treewide: further markdown fixing
- Newlines must be placed around the images to make sizing consistent. - Added newline to all pages - Fixed list rendering in some sections
This commit is contained in:
lifehackerhansol
parent
6f6137676c
commit
e41355d482
39 changed files with 351 additions and 64 deletions
|
|
@ -47,16 +47,20 @@ Make sure that the console is close to the computer running the exploit, ideally
|
|||
1. Go to `Wii Settings`.
|
||||
1. Take note in the top right corner of the letter next to the system version.
|
||||
+ This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
|
||||
|
||||
|
||||
|
||||
1. Power off your console.
|
||||
1. Start your Linux distro, and ensure you are connected to the internet.
|
||||
1. Open the Terminal
|
||||
1. Run the following commands:
|
||||
|
||||
```bash
|
||||
wget https://wii.guide/assets/files/bluebomb-helper.sh
|
||||
chmod +x bluebomb-helper.sh
|
||||
./bluebomb-helper.sh
|
||||
```
|
||||
|
||||
1. The helper will then download the required files, and ask for information about your console.
|
||||
+ If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (`U` for **USA** and `E` for **PAL** models).
|
||||
+ If you have selected a Wii you will be asked to provide your Wii Menu Version (What you determined in step 4)
|
||||
|
|
|
|||
|
|
@ -33,17 +33,26 @@ If you have BootMii installed as boot2 you will need to launch BootMii by restar
|
|||
1. Power on your console.
|
||||
1. Launch the Homebrew Channel.
|
||||
1. Press the HOME Button, then select "Launch BootMii".
|
||||
|
||||
|
||||
|
||||
1. Select the Options button (the icon with the gears).
|
||||
|
||||
|
||||
|
||||
1. Select the first button to the left.
|
||||
+ A NAND backup will start. You can watch the progress on the screen.
|
||||
|
||||
+ "Bad Blocks" are normal, and mostly originate from the factory due to NAND binning. Don't worry when you see some on a NAND backup.
|
||||
+ After this step, it will verify the backup. Ideally, all the blocks should be green after the verification process.
|
||||
|
||||
|
||||
|
||||
1. When the process is complete, exit the NAND backup screen by pressing any button.
|
||||
|
||||
|
||||
|
||||
1. Press the Back button (the one with an arrow), then press either the Wii Menu button or the Homebrew Channel button to exit BootMii.
|
||||
|
||||
|
||||
|
||||
<div id="restore-notice" class="notice" markdown="1">
|
||||
|
|
|
|||
|
|
@ -44,9 +44,13 @@ If you want to restore a game's save data, use Dolphin to import your NAND backu
|
|||
1. Launch the Homebrew Channel.
|
||||
1. Press the HOME Button, then select "Launch BootMii".
|
||||
1. Select the Options button (the icon with the gears).
|
||||
|
||||
|
||||
|
||||
1. Select the RestoreMii button.
|
||||
|
||||
|
||||
|
||||
1. If BootMii is installed as IOS, input the Konami code on your GameCube controller: ↑, ↑, ↓, ↓, ←, →, ←, →, B, A, START
|
||||
1. After the recovery ended, you should see a text say `I HAZ SUCCESS!`, otherwise `I HAZ FAIL`. Hit any button on your Wii console or GCN controller.
|
||||
|
||||
|
|
@ -54,4 +58,4 @@ If you were restoring a NAND backup in order to repair a brick and this did not
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -70,6 +70,7 @@ When navigating to Wii Settings, you instead get an error from the Opera web bro
|
|||
|
||||
#### Cause
|
||||
A semibrick occurs when a different region Wii Menu or a different region custom theme is installed. As the Wii Settings menu is rendered using HTML pages with Opera, themes often replace these pages and put them in different directories; essentially leading to a `404 Not Found` error but in the form of a console brick.
|
||||
|
||||
|
||||
|
||||
#### Solutions
|
||||
|
|
@ -88,6 +89,7 @@ If you are actually in the process of a region change, use [ARC-ME](https://gith
|
|||
|
||||
#### Symptoms
|
||||
Attempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. This happened after installing a WAD and rebooting, or returning to the Wii Menu. Alternatively, the Wii Menu can still be accessed, but opening the corrupt channel results in the console freezing. In some cases, you may see the "System files are corrupted" screen.
|
||||
|
||||
|
||||
|
||||
#### Cause
|
||||
|
|
@ -134,6 +136,7 @@ When starting the Wii, you instead get an error from the Opera web browser along
|
|||
This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF gets corrupt or damaged, the Wii will regenerate it and start the setup phase.
|
||||
|
||||
However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region Wii Menu or theme, the Wii cannot find them.
|
||||
|
||||
|
||||
|
||||
#### Solutions
|
||||
|
|
@ -151,6 +154,7 @@ Screen shows up as listed below on normal boot.
|
|||
|
||||
`Error:003`<br>
|
||||
`unauthorized device has been detected.`<br>
|
||||
|
||||
|
||||
|
||||
#### Cause
|
||||
|
|
@ -216,4 +220,4 @@ First, troubleshooting must be done to determine if hardware is at fault. In the
|
|||
+ At this point, either there is a low level boot0/boot1 corruption, a NAND chip failure, or there is a wider unknown hardware failure. Consider consulting online help or buying another Wii.
