New Crowdin translations (#1238)

_pages/af_ZA/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/af_ZA/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/af_ZA/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/af_ZA/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/af_ZA/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/ar_SA/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/ar_SA/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/ar_SA/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ar_SA/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ar_SA/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/ca_ES/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/ca_ES/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/ca_ES/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ca_ES/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ca_ES/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/cs_CZ/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/cs_CZ/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/cs_CZ/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/cs_CZ/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/cs_CZ/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/da_DK/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/da_DK/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/da_DK/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/da_DK/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/da_DK/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/de_DE/finalizing-setup.txt

@@ -16,7 +16,7 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
 + **Themely** *(installiert benutzerdefinierte Themes)*
 + **Luma3DS Updater** *(aktualisiert deine CFW Installation)*
 + **GodMode9** *(Multifunktionstool, welches NAND- und Cartridge-Funktionen ausführen kann)*
-+ **Homebrew Launcher Loader** *(startet den Homebrew Launcher als normale Anwendung dank Rosalina's magie)*
++ **Homebrew Launcher Loader** *(startet den Homebrew Launcher als normale Anwendung dank Rosalinas Magie)*
 
 {% endcapture %}
 
@@ -55,15 +55,6 @@ Während dieses Prozesses richtest du auch folgende Programme ein:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. Falls dein Gerät auf einer Version unter 9.0.0 ist, wird es nicht starten, außer du benutzt eine andere Version von Luma3DS:
-  + Lade [eine alte Version von Luma3DS]({{ base_path }}/luma_legacy/cf0b05e/boot.firm) herunter
-  + Kopiere `boot.firm` in das Stammverzeichnis deiner SD-Karte *(überschreibe bestehende Dateien)*
-  + Ersetze diese `boot.firm` mit der aus [der neuesten Version von Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest), nachdem dein Gerät in späteren Schritten geupdatet wurde
-1. Wenn dein Gerät eine Version zwischen 3.0.0 und (inklusive) 4.5.0 besitzt, wird dein Gerät nicht starten bis du die die nötige Firmware herunterlädst:
-  + Lade [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) herunter und ändere ihren Namen zu `native.firm`
-  + Lade dir [diese Datei](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk) herunter
-  + Kopiere `native.firm` und `cetk` in den `/luma/` Ordner auf deiner SD-Karte
-  + Lösche beide dieser Dateien nachdem du dein Gerät später wie beschrieben geupdatet hast
 1. Stecke deine SD-Karte nun wieder in deinen 3DS
 1. Schalte deine Konsole an
 
@@ -79,8 +70,6 @@ Wenn du vor dieser Anleitung bereits einen EmuNAND hattest und dessen Inhalte in
   + Updates mit B9S + Luma (welches du hast) sind sicher
   + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
   + Sollte immer noch ein Fehler auftreten und dein NAND unter 9.2.0 sein, [befolge diese Schritte](9.2.0-ctrtransfer), versuche es dann erneut
-1. Wenn dein Gerät vor dem Update auf einer niedrigeren Version als 9.0.0 war, ersetze `boot.firm` im Stammverzeichnis deiner SD-Karte, durch die in der [neuesten Version von Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Falls dein Gerät vor dem Updaten auf einer Version zwischen 3.0.0 und 4.5.0 war, lösche `native.firm` und `cetk` aus dem `/luma/` Ordner deiner SD-Karte
 
 ##### Abschnitt III - Starten von FBI
 

_pages/de_DE/get-started-(new-3ds).txt

@@ -5,7 +5,7 @@ title: "Los geht's (New 3DS)"
 Wähle die passende Methode für deine Version aus der unteren Tabelle.
 {: .notice--primary}
 
-Beachte, dass die "from" und "to"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
+Beachte, dass die "Von" und "Bis"-Felder inklusive sind. Das heißt, dass die Zeile "von 9.0.0 bis 9.2.0" die Versionen 9.0.0, 9.1.0 und 9.2.0 beinhaltet.
 {: .notice--info}
 
 Beachten Sie, dass die letzte Zahl Ihrer System-Version (die durch einen Bindestrich vorangestellt ist) sich auf die Version Ihres Browsers bezieht. Derzeit ist die Browserversion irrelevant für den neuen 3DS in diesem Guide.
@@ -28,8 +28,8 @@ Die Version deines 3DS findest du rechts unten auf dem oberen Bildschirm in den
   </colgroup>
   <thead>
     <tr>
-      <th style="text-align: center; font-weight: bold;"> aus</th>
+      <th style="text-align: center; font-weight: bold;"> Von</th>
-      <th style="text-align: center; font-weight: bold;"> aus</th>
+      <th style="text-align: center; font-weight: bold;"> Bis</th>
       <th style="text-align: center; font-weight: bold;"></th>
     </tr>
   </thead>

_pages/de_DE/get-started.txt

@@ -20,7 +20,7 @@ Wenn du deinen 3DS bereits gehackt hast und eine CFW mit EmuNAND hast, folge ein
 Beachte bitte, dass Screenshots im Guide vergrößert werden können, um mehr Kontext zu zeigen, indem du auf sie klickst.
 {: .notice--info}
 
-Bevor Sie beginnen, sollten die Windows-Nutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))!
+Bevor du beginnst, solltest du als Windows-Benutzer die Option zum Anzeigen der Datei-Erweiterungen aktivieren mit [Datei-Erweiterungen (Windows)](file-extensions-(windows))!
 {: .notice--info}
 
 Bevor du anfängst, solltest du deine SD-Karte auf Fehler überprüfen. Verwende dazu [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), oder [F3X (macOS)](f3x-(mac))!

_pages/de_DE/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Anleitung" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Los geht's" #
   cta_url: "/de_DE/get-started"

_pages/de_DE/homebrew-launcher-(soundhax).txt

@@ -15,7 +15,7 @@ Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist,
 
 Beachten Sie, dass Karten-Updates nur Updates für Kernfunktionen wie die Systemeinstellungen, das Home Menü, etc. liefern. Karten-Updates aktualisieren nicht Nintendo 3DS Sound und Netzwerkfunktionen, wie den Internetbrowser, den eShop, die StreetPass Mii Plaza oder der System-Transfer.
 <br><br>
-Dies bedeutet, dass das Verwenden von Karten-Updates einer Version eines älteren Nintendo 3DS Sound *(<7.0.0 for Old 3DSs in the EUR, JPN, KOR, and USA regions) *, das eine neuere Version des Nintendo 3DS Sound [Soundhax](homebrew-launcher-(soundhax))! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
+Das bedeutet, dass ein Karten-Update von einer Systemversion, die eine ältere Version von Nintendo 3DS Sound enthält *(<7.0.0 auf Old 3DS Systemen in den Regionen EUR, JPN, KOR und USA)*, auf eine Systemversion mit neuerer Version von Nintendo 3DS Sound, [Soundhax](homebrew-launcher-(soundhax)) unbrauchbar machen wird! Du benötigst eine [alternative Methode](homebrew-launcher-(alternatives)), um dir Zugang zum Homebrew Launcher zu schaffen!
 {% endcapture %}
 
 <div class="notice--warning">{{ notice-1 | markdownify }}</div>

_pages/de_DE/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
   + Falls dein Spiel einen Fehler über beschädigte oder nicht aufrufbare Speicherdaten anzeigt, stelle sicher, dass du **die Inhalte** des Ordners `savedata`, und nicht den Ordner `savedata` selbst kopiert hast
   + Falls dein Spiel sich normal verhält und dir keine Fehlermeldung über `boot.nds` anzeigt, dann solltest du aufhören und herausfinden, was schief gelaufen ist
   + Wenn du einen schwarzen Bildschirm bekommst, [folge diesen Problembehandlungen](troubleshooting#twl_broken)
-  + Falls das Spiel auf dem **Ziel 3DS** fehlt oder einen Fehler über beschädigte oder nicht aufrufbare Speicherstände anzeigt, [folge dieser Anleitung zur Problembehandlung](troubleshooting#ts_dsiware)
 
