Guide_Wii/_pages/pt_BR/Installing-arm9loaderhax.txt

---
title: "Instalando arm9loaderhax" #
lang: pt
permalink: /pt_BR/installing-arm9loaderhax.html
---

The final Step of this guide is to install arm9loaderhax and setup Luma3DS to run just milliseconds into the boot. This is accomplished by using SafeA9LHInstaller by [AuroraWright](https://github.com/AuroraWright/).
{: .notice}

Isto irá instalar a [versão de AuroraWright](https://github.com/AuroraWright/arm9loaderhax) do arm9loaderhax.
{: .notice--info}

Iremos também configurar a habilidade de rodar payloads do arm9loaderhax, nos dando a habilidade de desbrickar a nossa SysNAND de situações que normalmente brickariam o nosso aparelho ao restaurá-la de um backup.
{: .notice--info}

**You cannot use another console's OTP or you will brick GUARANTEED.**
{: .notice--danger}

#### Visão geral das etapas

In this section, we will go through the process that all the other steps have led up to: actually installing arm9loaderhax.

This is nearly the best possible kind of device exploit because it is permanently installable into the NAND firm partitions, and runs before most of the OS loads, allowing it to not only work on *all* versions once installed, but also protect itself and recover from most situations that would brick a non-A9LH 3DS such as a nonfunctional home menu or bad title install.

The file `arm9loaderhax.bin` is what is launched by arm9loaderhax itself after it finishes loading off of NAND, and can be any valid arm9 payload. This file can be replaced at any time, although Luma3DS allows for the launch of other arm9 payloads by holding buttons on boot.

Neste caso, usamos o Luma3DS por [AuroraWright](https://github.com/AuroraWright/) para carregar uma SysNAND com patches diretamente, o que nos permite evitar a necessidade de qualquer tipo de EmuNAND, simplificando enormemente o uso de um 3DS hackeado, além de economizar espaço no cartão SD.

Once arm9loaderhax is installed and Luma3DS is setup with the correct options, we then restore our previous backup.

During this process, we also setup programs such as the following:    

+  **FBI** *(installs CIA formatted games and applications)*
+  **Luma3DS Updater** *(updates our CFW installation easily)*
+  **Hourglass9** *(multipurpose tool which can do NAND and cartridge functions)*

#### O que você precisa

* [`aeskeydb.bin`](magnet:?xt=urn:btih:18b3a17f78e2376e05feaa150749d9fd689b25dc&dn=aeskeydb.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* [`fbi-2.4.2-injectable.zip`](magnet:?xt=urn:btih:f978b4cf5eda72823240b9c649f3fd2940a9f525&dn=fbi-2.4.2-injectable.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* [`data_input_v3.zip`](magnet:?xt=urn:btih:a1195c9f7ab650fa7c7bf020b51fc19ea8d9440c&dn=data%5Finput%5Fv3.zip&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=http%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Fzer0day.ch%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=http%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2F9.rarbg.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=http%3A%2F%2Fp4p.arenabg.com%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker.aletorrenty.pl%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker.baravik.org%3A6970%2Fannounce&tr=http%3A%2F%2Ftracker.tfile.me%2Fannounce&tr=udp%3A%2F%2Ftorrent.gresille.org%3A80%2Fannounce&tr=http%3A%2F%2Ftorrent.gresille.org%2Fannounce&tr=udp%3A%2F%2Ftracker.yoshi210.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.filetracker.pl%3A8089%2Fannounce)
* The latest fork of [SafeA9LHInstaller](https://github.com/Plailect/SafeA9LHInstaller/releases/latest) *(the `.7z` file)*
* The latest release of [arm9loaderhax](https://github.com/AuroraWright/arm9loaderhax/releases/latest) *(the `.7z` file)*
* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *(the `.7z` file)*
* The latest release of [hblauncher_loader](https://github.com/yellows8/hblauncher_loader/releases/latest)
* The latest release of [Hourglass9](https://github.com/d0k3/Hourglass9/releases/latest)
* The latest release of [Luma3DS Updater](https://github.com/Hamcha/lumaupdate/releases/latest)
* The latest release of [DspDump](https://github.com/Cruel/DspDump/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
* The Homebrew [Starter Kit](http://smealum.github.io/ninjhax2/starter.zip)

#### Instruções

##### Seção I - Trabalho Preparatório

{% capture notice-5 %}
**Ensure you are using an SD card that is not corrupted!**

**If you use a corrupted SD card without fixing it, you may BRICK!**

**If you think your SD card may be corrupted, check your SD card for errors using [H2testw (Windows)](h2testw-(windows)), [F3 (Linux)](f3-(linux)), or [F3X (Mac)](f3x-(mac))!**
{% endcapture %}