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -62,4 +62,4 @@ The Wii and Wii mini consoles are only known to work with Ethernet adapters usin
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -65,38 +65,49 @@ On each cIOS that you try to install, you will first be shown a grid of active I
|
|||
+ This should work in nearly all cases.
|
||||
1. Now, you will install individual cIOS from 248-251. The exact settings needed are listed below.
|
||||
+ cIOS 248 Installation
|
||||
|
||||
```
|
||||
Select cIOS <d2x-v11-beta1>
|
||||
Select cIOS base <38>
|
||||
Select cIOS slot <248>
|
||||
Select cIOS version <65535>
|
||||
```
|
||||
|
||||
|
||||
|
||||
+ cIOS 249 Installation
|
||||
|
||||
```
|
||||
Select cIOS <d2x-v11-beta1>
|
||||
Select cIOS base <56>
|
||||
Select cIOS slot <249>
|
||||
Select cIOS version <65535>
|
||||
```
|
||||
|
||||
|
||||
|
||||
+ cIOS 250 Installation
|
||||
|
||||
```
|
||||
Select cIOS <d2x-v11-beta1>
|
||||
Select cIOS base <57>
|
||||
Select cIOS slot <250>
|
||||
Select cIOS version <65535>
|
||||
```
|
||||
|
||||
|
||||
|
||||
+ cIOS 251 Installation
|
||||
|
||||
```
|
||||
Select cIOS <d2x-v11-beta1>
|
||||
Select cIOS base <58>
|
||||
Select cIOS slot <251>
|
||||
Select cIOS version <65535>
|
||||
```
|
||||
|
||||
|
||||
|
||||
[Continue to Recommended Homebrew](recommended-homebrew)<br>
|
||||
This guide outlines selections of homebrew that we think are useful to have; these range from utilities to emulators and more.
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -13,4 +13,4 @@ title: "Donations"
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -26,7 +26,9 @@ If you are dumping one of the 13 games on [this list](https://wiki.dolphin-emu.o
|
|||
1. Launch the Homebrew Channel.
|
||||
1. Launch CleanRip from the list of homebrew.
|
||||
1. Select your device that you will be dumping the game to - a USB device or SD card.
|
||||
|
||||
|
||||
|
||||
1. When prompted, select `Yes` to download the redump.org DAT files.
|
||||
+ This is required to ensure that the resulting dumps are clean/accurate.
|
||||
|
||||
|
|
@ -34,13 +36,20 @@ If you are dumping one of the 13 games on [this list](https://wiki.dolphin-emu.o
|
|||
{: .notice--warning}
|
||||
|
||||
|
||||
|
||||
1. Insert the game disc you would like to dump.
|
||||
|
||||
|
||||
|
||||
1. Set the settings as shown on the screen below, while verifying if your game disc is dual layer or not.
|
||||
|
||||
|
||||
|
||||
1. Press A to start dumping the disc.
|
||||
+ This process can take quite some time, since it will dump the full 4.7 GB disc contents (8.5 GB for dual layer discs).
|
||||
|
||||
|
||||
|
||||
1. Proceed to [joining PART files](dump-games#joining-part-files-on-a-fat32-device).
|
||||
|
||||
### Dumping a Disc over LAN (Wii DVD Dumper)
|
||||
|
|
@ -65,16 +74,21 @@ Your Wii and your computer must be connected to the same local network.
|
|||
1. Launch DVD Dump Tool from the list of homebrew.
|
||||
1. Press right on the D-pad, then press A.
|
||||
1. Choose the disc that you want to copy (The options are: `GameCube Disc`, `Wii Single-Layer Disc`, `Wii Dual-Layer Disc`) and press "A"
|
||||
|
||||
|
||||
1. Insert the game disc into your Wii.
|
||||
+ If it is already inserted, eject and reinsert the disc.
|
||||
|
||||
|
||||
1. Select the proper disc type.
|
||||
|
||||
|
||||
1. Press any button to begin the dumping process.
|
||||
|
||||
|
||||
1. Remember or write down your Wii's URL (IP address).
|
||||
1. On your computer, open the browser, go to your address bar and enter the Wii URL.
|
||||
|
||||
|
||||
1. Click on `Click here to download XXXX.iso`.
|
||||
1. Proceed to [joining PART files](dump-games#joining-part-files-on-a-fat32-device).
|
||||
|
|
@ -103,4 +117,4 @@ If you dumped the disc (regardless if it was to a PC or Wii) on a FAT32 formatte
|
|||
1. Wait until the merging process finishes.
|
||||
|
||||
To organize the games on your drive properly, you can use [Wii Backup Manager](wiibackupmanager).
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -20,15 +20,22 @@ This guide will show you how to dump WADs from your Wii System Memory.
|
|||
1. Launch the Homebrew Channel.
|
||||
1. Launch Yet Another BlueDump MOD from the list of homebrew.
|
||||
1. Press A.
|
||||
|
||||
|
||||
|
||||
1. Select `Installed Channel Titles`.
|
||||
|
||||
|
||||
|
||||
1. Find the content you want to dump and press the 1 Button.
|
||||
|
||||
|
||||
|
||||
1. Select `Backup to WAD`.
|
||||
1. At the prompt to `Fakesign the ticket`, select `Yes`.
|
||||
1. At the prompt to `Fakesign the TMD`, select `No`.
|
||||
1. At the prompt to `Change the output WAD region`, select `No`.
|
||||
|
||||
The WAD has now been dumped, and should appear at the specified directory on your SD card.
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ title: "FAQ and Troubleshooting"
|
|||
|
||||
### What are the limitations in vWii modding?
|
||||
The following is a list of things that can potentially **BRICK** your vWii (don't do these things!):
|
||||
|
||||
* Installing IOS for a Wii console on vWii.
|
||||
* Installing Wii menu themes not formatted correctly for vWii and/or your region.
|
||||
* Installing BootMii.
|
||||
|
|
@ -56,4 +57,4 @@ If you get error FORE000006, your Wii's clock is probably set incorrectly. See [
|
|||
The [mkey generator](https://mkey.salthax.org) can generate the code required to remove parental controls.
|
||||
|
||||
### I think my Wii is bricked, or something is seriously wrong, what do I do?
|
||||
See [this](bricks) page.
|
||||
See [this](bricks) page.
