txt +++ b/_pages/ja_JP/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ permalink: /ja_JPdecrypt9-(browser).html + エラーが発生すれば、[このトラブルシューティングガイドをご覧ください](troubleshooting#ts_browser) 5. 成功すれば、Decrypt9が起動します +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)に続く {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt b/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt index 47998d084..541f9b598 100644 --- a/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ja_JP/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /ja_JP/decrypt9-(homebrew-launcher).html + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください 10. 成功すれば、Decrypt9が起動します +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)に続く {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/Decrypt9-(MSET).txt b/_pages/ja_JP/Decrypt9-(MSET).txt index dffec8bc2..2175d5c65 100644 --- a/_pages/ja_JP/Decrypt9-(MSET).txt +++ b/_pages/ja_JP/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ permalink: /ja_JP/decrypt9-(mset).html 8. システムを再起動して、本体設定に行って、「その他の設定」に、そして「ユーザー情報」に、「ニンテンドーDS情報」に行きます 9. 成功すれば、Decrypt9が起動します +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)に続く {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/F3-(Linux).txt b/_pages/ja_JP/F3-(Linux).txt index 96ad3a68b..a8cb1a04f 100644 --- a/_pages/ja_JP/F3-(Linux).txt +++ b/_pages/ja_JP/F3-(Linux).txt @@ -35,7 +35,7 @@ SDカードのサイズとコンピュータのパフォーマンスによって Free space: 0.00 Byte Average Writing speed: 4.90 MB/s -8. `./f3read `を実行します +8. `./f3read `を実行します 9. 処理が完了するまで待ちます。 下記はサンプル出力です。 $ ./f3read /media/michel/6135-3363/ @@ -51,6 +51,7 @@ SDカードのサイズとコンピュータのパフォーマンスによって Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ 処理結果は`Data LOST: 0.00 Byte (0 sectors)`であれば、SDカードが正常であることを示します。SDカード上の`.h2w`ファイルを全て削除できます。 {: .notice--success} diff --git a/_pages/ja_JP/F3X-(Mac).txt b/_pages/ja_JP/F3X-(Mac).txt index 68ff89e18..a62156592 100644 --- a/_pages/ja_JP/F3X-(Mac).txt +++ b/_pages/ja_JP/F3X-(Mac).txt @@ -26,6 +26,8 @@ SDカードのサイズとコンピュータのパフォーマンスによって 5. 「Start Test」をクリックします 6. 処理が完了するまで待ちます +___ + 結果は「Success! Your card is ok!」であれば、SDカードは正常であることを示します。SDカード上の`.h2w`ファイルを全て削除できます。 {: .notice--success} diff --git a/_pages/ja_JP/Get-Started-(New-3DS).txt b/_pages/ja_JP/Get-Started-(New-3DS).txt index 18ee10ea9..5e8f68c6b 100644 --- a/_pages/ja_JP/Get-Started-(New-3DS).txt +++ b/_pages/ja_JP/Get-Started-(New-3DS).txt @@ -1,7 +1,7 @@ --- title: "導入(New3DS)" -lang: にほんご -引用元: /get-started-(new-3ds).html +lang: ja +permalink: /ja_JP/get-started-(new-3ds).html --- 下の表からあなたのバージョンに合ったページを選択してください。 diff --git a/_pages/ja_JP/Get-Started-(Old-3DS).txt b/_pages/ja_JP/Get-Started-(Old-3DS).txt index d419008bf..d532a48d9 100644 --- a/_pages/ja_JP/Get-Started-(Old-3DS).txt +++ b/_pages/ja_JP/Get-Started-(Old-3DS).txt @@ -86,10 +86,5 @@ permalink: /ja_JP/get-started-(old-3ds).html - - - - -
11.3.0 -
11.3.011.3.0-
\ No newline at end of file diff --git a/_pages/ja_JP/H2testw-(Windows).txt b/_pages/ja_JP/H2testw-(Windows).txt index ad1bc6b03..aec1c54e2 100644 --- a/_pages/ja_JP/H2testw-(Windows).txt +++ b/_pages/ja_JP/H2testw-(Windows).txt @@ -10,7 +10,7 @@ permalink: /ja_JP/h2testw-(windows).html SDカードのサイズとコンピュータのパフォーマンスによって、かかる時間は異なり、数時間もかかる場合があります！ {: .notice--info} -このページはWindowsユーザー向けです。 Linuxを使用しないユーザーは、[F3 (linux)](f3-(linux))または[F3X (mac)](f3x-(mac))をご覧ください。 +このページはWindowsユーザー向けです。 Windowsを使用しないユーザーは、[F3 (linux)](f3-(linux))または[F3X (mac)](f3x-(mac))をご覧ください。 {: .notice--info} #### 必要なもの @@ -29,6 +29,8 @@ SDカードのサイズとコンピュータのパフォーマンスによって 8. 「Write + Verify」をクリックします 9. 処理が完了するまで待ちます +___ + 処理結果は`Test finished without errors`であれば、SDカードが正常であることを示します。SDカード上の`.h2w`ファイルを全て削除できます。 {: .notice--success} diff --git a/_pages/ja_JP/Home.txt b/_pages/ja_JP/Home.txt index f00426826..146e317a0 100644 --- a/_pages/ja_JP/Home.txt +++ b/_pages/ja_JP/Home.txt @@ -6,7 +6,7 @@ header: overlay_image: images/home-page-feature.jpg overlay_filter: 0.5 cta_label: "はじめる" # - cta_url: "get-started" # + cta_url: "/ja_JP/get-started" # caption: excerpt: "3DSのCFW導入ガイド
公式ファームウェアからarm9loaderhaxまで。
" # lang: ja @@ -23,10 +23,10 @@ permalink: /ja_JP/index.html **このサイトの[マグネットリンク](https://en.wikipedia.org/wiki/Magnet_URI_scheme)を使用するには、[Deluge](http://dev.deluge-torrent.org/wiki/Download)のようなTorrentクライアントが必要です！** {: .notice--info} -** このサイトは*あなた*の[翻訳] (https://translate.3ds.guide/) による支援を求めています。** +** このサイトは*あなた*の[翻訳](https://translate.3ds.guide/)による支援を求めています。** {: .notice--success} -**このガイドでは、 [these](https://3ds.guide/rss.xml)をシードしていただける方を募集しています** +**このガイドでは、 [トレントファイル](https://3ds.guide/rss.xml)をシードしていただける方を募集しています** {: .notice--success} **実践する前に、紹介されているすべてのページをお読みください。** @@ -40,9 +40,9 @@ permalink: /ja_JP/index.html ## カスタムファームウェアとは -* * カスタム ファームウェア * * ("CFW") は高度な技術によりHomebrewでは実現できないようなハッキングを実現しています。 例えば「署名回避パッチ」は、署名のない、許可されていないソフトをHOMEメニューにインストールできます。 +**カスタム ファームウェア** ("CFW") は高度な技術によりHomebrewでは実現できないようなハッキングを実現しています。 例えば「署名回避パッチ」は、署名のない、許可されていないソフトをHOMEメニューにインストールできます。 -CFW は、本体バージョンが11.2.0以下であれば簡単に導入できます。 +CFWは、本体バージョンが11.2.0以下であれば簡単に導入できます。 ## ごのガイドでインストールされるもの @@ -55,25 +55,25 @@ Arm9loaderhaxは、WiiにおけるBootMiiと似た、起動からわずか数ミ ## カスタムファームウェアでできること -リージョンに関係なく、すべてのゲームカードやダウンロードソフトを遊ぶ -+ ユーザー作成の [自作テーマ] (https://3dsthem.es/) と [自作バッジ] (https://badges.3dsthem.es/) でHOMEメニューをカスタマイズ ++ 地域に関係なく、すべてのゲームカードやダウンロードソフトを遊ぶ ++ ユーザー作成の [自作テーマ](https://3dsthem.es/) と [自作バッジ](https://badges.3dsthem.es/) でHOMEメニューをカスタマイズ + 自分が所有するゲームに「ROMハック」を使用する + ゲームとアプリケーションのスクリーン ショットを取る事ができます。 -+ セーブデータの[バックアップ、編集、復元] (https://gbatemp.net/threads/release-jks-savemanager-homebrew-cia-save-manager.413143/) ++ セーブデータの[バックアップ、編集、復元](https://gbatemp.net/threads/release-jks-savemanager-homebrew-cia-save-manager.413143/) + RetroArchを始めとしたエミュレータでレトロゲームを遊ぶ (Newニンテンドー3DS上ではさらに快適に動作します) + HomeBrewをインストールし、HOMEメニューから直接実行 + ゲームカードをインストール可能な形式で吸い出し、ゲームカードを使用せず遊ぶ -+New 3DSのみ: NTR CFWを使用し、ゲーム画面をPCに無線ストリーミング ++ New 3DSのみ: NTR CFWを使用し、ゲーム画面をPCに無線ストリーミング + 本体更新により対策されたDSマジコンを起動 + 自作ソフトが起動可能な状態を維持して本体更新 ## 改造する前の注意点 -+ * * ガイドを始める前に、あなたの3DSが復元不可能なBRICK状態になるリスクが有ることを忘れないでください。 稀ではありますが、BRICKする可能性があります。必ず全ての指示に従ってください。 ++ ** ガイドを始める前に、あなたの3DSが復元不可能なBRICK状態になるリスクが有ることを忘れないでください。 稀ではありますが、BRICKする可能性があります。必ず全ての指示に従ってください。** + 既にEmuNANDが3DSに導入されていて、以前のEmuNANDの内容を新しいSysNAND CFWに移行したい場合、あなたは全ての指示に従ってください。[arm9loaderhaxをインストールする](installing-arm9loaderhax) のページで、既存のEmuNANDをSysNANDにリストアするよう促す案内が表示されます。 + このガイドは、ファームウェア11.2.0以下において、全てのリージョン *(CHN / TWNを除く)* のNew 3DS、旧3DS、および2DS上で動作します。 すべてが計画通りに進めば、データは全く失われず、導入前にあなたが使用していたすべてのもの (ゲーム、NNID、セーブデータなど) が保持されます。 予期しない電源オフによるデータの損失や損傷を避けるため、導入作業は本体に充電プラグを差し込んだまま行ってください！ -+ 使用するSDカードは [GPTではなく、MBR](http://www.howtogeek.com/245610/) でフォーマットされている必要があります (3DSに付属のSDカードはデフォルトでMBRです) 。 ++ 使用するSDカードは[GPTではなく、MBR](http://www.howtogeek.com/245610/)でフォーマットされている必要があります（3DSに付属のSDカードはデフォルトでMBRです）。 + SDカードをフォーマットする必要がある場合は、[`guiformat`](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) を使用することができます。アロケーションユニットサイズは32Kを指定してください。 + 2DSはソフトウェア面ではOld 3DSと本質的に同じであり、"Old 3DS"で行うステップは2DSにも適用されます。 diff --git a/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt b/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt index f572b16a8..547284b82 100644 --- a/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ja_JP/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHaxは、EUR、JPN、KOR、USAリージョンのバージョン9.0.0〜11.2 + 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください 8. Homebrew Launcherがロードされます +___ + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) へ続く {: .notice--primary} \ No newline at end of file diff --git a/_pages/ja_JP/Installing-arm9loaderhax.txt b/_pages/ja_JP/Installing-arm9loaderhax.txt index 7658342ca..a25bd7652 100644 --- a/_pages/ja_JP/Installing-arm9loaderhax.txt +++ b/_pages/ja_JP/Installing-arm9loaderhax.txt @@ -16,7 +16,7 @@ arm9loaderhaxからペイロードを起動する機能もセットアップし **別のデバイスのOTPを使うと、デバイスを絶対に壊しますので、やめてください。** {: .notice--danger} -####ステップの概要 +#### ステップの概要 このセクションでは、ここまでした努力が目指していた目標を遂げます：実際にarm9loaderhaxをインストールします。 @@ -39,7 +39,7 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし * - [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * - [`fbi-2.4.2-injectable.zip`](magnet:?xt=urn:btih:f978b4cf5eda72823240b9c649f3fd2940a9f525&dn=fbi-2.4.2-injectable.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) * - [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) -* [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *（`.7z`ファイル）の最新フォーク +* [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *（`.7z`ファイル）*の最新フォーク * [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest)*（`.7z`ファイル）*の最新バージョン * [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *（`.7z` ファイル）*の最新バージョン * [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)の最新バージョン @@ -92,7 +92,7 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし + 画面が点滅する場合、[このトラブルシューティングガイドをご覧ください](troubleshooting#ts_safe_a9lh_screen) + 「無線接続」がオフの場合、バッテリーを外し、チャージャーも外し、しばらく置いてから起動することでオンにできます 4. (Select) を押して「Full Install」を行います -5. インストーラーはデバイスにarm9loaderhaxをインストールします（すぐ終わるはずです） +5. インストーラーはデバイスにarm9loaderhaxをインストールします（すぐに終わるはずです） 6. いずれかのボタンを押してデバイスをシャットダウンします 7. SDカードの`/a9lh/`からご使用のデバイス専用の`otp.bin`ファイルをパソコンの安全な場所にコピーし、複数の場所（例えば、オンラインストレージサービス）にバックアップします。SDカードをデバイスに入れます @@ -110,6 +110,7 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし + **「New 3DS CPU」で「Clock+L2(x)」を選択してください** + これによって、多くのゲームのフレームレートを高くしますが、一部のゲームを不安定にしてしまいます + ゲームに不具合があれば、このオプションを無効にしてもう一度確認してください + + これを有効にすると、11.3ではHomebrew Launcherが起動できなくなります！ 4. (Start) を押してセーブして再起動します + ブラックスクリーンになる場合でも、次のセクションに続行してください + 「Failed to mount CTRNAND」というエラーが発生する場合でも、次のセクションに続行してください @@ -151,31 +152,33 @@ arm9loaderhaxをインストールし、Luma3DSを正しくセットアップし 1. 「安全に使用するために」（現在はFBI）を起動します 2. 「SD」を選択します 3. 「cias」を選択します -4. 「FBI.cia」を見つかって、(A) を押してインストールします -5. 「hblauncher_loader.cia」を見つかって、(A) を押してインストールします - + 11.3.0ではhomebrew launcherが機能しません - + すぐに修正してもらえるはずです -6. 「lumaupdater.cia」を見つかって、(A) を押してインストールします -7. (B) を押して、SDディレクトリに戻ります -8. 「arm9loaderhax.bin」を見つかって、(A) を押して「Copy」オプションを選択します -9. (B) を押してFBIのメインメニューに戻ります -10. 「CTR NAND」を選択します -11. 「\」を選択します -12. 「Paste」オプションを選択して、(A) を押して確認します -13. ホームボタンを押して終了します -14. 再起動し、デバイスのブート中、(Start) を長押ししてHourglass9に移動します -15. 「SysNAND Backup/Restore」に行って、「Health&Safety Inject」を選択します -16. 「hs.app」（FBIを含まないオリジナルの方）を選択して、(A) を押して注入を確認します -17. メインメニューで (Select) を押してSDカードを取り外します -18. (Start) を押してSDカードを外したまま再起動します +4. 「\」を選択します +5. 「Install all CIAs」オプションを選択して、(A) を押して確認します +6. (B) を押して、SDディレクトリに戻ります +7. 「arm9loaderhax.bin」を見つかって、(A) を押して「Copy」オプションを選択します +8. (B) を押してFBIのメインメニューに戻ります +9. 「CTR NAND」を選択します +10. 「\」を選択します +11. 「Paste」オプションを選択して、(A) を押して確認します +12. ホームボタンを押して終了します +13. ホームメニューでHomebrew Launcherを起動します +14. 「DSP Dump」を選択します +15. ヒントが出る時、(Start) を押して終了します +16. (Start) を押してHomebrew Launcherの終了メニューを開きます +17. (Start) を押したまま (A) を押して再起動します。Hourglass9を起動します +18. 「SysNAND Backup/Restore」に行って、「Health&Safety Inject」を選択します +19. 「hs.app」（FBIを含まないオリジナルの方）を選択して、(A) を押して注入を確認します +20. メインメニューで (Select) を押してSDカードを取り外します +21. (Start) を押してSDカードを外したまま再起動します + 少なくとも一回だけSDカードなしでデバイスを起動すると、CTRNAND based Luma3DSインストールを設定できるようになります -19. (A) と上下左右ボタンを使用し、次のアイテムを有効にします： +22. (A) と上下左右ボタンを使用し、次のアイテムを有効にします： + **「Show NAND or user string in System Settings」** -20. **New 3DS**をご使用の場合、次のアイテムも有効にできます： +23. **New 3DS**をご使用の場合、次のアイテムも有効にできます： + **「New 3DS CPU」で「Clock+L2(x)」を選択してください** + これによって、多くのゲームのフレームレートを高くしますが、一部のゲームを不安定にしてしまいます + ゲームに不具合があれば、このオプションを無効にしてもう一度確認してください -21. SDをデバイスに入れて (Start) を押し、セーブして再起動します！ + + これを有効にすると、11.3ではHomebrew Launcherが起動できなくなります！ +24. SDをデバイスに入れて (Start) を押し、セーブして再起動します！ ___ diff --git a/_pages/ja_JP/Move-EmuNAND.txt b/_pages/ja_JP/Move-EmuNAND.txt index b39dfcf31..1bc9842e8 100644 --- a/_pages/ja_JP/Move-EmuNAND.txt +++ b/_pages/ja_JP/Move-EmuNAND.txt @@ -48,4 +48,6 @@ permalink: /ja_JP/move-emunand.html 23. (Start) を押して再起動！ 24. ブラックスクリーンになってしまったら、[このトラブルシューティングガイドをご覧ください](troubleshooting#ts_sys_down) +___ + [arm9loaderhaxをインストールする](installing-arm9loaderhax)に戻る。 diff --git a/_pages/ja_JP/Region-Changing.txt b/_pages/ja_JP/Region-Changing.txt index 7f1110e5f..04a9729e4 100644 --- a/_pages/ja_JP/Region-Changing.txt +++ b/_pages/ja_JP/Region-Changing.txt @@ -73,7 +73,7 @@ permalink: /ja_JP/region-changing.html 7. コピーをしたら、SDカードの`/files9/`フォルダから9.2.0 ctrtransfer image `.bin`と`.bin.sha`を削除します 8. 3DSにSDカードを入れます -##### セクション IV - SecureInfoを編集します +##### セクション IV - SecureInfoを編集する 1. (Start) を押して (Up) を長押ししてarm9loaderhax GodMode9を起動します 2. `SYSNAND CTRNAND` -> `rw` -> `sys`まで移動します @@ -90,9 +90,9 @@ permalink: /ja_JP/region-changing.html 13. ライン00000100の始まりに移動し、そこに (A) を押します 14. (Up) または (Down) を押したまま (A) を押してその数字を変更します 15. ライン00000100の最初の二つの数字*変更したい地域*の数字に変更します： - - "00" : JPN - - "01" : USA - - "02" : EUR + - 「00」：JPN + - 「01」：USA + - 「02」：EUR 16. (B) を押して編集モードを終了し、(B) をもう一回押してディレクトリに戻ります 17. 全ての手順は正常に終わったら、`SecureInfo_A`と`SecureInfo_C`は見えます。 （Luma3DSは`SecureInfo_C`を検出すれば、それを`SecureInfo_A`の代わりに使用します） 18. (Start) を押して再起動します @@ -122,6 +122,8 @@ permalink: /ja_JP/region-changing.html 1. (Start) を押して (X) を長押ししてarm9loaderhax Decrypt9を起動します 2. 「SysNAND Options」に行って、そして「System Save Inject」に、そして「Inject configsave.bin」を選択します +___ + Old 3DSまたは2DSは拡張メモリーモードを使用するゲーム（例えば、モンスターハンター、スーパースマッシュブラザーズおよびポケモンサン・ムーン）をプレイするには、TinyFormatまたは本体設定でデバイスを初期化しなければならないことがあります。 {: .notice--info} diff --git a/_pages/ja_JP/Troubleshooting.txt b/_pages/ja_JP/Troubleshooting.txt index 6a3db0976..124738d3f 100644 --- a/_pages/ja_JP/Troubleshooting.txt +++ b/_pages/ja_JP/Troubleshooting.txt @@ -62,7 +62,7 @@ permalink: /ja_JP/troubleshooting.html 9. (Start) を押して再起動します ## Gatewayでダウングレードしたデバイスでは「安全に使用するために」アプリを注入できない -その原因は、Gatewayのダウングレード方法に大きな不具合があって、システムにアプリそれぞれ二つのバージョンを残ってしまいました。 二つのバージョンの一つは使用されませんが、Decrypt9はどっちが正しいのか分からなくて、未使用のバージョンに注入してしまいました。 +その原因は、Gatewayのダウングレード方法に大きな不具合があって、システムにアプリそれぞれ二つのバージョンを残してしまいました。 二つのバージョンの一つは使用されませんが、Decrypt9はどっちが正しいのか分からなくて、未使用のバージョンに注入してしまいました。 #### 必要なもの diff --git a/_pages/ko_KR/9.2.0-ctrtransfer.txt b/_pages/ko_KR/9.2.0-ctrtransfer.txt index c26d30eed..4af2c5a1c 100644 --- a/_pages/ko_KR/9.2.0-ctrtransfer.txt +++ b/_pages/ko_KR/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ permalink: /ko_KR/9.2.0-ctrtransfer.html 8. (B) 버튼을 눌러 CDN에서 티켓 설치를 거절하세요. 9. 홈 버튼을 눌러 빠져나오세요. +___ + ctrtransfer 과정을 거친 기기를 *config save 복원 없이* 포맷하면 화면 밝기 / 화면 깜빡임 오류가 나타날 수 있습니다. [이 링크](https://github.com/Plailect/Guide/issues/794)를 참고하세요. {: .notice--info} diff --git a/_pages/ko_KR/Decrypt9-(Browser).txt b/_pages/ko_KR/Decrypt9-(Browser).txt index 8e483e25f..18d7895e0 100644 --- a/_pages/ko_KR/Decrypt9-(Browser).txt +++ b/_pages/ko_KR/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ permalink: /ko_KR/decrypt9-(browser).html + 오류가 발생하면 [이 문제 해결 가이드](troubleshooting#ts_browser)를 참고하세요. 5. 익스플로잇이 성공하면 Decrypt9이 실행됩니다. +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)로 이어집니다. {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt b/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt index 1e6508555..c9e916e38 100644 --- a/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ko_KR/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /ko_KR/decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. 익스플로잇이 성공하면 Decrypt9이 실행됩니다. +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)로 이어집니다. {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/Decrypt9-(MSET).txt b/_pages/ko_KR/Decrypt9-(MSET).txt index 91e46bd58..816d510c5 100644 --- a/_pages/ko_KR/Decrypt9-(MSET).txt +++ b/_pages/ko_KR/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ permalink: /ko_KR/decrypt9-(mset).html 8. 재시작한 다음 본체 설정으로 가서 "기타 설정", "유저 정보", "DS 소프트웨어용 설정"을 차례로 선택하세요. 9. 