 ##### Abschnitt III - Systemtransfer
 
@@ -121,8 +120,8 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
     + Du kannst auch einfach [die NNID vom **Quell-3DS** entfernen](https://3ds.guide/troubleshooting#rm_nnid), falls du es bevorzugst, dass diese auf **dem Ziel-3DS** bleibt
 1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
 1. Starte GodMode9 indem du (A) drückst
-1. Navigiere zu `[0:] SDCARD`
+1. Navigiere zu `[0:] SDCARD` ->` gm9out`
-1. Drücke (A) auf deiner NAND `.bin`, um es auszuwählen, wähle dann" NAND image options... " und wähle dann "Restore SysNAND (safe) "
+1. Drücke (A) auf `nand.bin`, um es auszuwählen, wähle dann "NAND image options...", dann wähle "Restore SysNAND (safe)"
 1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
   + Die Installation von boot9strap wird dadurch nicht überschrieben
 1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
@@ -139,12 +138,11 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
 1. Kopiere die 11.4.0 `.firm` entsprechend des **Ziel-3DS** in das `boot9strap`-Verzeichnis im Stammverzeichnis der SD-Karte des **Ziel-3DS**
 1. Kopiere `boot9strap.firm` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
 1. Starte b9sTool indem du das DSiWare-Spiel auf deinem **Ziel-3DS** startest
-  + Wenn das Spiel b9sTool nicht startet, [folge diesem Guide](troubleshooting#ts_dsiware) zur Fehlerbehebung
+  + Falls das Spiel fehlt oder b9sTool nicht startet, befolge [diese Fehlerbehandlung](troubleshooting#ts_dsiware)
 1. Wähle "Dump f0f1" um ein Backup der FIRM **des Ziel-3DS** zu erstellen
-1. Merke dir wo sich das FIRM Backup befindet
 1. Beende b9sTool
   + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
-1. Stecke die SD-Karte wieder in deinen Computer und kopiere dort `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` ( je nachdem, welches Gerät du hast) zu einem sicheren Ort; mache mehrere Kopien in mehreren Ordnern; dieses Backup wird dich von einem Brick schützen, falls etwas schiefgehen sollte
+1. Stecke deine SD-Karte in deinen Computer und kopiere `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` (abhängig von deinem Gerät) aus dem `boot9strap` Ordner an einen sicheren Ort; erstelle Sicherheitskopieren an mehreren Orten; diese Sicherheitskopie wird dich vor einem Brick bewahren, sollte etwas schiefgehen
 1. Lege die SD-Karte in den **Ziel-3DS** ein
 
 ##### Abschnitt VI - Überschreiben der FIRM des Zielsystems

_pages/de_DE/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
     + Du kannst auch einfach [die NNID vom **Quell-3DS** entfernen](https://3ds.guide/troubleshooting#rm_nnid), falls du es bevorzugst, dass diese auf **dem Ziel-3DS** bleibt
 1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
 1. Starte GodMode9 indem du (A) drückst
-1. Navigiere zu `[0:] SDCARD`
+1. Navigiere zu `[0:] SDCARD` ->` gm9out`
-1. Drücke (A) auf deiner NAND `.bin`, um es auszuwählen, wähle dann" NAND image options... " und wähle dann "Restore SysNAND (safe) "
+1. Drücke (A) auf `nand.bin`, um es auszuwählen, wähle dann "NAND image options...", dann wähle "Restore SysNAND (safe)"
 1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
   + Die Installation von boot9strap wird dadurch nicht überschrieben
 1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
@@ -152,10 +152,9 @@ Benutze einen [save manager](https://github.com/J-D-K/JKSM/releases/latest) um a
   + **The Legend of Zelda: Four Swords**: Das Spiel starten
   + Wenn dein Spiel nicht die gehackte Speicherdatei installiert hat, [folge diesem Fehlerbehebungsguide](troubleshooting#ts_dsiware)
 1. Wähle "Dump f0f1" um ein Backup der FIRM **des Ziel-3DS** zu erstellen
-1. Merke dir wo sich das FIRM Backup befindet
 1. Beende b9sTool
   + Unter Umständen musst du das Ausschalten der Konsole erzwingen indem du den Power-Knopf gedrückt hälst
-1. Stecke die SD-Karte wieder in deinen Computer und kopiere dort `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` ( je nachdem, welches Gerät du hast) zu einem sicheren Ort; mache mehrere Kopien in mehreren Ordnern; dieses Backup wird dich von einem Brick schützen, falls etwas schiefgehen sollte
+1. Stecke deine SD-Karte in deinen Computer und kopiere `F0F1_N3DS.bin` oder `F0F1_O3DS.bin` (abhängig von deinem Gerät) aus dem `boot9strap` Ordner an einen sicheren Ort; erstelle Sicherheitskopieren an mehreren Orten; diese Sicherheitskopie wird dich vor einem Brick bewahren, sollte etwas schiefgehen
 1. Lege die SD-Karte in den **Ziel-3DS** ein
 
 ##### Abschnitt VI - Überschreiben der FIRM des Zielsystems

_pages/de_DE/troubleshooting.txt

@@ -122,6 +122,26 @@ Browserbasierte Exploits (wie browserhax oder 2xrsa) sind oft instabil und stür
     1. Solltest du in den abgesicherten Modus kommen, aktualisiere dein Gerät
 1. Deine Konsole könnte gebrickt sein. Für Hilfe auf Englisch, frage auf dem [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />Nach dem DSiWare Transfer funktioniert die gehackte DSiWare nicht
+
+1. Starte den **Quell-3DS** neu, während du beim Booten (Start) gedrückt hälst, um den Luma3DS Chainloader anzuzeigen
+1. Starte GodMode9 indem du (A) drückst
+1. Navigiere zu `[0:] SDCARD` ->` gm9out`
+1. Drücke (A) auf `nand.bin`, um die Datei auszuwählen, dann "NAND image options...", dann "Restore SysNAND (safe)"
+1. Drücke (A), um SysNAND-Änderungen zu aktivieren. Gib danach die angezeigte Tastenkombination ein
+  + Die Installation von boot9strap wird dadurch nicht überschrieben
+1. Gib die angezeigte Tastenkombination ein, um SysNAND-Änderungen (auf erster Ebene) zu aktivieren
+  + Dieser Vorgang nimmt einige Zeit in Anspruch
+1. Sobald dies abgeschlossen ist drücke (A) um fortzufahren
+1. Falls das Spiel auf dem **Ziel-3DS** fehlt, melde dich mit der NNID, die du zum Kauf des Spiels benutzt hast, auf dem **Ziel-3DS** an und lade das Spiel erneut herunter
+  + Möglicherweise musst du zuerst das Spiel über die "Datenverwaltung" in den "Systemeinstellungen" löschen
+  + Falls der **Ziel-3DS** nicht auf der aktuellsten Version ist, musst du möglicherweise ctr-httpwn nutzen, um den eShop betreten zu können
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. Gehe auf dem **Quell-3DS** in die Systemeinstellungen, "Datenverwaltung", "DSiWare" und kopiere dein DSiWare-Spiel auf deine SD-Karte
+1. Lege entweder die SD-Karte des **Quell-3DS** in den **Ziel-3DS**, oder benenne den `Nintendo 3DS` Ordner auf der SD-Karte des **Ziel-3DS** um und kopiere dann den `Nintendo 3DS` Ordner von der SD-Karte des **Quell-3DS** auf die SD-Karte des **Ziel-3DS**
+1. Gehe auf dem **Ziel-3DS** in die Systemeinstellungen, "Datenverwaltung", "DSiWare" und kopiere dein DSiWare-Spiel auf das System
+1. Stelle den ursprünglichen Zustand der SD-Karten wieder her und fahre dann mit der DSiWare-Injektion fort
+
 ## <a name="ts_sys_a9lh" />Schwarzer Bildschirm beim Start des SysNAND nachdem boot9strap installiert wurde
 
 1. Stelle sicher, dass du eine funktioniere payload hast.

_pages/el_GR/finalizing-setup.txt

@@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Κατεβάστε [αυτό το αρχείο](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/el_GR/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "Οδηγός 3DS" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Ας αρχίσουμε" #
   cta_url: "/el_GR/get-started" #

_pages/el_GR/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/el_GR/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/el_GR/troubleshooting.txt

@@ -122,6 +122,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Βεβαιωθείτε πως έχετε ένα λειτουργικό payload.