|
||||
|
|
|
|||
|
|
@ -17,20 +17,28 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann
|
|||
|
||||
1. Power on your console.
|
||||
1. Launch the Internet Channel.
|
||||
|
||||
|
||||
|
||||
1. Go to `flashhax.com`.
|
||||
1. Select the correct region for your console.
|
||||
|
||||
|
||||
|
||||
1. Press the star button to open the bookmark tab.
|
||||
1. Select `Add Favorite`.
|
||||
|
||||
|
||||
|
||||
|
||||
#### Section II - FlashHax
|
||||
|
||||
1. Open the site from the bookmark
|
||||
1. Wait a while
|
||||
+ It may take some time as it is downloading the installer over the Internet.
|
||||
|
||||
|
||||
|
||||
1. If the exploit was successful, your device will have loaded the HackMii Installer.
|
||||
+ This may take multiple tries.
|
||||
+ If the HackMii Installer doesn't load and it instead freezes (you can't move your cursor), restart your Wii, launch the Internet Channel, then retry this section.
|
||||
|
|
|
|||
|
|
@ -35,4 +35,4 @@ Selecting `Install Game (Scrub)` will remove unnecessary data from the game, red
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -37,13 +37,21 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
|
||||
1. Insert your physical memory card into Slot A or Slot B.
|
||||
1. Select the device you want to restore from.
|
||||
|
||||
|
||||
|
||||
1. In GCMM, Press X on a GameCube controller or + on a Wii remote.
|
||||
|
||||
|
||||
|
||||
1. Select the slot your memory card is in.
|
||||
|
||||
|
||||
|
||||
1. Select the save you want to restore. If you have multiple saves to restore, you can press R on the GameCube controller or 1 on the Wii remote to restore all of your saves.
|
||||
|
||||
|
||||
|
||||
1. When restoration is complete, press any button to continue.
|
||||
|
||||
## Backing Up A Save (.gci File) to an SD or USB From a Physical Memory Card
|
||||
|
|
@ -66,13 +74,21 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
|
||||
1. Insert your physical memory card into slot A or slot B.
|
||||
1. Select the device you want to backup to.
|
||||
|
||||
|
||||
|
||||
1. In GCMM, Press Y on a GameCube controller or - on a Wii remote.
|
||||
|
||||
|
||||
|
||||
1. Select the slot your memory card is in.
|
||||
|
||||
|
||||
|
||||
1. Select the save you want to backup. If you have multiple saves to backup, you can press R on the GameCube controller or 1 on the Wii remote to backup all of your saves.
|
||||
|
||||
|
||||
|
||||
1. When backing up is complete, press any button to continue.
|
||||
|
||||
## Backing Up Your Physical Memory Card Into an Emulated Memory Card (.raw file)
|
||||
|
|
@ -94,9 +110,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
|
||||
1. Insert your memory card into Slot A or Slot B.
|
||||
1. Select the device you want to dump to.
|
||||
|
||||
|
||||
|
||||
1. Press L and Y at the same time on GameCube Controller or B and - at the same time on the Wii remote to backup your to a .raw file and select the slot your memory card is in.
|
||||
|
||||
|
||||
|
||||
1. When the dump is complete, press any button to continue. It should be saved in a folder on the root of your SD or USB called `MCBACKUP`.
|
||||
|
||||
## Restoring an Emulated Memory Save to a Physical Memory Card
|
||||
|
|
@ -113,10 +133,14 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
1. If you are restoring a Nintendont emulated memory card save, navigate to the `saves` folder on the root of your SD card or USB.
|
||||
1. Insert your memory card into Slot A or Slot B.
|
||||
1. Select the device you want to restore from.
|
||||
|
||||
|
||||
|
||||
1. Press L and X at the same time on GameCube controller or B and + at the same time on the Wii remote.
|
||||
1. Select the slot your memory card is in.
|
||||
|
||||
|
||||
|
||||
1. It should restore the .raw file to your memory card. When restoration is complete, press any button to continue.
|
||||
|
||||
## Transferring Saves Between 2 Physical Memory Cards
|
||||
|
|
@ -130,6 +154,7 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
|
||||
1. Insert both memory cards into the Wii.
|
||||
1. From the System menu, navigate into `Wii Options`, `Data Management`, `Save Data`, `Nintendo GameCube`.
|
||||
|
||||
 <br>
|
||||
|
||||
 <br>
|
||||
|
|
@ -141,4 +166,4 @@ If you are looking for save game exploits for booting into [Swiss](https://githu
|
|||
1. Find the save you want, select it and select `Move or Copy`.
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -14,11 +14,15 @@ While it is possible to install BootMii on a Wii mini, you will need to solder a
|
|||
{: .notice--info}
|
||||
|
||||
1. You will see a scam warning screen. Wait 30 seconds for the text "Press 1 to continue" to appear, then press 1.
|
||||
|
||||
|
||||
|
||||
1. Press `Continue`, then select `Install The Homebrew Channel`.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `Continue` when finished.
|
||||
1. Once done, select `Exit` to exit the HackMii installer.
|
||||
|
||||
|
|
|
|||
|
|
@ -18,24 +18,41 @@ You can always [install it at a later date](hackmii).
|
|||
|
||||
1. Your console should be powered on and showing the HackMii Installer from the previous part of the guide.
|
||||
+ You will see a scam warning screen.
|
||||
|
||||
|
||||
|
||||
1. Wait 30 seconds for the text "Press 1 to continue" to appear, then press 1.
|
||||
1. Select `Continue`.
|
||||
|
||||
|
||||
|
||||
1. Select `Install the Homebrew Channel`.
|
||||
|
||||
|
||||
|
||||
1. Once it is completed, select `Continue`.
|
||||
|
||||
|
||||
|
||||
1. Select `Back`, then select `BootMii`.
|
||||
|
||||
|
||||
|
||||
1. Select `Install BootMii as IOS`.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Once it is completed, select `Continue`.
|
||||
1. If you have the option to `Install BootMii as boot2`, please do so as well.
|
||||
|
||||
|
||||
|
||||
1. Select `Exit`
|
||||
1. Your console will have booted into the Homebrew Channel.
|
||||
|
||||
|
|
|
|||
|
|
@ -15,12 +15,17 @@ On Dolphin Emulator version `5.0-4588` or later, the Wii Menu can be easily inst
|
|||
### Instructions
|
||||
|
||||
1. If you have not already done so, install the Wii Menu on Dolphin Emulator by going to `Tools > Perform System Update`.