익스플로잇이 성공하면 Decrypt9이 실행됩니다. +___ + [2.1.0 ctrtransfer](2.1.0-ctrtransfer)로 이어집니다. {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/F3-(Linux).txt b/_pages/ko_KR/F3-(Linux).txt index 73b393d82..e382f34f4 100644 --- a/_pages/ko_KR/F3-(Linux).txt +++ b/_pages/ko_KR/F3-(Linux).txt @@ -51,6 +51,7 @@ SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ 테스트 결과가 `Data LOST: 0.00 Byte (0 sectors)`로 나오면 SD 카드 상태가 정상이며 SD 카드 안의 모든 `.h2w` 파일들을 삭제해도 됩니다. {: .notice--success} diff --git a/_pages/ko_KR/F3X-(Mac).txt b/_pages/ko_KR/F3X-(Mac).txt index 69de25c68..f595dc51b 100644 --- a/_pages/ko_KR/F3X-(Mac).txt +++ b/_pages/ko_KR/F3X-(Mac).txt @@ -26,6 +26,8 @@ SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 5. "Start Test"를 누르세요. 6. 완료될 때까지 기다리세요. +___ + 테스트 결과가 `Success! Your card is ok!`로 나오면 SD 카드가 정상이며 SD 카드 안의 모든 `.h2w` 파일들을 삭제해도 됩니다. {: .notice--success} diff --git a/_pages/ko_KR/H2testw-(Windows).txt b/_pages/ko_KR/H2testw-(Windows).txt index 9b823b09c..06d9d3ea6 100644 --- a/_pages/ko_KR/H2testw-(Windows).txt +++ b/_pages/ko_KR/H2testw-(Windows).txt @@ -29,6 +29,8 @@ SD 카드의 용량과 컴퓨터의 속도에 따라 최대 몇 시간이 걸릴 8. "Write + Verify" 를 클릭하세요. 9. 완료될 때까지 기다리세요. +___ + 테스트 결과가 `Test finished without errors`로 나오면 SD 카드가 정상이며 SD 카드 안의 모든 `.h2w` 파일들을 삭제해도 됩니다. {: .notice--success} diff --git a/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt b/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt index ed9fea99c..03b528826 100644 --- a/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ko_KR/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax는 EUR, JPN, USA, KOR 지역의 9.0.0~11.2.0 버전에서 사용이 가 + 재생중 화면이 멈출 경우 전원 버튼을 길게 눌러서 기기를 강제로 종료시킨 후 재시도 하세요. 8. 성공하면 홈브류 런처가 실행될 것입니다. +___ + [Decrypt9 (홈브류 런처)](decrypt9-(homebrew-launcher))으로 이어집니다. {: .notice--primary} \ No newline at end of file diff --git a/_pages/ko_KR/Installing-arm9loaderhax.txt b/_pages/ko_KR/Installing-arm9loaderhax.txt index c7c5019af..46db70a58 100644 --- a/_pages/ko_KR/Installing-arm9loaderhax.txt +++ b/_pages/ko_KR/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ arm9loaderhax를 설치하고 Luma3DS의 설정이 완료되면 백업을 복원 + **"New 3DS CPU" to "Clock+L2(x)"** + 이 옵션은 많은 게임의 프레임을 향상시키지만, 일부 게임은 불안정해질 수 있습니다. + 게임이 제대로 작동하지 않으면 이 옵션을 끄고 다시 시도해 보세요. + + This breaks the Homebrew Launcher on 11.3! 4. (Start) 버튼을 눌러 저장하고 기기를 재시작하세요. + 검은 화면이 보인다면 그냥 다음 섹션으로 넘어가세요. + "Failed to mount CTRNAND" 오류가 뜰 경우 그냥 다음 섹션으로 넘어가세요. @@ -151,31 +152,33 @@ EmuNAND 기반의 커스텀 펌웨어의 데이터를 새 SysNAND 커스텀 펌 1. 안전을 위한 주의사항(현재는 FBI) 앱을 실행하세요. 2. "SD"를 선택하세요. 3. "cias"를 선택하세요. -4. `FBI.cia`로 가서 (A) 버튼을 눌러 설치하세요. -5. `hblauncher_loader.cia`로 가서 (A) 버튼을 눌러 설치하세요. - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. `lumaupdater.cia`로 가서 (A) 버튼을 눌러 설치하세요. -7. (B) 버튼을 눌러 SD 디렉터리로 돌아가세요. -8. `arm9loaderhax.bin`로 가서 (A) 버튼을 누르고 "Copy" 옵션을 선택하세요. -9. (B) 버튼을 눌러 FBI 메인 메뉴로 돌아가세요. -10. "CTR NAND"를 선택하세요. -11. "\"를 선택하세요. -12. "Paste" 옵션을 선택 후 (A) 버튼을 눌러 진행하세요. -13. 홈 버튼을 눌러 빠져나오세요. -14. Reboot your device while holding (Start) to enter Hourglass9 -15. "SysNAND Backup/Restore"로 가서 "Health&Safety Inject"를 선택하세요. -16. `hs.app` (FBI를 담고 있지 않은 원본 앱) 파일을 선택하고 (A) 버튼을 눌러 주입하세요. -17. 메인 메뉴에서 (Select) 버튼을 누른 후 SD 카드를 빼세요. -18. SD 카드가 제거된 상태에서 (Start) 버튼을 눌러 기기를 재시작하세요. +4. "\"를 선택하세요. +5. Select the "Install all CIAs" option, then press (A) to confirm +6. (B) 버튼을 눌러 SD 디렉터리로 돌아가세요. +7. `arm9loaderhax.bin`로 가서 (A) 버튼을 누르고 "Copy" 옵션을 선택하세요. +8. (B) 버튼을 눌러 FBI 메인 메뉴로 돌아가세요. +9. "CTR NAND"를 선택하세요. +10. "\"를 선택하세요. +11. "Paste" 옵션을 선택 후 (A) 버튼을 눌러 진행하세요. +12. 홈 버튼을 눌러 빠져나오세요. +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. "SysNAND Backup/Restore"로 가서 "Health&Safety Inject"를 선택하세요. +19. `hs.app` (FBI를 담고 있지 않은 원본 앱) 파일을 선택하고 (A) 버튼을 눌러 주입하세요. +20. 메인 메뉴에서 (Select) 버튼을 누른 후 SD 카드를 빼세요. +21. SD 카드가 제거된 상태에서 (Start) 버튼을 눌러 기기를 재시작하세요. + SD 카드가 제거된 상태에서 부팅하여 CTRNAND 기반의 Luma3DS 설치를 설정합니다. -19. (A) 버튼과 십자 버튼을 이용해 다음 옵션들을 설정하세요: +22. (A) 버튼과 십자 버튼을 이용해 다음 옵션들을 설정하세요: + **"Show NAND or user string in System Settings"** -20. **뉴 3DS** 사용자는 다음 옵션들도 설정하실 수 있습니다: +23. **뉴 3DS** 사용자는 다음 옵션들도 설정하실 수 있습니다: + **"New 3DS CPU" to "Clock+L2(x)"** + 이 옵션은 많은 게임의 프레임을 향상시키지만, 일부 게임은 불안정해질 수 있습니다. + 게임이 제대로 작동하지 않으면 이 옵션을 끄고 다시 시도해 보세요. -21. SD 카드를 다시 3DS에 삽입하고 (Start) 버튼을 눌러 저장한 뒤 기기를 재시작하세요. + + This breaks the Homebrew Launcher on 11.3! +24. SD 카드를 다시 3DS에 삽입하고 (Start) 버튼을 눌러 저장한 뒤 기기를 재시작하세요. ___ diff --git a/_pages/ko_KR/Move-EmuNAND.txt b/_pages/ko_KR/Move-EmuNAND.txt index cf92f408e..568e4cdb8 100644 --- a/_pages/ko_KR/Move-EmuNAND.txt +++ b/_pages/ko_KR/Move-EmuNAND.txt @@ -48,4 +48,6 @@ permalink: /ko_KR/move-emunand.html 23. (Start) 버튼을 눌러 기기를 재시작하세요. 24. 검은 화면이 보인다면 [이 문제 해결 가이드](troubleshooting#ts_sys_down)를 참고하세요. +___ + [arm9loaderhax 설치](installing-arm9loaderhax)로 돌아갑니다. diff --git a/_pages/ko_KR/Region-Changing.txt b/_pages/ko_KR/Region-Changing.txt index 5b5f4af8b..2a28dee61 100644 --- a/_pages/ko_KR/Region-Changing.txt +++ b/_pages/ko_KR/Region-Changing.txt @@ -122,6 +122,8 @@ permalink: /ko_KR/region-changing.html 1. (Start) 버튼을 누른 뒤 (X) 버튼을 누른 채 기기를 재시작하여 Decrypt9을 실행하세요. 2. "SysNAND Options"로 가서 "System Save Inject", "Inject configsave.bin"를 차례로 선택하세요. +___ + 구 3DS / 2DS로 Extended Memory Mode를 사용하는 게임(몬스터 헌터, 슈퍼 스매시브라더스, 포켓몬 썬/문 등)을 즐기기 위해서는 (TinyFormat 혹은 본체 설정에서) 시스템을 포맷 해야 할 수 있습니다. {: .notice--info} diff --git a/_pages/ms_MY/9.2.0-ctrtransfer.txt b/_pages/ms_MY/9.2.0-ctrtransfer.txt index 4dee79d4b..0f9ae27f4 100644 --- a/_pages/ms_MY/9.2.0-ctrtransfer.txt +++ b/_pages/ms_MY/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Jika anda tidak mempunyai tiket yang bermula dengan 00- sebelum ini, anda boleh 8. Tekan (B) untuk menolak dari memasang tiket daripada CDN. 9. Keluar dengan menekan butang home +___ + Format peranti diikuti dengan ctrtransfer *tanpa pemulihan config save* akan menyebabkan permasalahan kecerahan skrin / kelip. Sila lihat [ini](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/ms_MY/Decrypt9-(Browser).txt b/_pages/ms_MY/Decrypt9-(Browser).txt index cc767e2f0..18819a675 100644 --- a/_pages/ms_MY/Decrypt9-(Browser).txt +++ b/_pages/ms_MY/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Jika anda mempunyai 3DS yang sudah diubahsuai sebelum ini dan mempunyai EmuNAND + Jika terdapat error, [Ikut panduan penyelesaian ini](troubleshooting#ts_browser) 5. Jika eksploit berjaya, anda akan memasuki ke dalam Decrypt9 +___ + Sambung ke [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt b/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt index 0c51c1386..b38812ca4 100644 --- a/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ms_MY/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /ms_MY/decrypt9-(homebrew-launcher).html + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi 10. Jika eksploit berjaya, anda akan memasuki ke dalam Decrypt9 +___ + Sambung ke [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ms_MY/Decrypt9-(MSET).txt b/_pages/ms_MY/Decrypt9-(MSET).txt index 9a938d10b..af42eece2 100644 --- a/_pages/ms_MY/Decrypt9-(MSET).txt +++ b/_pages/ms_MY/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Jika anda mempunyai 3DS yang sudah diubahsuai sebelum ini dan mempunyai EmuNAND 8. Reboot sistem, kemudian pergi ke System Settings, kemudian "Other Settings", kemudian "Profile", kemudian "Nintendo DS Profile" 9. Jika eksploit berjaya, anda akan memasuki ke dalam Decrypt9 +___ + Sambung ke [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ms_MY/F3-(Linux).txt b/_pages/ms_MY/F3-(Linux).txt index 5dba74e1c..659532b3c 100644 --- a/_pages/ms_MY/F3-(Linux).txt +++ b/_pages/ms_MY/F3-(Linux).txt @@ -51,6 +51,7 @@ Laman ini hanya untuk pengguna Linux sahaja. Jika anda tidak berada di Linux, li Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Jika keputusan test menunjukkan`Data LOST: 0.00 Byte (0 sectors)` bermaksud kad SD anda baik dan anda boleh buang semua file `.h2w` pada kad SD {: .notice--success} diff --git a/_pages/ms_MY/F3X-(Mac).txt b/_pages/ms_MY/F3X-(Mac).txt index 2e9564c9c..6c09ff751 100644 --- a/_pages/ms_MY/F3X-(Mac).txt +++ b/_pages/ms_MY/F3X-(Mac).txt @@ -26,6 +26,8 @@ Laman ini adalah untuk pengguna Mac sahaja. Jika anda tidak berada di Mac, lihat 5. Tekan "Start Test" 6. Tunggu sehingga proses selesai. +___ + Jika ujian menunjukkan keputusan `Success! Your card is ok!` kad SD anda baik dan anda boleh buang semua fail `.h2w` pada kad SD {: .notice--success} diff --git a/_pages/ms_MY/H2testw-(Windows).txt b/_pages/ms_MY/H2testw-(Windows).txt index e20b7d320..2210395f3 100644 --- a/_pages/ms_MY/H2testw-(Windows).txt +++ b/_pages/ms_MY/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Laman ini hanya untuk pengguna Windows sahaja. Jika anda tidak berada di windows 8. Klik "Write + Verify" 9. Tunggu sehingga proses selesai +___ + Jika keputusan test menunjukkan`Test finished without errors` bermaksud kad SD anda baik dan anda boleh buang semua fail `.h2w` pada kad SD {: .notice--success} diff --git a/_pages/ms_MY/Homebrew-Launcher-(Soundhax).txt b/_pages/ms_MY/Homebrew-Launcher-(Soundhax).txt index 80476ed60..a1ec24077 100644 --- a/_pages/ms_MY/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ms_MY/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax boleh digunakan untuk versi 9.0.0 hingga 11.2.0 untuk kawasan EUR, JPN, + Jika ia beku, anda boleh memaksa power off peranti anda dengan menahan butang power, kemudian cuba lagi 8. Peranti anda sepatutnya akan membuka Homebrew Launcher +___ + Teruskan ke [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ms_MY/Installing-arm9loaderhax.txt b/_pages/ms_MY/Installing-arm9loaderhax.txt index 6b3d6ea9a..fb2632040 100644 --- a/_pages/ms_MY/Installing-arm9loaderhax.txt +++ b/_pages/ms_MY/Installing-arm9loaderhax.txt @@ -106,10 +106,11 @@ Semasa proses ini, kami juga akan memasang program-program berikut: + **"Autoboot SysNAND"** + **"Use SysNAND FIRM if booting with R"** + **"Show NAND or user string in System Settings"** -3. Jika anda menggunakan **New 3DS**, anda juga *perlu* menghidupkn perkara-perkara berikut: +3. Jika anda menggunakan **New 3DS**, anda juga *perlu* menghidupkan perkara-perkara berikut: + **"New 3DS CPU" to "Clock+L2(x)"** + Ini akan meningkatkan framerate pelbagai games, tetapi mungkin menyebabkan ketidakstabilan pada yang lain + Jika terdapat beberapa games tidak berfungsi dengan elok, jangan gunakan pilihan ini dan cuba lagi + + Ini akan merosakkan Homebrew Launcher pada 11.3! 4. Tekan (Start) untuk save dan reboot + Jika anda mendapat skrin hitam, sila teruskan ke bahagian seterusnya + Jika anda mendapat "Failed to mount CTRNAND" error, sila teruskan ke bahagian seterusnya @@ -151,31 +152,33 @@ Jika, sebelum anda mengikuti panduan ini, anda sudah mempunyai EmuNAND dan mahu 1. Buka Health and Safety (ianya sekarang FBI) 6. Pilih "SD" 3. Pilih "cias" -4. Pergi ke `FBI.cia` dan tekan (A) untuk memasang -5. Pergi ke `hblauncher_loader.cia` dan tekan (A) untuk memasang - + Sila ambil perhatian homebrew launcher tidak berfungsi pada 11.3.0 - + Perkara ini diharapkan akan dibaiki dalam masa terdekat -6. Pergi ke `lumaupdater.cia` dan tekan (A) untuk memasang -7. Kembali ke direktori SD dengan menekan (B) -8. Pergi ke `arm9loaderhax.bin`, kemudian tekan (A) padanya dan pilih pilihan "Copy" -9. Kembali ke menu utama FBI dengan (B) -10. Pilih "CTR NAND" -11. Pilih "\" -12. Pilih pilihan "Paste", kemudian tekan (A) untuk pengesahan -13. Keluar dengan menekan butang home -14. Reboot peranti anda sambil menahan butang (Start) untuk memasuki Hourglass9 -15. Pergi ke "SysNAND Backup/Restore", kemudian pilih "Health&Safety Inject" -16. Pilih `hs.app` (asal yang tidak mempunyai FBI), kemudian tekan (A) dan pengesahan untuk suntikan -17. Tekan (Select) di menu utama untuk keluarkan kad SD anda -18. Tekan (Start) untuk reboot dengan kad SD masih dikeluarkan +4. Pilih "\" +5. Pilih pilihan "Install all CIAs", kemudian tekan butang (A) untuk pengesahan +6. Kembali ke direktori SD dengan menekan (B) +7. Pergi ke `arm9loaderhax.bin`, kemudian tekan (A) padanya dan pilih pilihan "Copy" +8. Kembali ke menu utama FBI dengan (B) +9. Pilih "CTR NAND" +10. Pilih "\" +11. Pilih pilihan "Paste", kemudian tekan (A) untuk pengesahan +12. Keluar dengan menekan butang home +13. Lancarkan Homebrew Launcher dari menu utama +14. Pilih "DSP Dump" +15. Tekan (Start) apabila ditanya untuk keluar +16. Tekan (Start) untuk membuka menu keluar Homebrew Launcher +17. Tekan butang (A) sambil menahan butang (Start) untuk reboot ke dalam Hourglass9 +18. Pergi ke "SysNAND Backup/Restore", kemudian pilih "Health&Safety Inject" +19. Pilih `hs.app` (asal yang tidak mempunyai FBI), kemudian tekan (A) dan pengesahan untuk suntikan +20. Tekan (Select) di menu utama untuk keluarkan kad SD anda +21. Tekan (Start) untuk reboot dengan kad SD masih dikeluarkan + Boot peranti anda sekurang-kurangnya sekali tanpa kad SD bagi memboleh anda mengubah CTRNAND berdasarkan pemasangan luma3DS -19. Gunakan butang (A) dan D-Pad untuk menghidupkan perkara-perkara berikut: +22. Gunakan butang (A) dan D-Pad untuk menghidupkan perkara-perkara berikut: + **"Show NAND or user string in System Settings"** -20. Jika anda menggunakan **New 3DS**, anda juga *perlu* menghidupkn perkara-perkara berikut: +23. Jika anda menggunakan **New 3DS**, anda juga *perlu* menghidupkan perkara-perkara berikut: + **"New 3DS CPU" to "Clock+L2(x)"** + Ini akan meningkatkan framerate pelbagai games, tetapi mungkin menyebabkan ketidakstabilan pada yang lain + Jika terdapat beberapa games tidak berfungsi dengan elok, jangan gunakan pilihan ini dan cuba lagi -21. Masukkan semula kad SD anda, kemudian tekan (Start) untuk menyimpan dan reboot! + + Ini akan merosakkan Homebrew Launcher pada 11.3! +24. Masukkan semula kad SD anda, kemudian tekan (Start) untuk menyimpan dan reboot! ___ diff --git a/_pages/ms_MY/Move-EmuNAND.txt b/_pages/ms_MY/Move-EmuNAND.txt index 840a11fe3..a38f698e3 100644 --- a/_pages/ms_MY/Move-EmuNAND.txt +++ b/_pages/ms_MY/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Anda akan HILANG semua saves GBA VC dan DSiWare! 23. Tekan (Start) untuk reboot! 