_pages/en_PT/finalizing-setup.txt

@@ -55,15 +55,6 @@ Durin' 'tis process, we also setup programs such as th' followin':
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/en_PT/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "/en_PT/get-started" #

_pages/en_PT/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/en_PT/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/en_PT/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/es_ES/finalizing-setup.txt

@@ -55,15 +55,6 @@ Durante este proceso, también instalaremos programas como los siguientes:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. Si tu consola está en una versión anterior a la 9.0.0, tu consola no iniciará a menos que utilices una versión alternativa de Luma3DS:
-  + Descarga [una versión anterior de Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copia `boot.firm` a la raíz de tu tarjeta SD *(sobreescribiendo archivos existente)*
-  + Sustituye este `boot.firm` con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) luego de actualizar tu consola más adelante en estas instrucciones
-1. Si tu consola está entre una versión entre 3.0.0 y 4.5.0 (inclusive), tu dispositivo no encenderá hasta que descargues manualmente el firmware requerido:
-  + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) y cambia su nombre a `native.firm`
-  + Descarga [este archivo](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copia `native.firm` y `cetk` a la carpeta `/luma/` en tu tarjeta SD
-  + Borra ambos archivos después de actualizar tu dispositivo más adelante en estas instrucciones
 1. Vuelve a insertar tu tarjeta SD en tu consola
 1. Enciende tu consola
 
@@ -79,8 +70,6 @@ Si, antes de seguir esta guía, ya tenías una configuración EmuNAND y deseas m
   + Actualizar la consola teniendo B9S y Luma (lo que acabas de instalar) es seguro
   + Si esto te da un error, ajusta tu configuración de DNS a "obtención automática"
   + Si esto te sigue dando un error y tu NAND está por debajo de 9.2.0, [sigue 9.2.0 CTRTransfer(9.2.0-ctrtransfer), luego reintenta actualizar
-1. Si tu consola estaba en una versión anterior a 9.0.0 antes de actualizar, reemplaza `boot.firm` en la raíz de tu tarjeta SD con el de la [última versión de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Si tu consola estaba en una versión entre 3.0.0 y 4.5.0 antes de actualizar, elimina `native.firm` y `cetk` de la carpeta `/luma/` en tu tarjeta SD
 
 ##### Sección III - Iniciar FBI
 

_pages/es_ES/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "Guía de 3DS" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Comencemos" #
   cta_url: "/es_ES/get-started"

_pages/es_ES/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
   + Si tu juego tiene un error sobre datos de guardado corruptos o inaccesibles, asegúrate que hayas copiado **el contenido de** la carpeta `savedata` y no la carpeta `savedata` en sí
   + Si tu juego funciona con normalidad y no da ningún error sobre `boot.nds`, entonces debes parar y averiguar qué salió mal
   + Si obtienes una pantalla negra, [sigue esta guía de solución de problemas](troubleshooting#twl_broken)
-  + Si el juego no aparece en la **3DS de destino** o tiene un error sobre datos de guardado corruptos o inaccesibles, [sigue esta guía de solución de problemas](troubleshooting#ts_dsiware)
 
 ##### Sección III - Transferencia del Sistema
 
@@ -121,8 +120,8 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
     + Puedes también [eliminar el ID de Nintendo Network](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS de Origen** si prefieres que permanezca en **la 3DS de Destino**
 1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
 1. Inicia GodMode9 presionando (A)
-1. Ve a `[0:] SDCARD`
+1. Ve a `[0:] SDCARD` -> `gm9out`
-1. Presiona (A) sobre el `nand.bin` de tu NAND para seleccionarlo, luego selecciona "NAND image options..." y luego selecciona "Restore SysNAND (safe)"
+1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options..." y luego "Restore SysNAND (safe)"
 1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
   + Esto no sobreescribirá tu instalación de boot9strap
 1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
@@ -139,12 +138,11 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
 1. Copia el archivo 11.4.0 `.firm` correspondiente a **la 3DS de destino** a la carpeta `boot9strap` en la raíz de la tarjeta SD de **la 3DS de destino**
 1. Copia el archivo `boot9strap.firm` desde el `.zip` de boot9strap a la carpeta `/boot9strap/` en tu tarjeta SD
 1. Ejecuta b9sTool iniciando tu juego DSiWare en **la 3DS de destino**
-  + Si el juego no inicia b9sTool, [sigue esta guía de resolución de problemas](troubleshooting#ts_dsiware)
+  + Si el juego no está o no inicia b9sTool, [sigue esta guía de resolución de problemas](troubleshooting#ts_dsiware)
 1. Selecciona "Dump F0F1" para hacer una copia de seguridad del FIRM de **la 3DS de destino**
-1. Toma nota de la ubicación de la copia de seguridad del FIRM
 1. Sal de b9sTool
   + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
-1. Pon tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) a una ubicación segura; haz respaldos en múltiples ubicaciones; este respaldo te salvará de un brick por si algo sale mal
+1. Introduce tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) de la carpeta `boot9strap` a una ubicación segura; haz copias de seguridad en distintas ubicaciones; este respaldo te salvará de un brick si algo sale mal
 1. Vuelve a insertar tu tarjeta SD en la **3DS de destino**
 
 ##### Sección VI - Flashear el FIRM de la 3DS de destino

_pages/es_ES/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
     + Puedes también [eliminar el ID de Nintendo Network](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS de Origen** si prefieres que permanezca en **la 3DS de Destino**
 1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
 1. Inicia GodMode9 presionando (A)
-1. Ve a `[0:] SDCARD`
+1. Ve a `[0:] SDCARD` -> `gm9out`
-1. Presiona (A) sobre el `nand.bin` de tu NAND para seleccionarlo, luego selecciona "NAND image options..." y luego selecciona "Restore SysNAND (safe)"
+1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options..." y luego "Restore SysNAND (safe)"
 1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
   + Esto no sobreescribirá tu instalación de boot9strap
 1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
@@ -152,10 +152,9 @@ Usa un [Gestor de datos de guardado](https://github.com/J-D-K/JKSM/releases/late
   + **The Legend of Zelda: Four Swords**: Sólo inicia el juego
   + Si el juego no tiene la partida hackeada instalada, [sigue esta guía de solución de problemas](troubleshooting#ts_dsiware)
 1. Selecciona "Dump F0F1" para hacer una copia de seguridad del FIRM de **la 3DS de destino**
-1. Toma nota de la ubicación de la copia de seguridad del FIRM
 1. Sal de b9sTool
   + Puede que tengas que forzar el apagado manteniendo pulsado el botón de encendido
-1. Pon tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) a una ubicación segura; haz respaldos en múltiples ubicaciones; este respaldo te salvará de un brick por si algo sale mal
+1. Introduce tu tarjeta SD en tu computadora, luego copia `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (dependiendo de tu consola) de la carpeta `boot9strap` a una ubicación segura; haz copias de seguridad en distintas ubicaciones; este respaldo te salvará de un brick si algo sale mal
 1. Vuelve a insertar tu tarjeta SD en la **3DS de destino**
 
 ##### Sección VI - Flashear el FIRM de la 3DS de destino

_pages/es_ES/troubleshooting.txt

@@ -122,6 +122,26 @@ Los exploits basados en navegador (como browserhax o 2xrsa) son a menudo inestab
     1. Si entras al modo seguro, actualiza tu consola
 1. Tu consola podría estar brickeada. Para soporte, puedes pedir ayuda (*en inglés*) en el [Discord de Nintendo Homebrew](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />Después de hacer la transferencia de DSiWare Transfer, mi consola hackeada con DSiWare no funciona
+
+1. Reinicia **la 3DS de origen** manteniendo presionado (Start) para ingresar al menú de selección de payloads de Luma3DS
+1. Inicia GodMode9 presionando (A)
+1. Ve a `[0:] SDCARD` -> `gm9out`
+1. Presiona (A) sobre `nand.bin` para seleccionarlo, luego selecciona "NAND image options…" y luego "Restore SysNAND (safe)"
+1. Presiona (A) para desbloquear la sobreescritura de la SysNAND, luego introduce la combinación de teclas mostrada
+  + Esto no sobreescribirá tu instalación de boot9strap
+1. Ingresa la combinación de teclas mostrada para desbloquear la escritura de la SysNAND (lvl1)
+  + Este proceso tomará algún tiempo
+1. Una vez que haya terminado, presiona (A) para continuar
+1. Si no ves el juego en la **3DS de destino**, pon el NNID con el que compraste el juego en la **3DS de destino** y vuelve a descargarlo
+  + Quizá tengas que eliminar el juego desde "Gestión de datos" en la "Configuración de la consola" primero
+  + Si la **3DS de destino** no está en la última versión, quizá tengas que ejecutar ctr-httpwn para acceder a la eShop
+1. En la **3DS destino** haz los pasos para inyectar el save (y el `.app` si estás usando la página del `.app`)
+1. En la **3DS de origen**, ve a Configuración de la consola, "Gestión de datos", "DSiWare" y copia el juego a la tarjeta SD
+1. Pon la tarjeta SD de la **3DS de origen** en la **3DS de destino**, o renombra la carpeta `Nintendo 3DS` en la tarjeta SD de la **3DS de destino** y copia la carpeta `Nintendo 3DS` de la **3DS de origen** a la tarjeta SD de la **3DS de destino**
+1. En la **3DS de origen**, ve a Configuración de la consola, "Gestión de datos", "DSiWare" y copia el juego al sistema
+1. Deja las tarjetas SD como estaban al principio y continúa con la Inyección de DSiWare
+
 ## <a name="ts_sys_b9s" />Pantalla negra al iniciar la SysNAND luego de instalar boot9strap
 
