Commit graph

12 commits

Author SHA1 Message Date
sharmander
36f6bbf5b9
CPU: Implement VFNMA.F32 | F.64 (#1783)
* Implement VFNMA.F<32/64>

* Update PTC Version

* Update Implementation & Renames & Correct Order

* Fix alignment

* Update implementation to not trigger assert

* Actually use the intrinsic that makes sense :)
2020-12-07 21:04:01 -03:00
LDj3SNuD
567ea726e1
Add support for guest Fz (Fpcr) mode through host Ftz and Daz (Mxcsr) modes (fast paths). (#1630)
* Add support for guest Fz (Fpcr) mode through host Ftz and Daz (Mxcsr) modes (fast paths).

* Ptc.InternalVersion = 1630

* Nits.

* Address comments.

* Update Ptc.cs

* Address comment.
2020-12-07 10:37:07 +01:00
sharmander
b479a43939
CPU: Implement VFNMS.F32/64 (#1758)
* Add necessary methods / op-code

* Enable Support for FMA Instruction Set

* Add Intrinsics / Assembly Opcodes for VFMSUB231XX.

* Add X86 Instructions for VFMSUB231XX

* Implement VFNMS

* Implement VFNMS Tests

* Add special cases for FMA instructions.

* Update PPTC Version

* Remove unused Op

* Move Check into Assert / Cleanup

* Rename and cleanup

* Whitespace

* Whitespace / Rename

* Re-sort

* Address final requests

* Implement VFMA.F64

* Simplify switch

* Simplify FMA Instructions into their own IntrinsicType.

* Remove whitespace

* Fix indentation

* Change tests for Vfnms -- disable inf / nan

* Move args up, not description ;)

* Undo vfma

* Completely remove vfms code.,

* Fix order of instruction in assembler
2020-12-03 20:20:02 +01:00
LDj3SNuD
0679084f11
CPU (A64): Add FP16/FP32 fast paths (F16C Intrinsics) for Fcvt_S, Fcvtl_V & Fcvtn_V Instructions. Now HardwareCapabilities uses CpuId. (#1650)
* net5.0

* CPU (A64): Add FP16/FP32 fast paths (F16C Intrinsics) for Fcvt_S, Fcvtl_V & Fcvtn_V Instructions. Switch to .NET 5.0.

Nits.

Tests performed successfully in both debug and release mode (for all instructions involved).

* Address comment.

* Update appveyor.yml

* Revert "Update appveyor.yml"

This reverts commit 27cdd59e8b.

* Remove Assembler CpuId.

* Update appveyor.yml

* Address comment.
2020-11-18 19:35:54 +01:00
gdkchan
9878fc2d3c
Implement inline memory load/store exclusive and ordered (#1413)
* Implement inline memory load/store exclusive

* Fix missing REX prefix on 8-bits CMPXCHG

* Increment PTC version due to bugfix

* Remove redundant memory checks

* Address PR feedback

* Increment PPTC version
2020-07-30 11:29:28 -03:00
riperiperi
d7044b10a2
Add SSE4.2 Path for CRC32, add A32 variant, add tests for non-castagnoli variants. (#1328)
* Add CRC32 A32 instructions.

* Fix CRC32 instructions.

* Add CRC intrinsic and fast path.

Loop is currently unrolled, will look into adding temp vars after tests are added.

* Begin work on Crc tests

* Fix SSE4.2 path for CRC32C, finialize tests.

* Remove unused IR path.

* Fix spacing between prefix checks.

* This should be Src.

* PTC Version

* OpCodeTable Order

* Integer check improvement. Value and Crc can be either 32 or 64 size.

* This wasn't necessary...

* If size is 3, value type must be I64.

* Fix same src+dest handling for non crc intrinsics.

