Commit graph

130 commits

Author SHA1 Message Date
Morph
97b2220a82 general: Fix compiler warnings on linux and miscellaneous changes 2020-11-15 23:33:21 -05:00
Morph
30e0d1c973 controllers/npad: Remove the old vibration filter
Previously we used a vibration filter that filters out amplitudes close to each other. It turns out there are cases where this results into vibrations that are too inaccurate. Remove this and move the 100Hz vibration filter (Only allowing a maximum of 100 vibrations per second) from sdl_impl to npad when enable_accurate_vibrations is set to false.
2020-11-15 23:33:21 -05:00
Morph
978ca65f59 hid: Implement InitializeVibrationDevice and IsVibrationDeviceMounted 2020-11-15 23:33:20 -05:00
Morph
e9e1876e82 input_common: Add VibrationDevice and VibrationDeviceFactory
A vibration device is an input device that returns an unsigned byte as status.
It represents whether the vibration device supports vibration or not.
If the status returns 1, it supports vibration. Otherwise, it does not support vibration.
2020-11-15 23:33:20 -05:00
Morph
38110dd485 configure_input: Add per-player vibration
Allows for enabling and modifying vibration and vibration strength per player.
Also adds a toggle for enabling/disabling accurate vibrations.

Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-11-15 23:33:20 -05:00
Morph
d6a41cfc21 settings: Remove global vibration strength modifier
This will be replaced in favor of per-player vibration strength modifiers.
2020-11-15 23:33:20 -05:00
Morph
92fa5257c7 hid: Mark Begin/EndPermitVibrationSession as stubs
The implementation of these commands seem incomplete and causes rumble in Super Mario Party to stop working since only EndPermitVibrationSession is called. Thus, these are better off being marked as a stub until this can be investigated more thoroughly.
2020-11-15 23:33:20 -05:00
Morph
373408ae8c controllers/npad: Send an empty vibration on destruction/deactivation
This stops all controllers from continuously vibrating when emulation is stopped.
2020-11-15 23:33:20 -05:00
Morph
9b501af8e3 controllers/npad: Add heuristics to reduce rumble state changes
Sending too many state changes in a short period of time can cause massive performance issues.
As a result, we have to use several heuristics to reduce the number of state changes to minimize/eliminate this performance impact while maintaining the quality of these vibrations as much as possible.
2020-11-15 23:33:20 -05:00
Morph
652d6766d5 configure_input: Hook up the vibration percentage spinbox
This allows setting the vibration strength percentage anywhere from 1% to 100%.
Also hooks up the remaining motion button and checkbox in the Controller Applet.
2020-11-15 23:33:20 -05:00
Morph
e02ef3c3be controllers/npad: Stop games from vibrating incorrect controllers
Fixes vibration in 1-2 Switch and potentially other games where they would vibrate both players' joycons at the same time.
2020-11-15 23:33:20 -05:00
Morph
07b81f57ba hid: Fix controller rumble based on new research
This fixes the issue where rumble is only sent to the first controller.
Now, individual controllers can receive their own rumble commands.
2020-11-15 23:33:20 -05:00
Morph
e3c2749986 hid: Reorder all HID commands
Reorders all HID commands in command id order.
2020-11-15 23:33:20 -05:00
Morph
428ce8ec29 controllers/npad: Rename NPadType to NpadStyleSet
This more accurately represents the underlying type and avoids confusion with NpadType
2020-11-15 23:33:20 -05:00
Morph
0a966e2cac controllers/npad: Add DeviceHandle struct
A DeviceHandle describes a vibration device or six-axis sensor based on the npad type, npad id, and device index/position
2020-11-15 23:33:20 -05:00
Morph
8f2959f680 settings: Preparation for per-game input settings 2020-11-15 23:33:20 -05:00
Morph
c0c4ed0d3b controllers/npad: Connect a controller on init if none are connected 2020-11-15 23:33:19 -05:00
bunnei
3d592972dc
Revert "core: Fix clang build" 2020-10-20 19:07:39 -07:00
Lioncash
be1954e04c core: Fix clang build
Recent changes to the build system that made more warnings be flagged as
errors caused building via clang to break.

Fixes #4795
2020-10-17 19:50:39 -04:00
Lioncash
39c8d18feb core/CMakeLists: Make some warnings errors
Makes our error coverage a little more consistent across the board by
applying it to Linux side of things as well. This also makes it more
consistent with the warning settings in other libraries in the project.

