Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
<?php
|
|
|
|
|
|
|
|
abstract class PhabricatorInlineCommentController
|
|
|
|
extends PhabricatorController {
|
|
|
|
|
|
|
|
abstract protected function createComment();
|
|
|
|
abstract protected function loadComment($id);
|
|
|
|
abstract protected function loadCommentForEdit($id);
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
abstract protected function loadCommentForDone($id);
|
2015-03-08 13:04:38 -07:00
|
|
|
abstract protected function loadCommentByPHID($phid);
|
2015-03-27 17:08:31 -07:00
|
|
|
abstract protected function loadObjectOwnerPHID(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment $inline);
|
2014-02-18 16:25:16 -08:00
|
|
|
abstract protected function deleteComment(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment $inline);
|
2015-07-21 11:36:46 -07:00
|
|
|
abstract protected function undeleteComment(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment $inline);
|
2014-02-18 16:25:16 -08:00
|
|
|
abstract protected function saveComment(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment $inline);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Allow inline comments to be individually hidden
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
2015-05-27 10:28:38 -07:00
|
|
|
protected function hideComments(array $ids) {
|
|
|
|
throw new PhutilMethodNotImplementedException();
|
|
|
|
}
|
|
|
|
|
|
|
|
protected function showComments(array $ids) {
|
|
|
|
throw new PhutilMethodNotImplementedException();
|
|
|
|
}
|
|
|
|
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
private $changesetID;
|
|
|
|
private $isNewFile;
|
|
|
|
private $isOnRight;
|
|
|
|
private $lineNumber;
|
|
|
|
private $lineLength;
|
|
|
|
private $commentText;
|
|
|
|
private $operation;
|
|
|
|
private $commentID;
|
2015-03-05 14:11:51 -08:00
|
|
|
private $renderer;
|
2015-03-08 13:04:38 -07:00
|
|
|
private $replyToCommentPHID;
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
|
|
|
public function getCommentID() {
|
|
|
|
return $this->commentID;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getOperation() {
|
|
|
|
return $this->operation;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getCommentText() {
|
|
|
|
return $this->commentText;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getLineLength() {
|
|
|
|
return $this->lineLength;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getLineNumber() {
|
|
|
|
return $this->lineNumber;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getIsOnRight() {
|
|
|
|
return $this->isOnRight;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getChangesetID() {
|
|
|
|
return $this->changesetID;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getIsNewFile() {
|
|
|
|
return $this->isNewFile;
|
|
|
|
}
|
|
|
|
|
2015-03-05 14:11:51 -08:00
|
|
|
public function setRenderer($renderer) {
|
|
|
|
$this->renderer = $renderer;
|
|
|
|
return $this;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getRenderer() {
|
|
|
|
return $this->renderer;
|
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2015-03-08 13:04:38 -07:00
|
|
|
public function setReplyToCommentPHID($phid) {
|
|
|
|
$this->replyToCommentPHID = $phid;
|
|
|
|
return $this;
|
|
|
|
}
|
|
|
|
|
|
|
|
public function getReplyToCommentPHID() {
|
|
|
|
return $this->replyToCommentPHID;
|
|
|
|
}
|
|
|
|
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
public function processRequest() {
|
|
|
|
$request = $this->getRequest();
|
2018-09-04 11:26:30 -07:00
|
|
|
