Commit graph

84 commits

Author SHA1 Message Date
lat9nq
387ede76d2 general: Convert use_docked_mode to an enumeration
Allows some special interactions with it in the Qt frontend.
2023-08-22 16:07:52 -04:00
lat9nq
d146dd9d12 settings,general: Rename non-confirming enums 2023-07-21 10:56:54 -04:00
lat9nq
432f68ad29 configure_audio: Implement ui generation
Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.

general: Partial audio config implmentation

configure_audio: Implement ui generation

Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.

general: Partial audio config implmentation

settings: Make audio settings as enums
2023-07-21 10:56:07 -04:00
lat9nq
a007ac6b9c configure_graphics_advance: Generate UI at runtime
We can iterate through the AdvancedGraphics settings and generate the UI
during runtime. This doesn't help runtime efficiency, but it helps a ton
in reducing the amount of work a developer needs in order to add a new
setting.
2023-07-21 10:56:07 -04:00
lat9nq
5cffa34288 settings,video_core: Consolidate ASTC decoding options
Just puts them all neatly into one place.
2023-07-21 10:56:07 -04:00
lat9nq
2528cf7c54 settings: Enable FIFO relaxed
Not entirely sure if we need this, but there's also no reason not to
support it.

settings: Give VSyncMode values
2023-05-02 21:51:30 -04:00
lat9nq
40f062f749 telemetry_session: Make translate function static
Addresses review feedback

Co-authored-by: Lioncash <mathew1800@gmail.com>
2023-05-02 21:51:29 -04:00
lat9nq
6f0929df82 configuration: Expose separate swap present modes
Previously, yuzu would try and guess which vsync mode to use given
different scenarios, but apparently we didn't always get it right. This
exposes the separate modes in a drop-down the user can select.

If a mode isn't available in Vulkan, it defaults to FIFO.
2023-05-02 21:51:29 -04:00
arades79
683019878f remove static from pointer sized or smaller types for aesthetics, change constexpr static to static constexpr for consistency
Signed-off-by: arades79 <scravers@protonmail.com>
2023-02-14 12:35:39 -05:00
arades79
45e13b03f3 add static lifetime to constexpr values to force compile time evaluation where possible
Signed-off-by: arades79 <scravers@protonmail.com>
2023-02-14 12:33:11 -05:00
Liam
89dd7dc180 video_core: add null backend 2022-11-28 19:49:09 -05:00
Andrea Pappacoda
cdb240f3d4
chore: make yuzu REUSE compliant
[REUSE] is a specification that aims at making file copyright
information consistent, so that it can be both human and machine
readable. It basically requires that all files have a header containing
copyright and licensing information. When this isn't possible, like
when dealing with binary assets, generated files or embedded third-party
dependencies, it is permitted to insert copyright information in the
`.reuse/dep5` file.

Oh, and it also requires that all the licenses used in the project are
present in the `LICENSES` folder, that's why the diff is so huge.
This can be done automatically with `reuse download --all`.

The `reuse` tool also contains a handy subcommand that analyzes the
project and tells whether or not the project is (still) compliant,
`reuse lint`.

Following REUSE has a few advantages over the current approach:

- Copyright information is easy to access for users / downstream
- Files like `dist/license.md` do not need to exist anymore, as
  `.reuse/dep5` is used instead
- `reuse lint` makes it easy to ensure that copyright information of
  files like binary assets / images is always accurate and up to date

To add copyright information of files that didn't have it I looked up
who committed what and when, for each file. As yuzu contributors do not
have to sign a CLA or similar I couldn't assume that copyright ownership
was of the "yuzu Emulator Project", so I used the name and/or email of
the commit author instead.

[REUSE]: https://reuse.software

Follow-up to 01cf05bc75
2022-07-27 12:53:49 +02:00
Fernando Sahmkow
71ca84d829 Settings: eliminate rescaling_factor. 2021-11-16 22:11:27 +01:00
Moonlacer
44135b011f remove-audio-stretching-setting 2021-09-15 19:52:43 -05:00
ameerj
cd016d3cb5 configure_graphics: Add GPU nvdec decoding as an option
Some system configurations may see visual regressions or lower performance using GPU decoding compared to CPU decoding. This setting provides the option for users to specify their decoding preference.

Co-Authored-By: yzct12345 <87620833+yzct12345@users.noreply.github.com>
2021-08-16 14:40:53 -04:00
bunnei
d6c799494c
Merge pull request #6696 from ameerj/speed-limit-rename
general: Rename "Frame Limit" references to "Speed Limit"
2021-07-26 18:51:00 -07:00
ameerj
9dfbc9bdce general: Rename "Frame Limit" references to "Speed Limit"
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
2021-07-23 22:10:01 -04:00
lat9nq
1152d66ddd general: Add setting shader_backend
GLASM is getting good enough that we can move it out of advanced
graphics settings. This removes the setting `use_assembly_shaders`,
opting for a enum class `shader_backend`. This comes with the benefits
that it is extensible for additional shader backends besides GLSL and
GLASM, and this will work better with a QComboBox.

