Guide_Wii/_pages/no_NO/Move-EmuNAND.txt

---
title: "Flytt EmuNAND" #
lang: no
permalink: /no_NO/move-emunand.html
---

This is an add-on section for moving the contents of a previous EmuNAND to your new SysNAND CFW, then removing the old EmuNAND partition. Merk at EmuNAND og RedNAND refererer til litt forskjellige implementeringer av [det samme konseptet](http://3dbrew.org/wiki/NAND_Redirection).
{: .notice--info}

Note that, on some versions of Luma3DS, the Luma3DS chainloader menu is only displayed if there is more than one payload detected. If there is only one payload detected, holding (Start) on boot will directly launch GodMode9.
{: .notice--info}

**You MUST have already installed Luma3DS and boot9strap or arm9loaderhax to use this.**
{: .notice--danger}

#### Det du trenger

* En eksisterende EmuNAND
* Siste utgave av [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* Siste utgave av [FBI](https://github.com/Steveice10/FBI/releases/latest)

#### Instruksjoner

##### Seksjon I - Forarbeid

1. Power off your device
1. Sett inn SD-kortet i datamaskinen din
1. Copy `GodMode9.firm` (or `GodMode9.bin` for arm9loaderhax users) from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card
1. Reinsert your SD card into your device

##### Section II - Backup SysNAND DSiWare Saves

If you do not have any DSiWare games or saves that you care about, skip this section.
{: .notice--info}

1. Boot your device while holding (Start) to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Hold (R) and press (A) at the same time on `00030004` to select the folder, then select "Copy to 0:/gm9out"
  + This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu

##### Section III - Backup GBA VC Saves

If you do not have any GBA VC games or saves that you care about, skip this section.
{: .notice--info}

Note that this is not necessary for any other kind of Virtual Console games (GBC, NES, etc)
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Sett inn SD-kortet i datamaskinen din
1. Opprett en mappe kalt `files9` på roten av SD-kortet hvis den ikke allerede er der
1. Create a folder in `/files9/` for each GBA VC game that you want to backup the save for 
1. Reinsert your SD card into your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) to paste `gbavc.sav`
  + Press (Start) to reboot your device
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)

##### Section IV - Copy EmuNAND to SysNAND

1. Navigate to `[E:] EMUNAND VIRTUAL`
1. Press (A) on `nand.bin` to select it, then select "NAND image options...", then select "Restore SysNAND (safe)"
1. Press (A) to unlock SysNAND overwriting, then input the key combo given
  + This will not overwrite your arm9loaderhax installation
1. Input the key combo given to unlock SysNAND (lvl1) writing
  + This process will take some time
1. Once it has completed, press (A) to continue
1. Press (B) to return to the main menu

##### Section V - Restore DSiWare Saves

If you did not backup DSiWare Saves earlier, skip this section.
{: .notice--info}

1. Navigate to `[0:] SDCARD` -> `gm9out`
1. Press (Y) on the `00030004` folder to copy it
1. Press (B) twice to return to the main menu
1. Navigate to `[2:] SYSNAND TWLN` -> `title`
1. Press (Y) to paste the `00030004` folder
1. Select "Copy path(s)"
1. Press (A) to unlock SysNAND (lvl1) writing, then input the key combo given
1. Select "Overwrite file(s)"
  + This process may take some time if you have many DSiWare games
1. Press (B) twice to return to the main menu

##### Section VI - Restore GBA VC Saves

If you did not backup GBA VC Saves earlier, skip this section.
{: .notice--info}

1. Hold (R) and press (Start) at the same time to power off your device
1. Power on your device into SysNAND
1. Do the following process for each GBA VC game that you want to backup the save for:
  + Launch the GBA VC game on SysNAND
  + Exit the GBA VC game
  + Boot your device while holding (Start) to launch the Luma3DS chainloader menu
  + Launch GodMode9 by pressing (A)
  + Navigate to `[0:] SDCARD` -> `files9`
  + Navigate to the folder you created for this GBA VC game
  + Press (Y) on `gbavc.sav` to copy it
  + Press (B) to return to the main menu
  + Navigate to `[S:] SYSNAND VIRTUAL`
  + Press (Y) to paste `gbavc.sav`
  + Press (A) to confirm
  + Press (Start) to reboot your device
1. Reboot holding (Start) during boot to launch the Luma3DS chainloader menu
1. Launch GodMode9 by pressing (A)

##### Section VII - Backup SysNAND

1. Press (Home) to bring up the action menu
1. Select "More..."
1. Select "Backup NAND"
1. Trykk (A) for å fortsette
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy `nand.bin` from the `/gm9out/` folder on your SD card to a safe location on your computer
  + If you previously used SafeCTRTransfer and have a NAND backup named `<serialnumber>_nand.bin`, replace it with this one (rename `nand.bin` to match `<serialnumber>_nand.bin`)
  + Make backups in multiple locations (such as online file storage)
  + Denne sikkerhetskopien vil spare deg fra en brick hvis noe går galt i fremtiden
1. Delete `nand.bin` from the `/gm9out/` folder on your SD card after copying it
1. **Sikkerhetskopiér alle filene på SD-kortet til en mappe på datamaskinen, alle filene vil slettes i det neste trinnet**

##### Section VIII - Format SD card

1. Reinsert your SD card into your device
1. Press (Home) to bring up the action menu
1. Select "More..."
1. Velg "SD format menu"
1. Trykk (A) for å bekrefte
1. Velg "No EmuNAND"
1. Velg "Auto"
1. Press (A) to accept the label `GM9SD`
  + Optionally, you may input a custom name for the SD card
1. When prompted, input the key combo given to confirm
1. Hold (R) og trykk (B) for å løse ut SD-kortet
1. Sett inn SD-kortet i datamaskinen din
1. Copy all your files back to your SD card
  + Ensure you replace the `boot.firm` file on your SD card with the one from your backup
1. Reinsert your SD card into your device
1. Trykk (A) for å montere SD-kortet på nytt
1. Trykk (Start) for å lagre og starte på nytt
1. + Hvis du får en svart skjerm, [følg denne feilsøkingsveiledningen](troubleshooting#ts_sys_down)

___

Return to [Finalizing Setup](finalizing-setup).
{: .notice--primary}