|
||||
|
||||
|
||||
|
||||
1. Download `Open_HBC_(version)_LULZ.wad` from the page linked above.
|
||||
1. Open Dolphin Emulator.
|
||||
1. Select `Tools > Install WAD` and select the `Open_HBC_(version)_LULZ.wad` file that was downloaded.
|
||||
|
||||
|
||||
|
||||
1. Select `Tools > Load Wii System Menu`. The channel should now appear.
|
||||
|
||||
|
||||
|
||||
### Post-Installation, installing Homebrew Apps through Open Shop Channel
|
||||
|
|
@ -30,6 +35,9 @@ On Dolphin Emulator version `5.0-4588` or later, the Wii Menu can be easily inst
|
|||
1. Enable `Automatically Sync with Folder`. Optionally, you may also want to adjust the `SD Card File Size` to a larger parameter - however in most cases `Auto` should be fine.
|
||||
1. Open the `SD Sync Folder`. On Windows, this can easily be done by pasting the folder path into the Start Menu, Windows Explorer, or Run.
|
||||
1. Extract any homebrew apps to the `WiiSDSync` folder. The end result should look something like this:
|
||||
|
||||
|
||||
|
||||
1. Load the Wii Menu and open the Homebrew Channel. Your newly installed apps should appear!
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -80,4 +80,4 @@ This page lays out different exploits that were used, or can still be used on th
|
|||
+ Executes the chainloader via a web page in the Internet Channel
|
||||
+ Works regardless of system menu version, only requirement is patience as exploit is extremely unreliable
|
||||
+ Superceded by str2hax, or by using an SD card for Letterbomb
|
||||
+ [Wiibrew Page](https://wiibrew.org/wiki/Flashhax) or [Exploit Page](flashhax)
|
||||
+ [Wiibrew Page](https://wiibrew.org/wiki/Flashhax) or [Exploit Page](flashhax)
|
||||
|
|
|
|||
|
|
@ -24,15 +24,21 @@ LetterBomb is an exploit for the Wii that is triggered using the Wii Message Boa
|
|||
1. Take note in the top right corner of the letter next to the system version.
|
||||
+ This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
|
||||
+ Also, ensure that you are on System Menu version 4.3.
|
||||
|
||||
|
||||
|
||||
1. Navigate to `Internet` > `Console Information`.
|
||||
1. Take note of your FULL MAC address.
|
||||
|
||||
|
||||
|
||||
1. On your computer, open the browser and go to [the HackMii website](https://please.hackmii.com/).
|
||||
1. Input your Wii MAC address and region.
|
||||
1. Ensure `Bundle the HackMii Installer for me!` is checked.
|
||||
1. Cut either wire.
|
||||
|
||||
|
||||
|
||||
1. Insert your SD card into your computer.
|
||||
1. Copy the `private` folder and the `boot.elf` file from the LetterBomb `.zip` to the root of your SD card.
|
||||
1. Reinsert your SD card into your console.
|
||||
|
|
|
|||
|
|
@ -123,4 +123,4 @@ When following one of the exploit guides above, please avoid replacing the `boot
|
|||
</details>
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -83,4 +83,4 @@ Most commonly used combo with default HID settings:<br>
|
|||
Shutdown: L+R+Z+Start
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -22,7 +22,9 @@ There are two methods to use the Open Shop Channel - on your Wii through the Hom
|
|||
#### Instructions
|
||||
|
||||
1. Download the reccomended `.zip` file from the Open Shop Channel website.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Extract the `apps` folder in the archive to the root of your SD card or USB drive. Optionally, the archive also comes with a guide on how to use the Homebrew Browser.
|
||||
1. Insert your SD card or USB drive into your Wii, and go to the Homebrew Channel. The Homebrew Browser should now display.
|
||||
|
||||
|
|
@ -37,12 +39,18 @@ There are two methods to use the Open Shop Channel - on your Wii through the Hom
|
|||
#### Instructions for Windows
|
||||
|
||||
1. Download `oscdl-installer.exe` and run the installer. Optionally, you may instead download `oscdl-standalone.exe`, which does not have to be installed and instead runs as a portable executable.
|
||||
|
||||
|
||||
|
||||
|
||||
1. If you get a User Account Control pop-up that asks whether or not you would like the program to make changes to your PC, select yes. Open Shop Channel is a safe application.
|
||||
1. Let the installer run, and then launch OSCDL once the process is finished.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Find an application that you would like to get, and press the Download button. Optionally, you can also send the app directly to your Wii - this requires both your computer and Wii to be on the same network.
|
||||
|
||||
|
||||
|
||||
|
||||
1. A `.zip` file containing your app should download wherever you specified the directory to be. Simply extract the `apps` folder in this archive to the root of your SD card or USB drive.
|
||||
1. Insert your SD card or USB drive into your Wii, and go to the Homebrew Channel. Your downloaded piece of homebrew should now display.
|
||||
|
||||
|
|
@ -62,4 +70,4 @@ This guide provides installation instructions for cIOS on Wii minis.
|
|||
{: .notice--info}
|
||||
|
||||
[Return to site index](site-navigation)<br>
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -39,16 +39,21 @@ There are some important things to take note of:
|
|||
1. Launch the Homebrew Channel.
|
||||
1. Launch Priiloader installer from the list of homebrew.
|
||||
1. Press the + Button on Wii Remote or the A Button on a GameCube controller.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press A to return to the Homebrew Channel.
|
||||
|
||||
#### Section III - Entering Priiloader
|
||||
|
||||
Priiloader will appear automatically after you install it. Simply exit the Homebrew Channel, and you should see the Priiloader menu:
|
||||
|
||||
|
||||
|
||||
|
||||
To enter it later on, simply run the "Load Priiloader" homebrew app. There are also other ways to enter Priiloader:
|
||||
|
||||
+ Holding RESET on a Wii while turning it on.
