Guide_Wii/_pages/tr_TR/finalizing-setup.txt
2017-05-24 16:57:28 -04:00

199 lines
No EOL
10 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---
title: "Finalizing Setup"
---
#### Adımlara genel bakış
{% capture notice-2 %}
The file `boot.firm` is what is launched by boot9strap itself after it finishes loading off of NAND, and can be any valid arm9 payload in the FIRM format. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads in the FIRM format using the Luma3DS chainloader.
<br><br>
Biz bu rehberde, AuroraWright'ın Luma3DS [AuroraWright](https://github.com/AuroraWright/) kullanacağız, bu sayede EmuNAND ile alakalı bir işlem yapmamıza gerek kalmayacak ve işi basitleştirip SD kart hafızasında da daha az yer kaplayacak.
<br><br>
Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
+ **FBI** *(CIA formatlı oyunları ve uygulamaları kurar)*
+ **Themely** *(installs custom themes)*
+ **Luma3DS Updater** *(Custom Firmware yüklemenizi kolayca günceller)*
+ **GodMode9** *(multipurpose tool which can do NAND and cartridge functions)*
{% endcapture %}
<div class="notice--info">{{ notice-2 | markdownify }}</div>
#### Nelere ihtiyacınız var
* En son sürümü [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the '.7z' file) *
* The latest release of [Themely](https://github.com/ErmanSayin/Themely/releases/latest) *(the `.cia` file)*
* En son sürümü [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
* En son sürümü [GodMode9] (https://github.com/d0k3/GodMode9/releases/latest)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* En son sürümü [FBI](https://github.com/Steveice10/FBI/releases/latest)
* The latest fork of [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
* **Old 3DS and 2DS Only:** The Old 3DS 11.2.0-35 [otherapp payload](https://smealum.github.io/3ds/#otherapp) for your region
#### Talimatlar
##### Bölüm l - Hazırlık
1. SD kartınızı bilgisayarınıza takın
1. SD kartınızın ana dizininde eğer yoksa `cias` isminde klasör oluşturun
1. Create a folder named `hblauncherloader` on the root of your SD card if it does not already exist
1. `hblauncher_loader.cia` dosyasını hblauncher_loader`.zip` dosyasından SD kartınızdaki `/ cias /` klasörüne kopyalayın
1. `Lumaupdater.cia` dosyasını Luma3DS Uprdater`.zip` dosyasından SD kartınızdaki `/ cias /` klasörüne kopyalayın
1. `FBI.cia 'dosyasını FBI`.zip` dosyasından SD kartınızdaki `/ cias /` klasörüne kopyalayın
1. Copy `DSP1.cia` to the `/cias/` folder on your SD card
1. Copy `Themely.cia` to the `/cias/` folder on your SD card
![]({{ base_path }}/images/screenshots/cias-file-layout.png)
{: .notice--info}
1. Copy `boot.firm` from the Luma3DS `.7z` to the root of your SD card
1. SD kartınızın kök dizininde `luma` adlı bir klasör oluşturun
1. SD kartınızdaki `luma` klasöründe` payloads` adlı bir klasör oluşturun
1. Copy `GodMode9.firm` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. **Old 3DS and 2DS Only:** Copy the Old 3DS 11.2.0-35 otherapp payload for your region to the `/hblauncherloader/` folder on your SD card
1. **Old 3DS and 2DS Only:** Rename the Old 3DS 11.2.0-35 otherapp payload on your SD card to match your region:
+ **EUR:** `OLD-11-4-0-37-EUR.bin`
+ **JPN:** `OLD-11-4-0-37-JPN.bin`
+ **KOR:** `OLD-11-4-0-37-KOR.bin`
+ **USA:** `OLD-11-4-0-37-USA.bin`
![]({{ base_path }}/images/screenshots/finalizing-setup-file-layout.png)
{: .notice--info}
1. If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:
+Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) ve `firmware.bin` olarak yeniden adlandırın
+ Bunu indirin [bu dosyayı](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
+ `firmware.bin` ve` cetk` dosyalarını SD kartınızdaki `/ luma /` klasörüne kopyalayın
+ Delete both of these files after updating your device later in these instructions
1. SD kartınızı cihazınıza tekrar takın
##### Section II - Configuring Luma3DS
1. Boot your device to enter the Luma3DS configuration menu
+ If you get a black screen, [follow this troubleshooting guide](troubleshooting#ts_sys_b9s)
1. (A) düğmesi ve D-Pad kullanarak aşağıdakileri açın:
+ **"Show NAND or user string in System Settings"**
1. Kaydedip yeniden başlatmak için (Start) basın
+ Siyah ekran alırsanız yine de bir sonraki bölüme geçin
##### Section III - Updating the System
If, while following a previous version of this guide, you CTRTransfered your *New 3DS* to 2.1.0, now is the time to [restore your NAND backup](godmode9-usage#nand_restore) before doing this section.
{: .notice--danger}
If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to [follow Move EmuNAND](move-emunand) before doing this section.
