Summary:
Piping data around on Windows doesn't work well when it contains zany characters like "null" and "newline". Fixes T3266.
Instead of piping data into `git apply`, write to a temporary file.
Test Plan:
Ran `arc patch`, got good results.
>>> [17] <exec> $ git apply --index --reject -- '/private/var/folders/8k/c3vkmjy5335gcxdzxkhwq82w0000gn/T/7z9iea6srikoo0sc/4266-ZEyvz9'
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T3266
Differential Revision: https://secure.phabricator.com/D6070
Summary: @alex has git 1.7.0.4 which doesn't have this flag. We don't actually need it: we always provide a commit message when calling this method. Remove the flag for compatibility, leaving a note in case we bump into this in the future.
Test Plan: N/A
Reviewers: btrahan, vrana, alex
Reviewed By: alex
CC: aran
Differential Revision: https://secure.phabricator.com/D5926
Summary:
Arc Revert does the following:
1. Git revert
2. Go to the differential of the rev you are reverting and either repoen it or set it to a reverted state
3. File a hipri task to orig author
[Preview] Creating Arc Revert workflow
Porting arc revert from FB4A to phabricator for general usage. This is my first stab,
so totally appreciate feedback and assistance. I'm currently focused
on making this work for git. However, I built out the functions through the GitAPI so this
could be easily extendable to Mercurial later on.
Stuck on the following (help):
1. Creating a task for FB internal. I tried building on top of existing arc listeners
but getting errors on failures to load the TaskCreator (and other) tasks.
2. I'm using a hacky way to grab the diff revision id from the newly created
revert diff. (see line 204) I'm looking for a way to just fetch the diff ID
from arc after the diff is created; is this possible?
Test Plan:
-
1. Ran arc revert on a www and fbcode diff
2. Confirmed that revert was run on the diffs and a proper diff filed
-
Reviewers: royw, sdwilsh, nh, epriestley
Reviewed By: epriestley
CC: aran, epriestley, Korvin, pti, keir
Maniphest Tasks: T1751
Differential Revision: https://secure.phabricator.com/D5553
Summary:
arc lint was hardcoded for git for amending commits with lint
patches. This enables the same functionality for mercurial.
Test Plan:
Made some changes that would result in a lint patch.
arc diff
Verify that the patches it produces were amended into the commit.
Verified it still works in git as well.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5716
Summary:
- Added arc.autostash option to have this behaviour off by
default (but configurable on a per-project basis).
- Automatic stashing of changes now informs the user of how
to restore their working directory if Arcanist unexpectedly
terminates.
- Fixed an issue with finalizeWorkingCopy when the workflow
didn't require a clean working copy.
Test Plan:
Test `arc diff` when there are changes in the working
directory; by default it should tell you to stash or commit.
Turn on the arc.autostash option and try again; it should
automatically stash with a message on how to recover, and
it should restore the working directory automatically under
almost any circumstances (other than an unrecoverable error).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5385
Summary: Git spits these out with \n at the end.
Test Plan:
```
>>> orbital ~/devtools/arcanist $ git branch --set-upstream trim master
Branch trim set up to track local branch master.
>>> orbital ~/devtools/arcanist $ arc which --base arc:upstream
RELATIVE COMMIT
If you run 'arc diff', changes between the commit:
acf7600e6e Temporarily restore apache/license linters
...and the current working copy state will be sent to Differential, because
it is the merge-base of the upstream of the current branch and HEAD, and
matched the rule 'arc:upstream' in your args 'base' configuration.
You can see the exact changes that will be sent by running this command:
$ git diff acf7600e6e728395..HEAD
These commits will be included in the diff:
3580555e4b30598f WIP
MATCHING REVISIONS
These Differential revisions match the changes in this working copy:
(No revisions match.)
Since there are no revisions in Differential which match this working copy, a
new revision will be created if you run 'arc diff'.
```
Reviewers: brennantaylor
Reviewed By: brennantaylor
CC: aran
Differential Revision: https://secure.phabricator.com/D4913
Summary:
Record author email information in `arc diff`, so we can recreate it in `arc patch` and elsewhere without creating any kind of email exposure issues.
In Mercurial, we currently store the whole string ("username <email@domain.com>"). Make this consistent with Git.
Test Plan: Created git and hg diffs, saw authorEmail populated.
Reviewers: btrahan, edward, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4825
Test Plan: Deleted file in Git, ran `arc diff`, confirmed the question, saw the file as deleted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4603
Summary:
A git submodule looks a lot like a normal git repo, but the .git
directory is replaced with a file that git reads to find the real
location of the git directory. When arcanist tries to write a file into
a directory inside of there, it was failing silently, and then crashing
silently when it couldn't read results back out. Instead of assuming the
git directory is a directory named .git at the toplevel of the tree, we
use the appropriate git command to get the correct git directory.