$viewer = $this->getViewer();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
|
|
|
$this->readRequestParameters();
|
|
|
|
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
$op = $this->getOperation();
|
|
|
|
switch ($op) {
|
Allow inline comments to be individually hidden
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
2015-05-27 10:28:38 -07:00
|
|
|
case 'hide':
|
|
|
|
case 'show':
|
|
|
|
if (!$request->validateCSRF()) {
|
|
|
|
return new Aphront404Response();
|
|
|
|
}
|
|
|
|
|
|
|
|
$ids = $request->getStrList('ids');
|
|
|
|
if ($ids) {
|
|
|
|
if ($op == 'hide') {
|
|
|
|
$this->hideComments($ids);
|
|
|
|
} else {
|
|
|
|
$this->showComments($ids);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return id(new AphrontAjaxResponse())->setContent(array());
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
case 'done':
|
|
|
|
if (!$request->validateCSRF()) {
|
|
|
|
return new Aphront404Response();
|
|
|
|
}
|
|
|
|
$inline = $this->loadCommentForDone($this->getCommentID());
|
|
|
|
|
2015-03-27 17:08:31 -07:00
|
|
|
$is_draft_state = false;
|
2017-05-15 13:08:55 -07:00
|
|
|
$is_checked = false;
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
switch ($inline->getFixedState()) {
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
case PhabricatorInlineComment::STATE_DRAFT:
|
|
|
|
$next_state = PhabricatorInlineComment::STATE_UNDONE;
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
break;
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
case PhabricatorInlineComment::STATE_UNDRAFT:
|
|
|
|
$next_state = PhabricatorInlineComment::STATE_DONE;
|
2017-05-15 13:08:55 -07:00
|
|
|
$is_checked = true;
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
break;
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
case PhabricatorInlineComment::STATE_DONE:
|
|
|
|
$next_state = PhabricatorInlineComment::STATE_UNDRAFT;
|
2015-03-27 17:08:31 -07:00
|
|
|
$is_draft_state = true;
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
break;
|
|
|
|
default:
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
case PhabricatorInlineComment::STATE_UNDONE:
|
|
|
|
$next_state = PhabricatorInlineComment::STATE_DRAFT;
|
2015-03-27 17:08:31 -07:00
|
|
|
$is_draft_state = true;
|
2017-05-15 13:08:55 -07:00
|
|
|
$is_checked = true;
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
$inline->setFixedState($next_state)->save();
|
|
|
|
|
2015-03-27 17:08:31 -07:00
|
|
|
return id(new AphrontAjaxResponse())
|
|
|
|
->setContent(
|
|
|
|
array(
|
2017-05-15 13:08:55 -07:00
|
|
|
'isChecked' => $is_checked,
|
2015-03-27 17:08:31 -07:00
|
|
|
'draftState' => $is_draft_state,
|
|
|
|
));
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
case 'delete':
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
case 'undelete':
|
|
|
|
case 'refdelete':
|
|
|
|
if (!$request->validateCSRF()) {
|
|
|
|
return new Aphront404Response();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|
|
|
|
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
// NOTE: For normal deletes, we just process the delete immediately
|
|
|
|
// and show an "Undo" action. For deletes by reference from the
|
|
|
|
// preview ("refdelete"), we prompt first (because the "Undo" may
|
|
|
|
// not draw, or may not be easy to locate).
|
|
|
|
|
|
|
|
if ($op == 'refdelete') {
|
|
|
|
if (!$request->isFormPost()) {
|
|
|
|
return $this->newDialog()
|
|
|
|
->setTitle(pht('Really delete comment?'))
|
|
|
|
->addHiddenInput('id', $this->getCommentID())
|
|
|
|
->addHiddenInput('op', $op)
|
|
|
|
->appendParagraph(pht('Delete this inline comment?'))
