Commit graph

511 commits

Author SHA1 Message Date
Lioncash
e11e1dcf2d yuzu: Remove unused variables in Qt code
Removes two unused variables in out Qt code. In this case the removal of
these two results in less allocations, given std::map allocates on the
heap.
2021-01-14 03:05:41 -05:00
Morph
f1e278c30f
Merge pull request #5343 from lioncash/qt6
configure_motion_touch: Migrate off QRegExp to QRegularExpression
2021-01-14 15:30:26 +08:00
Lioncash
45aee996c1 configure_motion_touch: Prevent use after move in ApplyConfiguration()
touch_engine was being compared against after being moved into the
setter for the engine, so this comparison wouldn't behave properly.
2021-01-13 22:37:40 -05:00
Lioncash
a2952ac213 configure_motion_touch: Migrate off QRegExp to QRegularExpression
QRegularExpression was introduced in Qt 5 as a better replacement for
QRegExp. In Qt 6.0 QRegExp is removed entirely.

To remain forward compatible with Qt 6.0, we can transition over to
using QRegularExpression.
2021-01-13 22:25:52 -05:00
LC
5e35c69f35
Merge pull request #5330 from german77/regexerror
Fix IP validator error
2021-01-13 22:08:42 -05:00
german
06cf705501 Fix IP validator error where the last octet produced an error if the value was higher than 199 2021-01-13 11:02:28 -06:00
Morph
05f58144c9 config: Enable docked mode by default 2021-01-10 09:37:38 -05:00
Morph
4aae21e1e4 general: Resolve C4062 warnings on MSVC 2021-01-09 14:46:35 -05:00
MerryMage
57c9da1b39 dynarmic: Add Unsafe_InaccurateNaN optimization 2021-01-02 20:13:21 +00:00
bunnei
1ff341f3dc
Merge pull request #5209 from Morph1984/refactor-controller-connect
configure_input: Modify controller connection delay
2021-01-01 13:10:34 -08:00
Morph
904ac1daec configure_input: Modify controller connection delay
Increases the controller connection delay to 60ms and refactors it to attempt to disconnect all controllers prior to connecting all controllers in HID.
2021-01-01 06:39:24 -05:00
bunnei
916438a9de core: settings: Untangle multicore from asynchronous GPU.
- Now that GPU is always threaded, we can support multicore with synchronous GPU.
2020-12-28 16:33:48 -08:00
german
80fece4e08 Allow to invert analog axis with right click 2020-12-26 17:46:14 -06:00
ReinUsesLisp
1b9e08ab78 cmake: Always enable Vulkan
Removes the unnecesary burden of maintaining separate #ifdef paths and
allows us sharing generic Vulkan code across APIs.
2020-12-24 21:07:24 -03:00
FearlessTobi
10b0ab7926 yuzu: Remove gdbstub configuration
The gdbstub itself was removed with https://github.com/yuzu-emu/yuzu/pull/5028.
This PR just removes the remaining gdb configuration code from the emulator and the UI.
2020-12-19 19:19:42 +01:00
bunnei
00c6254129
Merge pull request #5156 from comex/xx-raws
configure_motion_touch: Fix unescaped backslash in regex
2020-12-08 09:39:47 -08:00
Morph
607bb8d14b
Merge pull request #5020 from german77/AnalogfromButtonFix
Disable analog joystick from buttons by default
2020-12-08 10:30:21 +08:00
german
b57ba7bfb6 Disable analog joystick from buttons by default 2020-12-07 19:34:52 -06:00
comex
2dce2be138 configure_motion_touch: Fix unescaped backslash in regex
Since this is inside a string literal, backslashes that are part of
regex syntax have to be escaped.  But that's ugly, so convert to a raw
string instead.
2020-12-06 19:25:48 -05:00
bunnei
25f650e075
Merge pull request #4937 from german77/multiUDP
InputCommon: Add multiple udp server support
2020-12-01 11:47:37 -08:00
bunnei
7bc3e80399
Merge pull request #4939 from german77/MouseInput
InputCommon: Implement full mouse support
2020-11-29 22:59:50 -08:00
Lioncash
5bc4eabe36 core: Eliminate remaining usages of the global system instance
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
2020-11-27 11:40:45 -05:00
german
e46f0e084c Implement full mouse support 2020-11-25 23:59:30 -06:00
german
2c2b586d86 Add multiple udp server support 2020-11-25 23:44:41 -06:00
bunnei
dcfa1992ea
Merge pull request #4959 from Morph1984/emulated-controller-styleset
configure_input_player: Use the NpadStyleSet to limit the available controllers shown
2020-11-25 11:20:46 -08:00
bunnei
5d1447897a
Merge pull request #4451 from slashiee/extended-logging
logging/settings: Increase maximum log size to 100 MB and add extended logging option
2020-11-23 13:34:15 -08:00
bunnei
3a85bc1e77
Merge pull request #4944 from lioncash/system-rem
patch_manager: Remove usages of the global system instance
2020-11-21 22:12:34 -08:00
Morph
102630f2b2 configure_input_player: Use the npad style set to show the available controllers
This will reduce the likelihood of an invalid controller type to be set within a game
2020-11-20 22:22:22 -05:00
Lioncash
6f8a06bac5 patch_manager: Remove usages of the global system instance
With this, only 19 usages of the global system instance remain within
the core library.