Test Plan: submit a diff from a submodule
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4482
Summary:
See D4049, D4096.
- Move commit range storage from Mercurial and Git APIs to the base API.
- Move caching up to the base level.
- Store symbolic name and resolved name separately, so we can re-resolve the correct commit from the symbolic name after dirtying caches.
- Rename `supportsRelativeLocalCommit()` to `supportsCommitRanges()` (old name wasn't very good, and not consistent with new terminology like the `--base` flag).
- Rename `getRelativeCommit()` and `setRelativeCommit()` to `getBaseCommit()` and `setBaseCommit()`.
- Introduce `reloadCommitRange()` and call it from `reloadWorkingCopy()`.
I think this fixes the problem in D4049, and provides a general solution for the class of problems we're running into here, with D4096. Specifically:
- We no longer get dirty caches, as long as you call reloadWorkingCopy() after changing the working copy (or call a method which calls it for you).
- We no longer get order-of-parsing-things problems, because setBaseCommit() reloads the appropriate caches.
- We no longer get nasty effects from calling `requireCleanWorkingCopy()` too early.
Test Plan: This is pretty far-reaching and hard to test. Unit tests; ran various arc commands. :/
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4097
Summary:
This method is used in three cases:
# For unit tests, to set the range to 'HEAD^' or '.^' in an agnostic way.
# For "amend", to set the range to the commit to be amended (also 'HEAD^' or '.^').
# For "patch" and "upgrade" so we don't fail just because there's an invalid "base" rule somewhere in the config when doing clean-working-copy tests.
For cases (1) and (2), introduce an "arc:this" rule to mean "the current commit". For case (3), remove the call; it is no longer necessary to check the commit range in order to do tests for the working copy state after D4095.
Test Plan: Ran unit tests, "arc upgrade", "arc patch", "arc amend".
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4096
Summary:
See discussion in D4049.
The getWorkingCopyStatus() method gets called from requireCleanWorkingCopy() in a lot of places, which triggers resolution of the base of the commit range. This is unnecessary; we do not need to examine the base commit in order to determine whether the working copy is dirty or not. This causes problems, in D4049 and elsewhere (we currently have a lot of fluff calls to setDefaultBaseCommit() in workflows which need to call requireCleanWorkingCopy() but do not ever use commit ranges, such as `arc patch`). This is mostly an artifact of SVN, where the "commit range" and "uncommitted stuff in the working copy" are always the same.
- Split the method into two status methods: getUncommittedStatus() (uncommitted stuff in the working copy, required by requireCleanWorkingCopy()) and getCommitRangeStatus() (committed stuff in the commit range).
- Lift caching out of the implementations into the base class.
- Dirty the cache after we commit.
This doesn't do anything useful on its own and creates one caching problem (`commitRangeStatusCache` is not invalidated when the commit range changes because of `setBaseCommit()` or similar) but I wanted to break things apart here. I won't land it until there's a more complete picture.
This creates a minor performance regression in git and hg (we run less stuff in parallel than previously) but all the commands should be disk-bound anyway and the regression should be minor. It prevents a larger regression in `hg` in D4049, and lets us do less work to arrive at common error states (dirty working copy). We can examine perf at the end of this change sequence.
Test Plan: Ran unit tests, various `arc` commands.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4095
Summary: I plan to use it in `save_lint.php`.
Test Plan:
$api->getUnderlyingWorkingCopyRevision(); // In Git SVN repo
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4054
Summary: Also delete extra newlines.
Test Plan:
$ arc diff # on top of my commit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2025
Differential Revision: https://secure.phabricator.com/D3996
Summary:
There's quite some logic in here:
- It automatically decides whether to create a new commit or amend.
- It partially respects 'default-relative-commit'.
- However if it points to a closed revision then it creates a new commit.
Resolves T2025.
Test Plan:
`arc diff` on:
- Clean committed repository.
- Dirty repository without commit since 'default-relative-commit'.
- Dirty repository with non-revision commit since 'default-relative-commit'.
- Dirty repository with revision commit since 'default-relative-commit'.
- `arc diff HEAD^` on dirty repository on top of closed revision.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2025
Differential Revision: https://secure.phabricator.com/D3967
Summary:
accommodate git's diff.suppress-blank-empty=true setting
Without this change, if you were to set diff.suppress-blank-empty=true
in your .gitconfig (as I do), then "arc diff" would always fail with the
cryptic diagnostic, "Diff Parse Exception: Found the wrong number of
hunk lines."