<div class="notice--danger">{{ notice-5 | markdownify }}</div>

1. **If it exists, copy the `/files9/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage); the files inside could save you from total data loss if you break your system**
2. Create a folder named `cias` on the root of your SD card if it does not already exist
3. **Apague a pasta `a9lh` da raiz do cartão SD se ela existir**
  + **Se você acidentalmente instalar o arm9loaderhax usando o `otp.bin` de outro dispositivo, você irá BRICKAR!**
4. Apague a pasta `3ds` da raiz do seu cartão SD se ela existir
5. **Copy _the contents of_ the `starter` folder in `starter.zip` to the root of your SD card**
  + Isso incluirá uma nova pasta `3ds` para substituir a que você acabou de apagar
6. Copy _the contents of_ the SafeA9LHInstaller `.7z` to the root of your SD card
7. **Copy the `a9lh` folder from the data_input `.zip` to the root of your SD Card**
8. **Copy _the contents of_ the arm9loaderhax release `.7z` to `a9lh` folder on your SD card**
9. Copy `hblauncher_loader.cia` from the hblauncher_loader `.zip` to the `/cias/` folder on your SD card
10. Copy `lumaupdater.cia` from the Luma3DS Updater `.zip` to the `/cias/` folder on your SD card
11. Copy `FBI.cia` from the FBI `.zip` to the `/cias/` folder on your SD card
12. **Copy `arm9loaderhax.bin` from the Luma3DS `.7z` to the root of your SD card, overwrite existing files**
13. Create a folder named `luma` on the root of your SD card
14. Create a folder named `payloads` in the `luma` folder on your SD card
15. Copy `Hourglass9.bin` from the Hourglass9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `Hourglass9.bin` to `start_Hourglass9.bin`
16. Copy `GodMode9.bin` from the GodMode9 `.zip` to the `/luma/payloads/` folder on your SD card and rename `GodMode9.bin` to `up_GodMode9.bin`
17. Copy `aeskeydb.bin` to the `/files9/` folder on your SD card
18. Copy `DspDump.3dsx` to the `/3ds/` folder on your SD card
19. Copy _the contents of_ `fbi-2.4.2-injectable.zip` to the `/files9/` folder on your SD card

##### Seção II - Instalando arm9loaderhax

1. Reinsert your SD card into your 3DS
2. Do the steps for installing arm9loaderhax on your device:
  + You should be on 2.1.0
  + Go to `http://dukesrg.github.io/2xrsa.html?arm11.bin` on your 3DS
    + Se você receber o erro "This service is not available in your region", use as Configurações do Console para definir o país do dispositivo para coincidir com a região da NAND que você instalou com o ctrtransfer para a versão 2.1.0
    + Se você receber outro erro, [siga este guia de troubleshooting](troubleshooting#ts_browser)
    + Se você receber uma tela irregular, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh_screen)
    + If your wifi switch is off, unplug the 3DS and remove the battery for several seconds to enable wifi
  + Press (Select) to Full Install
  + The installer will now install arm9loaderhax on your device (this is very fast)
  + Shut down your console by pressing any button
  + Copy your console specific `otp.bin` from the `/a9lh/` folder on your SD card to a safe location on your computer and back it up to multiple locations (such as online file storage), then reinsert your SD card into your 3DS

##### Seção III - Configurando Luma3DS

1. Hold (Select) on boot to enter the Luma3DS menu
  + Make sure to start holding the button before pressing power
  + Se você receber uma tela preta, [siga este guia de troubleshooting](troubleshooting#ts_sys_a9lh)   
  + Se você inicializar e carregar o SafeA9LHInstaller, [siga este guia de troubleshooting](troubleshooting#ts_safe_a9lh)
2. Use o botão (A) e os botões direcionais para ativar o seguinte:    
  + **"Autoboot SysNAND"**
  + **"Use SysNAND FIRM if booting with R"**
  + **"Show NAND or user string in System Settings"**
3. Se você estiver usando um **New 3DS**, você *também* deve ativar o seguinte:
  + **"New 3DS CPU" to "Clock+L2(x)"**
    + Isso aumentará o framerate de muitos jogos, mas pode causar instabilidade em outros
    + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente
4. Press (Start) to save and reboot
  + If you get a black screen, just continue to the next section   
  + If you get a "Failed to mount CTRNAND" error, just continue to the next section     

##### Seção IV - Restaurando o Sistema

Se, antes de seguir este guia, você já tinha uma configuração EmuNAND e gostaria de mover o conteúdo da sua EmuNAND anterior para o seu novo CFW SysNAND, agora é a hora de [seguir Mover EmuNAND](move-emunand) ao invés de seguir as quatro primeiras etapas nesta seção.
{: .notice--info}

1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot
2. Go to "SysNAND Backup/Restore"
3. Go to "SysNAND Restore (keep a9lh)" and restore from `NANDmin.bin`
4. Aperte (Start) para reiniciar
  + If you get a black screen, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)
5. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/00000056) and rename it to `firmware.bin`
  + Download [this file](http://nus.cdn.c.shop.nintendowifi.net/ccs/download/0004013800000002/cetk)
  + Copy `firmware.bin` and `cetk` to the `/luma/` folder on your SD card
  + Apague ambos os arquivos após atualizar seu 3DS
2. Update your 3DS by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
  + Updates while using A9LH + Luma (what you have) are safe, stop asking about it
  + The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 ctrtransfer](9.2.0-ctrtransfer)