|
|
|
|
->addCancelButton('#')
|
|
|
|
->addSubmitButton(pht('Delete'));
|
|
|
|
}
|
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
$is_delete = ($op == 'delete' || $op == 'refdelete');
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
$inline = $this->loadCommentForEdit($this->getCommentID());
|
2015-07-21 11:36:46 -07:00
|
|
|
|
|
|
|
if ($is_delete) {
|
|
|
|
$this->deleteComment($inline);
|
|
|
|
} else {
|
|
|
|
$this->undeleteComment($inline);
|
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
When deleting inline comments, offer "undo" instead of prompting
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
2015-03-09 17:27:51 -07:00
|
|
|
return $this->buildEmptyResponse();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
case 'edit':
|
|
|
|
$inline = $this->loadCommentForEdit($this->getCommentID());
|
|
|
|
$text = $this->getCommentText();
|
|
|
|
|
|
|
|
if ($request->isFormPost()) {
|
|
|
|
if (strlen($text)) {
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
$inline
|
|
|
|
->setContent($text)
|
|
|
|
->setIsEditing(false);
|
|
|
|
|
2014-02-18 16:25:16 -08:00
|
|
|
$this->saveComment($inline);
|
2020-05-04 10:52:12 -07:00
|
|
|
$this->purgeVersionedDrafts($inline);
|
|
|
|
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
return $this->buildRenderedCommentResponse(
|
|
|
|
$inline,
|
|
|
|
$this->getIsOnRight());
|
|
|
|
} else {
|
2014-02-18 16:25:16 -08:00
|
|
|
$this->deleteComment($inline);
|
2020-05-04 10:52:12 -07:00
|
|
|
$this->purgeVersionedDrafts($inline);
|
|
|
|
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
return $this->buildEmptyResponse();
|
|
|
|
}
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
} else {
|
|
|
|
$inline->setIsEditing(true);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
if (strlen($text)) {
|
|
|
|
$inline->setContent($text);
|
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
$this->saveComment($inline);
|
2020-05-04 13:55:43 -07:00
|
|
|
|
|
|
|
if (strlen($text)) {
|
|
|
|
$this->purgeVersionedDrafts($inline);
|
|
|
|
}
|
|
|
|
|
|
|
|
PhabricatorInlineComment::loadAndAttachVersionedDrafts(
|
|
|
|
$viewer,
|
|
|
|
array($inline));
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
$edit_dialog = $this->buildEditDialog($inline)
|
|
|
|
->setTitle(pht('Edit Inline Comment'));
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2015-03-08 14:00:08 -07:00
|
|
|
$view = $this->buildScaffoldForView($edit_dialog);
|
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
return $this->newInlineResponse($inline, $view);
|
When a user clicks "Cancel" on an inline comment to leave the "Editing" state, save the state change
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
2020-04-29 11:25:43 -07:00
|
|
|
case 'cancel':
|
|
|
|
$inline = $this->loadCommentForEdit($this->getCommentID());
|
|
|
|
|
|
|
|
$inline->setIsEditing(false);
|
|
|
|
|
Refine unusual inline comment client interactions
Summary: Ref T13513. Refine some inline behaviors, see test plan.
Test Plan:
- Edit a comment ("A"), type text ("AB"), cancel, edit.
- Old behavior: edit and undo states (wrong, and undo does not function).
- New behavior: edit state only.
- Edit a comment ("A"), type text ("AB"), cancel. Undo ("AB"), cancel. Edit.
- Old behavior: "AB" (wrong: you never submitted this text).
- New behavior: "A".
- Create a comment, type text, cancel.
- Old behavior: counter appears in filetree (wrong, comment is undo-able but should not be counted).
- New behavior: no counter.
- Cancel editing an empty comment with no text.
- Old behavior: Something buggy -- undo, I think?
- New behavior: it just vanishes (correct behavior).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21212
2020-05-04 09:22:23 -07:00
|
|
|
// If the user uses "Undo" to get into an edited state ("AB"), then
|
|
|
|
// clicks cancel to return to the previous state ("A"), we also want
|
|
|
|
// to set the stored state back to "A".