 1. Asegúrate de tener un payload funcional.

_pages/fi_FI/finalizing-setup.txt

@@ -55,15 +55,6 @@ Tämän prosessin aikana myös asennetaan muun muassa seuraavat ohjelmat:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Lataa [tämä tiedosto](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Aseta SD-korttisi takaisin konsoliisi
 1. Käynnistä konsolisi
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/fi_FI/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS-opas" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Aloita" #
   cta_url: "/fi_FI/get-started" #

_pages/fi_FI/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Avaa GodMode9 painamalla (A):ta
-1. Mene hakemistoon `[0:] SDCARD`
+1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
-1. Paina (A):ta NAND-`.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
+1. Paina (A):ta `nand.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
 1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
   + This will not overwrite your boot9strap installation
 1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/fi_FI/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Avaa GodMode9 painamalla (A):ta
-1. Mene hakemistoon `[0:] SDCARD`
+1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
-1. Paina (A):ta NAND-`.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
+1. Paina (A):ta `nand.bin`-tiedoston kohdalla, valitse "NAND image options..." ja sitten "Restore SysNAND (safe)"
 1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
   + This will not overwrite your boot9strap installation
 1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/fi_FI/troubleshooting.txt

@@ -122,6 +122,26 @@ Selainhaavoittuvuuksiin perustuvat käynnistystavat (kuten browserhax ja 2xrsa)
     1. If you enter safe mode, update your device
 1. Konsolisi saattaa olla vioittunut. Kysy apua (englanniksi) [Nintendo Homebrew -palvelimelta Discordissa](https://discord.gg/MWxPgEp).
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Avaa GodMode9 painamalla (A):ta
+1. Mene hakemistoon `[0:] SDCARD` → `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Paina (A):ta ottaaksesi käyttöön SysNANDin ylikirjoittamisen ja syötä annettu painikeyhdistelmä
+  + This will not overwrite your boot9strap installation
+1. Syötä annettu painikeyhdistelmä ottaaksesi käyttöön SysNANDiin kirjoittamisen (lvl1)
+  + Tämä proessi kestää jonkin aikaa
+1. Kun toiminto on suoritettu, paina (A):ta jatkaaksesi
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Varmista, että sinulla on toimiva käynnistystiedosto.

_pages/fr_FR/finalizing-setup.txt

@@ -55,15 +55,6 @@ Durant cette étape, nous allons également configurer les programmes suivants :
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. Si votre console possède un firmware antérieur à 9.0.0, votre console ne démarra pas sauf si vous utilisez une version alternative de Luma3DS:
-  + Téléchargez [Une ancienne version de Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copiez `boot.firm` à la racine de votre carte SD *(En écrasant les fichiers existants)*
-  + Remplacez le `boot.firm` avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) après avoir mis à jour votre console plus tard dans ce guide
-1. Si votre appareil est sur une version entre 3.0.0 à 4.5.0 (inclue), votre appareil ne démarrera pas jusqu'à ce que vous téléchargiez manuellement le firmware requis :
-  + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) et renommez-le `native.firm`
-  + Téléchargez [ce fichier](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copiez `native.firm` et `cetk` au dossier `/luma/` dans ta carte SD
-  + Supprimez ces deux fichiers après avoir mit à jour votre console plus loin dans ce mode d’emploi
 1. Réinsérez votre carte SD dans votre 3DS
 1. Allumez à présent votre 3DS
 
@@ -79,8 +70,6 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
   + Mettre à jour tout en utilisant B9S + Luma (ce que vous avez) sont sans danger
   + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
   + Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
-1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD
 
 ##### Section III - Lancez FBI
 

_pages/fr_FR/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Bien Démarrer" #
   cta_url: "/fr_FR/get-started" #

_pages/fr_FR/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
   + Si votre jeu montre une erreur à propos de données endommagées ou de sauvegarde innaccessible, vérifiez que vous aviez copié **le contenu du** dossier `savedata` et pas le dossier `savedata` lui-même
   + Si votre jeu se comporte normalement et ne montre aucune erreur à propos de `boot.nds`, alors vous devez vous arrêter et essayer de comprendre ce qui s’est mal passé
   + Si vous obtenez un écran noir, [suivez ce guide de dépannage](troubleshooting#twl_broken)
-  + Si le jeu est absent de **la 3DS cible** ou montre une erreur à propos de données corrompues ou de sauvegarde inaccessibles, [suivre ce guide](troubleshooting#ts_dsiware)
 
 ##### Section III - Transfert de données
 
@@ -121,8 +120,8 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
     + Vous pouvez également juste [supprimer le NNID](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS source** si vous préférez qu'il reste sur **la 3DS cible**
 1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
 1. Lancez GodMode9 en appuyant sur (A)
-1. Naviguez vers `[0:] SDCARD`
+1. Naviguez vers `[0:] SDCARD` -> `gm9out`
-1. Appuyez sur (A) sur votre NAND `.bin` pour le sélectionner, puis choisissez "NAND image options...", puis sélectionnez "Restore SysNAND (safe)"
+1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
 1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
   + Ceci n'effacera pas votre installation boot9strap
 1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
@@ -141,10 +140,9 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
 1. Lancement de b9sTool en démarrant votre jeu DSiWare sur **la 3DS cible**
   + Si le jeu ne lance pas b9sTool, [suivez ce guide de dépannage](troubleshooting#ts_dsiware)
 1. Sélectionnez "Dump F0F1" pour sauvegarder le FIRM de la **3DS cible**
-1. Prenez note de l’emplacement de la sauvegarde de la NFIRM
 1. Sortez de b9sTool
   + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
-1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
+1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) du dossier `boot9strap` dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
 1. Réinsérer votre carte SD dans **la 3DS cible**
 
 ##### Section VI - Flasher le FIRM de la 3DS cible

_pages/fr_FR/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
     + Vous pouvez également juste [supprimer le NNID](https://3ds.guide/troubleshooting#rm_nnid) de **la 3DS source** si vous préférez qu'il reste sur **la 3DS cible**
 1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
 1. Lancez GodMode9 en appuyant sur (A)
-1. Naviguez vers `[0:] SDCARD`
+1. Naviguez vers `[0:] SDCARD` -> `gm9out`
-1. Appuyez sur (A) sur votre NAND `.bin` pour le sélectionner, puis choisissez "NAND image options...", puis sélectionnez "Restore SysNAND (safe)"
+1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
 1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
   + Ceci n'effacera pas votre boot9strap
 1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
@@ -152,10 +152,9 @@ Utilisez [save manager](https://github.com/J-D-K/JKSM/releases/latest) pour fair
   + **The Legend of Zelda: Four Swords**: Il suffit de démarrer le jeu
   + Si votre jeu n’a pas la sauvegarde piratée d'installée, [suivez ce guide](troubleshooting#ts_dsiware)
 1. Sélectionnez "Dump F0F1" pour sauvegarder le FIRM de la **3DS cible**
-1. Prenez note de l’emplacement de la sauvegarde de la NFIRM
 1. Sortez de b9sTool
   + Vous allez peut-être devoir forcer la fermeture en maintenant le bouton d’alimentation enfoncé
-1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
+1. Mettez votre carte SD dans votre ordinateur, puis copiez `F0F1_N3DS.bin` ou `F0F1_O3DS.bin` (selon votre appareil) du dossier `boot9strap` dans un endroit sûr ; faites des sauvegardes à plusieurs emplacements ; cette sauvegarde vous sauvera d’un BRICK si quelque chose se passe mal
 1. Réinsérer votre carte SD dans **la 3DS cible**
 