* Pre-fix (ha) issue with vex encodings
2020-07-13 20:48:14 +10:00
merry
f8cd072b62
Faster crc32 implementation (#1294)
* Add Pclmulqdq intrinsic

* Implement crc32 in terms of pclmulqdq

* Address PR comments
2020-06-05 20:58:27 +10:00
riperiperi
f695a215ad
Add Fast Paths for Crypto instructions (A32/A64) (#1026)
* Add Fast Paths for Crypto instructions (A32/A64)

* Replace additional XOR with passing in const zero.
2020-03-25 17:20:29 +11:00
riperiperi
d904706fc0
Use a Jump Table for direct and indirect calls/jumps, removing transitions to managed (#975)
* Implement Jump Table for Native Calls

NOTE: this slows down rejit considerably! Not recommended to be used
without codegen optimisation or AOT.

- Does not work on Linux
- A32 needs an additional commit.

* A32 Support

(WIP)

* Actually write Direct Call pointers to the table

That would help.

* Direct Calls: Rather than returning to the translator, attempt to keep within the native stack frame.

A return to the translator can still happen, but only by exceptionally
bubbling up to it.

Also:
- Always translate lowCq as a function. Faster interop with the direct
jumps, and this will be useful in future if we want to do speculative
translation.
- Tail Call Detection: after the decoding stage, detect if we do a tail
call, and avoid translating into it. Detected if a jump is made to an
address outwith the contiguous sequence of blocks surrounding the entry
point. The goal is to reduce code touched by jit and rejit.

* A32 Support

* Use smaller max function size for lowCq, fix exceptional returns

When a return has an unexpected value and there is no code block
following this one, we now return the value rather than continuing.

* CompareAndSwap (buggy)

* Ensure CompareAndSwap does not get optimized away.

* Use CompareAndSwap to make the dynamic table thread safe.

* Tail call for linux, throw on too many arguments.

* Combine CompareAndSwap 128 and 32/64.

They emit different IR instructions since their PreAllocator behaviour
is different, but now they just have one function on EmitterContext.

* Fix issues separating from optimisations.

* Use a stub to find and execute missing functions.

This allows us to skip doing many runtime comparisons and branches, and reduces the amount of code we need to emit significantly.

For the indirect call table, this stub also does the work of moving in the highCq address to the table when one is found.

* Make Jump Tables and Jit Cache dynmically resize

Reserve virtual memory, commit as needed.

* Move TailCallRemover to its own class.

* Multithreaded Translation (based on heuristic)

A poor one, at that. Need to get core count for a better one, which
means a lot of OS specific garbage.

* Better priority management for background threads.

* Bound core limit a bit more

Past a certain point the load is not paralellizable and starts stealing from the main thread. Likely due to GC, memory, heap allocation thread contention. Reduce by one core til optimisations come to improve the situation.

* Fix memory management on linux.

* Temporary solution to some sync problems.

This will make sure threads exit correctly, most of the time. There is a potential race where setting the sync counter to 0 does nothing (counter stays at what it was before, thread could take too long to exit), but we need to find a better way to do this anyways. Synchronization frequency has been tightened as we never enter blockwise segments of code. Essentially this means, check every x functions or loop iterations, before lowcq blocks existed and were worth just as much. Ideally it should be done in a better way, since functions can be anywhere from 1 to 5000 instructions. (maybe based on host timer, or an interrupt flag from a scheduler thread)

* Address feedback minus CompareAndSwap change.

* Use default ReservedRegion granularity.

* Merge CompareAndSwap with its V128 variant.

* We already got the source, no need to do it again.

* Make sure all background translation threads exit.

* Fix CompareAndSwap128

Detection criteria was a bit scuffed.

* Address Comments.
2020-03-12 14:20:55 +11:00
LDj3SNuD
0915731a9d Implemented fast paths for: (#846)
* opt

* Nit.