|
|
|
|
$text = $this->getCommentText();
|
|
|
|
if (strlen($text)) {
|
|
|
|
$inline->setContent($text);
|
|
|
|
}
|
|
|
|
|
When a user clicks "Cancel" on an inline comment to leave the "Editing" state, save the state change
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
2020-04-29 11:25:43 -07:00
|
|
|
$content = $inline->getContent();
|
|
|
|
if (!strlen($content)) {
|
|
|
|
$this->deleteComment($inline);
|
|
|
|
} else {
|
|
|
|
$this->saveComment($inline);
|
|
|
|
}
|
|
|
|
|
2020-05-04 10:52:12 -07:00
|
|
|
$this->purgeVersionedDrafts($inline);
|
|
|
|
|
|
|
|
return $this->buildEmptyResponse();
|
|
|
|
case 'draft':
|
|
|
|
$inline = $this->loadCommentForEdit($this->getCommentID());
|
|
|
|
|
|
|
|
$versioned_draft = PhabricatorVersionedDraft::loadOrCreateDraft(
|
|
|
|
$inline->getPHID(),
|
|
|
|
$viewer->getPHID(),
|
|
|
|
$inline->getID());
|
|
|
|
|
|
|
|
$text = $this->getCommentText();
|
|
|
|
|
|
|
|
$versioned_draft
|
|
|
|
->setProperty('inline.text', $text)
|
|
|
|
->save();
|
|
|
|
|
When a user clicks "Cancel" on an inline comment to leave the "Editing" state, save the state change
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
2020-04-29 11:25:43 -07:00
|
|
|
return $this->buildEmptyResponse();
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
case 'new':
|
|
|
|
case 'reply':
|
|
|
|
default:
|
|
|
|
// NOTE: We read the values from the client (the display values), not
|
|
|
|
// the values from the database (the original values) when replying.
|
|
|
|
// In particular, when replying to a ghost comment which was moved
|
|
|
|
// across diffs and then moved backward to the most recent visible
|
|
|
|
// line, we want to reply on the display line (which exists), not on
|
|
|
|
// the comment's original line (which may not exist in this changeset).
|
|
|
|
$is_new = $this->getIsNewFile();
|
|
|
|
$number = $this->getLineNumber();
|
|
|
|
$length = $this->getLineLength();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
|
|
|
$inline = $this->createComment()
|
|
|
|
->setChangesetID($this->getChangesetID())
|
2018-09-04 11:26:30 -07:00
|
|
|
->setAuthorPHID($viewer->getPHID())
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
->setIsNewFile($is_new)
|
|
|
|
->setLineNumber($number)
|
|
|
|
->setLineLength($length)
|
|
|
|
->setContent($this->getCommentText())
|
|
|
|
->setReplyToCommentPHID($this->getReplyToCommentPHID())
|
|
|
|
->setIsEditing(true);
|
2015-03-08 13:04:38 -07:00
|
|
|
|
2018-09-04 11:33:28 -07:00
|
|
|
// If you own this object, mark your own inlines as "Done" by default.
|
|
|
|
$owner_phid = $this->loadObjectOwnerPHID($inline);
|
|
|
|
if ($owner_phid) {
|
|
|
|
if ($viewer->getPHID() == $owner_phid) {
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
$fixed_state = PhabricatorInlineComment::STATE_DRAFT;
|
2018-09-04 11:33:28 -07:00
|
|
|
$inline->setFixedState($fixed_state);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-02-18 16:25:16 -08:00
|
|
|
$this->saveComment($inline);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
$edit_dialog = $this->buildEditDialog($inline);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
|
|
|
if ($this->getOperation() == 'reply') {
|
2014-02-28 08:40:02 -08:00
|
|
|
$edit_dialog->setTitle(pht('Reply to Inline Comment'));
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
} else {
|
2014-02-28 08:40:02 -08:00
|
|
|
$edit_dialog->setTitle(pht('New Inline Comment'));
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|
|
|
|
|
2015-03-08 14:00:08 -07:00
|
|
|
$view = $this->buildScaffoldForView($edit_dialog);
|
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
return $this->newInlineResponse($inline, $view);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
private function readRequestParameters() {
|
|
|
|
$request = $this->getRequest();
|
|
|
|
|
|
|
|
// NOTE: This isn't necessarily a DifferentialChangeset ID, just an
|
|
|
|
// application identifier for the changeset. In Diffusion, it's a Path ID.