|
||||
+ Holding the ESC key on a USB keyboard while turning on the console.
|
||||
|
||||
|
|
@ -59,6 +64,7 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
|||
1. Launch the Homebrew Channel.
|
||||
1. Launch Load Priiloader from the list of homebrew.
|
||||
1. Scroll down to `System Menu Hacks` and press `A`.
|
||||
|
||||
|
||||
|
||||
If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time. <br>
|
||||
|
|
@ -67,7 +73,9 @@ To enter it later on, simply run the "Load Priiloader" homebrew app. There are a
|
|||
|
||||
1. Press `A` on each hack you would like to enable.
|
||||
+ This guide advises you to enable "Block Disc Updates", "Block Online Updates", and "Region Free EVERYTHING".
|
||||
|
||||
|
||||
|
||||
1. Scroll down to `save settings` and press A.
|
||||
1. Press `B` to return to the main menu.
|
||||
|
||||
|
|
@ -133,17 +141,28 @@ You will be installing `uneoboot.dol` in step 3.
|
|||
1. Launch the Homebrew Channel
|
||||
1. Launch Load Priiloader from the list of homebrew.
|
||||
1. Scroll down to `Load/Install file` and press A.
|
||||
|
||||
|
||||
|
||||
1. Scroll through the menu until your desired homebrew app is highlighted, and press A to install it.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `B` to return to the main menu.
|
||||
1. Scroll down to `Settings` and press A.
|
||||
|
||||
|
||||
|
||||
1. Press Right to cycle through the Autoboot options until `Installed file` is selected.
|
||||
|
||||
|
||||
|
||||
1. Scroll down to `save settings` and press A.
|
||||
|
||||
|
||||
|
||||
1. Press `B` to return to the main menu.
|
||||
1. Scroll back up to `System Menu` and press A.
|
||||
|
||||
|
|
@ -154,7 +173,9 @@ Your Wii should now automatically boot to whichever homebrew app you installed.
|
|||
1. Launch the Homebrew Channel
|
||||
1. Launch Load Priiloader from the list of homebrew.
|
||||
1. Scroll down to `Settings` and press A.
|
||||
|
||||
|
||||
|
||||
1. Press Right to cycle through the Autoboot options until your desired option is selected.
|
||||
+ Disabled` will autoboot to the Priiloader menu.
|
||||
|
||||
|
|
@ -162,8 +183,11 @@ Your Wii should now automatically boot to whichever homebrew app you installed.
|
|||
{: .notice--warning}
|
||||
|
||||
|
||||
|
||||
1. Scroll down to `save settings` and press A.
|
||||
|
||||
|
||||
|
||||
1. Press `B` to return to the main menu.
|
||||
1. Scroll back up to `System Menu` and press A.
|
||||
|
||||
|
|
|
|||
|
|
@ -55,4 +55,4 @@ Homebrew that has the ability to make permanant changes to your Wii are highligh
|
|||
|
||||
[Continue to WiiConnect24](wiiconnect24)<br>
|
||||
WiiConnect24 was originally discontinued in June of 2013, but as of the present, there are now two different services that restore its functionality in several different applications.
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -41,4 +41,4 @@ Under Construction
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -36,26 +36,47 @@ If you are on vWii, you will also need [Priiloader](priiloader) installed with t
|
|||
+ On Windows run `RiiConnect24Patcher.bat`.
|
||||
+ On macOS/Linux systems, open Terminal and type `bash`, then drag `RiiConnect24Patcher.sh` into the terminal then press enter. It should look like this: `bash <directory>/<directory>/RiiConnect24Patcher.sh`.
|
||||
1. Press 1 to choose "`Start`" and confirm your selection by pressing `ENTER`.
|
||||
|
||||
|
||||
|
||||
1. Select the device you're patching for.
|
||||
|
||||
|
||||
|
||||
1. For this guide, choose "`Install RiiConnect24 on your Wii`"
|
||||
|
||||
|
||||
|
||||
1. Choose "`Express (Recommended)`". It will give you everything you need.
|
||||
|
||||
|
||||
|
||||
1. Select your region.
|
||||
|
||||
|
||||
|
||||
1. While you're at it, RiiConnect24 Patcher can additionally download some other optional channels that do not use RiiConnect24. `[X]` represents the options that selected. Just press 5 and `ENTER` if you're not interested.
|
||||
|
||||
|
||||
|
||||
1. Connect your SD Card or USB Drive to your computer and select "`1`".
|
||||
|
||||
|
||||
|
||||
1. If your device was detected successfully, select "`1`". If not, make sure there's a folder called `apps` on your SD Card or USB Drive and try again.
|
||||
|
||||
|
||||
|
||||
1. The patcher will download apps now - please be patient.
|
||||
|
||||
|
||||
|
||||
1. Once you reach the screen that says `Patching done`, you can exit the patcher. All the files should already be on your SD card.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. If it did not copy everything automatically to your SD Card or USB Device, copy the `WAD` and `apps` folder next to `RiiConnect24Patcher.bat` or `RiiConnect24Patcher.sh` to your SD Card or USB Device.