24. + Jika anda mendapat skrin hitam, [Ikut panduan penyelesaian ini](troubleshooting#ts_sys_down) +___ + Kembali semula ke [Pemasangan arm9loaderhax](installing-arm9loaderhax). diff --git a/_pages/ms_MY/Region-Changing.txt b/_pages/ms_MY/Region-Changing.txt index c52c94484..afa50ee91 100644 --- a/_pages/ms_MY/Region-Changing.txt +++ b/_pages/ms_MY/Region-Changing.txt @@ -122,6 +122,8 @@ Penukaran kawasan menggunakan ctrtransfer (dimana cara ini gunakan) menunjukkan 1. Tekan (Start) kemudian tahan butang (X) untuk reboot ke dalam arm9loaderhax Decrypt9 2. Pergi ke "SysNAND Options", kemudian "System Save Inject", kemudian pilih "Inject configsave.bin" +___ + Old 3DS / 2DS mungkin perlu di format (menggunakan TinyFormat atau dari System Settings) untuk bermain extended memory mode games (seperti Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/nl_NL/9.2.0-ctrtransfer.txt b/_pages/nl_NL/9.2.0-ctrtransfer.txt index b676bbf15..d89cbebf5 100644 --- a/_pages/nl_NL/9.2.0-ctrtransfer.txt +++ b/_pages/nl_NL/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Als je geen tickets had die begonnen met 00-, kan je de volgende sectie overslaa 8. Druk op (B) om het installeren van tickets via CDN af te wijzen 9. Sluit af met de home knop +___ + Het formatteren van een apparaat nadat je een ctrtransfer hebt gedaan *zonder dat je de config save herstelt* kan voor schermhelderheids- / schermflikkeringproblemen zorgen. Zie [hier](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/nl_NL/Decrypt9-(Browser).txt b/_pages/nl_NL/Decrypt9-(Browser).txt index 6cc32f41f..10b2d565f 100644 --- a/_pages/nl_NL/Decrypt9-(Browser).txt +++ b/_pages/nl_NL/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Als je je 3DS al eens eerder gehacked hebt met een EmuNAND-gebaseerde CFW setup, + Als je een fout krijgt, [Volg deze oplossingsstappen](troubleshooting#ts_browser) 5. Als de exploitatie succesvol was, zal u Decrypt9 hebben opgestart +___ + Ga verder naar [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt b/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt index 2d14d89a2..e334b2fa7 100644 --- a/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/nl_NL/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /nl_NL/decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. Als de exploitatie succesvol was, zal u Decrypt9 hebben opgestart +___ + Ga verder naar [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/nl_NL/Decrypt9-(MSET).txt b/_pages/nl_NL/Decrypt9-(MSET).txt index 9cee707ae..e318210e2 100644 --- a/_pages/nl_NL/Decrypt9-(MSET).txt +++ b/_pages/nl_NL/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ De nieuwste versie van [Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/release 8. Start het systeem opnieuw op, vervolgens gaat naar systeem instellingen, vervolgens "Overige instellingen", dan "Profiel", vervolgens "Nintendo DS profiel" 9. Als de exploitatie succesvol was, zal u Decrypt9 hebben opgestart +___ + Ga verder naar [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/nl_NL/F3-(Linux).txt b/_pages/nl_NL/F3-(Linux).txt index 3cd7b124a..29f10da5e 100644 --- a/_pages/nl_NL/F3-(Linux).txt +++ b/_pages/nl_NL/F3-(Linux).txt @@ -51,6 +51,7 @@ Deze pagina is alleen voor Linux gebruikers. Als je geen Linux gebruikt, zie dan Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Als het resultaat van de test `Data LOST: 0.00 Byte (0 sectors)` is, dan is je SD-kaart goed en kun je alle `.h2w` bestanden van je SD-kaart verwijderen {: .notice--success} diff --git a/_pages/nl_NL/F3X-(Mac).txt b/_pages/nl_NL/F3X-(Mac).txt index f4cca6858..c9fc0e832 100644 --- a/_pages/nl_NL/F3X-(Mac).txt +++ b/_pages/nl_NL/F3X-(Mac).txt @@ -26,6 +26,8 @@ Deze pagina is alleen voor Mac-gebruikers. Als je geen Mac gebruikt, zie dan de 5. Druk op "Start Test" 6. Wacht totdat het proces voltooid is. +___ + Als de test het resultaat: 'Succes! Your card is ok!' laat zien, is je SD-kaart goed, en kan je alle '.h2w' bestanden op de SD-kaart verwijderen {: .notice--success} diff --git a/_pages/nl_NL/H2testw-(Windows).txt b/_pages/nl_NL/H2testw-(Windows).txt index 376807c2c..672014286 100644 --- a/_pages/nl_NL/H2testw-(Windows).txt +++ b/_pages/nl_NL/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Deze pagina is alleen voor windows-gebruikers. Als je geen Windows gebruikt, bek 8. Klik op "Write + Verify" 9. Wacht totdat het proces voltooid is +___ + Als de testresultaten `Test finished without errors` weergeeft, dan is je SD kaart goed en kan je alle `.h2w` bestanden op de SD kaart verwijderen {: .notice--success} diff --git a/_pages/nl_NL/Homebrew-Launcher-(Soundhax).txt b/_pages/nl_NL/Homebrew-Launcher-(Soundhax).txt index 8d6506d13..e190800de 100644 --- a/_pages/nl_NL/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/nl_NL/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatibel met versies 9.0.0 tot en met 11.2.0 in regio's EUR, JPN, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Ga verder naar [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/nl_NL/Installing-arm9loaderhax.txt b/_pages/nl_NL/Installing-arm9loaderhax.txt index c57e0ff38..f6e7fab0f 100644 --- a/_pages/nl_NL/Installing-arm9loaderhax.txt +++ b/_pages/nl_NL/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Tijdens dit proces, stellen wij ook programma's in als volgt: + **"New 3DS CPU" to "Clock+L2(x)"** + Dit zorgt van een toename van de framerate voor veel spellen, maar kan onstabiliteit veroorzaken in andere + Als een spel niet fatsoenlijk werkt, zet deze optie dan uit en probeer het opnieuw + + This breaks the Homebrew Launcher on 11.3! 4. Druk op (Start) om op te slaan en opnieuw op te starten + Als je een zwart scherm krijgt, ga dan gewoon verder naar het volgende deel + Als je de foutmelding "Failed to mount CTRNAND" krijgt, ga dan gewoon door naar het volgende deel @@ -151,31 +152,33 @@ Indien je vóór het volgen van deze handleiding al een EmuNAND setup had en de 1. Open Health and Safety (wat nu FBI is) 2. Selecteer "SD" 3. Selecteer "cias" -4. Ga naar 'FBI.cia' en druk op (A) om te installeren -5. Ga naar 'hblauncher_loader.cia' en druk op (A) om te installeren - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Ga naar 'lumaupdater.cia' en druk op (A) om te installeren -7. Ga terug naar de SD map met (B) -8. Ga naar 'arm9loaderhax.bin', druk dan op (A) en selecteer de optie "Copy" -9. Ga terug naar het hoofdmenu van FBI met (B) -10. Selecteer "CTR NAND" -11. Selecteer "\" -12. Selecteer de optie "Paste" en druk op (A) om te bevestigen -13. Sluit af met de home knop -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Ga naar "SysNAND Backup/Restore" en kies "Health&Safety Inject" -16. Selecteer 'hs.app' (de oorspronkelijke file niet met FBI geïnjecteerd is), druk op (A) en confirm om te injecteren -17. Druk op (Select) in het hoofdmenu om je SD-Kaart uit te werpen -18. Drup op (Start) om opnieuw op te starten met de SD-Kaart verwijderd +4. Selecteer "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Ga terug naar de SD map met (B) +7. Ga naar 'arm9loaderhax.bin', druk dan op (A) en selecteer de optie "Copy" +8. Ga terug naar het hoofdmenu van FBI met (B) +9. Selecteer "CTR NAND" +10. Selecteer "\" +11. Selecteer de optie "Paste" en druk op (A) om te bevestigen +12. Sluit af met de home knop +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Ga naar "SysNAND Backup/Restore" en kies "Health&Safety Inject" +19. Selecteer 'hs.app' (de oorspronkelijke file niet met FBI geïnjecteerd is), druk op (A) en confirm om te injecteren +20. Druk op (Select) in het hoofdmenu om je SD-Kaart uit te werpen +21. Drup op (Start) om opnieuw op te starten met de SD-Kaart verwijderd + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Selecteer de volgende opties met het D-pad en de (A) knop: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + Dit zorgt van een toename van de framerate voor veel spellen, maar kan onstabiliteit veroorzaken in andere + Als een spel niet fatsoenlijk werkt, zet deze optie dan uit en probeer het opnieuw -21. Stop je SD kaart opnieuw in je apparaat en druk dan op (Start) om op te slaan en opnieuw op te starten! + + This breaks the Homebrew Launcher on 11.3! +24. Stop je SD kaart opnieuw in je apparaat en druk dan op (Start) om op te slaan en opnieuw op te starten! ___ diff --git a/_pages/nl_NL/Move-EmuNAND.txt b/_pages/nl_NL/Move-EmuNAND.txt index 104c0af4d..b6091775d 100644 --- a/_pages/nl_NL/Move-EmuNAND.txt +++ b/_pages/nl_NL/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Je zal je GBA VC en DSiWare saves KWIJT ZIJN! 24. Druk op (Start) om opnieuw op te starten! 25. Wanneer je een zwart scherm hebt, [volg dan deze foutoplossingshadleiding](troubleshooting#ts_sys_down) +___ + Keer terug naar [Installeer arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/nl_NL/Region-Changing.txt b/_pages/nl_NL/Region-Changing.txt index 39bd8b589..2a9c30d4a 100644 --- a/_pages/nl_NL/Region-Changing.txt +++ b/_pages/nl_NL/Region-Changing.txt @@ -122,6 +122,8 @@ Het veranderen van je regio met behulp van ctrtransfer (dit is de methode die hi 1. Druk op (Start) en hou dan (X) ingedrukt om arm9loaderhax Decrypt9 op te starten 2. Ga naar "SysNAND Options", daarna "System Save Inject" en selecteer daarna "Inject configsave.bin" +___ + Old 3DS'en / 2DS'en moeten misschien geformatteerd worden (door gebruik te maken van TinyFormat of de Systeem Instellingen) om extended memory mode games te kunnen spelen (zoals Monster Hunter, Super Smash Bros of Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/no_NO/9.2.0-ctrtransfer.txt b/_pages/no_NO/9.2.0-ctrtransfer.txt index 0a329d03e..ccdf61f8f 100644 --- a/_pages/no_NO/9.2.0-ctrtransfer.txt +++ b/_pages/no_NO/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Hvis du ikke hadde noen tickets som startet med 00- tidliger kan du hoppe over d 8. Trykk (B) å avslå ticketinstallasjon fra CDN. 9. Avslutt med hjem-knappen +___ + Å formatere en enhet etter en ctrtransfer * uten å gjenopprette konfigurasjonssaver * kan forårsake problemer med skjermlysstyrke/flimring. Se [dette](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/no_NO/Decrypt9-(Browser).txt b/_pages/no_NO/Decrypt9-(Browser).txt index b2b8f74d9..7ca624f98 100644 --- a/_pages/no_NO/Decrypt9-(Browser).txt +++ b/_pages/no_NO/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Hvis du allerede har hacket 3DSen din tidligere, og har et EmuNAND-basert CFW-op + Hvis du får en feilmelding, [Følg denne feilsøkingsveiledningen](troubleshooting#ts_browser) 5. Hvis exploiten var vellykket, vil du ha startet Decrypt9 +___ + Fortsett til [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt b/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt index 33e7215f1..f5eb61654 100644 --- a/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/no_NO/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /no_NO/decrypt9-(homebrew-launcher).html + Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen 10. Hvis exploiten var vellykket, vil du ha startet Decrypt9 +___ + Fortsett til [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/Decrypt9-(MSET).txt b/_pages/no_NO/Decrypt9-(MSET).txt index e86e0a5a6..23da3dfe1 100644 --- a/_pages/no_NO/Decrypt9-(MSET).txt +++ b/_pages/no_NO/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Hvis du allerede har hacket 3DSen din tidligere, og har et EmuNAND-basert CFW-op 8. Start systemet på nytt, og gå deretter til systeminstillinger, "Other Settings", "Profile" og så "Nintendo DS Profile" 9. Hvis exploiten var vellykket, vil du ha startet Decrypt9 +___ + Fortsett til [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/F3-(Linux).txt b/_pages/no_NO/F3-(Linux).txt index eb7215e07..ccca0289e 100644 --- a/_pages/no_NO/F3-(Linux).txt +++ b/_pages/no_NO/F3-(Linux).txt @@ -51,6 +51,7 @@ Denne siden er kun for Linux-brukere. Hvis du ikke bruker Linux, sjekk ut siden, Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Hvis testen viser resultatet `DATA LOST: 0.00 Byte (0 sectors)` er SD-kortet OK og du kan så slette alle `.h2w` filene på SD kortet {: .notice--success} diff --git a/_pages/no_NO/F3X-(Mac).txt b/_pages/no_NO/F3X-(Mac).txt index 77c6cb96d..4e8f90408 100644 --- a/_pages/no_NO/F3X-(Mac).txt +++ b/_pages/no_NO/F3X-(Mac).txt @@ -26,6 +26,8 @@ Denne siden er kun for Mac-brukere. Hvis du ikke bruker Mac, sjekk ut [H2testw ( 5. Trykk "Start Test" 6. Vent til prosessen er ferdig. +___ + Hvis testen viser `Success! Your card is ok!`, er SD-kortet god, og du kan slette alle `.h2w` filene {: .notice--success} diff --git a/_pages/no_NO/H2testw-(Windows).txt b/_pages/no_NO/H2testw-(Windows).txt index e49fc8087..9cbf93f63 100644 --- a/_pages/no_NO/H2testw-(Windows).txt +++ b/_pages/no_NO/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Denne siden er kun for Windows-brukere. Hvis du ikke bruker Windows, sjekk ut si 8. Klikk "Write + Verify" 9. Vent til prosessen har fullført +___ + Hvis testen viser `Test finished without errors`, er SD-kortet klart, og du kan slette alle `.h2w` filene på SD-kortet {: .notice--success} diff --git a/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt b/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt index 48a858777..bcb0edf5b 100644 --- a/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/no_NO/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax er kompatibel med versjonene fra 9.0.0 til og med 11.2.0 i EUR, JPN, KO + Hvis enheten fryser, kan du tvinge den til å skru seg av ved og holde av-knappen og så prøve igjen 8. Konsollen burde nå laste homebrewmenyen +___ + Fortsett til [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/no_NO/Installing-arm9loaderhax.txt b/_pages/no_NO/Installing-arm9loaderhax.txt index b40367053..b9b0a1737 100644 --- a/_pages/no_NO/Installing-arm9loaderhax.txt +++ b/_pages/no_NO/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Under denne prossesen, vil vi også sette opp program som følgende: + **"New 3DS CPU" til "Clock+L2(x)"** + Dette vil øke ytelsen i mange spill, men kan også skape ustabilitet i andre + Hvis noen spill ikke fungerer som de skal, deaktiver dette alternativet å prøve igjen + + This breaks the Homebrew Launcher on 11.3! 4. Trykk (Start) for å lagre og starte på nytt + Hvis du får svart skjerm, bare fortsett til neste seksjon + Hvis du får en feil som sier "Failed to mount CTRNAND", bare fortsett til den neste seksjonen @@ -151,31 +152,33 @@ Hvis du før du fulgte denne veiledningen, allerede hadde et EmuNAND oppsett og 1. Åpne "Health and Safety" (som nå er FBI) 2. Velg "SD" 3. Velg "cias" -4. Gå til `FBI.cia` og trykk (A) for å installere -5. Gå til `hblauncher_loader.cia` og trykk (A) for å installere - + Vær oppmerksom på at homebrew launcher ikke virker på versjon 11.3.0 - + Dette blir forhåpentligvis fikset snart -6. Gå til `lumaupdater.cia` og trykk (A) for å installere -7. Gå tilbake til SD-mappen med (B) -8. Gå til `arm9loaderhax.bin`, deretter trykk (A) og velg "Copy" -9. Gå tilbake til hovedmenyen for FBI med (B) -10. Velg "CTR NAND" -11. Velg "\" -12. Velg alternativet "Paste", for å lime inn, og trykk (A) for å bekrefte -13. Avslutt med hjem-knappen -14. Restart enheten mens du holder (Start) til å gå inn i Hourglass9 -15. Gå til "SysNAND Backup/Restore", og velg "Health&Safety Inject" -16. Velg `hs.app` (den originale som ikke inneholder FBI), og trykk (A) for å bekrefte injeksjon -17. Trykk (Select) på hovedmenyen for å løse ut SD-kortet -18. Trykk (Start) for omstart med SD-kortet fjernet +4. Velg "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Gå tilbake til SD-mappen med (B) +7. Gå til `arm9loaderhax.bin`, deretter trykk (A) og velg "Copy" +8. Gå tilbake til hovedmenyen for FBI med (B) +9. Velg "CTR NAND" +10. Velg "\" +11. Velg alternativet "Paste", for å lime inn, og trykk (A) for å bekrefte +12. Avslutt med hjem-knappen +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Gå til "SysNAND Backup/Restore", og velg "Health&Safety Inject" +19. Velg `hs.app` (den originale som ikke inneholder FBI), og trykk (A) for å bekrefte injeksjon +20. Trykk (Select) på hovedmenyen for å løse ut SD-kortet +21. Trykk (Start) for omstart med SD-kortet fjernet + Å starte konsollen minst en gang uten SD-kortet, lar deg konfigurere den CTRNAND-baserte Luma installasjonen -19. Bruk (A)-knappen og piltastene for å aktivere følgende: +22. Bruk (A)-knappen og piltastene for å aktivere følgende: + **"Show NAND or user string in System Settings"** -20. Hvis du bruker en **New 3DS**, bør du *også* aktivere følgende: +23. Hvis du bruker en **New 3DS**, bør du *også* aktivere følgende: + **"New 3DS CPU" til "Clock+L2(x)"** + Dette vil øke ytelsen i mange spill, men kan også skape ustabilitet i andre + Hvis noen spill ikke fungerer som de skal, deaktiver dette alternativet å prøve igjen -21. Sett inn SD-kortet, og trykk (Start) for å lagre og starte på nytt! + + This breaks the Homebrew Launcher on 11.3! +24. Sett inn SD-kortet, og trykk (Start) for å lagre og starte på nytt! ___ diff --git a/_pages/no_NO/Move-EmuNAND.txt b/_pages/no_NO/Move-EmuNAND.txt index fc1f7a134..92131db50 100644 --- a/_pages/no_NO/Move-EmuNAND.txt +++ b/_pages/no_NO/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Du vil MISTE GBA VC og DSiWare savene dine! 23. Trykk (Start) for omstart! 24. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down) +___ + Tilbake til [Installere arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/no_NO/Region-Changing.txt b/_pages/no_NO/Region-Changing.txt index 5a3dc9149..b244ec618 100644 --- a/_pages/no_NO/Region-Changing.txt +++ b/_pages/no_NO/Region-Changing.txt @@ -122,6 +122,8 @@ Regionsbytte ved hjelp av ctrtransfer (som denne metoden bruker) ser ut til å f 1. Trykk (Start) og hold (X) for omstart til arm9loaderhax Decrypt9 2. Gå til "SysNAND Options", deretter "System Save inject", velg deretter "Inject configsave.bin" +___ + Gamle 3DSs / 2DSs kann trenge en ny formatering (bruk TinyFormat eller systeminnstillinger) for å spille utvidet minnemodusspill (som Monster Hunter, Super Smash Bros eller Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/pl_PL/9.2.0-ctrtransfer.txt b/_pages/pl_PL/9.2.0-ctrtransfer.txt index 60237c169..41072c3d8 100644 --- a/_pages/pl_PL/9.2.0-ctrtransfer.txt +++ b/_pages/pl_PL/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Jeśli w folderze '/files9' na karcie SD nie miałeś ticketów rozpoczynającyc 8. Naciśnij (B) aby pominąć instalację ticketów z CDN. 9. Wyjdź z FBI naciskając przycisk "Home" +___ + Formatowanie 3DS'a po zrobieniu ctrtransefr'u *bez uprzedniego przywrócenia pliku konfiguracyjnego* może spowodować problemy z jasnością / migotaniem ekranu. Szczegóły [tutaj](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/pl_PL/Decrypt9-(Browser).txt b/_pages/pl_PL/Decrypt9-(Browser).txt index abc955ecc..90b25fe55 100644 --- a/_pages/pl_PL/Decrypt9-(Browser).txt +++ b/_pages/pl_PL/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Jeśli już masz przerobioną konsolę oraz posiadasz EmuNAND bazujący na CFW, + Jeśli pojawi się błąd, [Podążaj za tym poradnikiem](troubleshooting#ts_browser) 5. Jeśli operacja zakończyła się pomyślnie, aplikacja Decrypt9 zostanie załadowana +___ + Kontynuuj do [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt b/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt index e711eec64..8d321b4ac 100644 --- a/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pl_PL/Decrypt9-(Homebrew-Launcher).txt @@ -13,7 +13,7 @@ permalink: /pl_PL/decrypt9-(homebrew-launcher).html #### Instrukcje 1. Wyciągnij kartę SD ze swojej konsoli, pozostawiając uruchomiony Homebrew Launcher a następnie włóż ją do czytnika w swoim komputerze -2. Stwórz folder o nazwie "files9" w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje +2. Stwórz folder o nazwie `files9`w głównym katalogu twojej karty SD, jeśli jeszcze nie istnieje 3. Skopiuj plik `safehax.3dsx` do folderu `/3ds/` na twojej karcie SD 4. Skopiuj `fasthax.3dsx` do folderu `/3ds/` na twojej karcie SD 5. Skopiuj plik `Decrypt9WIP.bin` z archiwum Decrypt9WIP `.zip` do katalogu głównego karty SD i zmień nazwę pliku z `Decrypt9WIP.bin` na `safehaxpayload.bin` @@ -22,11 +22,13 @@ permalink: /pl_PL/decrypt9-(homebrew-launcher).html + Przewiń listę w dół jeśli nie widzisz tej aplikacji 8. Kiedy aplikacja zakończy pracę, naciśnij (Start), aby wyjść z powrotem do Homebrew Launchera + Może to wymagać kilku prób - + If it freezes, just force the console to power off by holding the power button, then try again + + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie 9. Uruchom aplikację safehax na liście homebrew + Przewiń listę w dół jeśli nie widzisz tej aplikacji - + If it freezes, just force the console to power off by holding the power button, then try again + + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie 10. Jeśli operacja zakończyła się pomyślnie, aplikacja Decrypt9 zostanie załadowana +___ + Kontynuuj do [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pl_PL/Decrypt9-(MSET).txt b/_pages/pl_PL/Decrypt9-(MSET).txt index 20dfbd28c..45fce2771 100644 --- a/_pages/pl_PL/Decrypt9-(MSET).txt +++ b/_pages/pl_PL/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Najnowsza wersja [Decrypt9WIP] (https://github.com/d0k3/Decrypt9WIP/releases/lat 8. Uruchom konsolę ponownie, przejdź do System Settings, wybierz "Other Settings", potem "Profile" a potem "Nintendo DS Profile" 9. Jeśli operacja zakończyła się pomyślnie, uruchomi się aplikacja Decrypt9 +___ + Kontynuuj do [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pl_PL/F3-(Linux).txt b/_pages/pl_PL/F3-(Linux).txt index de5f88b48..a26eaeccd 100644 --- a/_pages/pl_PL/F3-(Linux).txt +++ b/_pages/pl_PL/F3-(Linux).txt @@ -51,6 +51,7 @@ Ta strona dotyczy tylko użytkowników systemu Linux. Jeśli nie posiadasz Linux Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Jeśli test pokazuje wynik `Data LOST: 0.00 Byte (0 sectors)`, karta SD nie posiada błędów i możesz usunąć wszystkie pliki '.h2w' na karcie SD {: .notice--success} diff --git a/_pages/pl_PL/F3X-(Mac).txt b/_pages/pl_PL/F3X-(Mac).txt index b69163793..a59ea97e1 100644 --- a/_pages/pl_PL/F3X-(Mac).txt +++ b/_pages/pl_PL/F3X-(Mac).txt @@ -26,6 +26,8 @@ Ta strona dotyczy tylko użytkowników systemu Mac. Jeśli nie posiadasz kompute 5. Naciśnij przycisk "Start Test" 6. Poczekaj na zakończenie procesu. +___ + Jeśli test pokazuje wynik ' Succces! Your card is ok!` twoja karta SD nie zawiera błędów i możesz usunąć wszystkie pliki z rozszerzeniem `.h2w` {: .notice--success} diff --git a/_pages/pl_PL/H2testw-(Windows).txt b/_pages/pl_PL/H2testw-(Windows).txt index dd6bd787f..3ec84dc4b 100644 --- a/_pages/pl_PL/H2testw-(Windows).txt +++ b/_pages/pl_PL/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Najnowsza wersja programu [h2testw] (http://www.heise.de/ct/Redaktion/bo/downloa 8. Kliknij "Write + Verify" 9. Poczekaj na zakończenie procesu +___ + Jeśli test pokazuje wynik 'Test finished without errors', karta SD nie posiada błędów i możesz usunąć wszystkie pliki '.h2w' na karcie SD {: .notice--success} diff --git a/_pages/pl_PL/Home.txt b/_pages/pl_PL/Home.txt index c35c299ec..f72d73693 100644 --- a/_pages/pl_PL/Home.txt +++ b/_pages/pl_PL/Home.txt @@ -36,13 +36,13 @@ Jeśli posiadasz konsolę developera ("PANDA" lub "SNAKE"), sprawdź [devGuide]( [**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) zwykle odnosi się do programów, które nie są autoryzowane przez Nintendo. Programy te pozwalają na uruchamianie niekomercyjnych gier homebrew, narzędzi do edycji i tworzenia kopii zapasowych zapisów gier, a także emulatorów różnorakich, starszych systemów. -In most cases, running homebrew on your console is 100% free using [just the Nintendo 3DS Sound app](homebrew-launcher-(soundhax)) (if you are on >=11.3.0, you will be unable to proceed past homebrew). There are also various other exploits in commercial games and the browser to get homebrew running. +W większości przypadków, używanie homebrew na twojej konsoli jest w 100% darmowe korzystając [tylko aplikacji Nintendo 3DS Sound](homebrew-launcher-(soundhax)) (jeśli posiadasz wersję systemu >=11.3.0, nie będziesz miał dostępu do niczego poza homebrew). Są też różne inne exploity w grach i przeglądarce, umożliwiające uruchomienie homebrew. ## Czym jest Custom Firmware? **Custom Firmware** ("CFW") pozwala ci na używanie bardziej zaawansowanych hacków, czego zwykły dostęp do homebrew nie może łatwo zrobić. Przykładowo, patch podpisów pozwala ci na instalację niepodpisanych tytułów które pojawiają się bezpośrednio w HOME Menu. -CFW can be easily set up on any console that is on 11.2.0 or lower. +CFW może być z łatwością zainstalowane na każdej konsoli z systemem w wersji 11.2.0 lub niższej. ## Co jest celem tej instrukcji? diff --git a/_pages/pl_PL/Homebrew-Launcher-(Soundhax).txt b/_pages/pl_PL/Homebrew-Launcher-(Soundhax).txt index 981823838..51b553dcc 100644 --- a/_pages/pl_PL/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/pl_PL/Homebrew-Launcher-(Soundhax).txt @@ -25,10 +25,12 @@ SoundHax jest kompatybilny z wersjami od 9.0.0 do 11.2.0 włącznie, z regionów 5. Uruchom aplikację Nintendo 3DS Sound 6. Przejdź przez wszystkie wskazówki od ptaszka, a następnie zamknij aplikację i otwórz ją ponownie + Natychmiastowe uruchomienie SoundHax'a spowoduje, że wskazówki te będą pojawiać się za każdym razem gdy uruchomisz Nintendo 3DS Sound -7. Go to `/SDCARD`, then play "<3 nedwill 2016" - + This may take many tries +7. Nawiguj do `/SDCARD`, następnie odtwórz "<3 nedwill 2016" + + Może to wymagać wielu prób + Jeśli konsola się zawiesi, przytrzymaj przycisk power aby ją wyłączyć i spróbuj ponownie 8. Konsola powinna załadować Homebrew Launcher +___ + Kontynuuj do [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pl_PL/Installing-arm9loaderhax.txt b/_pages/pl_PL/Installing-arm9loaderhax.txt index a52d2a823..468baa90c 100644 --- a/_pages/pl_PL/Installing-arm9loaderhax.txt +++ b/_pages/pl_PL/Installing-arm9loaderhax.txt @@ -85,16 +85,16 @@ Podczas tego procesu zainstalujemy również takie programy jak: ##### Sekcja II - Instalacja arm9loaderhax 1. Włóż kartę SD z powrotem do konsoli -2. You should be on 2.1.0 -3. Go to `http://2xrsa.3ds.guide` on your 3DS +2. Powinieneś być na firmware 2.1.0 +3. Przejdź do `http://2xrsa.3ds.guide` na swojej konsoli + Jeśli pojawi się błąd "This service is not available in your region", użyj ustawień systemowych aby zmienić region konsoli zgodnie z regionem NAND'u zainstalowanego wraz z 2.1.0 ctrtransfer + Jeśli pojawi się inny błąd, [przejdź do rozwiązywania problemów](troubleshooting#ts_browser) + Jeśli pojawi się zglitchowany ekran, [przejdź do rozwiązywania problemów](troubleshooting#ts_safe_a9lh_screen) + Jeśli używasz 2DS lub New3DS i obniżyłeś wersję firmware do 2.1.0 z wyłączoną komunikacją bezprzewodową (Wi-Fi), możesz ją ponownie włączyć poprzez wyjęcie baterii i odłączenie ładowarki od konsoli na kilka sekund, a następnie ponowne jej uruchomienie -4. Press (Select) to Full Install -5. The installer will now install arm9loaderhax on your device (this is very fast) -6. Shut down your console by pressing any button -7. Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS +4. Naciśnij (Select) aby przeprowadzić pełną instalację +5. Instalator zainstaluje teraz arm9loaderhax na twoim urządzeniu (jest to bardzo szybkie) +6. Wyłącz swoją konsolę, naciskając dowolny przycisk +7. Skopiuj twój unikalny `OTP.bin` z folderu `/a9lh/` na karcie SD do bezpiecznej lokalizacji na twoim komputerze oraz wykonaj kilka jego kopii zapasowych do innych lokalizacji (np. dysku w chmurze), następnie ponownie włóż kartę SD do swojego 3DS ##### Sekcja III - Konfiguracja Luma3DS @@ -110,6 +110,7 @@ Podczas tego procesu zainstalujemy również takie programy jak: + **"New 3DS CPU" to "Clock+L2(x)"** + Spowoduje to zwiększenie ilości klatek na sekundę w wielu grach, ale może także spowodować niestabilność w innych + Jeśli jakieś gry nie działają poprawnie, należy wyłączyć tę opcję i spróbować ponownie + + To uszkadza Homebrew Launcher na 11.3! 4. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie + Jeśli pojawi się czarny ekran, kontynuuj do następnej sekcji + Jeśli pojawi się błąd "Failed to mount CTRNAND", kontynuuj do następnej sekcji @@ -121,8 +122,8 @@ Jeśli przed rozpoczęciem tej instrukcji miałeś już zainstalowaną konfigura 1. Uruchom swoją konsolę przytrzymując jednocześnie przycisk (Start) aby uruchomić aplikację Hourglass9 2. Przejdź do "SysNAND Backup/Restore" -3. Go to "SysNAND Restore (keep a9lh)" -4. Input the key combo given, then select the `NANDmin.bin` image when prompted by pressing (A) +3. Przejdź do "SysNAND Restore (keep a9lh)" +4. Wprowadź wyświetloną sekwencję przycisków, a następnie wybierz plik `NANDmin.bin` kiedy zostaniesz o niego zapytany, naciskając (A) 5. Naciśnij przycisk (Start) by uruchomić konsolę ponownie + Jeśli pojawi się czarny ekran, [przejdź do 9.2.0 ctrtransfer](9.2.0-ctrtransfer) 6. Jeśli twoja kopia NAND pochodzi z wersji pomiędzy 3.0.0 a 4.5.0, twoja konsola nie uruchomi się dopóki ręcznie nie pobierzesz wymaganego firmware: @@ -151,31 +152,33 @@ Jeśli przed rozpoczęciem tej instrukcji miałeś już zainstalowaną konfigura 1. Otwórz Health and Safety (które teraz jest FBI) 2. Wybierz "SD" 3. Wybierz "cias" -4. Przejdź do `FBI.cia` i naciśnij (A) żeby go zainstalować -5. Przejdź do `hblauncher_loader.cia` i naciśnij (A) aby go zainstalować - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Przejdź do `lumaupdater.cia` i naciśnij (A) aby go zainstalować -7. Wróć do katalogu SD, naciskając (B) -8. Zaznacz plik 'arm9loaderhax.bin', a następnie naciśnij (A) i wybierz opcję "Copy" -9. Wróć do głównego menu FBI naciskając (B) -10. Wybierz "CTR NAND" -11. Wybierz "\" -12. Wybierz opcję "Paste", a następnie naciśnij (A) aby potwierdzić -13. Wyjdź z FBI naciskając przycisk "Home" -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Przejdź do "SysNAND Backup/Restore", a następnie wybierz "Health&Safety Inject" -16. Wybierz `hs.app` (tę oryginalną, niezawierającą FBI), następnie naciśnij (A) i potwierdź wdrożenie aplikacji -17. Naciśnij (Select) w menu głównym Hourglass9 aby bezpiecznie wyciągnąć kartę SD -18. Naciśnij (Start) aby uruchomić konsolę ponownie z wyciągniętą kartą SD +4. Wybierz "\" +5. Wybierz opcję "Install all CIAs", a następnie naciśnij (A) aby potwierdzić +6. Wróć do katalogu SD, naciskając (B) +7. Zaznacz plik 'arm9loaderhax.bin', a następnie naciśnij (A) i wybierz opcję "Copy" +8. Wróć do głównego menu FBI naciskając (B) +9. Wybierz "CTR NAND" +10. Wybierz "\" +11. Wybierz opcję "Paste", a następnie naciśnij (A) aby potwierdzić +12. Wyjdź z FBI naciskając przycisk "Home" +13. Uruchom Homebrew Launcher z menu głównego +14. Wybierz "DSP Dump" +15. Naciśnij (Start) gdy zostaniesz o to poproszony, aby wyjść z DSP Dump +16. Naciśnij (Start) aby otworzyć menu wyjścia z Homebrew Launcher +17. Naciśnij (A) trzymając równocześnie (Start) aby uruchomić ponownie do Hourglass9 +18. Przejdź do "SysNAND Backup/Restore", a następnie wybierz "Health&Safety Inject" +19. Wybierz `hs.app` (tę oryginalną, niezawierającą FBI), następnie naciśnij (A) i potwierdź wdrożenie aplikacji +20. Naciśnij (Select) w menu głównym Hourglass9 aby bezpiecznie wyciągnąć kartę SD +21. Naciśnij (Start) aby uruchomić konsolę ponownie z wyciągniętą kartą SD + Uruchomienie urządzenia przynajmniej raz z wyciągniętą kartą SD pozwoli na konfigurację instalacji Luma3DS, znajdującej się w CTRNAND -19. Użyj przycisku (A) oraz D-Pada, aby włączyć następujące opcje: +22. Użyj przycisku (A) oraz D-Pada, aby włączyć następujące opcje: + **"Show NAND or user string in System Settings"** -20. Jeśli posiadasz **New 3DS**, możesz *także* włączyć następujące funkcje: +23. Jeśli posiadasz **New 3DS**, możesz *także* włączyć następujące funkcje: + **"New 3DS CPU" to "Clock+L2(x)"** + Spowoduje to zwiększenie ilości klatek na sekundę w wielu grach, ale może także spowodować niestabilność w innych + Jeśli jakieś gry nie działają poprawnie, należy wyłączyć tę opcję i spróbować ponownie -21. Włóż z powrotem kartę SD do swojej konsoli i naciśnij Start aby zapisać konfigurację i uruchomić ją ponownie! + + To uszkadza Homebrew Launcher na 11.3! +24. Włóż z powrotem kartę SD do swojej konsoli i naciśnij Start aby zapisać konfigurację i uruchomić ją ponownie! ___ diff --git a/_pages/pl_PL/Move-EmuNAND.txt b/_pages/pl_PL/Move-EmuNAND.txt index 2ad8de22b..6cf285bf2 100644 --- a/_pages/pl_PL/Move-EmuNAND.txt +++ b/_pages/pl_PL/Move-EmuNAND.txt @@ -48,4 +48,6 @@ W wyniki poniższych kroków, STRACISZ swoje zapisy stanu gier GBA VC oraz DSiWa 23. Naciśnij przycisk (Start) aby uruchomić konsolę ponownie! 