* Turn `MemoryOperand` into a struct
* Remove `IntrinsicOperation`
* Remove `PhiNode`
* Remove `Node`
* Turn `Operand` into a struct
* Turn `Operation` into a struct
* Clean up pool management methods
* Add `Arena` allocator
* Move `OperationHelper` to `Operation.Factory`
* Move `OperandHelper` to `Operand.Factory`
* Optimize `Operation` a bit
* Fix `Arena` initialization
* Rename `NativeList<T>` to `ArenaList<T>`
* Reduce `Operand` size from 88 to 56 bytes
* Reduce `Operation` size from 56 to 40 bytes
* Add optimistic interning of Register & Constant operands
* Optimize `RegisterUsage` pass a bit
* Optimize `RemoveUnusedNodes` pass a bit
Iterating in reverse-order allows killing dependency chains in a single
pass.
* Fix PPTC symbols
* Optimize `BasicBlock` a bit
Reduce allocations from `_successor` & `DominanceFrontiers`
* Fix `Operation` resize
* Make `Arena` expandable
Change the arena allocator to be expandable by allocating in pages, with
some of them being pooled. Currently 32 pages are pooled. An LRU removal
mechanism should probably be added to it.
Apparently MHR can allocate bitmaps large enough to exceed the 16MB
limit for the type.
* Move `Arena` & `ArenaList` to `Common`
* Remove `ThreadStaticPool` & co
* Add `PhiOperation`
* Reduce `Operand` size from 56 from 48 bytes
* Add linear-probing to `Operand` intern table
* Optimize `HybridAllocator` a bit
* Add `Allocators` class
* Tune `ArenaAllocator` sizes
* Add page removal mechanism to `ArenaAllocator`
Remove pages which have not been used for more than 5s after each reset.
I am on fence if this would be better using a Gen2 callback object like
the one in System.Buffers.ArrayPool<T>, to trim the pool. Because right
now if a large translation happens, the pages will be freed only after a
reset. This reset may not happen for a while because no new translation
is hit, but the arena base sizes are rather small.
* Fix `OOM` when allocating larger than page size in `ArenaAllocator`
Tweak resizing mechanism for Operand.Uses and Assignemnts.
* Optimize `Optimizer` a bit
* Optimize `Operand.Add<T>/Remove<T>` a bit
* Clean up `PreAllocator`
* Fix phi insertion order
Reduce codegen diffs.
* Fix code alignment
* Use new heuristics for degree of parallelism
* Suppress warnings
* Address gdkchan's feedback
Renamed `GetValue()` to `GetValueUnsafe()` to make it more clear that
`Operand.Value` should usually not be modified directly.
* Add fast path to `ArenaAllocator`
* Assembly for `ArenaAllocator.Allocate(ulong)`:
.L0:
mov rax, [rcx+0x18]
lea r8, [rax+rdx]
cmp r8, [rcx+0x10]
ja short .L2
.L1:
mov rdx, [rcx+8]
add rax, [rdx+8]
mov [rcx+0x18], r8
ret
.L2:
jmp ArenaAllocator.AllocateSlow(UInt64)
A few variable/field had to be changed to ulong so that RyuJIT avoids
emitting zero-extends.
* Implement a new heuristic to free pooled pages.
If an arena is used often, it is more likely that its pages will be
needed, so the pages are kept for longer (e.g: during PPTC rebuild or
burst sof compilations). If is not used often, then it is more likely
that its pages will not be needed (e.g: after PPTC rebuild or bursts
of compilations).
* Address riperiperi's feedback
* Use `EqualityComparer<T>` in `IntrusiveList<T>`
Avoids a potential GC hole in `Equals(T, T)`.
* Implement VCNT based on AArch64 CNT
Add tests
* Update PTC version
* Address LDj's comments
* Explicit size in encoding
* Tighter tests
* Replace SoftFallback with IR helper
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Reduce one BitwiseAnd from IR fallback
Based on popcount64b from https://en.wikipedia.org/wiki/Hamming_weight#Efficient_implementation
* Rename parameter and add assert
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Add VCLZ fast path
* Add VCLZ.8B/16B SSSE3 fast path
* Add VCLZ.4H/8H SSSE3 fast path
* Add VCLZ.2S/4S SSE2 fast path
* Improve CLZ.4H/8H fast path
* Improve CLZ.2S/4S fast path
* Set PPTC version
* Add Pmull_V Sse fast path only, both "8/16B -> 8H" and "1/2D -> 1Q" variants; with Test.