 ##### Section VI - Flasher le FIRM de la 3DS cible

_pages/fr_FR/installing-boot9strap-(hardmod).txt

@@ -16,7 +16,7 @@ Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versi
 
 #### Ce dont vous aurez besoin
 
-* Une image de votre NAND extraite à l’aide de votre [hardmod](http://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds)
+* Une image de votre NAND extraite à l’aide de votre [hardmod](https://gbatemp.net/threads/414498/) [Kits Hardmod](http://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds)
 * La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(boot9strap standard, pas le fichier `devkit` et ni le fichier `ntr`)*
 * La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
   + Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py`

_pages/fr_FR/troubleshooting.txt

@@ -122,6 +122,26 @@ Les exploits basé sur le navigateur (tel que browserhax ou 2xrsa) sont parfois
     1. Si vous passez en mode sécurisé, mettre à jour votre console
 1. Votre console est peut-être brickée. Pour obtenir de l'aide, demandez de l'aide à [Nintendo Homebrew sur Discord(Anglais)](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />Après avoir fait le downgrade par DSiWare, mon DSiWare hacké ne fonctionne pas
+
+1. Rallumez la **3DS source** en maintenant (Start) pour lancer le chainloader de Luma3DS
+1. Lancez GodMode9 en appuyant sur (A)
+1. Naviguez vers `[0:] SDCARD` -> `gm9out`
+1. Appuyez sur (A) sur `nand.bin` pour le sélectionner, puis choisissez "NAND image options...", puis "Restore SysNAND (safe)"
+1. Appuyez sur (A) pour débloquer l'écriture sur votre SysNAND, puis entrez la combinaison de touches demandée
+  + Ceci n'effacera pas votre installation boot9strap
+1. Entrez la combinaison de touche demandée pour débloquer l'écriture sur votre SysNAND (lvl1)
+  + Ce processus pendra du temps
+1. Une fois le transfert terminé, appuyez sur (A) pour continuer
+1. Si vous ne voyez pas du tout le jeu sur **la 3DS cible**, liez le NNID avec lequel vous avez acheté le jeu sur **la 3DS cible** et re-téléchargez le
+  + Vous devrez peut-être tout d’abord supprimer le jeu depuis "Gestion des données" dans les Paramètres de la console
+  + Si **la 3DS cible** n'est pas à la dernière version, vous pourriez avoir à lancer ctr-httpwn pour accéder à l'eShop
+1. Sur la **3DS source**, effectuez les étapes d'injections de sauvegarde (et de `.app` si vous utilisez la page "injection d'`.app`")
+1. Sur la **3DS source, allez dans les Paramètres de la console, "Gestion des données", "DSiWare", puis copiez votre jeu DSiWare sur la carte SD
+1. Insérez la carte SD de la **3DS source** dans la **3DS cible**, ou bien renommez le dossier `Nintendo 3DS` sur la carte SD de la **3DS cible** et copiez le dossier `Nintendo 3DS` de la carte SD de la **3DS source** sur la carte SD de la **3DS cible**
+1. Sur la **3DS cible**, allez dans les Paramètres de la console, "Gestion des données", "DsiWare", puis copiez votre jeu DSiWare sur le système
+1. Remettez vos cartes SD comme avant, puis continuez votre Injection via DSiWare
+
 ## <a name="ts_sys_b9s" /> Écran noir au démarrage de SysNAND après l’installation de boot9strap
 
 1. Assurez-vous d'avoir un payload fonctionnel.

_pages/he_IL/finalizing-setup.txt

@@ -55,15 +55,6 @@ title: "סיום התהליך"
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. אם הקונסולה שלכם מתחת לגרסה 9.0.0, היא לא תפעל אלא אם כן תשתמשו בגרסא חלופית של Luma3DS:
-  + תורידו [גרסה מיוחדת של Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + תעתיקו את `boot.firm` אל שורש כרטיס הSD שלכם *(תשכתבו את הקובץ הקיים אם יש)*
-  + תחליפו את ה`boot.firm` הזה עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) אחרי שאתם מעדכנים את הקונסולה מאוחר יותר בהוראות
-1. אם המכשיר שלכם הוא על גרסה בין 3.0.0 ל-4.5.0, המכשיר שלכם שלכם לא יאתחל עד שתורידו את הקושחה המתאימה:
-  תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ושנו לו את השם ל-`native.firm`
-  + תורידו את [הקובץ הזה](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + תעתיקו את `native.firm` ואת `cetk` לתוך התיקייה `/luma/` שב-SD שלכם
-  + תמחקו את שני הקבצים האלו אחרי שאתם מעדכנים את המכשיר שלכם אחר כך בהוראות
 1. תכניסו מחדש את כרטיס הSD שלכם לתוך המכשיר שלכם
 1. תפעילו את המכשיר
 
@@ -79,8 +70,6 @@ title: "סיום התהליך"
   + עדכונים שתבצעו תוך שימוש ב-B9S+Luma (במידה שיש לכם את שניהם) הם בטוחים לחלוטין
   + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
   + אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
-1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
 
 ##### חלק III - הפעלת FBI
 

_pages/he_IL/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "מדריך ל3DS" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "צעדים ראשונים" #
   cta_url: "/he_IL/get-started" #

_pages/he_IL/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
   + אם למשחק יש שגיאה לגבי שמירה פגומה או לא ניתנת לגישה, תבדקו שהעתקתם את **התוכן של** תיקיית `savedata` ולא את התיקייה `savedata` בעצמה
   + אם המשחק עובד כרגיל ולא נותן לכם את השגיאה לגבי boot.nds, תעצרו ותנסו להבין מה לא הלך טוב
   + אם אתם מקבלים מסך שחור, [עקבו אחרי המדריך הבא](troubleshooting#twl_broken)
-  + אם המשחק חסר מ**קונסולת היעד** או שיש לו שגיאה לגבי שמירה פגומה או לא ניתנת לגישה, [עקבו אחרי המדריך הבא](troubleshooting#twl_broken)
 
 #### חלק III - ביצוע System Transfer
 
@@ -121,8 +120,8 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
     + אתם יכולים גם פשוט [למחוק את הNNID](https://3ds.guide/troubleshooting#rm_nnid) מ**קונסולת המקור** אם אתם מעדיפים שהוא ישאר על **קונסולת היעד**
 1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
 1. תפעילו את GodMode9 על ידי לחיצת (A)
-1. נווטו ל`[0:] SDCARD`
+1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
-1. תלחצו (A) על קובץ ה`.bin` של הNAND שלכם כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
+1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
 1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
   + זה לא ישכתב את התקנת boot9strap שלכם
 1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
@@ -139,12 +138,11 @@ title: "התקנת boot9strap (הזרקת משחק DSiWare)"
 1. תעתיקו את ה`.firm` של 11.4.0 שמתאים ל**קונסולת היעד** לתיקיית `boot9strap` על שורש כרטיס הSD של **קונסולת היעד**
 1. תעתיקו את`boot9strap.firm` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
 1. תפעילו את b9sTool על ידי הפעלת משחק הDSiWare שלכם על **קונסולת היעד**
-  + אם המשחק לא מפעיל את b9sTool, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
+  + אם המשחק לא נמצא או לא מפעיל את b9sTool, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
 1. תבחרו ב "Dump F0F1" כדי לגבות את הFIRM של **קונסולת היעד**
-1. שימו לב למקום גיבוי הFIRM
 1. תצאו מb9sTool
   + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
-1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
+1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) מתיקיית `boot9strap` למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
 1. תכניסו מחדש את כרטיס הSD שלכם אל **קונסולת היעד**
 