24. Jeżeli uruchamianie konsoli zatrzyma się na czarnym ekranie, [wykonaj instrukcję rozwiązywania problemów](troubleshooting#ts_sys_down) +___ + Powróć do [Instalowanie arm9loaderhax](installing-arm9loaderhax). diff --git a/_pages/pl_PL/Region-Changing.txt b/_pages/pl_PL/Region-Changing.txt index b3f5349ab..7301eb00d 100644 --- a/_pages/pl_PL/Region-Changing.txt +++ b/_pages/pl_PL/Region-Changing.txt @@ -122,6 +122,8 @@ Ponadto, zmiana regionu konsoli przy użyciu ctrtransfer (z którego korzysta ta 1. Naciśnij (Start), a następnie przytrzymaj (X), aby uruchomić konsolę ponownie i załadować Decrypt9 poprzez arm9loaderhax 2. Wybierz "SysNAND Options", "System Save Inject", a następnie "Inject configsave.bin" +___ + Konsole Old 3DS / 2DS mogą wymagać formatu (przy użyciu TinyFormat lub System Settings) aby uruchamiać gry działające w trybie rozszerzonej pamięci (takich jak Monster Hunter, Super Smash Bros czy Pokémon Sun / Moon). {: .notice--info} diff --git a/_pages/pt_BR/9.2.0-ctrtransfer.txt b/_pages/pt_BR/9.2.0-ctrtransfer.txt index 75a960cb1..14ffd9991 100644 --- a/_pages/pt_BR/9.2.0-ctrtransfer.txt +++ b/_pages/pt_BR/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Se você não tinha tickets começando com 00- anteriormente, você pode pular e 8. Aperte (B) para recusar a instalação de tickets do CDN. 9. Saia com o botão HOME +___ + Formatar um dispositivo após um ctrtransfer *sem restaurar as configurações salvas* pode causar problemas de brilho / cintilação na tela. Veja [isto](https://github.com/Plailect/Guide/Issues/794). {: .notice--info} diff --git a/_pages/pt_BR/Decrypt9-(Browser).txt b/_pages/pt_BR/Decrypt9-(Browser).txt index 4780652d0..0d8f25260 100644 --- a/_pages/pt_BR/Decrypt9-(Browser).txt +++ b/_pages/pt_BR/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Se você já fez um hack no seu 3DS antes e tem um CFW baseado em EmuNAND, esse + Se você receber um erro, [siga este guia de troubleshooting](troubleshooting#ts_browser) 5. Se o exploit funcionou, você terá aberto o Decrypt9 +___ + Continuar para a [ctrtransfer para a 2.1.0](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt b/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt index d8ec9c1dc..37c1e8949 100644 --- a/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pt_BR/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /pt_BR/decrypt9-(homebrew-launcher).html + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente 10. Se o exploit funcionar, o Decrypt9 estará aberto +___ + Continuar para a [ctrtransfer para a 2.1.0](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/Decrypt9-(MSET).txt b/_pages/pt_BR/Decrypt9-(MSET).txt index e07a9953e..abc6182f2 100644 --- a/_pages/pt_BR/Decrypt9-(MSET).txt +++ b/_pages/pt_BR/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Se você já fez um hack no seu 3DS antes e tem um CFW baseado em EmuNAND, esse 8. Reinicie o sistema, vá para a Configuração do Console, "Outras Configurações", "Perfil", "Perfil Nintendo DS" 9. Se o exploit funcionar, você terá inicializado o Decrypt9 +___ + Continuar para [ctrtansfer para 2.1.0](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/F3-(Linux).txt b/_pages/pt_BR/F3-(Linux).txt index c168865b3..d986dcc0b 100644 --- a/_pages/pt_BR/F3-(Linux).txt +++ b/_pages/pt_BR/F3-(Linux).txt @@ -51,6 +51,7 @@ Esta página é destinada apenas a usuários do Linux. Se você não estiver no Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Se o teste mostrar o resultado `Data LOST: 0.00 Byte (0 sectors)` o cartão SD não possui erros e você pode apagar todos os arquivos `.h2w` do cartão SD {: .notice--success} diff --git a/_pages/pt_BR/F3X-(Mac).txt b/_pages/pt_BR/F3X-(Mac).txt index 745693e4f..558f644d4 100644 --- a/_pages/pt_BR/F3X-(Mac).txt +++ b/_pages/pt_BR/F3X-(Mac).txt @@ -26,6 +26,8 @@ Esta página é destinada apenas a usuários do Mac. Se você não estiver no Ma 5. Clique em "Start Test" 6. Aguarde até que o processo seja concluído. +___ + Se o teste mostrar o resultado `Success! Your card is ok!` o cartão SD não possui erros e você pode apagar todos os arquivos `.h2w` do cartão SD {: .notice--success} diff --git a/_pages/pt_BR/H2testw-(Windows).txt b/_pages/pt_BR/H2testw-(Windows).txt index 7dff1a155..b22a79deb 100644 --- a/_pages/pt_BR/H2testw-(Windows).txt +++ b/_pages/pt_BR/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Esta página é destinada apenas a usuários do Windows. Se você não estiver n 8. Clique em "Write + Verify" 9. Aguarde até que o processo seja concluído +___ + Se o teste mostrar o resultado `Test finished without errors`, o cartão SD não possui erros e você pode apagar todos os arquivos `.h2w` do cartão SD {: .notice--success} diff --git a/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt b/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt index 15e670695..194ef6e6f 100644 --- a/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/pt_BR/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax é compatível com as versões de 9.0.0 a 11.2.0 nas regiões EUA, EUR, + Se o console congelar, force-o a desligar segurando o botão Power, e então tente novamente 8. Seu console deve carregar o Homebrew Launcher +___ + Continuar para [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_BR/Installing-arm9loaderhax.txt b/_pages/pt_BR/Installing-arm9loaderhax.txt index 9f2574cac..b91f42f1b 100644 --- a/_pages/pt_BR/Installing-arm9loaderhax.txt +++ b/_pages/pt_BR/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Durante este processo, também configuramos alguns programas como os seguintes: + **"New 3DS CPU" para "Clock+L2(x)"** + Isso irá aumentar a taxa de quadros por segundo em muitos jogos, mas pode causar instabilidade em outros + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente + + Isto irá estragar o funcionamento do Homebrew Launcher na 11.3! 4. Aperte (Start) para salvar e reiniciar + Se você receber uma tela preta, basta continuar para a próxima seção + Se você receber um erro "Failed to mount CTRNAND", basta continuar para a próxima seção @@ -151,31 +152,33 @@ Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gost 1. Abra o aplicativo Informações sobre saúde e segurança (que agora é o FBI) 2. Selecione "SD" 3. Selecione a pasta "cias" -4. Navegue até `FBI.cia` e aperte (A) para instalar -5. Navegue até `hblauncher_loader.cia` e aperte (A) para instalar - + Por favor, note que o homebrew launcher atualmente não é funcional na 11.3.0 - + Isto deve ser corrigido em breve -6. Navegue até `lumaupdater.cia` e aperte (A) para instalar -7. Retorne para o diretório SD com (B) -8. Navegue até `arm9loaderhax.bin`, aperte (A) nele e selecione a opção "Copiar" -9. Retorne para o menu principal do FBI com (B) -10. Selecione "CTR NAND" -11. Selecione "\" -12. Selecione a opção "Paste", e então aperte (A) para confirmar -13. Saia com o botão HOME -14. Reinicialize seu dispositivo enquanto segura (Start) para iniciar o Hourglass9 -15. Vá para "SysNAND Backup/Restore", e então selecione "Health&Safety Inject" -16. Selecione `hs.app` (o original que não contém o FBI), e então aperte (A) para confirmar a injeção -17. Aperte (Select) no menu principal para ejetar seu cartão SD -18. Aperte (Start) para reiniciar sem o cartão SD +4. Selecione "\" +5. Selecione a opção "Install all CIAs" e, em seguida, aperte (A) para confirmar +6. Retorne para o diretório SD com (B) +7. Navegue até `arm9loaderhax.bin`, aperte (A) nele e selecione a opção "Copiar" +8. Retorne para o menu principal do FBI com (B) +9. Selecione "CTR NAND" +10. Selecione "\" +11. Selecione a opção "Paste", e então aperte (A) para confirmar +12. Saia com o botão HOME +13. Abra o Homebrew Launcher pelo menu HOME +14. Selecione "DSP Dump" +15. Aperte (Start) quando solicitado para sair +16. Aperte (Start) para abrir o menu de saída do Homebrew Launcher +17. Aperte (A) enquanto segura (Start) para reiniciar no Hourglass9 +18. Vá para "SysNAND Backup/Restore", e então selecione "Health&Safety Inject" +19. Selecione `hs.app` (o original que não contém o FBI), e então aperte (A) para confirmar a injeção +20. Aperte (Select) no menu principal para ejetar seu cartão SD +21. Aperte (Start) para reiniciar sem o cartão SD + Ao inicializar o dispositivo pelo menos uma vez com o cartão SD removido, você poderá configurar a instalação do Luma3DS baseada na CTRNAND 19. Use o botão (A) e os botões direcionais para ativar o seguinte: + **"Show NAND or user string in System Settings"** -20. Se você estiver usando um **New 3DS** você *também* pode habilitar o seguinte: +23. Se você estiver usando um **New 3DS** você *também* pode habilitar o seguinte: + **"New 3DS CPU" para "Clock+L2(x)"** + Isso irá aumentar a taxa de quadros por segundo em muitos jogos, mas pode causar instabilidade em outros + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente -21. Reinsira o seu cartão SD, e aperte (Start) para salvar e reiniciar! + + Isto irá estragar o funcionamento do Homebrew Launcher na 11.3! +24. Reinsira o seu cartão SD, e aperte (Start) para salvar e reiniciar! ___ diff --git a/_pages/pt_BR/Move-EmuNAND.txt b/_pages/pt_BR/Move-EmuNAND.txt index c28a2fc0c..9391ce404 100644 --- a/_pages/pt_BR/Move-EmuNAND.txt +++ b/_pages/pt_BR/Move-EmuNAND.txt @@ -48,4 +48,6 @@ Você vai PERDER seus saves do VC de GBA e DSiWare! 23. Aperte (Start) para reiniciar! 24. Se você ver uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_down) +___ + Voltar para [Instalando arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/pt_BR/Region-Changing.txt b/_pages/pt_BR/Region-Changing.txt index de6f0258a..68628c280 100644 --- a/_pages/pt_BR/Region-Changing.txt +++ b/_pages/pt_BR/Region-Changing.txt @@ -122,6 +122,8 @@ Mudar de região usando ctrtransfer (que é usado nesse método) parece fazer co 1. Aperte (Start) e depois segure (X) para reiniciar no modo arm9loaderhax do Decrypt9 2. Vá para "SysNAND Options", depois "System Save Inject", e selecione "Inject configsave.bin" +___ + Old 3DSs / 2DSs podem precisar ser formatados (usando TinyFormat ou a Configuração do Console) para jogar jogos com o modo de memória estendida (tais como Monster Hunter, Super Smash Bros, ou Pokémon Sun/Moon). {: .notice--info} diff --git a/_pages/pt_PT/9.2.0-ctrtransfer.txt b/_pages/pt_PT/9.2.0-ctrtransfer.txt index 6d426181c..61ead1549 100644 --- a/_pages/pt_PT/9.2.0-ctrtransfer.txt +++ b/_pages/pt_PT/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Se não tinhas nenhum ticket cujo nome começasse por 00- anteriormente, podes s 8. Pressiona (B) para rejeitar instalar tickets a partir de CDN. 9. Sai com o botão Home +___ + Se formatares um dispositivo depois de uma ctrtransfer sem restaurares as configurações guardadas, o ecrã poderá piscar ou ter problemas de brilho. Consulta [isto](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/pt_PT/Decrypt9-(Browser).txt b/_pages/pt_PT/Decrypt9-(Browser).txt index 70cd5e071..ec2f58cdb 100644 --- a/_pages/pt_PT/Decrypt9-(Browser).txt +++ b/_pages/pt_PT/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Se já tiveres modificado a tua 3DS utilizando um CFW com EmuNAND, este guia foc + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. Se a vulnerabilidade funcionou, estarás no Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt b/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt index 2d5852981..ba03fe577 100644 --- a/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/pt_PT/Decrypt9-(Homebrew-Launcher).txt @@ -30,5 +30,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_PT/Decrypt9-(MSET).txt b/_pages/pt_PT/Decrypt9-(MSET).txt index e1fa3d091..98eeb577e 100644 --- a/_pages/pt_PT/Decrypt9-(MSET).txt +++ b/_pages/pt_PT/Decrypt9-(MSET).txt @@ -30,5 +30,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continua para [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_PT/F3-(Linux).txt b/_pages/pt_PT/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/pt_PT/F3-(Linux).txt +++ b/_pages/pt_PT/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/pt_PT/F3X-(Mac).txt b/_pages/pt_PT/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/pt_PT/F3X-(Mac).txt +++ b/_pages/pt_PT/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/pt_PT/H2testw-(Windows).txt b/_pages/pt_PT/H2testw-(Windows).txt index 856f46c28..704f2828f 100644 --- a/_pages/pt_PT/H2testw-(Windows).txt +++ b/_pages/pt_PT/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Esta página é só para utilizadores de Windows. Se não estiveres no Windows, 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/pt_PT/Homebrew-Launcher-(Soundhax).txt b/_pages/pt_PT/Homebrew-Launcher-(Soundhax).txt index 53b18bb81..22e75191a 100644 --- a/_pages/pt_PT/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/pt_PT/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax é compatível com as versões 9.0.0 até à 11.2.0 nas regiões EUR, J + If it freezes, just force the console to power off by holding the power button, then try again 8. A tua consola deverá carregar o Homebrew Launcher +___ + Continua para [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/pt_PT/Installing-arm9loaderhax.txt b/_pages/pt_PT/Installing-arm9loaderhax.txt index 73e805f08..ef04851ae 100644 --- a/_pages/pt_PT/Installing-arm9loaderhax.txt +++ b/_pages/pt_PT/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Sai com o botão Home -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Sai com o botão Home +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/pt_PT/Move-EmuNAND.txt b/_pages/pt_PT/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/pt_PT/Move-EmuNAND.txt +++ b/_pages/pt_PT/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/pt_PT/Region-Changing.txt b/_pages/pt_PT/Region-Changing.txt index 2d6dd703e..7d35b66b5 100644 --- a/_pages/pt_PT/Region-Changing.txt +++ b/_pages/pt_PT/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/ro_RO/9.2.0-ctrtransfer.txt b/_pages/ro_RO/9.2.0-ctrtransfer.txt index 382e1ebf6..5304d9953 100644 --- a/_pages/ro_RO/9.2.0-ctrtransfer.txt +++ b/_pages/ro_RO/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Dacă nu ați avut nici un ticket începând cu 00- mai devreme, puteți sări p 8. Apăsați (B) pentru a refuza instalarea ticketelor din CDN. 9. Ieşiţi cu butonul home +___ + Formatând un dispozitiv în urma unui ctrtransfer *fără a restaura salvarea config-urilor* poate provoca probleme cu luminozitatea/pâlpâirea ecranului. Vedeți [asta](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/ro_RO/Decrypt9-(Browser).txt b/_pages/ro_RO/Decrypt9-(Browser).txt index 7ccc95b62..8639160e6 100644 --- a/_pages/ro_RO/Decrypt9-(Browser).txt +++ b/_pages/ro_RO/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Daca v-ați modat deja 3DS-ul înainte și aveți un setup cu CFW bazat pe EmuNA + Dacă primiți vreo eroare, [urmați acest ghid](troubleshooting#ts_browser) 5. Dacă exploatarea a avut loc cu succes, o să fiți în Decrypt9 acum +___ + Continuați la [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt b/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt index 7ae08ce77..fedd9718c 100644 --- a/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ro_RO/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /ro_RO/decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. Dacă exploatarea a avut loc cu succes, ar trebui să fiți în Decrypt9 acum +___ + Continuati la [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/Decrypt9-(MSET).txt b/_pages/ro_RO/Decrypt9-(MSET).txt index 810cc105b..a3f7d7b3a 100644 --- a/_pages/ro_RO/Decrypt9-(MSET).txt +++ b/_pages/ro_RO/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Dacă v-ați modat deja 3DS-ul înainte și aveți un setup cu CFW bazat pe EmuN 8. Dați restart la consolă, intrați în System Settings, apoi "Other Settings", apoi "Profile", apoi "Nintendo DS Profile" 9. Dacă exploatarea a avut loc cu succes, ar trebui să fiți în Decrypt9 acum +___ + Continuați la [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/F3-(Linux).txt b/_pages/ro_RO/F3-(Linux).txt index 45f191c21..5b22d2e0a 100644 --- a/_pages/ro_RO/F3-(Linux).txt +++ b/_pages/ro_RO/F3-(Linux).txt @@ -51,6 +51,7 @@ Această pagină este doar pentru utilizatorii de Linux. Dacă nu sunteți pe Li Suprascrise: 0.00 octet (sectoarele 0) Viteză medie de citire: 9.42 MB/s +___ În cazul în care testul prezinta rezultatul ' date PIERDUTE: 0.00 octet (0 sectoare)' cardul SD este bun şi puteţi şterge toate fişierele de '.h2w' pe cardul SD {: .notice--success} diff --git a/_pages/ro_RO/F3X-(Mac).txt b/_pages/ro_RO/F3X-(Mac).txt index 432fa06f9..edc69a7bb 100644 --- a/_pages/ro_RO/F3X-(Mac).txt +++ b/_pages/ro_RO/F3X-(Mac).txt @@ -26,6 +26,8 @@ Această pagină este doar pentru utilizatorii de Mac. Dacă nu sunteți pe un M 5. Apăsaţi "Start Test" 6. Așteptați până când procesul este terminat. +___ + Dacă testul afișează rezultatul 'Success! Your card is ok!' cardul SD este bun și puteți șterge toate fișierele '.h2w' de pe cardul SD {: .notice--success} diff --git a/_pages/ro_RO/H2testw-(Windows).txt b/_pages/ro_RO/H2testw-(Windows).txt index 785f4f48d..d31ed0bde 100644 --- a/_pages/ro_RO/H2testw-(Windows).txt +++ b/_pages/ro_RO/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Această