This also updates httplib to 0.7.9, as there are several warning
cleanups made that allow us to enable several warnings as errors.
2020-10-13 13:16:49 -04:00
bunnei
92adb69fa7
Merge pull request #4736 from Morph1984/home-button-input-protection-stub
hid: Stub HomeButtonInputProtection service commands
2020-10-07 14:54:05 -07:00
german
2f47b27654 Only use inputs corresponding to controller type 2020-10-01 19:39:53 -05:00
David
4d0ae1a17a
Merge pull request #4291 from german77/ImplementControllerRumble
input_common: First implementation of controller rumble
2020-09-30 21:24:11 +10:00
Morph
6380731486 hid: Stub HomeButtonInputProtection service commands
- Used in 1-2 Switch. Given that we do not emulate the functionality of the home button yet, we can stub this for now.
2020-09-30 06:38:24 -04:00
german
ab88c2f611 First implementation of controller rumble 2020-09-29 10:38:25 -04:00
german
ddff03cff5 Use different timing for motion 2020-09-23 19:09:33 -05:00
bunnei
754109fd54
Merge pull request #4683 from Morph1984/NpadHandheldActivationMode-impl
hid: Implement Get/SetNpadHandheldActivationMode
2020-09-20 12:39:20 -07:00
Morph
ab961e0701 hid: Implement Get/SetNpadHandheldActivationMode
- Used in Clubhouse Games: 51 Worldwide Classics
2020-09-18 10:10:30 -04:00
bunnei
3f6d83b27c
Merge pull request #4594 from german77/MotionHID
hid/configuration: Implement motion controls to HID
2020-09-17 12:39:01 -07:00
bunnei
03179ecafe
Merge pull request #4597 from Morph1984/mjolnir-p2
Project Mjölnir: Part 2 - Controller Applet
2020-09-10 19:28:23 -04:00
Morph
5b6268d26a configure_input: Hook up the motion button and checkbox
This allows toggling motion on or off, and allows access to the motion configuration.
Also changes the [waiting] text for motion buttons to Shake! as this is how motion is connected to a player.
2020-09-05 09:46:34 -04:00
german
6ee8eab670 Add cemu hook changes related to PR #4609 2020-09-04 21:48:13 -05:00
german
0774b17846 Remove RealMotionDevice 2020-09-04 21:48:13 -05:00
Morph
df3cbd4758 controllers/npad: Simplify motion entry assignment
Simplifies the motion assignment in the Dual Joycon entry and assigns index 1 of the motion entry (Motion 2) for the right joycon.
2020-09-04 21:48:13 -05:00
german
ff679f3d17 Include HID and configuration changes related to motion 2020-09-04 21:48:03 -05:00
Morph
0e33b19ae0 hid: Implement MergeSingleJoyasDualJoy
- Used in multiple games such as Super Mario Odyssey.
2020-09-04 15:38:33 -04:00
Morph
7299356f37 applets/controller: Implement fallback applet for the SDL frontend
Implement the fallback applet for the SDL frontend, connecting only the minimum amount of players required.
2020-09-04 12:23:25 -04:00
Morph
5219615418 Project Mjölnir: Part 2 - Controller Applet
Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-09-04 12:23:25 -04:00
FearlessTobi
e6bd1fd1b8 yuzu: Add motion and touch configuration 2020-08-29 18:56:34 +02:00
Morph
eb149ec696 controllers/npad: Fix inconsistencies with controller connection statuses 2020-08-26 02:32:32 -04:00
Morph
334ef2efdd controllers/npad: Fix LibNX controller connection statuses
This allows homebrew applications to be able to properly detect connected controllers.
2020-08-26 02:32:32 -04:00
Morph
e7c174b426 controllers/npad: Fix LedPattern for P1-4 2020-08-26 02:32:32 -04:00
Morph
f0fac0c7fb Project Mjölnir: Part 1
Co-authored-by: James Rowe <jroweboy@gmail.com>
Co-authored-by: Its-Rei <kupfel@gmail.com>
2020-08-26 02:32:32 -04:00
Lioncash
2296e921d2 core: Resolve several -Wextra-semi warnings
We can amend one of the cascade macros to require semicolons in order to
compile. In other cases, we can just remove the superfluous semicolons.
2020-08-14 09:09:20 -04:00
David Marcec
0319cc1c37 hid: Only update keyboard & debug pad inputs if enabled
Previously we would ignore this setting and would update the states regardless of the user setting
2020-07-16 22:28:49 +10:00
Fernando Sahmkow
e31425df38 General: Recover Prometheus project from harddrive failure
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host 
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and 
Suspended State, Recreates the bootmanager, Initializes Multicore 
system.
2020-06-27 11:35:06 -04:00
Morph
0235915baa hid: Implement Get/ResetGyroscopeZeroDriftMode
- Used by Captain Toad Treasure Tracker
2020-06-21 16:25:41 -04:00
David Marcec
a79f060ea2 hid: Clear keyboard states & fix logic issue
Previously we never cleared the states of the entries and the key would stay held down, also looping over the key bytes for each key lead to setting every bit for the key state instead of the key we wanted
2020-05-12 12:40:50 +10:00
FearlessTobi
4e99a06c70 npad: Lower log level for VibrateController to Debug 2020-04-20 18:44:57 +02:00
bunnei
a8d5d08e2e service: hid: npad: Fix implicit fallthrough errors. 2020-04-18 14:41:08 -04:00