Commit graph

11 commits

Author SHA1 Message Date
LDj3SNuD
430ba6da65
CPU (A64): Add Pmull_V Inst. with Clmul fast path for the "1/2D -> 1Q" variant & Sse fast path and slow path for both the "8/16B -> 8H" and "1/2D -> 1Q" variants; with Test. (#1817)
* Add Pmull_V Sse fast path only, both "8/16B -> 8H" and "1/2D -> 1Q" variants; with Test.

* Add Clmul fast path for the 128 bits variant.

* Small optimisation (save 60 instructions) for the Sse fast path about the 128 bits variant.

* Add slow path, both variants. Fix V128 Shl/Shr when shift = 0.

* A32: Add Vmull_I P64 variant (slow path); not tested.

* A32: Add Vmull_I_P8_P64 Test and fix P64 variant.
2021-01-04 23:45:54 +01:00
LDj3SNuD
8a33e884f8
Fix Vnmls_S fast path (F64: losing input d value). Fix Vnmla_S & Vnmls_S slow paths (using fused inst.s). Fix Vfma_V slow path not using StandardFPSCRValue(). (#1775)
* Fix Vnmls_S fast path (F64: losing input d value). Fix Vnmla_S & Vnmls_S slow paths (using fused inst.s).

Add Vfma_S & Vfms_S Fma fast paths.
Add Vfnma_S inst. with Fma/Sse fast paths and slow path.
Add Vfnms_S Sse fast path.

Add Tests for affected inst.s.

Nits.

* InternalVersion = 1775

* Nits.

* Fix Vfma_V slow path not using StandardFPSCRValue().

* Nit: Fix Vfma_V order.

* Add Vfms_V Sse fast path and slow path.

* Add Vfma_V and Vfms_V Test.
2020-12-17 20:43:41 +01:00
sharmander
3332b29f01
CPU: Implement VFMA (Vector) (#1762)
* Implement VFMA.F64

* Simplify switch

* Simplify FMA Instructions into their own IntrinsicType.

* Remove whitespace

* Fix indentation

* Change tests for Vfnms -- disable inf / nan

* Move args up, not description ;)

* Implementation Complete.

All Tests Pass (Slow / Fast Path)

* Move location of function in assembler + test updates.

* Shift params upwards

* Remove unused function

* Update PTC version.

* Add comments / re-oreder opcode table.

* Remove whitespace

* Fix nit

* Fix nit.

* Fix whitespace

* Wrong opcode was used by a bad merge.

* Addressed rip's comments.
2020-12-15 00:01:52 -03:00
sharmander
36f6bbf5b9
CPU: Implement VFNMA.F32 | F.64 (#1783)
* Implement VFNMA.F<32/64>

* Update PTC Version

* Update Implementation & Renames & Correct Order

* Fix alignment

* Update implementation to not trigger assert

* Actually use the intrinsic that makes sense :)
2020-12-07 21:04:01 -03:00
sharmander
b479a43939
CPU: Implement VFNMS.F32/64 (#1758)
* Add necessary methods / op-code

* Enable Support for FMA Instruction Set

* Add Intrinsics / Assembly Opcodes for VFMSUB231XX.

* Add X86 Instructions for VFMSUB231XX

* Implement VFNMS

* Implement VFNMS Tests

* Add special cases for FMA instructions.

* Update PPTC Version

* Remove unused Op

* Move Check into Assert / Cleanup

* Rename and cleanup

* Whitespace

* Whitespace / Rename

* Re-sort

* Address final requests

* Implement VFMA.F64

* Simplify switch

* Simplify FMA Instructions into their own IntrinsicType.

* Remove whitespace

* Fix indentation

* Change tests for Vfnms -- disable inf / nan

* Move args up, not description ;)

* Undo vfma

* Completely remove vfms code.,

* Fix order of instruction in assembler
2020-12-03 20:20:02 +01:00
LDj3SNuD
e36e97c64d
CPU: This PR fixes Fpscr, among other things. (#1433)
* CPU: This PR fixes Fpscr, among other things.

* Add Fpscr.Qc = 1 if sat. for Vqrshrn & Vqrshrun.

* Fix Vcmp & Vcmpe opcode table.

* Revert "Fix Vcmp & Vcmpe opcode table."

This reverts commit c117d9410d.

* Address PR feedbacks.
2020-08-08 17:18:51 +02:00
Valentin PONS
3af2ce74ec
Implements some 32-bit instructions (VBIC, VTST, VSRA) (#1192)
* Added some 32 bits instructions:

* VBIC
* VTST
* VSRA

* Incremented the PTC

* Add tests and fix implementation

* Fixed VBIC immediate opcode mapping

* Hey hey!

* Nit.

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: LDj3SNuD <dvitiello@gmail.com>
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
2020-07-19 15:11:58 -03:00
LDj3SNuD
88619d71b8
CPU: A32: Add Vadd & Vsub Wide (S/U_8/16/32) Inst.s with Test. (#1390) 2020-07-17 14:21:40 +10:00
riperiperi
9a49f8aec9
Fix VMVN (immediate), Add VPMIN, VPMAX, VMVN (register) (#1303)
* Add Vmvn (register), tests for both Vmvn variants.

* Add Vpmin, Vpmax, improve Non-FastFp accuracy for Vpadd

* Rebase on top of PTC.

* Add Nopcode

* Increment PTC version.