##### Seção V - Injetando o FBI

1. Open Hourglass9 from arm9loaderhax by holding (Start) on boot
2. Go to "SysNAND Backup/Restore", then select the "Health&Safety Dump" option to dump Health & Safety to `hs.app` **(you can use Up and Down / Left and Right to change the name)**
3. Press (B), then select the "Health&Safety Inject" option
4. Select the FBI injectable `.app` for your region
5. Press (A) and confirm to inject
6. Aperte (Start) para reiniciar
7. Se você ainda estiver inicializando o aplicativo Informações sobre saúde e segurança padrão e realizou um downgrade pelo Gateway no passado, [siga este guia de troubleshooting](troubleshooting#gw_fbi)

##### Seção VI - Finalizando a configuração

1. Open Health and Safety (which is now FBI)
2. Selecione "SD"
3. Selecione a pasta "cias"
4. Navegue até `FBI.cia` e aperte (A) para instalar
5. Navegue até `hblauncher_loader.cia` e aperte (A) para instalar
6. Navigate to `lumaupdater.cia` and press (A) to install
7. Return to the SD directory with (B)
8. Navigate to `arm9loaderhax.bin`, then press (A) on it and select the "Copy" option
9. Return to the FBI main menu with (B)
10. Select "CTR NAND"
11. Select "\<current directory>"
12. Select the "Paste" option, then press (A) to confirm
13. Sai com o botão Home
14. Launch the Homebrew Launcher from the home menu
15. Select "DSP Dump"
16. Press (Start) when prompted to exit
17. Reboot while holding (Start) to launch Hourglass9
18. Go to "SysNAND Backup/Restore", then select "Health&Safety Inject"
19. Select `hs.app` (the original one that doesn't contain FBI), then press (A) and confirm to inject
20. Press (Select) on the main menu to eject your SD card
21. Press (Start) to reboot with the SD card removed
  + Ao inicializar o dispositivo pelo menos uma vez com o cartão SD removido, você poderá configurar a instalação do Luma3DS baseada na CTRNAND
22. Use o botão (A) e os botões direcionais para ativar o seguinte:    
  + **"Show NAND or user string in System Settings"**
23. Se você estiver usando um **New 3DS**, você *também* deve ativar o seguinte:
  + **"New 3DS CPU" to "Clock+L2(x)"**
    + Isso aumentará o framerate de muitos jogos, mas pode causar instabilidade em outros
    + Se alguns jogos não funcionarem corretamente, desative essa opção e tente novamente
24. Reinsira o seu cartão SD, e aperte (Start) para salvar e reiniciar!

___

Se a funcionalidade DSi / DS estiver quebrada (como cartuchos de DS ou DSiWare não funcionando), [siga este guia de troubleshooting](troubleshooting#twl_broken)
{: .notice--warning}

{% capture notice-10 %}
You can now use Luma3DS Updater to update your Luma3DS to the latest version just by opening it and pressing (A).     
This is not the same thing as a System Update; it just downloads and extracts the newest Luma3DS files.
This will only update the Luma3DS files on the SD Card. Se você inicializar o dispositivo sem um cartão SD, ele usará qualquer versão que você colocou na CTR NAND.    
{% endcapture %}

<div class="notice--info">{{ notice-10 | markdownify }}</div>

{% capture notice-6 %}   
You will now boot a Custom Firmware based SysNAND by default.    
You can now hold (Select) on boot to launch the Luma3DS configuration menu.    
You can now hold (Start) on boot to launch Hourglass9, an arm9loaderhax safe multipurpose NAND and cartridge tool.     
{% endcapture %}

<div class="notice--info">{{ notice-6 | markdownify }}</div>

You can update your arm9loaderhax installation in the future by following the instructions on the [Updating A9LH](updating-a9lh) page.
{: .notice--info}

To use [NTR CFW](https://github.com/44670/BootNTR/), get `ntr.bin` from the appropriate `.zip` on [this](https://github.com/44670/BootNTR/releases) page and copy it to the root of your SD card, then install `BootNTR.cia` from [this](https://github.com/astronautlevel2/BootNTR/releases/latest) page.
{: .notice--info}

Keep your `NANDmin.bin` file, it can be restored by Hourglass9 to save you from a brick in the future.
{: .notice--info}

You can remove your NAND backups from `/files9/` as long as you still have them backed up to a safe location.
{: .notice--info}

{% capture notice-7 %}
**You can remove any extra files and folders from the root of the SD card that are *not* in the following list:**

    + 3ds
    + files9
    + hblauncherloader
    + luma
    + Nintendo 3DS
    + arm9loaderhax.bin
    + boot.3dsx

{% endcapture %}

<div class="notice--info">{{ notice-7 | markdownify }}</div>

For information on changing your device to another region, check out the [Region Changing](region-changing) page.
{: .notice--success}

For information on keeping your A9LH installation up to date, check out the [Updating A9LH](updating-a9lh) page.
{: .notice--success}

For information on using Luma3DS's various features, check out [its wiki](https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage).
{: .notice--success}