Qt removes the related assembly shader setting from the Advanced
Graphics section and places it as a new QComboBox in the API Settings
group. This will replace the Vulkan device selector when OpenGL is
selected.

Additionally, mark all of the custom anisotropic filtering settings as
"WILL BREAK THINGS", as that is the case with a select few games.
2021-07-22 21:51:39 -04:00
lat9nq
0e5c74bc9e core, input_common: Miscellaneous fixes
bcat: Fix settings access

telemetry_session: Fix settings accesses

So this is what I get for testing with the web service disabled.

touch_from_button: Fix settings access for clang
2021-06-28 20:56:17 -04:00
lat9nq
b91b76df4f general: Make most settings a BasicSetting
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.

Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
2021-06-28 17:32:17 -04:00
ameerj
b2955479e5 configure_graphics: Add Accelerate ASTC decoding setting 2021-06-15 20:19:00 -04:00
Morph
065867e2c2
common: fs: Rework the Common Filesystem interface to make use of std::filesystem (#6270)
* common: fs: fs_types: Create filesystem types

Contains various filesystem types used by the Common::FS library

* common: fs: fs_util: Add std::string to std::u8string conversion utility

* common: fs: path_util: Add utlity functions for paths

Contains various utility functions for getting or manipulating filesystem paths used by the Common::FS library

* common: fs: file: Rewrite the IOFile implementation

* common: fs: Reimplement Common::FS library using std::filesystem

* common: fs: fs_paths: Add fs_paths to replace common_paths

* common: fs: path_util: Add the rest of the path functions

* common: Remove the previous Common::FS implementation

* general: Remove unused fs includes

* string_util: Remove unused function and include

* nvidia_flags: Migrate to the new Common::FS library

* settings: Migrate to the new Common::FS library

* logging: backend: Migrate to the new Common::FS library

* core: Migrate to the new Common::FS library

* perf_stats: Migrate to the new Common::FS library

* reporter: Migrate to the new Common::FS library

* telemetry_session: Migrate to the new Common::FS library

* key_manager: Migrate to the new Common::FS library

* bis_factory: Migrate to the new Common::FS library

* registered_cache: Migrate to the new Common::FS library

* xts_archive: Migrate to the new Common::FS library

* service: acc: Migrate to the new Common::FS library

* applets/profile: Migrate to the new Common::FS library

* applets/web: Migrate to the new Common::FS library

* service: filesystem: Migrate to the new Common::FS library

* loader: Migrate to the new Common::FS library

* gl_shader_disk_cache: Migrate to the new Common::FS library

* nsight_aftermath_tracker: Migrate to the new Common::FS library

* vulkan_library: Migrate to the new Common::FS library

* configure_debug: Migrate to the new Common::FS library

* game_list_worker: Migrate to the new Common::FS library

* config: Migrate to the new Common::FS library

* configure_filesystem: Migrate to the new Common::FS library

* configure_per_game_addons: Migrate to the new Common::FS library

* configure_profile_manager: Migrate to the new Common::FS library

* configure_ui: Migrate to the new Common::FS library

* input_profiles: Migrate to the new Common::FS library

* yuzu_cmd: config: Migrate to the new Common::FS library

* yuzu_cmd: Migrate to the new Common::FS library

* vfs_real: Migrate to the new Common::FS library

* vfs: Migrate to the new Common::FS library

* vfs_libzip: Migrate to the new Common::FS library

* service: bcat: Migrate to the new Common::FS library

* yuzu: main: Migrate to the new Common::FS library

* vfs_real: Delete the contents of an existing file in CreateFile

Current usages of CreateFile expect to delete the contents of an existing file, retain this behavior for now.

* input_profiles: Don't iterate the input profile dir if it does not exist

Silences an error produced in the log if the directory does not exist.

* game_list_worker: Skip parsing file if the returned VfsFile is nullptr

Prevents crashes in GetLoader when the virtual file is nullptr

* common: fs: Validate paths for path length

* service: filesystem: Open the mod load directory as read only
2021-05-25 19:32:56 -04:00
bunnei
a4c6712a4b common: Move settings to common from core.
- Removes a dependency on core and input_common from common.
2021-04-14 16:24:03 -07:00
Lioncash
6f8a06bac5 patch_manager: Remove usages of the global system instance
With this, only 19 usages of the global system instance remain within
the core library.