We're almost there.
2020-11-18 09:36:48 -05:00
Lioncash
be4fc777c0 configure_input_player: Use static qualifier for IsProfileNameValid()
This is a static member function, so we don't need use an existing
instance to call this function.
2020-11-17 23:12:44 -05:00
Morph
b254d528bc configure_input: Accommodate for the mouse input device engine 2020-11-15 23:33:21 -05:00
Morph
6f5b942897 configure_input: Update the input profiles for other player tabs 2020-11-15 23:33:21 -05:00
Morph
97b2220a82 general: Fix compiler warnings on linux and miscellaneous changes 2020-11-15 23:33:21 -05:00
Morph
117bdc71e0 sdl_impl: Revert to the "old" method of mapping sticks
Not all controllers have a SDL_GameController binding. This caused controllers not present in the SDL GameController database to have buttons mapped instead of axes.

Furthermore, it was not possible to invert the axes when it could be useful such as emulating a horizontal single joycon or other potential cases. This allows us to invert the axes by reversing the order of mapping (vertical, then horizontal).
2020-11-15 23:33:21 -05:00
Morph
760a9e8693 applets/controller: Change the input button to create input profiles
Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:21 -05:00
Morph
91c06dae1a input: Disconnect a controller prior to connecting a new one
Some games do not respond to a change in controller type if 1) The controller is not disconnected prior to being reconnected and/or 2) The controller is reconnected instantly after being disconnected.

Since it is not possible to change controllers instantly on hardware and requiring a disconnect prior to connecting a new one, we should emulate this as well with a small delay, fixing the aforementioned issue.
2020-11-15 23:33:21 -05:00
Morph
e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph
38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph
d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph
652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph
ceb7b11f16 configure_input_player: Change "Defaults" button behavior
RestoreDefaults() now restores the selected devices' mappings using UpdateMappingWithDefaults().
This allows us to move the keyboard mapping from RestoreDefaults() to UpdateMappingWithDefaults().
2020-11-15 23:33:20 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph
64e174237e config: Migrate config files into config/custom
Co-authored-by: lat9nq <lat9nq@virginia.edu>
2020-11-15 23:33:19 -05:00
Morph
c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
Morph
57d89e291d input_profiles: Implement input profiles 2020-11-15 23:33:19 -05:00
Morph
75eaab2e0f configure_input_player: Implement input exclusivity and persistence
With this, the "Input Devices" combobox should accurately reflect the input device being used and disallows inputs from other input devices unless the input device is set to "Any".
2020-11-15 23:33:19 -05:00
Morph
9d4edd4e88 ui/themes: Cleanup UI 2020-11-15 23:33:19 -05:00
Lioncash
7aae6d6d2b core/settings: Move configuring_global behind an API
Rather than have directly modified global state here, we can make it an
implementation detail and have an interface that changes are queried
through.
2020-11-04 04:16:37 -05:00
bunnei
941563f981 yuzu: settings: Enable multicore, asynch GPU, and assembly shaders by default.
- In general, this is now the preferred settings for most games.

# Conflicts:
#	src/yuzu/configuration/config.cpp
2020-10-26 23:13:05 -07:00
ameerj
eb67a45ca8 video_core: NVDEC Implementation
This commit aims to implement the NVDEC (Nvidia Decoder) functionality, with video frame decoding being handled by the FFmpeg library.

The process begins with Ioctl commands being sent to the NVDEC and VIC (Video Image Composer) emulated devices. These allocate the necessary GPU buffers for the frame data, along with providing information on the incoming video data. A Submit command then signals the GPU to process and decode the frame data.

To decode the frame, the respective codec's header must be manually composed from the information provided by NVDEC, then sent with the raw frame data to the ffmpeg library.

Currently, H264 and VP9 are supported, with VP9 having some minor artifacting issues related mainly to the reference frame composition in its uncompressed header.

Async GPU is not properly implemented at the moment.

Co-Authored-By: David <25727384+ogniK5377@users.noreply.github.com>
2020-10-26 23:07:36 -04:00