|
2015-03-08 13:04:38 -07:00
|
|
|
$this->changesetID = $request->getInt('changesetID');
|
2015-03-05 14:11:51 -08:00
|
|
|
|
|
|
|
$this->isNewFile = (int)$request->getBool('is_new');
|
|
|
|
$this->isOnRight = $request->getBool('on_right');
|
|
|
|
$this->lineNumber = $request->getInt('number');
|
|
|
|
$this->lineLength = $request->getInt('length');
|
|
|
|
$this->commentText = $request->getStr('text');
|
|
|
|
$this->commentID = $request->getInt('id');
|
|
|
|
$this->operation = $request->getStr('op');
|
|
|
|
$this->renderer = $request->getStr('renderer');
|
2015-03-08 13:04:38 -07:00
|
|
|
$this->replyToCommentPHID = $request->getStr('replyToCommentPHID');
|
|
|
|
|
|
|
|
if ($this->getReplyToCommentPHID()) {
|
|
|
|
$reply_phid = $this->getReplyToCommentPHID();
|
|
|
|
$reply_comment = $this->loadCommentByPHID($reply_phid);
|
|
|
|
if (!$reply_comment) {
|
|
|
|
throw new Exception(
|
|
|
|
pht('Failed to load comment "%s".', $reply_phid));
|
|
|
|
}
|
|
|
|
|
2016-03-10 16:05:08 -08:00
|
|
|
// When replying, force the new comment into the same location as the
|
|
|
|
// old comment. If we don't do this, replying to a ghost comment from
|
|
|
|
// diff A while viewing diff B can end up placing the two comments in
|
|
|
|
// different places while viewing diff C, because the porting algorithm
|
|
|
|
// makes a different decision. Forcing the comments to bind to the same
|
|
|
|
// place makes sure they stick together no matter which diff is being
|
|
|
|
// viewed. See T10562 for discussion.
|
|
|
|
|
|
|
|
$this->changesetID = $reply_comment->getChangesetID();
|
2015-05-08 07:06:14 -07:00
|
|
|
$this->isNewFile = $reply_comment->getIsNewFile();
|
2016-03-10 16:05:08 -08:00
|
|
|
$this->lineNumber = $reply_comment->getLineNumber();
|
|
|
|
$this->lineLength = $reply_comment->getLineLength();
|
2015-03-08 13:04:38 -07:00
|
|
|
}
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
private function buildEditDialog(PhabricatorInlineComment $inline) {
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
$request = $this->getRequest();
|
2018-09-04 11:26:30 -07:00
|
|
|
$viewer = $this->getViewer();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2015-03-06 05:11:29 -08:00
|
|
|
$edit_dialog = id(new PHUIDiffInlineCommentEditView())
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
->setViewer($viewer)
|
|
|
|
->setInlineComment($inline)
|
2015-03-09 12:53:40 -07:00
|
|
|
->setIsOnRight($this->getIsOnRight())
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
->setRenderer($this->getRenderer());
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
|
|
|
return $edit_dialog;
|
|
|
|
}
|
|
|
|
|
|
|
|
private function buildEmptyResponse() {
|
|
|
|
return id(new AphrontAjaxResponse())
|
|
|
|
->setContent(
|
|
|
|
array(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
'inline' => array(),
|
|
|
|
'view' => null,
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
));
|
|
|
|
}
|
|
|
|
|
|
|
|
private function buildRenderedCommentResponse(
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment $inline,
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
$on_right) {
|
|
|
|
|
|
|
|
$request = $this->getRequest();
|
2018-09-04 11:26:30 -07:00
|
|
|
$viewer = $this->getViewer();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2012-10-23 17:33:58 -07:00
|
|
|
$engine = new PhabricatorMarkupEngine();
|
2018-09-04 11:26:30 -07:00
|
|
|
$engine->setViewer($viewer);
|
2012-10-23 17:33:58 -07:00
|
|
|
$engine->addObject(
|
|
|
|
$inline,
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
PhabricatorInlineComment::MARKUP_FIELD_BODY);
|
2012-10-23 17:33:58 -07:00
|
|
|