{: .notice--info}
1. Update your device by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
+ Updates while using B9S + Luma (what you have) are safe
+ Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin
+ If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
##### Section IV - Injecting FBI
1. Reboot holding (Start) during boot to launch GodMode9
1. Navigate to `[0:] SDCARD` -> `cias`
1. Press (A) on `FBI.cia` to select it, then select "CIA image options...", then select "Mount image to drive"
1. Press (A) on the `.app` file, then select "NCCH image options", then select "Inject to H&S"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Devam etmek için (A) basın
1. Press (Start) to reboot your device
1. Eğer hala orjinal Health & Safety app açılıyorsa ve geçmişte Gateway kullanarak downgrade yaptıysanız, [bu sorun giderme rehberine bakın](troubleshooting#gw_fbi)
##### Section V - Installing CIAs
1. Launch Health and Safety (which is now FBI)
1. Navigate to `SD` -> `cias`
1. "\<current directory>" 'i seçin
1. Select the "Install and delete all CIAs" option, then press (A) to confirm
1. Press (Home) to exit FBI
##### Section VI - DSP Dump
1. Launch DSP1
1. Once it has completed, press (B) to self-delete the app and return to the home menu
##### Section VII - Restore Health and Safety
1. Reboot holding (Start) during boot to launch GodMode9
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Restore H&S"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
##### Section VIII - CTRNAND Luma3DS
1. Press (B) to return to the main menu
1. Navigate to `[0:] SDCARD`
1. Press (Y) on `boot.firm` to copy it
1. Press (B) to return to the main menu
1. Navigate to `[1:] SYSNAND CTRNAND`
1. Press (Y) to paste a copy of `boot.firm`
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Press (B) to return to the main menu
1. Navigate to `[0:] SDCARD`
1. Press (Y) on the `luma` folder to copy it
1. Press (B) to return to the main menu
1. Navigate to `[1:] SYSNAND CTRNAND` -> `rw`
1. Press (Y) to paste a copy of the `luma` folder from your SD card
##### Section IX - NAND Backup
1. Press (B) twice to return to the main menu
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Backup NAND"
1. Devam etmek için (A) basın
1. SD kartınızı çıkarmak için aynı anda (R) ve (B) ye basın ve basılı tutun
1. SD kartınızı bilgisayarınıza takın
1. Copy `nand.bin` from the `/gm9out/` folder on your SD card to a safe location on your computer
+ Make backups in multiple locations (such as online file storage)
Bu yedek eğer ileride bir şey ters giderse cihazın brick olma ihtimalini engelleyecek
1. Delete `nand.bin` from the `/gm9out/` folder on your SD card after copying it
1. SD kartınızı cihazınıza tekrar takın
1. Kaydedip yeniden başlatmak için (Start) basın
___
{% capture notice-10 %}
Artık Luma3DS'i güncellemek için tek yapmanız gereken Luma3DS Updater'i açıp (A)'ya basıp güncelle demektir.
Bu bir Sistem Güncellemesi ile aynı şey değildir; sadece en yeni Luma3DS dosyalarını indirir ve çıkarır.
This will only update the Luma3DS files on your SD card. If you boot your device without an SD card, it will use the version you placed in CTRNAND.
{% endcapture %}
<div class="notice--info">{{ notice-10 | markdownify }}</div>
{% capture notice-6 %}
You will now boot Luma3DS CFW SysNAND by default.
Luma3DS yapılandırma menüsünü başlatmak için önyüklemede (Select) tuşunu basılı tutabilirsiniz.
You can now hold (Start) on boot to launch the Luma3DS chainloader menu (note that the Luma3DS chainloader menu is only displayed if there is more than one payload detected).
You can now hold (Start) + (Select) + (X) on boot to dump the ARM11 bootrom (`boot11.bin`), the ARM9 bootrom (`boot9.bin`), and your console unique OTP (`OTP.bin`) to the `/boot9strap/` folder on your SD card (note that this will not have any kind of prompt or message).
{% endcapture %}
<div class="notice--info">{{ notice-6 | markdownify }}</div>
To use [NTR CFW](https://github.com/44670/BootNTR/), install [BootNTR Selector](https://gbatemp.net/threads/432911/).
{: .notice--info}
{% capture notice-7 %}
Remove any extra files and folders from the root of your SD card that are *not* in the following image:
<br><br>
![]({{ base_path }}/images/screenshots/final-file-layout.png)
{% endcapture %}
<div class="notice--info">{{ notice-7 | markdownify }}</div>
Cihazınızın bölgesini başka bir bölgeye çevirmek için, rehberin [Bölge Değiştirme](region-changing) kısmına bakın.
{: .notice--success}
For information on using GodMode9's various features, check out the [GodMode9 Usage](godmode9-usage) page.
{: .notice--success}
Luma3DS'in çeşitli özelliklerini kullanmak için, yazılımın [wiki sayfasına](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage) bakın.
{: .notice--success}
For information on installing custom themes, badges, and splash screens, check out [3dsthem.es](https://3dsthem.es/about.php).
{: .notice--success}