 ##### חלק VI - התקנת הFIRM הפרוץ על קונסולת היעד

_pages/he_IL/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
     + אתם יכולים גם פשוט [למחוק את הNNID](https://3ds.guide/troubleshooting#rm_nnid) מ**קונסולת המקור** אם אתם מעדיפים שהוא ישאר על **קונסולת היעד**
 1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
 1. תפעילו את GodMode9 על ידי לחיצת (A)
-1. נווטו ל`[0:] SDCARD`
+1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
-1. תלחצו (A) על קובץ ה`.bin` של הNAND שלכם כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
+1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options...", ושם ב "Restore SysNAND (safe)"
 1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
   + זה לא ישכתב את התקנת boot9strap שלכם
 1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
@@ -152,10 +152,9 @@ title: "התקנת boot9strap (הזרקת שמירת DSiWare)"
   + **The Legend of Zelda: Four Swords**: פשוט תפעילו את המשחק
   + אם למשחק שלכם אין את השמירה הפרוצה מותקנת, [תעקבו אחרי המדריך הזה לפתרון בעיות](troubleshooting#ts_dsiware)
 1. תבחרו ב "Dump F0F1" כדי לגבות את הFIRM של **קונסולת היעד**
-1. שימו לב למקום גיבוי הFIRM
 1. תצאו מb9sTool
   + אולי תצטרכו לאלץ כיבוי על ידי החזקת כפתור ההפעלה
-1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
+1. תשימו את כרטיס הSD שלכם במחשב, ואז תעתיקו את `F0F1_N3DS.bin` או `F0F1_O3DS.bin` (תלוי במכשיר) מתיקיית `boot9strap` למקום בטוח; תעשו גיבויים בכמה מקומות; זה ישמור עליכם מבריק אם משהו לא הולך כראוי
 1. תכניסו מחדש את כרטיס הSD שלכם אל **קונסולת היעד**
 
 ##### חלק VI - התקנת הFIRM הפרוץ על קונסולת היעד

_pages/he_IL/troubleshooting.txt

@@ -123,6 +123,26 @@ title: "פתרון בעיות"
     1. אם אתם מגיעים למצב בטוח, תעדכנו את הקונסולה שלכם
 1. יש סיכוי שחטפתם בריק. לקבלת תמיכה, תבקשו עזרה ב[Nintendo Homebrew על Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />אחרי שעשיתי את מעבר הDSiWare, ה DSiWare הפרוץ לא עובד
+
+1. תפעילו מחדש את **קונסולת המקור** בזמן שאתם מחזיקים (Start) במהלך האתחול כדי להפעיל את תפריט הטעינה של Luma3DS
+1. תפעילו את GodMode9 על ידי לחיצת (A)
+1. נווטו אל `[0:] SDCARD` ושם אל `gm9out`
+1. תלחצו (A) על `nand.bin` כדי לבחור בו, ואז תבחרו ב "NAND image options…", ושם ב "Restore SysNAND (safe)"
+1. לחצו (A) כדי לפתוח גישת שכתוב לSysNAND, ואז תלחצו על המקשים בסדר הנכון
+  + זה לא ישכתב את התקנת boot9strap שלכם
+1. תלחצו על המקשים בסדר הנכון כדי לפתוח גישת כתיבה לSysNAND (בlvl1)
+  + זה ייקח קצת זמן
+1. כאשר התהליך מסתיים, לחצו על (A) כדי להמשיך
+1. אם אתם לא רואים בכלל את המשחק על ה**3DS הלא פרוץ**, תחברו את הNNID שקניתם איתו את המשחק אל ה**3DS הלא פרוץ** ותורידו אותו
+  + אולי קודם תצטרכו למחוק את המשחק מ"Data Management" ב "System Settings"
+  + אם ה**3DS הלא פרוץ** לא מעודכן, אולי תצטרכו להריץ ctr-httpwn כדי להתחבר לאישופ
+1. על ה**3DS הפרוץ**, תעשו שוב את השלבים של הכנסת הsave (וה`.app` אם נדרש)
+1. על ה**3DS הפרוץ**, לכו להגדרות, "Data Management" ואז"DSiWare", ואז תעתיקו את המשחק DSiWare לSD
+1. או שתשימו את הSD של **ה3DS הפרוץ** ב **3DS הלא פרוץ**, או שתשנו את השם של תיקיית `Nintendo 3DS` על הSD של **ה3DS הלא פרוץ**ותעתיקו את תיקיית `Nintendo 3DS` מהSD של **ה3DS הפרוץ** אל הSD של **ה3DS הלא פרוץ**
+1. על ה**3DS הלא פרוץ**, לכו להגדרות, "Data Management" ואז"DSiWare", ואז תעתיקו את המשחק DSiWare למערכת
+1. תחזירו את הכרטיסי SD שלכם למצב שהיה ותמשיכו עם ההזרקת DSi
+
 ## <a name="ts_sys_b9s" />מסך שחור בהפעלת SysNAND אחרי התקנת boot9strap
 
 1. תבדקו שיש לכם תוכנה עובדת.

_pages/hu_HU/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/hu_HU/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/hu_HU/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/hu_HU/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/hu_HU/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/id_ID/finalizing-setup.txt

@@ -55,15 +55,6 @@ During this process, we also setup programs such as the following:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + If this gives you an error, set your DNS settings to "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/id_ID/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Get Started" #
   cta_url: "get-started" #

_pages/id_ID/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/id_ID/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/id_ID/troubleshooting.txt

@@ -122,6 +122,26 @@ Browser based exploits (such as browserhax or 2xrsa) are often unstable and cras
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Ensure you have a working payload.

_pages/it_IT/finalizing-setup.txt

@@ -55,15 +55,6 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. Se la tua console ha la versione di sistema inferiore a 9.0.0, non si avvierà finché non userai una versione compatibile di Luma3DS:
-  + Scarica una [versione precedente di Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copia il file `boot.firm` nella directory principale della tua scheda SD *(sovrascrivendo eventualmente qualunque file già presente)*
-  + Sostituisci questo file `boot.firm` con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) dopo aver aggiornato la console seguendo le istruzioni riportate nelle sezioni successive
-1. Se la tua console è ad una versione del software compresa tra 3.0.0 e 4.5.0 (incluse), non si avvierà finché non avrai scaricato manualmente la versione del software richiesta:
-  + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) e rinominalo `native.firm`
-  + Scarica [questo file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copia i file `native.firm` e `cetk` nella cartella `/luma/` della tua scheda SD
-  + Elimina entrambi i file dopo aver aggiornato la console nel relativo passaggio di questa sezione
 1. Reinserisci la scheda SD nel Nintendo 3DS
 1. Accendi la console
 
@@ -79,8 +70,6 @@ Se prima di seguire questa guida avevi già un'installazione EmuNAND presente e
   + Gli aggiornamenti effettuati usando B9S + Luma (ora installato) sono sicuri
   + Se ottieni un errore, imposta i DNS della connessione di rete in modo che vengano ottenuti automaticamente
   + Se continui ad ottenere un errore e la tua NAND è ad una versione precedente di 9.2.0, [segui la guida per il CTRTransfer 9.2.0](9.2.0-ctrtransfer), poi riprova ad aggiornare la console
-1. Se la tua console era ad una versione del sistema inferiore a 9.0.0 prima dell'aggiornamento, sostituisci il file `boot.firm` nella directory principale della tua scheda SD con quello dell'[ultima versione di Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Se la tua console era ad una versione del sistema compresa tra 3.0.0 e 4.5.0 prima dell'aggiornamento, elimina i file `native.firm` e `cetk` dalla cartella `/luma/` sulla tua scheda SD
 
 ##### Sezione III - Avviare FBI
 

_pages/it_IT/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "Guida" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Cominciamo!" #
   cta_url: "/it_IT/get-started" #

_pages/it_IT/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
   + Se il gioco presenta un errore riguardo dei dati danneggiati o inaccessibili, assicurati di aver copiato **il contenuto** della cartella `savedata` e non la cartella stessa
   + Se il tuo gioco si comporta normalmente e non presenta alcun errore relativo a `boot.nds`, dovresti capire quali passi della guida non hai eseguito
   + Se ottieni una schermata nera, [segui questa guida](troubleshooting#twl_broken)
-  + Se il gioco non è presente sul **3DS di destinazione** o presenta un errore riguardo dei dati danneggiati o inaccessibili, [segui questa guida per capire il problema](troubleshooting#ts_dsiware)
 