pagină este doar pentru utilizatorii de Windows. Dacă nu sunteți pe 8. Apăsați pe "Write + Verify" 9. Așteptați până când procesul este terminat +___ + Dacă testul arată rezultatul `Test finished without errors`, cardul dumneavoastră SD este bun și puteți șterge toate fișierele `.h2w` de pe card {: .notice--success} diff --git a/_pages/ro_RO/Homebrew-Launcher-(Soundhax).txt b/_pages/ro_RO/Homebrew-Launcher-(Soundhax).txt index 3455361a1..6d9668b47 100644 --- a/_pages/ro_RO/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ro_RO/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax este compatibil cu versiunile 9.0.0 până la 11.2.0 în regiunile EUR, + Dacă se blochează, închideți consola forțat ținând apăsat butonul de Power și încercați din nou 8. Consola dumneavoastră ar trebui să încarce meniul homebrew +___ + Continuă la [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ro_RO/Installing-arm9loaderhax.txt b/_pages/ro_RO/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/ro_RO/Installing-arm9loaderhax.txt +++ b/_pages/ro_RO/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/ro_RO/Move-EmuNAND.txt b/_pages/ro_RO/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/ro_RO/Move-EmuNAND.txt +++ b/_pages/ro_RO/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/ro_RO/Region-Changing.txt b/_pages/ro_RO/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/ro_RO/Region-Changing.txt +++ b/_pages/ro_RO/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/ru_RU/9.2.0-ctrtransfer.txt b/_pages/ru_RU/9.2.0-ctrtransfer.txt index de57e1ee8..34dc67b0d 100644 --- a/_pages/ru_RU/9.2.0-ctrtransfer.txt +++ b/_pages/ru_RU/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ permalink: /ru_RU/9.2.0-ctrtransfer.html 8. Нажмите (B) для отмены установки тикетов из CDN. 9. Выйдите из FBI нажатием кнопки (Home) +___ + Форматирование устройства в ходе ctrtransfer, *без восстановления сохраненной конфигурации*, может привести к проблемам с яркостью и мерцанием экрана. Подробнее [здесь](https://github.com/Plailect/Guide/issues/794) (англ.). {: .notice--info} diff --git a/_pages/ru_RU/Decrypt9-(Browser).txt b/_pages/ru_RU/Decrypt9-(Browser).txt index e20152d75..33e14bab4 100644 --- a/_pages/ru_RU/Decrypt9-(Browser).txt +++ b/_pages/ru_RU/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ permalink: /ru_RU/decrypt9-(browser).html + При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#ts_browser) 5. Если эксплойт сработал, запустится Decrypt9 +___ + Следующий шаг: [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt b/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt index d4968da44..aec107c4f 100644 --- a/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/ru_RU/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /ru_RU/decrypt9-(homebrew-launcher).html + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова 10. Если эксплойт сработал верно, запустится Decrypt9 +___ + Следующий шаг: [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ru_RU/Decrypt9-(MSET).txt b/_pages/ru_RU/Decrypt9-(MSET).txt index 3036d5604..7be8c9e40 100644 --- a/_pages/ru_RU/Decrypt9-(MSET).txt +++ b/_pages/ru_RU/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ permalink: /ru_RU/decrypt9-(mset).html 8. Перезагрузите консоль, зайдите в "Системные настройки", затем"Прочие настройки" (Other Settings), затем "Профиль" (Profile), затем "Профиль Nintendo DS" (Nintendo DS Profile) 9. Если эксплойт сработал верно, запустится Decrypt9 +___ + Следующий шаг: [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/ru_RU/F3-(Linux).txt b/_pages/ru_RU/F3-(Linux).txt index e5375c64f..272cc54f4 100644 --- a/_pages/ru_RU/F3-(Linux).txt +++ b/_pages/ru_RU/F3-(Linux).txt @@ -51,6 +51,7 @@ permalink: /ru_RU/f3-(linux).html Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Если в результате тестирования вы видите `Data LOST: 0.00 Byte (0 sectors)`, ваша SD-карта в порядке. Можете удалить все файлы с расширением `.h2w` на SD-карте {: .notice--success} diff --git a/_pages/ru_RU/F3X-(Mac).txt b/_pages/ru_RU/F3X-(Mac).txt index ab669ac17..60ea98e16 100644 --- a/_pages/ru_RU/F3X-(Mac).txt +++ b/_pages/ru_RU/F3X-(Mac).txt @@ -26,6 +26,8 @@ permalink: /ru_RU/f3x-(mac).html 5. Нажмите "Start Test" 6. Дождитесь окончания проверки. +___ + Если в результате тестирования вы видите `Success! Your card is ok!`, ваша карта в порядке. Можете удалить все файлы с расширением `.h2w` на SD-карте {: .notice--success} diff --git a/_pages/ru_RU/H2testw-(Windows).txt b/_pages/ru_RU/H2testw-(Windows).txt index 5778c714e..303ed71ae 100644 --- a/_pages/ru_RU/H2testw-(Windows).txt +++ b/_pages/ru_RU/H2testw-(Windows).txt @@ -29,6 +29,8 @@ permalink: /ru_RU/h2testw-(windows).html 8. Нажмите "Write + Verify" 9. Дождитесь окончания проверки +___ + Если в результате тестирования вы видите `Test finished without errors`, ваша SD-карта в порядке. Можете удалить все файлы с расширением `.h2w` с SD-карты {: .notice--success} diff --git a/_pages/ru_RU/Homebrew-Launcher-(Soundhax).txt b/_pages/ru_RU/Homebrew-Launcher-(Soundhax).txt index 4dde9b5f3..7544474b6 100644 --- a/_pages/ru_RU/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/ru_RU/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax совместим с версиями прошивки от 9.0.0 до + При зависании отключите питание консоли, зажав кнопку питания, и попробуйте снова 8. Консоль должна загрузиться в Homebrew Launcher +___ + Следующий шаг: [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/ru_RU/Installing-arm9loaderhax.txt b/_pages/ru_RU/Installing-arm9loaderhax.txt index c4c6e12ea..20f97c6ab 100644 --- a/_pages/ru_RU/Installing-arm9loaderhax.txt +++ b/_pages/ru_RU/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ permalink: /ru_RU/installing-arm9loaderhax.html + **"New 3DS CPU" выбрать значение "Clock+L2(x)"** + Это увеличит частоту кадров в множестве игр, но может отразиться на стабильности других + Если какие-либо игры работают некорректно, отключите эту опцию + + This breaks the Homebrew Launcher on 11.3! 4. Нажмите (Start), чтобы сохранить настройки и перезагрузиться + Если после включения экран остаётся чёрным, просто переходите к следующей части + Если появляется ошибка "Failed to mount CTRNAND", просто переходите к следующей части @@ -151,31 +152,33 @@ permalink: /ru_RU/installing-arm9loaderhax.html 1. Запустите "Информация о здоровье и безопасности" (Health and Safety) (теперь это FBI) 2. Выберите "SD" 3. Перейдите в папку "cias" -4. Выберите файл `FBI.cia` и нажмите (A), чтобы установить его -5. Выберите файл `hblauncher_loader.cia` и нажмите (A), чтобы установить его - + Обратите внимание, что на данный момент homebrew launcher не работает на 11.3.0 - + Надеемся, что скоро это будет исправлено -6. Выберите файл `lumaupdater.cia` и нажмите (A), чтобы установить его -7. Нажмите (B), чтобы вернуться в папку "SD" -8. Выберите файл `arm9loaderhax.bin`, нажмите (A) и выберите “Copy” -9. Нажмите (B), чтобы вернуться в главное меню FBI -10. Выберите "CTR NAND" -11. Выберите "\" -12. Выберите "Paste", затем нажмите (A) для подтверждения -13. Выйдите из FBI нажатием кнопки (Home) -14. Перезагрузите приставку, удерживая (Start) для входа в Hourglass9 -15. Перейдите в "SysNAND Backup/Restore", затем "Health&Safety Inject" -16. Выберите `hs.app` (оригинальный файл, не содержащий FBI), нажмите (A) для подтверждения -17. Нажмите (Select) в главном меню Hourglass9, чтобы извлечь SD-карту -18. Нажмите (Start) для перезагрузки с извлеченной SD-картой +4. Выберите "\" +5. Выберите "Install all CIAs" и нажмите (A) для подтверждения +6. Нажмите (B), чтобы вернуться в папку "SD" +7. Выберите файл `arm9loaderhax.bin`, нажмите (A) и выберите “Copy” +8. Нажмите (B), чтобы вернуться в главное меню FBI +9. Выберите "CTR NAND" +10. Выберите "\" +11. Выберите "Paste", затем нажмите (A) для подтверждения +12. Выйдите из FBI нажатием кнопки (Home) +13. Запустите Homebrew Launcher из меню HOME +14. Выберите "DSP Dump" +15. После завершения нажмите (Start) для выхода +16. Нажмите (Start), чтобы открыть меню выхода из Homebrew Launcher +17. Нажмите (A), удерживая (Start), чтобы перезагрузиться в Hourglass9 +18. Перейдите в "SysNAND Backup/Restore", затем "Health&Safety Inject" +19. Выберите `hs.app` (оригинальный файл, не содержащий FBI), нажмите (A) для подтверждения +20. Нажмите (Select) в главном меню Hourglass9, чтобы извлечь SD-карту +21. Нажмите (Start) для перезагрузки с извлеченной SD-картой + Для того, чтобы настроить Luma3DS, установленную в раздел CTRNAND, необходимо хотя бы раз загрузить консоль с извлеченной SD-картой. -19. Нажимая (A) выберите следующие пункты: +22. Нажимая (A) выберите следующие пункты: + **"Show NAND or user string in System Settings"** -20. Если у вас **New 3DS**, вы *также* можете включить следующие опции: +23. Если у вас **New 3DS**, вы *также* можете включить следующие опции: + **"New 3DS CPU" выбрать значение "Clock+L2(x)"** + Это увеличит частоту кадров в множестве игр, но может отразиться на стабильности других + Если какие-либо игры работают некорректно, отключите эту опцию -21. Вставьте SD-карту в приставку и нажмите (Start) для того, чтобы сохранить настройки и перезагрузить приставку! + + This breaks the Homebrew Launcher on 11.3! +24. Вставьте SD-карту в приставку и нажмите (Start) для того, чтобы сохранить настройки и перезагрузить приставку! ___ diff --git a/_pages/ru_RU/Move-EmuNAND.txt b/_pages/ru_RU/Move-EmuNAND.txt index b7059b7fd..86567acdf 100644 --- a/_pages/ru_RU/Move-EmuNAND.txt +++ b/_pages/ru_RU/Move-EmuNAND.txt @@ -48,4 +48,6 @@ permalink: /ru_RU/move-emunand.html 23. Нажмите (Start) для перезагрузки! 24. Если после включения экран остаётся чёрным, перейдите к разделу с [проблемами и их решениями](troubleshooting#ts_sys_down) +___ + Вернитесь в раздел [Установка arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/ru_RU/Region-Changing.txt b/_pages/ru_RU/Region-Changing.txt index 3313a410f..076b44ea8 100644 --- a/_pages/ru_RU/Region-Changing.txt +++ b/_pages/ru_RU/Region-Changing.txt @@ -122,6 +122,8 @@ permalink: /ru_RU/region-changing.html 1. Нажмите (Start), и удерживайте (X), чтобы запустить Decrypt9 2. Перейдите в "SysNAND Options", затем "System Save Inject", затем выберите "Inject configsave.bin" +___ + Для Old 3DS / 2DS может потребоваться форматирование (используя TinyFormat или Системные настройки), иначе игры требующие режима расширенной памяти могут не заработать (Monster Hunter, Super Smash Bros, Pokemon Sun/Moon, и т. п.). {: .notice--info} diff --git a/_pages/sr_SP/9.2.0-ctrtransfer.txt b/_pages/sr_SP/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/sr_SP/9.2.0-ctrtransfer.txt +++ b/_pages/sr_SP/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/sr_SP/Decrypt9-(Browser).txt b/_pages/sr_SP/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/sr_SP/Decrypt9-(Browser).txt +++ b/_pages/sr_SP/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt b/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/sr_SP/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/sr_SP/Decrypt9-(MSET).txt b/_pages/sr_SP/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/sr_SP/Decrypt9-(MSET).txt +++ b/_pages/sr_SP/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/sr_SP/F3-(Linux).txt b/_pages/sr_SP/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/sr_SP/F3-(Linux).txt +++ b/_pages/sr_SP/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sr_SP/F3X-(Mac).txt b/_pages/sr_SP/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/sr_SP/F3X-(Mac).txt +++ b/_pages/sr_SP/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sr_SP/H2testw-(Windows).txt b/_pages/sr_SP/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/sr_SP/H2testw-(Windows).txt +++ b/_pages/sr_SP/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt b/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/sr_SP/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/sr_SP/Installing-arm9loaderhax.txt b/_pages/sr_SP/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/sr_SP/Installing-arm9loaderhax.txt +++ b/_pages/sr_SP/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/sr_SP/Move-EmuNAND.txt b/_pages/sr_SP/Move-EmuNAND.txt index 6f7a18da6..0b946d6aa 100644 --- a/_pages/sr_SP/Move-EmuNAND.txt +++ b/_pages/sr_SP/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 23. Press (Start) to reboot! 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/sr_SP/Region-Changing.txt b/_pages/sr_SP/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/sr_SP/Region-Changing.txt +++ b/_pages/sr_SP/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/sv_SE/9.2.0-ctrtransfer.txt b/_pages/sv_SE/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/sv_SE/9.2.0-ctrtransfer.txt +++ b/_pages/sv_SE/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/sv_SE/Decrypt9-(Browser).txt b/_pages/sv_SE/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/sv_SE/Decrypt9-(Browser).txt +++ b/_pages/sv_SE/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt b/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/sv_SE/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/sv_SE/Decrypt9-(MSET).txt b/_pages/sv_SE/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/sv_SE/Decrypt9-(MSET).txt +++ b/_pages/sv_SE/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/sv_SE/F3-(Linux).txt b/_pages/sv_SE/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/sv_SE/F3-(Linux).txt +++ b/_pages/sv_SE/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sv_SE/F3X-(Mac).txt b/_pages/sv_SE/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/sv_SE/F3X-(Mac).txt +++ b/_pages/sv_SE/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sv_SE/H2testw-(Windows).txt b/_pages/sv_SE/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/sv_SE/H2testw-(Windows).txt +++ b/_pages/sv_SE/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/sv_SE/Homebrew-Launcher-(Soundhax).txt b/_pages/sv_SE/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/sv_SE/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/sv_SE/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/sv_SE/Installing-arm9loaderhax.txt b/_pages/sv_SE/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/sv_SE/Installing-arm9loaderhax.txt +++ b/_pages/sv_SE/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/sv_SE/Move-EmuNAND.txt b/_pages/sv_SE/Move-EmuNAND.txt index 6f7a18da6..0b946d6aa 100644 --- a/_pages/sv_SE/Move-EmuNAND.txt +++ b/_pages/sv_SE/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 23. Press (Start) to reboot! 24. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/sv_SE/Region-Changing.txt b/_pages/sv_SE/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/sv_SE/Region-Changing.txt +++ b/_pages/sv_SE/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/tr_TR/9.2.0-ctrtransfer.txt b/_pages/tr_TR/9.2.0-ctrtransfer.txt index 55944d43d..3fc7f9043 100644 --- a/_pages/tr_TR/9.2.0-ctrtransfer.txt +++ b/_pages/tr_TR/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ Cihazınız, ctrtransfer işleminden sonra yüklü oyunlarınızı göstermeyebi 8. CDN'den ticket yüklemeyi reddetmek için (B) tuşuna basın. 9. Home tuşu ile çıkın +___ + Bir aygıtı ctrtransfer işleminden sonra *ayarları geri yüklemeden * biçimlendirmek ekran parlaklığı / titreklik sorunlarına neden olabilir. Buraya bakın [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/tr_TR/Decrypt9-(Browser).txt b/_pages/tr_TR/Decrypt9-(Browser).txt index 190c7ce4b..c1b58da47 100644 --- a/_pages/tr_TR/Decrypt9-(Browser).txt +++ b/_pages/tr_TR/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ Daha önce 3DS'nizi hacklediyseniz ve EmuNAND tabanlı CFW'ye sahipseniz, bu reh Eğer hata alırsanız.