Test Plan:
Put this in ~/.gitconfig or .git/config
[diff]
suppress-blank-empty = true
and run "arc lint". It should pass. Without this chnage,
it would fail as described above.
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3963
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in unit tests and LICENSE file.
Reviewers: epriestley, btrahan, edward
Reviewed By: epriestley
CC: aran, Korvin, davidrecordon
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3881
Summary:
This is horrible and git specific, but fixes a case where people are using "arc
patch --nobranch ..." when they're not currently on a branch.
The old code assumed you were on a branch and used getBranchName() to record
this, in order to return to that branch later and cherry-pick the patch.
When not on a branch, and using arc patch --nobranch, this was trying to return
to the branch '(no branch)'.
Now, I detect that we're not on a branch and just record what HEAD is instead.
Test Plan:
Checkout the SHA of master (so I'm on master, but not on a branch) then try to
patch it with a feature diff:
€ git checkout e7a3ec68159d6847372cab5ad913f2f15aa7c249
Warning: you are leaving 1 commit behind, not connected to
any of your branches:
ac1ad39 Updating a-file
If you want to keep them by creating a new branch, this may be a good time
to do so with:
git branch new_branch_name ac1ad392350a51edd10343f12b9713f5e5b3707c
HEAD is now at e7a3ec6... Fix arcconfig
€ arc patch --nobranch D7
Created and checked out branch arcpatch-D7.
OKAY Successfully committed patch.
€ git branch
* (no branch)
feature
haddock
master
€ git log --oneline | head -2
38c0235 Updating a-file
e7a3ec6 Fix arcconfig
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3743
Summary: `arc patch` currently warns about "This diff is against commit svn+ssh://... but the commit is nowhere in the working copy" in Git SVN repository.
Test Plan:
$ arc patch # in Git SVN repository
$ svn find-rev r121212112 # invalid revision
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3539
Git commit messages must have 2 newlines between the subject and body
If used to rewrite a commit message then the commit message will be
incorrectly reformatted.
Summary:
This reduces time of `arc branch` from 13s to 7s in my repo which is faster than `git branch --verbose` (10s).
The price for this speedup is that we loose the information [ahead 1, behind 21242] but we showed it only in branches with no revision so it's not a big deal.
Test Plan:
$ arc branch
Reviewers: epriestley
Reviewed By: epriestley
CC: ahupp, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3005
Summary:
- Implement "arc:amended", a base commit DSL rule which always selects HEAD (git) or `.` (hg) if it has "differential revision:" in the commit message. This is unambiguously correct in amend workflows, and can cover holes in other rules like "git:branch-unique(*)".
- Fix a bunch of Mercurial stuff:
- Our use of '.' is wrong, and based on a misunderstanding on my part of the behavior of `hg diff --rev . --rev .`, which means "ignore the second --rev flag", not ". means working directory state". As far as I know there's no explicit way to say "the working copy plus all its changes".
- The `--prune` argument to "hg log" does not support symbolic names like ".^". Use revsets instead.
- Reduce the number of times we need to run `hg branch`.
- We can safely use "." to mean "the working copy revision", and do not need to do "hg --debug id" or similar.
- Generally simplify some of the nonsense in the implementation left over from me having no idea how Mercurial works.
Test Plan:
Ran "arc which" in various scenarios in a mercurial working copy. I //think// I exercised all the changes.
Ran "arc which --base arc:amended" in hg and git working copies without "Differential Revision:" in head/. (no match) and with it (matched head/.).
Reviewers: dschleimer
Reviewed By: dschleimer
CC: Makinde, tido, phleet, aran
Maniphest Tasks: T1233
Differential Revision: https://secure.phabricator.com/D2876
Summary:
Add a DSL command to select the first commit between HEAD and (the merge-base of some target with HEAD) that's on more than one branch.
This is similar to @csilvers' suggestion in <https://secure.phabricator.com/T1233#comment-8>. A specific problem this address is that, currently, if you use this workflow:
$ git checkout -b feature
$ git commit
$ git checkout -b subfeature
$ git commit
..i.e., develop dependent features in sub-branches, "arc diff" will try to send up (feature + subfeature). If you use the rule 'git:branch-unique(origin/master)' instead, diffing from 'subfeature' will correctly select only the commit(s) on 'subfeature'.
Test Plan: Constructed feature/subfeature branches, verified that we select the correct base commit.
Reviewers: dschleimer, csilvers, btrahan, jungejason
Reviewed By: dschleimer
CC: aran
Maniphest Tasks: T1233
Differential Revision: https://secure.phabricator.com/D2866
Summary:
- Move "arc branch"-specific code to the branch workflow.