 ##### Sezione III - Trasferimento dati
 
@@ -121,8 +120,8 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
     + Puoi anche semplicemente [rimuovere il NNID](https://3ds.guide/troubleshooting#rm_nnid) dal **3DS di partenza** se vuoi che rimanga sul **3DS di destinazione**
 1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
 1. Avvia GodMode9 premendo (A)
-1. Entra in `[0:] SDCARD`
+1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
-1. Premi (A) sul file `.bin` della NAND per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
+1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
 1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
   + Questo processo non eliminerà boot9strap
 1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
@@ -139,12 +138,11 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
 1. Copia il file `.firm` della versione del software 11.4.0 corrispondente al **3DS di destinazione** nella cartella `boot9strap` nella directory principale della scheda SD del **3DS di destinazione**
 1. Copia il file `boot9strap.firm` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
 1. Lancia b9sTool avviando il gioco DSiWare sul **3DS di destinazione**
-  + Se b9sTool non viene avviato al lancio del gioco, [segui questa guida](troubleshooting#ts_dsiware)
+  + Se il gioco dovesse essere assente o se b9sTool non dovesse avviarsi al lancio del gioco, [segui questa guida](troubleshooting#ts_dsiware)
 1. Seleziona "Dump F0F1" per salvare un backup del FIRM del **3DS di destinazione**
-1. Prendi nota della posizione del backup del FIRM
 1. Esci da b9sTool
   + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
-1. Metti la tua scheda SD nel tuo computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) in una posizione sicura; crea più copie; questi file ti salveranno da un brick in caso qualcosa vada storto
+1. Inserisci la tua scheda SD nel computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) dalla cartella `boot9strap` in una posizione sicura; crea dei backup in più posti; questi backup ti salveranno da un brick nel caso qualcosa dovesse andare storto
 1. Reinserisci la tua scheda SD nel **3DS di destinazione**
 
 ##### Sezione VI - Flash del FIRM sul 3DS di destinazione

_pages/it_IT/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
     + Puoi anche semplicemente [rimuovere il NNID](https://3ds.guide/troubleshooting#rm_nnid) dal **3DS di partenza** se vuoi che rimanga sul **3DS di destinazione**
 1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
 1. Avvia GodMode9 premendo (A)
-1. Entra in `[0:] SDCARD`
+1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
-1. Premi (A) sul file `.bin` della NAND per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
+1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
 1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
   + Questo processo non eliminerà boot9strap
 1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
@@ -152,10 +152,9 @@ Usa un [save manager](https://github.com/J-D-K/JKSM/releases/latest) per eseguir
   + **The Legend of Zelda: Four Swords**: Avvia normalmente il gioco
   + Se il gioco non presenta alcun salvataggio modificato installato, [segui questa guida per risolvere il problema](troubleshooting#ts_dsiware)
 1. Seleziona "Dump F0F1" per salvare un backup del FIRM del **3DS di destinazione**
-1. Prendi nota della posizione del backup del FIRM
 1. Esci da b9sTool
   + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
-1. Metti la tua scheda SD nel tuo computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) in una posizione sicura; crea più copie; questi file ti salveranno da un brick in caso qualcosa vada storto
+1. Inserisci la tua scheda SD nel computer, quindi copia il file `F0F1_N3DS.bin` o `F0F1_O3DS.bin` (a seconda della tua console) dalla cartella `boot9strap` in una posizione sicura; crea dei backup in più posti; questi backup ti salveranno da un brick nel caso qualcosa dovesse andare storto
 1. Reinserisci la tua scheda SD nel **3DS di destinazione**
 
 ##### Sezione VI - Flash del FIRM sul 3DS di destinazione

_pages/it_IT/troubleshooting.txt

@@ -122,6 +122,26 @@ Questo tipo di exploit (come browserhax o 2xrsa) è instabile e tende a crashare
     1. Se entri in modalità provvisoria, aggiorna la console
 1. La console potrebbe essere brickata. Se hai bisogno di aiuto, chiedi pure su [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp) (in inglese)
 
+## <a name="ts_dsiware" />Dopo aver eseguito il Trasferimento DSiWare, il mio DSiWare hackato non funziona
+
+1. Riavvia **il 3DS di partenza** tenendo premuto (Start) per avviare il menu chainloader di Luma3DS
+1. Avvia GodMode9 premendo (A)
+1. Entra nella cartella `[0:] SDCARD` -> `gm9out`
+1. Premi (A) su `nand.bin` per selezionarlo, quindi seleziona "NAND image options...", ed infine seleziona "Restore SysNAND (safe)"
+1. Premi il pulsante (A) per sbloccare la sovrascrittura su SysNAND, quindi inserisci la combinazione di tasti richiesta a schermo
+  + Questo processo non eliminerà boot9strap
+1. Inserisci la combinazione di tasti richiesta a schermo per sbloccare i permessi di scrittura di primo livello su SysNAND
+  + Questo processo durerà un po'
+1. Una volta completato, premi (A) per proseguire
+1. Se non vedi il gioco sul **3DS di destinazione**, collega il NNID con cui hai comprato il gioco al **3DS di destinazione** e riscaricalo
+  + Potresti dover prima eliminare il gioco da "Gestione dati" in "Impostazioni della console"
+  + Se il **3DS di destinazione** non ha l'ultima versione di sistema, potresti aver bisogno di avviare ctr-httpwn per accedere all'eShop
+1. Sul **3DS di partenza**, esegui la procedura di inject del salvataggio (e anche del file `.app` se stai seguendo la pagina relativa)
+1. Sul `3DS di partenza`, vai su Impostazioni della console, "Gestione dati", "DSiWare", quindi copia il tuo gioco DSiWare nella scheda SD
+1. Puoi o inserire la scheda SD del **3DS di partenza** nel **3DS di destinazione**, o rinominare la cartella `Nintendo 3DS` della scheda SD del **3DS di destinazione** e poi copiare la cartella `Nintendo 3DS` dalla scheda SD del **3DS di partenza** nella scheda SD del **3DS di destinazione**
+1. Nel **3DS di destinazione**, vai su Impostazioni della console, "Gestione dati", "DSiWare", quindi copia il tuo gioco DSiWare nella console
+1. Ripristina lo stato iniziale delle schede SD, quindi prosegui con l'Injection DSiWare
+
 ## <a name="ts_sys_b9s" />Schermo nero all'avvio della SysNAND dopo l'installazione di boot9strap
 
 1. Assicurati che il payload funzioni.

_pages/ja_JP/finalizing-setup.txt

@@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + [このファイル](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)をダウンロードします
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + エラーが発生すれば、DNS設定を「自動」に変更してください
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/ja_JP/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Guide" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "はじめる" #
   cta_url: "/ja_JP/get-started" #

_pages/ja_JP/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ja_JP/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ja_JP/troubleshooting.txt

@@ -122,6 +122,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. 機能しているペイロードを持っていることを確保します。

_pages/ko_KR/finalizing-setup.txt

@@ -55,15 +55,6 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + 이 [파일](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)을 다운로드해 주세요.
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. SD 카드를 기기에 다시 삽입해 주세요.
 1. 기기를 시작해 주세요.
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/ko_KR/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS 가이드" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "시작하기"
   cta_url: "/ko_KR/get-started" #

_pages/ko_KR/installing-boot9strap-(dsiware-game-injection).txt

@@ -95,7 +95,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -122,8 +121,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. (A)를 눌러 GodMode9을 실행해 주세요.
-1. `[0:] SDCARD`로 이동해 주세요.
+1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
-1. `NAND.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
+1. `nand.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
 1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
   + This will not overwrite your boot9strap installation
 1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
@@ -140,12 +139,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ko_KR/installing-boot9strap-(dsiware-save-injection).txt

@@ -128,8 +128,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. (A)를 눌러 GodMode9을 실행해 주세요.
-1. `[0:] SDCARD`로 이동해 주세요.
+1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
-1. `NAND.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
+1. `nand.bin`에 (A)를 눌러 선택하고 "NAND image options..."를 선택하고 "Restore SysNAND (safe)"를 선택해 주세요.
 1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
   + This will not overwrite your boot9strap installation
 1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
@@ -153,10 +153,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ko_KR/troubleshooting.txt

@@ -123,6 +123,26 @@ Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only dis
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. (A)를 눌러 GodMode9을 실행해 주세요.
+1. `[0:] SDCARD` -> `gm9out`으로 이동해 주세요.
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. (A)를 눌러 SysNAND 덮어쓰기 잠금을 풀고 주어진 키 조합을 입력해 주세요.
+  + This will not overwrite your boot9strap installation
+1. SysNAND (lvl1) 쓰기 잠금을 풀기 위해 주어진 키 조합을 입력해 주세요.
+  + 이 과정은 시간이 좀 걸릴 것입니다.
+1. 작업이 완료되면 (A)를 눌려 계속해 주세요.
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. 작동하는 페이로드인지 확인해 주세요.

