Guide_Wii/_pages/zh_TW/flashing-ntrboot-(custom-firmware).txt
2017-08-12 19:26:54 -04:00

52 lines
No EOL
2.5 KiB
Text

---
title: "Flashing ntrboot (Custom Firmware)"
---
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
Note that the flashcart will not be able to be used for its standard functions while the ntrboot exploit is installed on it. There are optional steps at the end of the ntrboot flashing instructions to remove it from your flashcart when you are done.
{: .notice--warning}
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
#### 必備項目
* Your ntrboot compatible DS / DSi flashcart:
+ Either the Acekard 2i or R4i Gold 3DS RTS
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax)
+ **The target 3DS**: the device on stock firmware
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
#### 操作說明
##### 第一節 — 準備工作
1. 將 **3DS 始源機** 關機
1. 將 **3DS 始源機** 的 SD 卡插入至電腦中
1. Create a folder named `ntrboot` on the root of your SD card
1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
##### Section II - Flashing ntrboot
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
1. Select "ntrboot_flasher"
1. Select "Dump Flash"
1. 等到檢查完畢為止。
1. 按「B」回到主選單
1. Select "Inject Ntrboot"
1. Press (Y) to proceed
1. Press (R) for retail unit ntrboot
1. 等到檢查完畢為止。
1. 按「B」回到主選單
1. Select "EXIT" to power off **the source 3DS**
___
Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
{: .notice--primary}