- Instead of doing "git rev-parse", just do "git branch --verbose --abbrev=40".
- Use revision owners to identify ownership, not working copy identity. Particularly with the advent of "Commandeer", you might not own commits you made.
- Do a batch lookup for commits by hash (depends on D2859, but doesn't break without it).
- Use PhutilConsole for console stuff.
- Removed color from "arc list" for the moment.
- The "--by-status" flag has a slightly different output format now.
Test Plan: Ran "arc branch" in various circumstances, verified it identifies branches in immutable history repositories.
Reviewers: btrahan, vrana, jungejason, nh, slawekbiel
Reviewed By: slawekbiel
CC: aran
Maniphest Tasks: T693
Differential Revision: https://secure.phabricator.com/D2860
Summary:
New optional mode. If you set 'base' in local, project or global config or pass '--base' to 'arc diff' or 'arc which', it switches to DSL mode.
In DSL mode, lists of rules from args, local, project and global config are resolved, in that order. Rules can manipulate the rule machine or resolve into actual commits. Provides support for some 'arc' rules (mostly machine manipulation) and 'git' rules (symbolic ref and merge-base).
Test Plan:
Ran unit tests. Also:
```$ arc which --show-base --base 'arc:prompt'
Against which commit? HEAD
HEAD
$ arc which --show-base --base 'git:HEAD'
HEAD
$ arc which --show-base --base 'git:fake'
Usage Exception: None of the rules in your 'base' configuration matched a valid commit. Adjust rules or specify which commit you want to use explicitly.
$ arc which --show-base --base 'git:origin/master'
origin/master
$ arc which --show-base --base 'git:upstream'
Usage Exception: None of the rules in your 'base' configuration matched a valid commit. Adjust rules or specify which commit you want to use explicitly.
$ arc which --show-base --base 'literal:derp'
derp
$ arc which --show-base --base 'arc:halt'
Usage Exception: None of the rules in your 'base' configuration matched a valid commit. Adjust rules or specify which commit you want to use explicitly.
$ arc set-config --local base git:origin/master
Set key 'base' = 'git:origin/master' in local config.
$ arc which --show-base
origin/master
$ arc which --show-base --base 'git:HEAD^'
HEAD^
$ arc which --show-base --base 'arc:yield, git:HEAD^'
origin/master
$ arc which --show-base --base 'arc:global, git:HEAD^'
HEAD^
$ arc which --show-base --base 'arc:global, git:merge-base(origin/master)'
3f4f8992fba8d1f142974da36a82bae900e247c0```
Reviewers: dschleimer, vrana
Reviewed By: dschleimer
CC: aran
Maniphest Tasks: T1233
Differential Revision: https://secure.phabricator.com/D2748
Summary:
We currently use the language "relative commit" or "relative local commit" to refer to the head of a commit range. I want to move toward callign this a "base commit", since I think that makes more sense. This moves us a small step in that direction.
The DSL stuff in T1233 also needs access to this stuff, so move it up to the base. This is mostly a bite-sized piece of the change in that diff.
Test Plan: Ran "arc which" in a couple of circumstances, read explanations.
Reviewers: dschleimer, vrana
Reviewed By: dschleimer
CC: aran
Maniphest Tasks: T1233
Differential Revision: https://secure.phabricator.com/D2747
Summary:
Using .arc as the scratch and per-repository configuration directory
has some unfortunate consequenses in the real world. Among other
things, people forget to .gitignore it so it gets checked in.
Test Plan:
the only thing that seems to use this is the relative commit setting
for git. This diff consists of 2 commits, one for the .gitignore and
one for everything else.
Comment out the portion of my .git/config that defines the upstream
for the branch. Run arc diff --only with HEAD^ in
.arc/default-relative-commit. See that .gitignore is not included in
the resultant diff, that .arc no longer exists, and that .git/arc
exists and has HEAD^ in .git/arc/default-relative-commit.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1233
Differential Revision: https://secure.phabricator.com/D2725
Summary:
This adds basic support for mutable history for arc diff and arc amend for
mercurial. This is purely opt-in (so it shouldn't affect anyone who doesn't want
this feature) by explicitly setting
"immutable_history" : false
in arc configuration.
This also fixes another instance of weird behaviour for multiple heads - the
first instance was fixed here:
https://github.com/facebook/arcanist/pull/28
Test Plan:
without "immutable_history" turned on)>
When ##arc diff## produces an update diff, it should list only commits that are
ancestors of the current revision - not ones from other heads.
Reviewers: epriestley
CC: csilvers, aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2654