We're almost there.
2020-11-18 09:36:48 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
ameerj
eb67a45ca8 video_core: NVDEC Implementation
This commit aims to implement the NVDEC (Nvidia Decoder) functionality, with video frame decoding being handled by the FFmpeg library.

The process begins with Ioctl commands being sent to the NVDEC and VIC (Video Image Composer) emulated devices. These allocate the necessary GPU buffers for the frame data, along with providing information on the incoming video data. A Submit command then signals the GPU to process and decode the frame data.

To decode the frame, the respective codec's header must be manually composed from the information provided by NVDEC, then sent with the raw frame data to the ffmpeg library.

Currently, H264 and VP9 are supported, with VP9 having some minor artifacting issues related mainly to the reference frame composition in its uncompressed header.

Async GPU is not properly implemented at the moment.

Co-Authored-By: David <25727384+ogniK5377@users.noreply.github.com>
2020-10-26 23:07:36 -04:00
Lioncash
f6bb905182 common/telemetry: Migrate namespace into the Common namespace
Migrates the Telemetry namespace into the Common namespace to make the
code consistent with the rest of our common code.
2020-08-18 15:08:32 -04:00
Lioncash
c4ed791164 common/fileutil: Convert namespace to Common::FS
Migrates a remaining common file over to the Common namespace, making it
consistent with the rest of common files.

This also allows for high-traffic FS related code to alias the
filesystem function namespace as

namespace FS = Common::FS;

for more concise typing.
2020-08-16 06:52:40 -04:00
David Marcec
85d7a8f466 Rebase for per game settings 2020-07-17 14:26:14 +10:00
lat9nq
63d23835ef
configuration: implement per-game configurations (#4098)
* Switch game settings to use a pointer

In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.

* configuration: add new UI without changing existing funcitonality

The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.

* configuration: Rename files

These weren't included in the last commit. Now they are.

* configuration: setup global configuration checkbox

Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.

* configuration: swap to per-game config memory for properties dialog

Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.

* configuration: change config interfaces to use config-specific pointers

When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.

* configuration: boot a game using per-game settings

Swaps values where needed to boot a game.

* configuration: user correct config during emulation

Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.

* settings: split Settings::values into two different structs

By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.

* settings: move use_docked_mode to Controls group

`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.

* configuration: Fix the other yuzu executables and a regression

In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.

* settings: use a template to duplicate memory for each setting

Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.

* configuration: correct add-ons config and swap settings when apropriate

Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.

* settings: restore old values struct

No longer needed with the Settings::Setting class template.

* configuration: implement hierarchical game properties dialog

This sets the apropriate global or local data in each setting.

* clang format

* clang format take 2

can the docker container save this?

* address comments and style issues

* config: read and write settings with global awareness

Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.

* settings: restore global state when necessary

Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.

* configuration: guard setting values incorrectly

This disables setting values while a game is running if the setting is
overwritten by a per game setting.

* config: don't write local settings in the global config

Simple guards to prevent writing the wrong settings in the wrong files.

* configuration: add comments, assume less, and clang format

No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.

* configuration: fix a logic error

Should not be negated

* restore settings' global state regardless of accept/cancel

Fixes loading a properties dialog and causing the global config dialog to show
local settings.

* fix more logic errors

Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).

* fix another logic error

In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.

* configure_audio: set toggle_stretched_audio to tristate

* fixed custom rtc and rng seed overwriting the global value

* clang format

* rebased

* clang format take 4

* address my own review

Basically revert unintended changes

* settings: literal instead of casting

"No need to cast, use 1U instead"
Thanks, Morph!

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>

* Revert "settings: literal instead of casting
"

This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.

* main: fix status buttons reporting wrong settings after stop emulation

* settings: Log UseDockedMode in the Controls group

This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.

* main: load settings if the file has a title id

In other words, don't exit if the loader has trouble getting a title id.

* use a zero

* settings: initalize resolution factor with constructor instead of casting

* Revert "settings: initalize resolution factor with constructor instead of casting"

This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.

* configure_graphics: guard device selector when Vulkan is global

Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.

* address reviewer concerns

Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.

Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>

* main: load per-game settings after LoadROM

This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.

* Revert "main: load per-game settings after LoadROM"

This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.

* main: only restore global settings when necessary

Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.

* configuration_shared: address reviewer concerns except operator overrides

Dropping operator override usage in next commit.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

* settings: Drop operator overrides from Setting template

Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.

* complete rebase

* configuration_shared: translate "Use global configuration"

Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.