$engine->process();
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2018-09-04 11:26:30 -07:00
|
|
|
$phids = array($viewer->getPHID());
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
2012-09-04 19:02:56 -07:00
|
|
|
$handles = $this->loadViewerHandles($phids);
|
2015-03-27 17:08:31 -07:00
|
|
|
$object_owner_phid = $this->loadObjectOwnerPHID($inline);
|
2015-03-27 11:23:10 -07:00
|
|
|
|
2015-03-06 05:11:29 -08:00
|
|
|
$view = id(new PHUIDiffInlineCommentDetailView())
|
2018-09-04 11:26:30 -07:00
|
|
|
->setUser($viewer)
|
2015-03-05 14:11:51 -08:00
|
|
|
->setInlineComment($inline)
|
2015-03-09 12:53:40 -07:00
|
|
|
->setIsOnRight($on_right)
|
2015-03-05 14:11:51 -08:00
|
|
|
->setMarkupEngine($engine)
|
|
|
|
->setHandles($handles)
|
Track a "Done" state on inline comments
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
2015-03-09 18:41:47 -07:00
|
|
|
->setEditable(true)
|
2015-03-27 11:23:10 -07:00
|
|
|
->setCanMarkDone(false)
|
|
|
|
->setObjectOwnerPHID($object_owner_phid);
|
2015-03-06 05:44:36 -08:00
|
|
|
|
2015-03-08 14:00:08 -07:00
|
|
|
$view = $this->buildScaffoldForView($view);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
return $this->newInlineResponse($inline, $view);
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|
|
|
|
|
2015-03-08 14:00:08 -07:00
|
|
|
private function buildScaffoldForView(PHUIDiffInlineCommentView $view) {
|
|
|
|
$renderer = DifferentialChangesetHTMLRenderer::getHTMLRendererByKey(
|
|
|
|
$this->getRenderer());
|
|
|
|
|
|
|
|
$view = $renderer->getRowScaffoldForInline($view);
|
|
|
|
|
|
|
|
return id(new PHUIDiffInlineCommentTableScaffold())
|
|
|
|
->addRowScaffold($view);
|
|
|
|
}
|
|
|
|
|
Make "editing" state persistent for inline comments
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
2020-04-28 14:45:54 -07:00
|
|
|
private function newInlineResponse(
|
|
|
|
PhabricatorInlineComment $inline,
|
|
|
|
$view) {
|
|
|
|
|
|
|
|
$response = array(
|
|
|
|
'inline' => array(
|
|
|
|
'id' => $inline->getID(),
|
|
|
|
),
|
|
|
|
'view' => hsprintf('%s', $view),
|
|
|
|
);
|
|
|
|
|
|
|
|
return id(new AphrontAjaxResponse())
|
|
|
|
->setContent($response);
|
|
|
|
}
|
|
|
|
|
2020-05-04 10:52:12 -07:00
|
|
|
private function purgeVersionedDrafts(
|
|
|
|
PhabricatorInlineComment $inline) {
|
|
|
|
$viewer = $this->getViewer();
|
|
|
|
PhabricatorVersionedDraft::purgeDrafts(
|
|
|
|
$inline->getPHID(),
|
|
|
|
$viewer->getPHID());
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Add inline comments to Diffusion/Audit
Summary:
- Add inline comments to Audits, like Differential.
- Creates new storage for the comments in the Audits database.
- Creates a new PhabricatorAuditInlineComment class, similar to DifferentialInlineComment.
- Defines an Interface which Differential and Audit comments conform to.
- Makes consumers of DifferentialInlineComments consume objects which implement that interface instead.
- Adds save
NOTE: Some features are still missing! Wanted to cut this off before it got crazy:
- Inline comments aren't shown in the main comment list.
- Inline comments aren't shown in the emails.
- Inline comments aren't previewed.
I'll followup with those but this was getting pretty big.
@vrana, does the SQL change look correct?
Test Plan:
- Created, edited, deleted, replied to, reloaded and saved inline comments in Diffusion, on the left and right side of diffs.
- Created, edited, deleted, replied to, reloaded and saved inline comments in Differentila, on the left and right side of primary and diff-versus-diff diffs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1898
2012-03-14 12:56:01 -07:00
|
|
|
}
|