_pages/ms_MY/finalizing-setup.txt

@@ -55,15 +55,6 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Muat turun [fail ini](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Reinsert your SD card into your device
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + Jika terdapat error, set DNS settings anda ke "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/ms_MY/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "Panduan 3DS" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Bermula" #
   cta_url: "/ms_MY/get-started" #

_pages/ms_MY/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ms_MY/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Launch GodMode9 by pressing (A)
-1. Navigate to `[0:] SDCARD`
+1. Navigate to `[0:] SDCARD` -> `gm9out`
-1. Press (A) on your NAND `.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
+1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
 1. Press (A) to unlock SysNAND overwriting, then input the key combo given
   + This will not overwrite your boot9strap installation
 1. Input the key combo given to unlock SysNAND (lvl1) writing
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/ms_MY/troubleshooting.txt

@@ -122,6 +122,26 @@ Exploitasi berdasarkan browser (seperti browserhax atau 2xrsa) kebiasaannya tida
     1. If you enter safe mode, update your device
 1. Your device may be bricked. For support, ask for help at [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Launch GodMode9 by pressing (A)
+1. Navigate to `[0:] SDCARD` -> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Press (A) to unlock SysNAND overwriting, then input the key combo given
+  + This will not overwrite your boot9strap installation
+1. Input the key combo given to unlock SysNAND (lvl1) writing
+  + This process will take some time
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Pastikan anda mempunyai payload yang berfungsi.

_pages/nl_NL/finalizing-setup.txt

@@ -55,15 +55,6 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  Download [dit bestand](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Stop je SD kaart terug in je 3DS
 1. Zet je 3DS aan
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Updates while using B9S + Luma (what you have) are safe
   + Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI
 

_pages/nl_NL/home.txt

@@ -3,7 +3,7 @@ layout: splash
 title: "3DS Handleiding" #
 header:
   overlay_color: "#5e616c" #
-  overlay_image: images/home-page-feature.jpg
+  overlay_image: /images/home-page-feature.jpg
   overlay_filter: 0.5
   cta_label: "Begin" #
   cta_url: "/nl_NL/get-started" #

_pages/nl_NL/installing-boot9strap-(dsiware-game-injection).txt

@@ -94,7 +94,6 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + If your game has an error about corrupted or inaccessible save data, confirm that you copied **the contents of** the `savedata` folder and not the `savedata` folder itself
   + If your game behaves normally and does not give you an error about `boot.nds`, then you should stop and figure out what went wrong
   + If you get a black screen, [follow this troubleshooting guide](troubleshooting#twl_broken)
-  + If the game is missing from **the target 3DS** or has an error about corrupted or inaccessible save data, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 
 ##### Section III - System Transfer
 
@@ -121,8 +120,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Open GodMode9 door op (A) te drukken
-1. Navigeer naar `[0:] SDCARD`
+1. Navigeer naar `[0:] SDCARD`-> `gm9out`
-1. Druk op (A) op je `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
+1. Druk op (A) op `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
 1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
   + This will not overwrite your boot9strap installation
 1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
@@ -139,12 +138,11 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
 1. Copy the 11.4.0 `.firm` corresponding to **the target 3DS** to the `boot9strap` folder on the root of **the target 3DS**'s SD card
 1. Copy `boot9strap.firm` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
 1. Launch b9sTool by starting your DSiWare game on **the target 3DS**
-  + If the game does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
+  + If the game is missing or does not launch b9sTool, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/nl_NL/installing-boot9strap-(dsiware-save-injection).txt

@@ -127,8 +127,8 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
     + You can also just [remove the NNID](https://3ds.guide/troubleshooting#rm_nnid) from **the source 3DS** if you'd prefer it remain on **the target 3DS**
 1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
 1. Open GodMode9 door op (A) te drukken
-1. Navigeer naar `[0:] SDCARD`
+1. Navigeer naar `[0:] SDCARD`-> `gm9out`
-1. Druk op (A) op je `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
+1. Druk op (A) op `nand.bin` om het te selecteren, selecteer vervolgens "NAND image options...", en selecteer dan "Restore SysNAND (safe)"
 1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
   + This will not overwrite your boot9strap installation
 1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
@@ -152,10 +152,9 @@ Use a [save manager](https://github.com/J-D-K/JKSM/releases/latest) to backup an
   + **The Legend of Zelda: Four Swords**: Just start the game
   + If your game does not have the hacked save file installed, [follow this troubleshooting guide](troubleshooting#ts_dsiware)
 1. Select "Dump F0F1" to backup **the target 3DS**'s FIRM
-1. Make note of the FIRM backup's location
 1. Exit b9sTool
   + You may have to force power off by holding the power button
-1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
+1. Put your SD card in your computer, then copy `F0F1_N3DS.bin` or `F0F1_O3DS.bin` (depending on your device) from the `boot9strap` folder to a safe location; make backups in multiple locations; this backup will save you from a brick if anything goes wrong
 1. Reinsert your SD card into **the target 3DS**
 
 ##### Section VI - Flashing the target 3DS's FIRM

_pages/nl_NL/troubleshooting.txt

@@ -122,6 +122,26 @@ Op de browser gebaseerde exploits (zoals browserhax or 2xrsa) zijn vaak erg onst
     1. If you enter safe mode, update your device
 1. Je 3DS is misschien gebricked. Voor support, vraag om hulp op [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp)
 
+## <a name="ts_dsiware" />After doing the DSiWare Transfer, my hacked DSiWare does not work
+
+1. Reboot **the source 3DS** while holding (Start) to launch the Luma3DS chainloader menu
+1. Open GodMode9 door op (A) te drukken
+1. Navigeer naar `[0:] SDCARD`-> `gm9out`
+1. Press (A) on `nand.bin` to select it, then select "NAND image options…", then select "Restore SysNAND (safe)"
+1. Druk op (A) om SysNAND overwriting te ontgrendelen en voer daarna de toetsencombinatie in die wordt gegeven
+  + This will not overwrite your boot9strap installation
+1. Voer de gegeven combinatie van knoppen in om SysNAND (lvl1) writing in te schakelen
+  + Dit proces zal enige tijd duren
+1. Once it has completed, press (A) to continue
+1. If you don't see the game at all on **the target 3DS**, link the NNID you bought the game with to **the target 3DS** and redownload it
+  + You may have to delete the game from "Data Management" in the "System Settings" first
+  + If **the target 3DS** is not the latest version, you may have to run ctr-httpwn to access the eShop
+1. On **the source 3DS**, do the the save (and `.app` if you are using the `.app` page) injection steps
+1. On **the source 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to your SD card
+1. Either put **the source 3DS**'s SD card in **the target 3DS**, or rename the `Nintendo 3DS` on **the target 3DS**'s SD card and copy the `Nintendo 3DS` folder from **the source 3DS**'s SD card to **the target 3DS**'s SD card
+1. On **the target 3DS**, go to System Settings, "Data Management", "DSiWare", then copy your DSiWare game to the system
+1. Return your SD cards to normal, then continue with the DSiWare Injection
+
 ## <a name="ts_sys_b9s" />Black screen on SysNAND boot after Installing boot9strap
 
 1. Zorg er voor dat je een werkende payload hebt.

_pages/no_NO/finalizing-setup.txt

@@ -55,15 +55,6 @@ Under denne prossesen, vil vi også sette opp program som følgende:
     ![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
     {: .notice--info}
 
-1. If your device is on a version below 9.0.0, your device will not boot unless you use an alternative version of Luma3DS:
-  + Download [a legacy version of Luma3DS]({{ base_path }}/luma_legacy/boot.firm)
-  + Copy `boot.firm` to the root of your SD card *(overwrite existing files)*
-  + Replace this `boot.firm` with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) after updating your device later in these instructions
-1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
-  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `native.firm`
-  + Last ned [denne filen](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
-  + Copy `native.firm` and `cetk` to the `/luma/` folder on your SD card
-  + Delete both of these files after updating your device later in these instructions
 1. Sett inn SD-kortet i konsollen igjen
 1. Power on your device
 
@@ -79,8 +70,6 @@ If, before following this guide, you already had an EmuNAND setup and would like
   + Oppdateringer mens du bruker B9S + Luma (det du har) er trygt
   + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
   + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
-1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
 
 ##### Section III - Launching FBI