* opt_p2

* Nit.
2019-12-29 22:22:47 -03:00
LDj3SNuD
8c85bdf2ed Implemented fast paths for: (#841)
* cpu-misc_opt

* B = ~b

* ;
2019-12-07 13:45:32 +01:00
gdkchan
a731ab3a2a Add a new JIT compiler for CPU code (#693)
* Start of the ARMeilleure project

* Refactoring around the old IRAdapter, now renamed to PreAllocator

* Optimize the LowestBitSet method

* Add CLZ support and fix CLS implementation

* Add missing Equals and GetHashCode overrides on some structs, misc small tweaks

* Implement the ByteSwap IR instruction, and some refactoring on the assembler

* Implement the DivideUI IR instruction and fix 64-bits IDIV

* Correct constant operand type on CSINC

* Move division instructions implementation to InstEmitDiv

* Fix destination type for the ConditionalSelect IR instruction

* Implement UMULH and SMULH, with new IR instructions

* Fix some issues with shift instructions

* Fix constant types for BFM instructions

* Fix up new tests using the new V128 struct

* Update tests

* Move DIV tests to a separate file

* Add support for calls, and some instructions that depends on them

* Start adding support for SIMD & FP types, along with some of the related ARM instructions

* Fix some typos and the divide instruction with FP operands

* Fix wrong method call on Clz_V

* Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes

* Implement SIMD logical instructions and more misc. fixes

* Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations

* Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes

* Implement SIMD shift instruction and fix Dup_V

* Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table

* Fix check with tolerance on tester

* Implement FP & SIMD comparison instructions, and some fixes

* Update FCVT (Scalar) encoding on the table to support the Half-float variants

* Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes

* Use old memory access methods, made a start on SIMD memory insts support, some fixes

* Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes

* Fix arguments count with struct return values, other fixes

* More instructions

* Misc. fixes and integrate LDj3SNuD fixes

* Update tests

* Add a faster linear scan allocator, unwinding support on windows, and other changes

* Update Ryujinx.HLE

* Update Ryujinx.Graphics

* Fix V128 return pointer passing, RCX is clobbered

* Update Ryujinx.Tests

* Update ITimeZoneService

* Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks

* Use generic GetFunctionPointerForDelegate method and other tweaks

* Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics

* Remove some unused code on the assembler

* Fix REX.W prefix regression on float conversion instructions, add some sort of profiler

* Add hardware capability detection

* Fix regression on Sha1h and revert Fcm** changes

* Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator

* Fix silly mistake introduced on last commit on CpuId

* Generate inline stack probes when the stack allocation is too large

* Initial support for the System-V ABI

* Support multiple destination operands

* Fix SSE2 VectorInsert8 path, and other fixes

* Change placement of XMM callee save and restore code to match other compilers

* Rename Dest to Destination and Inst to Instruction

* Fix a regression related to calls and the V128 type

* Add an extra space on comments to match code style

* Some refactoring

* Fix vector insert FP32 SSE2 path

* Port over the ARM32 instructions

* Avoid memory protection races on JIT Cache

* Another fix on VectorInsert FP32 (thanks to LDj3SNuD

* Float operands don't need to use the same register when VEX is supported

* Add a new register allocator, higher quality code for hot code (tier up), and other tweaks

* Some nits, small improvements on the pre allocator

* CpuThreadState is gone

* Allow changing CPU emulators with a config entry

* Add runtime identifiers on the ARMeilleure project

* Allow switching between CPUs through a config entry (pt. 2)

* Change win10-x64 to win-x64 on projects

* Update the Ryujinx project to use ARMeilleure

* Ensure that the selected register is valid on the hybrid allocator

* Allow exiting on returns to 0 (should fix test regression)

* Remove register assignments for most used variables on the hybrid allocator

* Do not use fixed registers as spill temp

* Add missing namespace and remove unneeded using

* Address PR feedback

* Fix types, etc

* Enable AssumeStrictAbiCompliance by default

* Ensure that Spill and Fill don't load or store any more than necessary
2019-08-08 21:56:22 +03:00