|
||||
|
||||
#### Section II - Installing WADs
|
||||
|
|
@ -116,4 +137,4 @@ You will now set your DNS to RiiConnect24 servers. This is optional but recommen
|
|||
{: .notice--info}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -60,4 +60,4 @@ Do not get confused with the actual Riivolution app, and the Riivolution folder
|
|||
</details>
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -65,4 +65,4 @@ If you're not receiving updates after a few days, you might need to subscribe to
|
|||
1. Launch RSSMii Remover from the Homebrew Channel. It will remove your subscriptions to the RSS feeds.
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -75,4 +75,4 @@ sitemap: false
|
|||
+ [Installing the Homebrew Channel on the Wii mini](hbc-mini)
|
||||
+ [Installing cIOS on the Wii mini](cios-mini)
|
||||
{% endcapture %}
|
||||
<div class="notice--primary">{{ notice-6 | markdownify }}</div>
|
||||
<div class="notice--primary">{{ notice-6 | markdownify }}</div>
|
||||
|
|
|
|||
|
|
@ -32,28 +32,46 @@ This exploit requires you to set your DNS in order to connect to a server that c
|
|||
|
||||
1. Power on your console.
|
||||
1. Go to `Wii Options`.
|
||||
|
||||
|
||||
|
||||
1. Go to `Wii Settings`.
|
||||
|
||||
|
||||
|
||||
1. Navigate to `Page 2` -> `Internet` -> `Connection Settings`.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Click on your network connection slot and navigate to `Change Settings`.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
1. Set `Auto-Obtain DNS` to `No`, then click `Advanced Settings`.
|
||||
|
||||
|
||||
|
||||
1. Set the Primary DNS to `18.188.135.9`.
|
||||
|
||||
|
||||
|
||||
If there are 3 fields instead of 2 (like above), go back and make sure you are on the `Auto-Obtain DNS` page.
|
||||
{: .notice--warning}
|
||||
|
||||
1. Click `Confirm`, then click `Save`.
|
||||
|
||||
|
||||
|
||||
1. When prompted, click `OK` to perform the connection test.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
+ If the connection test was successful, select `No` to skip the Wii System Update.
|
||||
+ If it fails with error code `521xx`, please verify that you have entered the DNS correctly.
|
||||
+ If it is still unsuccessful, please [use another exploit](get-started).
|
||||
|
|
@ -64,9 +82,12 @@ This exploit requires you to set your DNS in order to connect to a server that c
|
|||
1. Select `Yes`.
|
||||
1. Click on `Next`.
|
||||
+ You should be greeted with the following screen:
|
||||
|
||||
|
||||
|
||||
1. Give the exploit 1-2 minutes to download (and don't press `I ACCEPT`/`I DO NOT ACCEPT`).
|
||||
1. If the exploit was successful, your device will have loaded the HackMii Installer.
|
||||
|
||||
|
||||
|
||||
[Continue to Homebrew Channel and BootMii Installation](hbc)
|
||||
|
|
|
|||
|
|
@ -21,11 +21,15 @@ A SysCheck lists all the IOS and cIOS that are on your Wii, along with some info
|
|||
|
||||
1. Wait for the program to get some information about your Wii.
|
||||
1. When "This IOS will be tested (Please select)" is shown on the screen, press A.
|
||||
|
||||
|
||||
|
||||
1. Wait for the program to get some information about your IOS.
|
||||
1. After it finishes, press the `A` Button if you want to view the log.
|
||||
|
||||
|
||||
|
||||
1. If you want to share the SysCheck, you can press the `A` Button, which will upload it to [syscheck.rc24.xyz](http://syscheck.rc24.xyz/) and give you a link. You can also share the `sysCheck.csv` saved to the root of your SD Card or USB Drive. The `IOSsysCheck.log` file (saved to the root as well) contains additional information about your IOS.
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -109,16 +109,25 @@ Unfortunately, because of the codebase difference between the original WiiFlow a
|
|||
|
||||
#### Instructions
|
||||
1. Download a theme `.zip` file from the website linked above.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Paste the `.zip` into the `apps` folder on your storage device where you load homebrew.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Extract the contents of the `.zip` into the `apps` folder, and delete the archive.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Reinsert the storage device into your Wii and enter the Homebrew Channel.
|
||||
1. The theme you just installed can be loaded in the same way that you access a standard app.
|
||||
|
||||
|
||||
|
||||
|
||||
1. The theme should now be loaded, enjoy!
|
||||
|
||||
|
||||
|
||||
|
||||
### App Forwarders
|
||||
|
||||
|
|
@ -126,4 +135,4 @@ App forwarders can add a bit of extra flair to your Wii Menu - but be careful wi
|
|||
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -221,24 +221,35 @@ Make sure you have installed [cIOS](cios) before following this!
|
|||
|
||||
1. Open Dolphin Emulator.
|
||||
1. In the main menu, select `File > Open User Folder`.
|
||||
|
||||
|
||||
|
||||
|
||||
1. In the folder that opens, navigate to `GC > [Save region] > Card A`.
|
||||
1. Copy the `.gci` files you would like to put on your Memory Card.
|
||||
1. Create a folder named `MCBACKUP` on your SD card or USB drive, and place the `.gci` files you copied into it.
|
||||
{{ dolphin-emu-memcard-manager }}
|
||||
|
||||
{{ dolphin-emu-memcard-manager }}
|
||||
|
||||
1. Download and extract GCMM to the root of your SD card or USB drive.
|
||||
1. Safely eject the SD/USB from your PC, then insert it into your Wii.
|
||||
1. Launch the Homebrew Channel, then launch GCMM.
|
||||
1. Select the device you have copied the `.gci` files to.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `+`/`X` to enter Restore mode.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the slot that has your Memory card.
|
||||
|
||||
1. Select the save you would like to restore. <br>
|
||||
If you would like to restore all the saves in `MCBACKUP`, press `1`/`R`.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the save you would like to restore.
|
||||
+ If you would like to restore all the saves in `MCBACKUP`, press `1`/`R`.
|
||||
|
||||
|
||||
|
||||
1. When restoration is complete, press any button to continue.
|
||||
|
||||
</div>
|
||||
|
|
@ -283,11 +294,17 @@ All methods here require a Wii with GameCube ports.
|
|||
1. Safely eject the SD/USB from your PC, then put it into your Wii.
|
||||
1. Launch the Homebrew Channel, then launch GCMM.
|
||||
1. Select the device you would like to copy the save file to.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `B` and `-`/`L` and `Y` to enter Raw backup mode.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the slot that has your memory card.
