83 lines
No EOL
3.3 KiB
Text
83 lines
No EOL
3.3 KiB
Text
---
|
||
title: "Installing boot9strap (ntrboot)"
|
||
---
|
||
|
||
#### 必備項目
|
||
|
||
* A magnet that triggers the sleep mode of your device (if using a folding style device)
|
||
* Your ntrboot flashed flashcart
|
||
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
|
||
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案）*
|
||
* 最新版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(`.7z` 檔案)*
|
||
* 自製軟體[入門套件](http://smealum.github.io/ninjhax2/starter.zip)
|
||
|
||
#### 操作說明
|
||
|
||
##### 第一節 — 準備工作
|
||
|
||
1. 關閉您的主機
|
||
1. 將 SD 卡插入電腦中
|
||
1. Copy `SafeB9SInstaller.firm` to the root of your SD card and rename it to `boot.firm`
|
||
1. 複製`starter.zip`裡的 _所有內容_ 到 SD 卡的根目錄底下
|
||
1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap`
|
||
1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中
|
||
|
||
|
||
{: .notice--info}
|
||
|
||
1. 將 SD 卡插回主機中
|
||
1. 啟動您的主機
|
||
|
||
##### Section II - ntrboot
|
||
|
||
1. Use the magnet to find the spot on your device where the sleep sensor is triggered
|
||
+ This step is not needed on non-folding style devices (such as the old 2DS)
|
||
1. 關閉您的主機
|
||
1. Insert your flashcart into your device
|
||
1. Power on your device, with the magnet in the sleep triggering position (or toggling the sleep switch on non-folding style devices), while holding (Start) + (Select) + (X)
|
||
+ It may take a few attempts to get this to work because the positioning is awkward
|
||
1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
|
||
|
||
##### 第三節 — 安裝 boot9strap
|
||
|
||
1. 等待所有安全性檢查完畢
|
||
1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap
|
||
1. Once it has completed, force your device to power off by holding down the power button
|
||
+ Your device will only boot to the SafeB9SInstaller screen until the next section is completed
|
||
|
||
##### 第四節 — 設定 Luma3DS
|
||
|
||
1. 將 SD 卡插入電腦中
|
||
1. Delete `boot.firm` from the root of your SD card
|
||
1. 解壓 Luma3DS `.7z` 內的 `boot.firm` 到 SD 卡的根目錄底下
|
||
1. 將 SD 卡插回主機中
|
||
1. 啟動您的主機
|
||
1. 您的主機將會啟動至 Luma3DS 設定選單中
|
||
+ 如果黑屏，[請參見此疑難排解](troubleshooting#ts_sys_b9s)
|
||
1. 透過方向鍵及「A」以開啟下列選項：
|
||
+ **「Show NAND or user string in System Settings」**
|
||
1. 按下「Start」鍵以存檔並重新啟動系統
|
||
+ 如果你遇到了錯誤訊息，繼續到下一頁即可
|
||
|
||
___
|
||
|
||
繼續至 [完成安裝](finalizing-setup)
|
||
{: .notice--primary}
|
||
|
||
___
|
||
|
||
##### Section V - Removing ntrboot
|
||
|
||
This is an optional section that will allow you to restore your flashcart to its original state (to allow it to be used for its standard functions).
|
||
{: .notice--info}
|
||
|
||
Do not follow this section until you have completed the rest of the instructions on this page.
|
||
{: .notice--warning}
|
||
|
||
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
|
||
1. Select "ntrboot_flasher"
|
||
1. Select "Restore Flash"
|
||
1. Press (Y) to proceed
|
||
1. 等到檢查完畢為止。
|
||
1. 按「B」回到主選單
|
||
1. Select "EXIT" to power off **the source 3DS** |