* Fix nits.
2020-06-24 10:43:44 +10:00
gdkchan
c26f3774bd
Implement VMULL, VMLSL, VRSHR, VQRSHRN, VQRSHRUN AArch32 instructions + other fixes (#977)
* Implement VMULL, VMLSL, VQRSHRN, VQRSHRUN AArch32 instructions plus other fixes

* Re-align opcode table

* Re-enable undefined, use subclasses to fix checks

* Add test and fix VRSHR instruction

* PR feedback
2020-03-11 11:49:27 +11:00
riperiperi
b1b6f294f2
Add most of the A32 instruction set to ARMeilleure (#897)
* Implement TEQ and MOV (Imm16)

* Initial work on A32 instructions + SVC. No tests yet, hangs in rtld.

* Implement CLZ, fix BFI and BFC

Now stops on SIMD initialization.

* Exclusive access instructions, fix to mul, system instructions.

Now gets to a break after SignalProcessWideKey64.

* Better impl of UBFX, add UDIV and SDIV

Now boots way further - now stuck on VMOV instruction.

* Many more instructions, start on SIMD and testing framework.

* Fix build issues

* svc: Rework 32 bit codepath

Fixing once and for all argument ordering issues.

* Fix 32 bits stacktrace

* hle debug: Add 32 bits dynamic section parsing

* Fix highCq mode, add many tests, fix some instruction bugs

Still suffers from critical malloc failure 😩

* Fix incorrect opcode decoders and a few more instructions.

* Add a few instructions and fix others. re-disable highCq for now.

Disabled the svc memory clear since i'm not sure about it.

* Fix build

* Fix typo in ordered/exclusive stores.

* Implement some more instructions, fix others.

Uxtab16/Sxtab16 are untested.

* Begin impl of pairwise, some other instructions.

* Add a few more instructions, a quick hack to fix svcs for now.

* Add tests and fix issues with VTRN, VZIP, VUZP

* Add a few more instructions, fix Vmul_1 encoding.

* Fix way too many instruction bugs, add tests for some of the more important ones.

* Fix HighCq, enable FastFP paths for some floating point instructions

(not entirely sure why these were disabled, so important to note this
commit exists)

Branching has been removed in A32 shifts until I figure out if it's
worth it

* Cleanup Part 1

There should be no functional change between these next few commits.
Should is the key word. (except for removing break handler)

* Implement 32 bits syscalls

Co-authored-by: riperiperi <rhy3756547@hotmail.com>

Implement all 32 bits counterparts of the 64 bits syscalls we currently
have.

* Refactor part 2: Move index/subindex logic to Operand

May have inadvertently fixed one (1) bug

* Add FlushProcessDataCache32

* Address jd's comments

* Remove 16 bit encodings from OpCodeTable

Still need to catch some edge cases (operands that use the "F" flag) and
make Q encodings with non-even indexes undefined.

* Correct Fpscr handling for FP vector slow paths

WIP

* Add StandardFPSCRValue behaviour for all Arithmetic instructions

* Add StandardFPSCRValue behaviour to compare instructions.

* Force passing of fpcr to FPProcessException and FPUnpack.

Reduces potential for code error significantly

* OpCode cleanup

* Remove urgency from DMB comment in MRRC

DMB is currently a no-op via the instruction, so it should likely still
be a no-op here.

* Test Cleanup

* Fix FPDefaultNaN on Ryzen CPUs

* Improve some tests, fix some shift instructions, add slow path for Vadd

* Fix Typo

* More test cleanup

* Flip order of Fx and index, to indicate that the operand's is the "base"

* Remove Simd32 register type, use Int32 and Int64 for scalars like A64 does.

* Reintroduce alignment to DecoderHelper (removed by accident)

* One more realign as reading diffs is hard

* Use I32 registers in A32 (part 2)

Swap default integer register type based on current execution mode.

* FPSCR flags as Registers (part 1)

Still need to change NativeContext and ExecutionContext to allow
getting/setting with the flag values.

* Use I32 registers in A32 (part 1)

* FPSCR flags as registers (part 2)

Only CMP flags are on the registers right now. It could be useful to use
more of the space in non-fast-float when implementing A32 flags
accurately in the fast path.

* Address Feedback

* Correct FP->Int behaviour (should saturate)

* Make branches made by writing to PC eligible for Rejit

Greatly improves performance in most games.

* Remove unused branching for Vtbl

* RejitRequest as a class rather than a tuple

Makes a lot more sense than storing tuples on a dictionary.

* Add VMOVN, VSHR (imm), VSHRN (imm) and related tests

* Re-order InstEmitSystem32

Alphabetical sorting.

* Address Feedback

Feedback from Ac_K, remove and sort usings.

* Address Feedback 2

* Address Feedback from LDj3SNuD

Opcode table reordered to have alphabetical sorting within groups,
Vmaxnm and Vminnm have split names to be less ambiguous, SoftFloat nits,
Test nits and Test simplification with ValueSource.

* Add Debug Asserts to A32 helpers

Mainly to prevent the shift ones from being used on I64 operands, as
they expect I32 input for most operations (eg. carry flag setting), and
expect I32 input for shift and boolean amounts. Most other helper
functions don't take Operands, throw on out of range values, and take
specific types of OpCode, so didn't need any asserts.

* Use ConstF rather than creating an operand.

(useful for pooling in future)

* Move exclusive load to helper, reference call flag rather than literal 1.

* Address LDj feedback (minus table flatten)

one final look before it's all gone. the world is so beautiful.

* Flatten OpCodeTable

oh no

* Address more table ordering

* Call Flag as int on A32

Co-authored-by: Natalie C. <cyuubiapps@gmail.com>
Co-authored-by: Thog <thog@protonmail.com>
2020-02-24 08:20:40 +11:00