* Add Clmul fast path for the 128 bits variant.
* Small optimisation (save 60 instructions) for the Sse fast path about the 128 bits variant.
* Add slow path, both variants. Fix V128 Shl/Shr when shift = 0.
* A32: Add Vmull_I P64 variant (slow path); not tested.
* A32: Add Vmull_I_P8_P64 Test and fix P64 variant.
* Add Fmax/minv_V & S/Ushl_S Inst.s with Tests. Fix Maxps/d & Minps/d double zero sign handling. Allows better handling of NaNs.
* Optimized EmitSse2VectorIsNaNOpF() for multiple uses per opF.
* Delete DelegateTypes.cs
* Delete DelegateCache.cs
* Add files via upload
* Update Horizon.cs
* Update Program.cs
* Update MainWindow.cs
* Update Aot.cs
* Update RelocEntry.cs
* Update Translator.cs
* Update MemoryManager.cs
* Update InstEmitMemoryHelper.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nit.
* 10 fewer MSIL bytes for us
* Add comment. Nits.
* Update Translator.cs
* Update Aot.cs
* Nits.
* Opt..
* Opt..
* Opt..
* Opt..
* Allow to change compression level.
* Update MemoryManager.cs
* Update Translator.cs
* Manage corner cases during the save phase. Nits.
* Update Aot.cs
* Translator response tweak for Aot disabled. Nit.
* Nit.
* Nits.
* Create DelegateHelpers.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nits.
* Fix due to #784.
* Fixes due to #757 & #841.
* Fix due to #846.
* Fix due to #847.
* Use MethodInfo for managed method calls.
Use IR methods instead of managed methods about Max/Min (S/U).
Follow-ups & Nits.
* Add missing exception messages.
Reintroduce slow path for Fmov_Vi.
Implement slow path for Fmov_Si.
* Switch to the new folder structure.
Nits.
* Impl. index-based relocation information. Impl. cache file version field.
* Nit.
* Address gdkchan comments.
Mainly:
- fixed cache file corruption issue on exit; - exposed a way to disable AOT on the GUI.
* Address AcK77 comment.
* Address Thealexbarney, jduncanator & emmauss comments.
Header magic, CpuId (FI) & Aot -> Ptc.
* Adaptation to the new application reloading system.
Improvements to the call system of managed methods.
Follow-ups.
Nits.
* Get the same boot times as on master when PTC is disabled.
* Profiled Aot.
* A32 support (#897).
* #975 support (1 of 2).
* #975 support (2 of 2).
* Rebase fix & nits.
* Some fixes and nits (still one bug left).
* One fix & nits.
* Tests fix (by gdk) & nits.
* Support translations not only in high quality and rejit.
Nits.
* Added possibility to skip translations and continue execution, using `ESC` key.
* Update SettingsWindow.cs
* Update GLRenderer.cs
* Update Ptc.cs
* Disabled Profiled PTC by default as requested in the past by gdk.
* Fix rejit bug. Increased number of parallel translations. Add stack unwinding stuffs support (1 of 2).
Nits.
* Add stack unwinding stuffs support (2 of 2). Tuned number of parallel translations.
* Restored the ability to assemble jumps with 8-bit offset when Profiled PTC is disabled or during profiling.
Modifications due to rebase.
Nits.
* Limited profiling of the functions to be translated to the addresses belonging to the range of static objects only.
* Nits.
* Nits.
* Update Delegates.cs
* Nit.
* Update InstEmitSimdArithmetic.cs
* Address riperiperi comments.
* Fixed the issue of unjustifiably longer boot times at the second boot than at the first boot, measured at the same time or reference point and with the same number of translated functions.
* Implemented a simple redundant load/save mechanism.
Halved the value of Decoder.MaxInstsPerFunction more appropriate for the current performance of the Translator.
Replaced by Logger.PrintError to Logger.PrintDebug in TexturePool.cs about the supposed invalid texture format to avoid the spawn of the log.
Nits.
* Nit.
Improved Logger.PrintError in TexturePool.cs to avoid log spawn.
Added missing code for FZ handling (in output) for fp max/min instructions (slow paths).
* Add configuration migration for PTC
Co-authored-by: Thog <me@thog.eu>
* Begin work on A32 SIMD Intrinsics
* More instructions, some cleanup.
* Intrinsics for Move instructions (zip etc)
These pass the existing tests.
* Intrinsics for some of Cvt
While doing this I noticed that the conversion for int/fp was incorrect
in the slow path. I'll fix this in the original repo.