|
||||
|
||||
|
||||
|
||||
|
||||
1. When the dump is complete, press any key to continue.
|
||||
1. Press HOME/START to exit GCMM.
|
||||
1. Insert your SD card/USB drive into your PC.
|
||||
|
|
@ -309,11 +326,17 @@ All methods here require a Wii with GameCube ports.
|
|||
1. Safely eject the SD/USB from your PC, then put it into your Wii.
|
||||
1. Launch the Homebrew Channel, then launch GCMM.
|
||||
1. Select the device you would like to copy the save file to.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `B` and `-`/`L` and `Y` to enter Raw backup mode.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the slot that has your memory card.
|
||||
|
||||
|
||||
|
||||
|
||||
1. When the dump is complete, press any key to continue.
|
||||
1. Press HOME/START to exit GCMM.
|
||||
1. Insert your SD card/USB drive into your PC.
|
||||
|
|
@ -341,10 +364,13 @@ All methods here require a Wii with GameCube ports.
|
|||
|
||||
1. Insert both memory cards into your Wii.
|
||||
1. Launch the Wii menu and select the Wii Options button at the bottom left.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select `Data Management > Save Data > Nintendo GameCube`.
|
||||
1. Select the save you would like to copy and select `Copy`.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
</div>
|
||||
|
|
@ -396,14 +422,22 @@ All methods here require a Wii with GameCube ports.
|
|||
1. Safely eject the SD/USB from your PC, then insert it into your Wii.
|
||||
1. Launch the Homebrew Channel, then launch GCMM.
|
||||
1. Select the device you have copied the `.gci` files to.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Press `+`/`X` to enter Restore mode.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the slot that has your Memory card.
|
||||
|
||||
1. Select the save you would like to restore. <br>
|
||||
If you would like to restore all the saves in `MCBACKUP`, press `1`/`R`.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Select the save you would like to restore.
|
||||
+ If you would like to restore all the saves in `MCBACKUP`, press `1`/`R`.
|
||||
|
||||
|
||||
|
||||
1. When restoration is complete, press any button to continue.
|
||||
|
||||
<div>
|
||||
|
|
|
|||
|
|
@ -25,11 +25,14 @@ Forwarders to open these loaders on the Wii Menu can be found on the Open Shop C
|
|||
+ SD cards are fully supported for loading Wii games on WiiFlow Lite.
|
||||
+ WiiFlow Lite has a plugin system.
|
||||
+ While the original WiiFlow was last updated in 2014, the WiiFlow Lite fork is still recieving regular updates.
|
||||
|
||||
|
||||
|
||||
+ USB Loader GX is primarily modeled after the Wii Menu, and supports themes.
|
||||
+ While SD cards were previously unsupported for loading Wii games on USB Loader GX, recent updates have introduced support into the loader. Compatability may be hit or miss.
|
||||
+ USB Loader GX has no plugin system.
|
||||
+ USB Loader GX still recieves regular updates.
|
||||
|
||||
|
||||
|
||||
### Game Directory Structure
|
||||
|
|
@ -166,4 +169,4 @@ To change the cIOS used for a specific game, follow the instructions specific to
|
|||
|
||||
[Continue to Nintendont](nintendont)
|
||||
Now that you have installed a USB loader of some type for Wii games, you can install a similar type of application for effectively native playback of GameCube games.
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -37,13 +37,20 @@ You may format it as NTFS, but it won't work with a majority of apps (eg. The Ho
|
|||
#### Section II - Copying Games Over
|
||||
|
||||
1. Go to the `Drive 1` tab, then select the drive that you're putting the Wii games on.
|
||||
|
||||
|
||||
1. Go to the `Files` tab, then select `Add`. <br>
|
||||
Select `Files` to add multiple games to the program, or select `Folder` to add a whole folder of games.
|
||||
|
||||
1. Go to the `Files` tab, then select `Add`.
|
||||
+ Select `Files` to add multiple games to the program, or select `Folder` to add a whole folder of games.
|
||||
|
||||
|
||||
|
||||
1. Go to `Select`, then click `Games not on drive 1`.
|
||||
|
||||
|
||||
|
||||
1. Select `Transfer`, then select `Drive 1` to transfer the games over. It might take a while for the games to copy over.
|
||||
|
||||
|
||||
|
||||
### Options once complete
|
||||
|
|
|
|||
|
|
@ -61,4 +61,4 @@ If you choose to install either of these services on your Wii, it is advised to
|
|||
|
||||
[Proceed to Nintendo Wi-Fi Connection](wiimmfi)<br>
|
||||
This guide takes the process of regaining online functionality to your Wii a step further - by allowing the Nintendo Wi-Fi Connection services to function yet again on certain games like Mario Kart Wii. While there are different private servers and services that allow this, the one covered here will be Wiimmfi.
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -23,9 +23,13 @@ Do NOT make a shortcut for the games "Mario Party 9" or "A Boy and His Blob". It
|
|||
### Instructions
|
||||
|
||||
1. Install WiiGSC, then right click on it and choose **Run as administrator**. If you do not do this, WiiGSC will throw an error when you open it.
|
||||
|
||||
|
||||
|
||||
1. Select the path to the ISO or WBFS file on your USB drive, and select the USB Loader you use. The other options should be fine the way they are.
|
||||
|
||||
|
||||
|
||||
1. Install the generated WAD with your WAD manager.
|
||||
|
||||
<div class="notice--info">
|
||||
|
|
@ -36,4 +40,4 @@ Simply enter the Homebrew Channel, and use your WAD manager to uninstall the WAD
|
|||
</div>
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -26,13 +26,17 @@ A method for Wiimmfi patching which runs on retail disc games automatically via
|
|||
|
||||
1. Hold the RESET button while turning on your Wii. If you are using a Wii mini, plug in a USB keyboard and hold Escape while turning it ON.
|
||||
1. You should see the Priiloader menu.
|
||||
|
||||
|
||||
|
||||
1. Go to `System Menu Hacks`.
|
||||
If you used a USB drive to install Priiloader, make sure you do not have an SD card inserted at the same time.
