Summary:
Previously, trying to arc land in a mercurial repo would
fail if the local branch was already at the tip of the onto branch
(since hg rebase exited with code 1). This change makes it check
if a rebase is needed before executing the rebase.
Test Plan:
hg init foo
cd foo
hg bookmark master
touch a && hg add a && hg commit -ma
// setup your .arcconfig
cd ..
hg clone foo foo2
cd foo2
hg bookmark mybook
touch b && hg add b && hg commit -mb
arc land --onto master --revision <your rev number>
Arc land should succeed. I also tried landing when a rebase was
necessary and it still worked.
Reviewers: epriestley, dschleimer, bos
Reviewed By: epriestley
CC: sid0, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4588
Summary:
Fixes T2138.
- When a pull fails, restore the original branch.
- When a push fails, complain about it really loudly.
NOTE: No test plan for push yet since I'm not sure this is the right remedy, see T2138 for discsusion.
Test Plan:
- Tested pull by changing "git pull" to "git xxpull" and running "arc land". Saw the pull fail and my original branch restored.
Reviewers: vrana, aran
Reviewed By: vrana
Maniphest Tasks: T2138
Differential Revision: https://secure.phabricator.com/D4265
Summary:
See D4049, D4096.
- Move commit range storage from Mercurial and Git APIs to the base API.
- Move caching up to the base level.
- Store symbolic name and resolved name separately, so we can re-resolve the correct commit from the symbolic name after dirtying caches.
- Rename `supportsRelativeLocalCommit()` to `supportsCommitRanges()` (old name wasn't very good, and not consistent with new terminology like the `--base` flag).
- Rename `getRelativeCommit()` and `setRelativeCommit()` to `getBaseCommit()` and `setBaseCommit()`.
- Introduce `reloadCommitRange()` and call it from `reloadWorkingCopy()`.
I think this fixes the problem in D4049, and provides a general solution for the class of problems we're running into here, with D4096. Specifically:
- We no longer get dirty caches, as long as you call reloadWorkingCopy() after changing the working copy (or call a method which calls it for you).
- We no longer get order-of-parsing-things problems, because setBaseCommit() reloads the appropriate caches.
- We no longer get nasty effects from calling `requireCleanWorkingCopy()` too early.
Test Plan: This is pretty far-reaching and hard to test. Unit tests; ran various arc commands. :/
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4097
Summary:
This changes arc land's hg support to allow you to land a branch or bookmark that has nested branches/bookmarks. Example:
// Initial state:
// -a--------b master
// \
// w--x mybranch
// \--y subbranch1
// \--z subbranch2
//
// arc land --branch mybranch --onto master :
// -a--b--wx master
// \--y subbranch1
// \--z subbranch2
Test Plan:
Created several repos like in the summary and ran 'arc land' and 'arc land --keep-branch'. Did this with both bookmarks and named branches. Scenarios tested:
- mybranch having no child commits
- mybranch having a child branch with several commits
- mybranch having two child branches
- mybranch having a child branch which has two more child branches
No code was added outside of a "if ($this->isHg)" so I didn't run git arc land.
Reviewers: epriestley, dschleimer, bos, sid0
Reviewed By: dschleimer
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4089
Summary:
See chatlog from https://secure.phabricator.com/chatlog/channel/%23phabricator/?at=37257
Basically, the install's developers sometimes use "git merge master" instead of "git rebase master" to pull changes from master into their branch. When we run "git rebase master" at the end, this creates a lot of conflicts.
Instead, optionally run "git merge master". This should be equivalent in our case (where we always rebase) and much better in their case (where they sometimes merge).
We're both going to use it for a bit and see if it creates problems. If it improves the "sometimes-merge" workflow without affecting the "always rebase" workflow, we can make it a default. If it improves theirs but damages ours, we can keep it a flag/option. If it's just terrible, we can figure out something else.
Test Plan:
Ran `arc land --mergeup --trace <feature> --keep-branch --hold`, see P624 for output. Observed merge update strategy and general success.
Also verified the conflict:
$ arc land --mergeup --merge
Usage Exception: Arguments '--mergeup' and '--merge' are mutually exclusive: The --merge strategy does not update the feature branch.
Reviewers: btrahan, vrana, DurhamGoode
Reviewed By: btrahan
CC: aran, keir
Differential Revision: https://secure.phabricator.com/D4080
Summary:
Makes arc land support hg repositories. Both bookmarks and named branches can be landed. For the most part all the arc land options work, but there are a few caveats:
- bookmarks can only be landed on bookmarks
- branches can only be landed on branches
- landing a named branch with --merge creates a commit to close the branch before the merge.
- since mercurial doesn't start with a default master bookmark, landing a bookmark requires specifying --onto or setting arc.land.onto.default
Test Plan:
Tested arc land with all permutations of --merge, --keep-branch on both bookmark branches and named branches. Also tested --hold, --revision, --onto, --remote.
See https://secure.phabricator.com/P619
Also tested git arc land with --merge and --keep-branch.
Reviewers: dschleimer, sid0, epriestley, bos
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4068
Summary:
See discussion in D4056. In `findRevision()` we call `loadWorkingCopyDifferentialRevisions()`. However, this method depends upon the state of the working copy, because the end of the commit range it examines is HEAD. Prior to D4056 we checked out the target branch before calling `findRevision()`; after D4056 we call it earlier.
This isn't problematic in the `arc land` case, but in the `arc land <branch>` case it means we may fail to identify a revision, or identify the wrong revision, because HEAD isn't where we expect it to be.
Instead, unconditionally check out the target branch before finding the revision.
See <http://dl.dropbox.com/u/116385/Slingshot/Pictures/Screen%20Shot%202012-12-03%20at%203.43.45%20PM.png> for a transcript of the issue.
Test Plan: Reproduced issue as per link above. Ran `arc land --keep-branch --hold somebranch` successfully after this patch.
Reviewers: DurhamGoode, zeeg
Reviewed By: DurhamGoode
CC: aran
Differential Revision: https://secure.phabricator.com/D4072
Summary:
Refactor the arc land code into several
functions so it's easier to maintain. This is in
preparation for adding hg support to arc land
in my next commit.
Without this refactor, adding hg support makes the run()
function too big.
Test Plan:
Set up a git repo and clone with a branch scenario.
Example: https://secure.phabricator.com/P614
Ran and verified:
arc land
arc land --keep-branch
arc land --merge
arc land --merge --keep-branch
arc land --hold
arc land --revision <another phabricator rev>
Reviewers: epriestley
Reviewed By: epriestley
CC: dschleimer, sid0, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4056
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in unit tests and LICENSE file.
Reviewers: epriestley, btrahan, edward
Reviewed By: epriestley
CC: aran, Korvin, davidrecordon
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3881
Summary:
Currently, adding a new workflow requires you to override ArcanistConfiguration, which is messy. Instead, just load everything that extends ArcanistBaseWorkflow.
Remove all the rules tying workflow names to class names through arcane incantations.
This has a very small performance cost in that we need to load every Workflow class every time now, but we don't hit __init__ and such anymore and it was pretty negligible on my machine (98ms vs 104ms or something).
Test Plan: Ran "arc help", "arc which", "arc diff", etc.
Reviewers: edward, vrana, btrahan
Reviewed By: edward
CC: aran, zeeg
Differential Revision: https://secure.phabricator.com/D3691
Summary: Allow the default to be set in global config, not just project config.
Test Plan: `arc set-config arc.land.onto.default derp; arc land`
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2686