[bu sorun giderme rehberini takip edin](troubleshooting#ts_browser) 5. Açıktan yararlanma başarılı olduysa, Decrypt9 başlayacaktır +___ + Devam [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt b/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt index d164be336..a6773d9e8 100644 --- a/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/tr_TR/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /tr_TR/decrypt9-(homebrew-launcher).html + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin 10. Açıktan yararlanma başarılı olduysa, Decrypt9 başlaycaktır +___ + Devam [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/Decrypt9-(MSET).txt b/_pages/tr_TR/Decrypt9-(MSET).txt index 39d3ae6f5..5857910e4 100644 --- a/_pages/tr_TR/Decrypt9-(MSET).txt +++ b/_pages/tr_TR/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ Daha önce 3DS'nizi hacklediyseniz ve EmuNAND tabanlı CFW'ye sahipseniz, bu reh 8. Sistemi yeniden başlatın, daha sonra Sistem ayrlarına gidin, sonra "Other Settings", sonra "Profile", en son "Nintendo DS Profile" gidin 9. Açıktan yararlanma başarılı olduysa, Decrypt9 başlaycaktır +___ + Devam [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/F3-(Linux).txt b/_pages/tr_TR/F3-(Linux).txt index 1fb8a9b75..af45509a1 100644 --- a/_pages/tr_TR/F3-(Linux).txt +++ b/_pages/tr_TR/F3-(Linux).txt @@ -51,6 +51,7 @@ Bu sayfa yalnızca Linux kullanıcıları içindir. Linux üzerinde değilseniz, Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ Test, 'Data LOST: 0,00 Byte (0 sectors)' sonucunu gösteriyorsa, SD kartınız iyidir ve SD karttaki tüm `.h2w` dosyalarını silebilirsiniz {: .notice--success} diff --git a/_pages/tr_TR/F3X-(Mac).txt b/_pages/tr_TR/F3X-(Mac).txt index 8267cfd8c..612a405b7 100644 --- a/_pages/tr_TR/F3X-(Mac).txt +++ b/_pages/tr_TR/F3X-(Mac).txt @@ -26,6 +26,8 @@ Bu sayfa yalnızca Mac kullanıcılar içindir. Mac üzerinde değilseniz, buray 5. "Start Test" basın 6. İşlem tamamlanana kadar bekleyin. +___ + Test sonucu `Success! Your card is ok!` gösteriyorsa SD kartınız iyi durumdadır ve kartınızdaki tüm `.h2w` dosyalarını silebilirsiniz {: .notice--success} diff --git a/_pages/tr_TR/H2testw-(Windows).txt b/_pages/tr_TR/H2testw-(Windows).txt index ba3e2e7cc..0c6df18ea 100644 --- a/_pages/tr_TR/H2testw-(Windows).txt +++ b/_pages/tr_TR/H2testw-(Windows).txt @@ -29,6 +29,8 @@ Bu sayfa yalnızca Windows kullanıcıları içindir. Windows üzerinde değilse 8. "Write + Verify" tıklayın 9. İşlem tamamlanana kadar bekleyin +___ + Test, 'Test finished without errors' sonucunu gösteriyorsa SD kartınız iyidir ve SD karttaki tüm `.h2w` dosyalarını silebilirsiniz {: .notice--success} diff --git a/_pages/tr_TR/Homebrew-Launcher-(Soundhax).txt b/_pages/tr_TR/Homebrew-Launcher-(Soundhax).txt index a284ce6fc..a107425d4 100644 --- a/_pages/tr_TR/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/tr_TR/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ Soundhax; EUR, JPN, KOR ve USA bölge cihazlarda 9.0.0,'dan 11.2.0'a kadar olan + Eğer donarsa, konsolun kapatma tuşuna konsol kapanana kadar basın, sonra tekrar deneyin 8. Konsolunuz Homebrew Launcher'ı yüklemiş olmalı +___ + [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) adımına devam et {: .notice--primary} \ No newline at end of file diff --git a/_pages/tr_TR/Installing-arm9loaderhax.txt b/_pages/tr_TR/Installing-arm9loaderhax.txt index 7eb63888b..31963d6f6 100644 --- a/_pages/tr_TR/Installing-arm9loaderhax.txt +++ b/_pages/tr_TR/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz: + **"New 3DS CPU" to "Clock+L2(x)"** +Bu oyunlarda framerate'i artırır ancak diğerlerinde stabiliteyi bozabilir + Bazı oyunlar düzgün çalışmazsa, bu seçeneğini devre dışı bırakın ve tekrar deneyin + + Bu 11.3'de Homebrew Launcher'ı bozar! 4. Kaydedip yeniden başlatmak için (Start) basın + Siyah ekran alırsanız yine de bir sonraki bölüme geçin + "Failed to mount CTRNAND" hatası alırsanız yine de bir sonraki bölüme geçin @@ -151,31 +152,33 @@ Bu rehberi takip etmeden önce eğer zaten bir EmuNAND kurduysanız ve EmuNAND i 1. Health and Safety (şu an da FBI) uygulamasını açın 2. "SD" 'yi seçin 3. "cias" 'i seçin -4. 'FBI.cia' gidin ve yüklemek için (A) tuşuna basın -5. 'hblauncher_loader.cia' gidin ve yüklemek için (A) tuşuna basın - + Homebrew launcher şu an 11.3.0 sürümünde çalışmamaktadır - + Yakında bu durum düzelicektir -6. 'Lumaupdater.cia' gidin ve yüklemek için (A) tuşuna basın -7. (B) ile SD dizinine dönün -8. 'Arm9loaderhax.bin', gidin sonra üzerinde (A) basın ve "Copy" seçeneğini seçin -9. (B) tuşu ile FBI ana menüsüne dönün -10. "CTR NAND" seçin -11. "\" 'i seçin -12. "Paste" seçeneğini seçin, sonra onaylamak için (A) tuşuna basın -13. Home tuşu ile çıkın -14. Hourglass9'a girmek için konsolu açarken (Start) basılı tutun -15. "SysNAND Backup/Restore" gidin ve daha sonra "Health&Safety Inject" seçin -16. 'hs.app' (orijinal olanı FBI içermez) seçin ve (A) tuşuna basın ve enjekte etmek için onaylayın -17. Ana menüdeyken SD kartı çıkarmak için (Select) basın -18. SD kart dışarıdayken yeniden başlatmak için (Start) basın +4. "\" 'i seçin +5. "Install all CIAs" seçeneğini seçin, onaylamak için (A) basın +6. (B) ile SD dizinine dönün +7. 'Arm9loaderhax.bin', gidin sonra üzerinde (A) basın ve "Copy" seçeneğini seçin +8. (B) tuşu ile FBI ana menüsüne dönün +9. "CTR NAND" seçin +10. "\" 'i seçin +11. "Paste" seçeneğini seçin, sonra onaylamak için (A) tuşuna basın +12. Home tuşu ile çıkın +13. Ana menüden Homebrew Launcher'ı başlatın +14. "DSP dump" seçin +15. Çıkmak isteyip istemediğiniz sorulduğunda (Start) tuşuna basın +16. Homebrew Launcher çıkış menüsünü açmak için (Start) basın +17. Hourglass9'a girmek için açarken (Start) basılı tutarken (A) basın +18. "SysNAND Backup/Restore" gidin ve daha sonra "Health&Safety Inject" seçin +19. 'hs.app' (orijinal olanı FBI içermez) seçin ve (A) tuşuna basın ve enjekte etmek için onaylayın +20. Ana menüdeyken SD kartı çıkarmak için (Select) basın +21. SD kart dışarıdayken yeniden başlatmak için (Start) basın + SD kartı dışardayken aygıtı en az bir kez açmanız CTRNAND tabanlı luma kurulumunu yapılandırmanızı sağlayacaktır -19. (A) düğmesi ve D-Pad kullanarak aşağıdakileri açın: +22. (A) düğmesi ve D-Pad kullanarak aşağıdakileri açın: + **"Show NAND or user string in System Settings"** -20. **New 3DS** kullanıyorsanız bunu *ayrıca* açmanız gerekir: +23. **New 3DS** kullanıyorsanız bunu *ayrıca* açmanız gerekir: + **"New 3DS CPU" to "Clock+L2(x)"** +Bu oyunlarda framerate'i artırır ancak diğerlerinde stabiliteyi bozabilir + Bazı oyunlar düzgün çalışmazsa, bu seçeneğini devre dışı bırakın ve tekrar deneyin -21. SD kartınızı tekrar takın, ardından kaydetmek ve yeniden başlatmak için (Start)'a basın! + + Bu 11.3'de Homebrew Launcher'ı bozar! +24. SD kartınızı tekrar takın, ardından kaydetmek ve yeniden başlatmak için (Start)'a basın! ___ diff --git a/_pages/tr_TR/Move-EmuNAND.txt b/_pages/tr_TR/Move-EmuNAND.txt index 904cd60fe..4f4b8f9e7 100644 --- a/_pages/tr_TR/Move-EmuNAND.txt +++ b/_pages/tr_TR/Move-EmuNAND.txt @@ -48,4 +48,6 @@ GBA VC ve DSiWare kayıtlarınız SİLİNECEK! 23. Start'a basarak yeniden başlatın! 24. + Siyah ekran alıyorsanız, [bu sorun giderme rehberine bakın](troubleshooting#ts_sys_a9lh) +___ + Buraya dönün [arm9loaderhax yükleme](installing-arm9loaderhax). diff --git a/_pages/tr_TR/Region-Changing.txt b/_pages/tr_TR/Region-Changing.txt index e17d091b6..1210a3709 100644 --- a/_pages/tr_TR/Region-Changing.txt +++ b/_pages/tr_TR/Region-Changing.txt @@ -122,6 +122,8 @@ ctrtransfer (bu yöntemin kullandığı) kullanarak bölge değiştirme, yeniden 1. arm9loaderhax Decrypt9 girmek için (Start) basın ve sonra (X) basılı tutun 2. "SysNAND Options" gidin, sonra "System Save Inject", daha sonra "Inject configsave.bin" seçin +___ + Genişletilmiş bellek modu oyunlarını oynatmak için Old 3DS / 2DS'lerin formatlanması (TinyFormat veya Sistem Ayarları kullanılarak) gerekebilir.(Monster Hunter, Super Smash Bros, ya da Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/uk_UA/9.2.0-ctrtransfer.txt b/_pages/uk_UA/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/uk_UA/9.2.0-ctrtransfer.txt +++ b/_pages/uk_UA/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/uk_UA/Decrypt9-(Browser).txt b/_pages/uk_UA/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/uk_UA/Decrypt9-(Browser).txt +++ b/_pages/uk_UA/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt b/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/uk_UA/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/uk_UA/Decrypt9-(MSET).txt b/_pages/uk_UA/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/uk_UA/Decrypt9-(MSET).txt +++ b/_pages/uk_UA/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/uk_UA/F3-(Linux).txt b/_pages/uk_UA/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/uk_UA/F3-(Linux).txt +++ b/_pages/uk_UA/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/uk_UA/F3X-(Mac).txt b/_pages/uk_UA/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/uk_UA/F3X-(Mac).txt +++ b/_pages/uk_UA/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/uk_UA/H2testw-(Windows).txt b/_pages/uk_UA/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/uk_UA/H2testw-(Windows).txt +++ b/_pages/uk_UA/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/uk_UA/Homebrew-Launcher-(Soundhax).txt b/_pages/uk_UA/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/uk_UA/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/uk_UA/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/uk_UA/Installing-arm9loaderhax.txt b/_pages/uk_UA/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/uk_UA/Installing-arm9loaderhax.txt +++ b/_pages/uk_UA/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/uk_UA/Move-EmuNAND.txt b/_pages/uk_UA/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/uk_UA/Move-EmuNAND.txt +++ b/_pages/uk_UA/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/uk_UA/Region-Changing.txt b/_pages/uk_UA/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/uk_UA/Region-Changing.txt +++ b/_pages/uk_UA/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/vi_VN/9.2.0-ctrtransfer.txt b/_pages/vi_VN/9.2.0-ctrtransfer.txt index a93866194..d0d95a5d9 100644 --- a/_pages/vi_VN/9.2.0-ctrtransfer.txt +++ b/_pages/vi_VN/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ If you had no tickets beginning with 00- earlier, you can skip this section. 8. Press (B) to decline installing tickets from CDN. 9. Exit with the home button +___ + Formatting a device following a ctrtransfer *without restoring the config save* can cause screen brightness / flickering issues. See [this](https://github.com/Plailect/Guide/issues/794). {: .notice--info} diff --git a/_pages/vi_VN/Decrypt9-(Browser).txt b/_pages/vi_VN/Decrypt9-(Browser).txt index b667eafd7..e6818ef6b 100644 --- a/_pages/vi_VN/Decrypt9-(Browser).txt +++ b/_pages/vi_VN/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t + If you get an error, [follow this troubleshooting guide](troubleshooting#ts_browser) 5. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt b/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt index feea2cb10..90caa8428 100644 --- a/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/vi_VN/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /decrypt9-(homebrew-launcher).html + If it freezes, just force the console to power off by holding the power button, then try again 10. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/vi_VN/Decrypt9-(MSET).txt b/_pages/vi_VN/Decrypt9-(MSET).txt index 6eae08ad6..52f5ed5a6 100644 --- a/_pages/vi_VN/Decrypt9-(MSET).txt +++ b/_pages/vi_VN/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ If you have already hacked your 3DS before and have a EmuNAND based CFW setup, t 8. Reboot the system, then go to System Settings, then "Other Settings", then "Profile", then "Nintendo DS Profile" 9. If the exploit was successful, you will have booted into Decrypt9 +___ + Continue to [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/vi_VN/F3-(Linux).txt b/_pages/vi_VN/F3-(Linux).txt index 890819207..416d63e29 100644 --- a/_pages/vi_VN/F3-(Linux).txt +++ b/_pages/vi_VN/F3-(Linux).txt @@ -51,6 +51,7 @@ This page is for Linux users only. If you are not on Linux, check out the [H2tes Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/vi_VN/F3X-(Mac).txt b/_pages/vi_VN/F3X-(Mac).txt index 6fd4ba68f..efaaf39d9 100644 --- a/_pages/vi_VN/F3X-(Mac).txt +++ b/_pages/vi_VN/F3X-(Mac).txt @@ -26,6 +26,8 @@ This page is for Mac users only. If you are not on Mac, check out the [H2testw ( 5. Press "Start Test" 6. Wait until the process is complete. +___ + If the test shows the result `Success! Your card is ok!` your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/vi_VN/H2testw-(Windows).txt b/_pages/vi_VN/H2testw-(Windows).txt index 6c672b9a8..062fc1b74 100644 --- a/_pages/vi_VN/H2testw-(Windows).txt +++ b/_pages/vi_VN/H2testw-(Windows).txt @@ -29,6 +29,8 @@ This page is for Windows users only. If you are not on windows, check out the [F 8. Click "Write + Verify" 9. Wait until the process is completed +___ + If the test shows the result `Test finished without errors`, your SD card is good and you can delete all `.h2w` files on the SD card {: .notice--success} diff --git a/_pages/vi_VN/Homebrew-Launcher-(Soundhax).txt b/_pages/vi_VN/Homebrew-Launcher-(Soundhax).txt index 249543c1a..95600b563 100644 --- a/_pages/vi_VN/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/vi_VN/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax is compatible with versions 9.0.0 through 11.2.0 in the EUR, JPN, KOR, + If it freezes, just force the console to power off by holding the power button, then try again 8. Your console should load the Homebrew Launcher +___ + Continue to [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/vi_VN/Installing-arm9loaderhax.txt b/_pages/vi_VN/Installing-arm9loaderhax.txt index b6843f4bc..b95581a61 100644 --- a/_pages/vi_VN/Installing-arm9loaderhax.txt +++ b/_pages/vi_VN/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ During this process, we also setup programs such as the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again + + This breaks the Homebrew Launcher on 11.3! 4. Press (Start) to save and reboot + If you get a black screen, just continue to the next section + If you get a "Failed to mount CTRNAND" error, just continue to the next section @@ -151,31 +152,33 @@ If, before following this guide, you already had an EmuNAND setup and would like 1. Open Health and Safety (which is now FBI) 2. Select "SD" 3. Select "cias" -4. Navigate to `FBI.cia` and press (A) to install -5. Navigate to `hblauncher_loader.cia` and press (A) to install - + Please note that the homebrew launcher is currently not functional on 11.3.0 - + This should hopefully be fixed soon -6. Navigate to `lumaupdater.cia` and press (A) to install -7. Return to the SD directory with (B) -8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option -9. Return to the FBI main menu with (B) -10. Select "CTR NAND" -11. Select "\" -12. Select the "Paste" option, then press (A) to confirm -13. Exit with the home button -14. Reboot your device while holding (Start) to enter Hourglass9 -15. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" -16. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject -17. Press (Select) on the main menu to eject your SD card -18. Press (Start) to reboot with the SD card removed +4. Select "\" +5. Select the "Install all CIAs" option, then press (A) to confirm +6. Return to the SD directory with (B) +7. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option +8. Return to the FBI main menu with (B) +9. Select "CTR NAND" +10. Select "\" +11. Select the "Paste" option, then press (A) to confirm +12. Exit with the home button +13. Launch the Homebrew Launcher from the home menu +14. Select "DSP Dump" +15. Press (Start) when prompted to exit +16. Press (Start) to open the Homebrew Launcher exit menu +17. Press (A) while holding (Start) to reboot into Hourglass9 +18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject" +19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject +20. Press (Select) on the main menu to eject your SD card +21. Press (Start) to reboot with the SD card removed + Booting the device at least once with the SD card removed will allow you to configure the CTRNAND based Luma3DS installation 19. Use the (A) button and the D-Pad to turn on the following: + **"Show NAND or user string in System Settings"** -20. If you are using a **New 3DS**, you can *also* enable the following: +23. If you are using a **New 3DS**, you can *also* enable the following: + **"New 3DS CPU" to "Clock+L2(x)"** + This will increase the framerate of many games, but may cause instability in others + If some games do not work properly, disable this option and try again -21. Reinsert your SD card, then press (Start) to save and reboot! + + This breaks the Homebrew Launcher on 11.3! +24. Reinsert your SD card, then press (Start) to save and reboot! ___ diff --git a/_pages/vi_VN/Move-EmuNAND.txt b/_pages/vi_VN/Move-EmuNAND.txt index 89e2c1cfb..3524b0a61 100644 --- a/_pages/vi_VN/Move-EmuNAND.txt +++ b/_pages/vi_VN/Move-EmuNAND.txt @@ -48,4 +48,6 @@ You will LOSE your GBA VC and DSiWare saves! 24. Press (Start) to reboot! 25. If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_down) +___ + Return to [Installing arm9loaderhax](installing-arm9loaderhax). \ No newline at end of file diff --git a/_pages/vi_VN/Region-Changing.txt b/_pages/vi_VN/Region-Changing.txt index 91e144c62..dfdabcd3b 100644 --- a/_pages/vi_VN/Region-Changing.txt +++ b/_pages/vi_VN/Region-Changing.txt @@ -122,6 +122,8 @@ Region changing using ctrtransfer (which this method uses) seems to cause reboot 1. Press (Start) then hold (X) to reboot into arm9loaderhax Decrypt9 2. Go to "SysNAND Options", then "System Save Inject", then select "Inject configsave.bin" +___ + Old 3DSs / 2DSs may need to format (using TinyFormat or the System Settings) to play extended memory mode games (such as Monster Hunter, Super Smash Bros, or Pokemon Sun/Moon). {: .notice--info} diff --git a/_pages/zh_CN/9.2.0-ctrtransfer.txt b/_pages/zh_CN/9.2.0-ctrtransfer.txt index 75443b594..c3f32ca62 100644 --- a/_pages/zh_CN/9.2.0-ctrtransfer.txt +++ b/_pages/zh_CN/9.2.0-ctrtransfer.txt @@ -15,8 +15,8 @@ permalink: /zh_CN/9.2.0-ctrtransfer.html #### 你需要 -* 最新版本的 [GodMode9] (https://github.com/d0k3/GodMode9/releases/) -* 最新版本的 [Decrypt9WIP] (https://github.com/d0k3/Decrypt9WIP/releases/latest) +* 最新版本的[GodMode9](https://github.com/d0k3/GodMode9/releases/) +* 最新版本的[Decrypt9WIP](https://github.com/d0k3/Decrypt9WIP/releases/latest) * 对应你设备和区域的9.2.0 ctrtransfer镜像（下载链接均是磁力链格式） *(如果你的设备不在下面的区域中，随便选一个符合你的设备类型的): + - [新3DS 9.2.0 - 欧版 - ctrtransfer](magnet:?xt=urn:btih:fed7bfeec0e52b42a77467cfb6ffd3e9dd2d5a70&dn=9.2.0-20E%5Fctrtransfer%5Fn3ds.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce) @@ -93,6 +93,8 @@ permalink: /zh_CN/9.2.0-ctrtransfer.html 8. 按 (B) 来拒绝从CDN安装ticket。 9. 按home键退出 +___ + 在进行ctr转移后，没有恢复config save就格式化设备，会造成屏幕亮度/闪烁等问题。 参见[这里] (https://github.com/Plailect/Guide/issues/794)。 {: .notice--info} diff --git a/_pages/zh_CN/Decrypt9-(Browser).txt b/_pages/zh_CN/Decrypt9-(Browser).txt index 984d69bf9..334b3102a 100644 --- a/_pages/zh_CN/Decrypt9-(Browser).txt +++ b/_pages/zh_CN/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ permalink: /zh_CN/decrypt9-(browser).html + 如果出现错误，参见[问题排查](troubleshooting#ts_browser) 5. 如果漏洞利用成功，Decrypt9将会启动 +___ + 继续进行[2.1.0 ctr迁移](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt b/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt index 6f4f174e0..7d5f8999d 100644 --- a/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/zh_CN/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /zh_CN/decrypt9-(homebrew-launcher).html + 死机的话，就长按电源键关机然后再试一次 10. 如果漏洞利用成功，将会自动进入Decrypt9 +___ + 继续下一步 [2.1.0 ctrtransfer](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_CN/Decrypt9-(MSET).txt b/_pages/zh_CN/Decrypt9-(MSET).txt index 8ef52e8fa..55dee0bb6 100644 --- a/_pages/zh_CN/Decrypt9-(MSET).txt +++ b/_pages/zh_CN/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ permalink: /zh_CN/decrypt9-(mset).html 8. 重启，然后进入系统设置（System Settings），然后“其它选项”（”Other Settings”），然后”Profile”，最后”Nintendo DS Profile”（译者注：没错，就是传说中的414） 9. 如果漏洞利用成功，Decrypt9将会启动 +___ + 继续进行[2.1.0 ctr转移](2.1.0-ctrtransfer) {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_CN/F3-(Linux).txt b/_pages/zh_CN/F3-(Linux).txt index d92339244..285c759d5 100644 --- a/_pages/zh_CN/F3-(Linux).txt +++ b/_pages/zh_CN/F3-(Linux).txt @@ -51,6 +51,7 @@ permalink: /zh_CN/f3-(linux).html Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ 如果测试结果显示 `Data LOST: 0.00 Byte (0 sectors)` 你的 SD 卡是好的，你可以删除 SD 卡上的所有 '.h2w' 文件。 {: .notice--success} diff --git a/_pages/zh_CN/F3X-(Mac).txt b/_pages/zh_CN/F3X-(Mac).txt index f3ed137ee..da8b47f1d 100644 --- a/_pages/zh_CN/F3X-(Mac).txt +++ b/_pages/zh_CN/F3X-(Mac).txt @@ -26,6 +26,8 @@ permalink: /zh_CN/f3x-(mac).html 5. 点击”Start Test”（开始测试） 6. 等待测试完成 +___ + 如果测试结果显示`Success! Your card is ok!`（成功！你的SD卡没问题！），你的SD卡是好的，删除你SD卡上所有的`.h2w`文件 {: .notice--success} diff --git a/_pages/zh_CN/H2testw-(Windows).txt b/_pages/zh_CN/H2testw-(Windows).txt index 0696378a1..d4517e931 100644 --- a/_pages/zh_CN/H2testw-(Windows).txt +++ b/_pages/zh_CN/H2testw-(Windows).txt @@ -29,6 +29,8 @@ permalink: /zh_CN/h2testw-(windows).html 8. 点击”Write + Verify” 9. 等待测试完成 +___ + 如果测试结果显示`Test finished without errors`（测试完成，没有错误），你的SD卡是好的，删除你SD卡上所有的`.h2w`文件 {: .notice--success} diff --git a/_pages/zh_CN/Home.txt b/_pages/zh_CN/Home.txt index b38f65b3f..f86a57a8f 100644 --- a/_pages/zh_CN/Home.txt +++ b/_pages/zh_CN/Home.txt @@ -75,5 +75,5 @@ Arm9loaderhax是一种最新和最好的引导自制系统的方法，只需启 + 如果一切顺利，在安装完自制系统后你不会丢失任何数据（包括游戏、NNID、存档等）。 + **确保你的设备在操作过程中接上电源线充电，防止因意外关机而造成数据丢失或机器损坏！** + 你的SD卡的分区表格式必须是[MBR，而不是GPT](http://www.howtogeek.com/245610/)（机器自带的SD卡的分区表格式默认是MBR）。 -+ 如果你需要格式化一张新的SD卡，可以使用[`guiformat`](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)，并将Allocation Unit Size设置为32K。 ++ 如果你需要格式化一张新的SD卡，可以使用[`guiformat`](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)，并将Allocation Unit Size（分配单元大小）设置为32K。 + 2DS所需的软件和老3DS一样，因而任何适用于老3DS的步骤也同样适用于2DS。 diff --git a/_pages/zh_CN/Homebrew-Launcher-(Soundhax).txt b/_pages/zh_CN/Homebrew-Launcher-(Soundhax).txt index d9780e232..9ad535ce8 100644 --- a/_pages/zh_CN/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/zh_CN/Homebrew-Launcher-(Soundhax).txt @@ -32,5 +32,7 @@ Request Context + 如果直接启动 SoundHax，会让这些提示每次都跳出来，除非你先跳过提示，然后再正常重新启动播放程式 8. 现在应该自动进入Homebrew Launcher +___ + 继续下一步 [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_CN/Installing-arm9loaderhax.txt b/_pages/zh_CN/Installing-arm9loaderhax.txt index a2bba2b39..d81f1da3f 100644 --- a/_pages/zh_CN/Installing-arm9loaderhax.txt +++ b/_pages/zh_CN/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ permalink: /zh_CN/installing-arm9loaderhax.html + **“New 3DS CPU”选项，请移动光标到”Clock+L2(x)”** + 这将提升许多游戏的帧率，但可能会造成某些游戏的不稳定 + 如果有部分游戏不能正常运行，关闭这个选项并重试 + + 这样将会破坏11.3上的Homebrew Launcher！ 4. 按下(Start)键保存设置并重启 + 如果出现黑屏，请照常进行接下来的教程 + 如果出现”Failed to mount CTRNAND”错误，请照常进行接下来的教程 @@ -151,31 +152,33 @@ permalink: /zh_CN/installing-arm9loaderhax.html 1. 打开“Health and Safety”应用（健康与安全，现在应该是FBI） 2. 选择“SD” 3. 选择“cias” -4. 选择 `FBI.cia` 文件，按(A)键安装 -5. 选择 `hblauncher_loader.cia` 文件，按(A)键安装 - + 请注意在11.3.0自制程序启动器不工作 - + 此问题应该很快会得到修复 -6. 选择 `lumaupdater.cia` 文件，按(A)键安装 -7. 按(B)键返回SD卡目录 -8. 选择 `arm9loaderhax.bin` 文件，按(A)键并选择“复制”选项 -9. 按(B)键返回FBI主菜单 -10. 选择”CTR NAND” -11. 选择”\” -12. 选择”Paste”选项，并按(A)键确认 -13. 按home键退出 -14. 按住(Start)键开机，通过arm9loaderhax进入Hourglass9 -15. 选择”SysNAND Backup/Restore”，然后选择”Health&Safety Inject” -16. 选择 `hs.app` (原来那个并不包含FBI的版本)，然后按(A)键确认注入 -17. 在主菜单中，按(Select)键弹出你的SD卡 -18. 按(Start)键，在没有SD卡的情况下重启 +4. 选择”\” +5. 选择”Install all CIAs”选项，并按(A)键确认 +6. 按(B)键返回SD卡目录 +7. 选择 `arm9loaderhax.bin` 文件，按(A)键并选择“复制”选项 +8. 按(B)键返回FBI主菜单 +9. 选择”CTR NAND” +10. 选择”\” +11. 选择”Paste”选项，并按(A)键确认 +12. 按home键退出 +13. 从桌面菜单中运行Homebrew Launcher（自制程序启动器） +14. 选择”DSP Dump” +15. 按照提示，按(Start)键退出 +16. 按(Start)键打开自制程序启动器的退出菜单 +17. 按(Start)的同时按(A)来重启至Hourglass9 +18. 选择”SysNAND Backup/Restore”，然后选择”Health&Safety Inject” +19. 选择 `hs.app` (原来那个并不包含FBI的版本)，然后按(A)键确认注入 +20. 在主菜单中，按(Select)键弹出你的SD卡 +21. 按(Start)键，在没有SD卡的情况下重启 + 在没有SD卡的情况下至少开启一次你的机器，可以使你配置基于CTRNAND的luma -19. 使用方向键和A键来启用以下设置： +22. 使用方向键和A键来启用以下设置： + **"Show NAND or user string in System Settings"** -20. 如果你的设备是**新3DS**，你还应该启用如下设置： +23. 如果你的设备是**新3DS**，你还应该启用如下设置： + **“New 3DS CPU”选项，请移动光标到”Clock+L2(x)”** + 这将提升许多游戏的帧率，但可能会造成某些游戏的不稳定 + 如果有部分游戏不能正常运行，关闭这个选项并重试 -21. 将SD卡插回3DS，按下(Start)键保存设置并重启！ + + 这样将会破坏11.3上的Homebrew Launcher！ +24. 将SD卡插回3DS，按下(Start)键保存设置并重启！ ___ diff --git a/_pages/zh_CN/Move-EmuNAND.txt b/_pages/zh_CN/Move-EmuNAND.txt index f1b1b24b4..b0f9c5647 100644 --- a/_pages/zh_CN/Move-EmuNAND.txt +++ b/_pages/zh_CN/Move-EmuNAND.txt @@ -48,4 +48,6 @@ permalink: /zh_CN/move-emunand.html 23. 按(Start)键重启 24. 如果出现黑屏，参见这个[问题排查](troubleshooting#ts_sys_down) +___ + 返回到[安装arm9loaderhax](installing-arm9loaderhax)继续操作。 \ No newline at end of file diff --git a/_pages/zh_CN/Region-Changing.txt b/_pages/zh_CN/Region-Changing.txt index 0ab1f3b89..4fc9d2374 100644 --- a/_pages/zh_CN/Region-Changing.txt +++ b/_pages/zh_CN/Region-Changing.txt @@ -122,6 +122,8 @@ permalink: /zh_CN/region-changing.html 1. 按住(X)键开机，进入Decrypt9 2. 进入”SysNAND Options”，选择”System Save Inject”，然后选”Inject configsave.bin” +___ + 老3DS/2DS可能需要格式化机器（使用TinyFormat或系统设置）才能玩扩展内存模式的游戏（如怪物猎人，任天堂明星大乱斗，和精灵宝可梦日/月）。 {: .notice--info} diff --git a/_pages/zh_TW/9.2.0-ctrtransfer.txt b/_pages/zh_TW/9.2.0-ctrtransfer.txt index 8d8f03b62..1a0bb984b 100644 --- a/_pages/zh_TW/9.2.0-ctrtransfer.txt +++ b/_pages/zh_TW/9.2.0-ctrtransfer.txt @@ -93,6 +93,8 @@ permalink: /zh_TW/9.2.0-ctrtransfer.html 8. 按 「B」以取消 CDN tickets 的安裝 9. 按「首頁鍵 (Home)」退出 +___ + 在 ctrtransfer 之後，在*未還原系統設置檔*的情況下格式化裝置，可能會造成螢幕閃爍或亮度問題。 請見[此](https://github.com/Plailect/Guide/issues/794)。 {: .notice--info} diff --git a/_pages/zh_TW/Decrypt9-(Browser).txt b/_pages/zh_TW/Decrypt9-(Browser).txt index 60f014242..cc6e0bc39 100644 --- a/_pages/zh_TW/Decrypt9-(Browser).txt +++ b/_pages/zh_TW/Decrypt9-(Browser).txt @@ -28,5 +28,7 @@ permalink: /zh_TW/decrypt9-(browser).html + 如果途中遇到問題的話， [請參見疑難排解](troubleshooting#ts_browser) 5. 如果一切成功的話，你將直接跳至 Decrypt9 +___ + 繼續至 [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt b/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt index 5aa937fde..64507b343 100644 --- a/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt +++ b/_pages/zh_TW/Decrypt9-(Homebrew-Launcher).txt @@ -28,5 +28,7 @@ permalink: /zh_TW/decrypt9-(homebrew-launcher).html + 如果當機的話，按住電源紐強制重啟你的裝置在試一次即可 10. 如果一切成功的話，你將自動進入 Decrypt9 +___ + 繼續至 [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_TW/Decrypt9-(MSET).txt b/_pages/zh_TW/Decrypt9-(MSET).txt index 3e05ba013..5d6b44e21 100644 --- a/_pages/zh_TW/Decrypt9-(MSET).txt +++ b/_pages/zh_TW/Decrypt9-(MSET).txt @@ -29,5 +29,7 @@ permalink: /zh_TW/decrypt9-(mset).html 8. 重新啟動系統，接著到「系統設置（System Settings）」、「其他設置（Other Settings）」、「設定檔（Profile）」中選擇「任天堂 DS 設定檔（Nintendo DS Profile）」 9. 如果一切成功的話，你將直接跳至 Decrypt9 +___ + 繼續至 [2.1.0 ctrtransfer](2.1.0-ctrtransfer). {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_TW/F3-(Linux).txt b/_pages/zh_TW/F3-(Linux).txt index 00a4a716f..cb9acfdf4 100644 --- a/_pages/zh_TW/F3-(Linux).txt +++ b/_pages/zh_TW/F3-(Linux).txt @@ -51,6 +51,7 @@ permalink: /zh_TW/f3-(linux).html Overwritten: 0.00 Byte (0 sectors) Average Reading speed: 9.42 MB/s +___ 如果結果顯示`Data LOST: 0.00 Byte (0 sectors)`，則表示您的 SD 卡是沒問題的，接著就可以刪除卡上所有的`.h2w`檔案了 {: .notice--success} diff --git a/_pages/zh_TW/F3X-(Mac).txt b/_pages/zh_TW/F3X-(Mac).txt index bd00bdfed..d05c0b79b 100644 --- a/_pages/zh_TW/F3X-(Mac).txt +++ b/_pages/zh_TW/F3X-(Mac).txt @@ -26,6 +26,8 @@ permalink: /zh_TW/f3x-(mac).html 5. 按下「開始測試（Start Test）」 6. 等到檢查完畢為止。 +___ + 如果測試顯示的結果「成功 ！ 您的卡一切正常！（Success! Your card is ok!）」表示你的 SD 卡是正常的，然後你可以刪除上面所有的 `.h2w` 檔案 {: .notice--success} diff --git a/_pages/zh_TW/H2testw-(Windows).txt b/_pages/zh_TW/H2testw-(Windows).txt index 859f7d5ac..b89b3485a 100644 --- a/_pages/zh_TW/H2testw-(Windows).txt +++ b/_pages/zh_TW/H2testw-(Windows).txt @@ -29,6 +29,8 @@ permalink: /zh_TW/h2testw-(windows).html 8. 點下「Write + Verify」 9. 等到檢查完畢為止。 +___ + 如果結果顯示`Test finished without errors`，則表示您的 SD 卡是沒問題的，接著就可以刪除卡上所有的`.h2w`檔案了 {: .notice--success} diff --git a/_pages/zh_TW/Homebrew-Launcher-(Soundhax).txt b/_pages/zh_TW/Homebrew-Launcher-(Soundhax).txt index 4ddf826e7..1f48cace1 100644 --- a/_pages/zh_TW/Homebrew-Launcher-(Soundhax).txt +++ b/_pages/zh_TW/Homebrew-Launcher-(Soundhax).txt @@ -30,5 +30,7 @@ SoundHax 相容於 9.0.0 至 11.2.0 的歐、日、韓及美區的系統版本 + 如果當機的話，按住電源紐強制重啟你的裝置在試一次即可 8. 你的主機應該就會啟動 Homebrew Launcher 了 +___ + 繼續至 [Decrypt9 (Homebrew Launcher)](decrypt9-(homebrew-launcher)) {: .notice--primary} \ No newline at end of file diff --git a/_pages/zh_TW/Installing-arm9loaderhax.txt b/_pages/zh_TW/Installing-arm9loaderhax.txt index bd140c8a9..cd5a38975 100644 --- a/_pages/zh_TW/Installing-arm9loaderhax.txt +++ b/_pages/zh_TW/Installing-arm9loaderhax.txt @@ -110,6 +110,7 @@ permalink: /zh_TW/installing-arm9loaderhax.html + **「New 3DS CPU」中選擇「Clock+L2(x)」** + 某些情況下，這將提高遊戲的流暢度，但也有些遊戲會有不穩的情況 + 如果有些遊戲無法正常運作的話，請關閉此選項再試一次 + +若在版本 11.3 上啟用此選項將無法運行 Homebrew Launcher 4. 按下「開始鍵 (Start)」以存檔並重新啟動系統 + 如果黑屏，直接到下一節即可 + 如果你遇到「Failed to mount CTRNAND」錯誤的話，直接跳到下一節即可 @@ -151,31 +152,33 @@ permalink: /zh_TW/installing-arm9loaderhax.html 1. 啟動「健康與安全」程式（改為 FBI 管理器後） 2. 選擇「SD」 3. 選擇「cias」資料夾 -4. 選擇 `FBI.cia` 並按下「A」安裝 -5. 選擇 `hblauncher_loader.cia` 並按下「A」安裝 - + 目前版本 11.3.0 將無法使用 Homebrew Launcher - + 更新應該很快就出來了 -6. 選擇 `lumaupdater.cia` 並按下「A」安裝 -7. 按下「B」以回到 SD 卡根目錄 -8. 選擇 `arm9loaderhax.bin`，按下「A」，並選擇「Copy」 -9. 按下「B」以回到 FBI 管理器主選單 -10. 選擇「CTR NAND」 -11. 選擇「\」 -12. 選擇「Paste」，按下「A」確認 -13. 按「首頁鍵 (Home)」退出 -14. 按住「開始鍵 (Start)」重開進入 Hourglass9 -15. 選擇「SysNAND Backup/Restore」中的「Health&Safety Inject」 -16. 選擇你第一次備份出來原本的 `hs.app`，按下「A」確認安裝 -17. 於主選單按下「選擇鍵 (Select)」以卸除 SD 卡 -18. 在 SD 拔出後，按下「開始鍵 (Start)」重啟 +4. 選擇「\」 +5. 選擇「Install all CIAs」，並按下「A」確認 +6. 按下「B」以回到 SD 卡根目錄 +7. 選擇 `arm9loaderhax.bin`，按下「A」，並選擇「Copy」 +8. 按下「B」以回到 FBI 管理器主選單 +9. 選擇「CTR NAND」 +10. 選擇「\」 +11. 選擇「Paste」，按下「A」確認 +12. 按「首頁鍵 (Home)」退出 +13. 從 HOME 選單中啟動 Homebrew Launcher +14. 啟動「DSP Dump」 +15. 提示時，按下「開始鍵 (Start)」退出 +16. 按下「開始鍵 (Start)」開啟 Homebrew Launcher 離開選單 +17. 按住「開始鍵 (Start)」後，按「A」以重新啟動至 Hourglass9 +18. 選擇「SysNAND Backup/Restore」中的「Health&Safety Inject」 +19. 選擇你第一次備份出來原本的 `hs.app`，按下「A」確認安裝 +20. 於主選單按下「選擇鍵 (Select)」以卸除 SD 卡 +21. 在 SD 拔出後，按下「開始鍵 (Start)」重啟 + 在 SD 卡拔除的情況下開機將讓你可以在 CTRNAND 上設置 Luma3DS -19. 透過方向鍵及「A」以開啟下列選項： +22. 透過方向鍵及「A」以開啟下列選項： + **「Show NAND or user string in System Settings」** -20. 如果你的裝置是 **New 3DS** 的話，你也可以同時開啟下列選項： +23. 如果你的裝置是 **New 3DS** 的話，你也可以同時開啟下列選項： + **「New 3DS CPU」中選擇「Clock+L2(x)」** + 某些情況下，這將提高遊戲的流暢度，但也有些遊戲會有不穩的情況 + 如果有些遊戲無法正常運作的話，請關閉此選項再試一次 -21. 重新插入你的 SD 卡，按下「開始鍵 (Start)」存檔並重啟！ + +若在版本 11.3 上啟用此選項將無法運行 Homebrew Launcher +24. 重新插入你的 SD 卡，按下「開始鍵 (Start)」存檔並重啟！ ___ diff --git a/_pages/zh_TW/Move-EmuNAND.txt b/_pages/zh_TW/Move-EmuNAND.txt index 849325524..4ff6a4d44 100644 --- a/_pages/zh_TW/Move-EmuNAND.txt +++ b/_pages/zh_TW/Move-EmuNAND.txt @@ -48,4 +48,6 @@ permalink: /zh_TW/move-emunand.html 23. 按下「開始鍵 (Start)」以重新啟動系統 24. + 如果黑屏，[請參見此故障排除](troubleshooting#ts_sys_down) +___ + 回到 [安裝 arm9loaderhax](installing-arm9loaderhax) \ No newline at end of file diff --git a/_pages/zh_TW/Region-Changing.txt b/_pages/zh_TW/Region-Changing.txt index 6c570520e..ef8f7ab6a 100644 --- a/_pages/zh_TW/Region-Changing.txt +++ b/_pages/zh_TW/Region-Changing.txt @@ -122,6 +122,8 @@ permalink: /zh_TW/region-changing.html 1. 按下「開始鍵 (Start)」然後按住「X」以啟動至 arm9loaderhax Decrypt9 2. 選擇「SysNAND Options」、「System Save Inject」、「Inject configsave.bin」 +___ + 原 3DS 及 2DS 主機可能需要先格式化（透過 TinyFormat 或 系統設定內）才能玩需要用到「額外記憶體模式」的遊戲（像是魔物獵人，任天堂明星大亂鬥、或神奇寶貝太陽/月亮版...等） {: .notice--info}