* Intrinsics for more Arithmetic instructions.
* Intrinsics for Vext
* Fix VEXT Intrinsic for double words.
* Use InsertPs to move scalar values.
* Cleanup, fix VPADD.f32 and VMIN signed integer.
* Cleanup, add SSE2 support for scalar insert.
Works similarly to the IR scalar insert, but obviously this one works
directly on V128.
* Minor cleanup.
* Enable intrinsic for FP64 to integer conversion.
* Address feedback apart from splitting out intrinsic float abs
Also: bad VREV encodings as undefined rather than throwing in translation.
* Move float abs to helper, fix bug with cvt
* Rename opc2 & 3 to match A32 docs, use ArgumentOutOfRangeException appropriately.
* Get name of variable at compilation rather than string literal.
* Use correct double sign mask.
* Start of the ARMeilleure project
* Refactoring around the old IRAdapter, now renamed to PreAllocator
* Optimize the LowestBitSet method
* Add CLZ support and fix CLS implementation
* Add missing Equals and GetHashCode overrides on some structs, misc small tweaks
* Implement the ByteSwap IR instruction, and some refactoring on the assembler
* Implement the DivideUI IR instruction and fix 64-bits IDIV
* Correct constant operand type on CSINC
* Move division instructions implementation to InstEmitDiv
* Fix destination type for the ConditionalSelect IR instruction
* Implement UMULH and SMULH, with new IR instructions
* Fix some issues with shift instructions
* Fix constant types for BFM instructions
* Fix up new tests using the new V128 struct
* Update tests
* Move DIV tests to a separate file
* Add support for calls, and some instructions that depends on them
* Start adding support for SIMD & FP types, along with some of the related ARM instructions
* Fix some typos and the divide instruction with FP operands
* Fix wrong method call on Clz_V
* Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes
* Implement SIMD logical instructions and more misc. fixes
* Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations
* Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes
* Implement SIMD shift instruction and fix Dup_V
* Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table
* Fix check with tolerance on tester
* Implement FP & SIMD comparison instructions, and some fixes
* Update FCVT (Scalar) encoding on the table to support the Half-float variants
* Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes
* Use old memory access methods, made a start on SIMD memory insts support, some fixes
* Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes
* Fix arguments count with struct return values, other fixes
* More instructions
* Misc. fixes and integrate LDj3SNuD fixes
* Update tests
* Add a faster linear scan allocator, unwinding support on windows, and other changes
* Update Ryujinx.HLE
* Update Ryujinx.Graphics
* Fix V128 return pointer passing, RCX is clobbered
* Update Ryujinx.Tests
* Update ITimeZoneService
* Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks
* Use generic GetFunctionPointerForDelegate method and other tweaks
* Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics
* Remove some unused code on the assembler
* Fix REX.W prefix regression on float conversion instructions, add some sort of profiler
* Add hardware capability detection
* Fix regression on Sha1h and revert Fcm** changes
* Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator
* Fix silly mistake introduced on last commit on CpuId
* Generate inline stack probes when the stack allocation is too large
* Initial support for the System-V ABI
* Support multiple destination operands
* Fix SSE2 VectorInsert8 path, and other fixes
* Change placement of XMM callee save and restore code to match other compilers
* Rename Dest to Destination and Inst to Instruction
* Fix a regression related to calls and the V128 type
* Add an extra space on comments to match code style
* Some refactoring
* Fix vector insert FP32 SSE2 path
* Port over the ARM32 instructions
* Avoid memory protection races on JIT Cache
* Another fix on VectorInsert FP32 (thanks to LDj3SNuD
* Float operands don't need to use the same register when VEX is supported
* Add a new register allocator, higher quality code for hot code (tier up), and other tweaks
* Some nits, small improvements on the pre allocator
* CpuThreadState is gone
* Allow changing CPU emulators with a config entry
* Add runtime identifiers on the ARMeilleure project
* Allow switching between CPUs through a config entry (pt. 2)
* Change win10-x64 to win-x64 on projects
* Update the Ryujinx project to use ARMeilleure
* Ensure that the selected register is valid on the hybrid allocator
* Allow exiting on returns to 0 (should fix test regression)
* Remove register assignments for most used variables on the hybrid allocator
* Do not use fixed registers as spill temp
* Add missing namespace and remove unneeded using
* Address PR feedback
* Fix types, etc
* Enable AssumeStrictAbiCompliance by default
* Ensure that Spill and Fill don't load or store any more than necessary