* configure_per_game: address reviewer concern

As far as I understand, it prevents the program from unnecessarily copying strings.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
2020-07-09 22:42:09 -04:00
ReinUsesLisp
47a7c4f4fe yuzu: Add frontend settings for assembly shaders
Add settings for assembly shaders. Currently hidden to avoid users from
accidentally enabled them.
2020-05-19 17:53:17 -03:00
Fernando Sahmkow
084ceb925a UI: Replasce accurate GPU option for GPU Accuracy Level 2020-04-22 11:36:04 -04:00
Lioncash
1c340c6efa CMakeLists: Specify -Wextra on linux builds
Allows reporting more cases where logic errors may exist, such as
implicit fallthrough cases, etc.

We currently ignore unused parameters, since we currently have many
cases where this is intentional (virtual interfaces).

While we're at it, we can also tidy up any existing code that causes
warnings. This also uncovered a few bugs as well.
2020-04-15 21:33:46 -04:00
bunnei
571451bdfe core: settings: Add setting to enable vsync, which is on by default. 2020-02-25 20:57:02 -05:00
ReinUsesLisp
788d57d723 settings: Add settings for graphics backend 2020-01-29 17:53:11 -03:00
ReinUsesLisp
be9f80ef56
telemetry_session: Report renderer backend
We only have OpenGL as an option for now. Hardcode the entry.
2019-12-02 16:50:39 -03:00
ReinUsesLisp
526e533e90
telemetry_session: Use temporary to avoid writing the same enum 2019-12-02 16:49:46 -03:00
Lioncash
8fc806e88a yuzu: Remove setting for using Unicorn
The JIT is mature enough that this setting can be removed, falling back
to Unicorn only on unsupported architectures. Any missing features from
Unicorn (of which there are extremely few), are mostly
developer-oriented, which most users don't care about.

Features should be coordinated with the JIT, not the interpreter,
anyhow.
2019-07-11 05:59:13 -04:00
fearlessTobi
447bdac298 yuzu: Remove CPU Jit setting from the UI
A normal user shouldn't change this, as it will slow down the emulation and can lead to bugs or crashes. The renaming is done in order to prevent users from leaving this on without a way to turn it off from the UI.
2019-07-04 14:48:08 +02:00
Lioncash
b1a4ab2ccc core/telemetry_session: Remove unnecessary web service nulling out in destructor
This will automatically occur when the backend instance goes out of
scope at the end of the destructor's execution.
2019-05-28 22:28:18 -04:00
Lioncash
215fd82738 core/telemetry_session: Remove usages of the global system accessor
Makes the dependency explicit in the TelemetrySession's interface
instead of making it a hidden dependency.

This also revealed a hidden issue with the way the telemetry session was
being initialized. It was attempting to retrieve the app loader and log
out title-specific information. However, this isn't always guaranteed to
be possible.

During the initialization phase, everything is being constructed. It
doesn't mean an actual title has been selected. This is what the Load()
function is for. This potentially results in dead code paths involving
the app loader. Instead, we explicitly add this information when we know
the app loader instance is available.
2019-05-28 22:28:15 -04:00
zhupengfei
10c4f23953 core/telemetry_session: Only create the backend when we really need it
The backend is not used until we decide to submit the testcase/telemetry, and creating it early prevents users from updating the credentials properly while the games are running.
2019-05-04 19:45:48 +02:00
bunnei
d6015ee211 settings: Add new graphics setting for use_asynchronous_gpu_emulation. 2019-03-06 21:09:09 -05:00
ReinUsesLisp
e78da8dc1f settings: Hide shader cache behind a setting 2019-02-06 22:20:57 -03:00
fearlessTobi
ca4e20b4e0 web_service: move telemetry condition from TelemetrySession constructor to destructor
Fixes an issue where Testcases couldn't be sent when Telemetry was disabled, because both things are tied closely together in the backend.
2018-12-08 14:34:37 +01:00
fearlessTobi
585b6a6a50 compatdb: Use a seperate endpoint for testcase submission 2018-10-28 13:23:02 +01:00
bunnei
ee7c2dbf5a config: Rename use_accurate_framebuffers -> use_accurate_gpu_emulation.
- This will be used as a catch-all for slow-but-accurate GPU emulation paths.
2018-10-16 17:02:29 -04:00
Lioncash
8aa4889e76 telemetry_session: Add missing includes
Prevents potential compilation issues in the future by including missing
headers for certain functions and types.
2018-10-09 14:51:39 -04:00
Lioncash
8723cc8798 telemetry_session: Use a std::array in GenerateTelemetryId()
We don't need to potentially heap-allocate a std::string instance here,
given the data is known ahead of time. We can just place it within an
array and pass this to the mbedtls functions.
2018-10-09 14:46:26 -04:00
fearlessTobi
120d8f3bf7 Address more review comments 2018-10-02 15:30:48 +02:00