|
||||
This will cause Priiloader to be unable to find the hacks_hash.ini file.
|
||||
{: .notice--info}
|
||||
1. Make sure the `Wiimmfi patch v4` hack is enabled.
|
||||
|
||||
|
||||
|
||||
1. Scroll to `Save Settings` and save your changes.
|
||||
1. Return to the main menu, and press `System Menu` to return to the Wii Menu.
|
||||
1. Launch your game through the Disc Channel - it should now be patched with Wiimmfi.
|
||||
|
|
@ -99,7 +103,9 @@ A method for Wiimmfi patching which runs on retail game discs, but must be manua
|
|||
|
||||
1. Insert your game disc.
|
||||
1. Go to `Wii Settings > Internet > Connection Settings` and select whatever connection you are using. Then, `Change Settings > Auto-Obtain DNS NO > Advanced Settings`. Set your primary DNS to `95.217.77.151`, and your secondary DNS to `1.1.1.1`.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Let the connection test finish, and do not perform a Wii System Update.
|
||||
1. Go back twice to `Internet`, and press `User Agreements`. Then, confirm that you would like to use WC24 and the Wii Shop Channel.
|
||||
1. The Wiimmfi patcher page should now display. If it doesn't, and you still see the default license agreement, your router might not be compatible with this method.
|
||||
|
|
@ -168,4 +174,4 @@ Congrats on making it to the end of the optional section of the main guide! You
|
|||
{: .notice--success}
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
|
|
@ -29,15 +29,21 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
|
|||
1. Go to `Wii Settings`.
|
||||
1. Take note in the top right corner of the letter next to the system version.
|
||||
+ This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
|
||||
|
||||
|
||||
|
||||
1. Navigate to `Internet` > `Console Information`.
|
||||
1. Take note of your FULL MAC address.
|
||||
|
||||
|
||||
|
||||
1. On your computer, open the browser and go to [wilbrand.donut.eu.org](https://wilbrand.donut.eu.org/).
|
||||
1. Input your Wii MAC, version and region.
|
||||
1. Ensure `Bundle the HackMii Installer for me!` is checked.
|
||||
1. Cut either wire.
|
||||
|
||||
|
||||
|
||||
1. Click on "Download your .zip".
|
||||
1. Insert your SD card into your computer.
|
||||
1. Copy the `private` folder and the `boot.elf` file from the downloaded `.zip` to the root of your SD card.
|
||||
|
|
@ -49,7 +55,9 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
|
|||
+ Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
|
||||
+ In some cases, you may need to check the messages for tommorow or yesterday for the letter to show up.
|
||||
+ If you don't see the green letter, check if any errors appear in the SD card section of `Data Management`. If any do, there may be an issue with the SD card format or the Wii’s SD card reader.
|
||||
|
||||
|
||||
|
||||
1. If the exploit was successful, your device will have loaded the HackMii Installer.
|
||||
+ If this didn't work for you, [try another exploit](get-started) such as Letterbomb or try [Wilbrand CLI](#wilbrand-cli).
|
||||
|
||||
|
|
@ -75,10 +83,14 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
|
|||
1. Go to `Wii Settings`.
|
||||
1. Take note in the top right corner of the letter next to the system version.
|
||||
+ This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
|
||||
|
||||
|
||||
|
||||
1. Navigate to `Internet` > `Console Information`.
|
||||
1. Take note of your FULL MAC address.
|
||||
|
||||
|
||||
|
||||
1. Copy all files from the Wilbrand `.zip` to a folder on your computer
|
||||
1. Insert your SD card into your computer.
|
||||
1. Open a terminal inside the folder Wilbrand was extracted to.
|
||||
|
|
@ -86,11 +98,13 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
|
|||
|
||||
+ Windows: `.\Wilbrand.exe AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION X:`
|
||||
+ `X:` is the drive letter of your SD card.
|
||||
|
||||
|
||||
|
||||
+ Linux/MacOS: `./Wilbrand AA-BB-CC-DD-EE-FF MM/DD/YYYY VERSION /media/mount_dir`
|
||||
+ If you have not opened your terminal directly in the folder Wilbrand was extracted to, use `cd` to enter it first, eg. `cd ~/Desktop/Wilbrand`
|
||||
+ `/media/mount_dir` is the folder your SD card is mounted in. This may vary depending on your Linux distro.
|
||||
|
||||
|
||||
|
||||
1. Copy all files from the hackmii_installer_v1.2 `.zip` to a folder on your computer.
|
||||
|
|
@ -104,7 +118,9 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
|
|||
+ Ensure the date on your Wii is correct, otherwise you might be unable to find the letter.
|
||||
+ In some cases, you may need to check the messages for tommorow or yesterday for the letter to show up.
|
||||
+ If you don't see the green letter, check if any errors appear in the SD card section of `Data Management`. If any do, there may be an issue with the SD card format or the Wii’s SD card reader.
|
||||
|
||||
|
||||
|
||||
1. If the exploit was successful, your device will have loaded the HackMii Installer.
|
||||
|
||||
[Continue to Homebrew Channel and BootMii Installation](hbc)
|
||||
|
|
|
|||
|
|
@ -21,16 +21,24 @@ This tutorial will show you how to install WADs.
|
|||
#### Section II - Installing WADs
|
||||
|
||||
1. Select the source device that has the WAD file(s) you would like to install.
|
||||
|
||||
|
||||
|
||||
1. Navigate to the folder that has the WAD files.
|
||||
+ If you have a folder named `wad`, it will be opened automatically.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Navigate to the WAD file you would like to install and press `A`.
|
||||
+ If you would like to install multiple WAD files at once, press `+` on each of them, then press `A`.
|
||||
|
||||
|
||||
|
||||
1. Press A again to install the WAD(s).
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
[Click here to go back to the site index.](site-navigation)
|
||||
{: .notice--info}
|
||||
{: .notice--info}
|
||||
|
|
|
|||
Loading…
Reference in a new issue